2023 Wrenching News Spring Antique Wrench Auction - York, Nebraska

The first two lots of this auction features two fairly common wrenches in very uncommon condition.

0001. BEMIS & CALL CO. COMB / BILLINGS MADE IN USA SPRINGFIELD, MASS. ROCK ISLAND LINES - - 16" wooden handled combination nut and pipe wrench with long hex adjusting sleeve and a replaceable lower pipe jaw insert. Dual marked with both Bemis & Call and Billings plus Rock Island Railroad. Patented Dec 2, 1873 by W. Chaplin Bemis also of Springfield. Absolutely mint, new old stock. (similar to S837) *PAT*

0002. W & B CO MADE IN USA (with a diamond logo) (Whitman & Barnes) - - 12" knife slab type wooden handled monkey wrench. Excellent, like new old stock as found on the hardware store shelf.

0003. Unmarked - - 11.5" combination rack type quick adjust nut and pipe wrench with lever to tighten the jaws with a hammer, nail claw and wire cutter. Rare combination tool advertised as Tritt's Lambert Patent. Manufactured by Edward C. Tritt of Union City, Indiana. Patent was issued to Charles M. Lambert of Darke County, Ohio on Nov, 4, 1902. Excellent with most of the original nickel plating. (see S806 for variant.) *PAT*

0004. E. RIPLEY'S PATENT - APRIL 7, 1857 (same markings on both sides) - - 12.5" malleable iron combination hammer, screwdriver, and rack type quick adjust wrench. An early pre Civil war patented combination tool. Good with pitting and end of fixed jaw is missing. (S824) *PAT*

0005. SCHLOTE AUTOMATIC PATENT MADE IN GERMANY / MFD. FOR - SCHOLT BROS. INC- CHICAGO, ILL - USA - MADE IN - GERMANY - - 9.5" quick adjust nut wrench with helical shaft and sliding collar similar to Handee wrenches but much rarer. Patented by Royal H. Schlote of Milwaukee, Wisc. on Aug. 17, 1948. First one seen with the Made in Germany markings. Good++, doesn't adjust properly) (similar but different to S529) *PAT*

0006. THE HAMMOND MFG. CO. - BOSTON, MASS USA / PATENTED APRIL 3. 1900 - - 12" quick adjust rack type wrench with a lever that releases the upper jaw. Patent was issued to Edward Wright of Worcester, Mass. Good+. (S676) *PAT*

PiCs Lots 1 thru 6

0007. Unmarked - - 10" self adjusting wrench. First one seen. Excellent with most of the original plating. (not listed, no info found)

0008. TROJAN WRENCHES L. A. CAL. / US PAT NO 1968783 - - 11.5" quick adjust wrench with a lever that releases the rack teeth. Patented by John R. Long, of Los Angeles, CA. Excellent. (S721) *PAT*

0009. KWIKSET - A. G. PIPE WRENCH 14 / DROP FORGED STEEL ("D" in a circle logo) - - 12.25"" quick adjust rack type pipe wrench with lever that controls the upper jaw. Mfg. by the Mechanics Wrench and Tool Company, Marshalltown, IA. Patented on Sept. 7, 1926 by Carl, Emil, and Sigfred Bjornson from Bentley, Alberta, Canada. The A. and G. on the wrench stands for Adams and Grey (for Joe Adams and Archie Gray of Marshalltownm, Iowa). Shaft and lower jaw are excellent but the replacable upper jaw is pitted. (S686) *PAT*

0010. ALLEN WRENCH - PAT APL'S FOR - - 9" pivoting head self adjusting alligator wrench patented by John Bystrom of Chicago, Illinois on Oct. 13, 1903 and mfg. by the Norwall Mfg. Co., also of Chicago. RARE alligator wrench. Excellent condition with two depressions on the shaft. (C235) *PAT*

0011. RACINE GEN'L MFG. CO. / PAT'D RACINE, WIS. - - 8" odd double headed ratchet wrench with square sockets and angled heads Rare and different in Excellent condition. (C256, patent not found)

0012. NATHAN M'F'G CO. N.Y. - - 16". cast hook spanner wrench. The Nathan Co. made train whistles, etc. Excellent.

0013. Unmarked - - 10.75" chain wrench. Old weld repairs. (not listed, no info found)

0014. CIWCO (in script) No. 2604/300mm - - 12" odd auto type adjustable wrench with angled jaws and brass jaw inserts. Good++. (not listed, no info found)

0015. PAT JAN 9, 1877 - - 10.25" all metal cast malleable monkey wrench patented by O. B. North of New Haven, Conn. Scarce covered handle variant. Good with pitting. (S459) *PAT* and *PAT*

PiCs Lots 7 thru 15

0016. Unmarked - - 15.5" pier type pipe wrench with different adjustment setting holes in the shaft. Good++. (not listed)

0017. 15in TRIG-O-MATIC - PAT PEND. / "D" in a diamond logo - TRIG-O-MATIC TOOL CORP. - CHICAGO USA - FORGED STEEL - - 16.5" self adjusting pipe wrench. Patented by John Larson of Chicago on July 14, 1953. Excellent, like new. (S720) *PAT*

0018. A. HARVEY'S SONS MFG CO LTD DETROIT, MICH USA / HARVEY WRIGHT'S WRENCH PAT FEB 1910 - NOV 1911 (and A H S in a diamond logo) - - 16" quick adjust pipe wrench with rack teeth on side of shaft and sliding lower jaws assembly. Pat. by James F. Wright of Canton, Ohio. Excellent with some of the original finish. (S731) *PAT*

0019. THE BECKLIN WRENCH CO. SEATTLE, WASH / PAT MAR 16, 1920 60 CARBON STEEL - - 14" quick adjust rack wrench with unique pivoting release lever. Patentees were John H. Lagreid and Oscar Becklin both of Seattle. Good+ with some dings on one side of lower jaw. (S713) *PAT*

0020. EMPIRE - 18 - - 16" quick adjust pipe wrench patented in 1896 by James Pierce and in 1903 by Karl Peterson (founder of the Crescent Tool Co.) and mfg by William Hjorth & Co of Jamestown, New York. First example I have seen marked only "Empire" Good++. (S669) *PAT* and *PAT*

0021. Unmarked - - 17" adjustable pipe tongs with a sliding lower jaw that is reversible foe either pipe or nuts. Made by the Barnes Tool Co. of New Haven, Conn. and patented July 31, 1883 by Elbridge F. Barnes also of New Haven. Excellent except the nut end of the lower jaw is chipped. (C55) *PAT*

PiCs Lots 16 thru 21

0022. MF'D BY H. W. BAUM EVANS MILLS, N.Y. PAT. OCT. 1, 1907 - - 13" quick adjust rack type with a large hex adjusting nut on the bottom end of the shaft for final adjustment. Patent was issued to Charles Theoflus Holman of Meadville, Penn. Rare wrench with an unique look. Good++ with minor dings and weak markings. (not listed) *PAT*

0023. Unmarked - - 13.5" heavy duty double jawed coach wrench. Good++.

0024. Marked only No. 3 (Alexander & Eberhard - Akron, Ohio - - 14.5" wooden handled lever assisted self adjusting pipe wrench with a distinctive forked lever. Patented by William Eberhard of Akron, Ohio on Apr. 17, 1877. Good+ with minor handle cracks, replace handle nut. (S649) *PAT*

0025. MANVEL & LINDSAY, NEW YORK / LINDSAY'S PATENT DEC 12, 1865 - - 15" wood handled monkey wrench with a rib on back side of shaft that fits into a slot on the lower jaw. Patented by John Parker Lindsay of New Haven, Conn. Wrench was manufactured by several different companies including Coes with Marvel & Lindsay examples being the least often seen. Good++. (S402) *PAT*

0026. Unmarked (William Owen's Oct. 24, 1882 patent) - - 11.5" wood handled combination reversible ratchet drill brace and wrench with both nut and pipe jaws. The jaws are adjusted by a screw with both right and left handed threads for a "double screw" action. Patented by William Owen of Nashville, Tennessee. . Unique extremely rare wrench (only the second one seen). Wrench adjusts, ratchets and reverses but is pitted and has been professionally restored with an excellent replaced handle and adjusting nuts. (not listed) *PAT*

0027. Most of the markings are not readable (Hewet's Union Wrench - -12" nut wrench with a short wooden handle and a fluted adjusting sleeve. Patented by Henry Hewet of New York , NY. on March 22. An early with a striking appearance. Good+ with minor dings. (S397) *PAT*

0028. Unmarked - - 10." odd cast early ratchet with two square sockets in handle. Good++. (S170)

0029. ATLAS 10 - PAT 1888 - - 10.5" with a moveable upper jaw that can be adjusted to three different positions. Patented May 15, 1888 by Robert Copland of Eureka, Calif. and made in San Francisco, Calif. and New York, NY. Excellent. (S655) *PAT*

PiCs Lots 22 thru 29

0030. Lot of 3 Papec (Shortsville, NY) Wrenches
(1.) 106S - - 5.5" x 13 tee socket wrench. Marked on socket rather than tee end. Excellent.
(2.) 106S - - 6.25" x 13.25 tee socket wrench. Marked on tee end. Excellent.
(3.) 106T ) - - 6.5" by 12" tee socket wrench. Not listed in Rathbone's books but similar number and appearance to the listed 106S wrench. Good++.

0031. Lot of 2
(1.) 24794 (Aultman Taylor) - - 14". Excellent. (R3-11)
(2.) 1694? (Aultman Taylor) - - 14.25". Number not clear but matches the description of the No. 1694 wrench found in Aultman Taylor parts books for their steam engines, Pitted. (see R3-11 for the wrench pictured below the 24794 wrench)

0032. P (orphan) - - 12" neat odd ball. Excellent.

0033. 1280M (Minneapolis Threshing Machine Co) - - 11" Steam engine wrench. Good++. (R2-204)

0034. J. S. & CO - 6000 / UTILITY (Janney, Semple & Co. - Minneapolis, Minn.) - - 7.25" Deering Style. Good++. (R2-148)

0035. HERO - 319 / STERLING MFG CO (Sterling, Illinois) - - 13.5". Good+ with some light pitting, minor hammer damage on one edge. (R1-439)

0036. KING DRILL MFG CO (Nebraska City, Nebraska) / "P" in a rectangle logo - - 12". Good++. (R1-282)

PiCs Lots 30 thru 36

0037. A404 (Hayes Pump & Planter Co., Galva, Illinois) ) - - 7". Good+. (R1-227)

0038. TRADE - MARK? - S. B. C. P. CO. (in logo) (South Bend Chilled Plow Co.) / 379 - - 9.25" with hammer head. Good+, casting flaws on one jaw edge, weak logo markings as usually found. (R1-429)

0039. W1 (Belle City / IHC or MTM?) - - 8.25". Look like an over sized Deering style wrench. Belle city parts lists describe a W1 wench as an S-wrench like their 122B and 123 B wrenches which are doe-s wrenches. MTM's W1 wrench is a Deering type only thicker,. Blizzard's W1 wrench is a socket. Good+, painted

0040. Excellent. V388 (U. S. Wind Engine & Pump Co. - Batavia, Illinois - - 11". Good++, refinished. (R2-280)

0041. TREAD POWER (Appleton?) - - 11.5" Good++. (R2-278)

0042. Lot of 2
(1.) REED - - 8.25" Scarce square box by open end wench, Painted with medium pitting (not listed, no info found)
(2.) A D CO / A-68 (American Drill Co. - Marion, Indiana) - - 8.25". Panted with pitting. (R1-13)

0043. Lot of 2 Blizzard Mfg. Co. of Canton, Ohio Wrenches (R1-56, R2-36)
(1.) W7 - - 7.25" S-wrench. Good+.
(2.) W6 - - 11" double S-wrench. Light pitting.

0044. Lot of 2
(1.) BUCKEYE WRENCH - - 9.75" oddball. Good++, faint but readable markings. (See R2-44 - Buckeye Mower & Reaper Co, Akron, O.)
(2.) WRENCH - - 9.75" oddball like wrench above but without the open end opening. Weak markings, pitting.

PiCs Lots 37 thru 44

0045. Lot of 4
(1.) 40 with a "CH" logo (orphan) - - 13". Rathbone lists a Number 40 wrench for Brennan Kentucky Drills and Lindeman but no picture of either one. Good++.
(2.) 79 (orphan) - - 12" handle type with square box end. Excellent.
(3.) Unmarked (orphan) - - 13.25 " heavy cast odd ball. Medium pitting.
(4.) Unmarked (orphan) - - 12.5" cast odd ball with five openings. Light pitting.

0046. Lot of 4
(1.) 2 (raised) 114 (indented) (orphan) - - 10.25". Fair
(2.) H2 (orphan) - - 8". Pitted.
(3.) Unmarked (orphan) - - 9.5" five openings cast wrench. Excellent.
(4.) 73??? (can't read all the markings) - - 12.5". Largest Farmer S-Style wrench seen. Good++.

PiCs Lots 45 and 46

0047. Lot of 4 Silo Filling Machinery Type Wrenches
(1.) 42 (E. W. Ross?) - - 11.5" Excellent. (not listed)
(2.) 63 (orphan) - - 11.75". Good++. (not listed)
(3.) KL72 (EW Ross) 10.75". Good+. (R1-02, R2-251)
(4.) B72 (E. W. Ross?) - - 10". Excellent. (not listed)

0048. 8 (Moline Plow Co.) - - 10.5" malleable combination hammer, nail claw and square box wrench (hollow handle variation). Unreadable marking, pitting. (R332, Smith No. 185)

0049. 4332 (Nichols & Sheppard, Battle Creek, Mich.) - - 9" Massive socket. Good++ with casting flaw. (R2-217, Rathbone also shows as Sawer-Massey, see R2-259)

0050. Lot of 3
(1.) (Unmarked (orphan) - - 10.5". Neat odd ball with a hammer head, Jaw. missing.
(2.) Unmarked (orphan) - - 8". Heavy (3/4" thick) cast odd ball. Light pitting or casting roughness.
(3.) Unmarked (orphan) - - 13" unusual odd ball. Good++. (R1-504, odd ball page)

PiCs Lots 47 and 50

0051. ATHENS PLOW CO / B16 (Athens, Tenn.) - - 12" extra heavy. Good++. (R1-23)

0052. Lot of 2
(1.) P.20 (P20 - A. Ellwood Co. - Sycamore, Illinois) - - 14". Excellent. (R1-161)
(2.) 351D (orphan) - - 14.5". Never seen this one before. Good++, minor hammer damage on one jaw.

0053. Lot of 2
(1.) Unmarked (orphan) - - 16" large cast hook spanner. Good=.
(2.) T LAWTON - - 15". (not listed, no info found)

0054. Lot of 3
(1.) 520 (orphan) - - 8.75" single hex box end. Excellent.
(2.) 22-P (orphan) - - 9"
(3.) 5S CRANE / 28828 - - 7.25" . Excellent.

0055. Lot of 2
(1.) 6522 (H. B. Collins Supply Co. - Sanville, ILL.) - - 10.75". Oddball with two open ends and a slotted round end (for wing nuts).Recently identified from an ad in the April 1, 1916 Automobile Trade Journal as the Presto Wrench used for wings nuts, etc., on old car Prest-O-Lites. Excellent.
(2.) H415 (Aultman Taylor) - - 7" Tee handle socket wrench. Good++, with weak markings. (R2-17)

PiCs Lots 51 thru 55

0056. AAP CO / T (Ayr American Plow Co., Ontario, Canada) - - 8.25". Pitted, painted. (R1-1, R2-1)

0057. Lot of 2 Caterpillar Wrenches
(1.) 3B5861 (Caterpillar) with Illinois Malleable Iron Co's "IM" logo - - 8" single open end. Good+. (not in Rathbone)
(2.) 1B1909 (with Armstrong's arm & hammer logo) (Caterpillar) - - 10" single open end with large 2-1/4" opening. Good++. (listed but no picture in Rathbone)

0058.Unmarked (orphan) - - 9.95" The "Wheel Wrench". Light pitting, painted. (odd ball page R1-504)

0059. Lot of 5
(1.) AH (orphan) - - 9" odd ball with dual hammer heads. First one seen. Good++.
(2.) WR (Ohio Cultivator - Bellevue, Ohio) - - 8.5" Farmer S-Wrench Style. Excellent. (R1-357)
(3.) C55 (orphan) - - 7.5". Pitted.
(4.) 481 (orphan) - - 9". Good+
(5.) Marked only "1" (orphan) - - 10.5" cast odd ball with an open end by a large hex box with a small open end on the end of the hex box. Good++.

PiCs Lots 56 thru 59

0060. E1015 (orphan) - - 9.75" by 10.25" L-shaped double socket wrench. Excellent.

0061. Y247 (Hart Grain Weigher Co - Peoria, Illinois) - - 13.5" double hook spanner wrench for threshing machine feeder. Good++. (R2-126)

0062. MILWAUKEE - - 15.25" large, thick hub type wrench. Also seen marked with part number 15395. Excellent. (R1-328)

0063. 883 (Massey-Harris and Case Plow Works) - - 14.5" Excellent. (R1-311)

0064. Lot of 4
(1.) UNSCREW (with arrow) (orphan) - - 7" odd face spanner wrench. (Excellent.)
(2.) Unmarked (orphan) - - 7" odd face spanner like above but without markings. Excellent
(3.) A164 (Minnesota Prison Industries - Stillwater, Minn.) - - 8". Medium pitting. (R1-329)
(4.) M55 (Stoddard Mfg. Co. - Dayton, Ohio) - - 8.5". Pitting, over cleaned. (R1-441)

0065. Lot of 2
(1.) 415 (orphan) - - 7.75" oddball (Good++ with a couple minor casting flaws)
(2.) Unmarked (orphan) 7.5" same wrench as above but without markings. Good++, minor jaw chip.

PiCs Lots 60 thru 65

0066. Lot of 2
(1.) 66W (Garden City Feeder Co. - Pella, Iowa) - - 9". Double square socket. Can be confused with the M99 IHC wrench when read upside down. Excellent. (R2-109)
(2.) 139 (Eagle Mfg. - Kansas City, MO and Dallas, TX) - - 9.75". Scarce wrench but severely pitted. (R3-73)

0067. 299 (Nichols & Sheppard, Battle Creek, Mich.) / "B" in a square logo)- - 9.5" double open end wrench. Good++ (R1-352)

0068. MUELLER / 51092 - - 11" dbl. hex box. Good++. (R1-343)

0069. GE500 (Aultman Taylor - Mansfield, Ohio) 6" by 13" Scarce tee handled socket wrench. Excellent. R3-11)

0070. Lot of 4
(1.) JS (orphan) - - 11.25" doe-s wrench. Good++. painted.
(2.) BW (Frost & Wood) - - 8.5". Good+, minor pitting. (R1-188)
(3.) S108 (orphan) - - 11.5". Pitted.
(4.) 8Z or Z8 - - 10.75" doe-s wrench. Good+.

PiCs Lots 66 thru 70

0071. SW (orphan) - - 10" by 12" tee socket wrench with ribbed shaft. Other similar tee socket wrenches have been seen marked CD, CW, FW, GW, KW and MW. Good++.

0072. MONTGOMERY WARD & CO 5/8 / 1/2 - - 10" silo wrench. Excellent, not cleaned. (R1-336)

0073. Indiana Silo Co Anderson Ind. / (marked same on both sides) - 12". double open end "S" wrench. Some poor markings on one side. (R1-249)

0074. CROWN SILO with a "CH" logo / CROWN LUMBER & SILO CO - OMAHA - - 12". Good++. (R1-119)

0075. VESPER WOOD MFG CO / VESPER WIS -10.5" double hex box. Good+ with light pitting. (R1-473)

0076. ECONOMY SILO (Economy Tank & Silo Co. - Fredrick, Maryland) / 1 - - 9.25". Good+. (R1-158)

0077. HARDER / X60 (Harder Mfg. Co. - Cobleskill, NY) - - 9.25". Pitted. (R1-216)

0078. SIMPLEX INC. 56 / MARSHFIELD WIS - - 8.5" silo type wrench. Good+, painted. (R1-426)

0079. A28 (orphan) - - 10.5". Farmer-S type with added part on edge with a large hang hole. Good++

PiCs Lots 71 thru 79

0080. V25 (Case Plow Works) - - 6.5". Very rare Case wrench. First we have had to list. Excellent. (R1-77)

0081. Lot of 2
(1.) Z147 / PITMAN WRENCH (orphan) - - 5.75". Excellent. (Rathbone shows as a Huber wrench but the parts list description for the Huber Z147 is a "union wrench" not a pitman wrench, see R21-134)
(2.) 169J (Advance Threshing Machine Co,, Battle, Mich. later Advance-Rumely) - - 7.75" Steam engine wrench. Light pitting. (R2-4)

0082. OWATONNA DOUBLE DISC (Owatonna, Minn.) - - 7.5". Excellent. (R1-365 )

0083. B319 (Moline Plow Co) - - 9.75" Sliding tee handle crowfoot wrench. Excellent (R1-332)

0084. Lot of 4
(1.) V106 (orphan) - - 8.5". Light pitting.
(2.) 1273 (orphan) - - 9". Excellent.
(3.) K530 (orphan)- - 7". Medium pitting.
(4.) B77 (orphan) - - 8". Excellent, jaw edges, modified on one end.

0085. C28 (David Bradley) - - 17.25". Excellent. (R1-126)

PiCs Lots 80 thru 85

0086. 1340 (Nichols & Sheppard, Battle Creek, Mich.) - - 12.75". Double open with flat sides variant. Medium pitting (R2-216)

0087. 1340 (Nichols & Sheppard, Battle Creek, Mich.) - - 13.5". Double open end with indented sides variant. Excellent. (R2-216)

0088. G. M. CO. 3/8 and 5/16 / PEERLESS (Geiser Mfg Co - Waynesboro, PA) - - 6.75" Good+. (R1-200)

0089. G. M. CO. 7/16 and 1/2 / PEERLESS (Geiser Mfg Co - Waynesboro, PA) - - 8.75" Good++. (R1-200)

0090. G. M. CO. 3/4 and 7/8 / PEERLESS (Geiser Mfg Co - Waynesboro, PA) - - 12.5" Good+. (R1-200)

0091. R & CO. (Robinson & Co, Richmond, Indiana) - 37 - - 11", Over the years we have had one Robinson 44 wrench to sell but not any No. 37's. Painted and light pitting. (R1-398)

0092. (Minneapolis Threshing Machine Co) - - 8.5" Steam engine wrench. Medium pitting. (R2-204)

0093. M71 (Massey-Harris) - - 9.75". Excellent. (R1-312)

0094. Lot of 2
(1.) S2362 (Massey-Harris) - - 9" cast handled socket wrench Good++. (R3-141)
(2.) 1185 (Massey-Harris / Johnston Harvester) - - 7.25". Good++. (R1-272, R1-311)

PiCs Lots 86 thru 94

0095. Unmarked - - 11.75" odd ball. Whitman & Barnes S-Wrench. Excellent. (R1-487, also Rathbone's Odd Ball page R1-504)

0096. Lot of 2
(1.) 4 & 5 HOIST 44-2 - - 14" large stepped open end. Good++. (not listed, no info found)
(2.) OCS 852415 with "OS" in a rectangle logo (orphan) - - 13" heavy single open ended wrench.

0097. 881C (Case T. M. Co.) - - 9.75" by 12.25" tee handled socket wrench for Case Steam Engines. Good ++ (R1-83)

0098. 3271 (Gear, Scott & Co. - Richmond, Ind. later M. Rumely) - - 16" double offset open ended threshing machine cylinder tooth wrench. Good++. (R2-107)

0099. Lot of 2
(1.) S702 - FOR WATER PUMP NUTS ONLY / MADE IN U.S.A. (Caterpillar) - - 10.5". Excellent. (R1-86)
(2.) 2-1/2 IN - IAMD - 36885B (orphan) - - 13" large open end (3-5/8" opening). Excellent.

PiCs Lots 95 thru 99

0100. Unmarked - - 5.75". Quick adjust bicycle with fine rack teeth and a tire tool end. Good++. (not listed, no info found)

0101. SPAULDING MACH. SCREW CO. - BUFFALO, NY - W. DICK'S PAT. NOV 21, 93 - - 5" center screw adjust bike wrench with screwdriver tip on end of shaft when wrench is adjusted completely open. Good++ with original plating. (S102) *PAT*

0102. ??ES FROST & COMPANY - CHICAGO - J. C. & CO. - DROP FORGED / DROP FORGED - - 5.75" center screw adjust with skeleton frame patented by John C. Speirs of Worcester, Mass. on 3-26-1895. First one seen with the Frost & Co. imprint. Good++ with original plating.(see S106, C284) *PAT*

0103. BILLINGS & SPENCER CO. - HARTFORD, CONN. - MADE FOR POPE MFG. CO. / C. E. BILLINGS PAT'D FEB. 18TH, 1879 (with ruler markings on shaft) - - 5" center screw adjust bicycle/pocket wrench with one side exposed variation. Good++ with plated finish. *PAT*

0104. THE ADJUSTABLE TWIN WRENCH PATENTED JAN. 5, 1915 - - 4" double ended bicycle or pocket wrench with nut and pipe heads. Smallest of two known sizes. Patented by John Anderson and John Elmer Anderson both from Portland, Conn. Good++. (S108) *PAT*

0105. THE LOVELL WRENCH CO. BRIDGEPORT, CONN. / PAT. APPL'D FOR - - 5.25" odd design double ender with normal style nut wrench on one end and an adjustable square box wrench on the other. Different turnbuckle type adjustment than the worm and double rack teeth type seen before. Canadian patent issued to Albert Kingman Lovell of New York, NY on Jul. 07, 1896. Good++ with most of the original plating, (see S815) *PAT* Also see Lovell's American patent issued May 12, 1896. *PAT*

0106. Marked only MADE IN GERMANY - - 5.25" bike/pocket wrench. Pull up on the adjusting knurl to disengage he rack teeth on the shaft. Good with some light pitting.

0107. AJAX /PAT. DEC. 31-05 - - 5.5" side adjust bike/pocket wrench. Same wrench and patent info as The Lavigne & Scott Feather Weight wrench. (see Lot No. 111 below).Good+ with some hammer damage on the edge. (not listed) *PAT*

PiCs Lots 100 thru 107

0108. CLEVELAND- CYCLES THE LOZIER MFG. CO. - TOLEDO, OHIO - PAT. APL'D FOR / WAKEFIELD CYCLE WRENCH - WORCESTER, MASS USA - - 5.5" side adjust, flat shaft variation. Excellent.

0109. SPALDING (in script) / SPRINGFIELD - DROP FORGING CO. - SPRINGFIELD, MASS. - - 5.5" side screw adjust bicycle/pocket wrench. The Spalding imprint is usually found on Wakefield Cycle Wrenches, first one seen on this Springfield wrench. Good++.

0110. ROYAL CYCLE WORKS - WOSRCESTER, MASSS. - J. C. & CO. - WORCESTER, MASS. / PAT'D SEPT. 8, 1891 - - 5" center screw adjust with open areas on both sides of the frame. Patented by Reinhard Torkelson of Hatfield, Mass. on 3-26-1895. first one seen with the Royal Cycle Works imprint. Good+. (see S106 and C284) *PAT*

0111. THE LAVIGNE & SCOTT MFG CO - NEW HAVEN, CONN. - PAT. DEC. 31 - 95 / (picture of a feather) WEIGHT - - 5.5" side adjust bike wrench. Patented by Joseph Lavigne of New Haven, Conn. Excellent. (not in Schultz, see C200) *PAT*

0112. Marked only: PAT. APL'D FOR (Tripp's patent) - - 5" combination bicycle or pocket tool with a simple lever and rack quick adjust nut wench, an alligator and bike nipple wrench, ruler and screwdriver. Patented by Ira Tripp of Aurora, Illinois. Advertised as "The Best" wrench by the Best Wrench Company of Chicago, ILL. Good+++, has a spot of very light pitting. (S807, C64) *PAT*

0113. U. S. VISE & PIPE WRENCH CO. - BORNSTEIN PAT. JULY 26, 1892 - CHICAGO, ILL. / WORLD EXPOSITION - CHICAGO - 1893 - - 5" all metal turn handle adjustable wrench AND bulbous handle. patented July 26, 1892 by Henry Bornstein of Boston, Mass. Note: there are several different marking variations of this wrench. Good+ with some unreadable markings as usually found/ (S1066). *PAT*

0114. IVER JOHNSON (Iver Johnson Arms & Cycle Co. of Fitchburg, Mass.) - MADE IN USA - - 6" side screw adjust bicycle wrench with tire tool end. Good+. (S99D2)

0115. Marked only: PAT. APLD. FOR - - 5.5" adjustable double ended bicycle/pocket wrench with nut and pipe heads with an unusual slide adjustment and locking nut. Good++. Only second one we have had to list. (S108B)

PiCs Lots 108 thru 115

0116. THE ALL RIGHT - PAT. FEBY, 28, '99 / C. T. GUILD MACHINE CO. OF NO ATTLEBORO, MASS. - - 4.25" quick adjust bicycle/pocket wrench. This is the rarer shorter version and first one I've seen with the Child Machine Co imprint. Patent was granted to Charles T. Guild of North Attleborough, Mass. Good++. (S102B) *PAT*

0117. WAKEFIELD POCKET WRENCH - WORCESTER, MASS USA / PAT APL'D FOR - - 4.5" side adjust with hollow handle. Patent was granted to John E. Wakefield of Worcester, Mass. on Sep. 04, 1900. Same patent applies to larger motorcycle wrenches marked "Indian Motocycle" or "Flying Merkel". Excellent with plated finish. (not listed)

0118. CHARLES E. HALL CO. - BUFFALO, NY USA ("H" in a shield logo - - 7" side adjust with cotter key tools on each end. This was Hall's No. 15 model. Good++. (S1098B)

0119. Unmarked - - 4.5". small quick adjust bike or pocket wrench with a sliding collar that catches on the shaft rack type teeth to lock the lower jaws. Excellent. (not listed, no info found)

0120. PREMIER 5 - POPE MFG. CO. - - 5.25" side adjust with indented handle shaft panels. We have had Premier wrenches before but marked "Premier 3", "Premier 6", and "Premier 7" and marked "A. C. MFG. CO." vs. "Pope". Good+. (not listed)

0121. PAT MAY 11, 1897 - - 6." hook spanner wrench with a screw adjustment used on bicycle crank bearings. Patented by Frederick Schrader of Bridgeport, Conn. who later patented an adjustable wrench with a spanner. Good++.(S121B) *PAT*

0122. W. BAXTER - PAT. DEC 1, 1868 / W W W (owner's ID?) - - 4" Baxter's "S" Model double ended wrench. Good++ with only partial markings. *PAT*

0123. THE B. & S. CO. HARTFORD, CONN. -PAT'D NOV. 14, 1905 - -6" curved handle Crescent type with the patented jaw lock feature. Patent was issued to William R. Tomlinson of Hartford, Conn. Excellent 6" example of a scare Billings &: wrench. First 6" size we have had to offer. *PAT*

0124. LAKE SUPERIOR WRENCH CO - SAULT STE MARIE, MICHIGAN - PATENTED USA OCT. 4-10 - CANADA JULY 12, 10 - - 6" self adjusting nut and pipe wrench. Patents granted to John Boulieu of Sault Ste. Marie, Mich. Good++. (S362) *PAT* and *PAT*

0125. STICKLE BACK ONEHANDER - 6" / CHROMAVAN - GERMANY - - 6" self adjust wrench, plain jaws variation. Excellent New Old Stock with original package marked: CHROM-VASNADIUM No. 17 - 6" - 3/16 - 3/8" and a picture of the wrench.

PiCs Lots 116 thru 125

0126. Lot of 4 Bicycle or Pocket Wrenches
(1.) PAT. NOV 13, '00 - MAR 11, 'O2 - - 7" with an extra long shaft. Probably a special order wrench marked only with Mossberg's wrench patents. Excellent.
(2.) BARNES TOOL CO. - NEW HAVEN, CONN./ PAT'D 1884 - IMP'D 1893 - - 4.75" side adjust bicycle wrench. If you screw the lower completely out of the hollow handle you will find a screwdriver on the end. Patents were issued to John Ryan of New York City. Good+ with some minor dings. *PAT* and *PAT*
(3.) BARNES (fancy script) - - 5.5" side adjust. Good+ with stronger markings than usually found.
(4.) PAT AUG 2, 1921 - MADE IN USA - - 5.75" center adjust bicycle wrench made by the Park Metalware Co. of Orchard Park, NY. and patented by John Zilliox also of Orchard Park. Good++. (S99D4) *PAT*

0127. Lot of 4 Bicycle or Pocket Wrenches
(1.) Unmarked - - 3.5" Billing type. Good++.
(2.) WAKEFIELD CYCLE WRENCH - WORCESTER, MASS. / PAT APL'D FOR - - 5.5". Good++. (S99D3)
(3.) "GIRDER" - JOS. LUCAS LTD - BIRMINGAN - TESTED - -4. 5" center screw adjust wrench with exposed shaft. Good+ with some nicks over the markings. (S100T, Gessin-pg 118)
(4.) A & M BUFFALO, N.Y. - - 5" center screw adjust with a hollow sleeve type handle. Good++. (S114)

PiCs Lots 126 and 127

0128. Lot of 3 unmarked pin wrenches including an usual type. 7.25" to 9.5". Top two are severely pitted.

0129. 32 (Wheel & Seeder Co., La Crosse, Wisconsin) - - 9" cast clevis pin with four wrench openings. round not tapered pin variation. Light pitting, indistinct markings (R1-485).

0130. Unmarked (orphan) - - 14" large showy odd ball clevis pin wrench with four opening. Some pitting.

0131. Lot of 4 odd ball wrenches (unmarked or with unreadable numbers) - - 8" to 8.5". Second from top is a Whitman & Barnes with a hammer head (R1-487). Bottom three are pitted.

PiCs Lots 128 thru 131

0132. Lot of 4 unmarked clevis pin wrenches - - 5.75" to 8.75". Good+ to Good++.

0133. 132 (orphan) - - 7". Unusual two opening clevis pin wrench. Good+, weak markings.

0134. Lot of 3 Clevis Pin Wrenches
(1.) Marked only 2 - - 5.75" single opening with threaded end. Good+.
(2.) D57 (Champion Potato Machinery Co. - Hammond, Ind.) - - 8.25" with single opening. Good+ with poor markings. (R3-43)
(3.) W89 - -6.24" with two openings. Excellent.

0135. Lot of 2 Clevis Pin Wrenches
(1.) 244 (George W. Brown - Galesburg, Illinois) - - 8.5" with two openings. Medium pitting. (R3-34)
(2.) S. P. CO. (maybe Southern Plow Co. - Columbus, Georgia & Dallas Texas) - - 5.5" with two openings and threaded end. Pitting.

PiCs Lots 132 thru 135

0136. P. BROWN - 15 / PAT NOV 4 90 (On clevis) and 15 on pin - - 7.5". Rare clevis and locking pin with two openings and a hammer head. Patent No. 430771 was issued to Perry Brown of Louisville, Kent. Excellent. *PAT*

0137. Unmarked - - 9" primitive wooden clevis. Excellent.

0138. Unmarked - - 8" clevis with an odd threaded two opening pin. Good+.

0139. E. P. WISE - LINCOLN NEBR - PAT PD NO. 5 - 6 - -6" patented clevis and pin. Patent No. 1675681 was issued on July 3, 1928 to Ernest Paul Wise of Lincoln, Nebr. Excellent. *PAT*

0140. Unmarked - - 6" clevis and locking pin advertised as a "Patent Steel Wagon Clevis with clip for square back doubletree". Excellent (patent not found)

0141. Unmarked - - 7.5" unusual style clevis with locking pin. Excellent.

PiCs Lots 136 thru 141

0142. CORMANY MFG. CO. - 53- CHICAGO, ILL / PATD OCT 22 - 94 - - 6.25" combination locking clevis and pin. Patent No. 528,009 was granted to August Morganfield of Ogden, Kansas. Made in at least two sizes. Excellent. *PAT*

0143. TX6 - -9" unusual double clevis with bolt pins. Excellent except for a casting stress crack.

0144. COOK 2 / PAT 3-1-04 - - 6" clevis and pin. Patent No. 753,366 was issued to Benjamin W. Cook of Ingersoll, Mich. on Mar. 1, 1904. Clevis looks more like Cook's patent No. 876,333 issued on Jan. 14, 1908. Excellent. *PAT* and *PAT*

0145. PAT FEB 23 - 21 / Link-Belt's (dog bone logo) - -7" patented clevis with an unusual threaded alligator wrench pin. Patent No. 1444824 was issued to William E. Ballard of Birmingham, Alabama on Feb. 23, 1921.Excellent. *PAT*

0146. Lot of 2
(1.) 297 - - 7.25" clevis. Excellent.
(2.) CC CO - 2A - PAT 5-10-19 - - 8" unusual double clevis with threaded pins. Design patent No. 53,408 was issued to Mathias Clemens of Sherburn, Minn. Clevis was produced by the Clemens Clevis Co. of Minneapolis, Minn. Excellent. *PAT*

0147. 2940 ? - - 6.5" clevis with threaded three opening wrench pin marked: "15"with Illinois Malleable "IM" logo, Good++.

PiCs Lots 142 thru 147

0148. PAT'D Mar. 15, 1904 (weak markings, other markings not readable) - - 10" wood handled quick adjust wrench with replaceable rack teeth. Patented by Lewis Ash and Hiram B. Stewart both from Hassel, MT. Usually found marked Tacoma, Wash. and with two patent dates. Rarer wood handled version. Good+ with dings and hammer damage. (S543, C342) *PAT*

0149. Unmarked (Alexander & Purlington, Nashua, NH) - - 10" wood handled screw adjust nut wrench with a threaded rod along the back side of the shaft. According to Cope company was in business from 1853-1856). Rare wrench not listed and first one we have had to sell. Good++ with minor dings, former owner's stamped ID "W. George" in very small letters. (identified from another auction listing, no patent or other info found except a company listing in Cope page 5)

0150. COMO WRENCH CO. ROCKFORD, ILL. - PAT'D OCT. 14-13 / DROP FORGED - - 12" unique screw adjust pipe wrench consisting of only three parts with a slotted threaded upper jaw that slides over the wrench handle. Have seen some marked Chicago instead of Rockford. Patented by Joseph Anthony Schlehr of Chicago on Oct. 14, 1913. Good++,with stamped former owner's initials. (S589) *PAT*

0151. Marked only "S" - - 8.5" wooden handle coach type wrench with nut and pipe jaws. Good+, minor dings.

0152. Lot of 2
(1.) R-500-G - REECHET (sic) - PAT. 2594669 - - 10.75" - 1/3" drive turn the handle to ratchet wrench. Patented by Calvert D. Marshall of Georgetown, KY on April 29, 1952. Plated finish. Excellent. *PAT*
(2.) AC - PAT 2594669 - - 10 " 3/8" drive ratchet like Reechet above. Sold as part of an AC Spark Plug Tool Kit. Excellent with plated finish.

0153. BUR - TOOLS - GAN in a diamond logo - TRADEMARK - PAT. AP'LD FOR (Burgan Tools - Chicago, ILL.) - - 11.78" unusual ratchet wrench with a plier like adjustment. First one seen. Good+.

0154. Lot of 2
(1.) PAT PEND. - MODEL 10 - REINHARD McCABE CO. - MINNEAPOLIS, MINN - - 10" quick adjust pliers type wrench. Good++. (S713, patent not found)
(2.) THE BILLINGS & SPENCER COMPANY - - 7.75" auto type adjustable wrench with angled jaws. good+ with weak markings.

PiCs Lots 148 thru 154

0155. Unmarked - - 7" worm and rack type screw adjust nut wrench. Good++. (not listed, no info found)

0156. BELL WRENCH CO TULSA OKLA / PAT APRIL 25, 1905 OTHER PAT PENDG - - 9.5" quick adjust pipe wrench with rack teeth and a spring assisted release lever on lower jaw. Patented by Franklin of Sarcoxie, Missouri. on April 25, 1905 and on July 6, 1920 by William Bell of Tulsa, OK. One of a few wrenches from the Sooner state. Rare wrench, Good++ (C60) *PAT* and *PAT*

0157. PAT FEB 28, 90 - - 8" all metal quick adjust like the Bay State quick adjust wrench but without a spring on the release lever. Actual patent date is Feb. 18. 1896 issued to Lewis Petty Davidson of Denver, CO. Mfg by J. H. Shepard & Co. of Denver, Colo. Good+ with some hammer damage. (C278) *PAT*

0158. MEIER WRENCH - PAT SEPT. 10, 89 - - 11" quick adjust nut wrench with unique lever and rack teeth. Patented was granted to John B. Meier of Port Huron, Mich. Only third one we have had to list and they were 8" long. Good++. (not listed)

0159. PAT'D AUG. 6, '78 (Hill's patent) - - 9.5" all malleable cast screw adjust nut wrench. Patented by Henry Hill of Moline, Illinois (patent No. 206,733) and made by the Moline Malleable Iron Co. of Moline, IL. Also found in a smaller 7" size. Excellent. (S958, C166) *PAT*

0160. PAT'D JUNE 76 / ??????E MFG. CO. - - 11.25". McCormick's patent screw adjust malleable nut wrench with hammer face. Patent was granted to Robert Hall McCormick and William R. Baker both of Chicago, Illinois on Jul. 27, 1875 and reissued on Jun. 13, 1876. Excellent. (see S963) Good++. *PAT*

0161. ECLIPSE - 2 - PAT JULY 24, 1900 / H. W, & M. CO. (Hilts Wrench & Machine Mfg. Co.) RICHFORD, NY - - 10.25" quick adjust rack type pipe wrench with a button release (also seen with a lever instead of a button release). Patented by Charles O. Woods of Owego, NY. Good+ with some light pitting, no finish. (S667) *PAT*

0162. WALCO HEX WRENCH- NO. 1 - WALCO HEX TRADEMARK (with a hex logo) / WALWORTH MFG. CO. - BOSTON USA - PAT. APPLIED FOR - - 13" Stillson type wrench with jaws for hex nuts and bolts. Excellent. (S103)

0163. PATENT APPL'D FOR - - 9" by 9" cross type four way automobile lug type wrench. Made by the Nor-Air Auto Pump Co. Aurora, ILL (info from a 1922 ad). Excellent.

PiCs Lots 155 thru 163

0164. T11 - HASSLER (with two spoked wheel logos) (same markings both sides) - - 10" double hex box ends. Hassler's main products were Ford after market shock absorbers. Good+, some edge dings.

0165. T10 - HASSLER (with two spoked wheel logos) (same markings both sides) - - 8" double hex box ends. Rare small size. Excellent.

0166. K-11 - PAT. NOV 13, '00 - MAR 11, 'O2 - MANF'D BY FRANK MOSSBERG CO. - ATTLEBORO, MASS. (with two Mossberg logos) - - 10.75" auto type wrench. One of the harder to find Mossberg wrenches of this type. Good+.

0167. BAIR TOP HOLDER / AUTO SPEC. MFG. CO. ST. JOSEPH, MICH - - 6" cast hex box with blade on end. For use on Bair Automotive tops

0168. The BILLINGS & SPENCER CO. - B - PIERCE (with arrow logo) - - 5" adjustable nut wrench with ruler markings on the shaft. Excellent.

0169. WESTON MOTT CO. - - 8" cast double hex box. First one we have had to list. Excellent, painted, may be original.

0170. SCHRADER UNIVERSAL PRODUCTS- REG. U. S. PAT. OFF. - A. SCHRADER'AS SON, Etc. with picture of a tire air chuck and valve stem cover. - - 3" star shaped wrench with two sizes of sockets. 1920 ad seen for the Schrader Universal Star Wrench No. 3074. for tire valves nuts. Good++. (patent not found)

0171. "FLYING MERKEL" - MANUFACTURED BY - THE MIAMI CYCLE & MFG CO. - MIDDLETOWN, OHIO / - WAKEFIELD WRENCH - WORCESTER, MASS. USA - - 6.25". Good+ with some minor dings.

0172. "INDIAN" - - 5.75" flat steel double open end wrench. Good with areas of light pitting.

0173. Lot of 2 Automobile Wire Wheel Spoke Wrenches
(1.) BUDD WHEEL / 3103 (with diamond logo) - - 5.25" cast single open end. Excellent.
(2.) HOUK - - 5.25" flat steel soe. Excellent.

0174. ECLIPSE SPRING LUBRICATOR / ST. LOUIS MO. - PAT. PEND. - - 8.5" single hex box end wrench. Excellent. (R3-75)

0175. Unmarked - - 6" spring leaf spreader for greasing automobile leaf springs. Excellent.

0176. Marked only with William's "W" in a diamond logo - - 5.5" leaf spring spreader for greasing leaf springs. Patented June 8, 1915 by John H. Stevenson and Frederick Knowlson of Ann Arbor, Michigan. Listed as the Knowlson No. 1 Spring Spreader made by the Spring Leaf Lubricator Co. of Ann Arbor, Mich. in a 1920 ad. Fair with some pitting. *PAT*

0177. DAYTON 2904 / SPRING LEAF SEPARATOR - - 7.5"cast "C" clamp type spring leaf spreader for greasing automobile leaf springs. Good++.

PiCs Lots 164 thru 177

0178. NASH AW-495 CASTER ANGLE GAGE - - 12" early cast wheel alignment tool. Excellent, like new.

0179. Winton 21-806 - (Winton Motor Carriage Co. - Cleveland, Ohio) - - 15"" Winton automobile wrench. Rare wench, first one we have listed. Excellent.

0180. PUMP HANDLE VALVE GRINDER / PATENTED APRIL 6. 1915 - - 15" unusual cast valve grinder. Name on the grinder provides a good description. Patent issued to George K Carlson (a subject of the Emperor of Russia, residing at New York") Excellent *PAT*

0181. Unmarked (BRAKE PEDAL JACK) - - 15" jack tool with handle. Identified from an ad as a "BP-1 Blue-Point Brake Pedal Jack. First one I have seen. Some light pitting.

0182. Unmarked - - 14.5" crank type valve lapper / grinder with brass body. Excellent.

0183. Unmarked - - 14" crank type valve lapper / grinder. Good++.

PiCs Lots 178 thru 183

0184. MASTER ADAPT0R CO. - DES MOINES IA - PAT. PEND - GENERAL MACH. & MFG. CO. - DES MOINES, IA - - 8". Some kind of special purpose greaser? A complicated gizmo.

0185. Unmarked - - 10.5" speed wrench type valve lapper / grinder with a tool that fits six different valve slots.

0186. Unmarked - - 11" valve lapper / grinder with wooden knob. Good++.

0187. IMPERIAL / RACINE WIS. -- 11.5" cast valve lapper / grinder in excellent condition.

0188. O. F. SMITH CO. = MOLINE ILL. - - 13.5" valve lapper / grinder with wooden handle. Good++.

0189. ZERK AUTOMATIC -PAT. PEND. - MADE BY - THE ALLYNE-ZERK CO. - CLEVELAND, O. / USE HEAV Y CYLINDER OIL - - 11" strangest grease gun I have seen. Oscar Ulysses Zerk patented the grease zerk still used today. He also had over 300 other patents. Good++.

PiCs Lots 184 thru 189

0190. M104 (Detroit American?) - - 8" doe with one end offset 90 degrees. (R4-202). Good+ with light pitting.

0191. BEMENT & SONS / J183 - - 10" Good++. (R1-49)

0192. REEVES / 3380 (later later Emerson-Brantingham)- - 6". Good++. (R2-245)

0193. BELANGER MONTMAGNY (Quebec, Canada) - 45 (with diamond logo) - - 9.5". Good++. (R1-45)

0194. REEVES (with a "W" in a circle logo) / 1578 - - 6.5" Steam engine wrench. Good+. (R1-393)

0195. Black Hawk / M167 (SD. M. Sechler Carriage & Imp. Co. - Moline, Illinois) - - 10". Excellent. (R1-419)

0196. Reeves / 3379R (Reeves & Co. - Columbus, Indiana, later Emerson-Brantingham) - - 7.25". There is also a 3379 Reeves wrench. Good++. (R1-393)

0197. MASTER (orphan) - - 7.25" tee handled socket wrench. Good+ with light pitting.

0198. MODEL / 1223 (C. S. Bell Co. - Hillsboro, Ohio) - - 6". Good++ with usual weak markings. (R1-48)

0199. SAMPLE STEEL - WAEHOUSEING DIV. - - 7.5" BY 3/4" thick . Real odd ball. (no info found)

0200. W. P. CO. - 71 (Wiard Plow Co. Batavia, NY) - - 9.5". Three wrench openings variation. Good+.

0201. Framed Display of Rare Barb Wire Fence Tools, Wire Splices and Barb Wire Patented by Jacob & Warren M. Brinkerhoff of Auburn, NY- - 14" by 29". Including:
(1.) Ribbon wire stretcher with cast head and original wooden handle. - -18" Patented Mar. 2. 1880 (No. 224992). Good+. (Smith 380) *PAT* - *PAT*
(2.) Rare wire twister patented. June 24. 1879 (No. 216779) - - 9" Good++. (Smith 699) *PAT* - *PAT*
(3.) Wire fence hook or nail (Brinkerhoff's patents) - - Patents issued June 24, 1879 (No. 216,778 and Dec 5, 1882 (No. 268613). *PAT* - *PAT*
(4.) Three Brinkerhoff wire splices and several samples of ribbon wire.

PiCs Lot 201

0202. PAGE 641 / PAGE 641 - - 26" cast iron Lever type wire fence stretcher made by the Page Fencing Co. of Adrian, Mich. Excellent. (Smith 308)

0203. PATD MAY 16, 1882 by A. PALM LAWRENCE, KAS - -19.5" cast barb wire spool carrier. Patented by Andrew Palm (No. 25903 and assigned to the Lawrence Plow Co. Excellent. (Smith 795) *PAT*

0204. PATD NOV. 6, 83 / CHALLENGE- -22.5" cast ratchet type fence wire stretcher. Patented by Alexander. C. Decker of Bushnell, Illinois. Good++, as found, not cleaned. (Smith 259) *PAT*

0205. 207 / 208 - - 18.5" cast barb wire spool carrier. Excellent. (Smith 787)

0206. AMERICAN STEEL & WIRE CO. - AS12 / AS13 PAT APPLD FOR - -33" large, heavy cast lever type wire fence stretcher. Patented April 28, 1908 by Arthur W. Sprague of La Grange, Illinois. Excellent. (Smith 301?) *PAT*

0207. CHURCH BROS / CHURCH BROS.- ADRIAN MICH - 39 (with "H" in a diamond logo) - - 15" malleable combination fencing tool with an open ended wrench. Good++, painted. (Smith 97)

PiCs Lots 202 - 207

0208. Unmarked - - 24" malleable cast combination fence stretcher, hammer and staple puller. Listed in Smith's book as an "Eclipse Lever Stretcher". Good++. (Smith 297 or 298)

0209. Unmarked (Slater's patent) - - 30" round bar fence stretcher. Patented Dec 23, 1884 (No. 309577) by Frank Slater of Guthrie, Center, Iowa. Good++. (Smith 494) *PAT*

0210. DURBIN-DURCO INC. - ST. LOUIS, MO / WIRE STRETCHER 501 - - 20" cast lever stretcher and staple puller. Good++ as found, not cleaned. (like Smith 326)

0211. S4 / S5 - - 19" cast malleable iron lever type fence stretcher. Good++. (Smith 376)

0212. PAT'D JAN 2, 1900 - MAY 14, 1900 SETLTER (on one handle) / PAT'D JAN 2, 1900 -MAY 14, 1901 - STETLER ' F-1" - - 17.5" cast fence stretcher, wire cutter and nail claw. Patented by Daniel Stetler of Medford , Oklahoma Territory. Good++. (Smith No. 127) *PAT*

0213. O F SMITH CO - DECKER - ILL -PATD - 11R / BARB WIRE STRETCHER - 11L - - 9" . Patented Aug. 13, 1904. Excellent, not the same crank handle shown in Smith's book. (Smith 237)

- PiCs Lots 208 - 213

0214. WHITESEL MFG. CO. OMAHA NEBR. / PAT'D ??? 7, 1915 (patent dates markings are very faint) - - 27" heavy complicated cast malleable iron wire fence stretcher. Patent was granted to Newton and Fredrick Whitesel of Watertown, Nebraska on Sept. 15, 1915. Excellent. (similar to Smith 295) *PAT*

0215. D-7 - D10/ D-8 (with a "-D" in a circle logo) (American Wire Fence Co. Stretcher)- - 18". Excellent. (Smith No. 356)

0216. AMERICAN - STEEL & WIRE CO. -PAT APPLD FOR - S1 (with "CHl" logo) / A S - -28.5" cast lever type wire fence stretcher. Patented April 28, 1908 by Arthur W. Sprague of La Grange, Illinois. Excellent. (Smith 303). Good++, loop type handle end has been squeezed together. *PAT*

0217. Lot of 3 Unmarked (Universal Fence Co.) - - 36" wire fence stretcher or slack taker with wood handle and metal attachments. Excellent. New Old Stock, Looks like it just came off the hardware store shelf. (Smith 439 or Smith 440). Plus two handles with no attachments. Good++.

PiCs Lots 214 - 217

0218. O-M-F TRADEMARK (on stand) "Z", "96", "92" and '93" (on lasts) - - Four cobbler's shoe lasts and lap or bench mount stand. Excellent.

PiCs Lot 218

0219. Pat. JAN. 15, 95 - - 30" cast wire fence stretcher. Good++. (Smith 429)

0220. Lot of Five Fencing Tools
(1.) ??ECO 850 Z - - 6" grip type wire stretcher. Patented Aug. 30, 1881 by Martin A. Howe, Jr. of Chicago, Illinois. Excellent. (Smith 779) *PAT*
(2.) Unmarked - - 7" wire splicing tool. Similar but different than those shown on smith page 95. Excellent.
(3.) 25A DURBIN DURCO INC.- ST. LOUIS 5 MO / 25B - 25C- - 5.5" wire grip. Excellent. (Smith 753)
(4.) 4545 / 3 - - 4.5" cast wire grip. Excellent. (Similar to Smith 752 )
(5.) Unmarked - - 4" steel wire grip. Good+. (not in Smith's book)

0221. BARBOUR PEERLESS 3 - - 30" massive pipe wrench made by Barbour Brothers of Tarentum, Penn. and patented by Alfred Barbour on Nov. 11, 1884. Advertised to grip, round, square, oval, octagon, hexagon and all other shapes. First one we have had to list. Excellent with weak marking markings. (C54) *PAT*

0222. 138M (Minneapolis Threshing Machine Co) - - 22" Rare steam engine wrench. Good++. (R3-154)

0223. ADRIANCE RC13 (Adriance, Platt & CO., Poughkeepsie, NY, later Moline Plow Co.) - - 13.5" cast foot pedal for a dump rake with the 16.5" attached lever. Excellent with large bold markings.

0224. 176 (Avery Co.) - - 20" threshing machine cylinder tooth wrench. Excellent. (R2-18)

PiCs Lots 219 - 224

0225. SUNSET EQUP. CO. / ST. PAUL MINN. - 1-1/2 - - 10.75". Aluminum dairy wrench with 2-1/5" openings. Excellent.

0226. L. C. THOMSEN 25HK 3-1/2 X 3 / KENOSHA WI 25H 3-1/2 X 3 - - 21.25" Extra large aluminum dairy wrench with 4-1/8" and 4-7/8" openings. Excellent.

0227. Lot of 2 Aluminum Dairy Wrenches
(1.) G. & H. PRODUCTS CORP 25H 1-1/2 / KENOSHA WISCONSIN 25H 1-1/2 - - 12.5" with 2-1/2" opening. Excellent.
(2.) G. & H. PRODUCTS CORP 25H 2 / KENOSHA WISCONSIN 25H 2 - - 14.5" with 3" opening. Excellent.

0228. H. C. DUKE AND SON / EAST MOLINE ILL - - 10.75" aluminum dairy wrench with 1-3/4" opening. First wrench I have seen from this company. Hammer damage on edges.

0229. 1-1/2 - WALKER - 2 ("NA" in a hex logo) - - 12" aluminum double open end wrench with 2-1/2" and 3" openings. Good++.

PiCs Lots 225 thru 229

0230. Y7155 (Deere) - - 34" stake for Deere check row planter wire.

0231. 1683 (Huber Mfg. Co. - Marion, Ohio) - - 27.5" cast threshing machine cylinder tooth wrench. Excellent with blurry markings. (R2-134)

0232. Unmarked (John Deere AE25728) - - 27" Long Torque Wrench for Deere Model 35 and 38 Harvesters. Excellent with original green paint. (DC-213)

0233. PAT. NO. 1318176 PAT. OCT. 7 1919 NO. 1 - - 32" threshing machine cylinder tooth wrench with a flexible joint socket. Patented by Michael Quint and Peter Miller Quint of Hays, Kans. Good+, some pitting. *PAT*

0234. MB82364 with IH logo - - 30" International combine cylinder wrench. Excellent with original red paint.

PiCs Lots 230 thru 234

0235. Unmarked - - 19.5" self adjust pipe wrench. Excellent with most of the original finish.

0236. TIGER - PAT. MAR. 8, 1904 - - 17" threshing machine cylinder tooth ratchet wrench with tee handle and one hex socket. Patent granted to William R. Johnson of Freeport, Illinois. Good+ with poor markings. (S45, R1-455) *PAT*

0237. 2 IN THROTTLE WRENCH 366F (Advance Thresher Co. - Battle Creek, Mich. later Advance-Rumely) - - 17.5" steam engine wrench. Good+, blurry markings, 1" pipe extension has some dents. (R3-2)

0238. JOHN DEERE - MOLINE, ILL. U.S.A. / M787A - JD logo - -17.5" large cast plow "bowtie" turnbuckle. Excellent with large bold markings.

PiCs Lots 235 thru 238

0239. PATD' NOV. 27, 1900 (Foote's patent) - - 22.5" combination adjustable buggy wrench, jack and wheel holder. Patented by James. B. Foote of Fredericktown, Ohio as an improvement on his earlier Nov. 2, 1897 patent (see lot 241). Patent shows an oil reservoir inside the upper shaft which was not included or is missing on this example. Ad shown in Rathbone's book shows the J. B. Foote Foundry Co. of Fredericktown, Ohio as the manufactures. As found uncleaned condition with some areas with pitting and some with the original black Japan finish. (S238, R1-111) *PAT*

0240. Unmarked (Mitchell's Patent) - - 12" turn handle to adjust buggy wrench. Patented May 22, 1877 by Joseph P. Mitchell of Bedford, Mass. Excellent except for a few dings on the shaft. (S211)

0241. COMBINATION WRENCH & JACK / SALEM OHIO - PAT'D NOV 2, 97 (Foote's patent) - - 22" combination adjustable buggy wrench, jack and wheel holder. Patented by James. B. Foote of Fredericktown, Ohio. The thumbscrew adjusting bolt is broken off. (S238, R1-111) *PAT*

0242. PAT'D. NOV. 2, 80 (Thompson's patent) - - 11.75" wood handled adjustable buggy wench, single head variation. Patented by H. A. Thompson of Farmington, Maine. Good+ with former owners name ("Ames") carved on handle. (S204) *PAT*

0243. Unmarked wagon tire bolt wench (Byrne's patent) - - 11.75". Patented by John Byrne of Sharon, Wisc. March 13, 1888 and advertised by Byrne & Ziegaus of Sharon, Wisc. as the O.K. Wagon Tire Bolt Wrench . Also listed in early Stanley Tool Catalogs. Excellent except adjusting bolt is a replacement. (S1065) *PAT*

PiCs Lots 239 thru 243

0244. MCCORMICK (IHC) - - 10" wood handled monkey wrench with coarse ridged adjusting bolt knob. . No W & B logo variant. Good++.

0245. RUMELY / W & B CO. - MADE IN CANADA (in a Whitman's & Barnes diamond logo) - - 11.25" wooden handled monkey wrench with very rare Rumely imprint. Don't think I have seen this marking on a made in Canada Whitman & Barnes wrench. Good+.

0246. W. A. W. M & R. M. CO. - HOOSICK FALLS (Walter A. Wood Mowing & Reaping Machine Co. - Hoosick Falls, new York) - - 10" wood handled monkey wrench. Good+. (R2-300)

0247. G. MONSON / G. MONSON - -10" wooden handled monkey wrench with coarse ridge adjusting knob. Good+ with some dents and hammer damage.

0248. JOHNSTON - HARVESTER CO (later Massey Harris) - - 8.5" wood handled monkey wrench. Some light pitting and hammer damage. (R1-272)

0249. CHAMPION - W & B CO. (inside a diamond logo) - (Champion Mower & Reaper Co. / IHC) - - 8.5" monkey wrench with stubby wooden handle and coarse ribbed adjusting bolt knob. Not on the latest IHC Tool List. Good+ with some hammer damage on jaw.

0250. <M-H> (Massey-Harris) - - 8.25" all metal Vandegrift monkey wrench. Scarce variation, usually found just marked with Massey Harris' part number 123C. Good+. (R1-312)

0251. ADRIANCE (Adriance, Platt & CO., Poughkeepsie, NY later Moline Plow Co.) - - 9.75" wood handled monkey wrench. Good with hammer damage to jaw. (R1-54)

0252. DEERING (in a shield logo) (IHC No. 7694TM) - - 10" wood handled monkey wrench. Some hammer damage on jaw, minor dents and nicks.

PiCs Lots 244 thru 252

0253. SAFETY / PAT FEB 1, '98 - - 14.25". Scarce Joy Wagon Wrench variant with the "Safety" marking. Patented by Aden Joy of New Market, NH. Excellent. (S221) *PAT*

0254. PAT'D. NOV. 2, 1880 (Thompson's patent) - - 14.5" wood handled adjustable buggy wench. Two head variation. Patented by H. A. Thompson of Farmington, Maine. Excellent. (S204) *PAT*

0255. PAT. NOV. 2, 80 (Thompson's patent) - - 12" wood handled adjustable buggy wench. Two head variation. Patented by H. A. Thompson of Farmington, Maine. Good++. with a handle chip. (S204) *PAT*

0256. INTERNATIONAL MFG CO - PATENT PENDING / 1408 WABASH AVE CHICAGO - 2 - - 14" heavy cast screw adjust wagon wrench with a lever lightener and a wooden spinner. Patented by Ernil Klemm of Chicago on Dec, 12. 1905 (Pat. No. 806815). Excellent except for minor wooden knob chip. (S222) *PAT*

0257. PAT. AUG. 25, 1896 (Klopp's patent) - - 8" wagon tire bolt wrench. Patent was granted to John Klopp of Hopkins, Minn. First one seen . DATAMP lists as "Not known to have been produced". Excellent, wooden crank handle knob is missing, *PAT*

0258. PAT'D AUT. 21, 83 (Brandt's patent) - - 11.5" rare wagon tire bolt wench. Patent was granted to John J. Brandt of De Witt Centre, NY. first one we have had to list, only one known? Excellent. *PAT*

PiCs Lots 253 thru 258

0259. LIGHTNING - WILLEY & RUSSELL MFG. CO. - GREENFIELD, MAS. - - 6" brace attachment for wagon wheel tire rim bolts. Patented March 2, 1869 by Darius Wilcox of Ansonia, Conn and marketed as the "Green River Patent Rim Wrench". Enclosed gear variation. Excellent. (S225, C335) *PAT*

0260. WILLEY & RUSSELL - GREENFIELD, MASS. - - 3' by 3" 4-way cross type socket wrench. Advertised as a "Cross Rim Wrench" for wheel ire rim bolts. Excellent.

0261. PAT. SEPT. 21, 86 "2" (Getman's patent)- - 7.5" buggy wrench with a spring loaded nut holder with lever. Advertised as "The Universal Carriage Wrench" by the Phillips-Getman Co of Ilion, NY. Patented by Henry Getman of Ilion Sept. 21, 1886. Good++. (S228, R1-201) *PAT*

0262. Lot of 2
(1.) S92 (orphan) - - 8.5" odd buggy wrench type with three openings and an extended square socket on one end and a notch on the other end. Excellent.
(2.)P55 (orphan) - - 8.5" buggy type with the same kind of odd notch on one end. Excellent.

0263. SEARL'S MFG CO MAKE THE BEST PROP NUTS - - 9" special purpose wrench for buggy top prop fasteners which were patented on Feb.17, 1891 by Anson Searls of Newark, NJ. Excellent, like new with the original Japan finish. *PAT*

0264. Unmarked - - 7.25" combination hammer, hoof pick and three opening wrench. Light pitting.

0265. Unmarked - - 9.25" combination snow knocker hammer, hoof pick and three buggy wrench type openings. Good++.

0266. STEEL - - 8.5" combination snow knocker hammer, hoof prick, alligator wrench and a screwdriver. Excellent. (Hammer book-page 97)

0267. Unmarked - - 9.5" combination snow knocker hammer, hoof pick, screwdriver and six wrench openings. Medium pitting.

0268. Unmarked - - 11.75" odd ball. Excellent. Neat looking wrench. (R1-504 odd ball page)

0269. Unmarked - - 9" combination wrench with five wrench openings and a nail claw sold by several hardware companies as seen in a Belknap Hardware Co. catalog listing. Good++.

0270. Lot of 2 odd ball wrenches - - 9.5" and 10". Top one is unmarked, bottom one has very faint markings 322?. Both are in excellent condition.

PiCs Lots 259 thru 270

0271. Lot of 5 Buggy Wenches
(1.) Unmarked - -11.75" with large 2-1/2" hex opening. Excellent.
(2.) Unmarked - -11.5" with large 2-1/8" hex opening. Excellent.
(3.) 4025E - - 8.5" double hex box. Excellent.
(4.) 1098 / D - - 10" with 1-1/4" square opening. Excellent.
(5.) 2320C - X (Eberhard's "E" in a circle logo) / PAT'D - - 9.5". Excellent

0272. Lot of 5 Numbered Buggy Wrenches. All in Good++ condition.
(1.) F14 (orphan) - - 7"
(2.) 2811C - - 6.25"
(3.) F104 (orphan) - - 7.75".
(4.) 2819B 7/8 / "D" in a diamond logo - - 9".
(5.) 2819F 1-3/8 / "D" in a diamond logo - - 11".

0273. Lot of 5 Buggy Wrenches
(1.) Unmarked - - 11.5" with a 1-7/8" thin square opening. Good+.
(2.) Unmarked - - 11" with a 1-1/4" thin square opening. Excellent.
(3.) Unmarked - - 10-3/4"" with a 1-1/8" thin square opening. Good+.
(4.) 2320? - - 12" Eberhard type buggy wrench with a 2" square opening. Good+.
(5.) 7320H (Eberhard's "E" in a circle logo) / PAT'D - - 11" buggy wrench with a large 1-7/8" square opening. Good+

PiCs Lots 271 thru 273

0274. Lot of 5 Odd Buggy and Wagon Wrenches
(1.) 7325G - 1-1/2 (with Eberhard's "E" in a circle logo) - - 10.75". Good++.
(2.) BLE??? (weak markings, can't read all of them) - - 11.25". Light pitting.
(3.) 340 (orphan) - - 9.75". Excellent.
(4.) Unmarked - -12.75". Thin, flat type. Excellent.
(5.) Marked only with an "A' in a square logo - - 11,5". Excellent.

0275. Lot of 5 Different Buggy and Wagon Wrenches
(1.) Unmarked - -11.75". Odd Ball. Pitted.
(2.) 141 (orphan) - - 10". Pitted.
(3.) 7325H (with Eberhard's "E" in a circle logo) - - 19.25" with a large hex box end. Excellent.
(4.) Unmarked - - 11". Pitting.
(5.) Marked only with an "A" - - 11.25". Pitting.

PiCs Lots 274 and 275

0276. HENNEY (Henney Buggy Co, - Freeport, Illinois) - - 7.5" buggy wrench. Good+. (R1-229)

0277. MILLER'S VEHICLE WRENCH / PATD JAN 27 91 - 1 - - 8.75". Patented by John A. Miller of St. Louis, Missouri. Good++. (R1-327) *PAT*

0278. DAYTON / PATENTED (with Dayton's "D" in a circle logo) - - 8.5" scarce large Dayton buggy wrench with 1-1/8" square opening. Excellent. (similar to R3-61)

0279. HARPER / PAT AP'D FOR (Harper Buggy Co. - Columbia City, Indiana) - - 8" buggy wrench with a spring type nut holder (1-1/8" size). Excellent. (R1-218)

0280. FRAZIER (W. S. Fraizer & Co. - Aurora, ILL.) - - 6.75" Double box end buggy wrench. Good+. (R1-183)

0281. PARRY / 34C (Parry Mfg. Co. - Indianapolis, Ind.) - - 5.25". Rare buggy wrench, Parry wrench usually seen is a combination wench and buggy whip holder. Excellent. (not in Rathbone but in a buggy wrench group picture in Schulz's book S-240)

0282. TIGER - - 7.5" Buggy wrench. Pitted. (R1-455, R2-276)

0283. FREEPORT (Moline Plow Co. - Moline, Illinois) / D - - 7.75" buggy wrench, center square by two box ends variation. Good. (R1-184)

0284. COOK - PATD SEPT 1, 85 / 1-1/4 - - 9.25" buggy wrench with a nut holder. 1-1/4" size. Patented by Roswell Cook of Ilion, NY. Excellent with original Japanned finish. (S240, R1-112) *PAT*

0285. COOK - PATD SEPT 1, 85 / 1-1/8 - - 9" buggy wrench with a nut holder. 1-1/8" size. Patented by Roswell Cook of Ilion, NY. Excellent with original Japanned finish. (S240, R1-112) *PAT*

0286. MOYER / 224 (H. A. Moyer - Syracuse, New York) - - 8" Buggy Wrench. Excellent with most of the original japanned finish. (R1-342)

0287. H. H. BABCOCK CO.- 28 (Watertown, NY) - - 9.25" buggy wrench. Good++. (R1-36)

PiCs Lots 276 thru 287

0288. Lot of 3 Plumb Open End Wrenches with Pebble Finish (as found, not cleaned)
(1.) 3055 - 1-1/4 - 1-5/16 - - 14".
(2.) 3050 - 1-1/16 - 1-1.8 - - 12.5".
(3.) 3039 - 3/4 - 7/8 - - 9".

0289. Unmarked - -7.5" combination slip joint pliers, screwdriver and Crescent type wench. Excellent.

0290. ARTISAN (a Gambles store brand) / MADE IN USA - - 6.25" combination slip joint pliers, screwdriver and 4" size Crescent type wrench. I have never seen this tool marked "ARTISAN" before. Good++.

0291. Lot of 2
(1.) C. S. OSBORNE & CO. - Newark, NJ - MADE IN USA - - 4" specialty tool, probably for leather working? Good++ with , most of the original plating.
(2.) USMC / USMC (United Shoe Machine Co.) - - 7.75" nippers. Good++.

0292. Lot of 2
(1.) Unmarked - - 10.5" special purpose cast plier type combination tool. 10.5". Others seen marked "L. D. B. CO. PHILA " ( L. D. Berger Bros. Co. - Philadelphia, Penn.) Advertised as a tool to clinch roof gutter hangers and other uses in the roofing trade. Excellent. (not listed)
(2.) Unmarked - - 10.5" automatic wire twisting pliers with wire cutter. Excellent.

PiCs Lots 288 thru 292

0293. PERPETUAL GRIP - ALL PARTS RENEWABLE - PAT'D JULY 10 - AUG. 14, 1906 - EDMONDS METZEL MFG. CO. - CHICAGO - - 9" comb. double alligator wrench with replaceable teeth, screwdriver, three rethreading dies, and two square box wrenches, laminated construction. Patented Jul. 10, and Aug. 14, 1906 (Nos. 825,401 and 828,859) by John Merckens of Chicago, ILL. Good++. (S9) *PAT* and *PAT*

0294. THE H .D. SMITH & CO - 3/4 (1-1/4" actual opening) / PERFECT HANDLE - PATENTED - - 11" single open end wench with wood knife type slab handle. Good+.

0295. Lot of 3
(1.) M. H. T. CO. - 7/8 - 13/16 - - 13.5" double box end wrench. Have seen this identified as "Massey Harris Tractor Co. but could be McKAIG-HATCH Tool Co.? Good+.
(2.) Can't read markings - - 10.25 " double alligator wrench. Pitting.
(3.) THE HAWKEYE - O. V. B. Our Very Best logo - H. S. CO. (Hibbard, Spencer, Bartlett Hardware Co. - Chicago) - - 7.78" double alligator wrench with rethreading dies. Rare house branded Hawkeye wrench. Good++.

0296. SHAW WRENCH - PAT. APR. 26. 1910 (with Billing's "B" in a triangle logo) - - 7". alligator wrench. Excellent. (S36)

0297. Lot of 2
(1.) Unmarked - - 8.25" specialty pliers with a thread rod of unknown purpose. Good++. (no info found)
(2.) Unmarked - - 7" shoe maker's pliers and hammer. Looks like be John Knell's (of Philadelphia, Penn.) Mar. 13, 1888 patent. Good++. *PAT*

0298. Lot of 2
(1.) FITS-ALL WRENCH CO. - Prov. RI. / FITS-ALL - PATENTED - TYPE D (with A Swastika logo) - - 6.5". dog bone wrench with ten openings. Made by the Buffum Tool co. of Louisiana, MO.? Good+. (S889).
(2.) THE HANDEE - PAT APPL'D / MANSFIELD OHIO - - 8" dog bone revolving head multi-socket wrench. Longer variant. Good+. (S289)

PiCs Lots 293 thru 298

0299. Lot of 6
(1.) DUPONT NO. 2 - - 7" dynamite cap and fuse combination pliers. Good++.
(2.) Unmarked - - 10.25" plier type tool. Have seen this identified as both a hair straightener and a blank bullet mold pliers. Good+.
(3.) McKAIG-HATCH - BUFFALO NY USA - - &" combination pliers, hammer and screwdriver. Good+ with some light pitting.
(4.) MORRILL ? (weak markings) - PAT APL'D FOR - -5.5" unusual small pliers with parallel jaws. Good++.
(5.) BELDEN - 7505 - MADE IN CHICAGO USA - CHROME VANADIUM STEEL / DES 119441 - - 7.5" combination battery pliers with two box end wrenches on end of handles. Good++. Design patent was issued to William Sandy of Chicago on 3-12-1940 and assigned to Duro Metal Products Co. also of Chicago. Good++. *PAT*
(6.) E. M. WORDEN - LADYSMITH, WIS. - PAT. JULY 25, 1911 -- 7.75" combination plier type tool. patented by Edgar M. Worden of Ladysmith, Wisc. as a "Tool for Operating on Cotter Pins" with wire cutters, screwdriver, nail or tack claw. Made by N. W. Mfg. Co. of Fort Atkinson, WIsc. Good++ with some weak markings. *PAT*

0300. EIFEL-FLASH PLIERENCH - 8-1/2" B - '22 / THE FLASH SALES CORP - CHICAG0 - PAT. MAY 2, 1916 - - 9" early Model "B" Eifel pliers with pouch and four extra jaws. Excellent. *PAT*

PiCs Lots 299 and 300

0301. GK219 <M-H> / <M-H> GK220 - - 4" Massey-Harris steering wheel knob. Good++.

0302. Unmarked - - 6" cast household combination tool which can be used as a trivet, meat tenderizer, pot lifter, etc. Patented by William Henry Thayer of Cleveland, OH on May 24, 1881. Rough casting may be an older reproduction? *PAT*

0303. RUMELY - - 8" sharpening wet stone. Scarce Rumely item. Good+, shows some signs of use.

0304. Unmarked - - 11.25" combination bootjack and wrench with a heart shaped cutout. One of the rarest of known bootjacks with a wrench. Good++, with old red paint?

0305. Lot of 2
(1.) Unmarked - -6.25 " flat tapered multi-wrench with nine square openings. Excellent . (no info found)
(2.) WM HANNAFORD (on both ends) - 1856 / -WM HANNAFORD (on both ends) - 1856 - - 7.5" flat multi-wrench with two open ends and six square openings. Early dated pre Civil War wrench. Good++ with plated finish. (S890 with no info)

0306. ANIMAL COMB - MADE BY E. B. FRYE & SON - WILTON, NH - USE ON CATTLE, HORSES, SHEEP, HOGS, DOGS - - 8" wood livestock comb with wire bristles. Good++.

0307. GOODS PAT - MAY 15, 1900 - 803 - - 8" cast quick release coupling for windmill pump rods. Patented by Thomas B. Good of Blooming Grove, Wisc. Excellent. *PAT*

0308. PARKER - - 10.5" heavy cast special wrench and nut for Parker vises? Patent No. 71,885 for "Improvements in Clamp-Screws" issued to Charles L Kingsley of Meriden, Conn. on Dec. 10, 1867. Excellent. (R4-188) *PAT*

PiCs Lots 301 thru 308

0309. MADE BY STRIEBY & FOOTE CO. - NEWARK, NJ - PAT. SEPT. 13, 1904 / TOOL STEEL- - 18" comb. plier type tool with pliers, leather punch, wire cutter, wire twister, wire stretcher, etc. in the original box labeled: "Mfg. by Strieby & Foote Co. Makers of High Grade Drop Forgings - Newark, N. J. - Patented and sold by The Coulter Tool Co. San Antonio, Texas. An original twelve page instruction brochure is also in the box. Patented by Newton J. Tate of Weatherford, Texas. Tool is Excellent New Old Stock. (Smith 134) *PAT*

0310. Unmarked - - 14" combination fence stretching tool and screwdriver or pry bar, nail claw and pliers. Patented by William Brown of Bayneville, Sedgwick County, Kansas on May 29, 1900. Pitted. (Smith 90) *PAT*

0311. Unmarked - - 17.25" crow bar type combination fence wire tool made by the Duo-All Mfg. Co. of Beatrice, Neb. Excellent. (Smith 378)

0312. Unmarked - - 5.5". Rare cast in-line wire tightener. Patent No. 1663182 was issued to Frank Semmler of West Allis, Wisc. on Mar. 20, 1928. Excellent. (Smith 691) *PAT*

0313. BROWN FENCE CO. - CLEVELAND O. / BROWN FENCE CO. - CLEVELAND O. - - Two part cast fencing tool with a ratcheting center section and lever lock. Seldom found complete. Good++. (Smith 701)

PiCs Lots 309 thru 313

0314. Jun. 14, 92 - May 9, 93 - - 11.25" PAT'D JUNE 14, 92 - MAY 9, 93 - - 11.25" primitive looking pliers and wire cutters. Patent was granted to Sanford O. Root of Lodi, New York. Excellent condition. (not listed) *PAT* and *PAT*

0315. Unmarked - - 11" fence wire barbing tool. Identified as a Knickerblocker Barbing Tool in Smith's book,. Good++. (Smith-163)

0316. Unmarked - - 13.25". United States Cavalry picket fence stake pin with hammer head and nail claw with a modified pry bar end. Good++. (Smith 207)

0317. Unmarked- - 12." early cast barbing tool. Solid handle variation.. Patent was issued to John Dobbs and Benjamin F. Booth both from Victor, Iowa on 10, 1875. Excellent. (Smith-170) *PAT*

0318. Unmarked- - 12." early cast barbing tool. Hollow handle variation. Same patent info as solid handle version above. Pitted. (Smith-165) *PAT*

0319. Lot of 2
(1.) Unmarked (Perkin's patent) - - 10.5" fencing pliers which according to Smith's book were patented by a Perkins on Jan, 4, 1898. Excellent. (Smith-36 - patent not found)
(2.) PAGOMA SHIELD OF QUALITY (in a shield logo) - - 9.5" fencing pliers. Pagoma was a trademark for hardware wholesaler Paxton and Gallagher of Omaha, Neb. Excellent.

0320. Unmarked - -9" plier type tool similar but not exactly like the fence stray applying tool at Smith-102). Excellent.

0321. SEWARD CO. - CHICAGO ILL - PAT NO. 2212080 - - 9.25" Staple puller. Patent was issued to George A. Seward of Rossville, Georgia. Excellent. (Smith-196) *PAT*

PiCs Lots 314 thru 321

0322. Lot of 2 heavy cast fence stretcher parts - - 4". Both marked PAT'S 3-25 -08 & 3-26-12 / SPP 4. Owner said they are part of a lever fence stretcher shown at Smith-957. They are as found in rusty uncleaned condition with some unreadable markings.

0323. Lot of 2 cast fence post wire tighteners. Both marked PAT MAR 91 - - 3.5". Excellent. (similar to Smith-594 patented on Sept. 9. 1884 by Frank Bissell)

0324. Marked only "8" - - 7" heavy cast in-line fence stretcher. As found uncleaned. (Smith-640)

0325. Unmarked - - 6" stretcher with a post dog, Patented by William M. Forsythe of Dubach, Louisiana on Oct. 10, 1933. Excellent. (Smith-755) *PAT*

0326. Lot of 2
(1.) REPUBLIC FENCE - - 3.25" fence wire splicing tool. Good+. (Smith-743)
(2.) CONTINENTAL STEEL CORP. - - 4.25 " fence wire splicing tool. Excellent. (Smith-737)

PiCs Lots 322 thru 326

0327. E. A. BERG-ESKILSTUNA-SWEDEN-29N - - 10.25" combination fencing type tool with hatchet, hammer, wire cutter, plier wrench, nail claw, screwdriver, etc. E. A. Berg main products were wood chisels. Good++.

0328. RED VIKING - BOX 228 - BLOOMFIELD, IND - PAT PEND. -FE-3 - - 11" combination fencing type tool advertised as "11 Tools in 1" with hatchet, hammer, plier, nail puller, screwdriver, wire cutter, staple puller, pipe wrench, tack pry, wire stretcher and bottle opener. I think they were made by the Bloomfield Manufacturing Co. (same company that makes the HI-Lift jacks). Good++. (Smith-1)

0329. PAT'D - MARSHALLTOWN, IA / DROP FORGED TOOL STEEL - - 12.5. Combination fencing tool with hammer, hatchet, leather punch, tap holders, nail claw and screwdriver. Patented on Jul. 19, 1898 by John R. Morris while still living in Jewell, Kans. Good++. *PAT*

0330. PAT'D - MARSHALLTOWN, IA / DROP FORGED TOOL STEEL - - 12.5". Rare combination fencing type tool with hatchet, hammer, plier wrench, nail claw and screwdriver, Etc. The hammer head and hatchet are removable and interchangeable with several other attachments originally furnished with this tool. Patented on Mar. 14, 1905 by John R. Morris while still living in Jewell, Kans. One of the hardest Morris tools to find. Excellent but the hammer head attachment has a weld repair and the leather punch is missing. (Smith 895) *PAT*

0331. WASHINGTON / HATCHET - - 10". Rare combination fencing type tool with hatchet, hammer, plier wrench, nail puller, screwdriver, wire cutter, alligator wrench, tap holders, etc. Good++. (Smith-9)

0332. Unmarked (Roseman's patent) - - 11". Rare combination fencing type tool with hatchet, hammer, plier wrench, nail puller, screwdriver, and alligator wrench. Patented Oct. 27, 1896 by Frank A. Roseman of Lanham, Neb. Listed as "Not known to have been produced" on DATAMP. Good++ with original red finish? (Smith-4) *PAT*

PiCs Lots 327 thru 332

0333. Unmarked - - 13" combination wire fencing hatchet type tool with a hammer head, wire cutter and screwdriver. Good++ with original plated finish. (Smith-18)

0334. STANDARD SAW & TOOL MFG. CO. KAN???? (last few letters are not readable) / PATENTED APRIL 1908 - - 14" combination wire fence tool with a hammer, staple puller, claw stretcher and a pry bar type end. I think the actual patent date is May (not April) 1908 which was issued to James E. Koehler of Coudersport, Penn. (patent No. 886987). Not listed in Smith's book and I couldn't find any info on the company. Good++. *PAT*

0335. PAT. MAY 23, '11 (Highsmith's patent) - - 11" very rare combinnation wire fencing tool consisiting of a claw hammer, alligator wrench and a staple setter with a gauge bar. Patentd by Aubrey Highsmith of Dallas, Texas. Good++. (Smith-181) *PAT*

0336. Unmarked (Hoyt's Patent) - - 11" all metal early combination ball peen hammer and a nut wrench with a bolt and wing nut adjustment. Patent was granted to Lewis and Elais Hoyt of Croton Falls, NY on May 29, 1866. Good++ (S-798) *PAT*

0337. Unmarked - - 10.25" different style all metal hatchet combination tool with a hammer, chisel? and two nail pullers. I have seen a larger version of this tool. Good++. (no info found)

0338. Lot of 2
(1.) LAWRENCE KEILSTRUP - - 5.25" knife wrench combo TOOL with Crescent type wrench. Excellent.
(2.) BARCALO BUFFALO USA - PAT D111564 - - 6.25" combination tool with a hammer, screwdriver, jar, bottle and can openers, etc. Patented 10-4-1938 by Ernest Cullen (San Diego, Calif.) as a "Combination Kitchen Tool". Good++. (not listed) *PAT*

0339. EDWIN LOUDERBACK & CO - PHILADELPHIA, PA - PATD MAY 1, 1883 (some markings are not readable) - - 11" (larger size) combination. tool with at least 10 functions including several plier type tools, punch, hammer, cutter, vise, screwdriver bit (which is often missing), etc. Patented by Robert Erdman & William Phillips of Philadelphia, Penn. Good++ with fomer owner's stamped id "F. W. Martin". (S817, C204) *PAT*

0340. G. A. GLOOR - PATENTED - CHICAGO (weak markings, not all readable) - - 7" comb pliers with wire cutters and alligator wrench. Patent not found. Good++. Rare (not listed)

0341. Unmarked --11.5" real odd combination tool with a small hammer head, alligator type wrench with a spring assisted sliding lower jaw with what looks like three different functions and a screwdriver bit holder on the end. Good++. (not listed, no info found)

PiCs Lots 333 thru 341

0342. 131L - IHC logo - - 14" by 7.5". Tee socket wrench. Excellent.

0343. CHATTANOOGA PLOW CO / F66 (also IHC) - - 11.75". Ultra rare, neat looking wrench. Only second one we have had to sell. Excellent. (R1-99)

0344. MCORMICK E629J - - 13.75" face spanner wrench with no IHC logo variant. Good, some light pitting, weak markings. (R1-319)

0345. J1506 - J1507 (IHC whole No. M43823) with IHC logo - - 16.5" ratchet, angled handle variant. Good++.

0346. 2108V - - 11.5"axle nut wrench. New paint.

0347. L320 with Plano logo / PATENT PENDING (Plano Mfg. Co. - Plano, Illinois / Later IHC) - - 8". Lower jaw and open end wrench assembly only. Good+, some blurry markings.

0348. E435 (IHC) - - 9.75" cast crank with square socket. Good+.

0349. OSBORNE (in cutout letters (D. M. Osborne / IHC) - - 6" CUTOUT wrench with screwdriver. Wrench on the top edge variant. Excellent. (R1-363)

0350. K1500 (Minnie Harvester Co, - St, Paul, Minn. and IHC) - - 8.5". Scarce doe-s wrench. Good+, some pitting. (R2-203)

0351. Lot of 2
(1.) D137 (Chattanooga, David Bradley, IHC, Benicia Plow Works,) - - 11" with hammer head. Light pitting. (R1-99, R1-50)
(2.) 1-1/4 - - 350370R1 - - 1 (IHC) - - 14" double12-point box ends. (no logo variation). Excellent.

PiCs Lots 342 thru 351

0352. Unmarked (IHC No. G84312) - - 4.75" by 6 tin funnel. Excellent.

0353. Lot of 2
(1.) P397 / IHC logo - - 11.5" cast planter stake hook.
(2.) 1851A - IHC logo - - 6" cast foot pedal.

0354. IHC logo - - 2-3/8" diameter brass hubcap. Good+.

0355. IHC logo - - 2" diameter steel hubcap. Good++.

0356. 495W - PAT. APPLIED FOR (with IHC Logo) - -8" by 10.5" cast International Harvester wagon reach plate.

0357. 846V (IHC) - - 3" by 4" cast wheel puller. Excellent.

0358. Lot of 2 all iron Crank Handles
(1.) V624 (with IHC logo) - - 10.25 ". Binder crank. Pitting on back side only.
(2.) V996 (Acme) - - 10". Excellent.

PiCs Lots 352 thru 358

0359. A framed collection of nine blacksmith made from files tools. Includes a drawknife, several wrenches and an exceptional tin snips, etc. 18" by 22". Excellent.

PiCs Lot 359

0360. Circa 1920's advertising mailer / poster for McCormick-Deering Manure spreaders. Shows both horse and tractor drawn spreaders. Date code is July 1921. Measures 17.5" by 23.5". Excellent condition, never mailed. It is protected in a thick plastic top loader.

PiCs Lot 360

0361. Pair of JAMES cast harness brackets with CUTOUT letters - - 12" From Jamesway of Ft. Atkinson, Wisc., Elmira NY and Minneapolis, Minn. Excellent, as found uncleaned condition. Note: I have been informed that these were brackets that held feed carriers rails in dairy barns.

0362. Lot of 2
(1.) Y310S (Deere Check Row Planter?) - - 8" cast foot rest or pedal. Excellent.
(2.) RODERICK LEAN - MANSFIELD, O. USA - -- 11.75" tin tool box. Good++.

0363. Lot of Two: Tool box marked only 776 and wrench marked only "A" (Janesville Machine Co. - Janesville, Wisc.) - - 10.25" tool box with slots to hold the Janesville "A" wrench. Excellent.

0364. MCCORMICK - CHICAGO - U. S. A / M539 - - 10.75" cast tool box lid. Good++.

0365. M1410 and IHC logo - M1411 and IHC logo - MCCORMICK - CHICAGO - U. S. A - - 15" heavy cast tool box lid with hinged oil can holder. Good++.

PiCs Lots 361 and 365

0366. GOOD LUCK with a horseshoe illustration / POMEOY'S MAY 13, 1902 PATENT - - 7" cast riveter. Patented by Henry C. Pomeroy of Chicago, Illinois. *PAT*

0367. UNCLE SAM - SHEENAN MFG. CO. - SALEM, O. (with a caricature of Uncle Sam) / PATENTED DEC. 14, 1897 - PAT. PENDING - - 12.75" cast leather riveter. Patent was issued to Warren J. Ball of Salem, Ohio. *PAT*

0368. TOM THUMB - PAT. APLD FOR / THE SHEEHASN MFG. CO. - SALEM, O. USA - - 9' cast riveter

0369. Unmarked - - 7.75" fancy cast notary seal press? Excellent with Japan finish on the body and plated lever.

0370. UNCLE SAM (with a caricature of Uncle Sam) / Patented Jan 21, 1896 - - 12.75" cast leather riveter. Patented by Frank A. Jaberg of New Philadelphia, Ohio. Excellent with most of the original Japan finish. *PAT*

0371. PLYMOUTH ROCK - - 11"s cast leather riveter.

PiCs Lots 366 thru 371

0372. SCHULTES - NO. 11-24 - - 24" cast iron level. In a web search all I could find were Schultes aluminum levels not cast iron. Excellent with one small chip on edge of the base.

0373. DIAMOND EDGE -NORVELL-SHAPLEIGH HDW. CO. - ST. LOUS USA (with D-E and n arrow in a diamond logo) - - 23.5" metal level and inclinometer with three vials and brass plates: A vertical, a horizontal and one with inclinometer degree markings. Very good, looks like a repaint with a few light scratches.

0374. STANLEY NO. 34 - MADE IN USA --6" cast iron "Oil Burner Level" for leveling range oil burners. Excellent, like new.

0375. C. S. CO. - (Chapin Stephens) PINE MEADOW, CONN. USA - REMOVE PLATES TO ADJUST - - 28" wooden inclinometer level. Good++ with some minor scratches, area of tarnish on top brass plate

0376. C. S. CO. - (Chapin Stephens) PINE MEADOW, CONN. USA - REMOVE PLATES TO ADJUST - - 28" wooden sight level with a pop-up sight. Good++ with some minor nicks and scratches, one screw missing on brass side plate.

PiCs Lots 372 thru 376

0377. 202 1/4 - - 10" square socket wrench. Not listed but looks like Case Threshing Machine Co. 292 1/4 wrench? Good.

0378. 2841 (Joliet Mfg Co., Joliet, Illinois) - - 4" by 8" Tee socket wrench. Shaft is slightly twisted otherwise excellent. (R1-273)

0379. Lot of 2
(1.) Marked only "D" (orphan - - 8" extra thick cast wrench. Excellent.
(2.) 179 (orphan) - - 12" with large 3.25" open end. Excellent.

0380. BAKER ICE MACHINE CO - - 6". Excellent.

0381. 296 (Nichols & Sheppard, Battle Creek, Mich.) / "B" in a diamond logo - - 6" double open end Good++. (R1-352)

0382. 333F (Garden City Feeder Co. - Pella, Iowa) - - 12" Cast spanner wrench. Excellent except for a drilled hang hole. (R2-110)

0383. 888C (Case Threshing Mach Co.) - - 5.5". One of the smaller of the Case Steam Engine wrenches. Pitting. (R1-81)

0384. 7326G (Geiser Mfg Co - Waynesboro, PA) - - 6" by 8.5" Tee socket wrench. Good+, one jaw has a casting flaw. (R3-91)

0385. Lot of 2 F & N Lawn Mower Co. (Richmond, Ind.) Wrenches (R1-172, R2-93)
(1.) F. & N CO. - - 5". Good++.
(2.) NO. 30 - F. & N, LAWN MOWER CO. / William's "W" in a diamond logo - - 7.5". Excellent.

PiCs Lots 377 thru 385

0386. Lot of 3
(1.) "A" (orphan) - - 8.25". Good++.
(2.) "B" (Orphan) - - 8". Good++.
(3.) Unmarked (orphan) - - 8". Good+.

0387. Lot of 2
(1.) 35BX / X (orphan) - - 9.5". Good+.
(2.) 1904 (orphan) - - 8.5" odd ball with tall rib on top side and flat on back side. Good+, weak markings.

0388. Lot of 2
(1.) 162 (orphan) - - 7.5". Pitting.
(2.) R298 (orphan) - - 10.5" with six round and one square holes. Pitted.

0389. 7364L (Wm. E. Pratt Mfg. Co. - Chicago, Illinois) - - 7" Deering Style. Excellent. (catalog illustration at R1-385)

0390. 28 (orphan) - - 9.5". Neat looking wrench with light pitting.

0391. R11 (Gale) - - 9". Two open ends by octagon box end. Excellent. (R2-109)

PiCs Lots 386 thru 391

0392. Lot of 2
(1.) K386 (Walter Wood - Hoosick Falls, NY) - - 8" with two spanner pegs. Good+. (R2-300)
(2.) 193S (orphan) - - 7.5" with large 2-3/4" open end. Excellent.

0393. Lot of 2
(1.) C619 (Appleton Mfg Co. - Batavia, Ill.) - - 7.5". Excellent. (R1-21)
(2.) 378 (Frost & Wood - Smith Falls, Canada) - - 7.25". Good+. (R1-188)

0394. Lot of 2
(1.) 1898W (Minneapolis Threshing Machine Co. Stillwater, Minn.) - - 8" cast double open ended wrench for Wrench for Kingston carburetors on MTM Gas Tractors. Good++. (R3-154)
(2.) 63 (orphan) - - 7.75". Excellent.

0395. Lot of 2
(1.) 72 - 9A (Utter Mfg. Co, _Rockford, Illinois?) - - 10". Similar but not exactly like wrench at R1-497) Good.
(2.) T5 (indistinct markings) (orphan) - - 9" handle or wrench with an open sided square opening. Good+.

0396. Lot of 2
(1.) E30 (orphan?) - - 10". Rathbone lists a E30 under Massey-Harris in the supplement but no picture. Emerson type. Excellent.
(2.) H112 (Ohio Cultivator Co / Sechler) - - 9.5". Good++ except for hammer head damage. (R1-357, R1-419)

0397. Lot of 2 Samson Tractor Co. - Janesville, Wisc. Wrenches
(1.) 750368 with "CH" logo) - - 9.50". Replaced the Janesville Machine Co. wrench marked "J. M. Co.". Good+. (R3-195)
(2.) 750367 with "CH" logo - - 9". Replaced the Janesville Machine Co. "B" wrench after the formation of the Samson Tractor Co. Excellent. (R2-256)

PiCs Lots 392 thru 397

0398. Lot of 3
(1.) D783 (orphan) - - 9" single hex box. Excellent.
(2.) W75 / "P" in a square logo (orphan) - - 5.75" by 8" tee socket wrench. Excellent.
(3.) 614 (orphan) - - 11" oddball. Excellent.

0399. S702 / FOR WATER PUMP NUTS ONLY - 2-11/16" (Caterpillar) / MADE IN USA - - 10.75" large single open end. Excellent. (R1-86)

0400. 139M (Minneapolis Threshing Machine Co) - - 7" Steam Engine set screw wrench. Good++. (R2-204)

0401. Lot of 3
(1.) OP123 (Orphan) - - 8". . the "OP" prefix suggest an Osborne/IHC/Emerson wrench but no proof has been found. Excellent, as found not cleaned.
(2.) #562 (Russell & Co. - Massillon, Ohio) - - 9.5". This double ended spanner wrench is listed in Russell's steam engine parts lists. Good+ with light pitting and very faint markings. (not shown in Rathbone's books)
(3.) CANCO / 312769 - - 8". Good++. (no info found on Canco)

PiCs Lots 398 thru 401

0402. 85E (Rawlings Garden Cultivator) - - 6.5". Similar to SC25 Syracuse Chilled Plow Co. / Deere wrench. Good+. (R4-201)

0403. Lot of 4
(1.) 5024 (orphan) - - 6.25" open end with a stove or range lid lifter? There is also a similar 5024X wrench. Excellent.
(2.) R1108 (Anker-Holth -Port Huron, Mich.)- - 4.75". Scarce cream separator face spanner wrench. Excellent (R1-20)
(3.) 10 (orphan) - - 3.5" by 5.5" open end by square L-wrench. Excellent.
(4.) W19 (orphan) - - 5" face spanner wrench. Excellent.

0404. Marked only "K" - - 6.25" unusual alligator wrench with stove lid lifter on one end. First one seen. Excellent.

0405. H & D (Hench & Dromgold - York, Penn.) - - 5". Good++. (R1-228)

0406. PAPEC / 72 (Shortsville, NY) - - 7.5". Good+, some light pitting. (R1-368)

0407. Lot of 2
(1.) C5 (orphan) - 6.5" cast three opening wrench including a center wing nut wrench. Excellent.
(2.) G70 (Madison Plow Co. later Fuller & Johnson) - - 7.25". Good++. (R1-305)

PiCs Lots 402 thru 407

0408. Lot of 2
(1.) 2600 with a star logo - - 7". Good++.
(2.) C74 (orphan) - - 9" with large 3-1/2" single opening. Excellent.

0409. TS (Towers & Sullivan) - - 12.5 by 12.5" odd ball "L" wrench with large square box wrench on top. Pitted. (R4-240)

0410. Lot of 2
(1.) BRIDGE TOOL CO. ("StL" in a circle logo) / A - - 7.25" doe. Simmons Hardware brand. Good++. (see R1-63)
(2.) WAYNE MFG CO / 24 - - 5.75" doe wrench. Excellent. (R1-483)

0411. GEISER MFG' CO. / WAYNESBORO PA. 597G - - 15.75" Steam Engine wrench. Good+ (light pitting, tight jaw crack) (R2-113)

0412. Lot of 3
(1.) 474 (Ontario Drill Co. - East Rochester, NY) - - 6.75". Good+. (R2-226)
(2.) CW (Blizzard Mfg. Co. - Canton. Ohio) - - 6.25". Good+. Some pitting. (R2-36)
(3.) HARD BROS & CO / ONEIDA NY - - 5.25" cast wrench. Hard Bros. made bed springs. Good+. (R1-481 as Ward Bros.)

PiCs Lots 408 thru 412

0413. Lot of 3
(1.) DISC / 217 (Johnston Harvester & Massey-Harris) - - 14.5". Good++. (R1-272, R1-311)
(2.) SILVER - 2134 (Silver Mfg. Co. - Salem. Ohio) - - 13.5". Only second one we have had to sell. Good+ with deep pitting on one end. (R1-424)
(3.) UX5 (Gehl Bros. and Western Land Roller) - - 14.75" Silo filer wrench. Excellent. (R2-112, R2-292)

0414. D138 (Chattanooga, IHC, David Bradley) - - 12.5" with disk straightening slot. Good+. (R1-99)

0415. DH29 (orphan) - - 16". Excellent.

0416. Lot of 5
(1.) GALE / DG847 - - 11". Flat steel. Good with edge hammer damage. (R1-193)
(2.) C.B. & Q. (Chambers, Bering, Quinlan Co. - Decatur, Illinois, also IHC or Chicago, Burlington and Quincy Railroad) - - 7.5". (R1-73)
(3.) 25452 (orphan) - - 10". Hex box by hook spanner. Excellent.
(4.) L47 (Moline) - - 7.5" Excellent. (R1-333)
(5.) 2420A (David Bradley?) - - 9.25". Good+. (not In Rathbone, Gil Irps ID)

PiCs Lots 413 thru 416

0417. 3562A / 1-7/16 - 1-3/8 and an arm and hammer logo (Caterpillar) - - 14". Good++. (R1-87 wrench list listing.

0418. WP. HL. 265H - J (orphan) - - 13". Odd cast hex box by hex box. Excellent. (no info found)

0419. 1249 (A. C. Evans - Hammond, NY) - - 14" Good+, some light pitting.(R3-77)

0420. 1D3363 - U (Caterpillar) - - 13.75" hub wrench. Good++. (R1-86)

0421. D78 (orphan) - - 15.5" odd ball. Good++.

0422. STOVER MFG. CO. - FREEPORT, ILL - - 14". Good++. (R1-443)

PiCs Lots 417 thru 422

0423. 02 with a diamond logo (Ellis Keystone Agricultural Works - Pottstown, Penn. - - 9.5". Excellent. (R 4-71)

0424. Unmarked (orphan) - - 7.75" odd Ball. Excellent.

0425. 5715A (David Bradley) - - 6.5" Socket wrench. Excellent. (R1-126)

0426. Reeves / 3379 (Reeves & Co. - Columbus, Indiana, later Emerson-Brantingham) - - 7.5". For gas engine tractors. Good+ with pitting. (R1-393)

0427. Lot of 3
(1.) M B. SKINNER CO - SOUTH BEND IND. USA / SEAL WRENCH FOR CLAMPS - 7/16" BOLT - 1/2" BOLT etc. - - 7.5". Cast. double square box end wrench. Good+.
(2.) H & F CYL. WRENCH / USE H & F AMMONIA - - 7.25".Pitted. (R3-98)
(3.) IOWA (Iowa Cream Separator - Waterloo, Iowa) - - 7.5". Some pitting.

0428. H46 (Stoddard and Thomas Mfg) - - 6.5". thick with hammer head. Excellent. (R1-254, R1-441)

0429. A-68 (American Drill Co. - Marion, Indiana) - - 9". Good++. (R1-13)

PiCs Lots 423 thru 429

0430. 94 (Avery Co - Peoria, Illinois) - - 7" x 13.75" Tee socket wrench. Excellent. (R2-18)

0431. E73 (orphan) - - 8.25 ". Interesting cast square socket with 2 open end openings. Excellent.

0432. 882C (Case T. M. Co.) - - 9.25" doe for Case Steam Engines. Good+, light pitting. (R1-81)

0433. 91 (Johnston Harvester - Batavia, NY) - - 11.75" Good+ with faint markings. (R1-272)

0434. Lot of 2
(1.) FERGUSON - TO-17014 (markings on jaw faces) - ruler markings - - 10.25". Scarce. Good++. (R1-178)
(2.) 180108M1 <MHF> - 11/16 - 1-1/16 (Massey Harry Ferguson) / ruler markings - - 10.25" all markings but sizes on shaft variation. Excellent. (R2-184)

0435.
(1.) E39 (Iron Age / Bateman) - - 8.5" with hammer head. Same part number as Iron Age cut-out wrench. Good++. (R3-21)
(2.) Unmarked with two turnip shaped cutouts on the shaft - - 6.75". 1" shorter than others seen. Looks like Madison Plow / Fuller & Johnson A144 wrench. Excellent. (R3-85)
(3.) 459 1/2 (orphan) - -8.5". Unusual fractional number on a Farmers S-Wrench. Good+, light pitting.

PiCs Lots 430 thru 435

0436. NACO - PAT 1919 - - 7.25" comb. pliers, wire cutter and screwdriver. Pliers has an usual screw adjustment to set the jaw opening. Patent was issued to Dan B. Swickard of Galva, ILL. on Oct. 28, 1919. Good++ with some light scratches on the plated finish. (S248) *PAT*

0437. 92-10 UTICA TOOLS - USA PAT. APL'D FOR / ALLOY-UTICA-STEEL - -10" Crescent type with a lever that lock the jaws in place. Patented by William A. Barnes of Utica, NY on Jan. 10, 1956. Excellent. *PAT*

0438. 10" FORGED CRESTOLOY STEEL - MADE IN USA - PAST. PEND. / MFD. BY CRESCENT TOOL CO. - JAMESTOWN, NY - - 10" Crescent wrench with the Crestolock locking tab. Good++.

0439. PERFECTION WRENCH - PORT CHESTER, N.Y. / PATENT JUNE 25, 1907 - OTHER PATS PENDING - - 12" lever operated quick adjust wrench advertised as a bolt and pipe wrench (the jaws can be reversed for smooth or serrated) and as a vise, clamp, jack, and tool holder. This has to be the most complicated wrench ever produced, besides the large lever there are two other small levers and a tension thumbscrew. If you get the levers all aligned with the stars you can either lock, quick adjust or ratchet adjust the jaws. Patented by George Alexander McIntire of Port Chester, NY. A real wrench gizmo in Excellent, uncleaned condition. (not in Schulz, see Cope page 248 for operating instructions) *PAT*

0440. STEMOR - PASRTIAL FORGED - OCCUPIED JAPAN / 3/8x6" ANGLE WRENCH - - 6.25" Crescent type. Rare to find an Occupied Japan wrench. Excellent, new old stock with partial original box.

0441. PLYMOUTH FORGE 4" / FORGED ALLOY STEEL - - 4.25 " Crescent type. Excellent, like new.

0442. IREGA - NO. 77-4" - ALLOY DROP FORGED / IREGA - NO. 77-4" - FULLY DROP FORGED - SPAIN - - 4" Crescent type Wrench. Excellent, like new.

0443. Unmarked - - 7" cast malleable iron screw adjust nut wrench made with only three pieces. Mfg. by the Girard Wrench Mfg Co. of Girard, Penn. and patented. by C. H. Miller of Erie, Penn. on July11, 1892. Good+. (S392) *PAT*

PiCs Lots 436 thru 443

0444. Unmarked - - 6,25" cast combination hammer and three open ends. Good++.

0445. PAT MAY 16, 1871 / WARRANTED MALLEABLE - - 8" combination plier type tool consisting of two open end wrenches, adjustable size wrench, cutter, nippers, screwdriver bit, etc. Patented by George Capewell of Cheshire Conn. Mr. Capewell later founded the Capewell Horse Shoe Nail Company. Good with dings, one cutter blade and screwdriver tip are broken. (S811) *PAT*

0446. Unmarked (K & B Combination Wrench - - 7" plier type adjustable nut and pipe wrench. Advertised by Kilborn &. Bishop of New Haven, Conn. as "Six Tools in One". Patent was granted to Townson Hand - Orlando, Florida on Dec. 07, 1915. Excellent uncleaned condition. *PAT*

0447. PAT. APL"D FOR (Pfeiffer'S Patent) - - 7.25" slip joint pliers with a worm and rack teeth locking adjustment. Others seen marked "Pfeiffer's Pincer Wrench - Pat Apr 6, 1915" Patented by I. Pfeiffer Jr. of Bedford, Mass. Good++. (S251) *PAT*

0448. Unmarked - - 8.5" pliers and wire cutter with a setscrew to set the jaw opening. Good++.

0449. BICYCLE NO 7 - C. S. B. CO. - CHICAGO (most of the markings are not readable)- - 7" all metal loop handled rack type quick adjust bicycle or pocket wrench. Good with light pitting. (S540)

0450. CRONK (Cronk and Carrier - Elmira, NY) - - 6.5" sliding bolt type quick adjust alligator wrench with a hex box on the opposite end. Patent issued to William Cronk of Montour Falls, NY on Oct. 22, 1912. Excellent. (S450) *PAT*

0451. BULL TERRIER (in Whitman & Barnes diamond logo) - PAT. MAR. 26, 1901 - MADE IN USA - - 6.75" screw adjust alligator wrench. Patent was granted to Henry J. Martin of Chicago, IL and assigned to the Whitman & Barnes Mfg. Co. of Akron, Ohio. One of the rarer Whitman & Barnes Wrenches, only third one we have had to sell. Good++, weak markings. (not in Schultz, C330) *PAT*

0452. THE BILLINGS & SPENCER - HARTFORD, CONN. USA - E ("B" in a triangle logo) - ORD DEPT USA - - 6.75" Billing & Spencer's Model "E" wrench made for the US Army's Ordinance Dept. Good+ with light pitting.

0453. EFFICIENT WRENCH - CLEVE. OHIO (with a "S" in a diamond logo) - - 7" quick adjusting rack type alligator wrench patented by William S. DuCharme of Cleveland, Ohio on Feb. 11, 1919. Seldom found. Excellent. (S668, C127) *PAT*

0454. GORDON AUTOMATIC - PAT'D APPLIED FOR (same markings both sides) - - 6" quick adjust Crescent type . Patented by William Gordon of Union, New Jersey on July 22, 1924. Good++. (S493) *PAT*

PiCs Lots 444 thru 454

0455. Lot of 4
(1.) 445 (orphan) - - 12.75" cast fire hose coupling wrench. Excellent.
(2.) ET3 - SIZE 0 - TITAN WRENCH - VWO / GEARENCH (sic) INC. UJSA - - 8' valve handle wrench. Excellent, like new.
(3.) 5/8 / 5/8 - - 10.25" cast silo type wrench. Good++.
(4.) TM49 with "STL" in a circle logo (orphan) - - 12" hex box by face spanner. Good++.

0456. 1B5175 (with a horizontal "T") (Caterpillar) - - 7.5" Drain plug wrench. Excellent. (R3-43)

0457. 1B5171 (with a horizontal "T") (Caterpillar) - - 8.5" Drain plug wrench Excellent. (R4-40)

0458. 6F3703 (with a horizontal "T") / -- 3 -- (Caterpillar) - - 8.75" Drain plug wrench. Excellent. (R3-43)

0459. Lot of 3
(1.) CASE / 76L (Case T. M. Co.) - - 7" Grain Drill wrench with stud. Good++. (R1-77)
(2.) K439 / "P" in a circle logo (Osborne then IHC then E-B and finally Case T. M. Co. - - 7" no IHC logo variation. Excellent.
(3.) M555 (with a dot) / <M-H> - - 5.25" pitman wrench. Excellent. (R1-312)

0460. Unmarked (orphan) - - 10.5" heavy cast odd ball. Good++.

0461. BEMENT (E. Bement & Sons - Lansing, Mich.) - - 8.75". Good++. (R1-49)

PiCs Lots 455 thru 461

0462. Lot of 5 Parlin & Orendorff Co / IHC Wrenches
(1.) P & O CO - 4130 / CANTON ILL (Parlin & Orendorff Co / IHC) - - 8.75". Good+.
(2.) 2715 (P & O, later IHC) - - 9.5". All markings raised variation. Good++.
(3.) P & O CO - CANTON ILL / 4129 (later IHC) - - 10.25". Good+.
(4.) P & O CO - 4135 / CANTON ILL. (later IHC) - - 10.25". Light pitting.
(5.) 4359 (P & O - later IHC) - - 12.5". Good+.

0463. Lot of 5 IHC Wrenches
(1.) IH logo - 1-5/16" - 373941R2 - - 14.75" single12 point box end. Excellent.
(2.) P1189 / (Osborne - IHC) - - 14" with raised numbers. Excellent.
(3.) H3769M with IHC logo - - 16" offset hex box by open end. Good++.
(4.) 45662DA with IHC logo - - 12" offset double hex socket. IHC logo with 1' and 1-3/16" sockets variant. Good+.
(5.) >IHC logo - G3866 - - 14.25" heavy double open ended S-wrench with logo first variation. Good++.

PiCs Lots 462 thru 463

0464. UNIVERSAL (in cutout letters) (Ames Plow Co. - Boston & New York) - - 5" cutout. With NO part number variation. Good+. (R1-466)

0465. UNIVERSAL (in cutout letters) - E12 (Ames Plow Co. - Boston & New York) - - 5" cutout. With part number variation. Excellent. (R1-466)

0466. DD84 (American Harrow (Detroit, Mich. and Windsor, Ontario, Canada - - 3.75". Scarce wrench. Some pitting. (R2-11)

0467. Marked only with "P" (Bateman Mfg. Co. - Grenloch, NJ) - - 5.5". Used on the "Gem of The Garden Hand Cultivator: wrench. Good+. (R4-12)

0468. 303 (Huber Mfg. Co. - Marion, Ohio) - - 7." Huber Steam Engine wrench. Good++. (R2-134)

0469. N28 (American Harrow Co. - (Detroit, Mich. and Windsor, Ontario, Canada & American Harrow 0 Detroit, Mich.) - - 8". Rathbone attributes the N28 wrenches to both the American Harrow Co. and Frost & Wood. Good++. (R1-14, R2-11)

0470. Lot of 2
(1.) 4106 with a dot in a circle logo (Massey-Harris, earlier case Plow) - - 8" with hammer head. Good++. (R1-311)
(2.) H260 (Stoddard) - - 7". Excellent. (R2-270)

0471. 299 (Nichols & Sheppard, Battle Creek, Mich.) / "B" in a square logo)- - 9.5". Good+, light pitting. (R1-352)

PiCs Lots 464 thru 471

0472. LG276 with a Case eagle logo (Case T. M. Co. earlier Emerson-Brantingham) - - 6" by 9 Tee socket wrench. Excellent. (R1-82)

0473. 85 (orphan) - - 8" by 7" tee wrench with two square sockets and a round opening on one end, Excellent.

0474. KW (Belcher & Taylor? - Chicopee Falls, Mass.) - - 9.25" tee wrench. Similar looking CW, FW, GW, MW and SW wrenches may be related? Pitting. (R1-46)

0475. 479 (oddball orphan) - - 7.75" x 12" unusual tee wrench similar to Moline B355 and Madison Plow / Fuller & Johnson 2H. Good+, with slightly twisted shaft.

0476. M509 (orphan) - - 10.5" cast crank. Excellent.

0477. Marked only "L" (orphan) - - 6.5" by 11" tee handled square socket wrench. Pitting.

PiCs Lots 472 thru 477

0478. Lot of 2
(1.) C211 / M (Sechler & Kingman Plow Co.). Pitting. (R1-419, R1-284)
(2.) 12 (Gale Mfg. Co. - Albion, Mich.) - - 9.75". Good+, some pitting. (R2-109)

0479. K29 (La Crosse Plow Co. - La Crosse, Wisc.) / (ruler markings) - - 14.25". Square cutout version. Note: photo shows wrench with painted name, it's not marked "La Crosse Plow Co.". Excellent. (R1-289)

0480. XX5 (Gehl Bros Mfg. Co. - West Wind - Wisc.) - - 13.75". Excellent. (R2-112)

0481. 8141 (Reeves & Co. - Columbus, Ind.) - - 5.5" x 122.5" steam engine? tee wrench. Excellent. (R3-183)

0482. IRON KING (Bateman Mfg. - Grenloch, NJ) - - 5 ". No number variation. Good++ with casting flaw on "N" in King. (R1-261)

0483. AIM CO - A1 - - 8.75". Good++. ( R1-2 with no info)

0484. J7 <M-H> (Massey Harris) - - 6.5". Fair with pitting. (R1-312)

0485. WYETH / 9000 ST JOSEPH (Wyeth Hardware Co) - - 7" Deering style. fair with pitting. (R1-500)

0486. Unmarked (CUTOUT orphan) - - 8.5" fancy looking wrench with seven cutout sections and a circle. Good++.

PiCs Lots 478 thru 486

0487. "EAGLE" - FRANK MOSSBERG CO - ATTLEBORO, MASS. USA / PAT. SEPT. 1, 1891 - - 6" adjustable alligator wrench. Hard to find Mossberg wrench with the patent date variation. Patented by John Barden of East Providence, Rhode Island. Excellent. (S1088C) *PAT*

0488. GOWRIE AUTO & TRACTOR SHOP ( Paton, Iowa?) - - 5.5" promotional slip joint pliers. Excellent.

0489. Unmarked - - 6" center screw adjust nut wrench. Good+ . (no info found)

0490. J. H. WILLIAMS & CO - BROOKLYN, NY USA" - ALL DROP FORGED HARDENED ALL OVER FULLY WARRANTED (with a "W" in diamond logo.) / PAT'D SEPT 3, 89 - REIS'D OCT 18, 92 - - 5.5" double screw adjustable nut wrench. Patented by Henry Hammond of New Haven, Conn. Good with some pitting. (S424) *PAT*

0491. J. C. SPEIRS & CO. - WORCESTER, MASS. - DROP FORGED / PAT'D SEPT. 8, 1891 - U. B. & CO. - - 4.75" center screw adjust with open areas on both sides of the frame with unique imprint. Patented by Reinhard Torkelson of Hatfield, Mass. on 3-26-1895. Good+. (S106, C284) *PAT*

0492. THE ELGIN - PAT JUNE 8, 97 (on wrench shaft) - EXTRA JAW 25¢ (on upper jaw) - PAT'D 9, 06 (on die holder) - - 7" adjustable alligator wrench with threading die holder and die in the original canvas pouch with five dies. Patents were issued to Henry Smith of Elgin, IL and William Fred Frenk of Dundee, IL. Wrench and pouch are in Excellent condition. (S35) *PAT* and *PAT*

0493. Unmarked - - 9" unusual automotive type wrench with what looks like phenolic slab handles and a rotating jaw segment to convert between a nut or pipe wrench. Example has been seen marked "Amer. Autom. Dev's Co. - Pat. 4-24-26". April 24, 1926 is not a patent issue date and I can't find anything about the company. Good++. (not listed, no info found)

0494. Unmarked (Bornstein's patent) - - 5.5" all metal turn handle adjustable wrench with bulbous handle. Patented July 26, 1892 by Henry Bornstein of Boston, Mass. Note: there are several different marking variations of this wrench. Good+. (S1066). *PAT*

0495. SHELLY - - 5.75" center screw adjust with open side. . Good+.

0496. BEMIS & CALL, etc. / B & C logo- - 6.5" wood handled center shaft screw adjust monkey wrench with a knurled adjusting nut. Good with some pitting, cracked and worn wooden handle.

0497. THE LEADER - PAT. DEC. 3, 1895 - - 5" double screw, adjustable nut wrench. Probably made by Hardy & Carter of Boston, Mass. and patented by Carl Tinglof, same place. Good+ with a couple unreadable markings. (S99T) *PAT*

PiCs Lots 487 thru 497

0498. ROGERS COMBINATION WRENCH - SIZE 14 / DROP FORGED & HARDENED - PAT. PENDING - - 15" all metal self adjust wrench with removable reversible jaws and a pry bar end. First one I've seen. Excellent, like new. (not listed, no info found).

0499. Unmarked - - 17.5" blacksmith made wedge adjust nut wrench. Excellent.

0500. Large "S" over KERR logo - PAT. MAR. 15, 1921 - - 10" double open end S-wrench with two pivoting jaw inserts to accommodate different jaw sizes. Patented by David Clinton Kerr of Flint, Mich. First one we have had to list. Excellent. (S310, C188) *PAT*

0501. Unmarked - - 12" Taft's Railroad style wrench. Good++, handle has a tight crack.

0502. D.R. O. M. - - 12" lever adjusted rack type nut wrench. Excellent. (no info found)

0503. BOSTWICK'S STANDARD ROLLER PIPE WRENCH - PAT'D FEB 6, 1883 - - 11.5" wood handle screw adjust pipe wrench with a bottom roller jaw. Patented by Seymour Bostwick of Chelsea, Mass. Excellent. (S632) *PAT*

0504. KANAVEL WRENCH CO LTD - KILBUCK, OHIO / PAT FEB 1, 1916 - - 14" quick adjust rack type pipe wrench with a roller bottom jaw that according to the patent doubles as a fence stretcher. Patented by Lyman M. Kanavel of Killbuck, Ohio. Good+ with light pitting. (not listed) *PAT*

0505. McNAIR WRENCH - MEADVILLE, PA / PAT'D MAR. 21, 82 - NO 5 - - 17.5". Push a spring-loaded plunger to open the jaws which close automatically. Patented by Milton H. McNair of Meadville, Penn. Excellent. (S694) *PAT*

0506. Unmarked - - 14" shop made turn handle to adjust nut wrench. Excellent.

PiCs Lots 498 thru 506

0507. LAGRIPPER WRENCH CO. LTD - BATTLE CREEK, MICH / PAT JUNE 28, 1898 - - 13.25". Quick adjust rack wrench. Patent was issued to Carl F. Beach of Battle Creek, Mich. Excellent. (S688) *PAT*

0508. Unmarked (Chantrell's patent) - - 13.75" brace wrench with an adjustable socket wrench. Patented by Felix Chantrell of Bridgeport, Conn. on Sep. 04, 1883. Excellent. *PAT*>

0509. Unmarked (Wheeler's patent) - - 5.5" adjustable wrench attachment for a brace with buggy type jaws. Jaws were adjusted by turning a notches ring in several different positions. Patents were issued to Henry Wheeler of Dudenville, Missouri on Jan. 02, 1883 and June 19, 1883. First one we have had to list. Excellent. (C327) *PAT* and *PAT*

0510. Marked only PAT'D JUNE 16, 1896 (Coolidge's patent) - - 7" Quick adjust nut wrench attachment for a brace with buggy wrench type jaws. Patent was issued to Henry Coolidge of East Jaffrey, NH. and made by Henry A. Coolidge of East Jaffrey, NH and John W. Coolidge of Hancock, NH. Excellent with most of the original black Japan finish, weak markings as usual. (S882, C132, C17) *PAT*

0511. ERIE MFG. & SUPPLY CO. - ERIE, PA / PAT. SEP. 22, 91. - - 14" all metal pipe wrench with an unique adjustable lower jaw. Two patents were issue to George W. Johnson of Erie, Penn. that apply to this wrench: Sept. 22,. 1891 and Jun. 11, 1895. First one we have had to list. Excellent. (C129) *PAT* and *PAT*

0512. Unmarked (Porter's patent) - - 11.75". Early and rare rack and lever quick adjust nut wrench. Patented by Norton Porter of Youngstown, NY on Jan. 20, 1863. First one I have seen. Good++, no finish with an area of corrosion, adjusts smoothly. (C253) *PAT*

0513. RADIAL PATENT - - 15.25" all metal quick adjust pipe wrench with a lever operated, pivoting, curved upper jaw. Only second one we have had to list and that was a 10" example. Excellent. (not listed, no patent or info found)

PiCs Lots 507 thru 513

0514. X29 (orphan) - - 13.5" large hub type wrench. Excellent.

0515. PASCO - GENEVA N.Y (National Wire Wheel Works) - 037 - - 13" odd thin cast wire wheel hub wrench with extra large 3-1/2" hex box end. Excellent.

0516. THE McCUE CO.- 7X-9X (with a stylized "A") / 35023 - - 15.5" wire wheel hub wrench. Excellent

0517. MINUTE WHEEL / P5 (with a "T" in a triangle logo) - - 15.75" wire wheel wrench. Excellent.

0518. Budd Wheel Corporation - STRIKE - STRIKE / Philadelphia PA USA - 2956 - STRIKE - STRIKE - - 10.5" wire wheel wrench. Good++ with some hammer damage to the striking areas.

0519. PASCO (National Wire Wheel Works - - 5.5" small cast wire wheel spoke wrench. Excellent.

0520. TIMKEN ROLLER BEARING AXLE CO. / CANTON OHJIO - L728 - - 13" cast axle wrench. Excellent.

0521. MOFFETT VEHICLE BEARING CO - SAGINAW / A7 - - 14" cast double hex box. Moffett made bearings for wagons, early automobiles, etc. Good+ with overall light pitting.

0522. WIRE WHEEL CORP. OF AMERICA - BUFFALO N.Y. / B4-1005 - - 12" cast wire wheel wrench. Excellent.

0523. LUXOR WIRE / 13" wire wheel wrench. Excellent.

PiCs Lots 514 thru 523

0524. S O CO - 694 - -18.5" odd cast wrench with a square peg on the back side. (no info found)

0525. 391N (Advance Thresher Co., Battle Creek, Mich. later Advance-Rumely Co.) - - 18" steam engine wrench. Good+, some edge hammer damage.

0526. Marked only "B" (orphan) - - 10" by 17.5" Tee wrench with several round holes on the socket ends. Excellent.

0527. Marked only "C" (orphan) - - 10" by 17" Tee wrench with several round holes on the socket ends like Lot 526 above. Excellent.

0528. 1822C - U - with the Case eagle logo (Case Threshing Mach Co.) - - 20" Case steam engine wrench. Good+, some pitting.

0529. 4771 (Avery Co. - Peoria, Illinois) - - 16.25"" Double socket Excellent. (R2-18)

PiCs Lots 524 thru 529

0530. MADE IN USA / Markings not readable - - 29.75". Advertised as a "Ford Double End Valve Lifter: for Ford 84 and 60 series. Good++.

0531. M A CO OMAHA (Martin-Anderson Co) - - 10" Rare Nebraska wrench. Good++. (R1-303)

0532. 13295X (orphan) - 12" odd ball extended socket with an open and hex box openings. Good+ with light pitting, no patina.

0533. HINCKLEY-MYERS J602 - - 21" odd ball with offset double box ends. Hinckley-Myers of Jackson, Michigan made service tools for early Oakland, Pontiac and other General Motor Automobiles as well as other specialty tools. Later became a division of Kent-Moore. Excellent.

0534. R456 (Walter A. Wood, Hoosick Falls, NY) - - 8.5" doe with key hole shaped cutout. Excellent. (R1-494)

0535. NE258 (Stoddard Mfg. Co. - Dayton, Ohio) - - 8". Fair with pitting. (R1-441)

0536. Unmarked (orphan) - - 24.5" with a thick cast head and flat steel handle. Good+ with some edge chips.

PiCs Lots 530 thru 536

0537. GRIPNAIL - - 12.5" cast hammer with two magnets in hammer face. Excellent.

0538. Unmarked - - 11.5" rare odd hammer with a nail holder. Patented Mar. 12, 1817 by George Selsor - Philadelphia, Penn. Some pitting. *PAT*

0539. HELLER (with a horse logo) - - 13" claw hammer. Good++.

0540. B-R MFG CO (Beckley-Ralston Co). - CHICAG0, ILL - PAT' APPLIED - -10" box or crate hammer. Excellent with most of the original plating.

0541. GENUINE PLUMB - - 13" straight claw hammer. Good++.

0542. L. S. MFG. CO. / STEEL - - 9" cast all metal box or crate hammer. Light pitting, repainted.

0543. Unmarked - - 12.5" all metal hammer with a different rod and chain handle. Shop made? Excellent.

0544. GILLETS NOVELTY BLUING / PAT. APL. 25 '82 - - 8" cast tack hammer. Hammer was actually sold as a package for the bluing with a package inside the hollow handle. Patented by Egbert W. Gillett of Chicago, Illinois. Excellent. *PAT* - - Trade Card Advertising a Hammer and Stove Lifter Sold with Novelty Bluing Inside the Handles PiC and PiC

0545. Lot of 2
(1.) Unmarked - - 9,75" all metal blacksmith shop made horse hoof snow knocker hammer. Crude
(2.) Unmarked - - 8.5" all metal hammer with a nail puller. Pitting.

PiCs Lots 537 thru 545

0546. SIMPLEX / 121 (may be Simplex Barn Equipment made by F. Rassman Mfg. Co. - Beaver Dam. Wisc.) - - 10.75" cast step. Good++.

0547. STANDARD - EMERSON MAN'FG. CO. - ROCKFORD, ILL. USA - - 17" cast mower gear box cover? Excellent.

0548. Unmarked - - 14" blacksmith shop made "pig tail". Used when lowering or lifting any type of container with a bail, etc.

0549. EMERSON=BRANTINGHAM - MFG. CO. - ROCKFORD, ILL. USA / P482 - - 6.75" cast planter box lid. Excellent.

0550. Unmarked (orphan) - - 10". Large cast clevis and wench pin. Clevis is Good++, pin is pitted.

PiCs Lots 546 thru 550

0551. BLACKHAWK - - 9" tin planter box lid. Not cleaned.

0552. P20 - C B & Q PLANTER with large IHC logo - P19 with small IHC logo (Chambers, Bering, Quinlan Co. - Decatur, Illinois / IHC) - - 9.25" cast planter lid. Excellent, not cleaned.

0553. DEMPSTER 50 - - 9.75" tin planter lid. Excellent.

0554. ROCK ISLAND PLOW CO. / Y607 - TO GET THE BEST RESULTS USE POPER SIZE SEED RING AND CAREFULLY SELECTED CORN - - 8" cast planter lid. Excellent.

0555. EVERWEAR - J25 - - 17" cast name plate? with large cutout letters. Rusty, not cleaned.

0556. THE JANESVILLE - DC1 (Janesville Machine Co. - Janesville, Wisc.) - - 19" cast name plate with large cutout letters. Rusty, not cleaned.

PiCs Lots 551 thru 556

0557. 1684 (Huber Mfg. Co. - Marion, Ohio) - - 27.5" cast threshing machine cylinder tooth wrench and straightener. Excellent.

0558. Can't read part number - - 27" heavy cast threshing machine cylinder tooth wrench and straightener. Pitted.

0559. 288 (orphan) - - 29" cast threshing machine cylinder tooth wrench and straightener and a cylinder tooth. Good.

0560. Unmarked (orphan) - - 23.25" flat steel threshing machine cylinder tooth wrench and straightener. Excellent.

0561. SS628 (Avery Co. - Peoria, Ill.) - - 20.5" cylinder tooth straightener and wrench handle. Good+. (R2-18)

0562. Unmarked (orphan) - - 21" cast threshing machine cylinder tooth wrench and straightener. Ribbed shaft is twisted.

PiCs Lots 557 thru 562

0563. PAT. NO. 1318176 PAT. OCT. 7 1919 NO. 1 - - 32" threshing machine cylinder tooth wrench with a flexible joint socket. Patented by Michael Quint and Peter Miller Quint of Hays, Kans. Excellent. *PAT*

0564. Unmarked (orphan, may be Aultman-Taylor?) - - 33.5". Excellent.

0565. Unmarked (IHC 11564N or 11564NA?) - - 25.5" threshing machine cylinder tooth wrench with loop end. Good++.

0566. T1690 (Sawyer & Massey) - - 28" threshing machine cylinder tooth wrench. (Rathbone lists in Supplement, no illustration). Excellent.

0567. Unmarked (IHC 11564NB?) - - 24" threshing machine cylinder tooth wrench and straightener. Good++.

0568. Unmarked (Twin City No. AH9093 or C8693?) - -24.75" threshing machine cylinder tooth wrench. Excellent.

PiCs Lots 563 thru 568

0569. 2302B (Frick & Co. - Waynesboro, Penn.) - - 24" threshing machine cylinder tooth straightener. Excellent.

0570. 1600 (Wood Bros. Thresher Co. - Des Moines, Iowa.) - - 25." threshing machine cylinder tooth wrench and straightener. Excellent.

0571. TO177 (Massey-Harris) - - 24" cast threshing machine cylinder tooth straightener.

0572. 805 (orphan) - - 19.25" odd cast cylinder tooth straightener and open end wrench. Good++.

0573. 95N - IHC logo - - 23.25" cast threshing machine tooth wrench and straightener. IHC logo variation. Excellent

0574. 223T - 224T (Advance Rumely) - 25" cast threshing machine cylinder tooth wrench. Excellent. (R1-405)

PiCs Lots 569 thru 574

0575. E. R. KEYS - DOVER, MINN. - PAT. APR. 17, 94 - - 21" heavy cast threshing machine cylinder tooth wrench and straightener. Patented by Edward W. Oakey of Chatfield, Minn. Rare tool, first we have had to offer. Good++. *PAT*

0576. Unmarked (Tatge's patent) - - 20" threshing machine cylinder tooth ratchet wrench. Patent No. 856498 was granted on Jun. 11, 1907 to George H. Tatge of Randolph, Neb. Made by the Lightning Cylinder Wrench Co. of Lincoln, Neb. and advertised by the Port Huron Machinery and Supply Co. (of Lincoln, Neb.) as the "Lincoln Cylinder Tooth Wrench". Excellent. *PAT*

0577. LUNDS PATENT / FOSSTON CARPENTER CO. - ST. PAUL, MINN. - - 20" threshing machine cylinder tooth ratchet wrench. Patented by Henry Lund of Grafton, North Dakota on March 6, 1900. Excellent. (R1-181) *PAT*

0578. 177 (Avery Co. - Peoria, ILL) - - 21" heavy cast threshing machine cylinder tooth straightener. Excellent. (R2-18)

0579. TIGER - PAT. MAR. 8, 1904 - - 17" threshing machine cylinder tooth ratchet wrench with the tooth straightener handle. Patent granted to William R. Johnson of Freeport, Illinois. Excellent. (S45, R1-455) *PAT*

PiCs Lots 575 thru 579

0580. Unmarked (The Success Cylinder Wrench) - - 15" tee handled ratcheting cylinder tooth wrench. Patented was issued to Charles E. Greenlief of Newton, Iowa on Oct. 14, 1902 and was made by the Parsons Band & Self Feeder Co, (Newton, Iowa) and later by the Maytag Co. (Newton, Iowa). Excellent. (S44, R1-317, R1-318) *PAT*

0581. TIGER (Johnson's patent) - - 17" threshing machine cylinder tooth ratchet wrench. with the plain handle not with the tooth straightener handle and not marked with patent date rare variation. Patent granted to William R. Johnson of Freeport, Illinois on March 8, 1904 - Excellent. (S45, R1-455) *PAT*

0582. 3271 (Gaar, Scott & Co. - Richmond, Ind. later M. Rumely) - - 15.75" cast double offset open ended threshing machine cylinder tooth wrench. Excellent. (R2-107)

0583. M451D with IHC logo - - 18.25" threshing machine cylinder wrench and straightener. Good++. (R1-254)

0584. 733A (Caterpillar?) - - 19" single hex box end. Good+ with light pitting or casting roughness, (Rathbone lists as a Caterpillar number but no illustration)

0585. Unmarked - - 14" unusual threshing machine cylinder tooth wrench and straightener. Good+.

PiCs Lots 580 thru 585

0586. THE IMPROVED BOSS PAT' OCT 29-01 / MFD BY J.P. JOHNSON STORDEN MINN. - - 18.75" with 1-1/8" and 1-3/8" square sockets. Patented by John P. Johnson of Storden, Minn. Excellent. *PAT*

0587. E50 (orphan or Aultman & Taylor?) - - 11.5" extension socket with male square by female hex. May be an Aultman & Taylor wrench as it was found with other known Aultman & Taylor wrenches. Excellent.

0588. C B :Q-E (Chambers, Bering, Quinlan Co. - Decatur, Illinois, also IHC or Chicago, Burlington and Quincy Railroad) - - 15.5". Excellent.

0589. 1B5175 T (Caterpillar) - - 7.5" Drain plug wrench. Excellent (R3-43)

0590. 237 (A. C. Evans - Springfield, Ohio) - - 15" thin cast double open ended. Good++.(R4-75)

0591. U348 (Allis Chalmers) - - 11" heavy hub wrench. Also found marked "FM". Excellent. (R1-11)

0592. SUPER MOGUL SUPER SPECIAL / M350 USE FOR AXLE NUTS ONLY (Standard Ditching Machine. Louis, MO.) - - 15.25". Excellent. (R1-436)

0593. W4 - H. P. M. CO. / STAR (Hist Potato Machine Co. - Barberton, Ohio) - - 9". Good++. (R3-99)

0594. 24792 (Aultman & Taylor?? - Mansfield, Ohio) - - 8.5" by 10.5" "L" shaped hex socket wrench. May be a Aultman & Taylor Wrench as 2791 is a know Aultman & wrench number and it was found with other known Aultman & Taylor wrenches. Excellent.

0595. 139M (Minneapolis Threshing Machine Co.) - - 7" Steam Engine set screw wrench. Excellent. (R2-204)

0596. Unmarked (look like Allis-Chalmers No. 213482 wrench?) - - 6" by 14" "L" hex socket wrench. Excellent with some of the original paint.

PiCs Lots 586 thru 596

0597. ACME HAR. CO. - T61 (Acme Harvester Co.) - - 17" cast tool box with oil can holder. Excellent.

0598. COLLINS In cutout letters (Collins Plow Co. - Quincy, Illinois?) - - 11" cast tool box. Some pitting.

0599. Unmarked - - 14.25" cast tool box with oval and round cutouts.

0600. A171 - - 4" diameter cast oil can holder.

0601. WHITEWATER WIS. / M87 - - 17" cast tool box with an oil can holder. Excellent, not cleaned.

0602. HAPGOOD with cutout letters (Hapgood Plow Company - Alton, Illinois) - - 12.75" cast tool box. Excellent.

0603. Marked 604 (Emerson) - - 16.5" unusual neat looking cast iron tool box and oil can holder.

PiCs Lots 597 thru 603

0604. Unmarked - - 10.5" cast tool box.

0605. Unmarked - - 14" cast tool box with cutouts. Some pitting.

0606. 989 - - 13.25" cast tool box.

0607. Unmarked - - 9.75" cast tool box.

0608. THE B-I-W - BEATRICE IRON WORKS, BEATRICE, NEBRASKA - - 10" cast tool box. Good++.

0609. Unmarked - - 11.75" cast tool box with numerous slotted cutouts.

PiCs Lots 604 thru 609

0610. LEVER WRENCH - U.S, PAT.2,751,801 - 3,116,656 - OTHERS PENDING / LEVERAGE TOOL INC. - GLENVIL, NEB - USA - - 9.75" locking pliers, Later sold by Stanley Tool Corp. as the Stanley Auto-Grip Pliers. Excellent. (S273) *PAT*

0611. TITE-SPOT / PATENT NO. 3413877 OTHER PATENTS APPLIED FOR. MFG. BY GARNER TOOL CO. LINCOLN, NEB. 68504 - - 9" lever operated ratchet wrench. Patented by Franklin J. Teichmeier of Ravenna, Neb. on Dec. 03, 1968. Excellent, like new. *PAT*

0612. VISE-GRIP - DeWITT, NEBR. - U.S.A. - PAT. NO. 1,489,458 - - 9" Early transitional pressed steel with hex adjusting bolt and release lever. Excellent. *PAT*

0613. 10 - MID AMERICA INC. - EAGLE GRIP - PATENT NO. 2691317 - OMAHA, NEBR. - 10" FORGED STEEL - - 9.75" Stillson type pipe wrench with a novel jaw tightening lever. Patent was issued to Ernest T. Olson of Oshkosh, Nebraska on 10-12-1954. Excellent with plated finish. (S598) *PAT*

0614. PAT. APL'D FOR - - 12" Rare large size early example of the Shark Pliers with wire cutter, nail claw and a screwdriver . Made by the Wakefield Mfg. Co .of Wakefield, Neb. Patented by Anton G. Carlson of Sholes, Neb. Good++. (S259) *PAT*

0615. PAGOMA . OMAHA - - 6.25" hog ring pliers sold by the hardware wholesaler Paxton and Gallagher of Omaha, Neb. Excellent.

0616. COLLISON-WRIGHT "S" WRENCH - MFD. BY PARROT MFD. CO. FREMONT, NEB. - PAT'D. DEC. 5, 1911 - 9". Rare wrench with the first patent date and Parrot Mfg. of Fremont, Neb. markings. Patented was granted to John S. Collison and William A. Wright both of Ord, Nebraska. First one we have had to offer. Good+. *PAT*

0617. COLLISON "S" WRENCH - COLLISON MFG. CO., BRUNING, NEBR - PAT. MAY 29, 1946. - - 8.5" locking pliers with tightening lever. Patented by John S. Collison of Campbell, Nebraska on Dec. 12, 1950 (the May 29, 1946 date on the wrench is the application date). Excellent. (S309) *PAT*

0618. COLLISON-WRIGHT "S" WRENCH - ORD MFG. CO., ORD, NEBR - PAT. DEC 5, 1911. - - 8.75" adjustable pliers with tightening lever. Patented by John S. Collison and William A. Wright both of Ord, Nebraska. Good++ . (S309) *PAT*

PiCs Lots 610 thru 618

0619. FREEMAN'S PIPE WRENCH - PAT'D JUNE 23, 1896 - NO. 2 - - 20" lever adjusted pipe wrench. turnbuckle type adjustment variant. Patent was granted to Alson W. Freeman of Fullerton, Neb. Good++ with jaw lip chip. *PAT*

0620. PAT'D JUNE 23, 1896 - NO. 1 - - 11" lever adjusted pipe wrench. Rod type adjustment variant. Same Freeman patent info as Lot 620 above. Excellent. *PAT*

0621. MANUF'D BY JOHN DUDEK - LINCOLN, NEB - PAT'D MAR. 21, 1922 - - 6" unusual strap type jar opener. Patent No. 1,410,390 was granted to John Dudek of Lincoln, Neb. Excellent.

0622. NEBRASKA BLAMGAS CO. - - 9.5" cast single open ended wrench. Some pitting. (no info found on the Blamgas Co.)

0623. PAGOMA SHIELD OF QUALITY (in a shield logo) - - 12" Coes type wood knife handled monkey wrench. Pagoma was a trademark for hardware wholesaler Paxton and Gallagher of Omaha, Neb. Good+, minor jaw edge damage.

0624. FLEISCHER MFG. INC. - COLUMBUS, NEB. - PAST PEND - AC-110-1 - - 4.5" different type two piece chain breaker. Excellent.

0625. F. D. KEES MFG. CO. - PTEN TED - BEATRICE, NEBR. USA - - 5.5" calf weaner .Excellent.

PiCs Lots 619 thru 625

0627. Unmarked - - 15" pump type oil can with copper spout. Good+.

0628. FAIRBANKS MORSE & CO. - CAUTION DO NOT USE GASOLINE - - 12.75" steel and brass blow torch with wooden handle and pump knob. Good, not cleaned.

0629. THE HOWLAND OILER - PATD JUL. 23, 1901 - NOV. 7, 1905 - MANF'D BY - MAPLE CITY MFG. CO. - MONMOUTH, ILL. - - 17.75" copper coated oil can. Patents not found but a catalog listing states patent was for the location of the spout on the edge of the can allowing for more oil drained from the can. Good+, some corrosion.

0630. HG156 - IH OILER - 10 OZ CAPACITY - MANUFACTURED FOR INTERNATIONAL HARVESTER COMPANY, Etc. - EAGLE - MADE IN USA - - 10" pump type oiler. Can has very minor dents, paint has worn spots.

0631. LIDSEEN'S POSITIVE FORCE FEED OILER - CHICAGO, ILL. - PATENTS APPLED FOR - TRADE ("G" & "L" LOGO) MARK - Bottom marked GUSTAVE LIDSEEN PATENTEE & M'N'F'R' - CHICAGO, ILL - - 11.5" pump type oil can. Excellent.

0632. BUHL (in script) - NOERA MFG. CO. WATERBURY, CONN. - PATENTED APRIL 14, 1908 - PATENTS P'D'G - - 5.25" oil can. Patent (No. 884,761) for a can spout was issued to George J. Richard of Waterbury, Conn. and assigned to Nora Mfg. Co. Same can as been seen marked "Ford". Good+. good+.

0633. Unmarked - - 8.5" oil can with odd wire handle. Steel with brass fitting. Good+.

0634. "REV-O-NOC - CHICAGO" - - 9.5" oil can with copper bottom. Rev-O-Noc (Conover spelled backwards) is the a trademark of the (Hibbard, Spencer, Bartlett & Co. Good+.

0635. GEM OILER - GEM MFG. CO. - PITTSBURGH - - 10' oil can - - Good+.

0636. JOHN DEERE with two legged deer logo - EAGLE - MADE IN USA (John Deere No. JD72)- - 10" Yellow pump type oil can with vertical spout. Can has minor dents, yellow paint has worn spots.

0637. AMERICAN CHAIN & CABLE CO. - YORK, PA. USA - ACCO MORROW LUBRICATOR - - 11" oil can with pump on the bottom of the can and brass spout. Good++.

PiCs Lots 626 thru 637

0638. Lot of 4 scythe snath wrenches (a snath is the part of a scythe that fastens the blade to the handle - - 3.75" to 4". All with no markings.

0639. Lot of 4 scythe snath wrenches - -2.75" to 3.75". All are marked:"22" with an iron cross logo, "21", "M" and "15A".

0640. Lot of 4 scythe snath wrenches - - 3" to 3.75". Three with no markings and one is marked "21".

0641. Lot of 4 scythe snath wrenches - - 2.75" to 4". three are marked "22" with an iron cross logo, "3" and "M".

0642. Lot of 6 garden cultivator, lawn mower, etc. small wrenches
(1.) 1893 (Dille & McGuire, Richmond, Indiana) - - 3.75".
(2.) P52 (Whitman & Barnes Garden Cultivator) - - 4.25"
(3.) K4 (Dille & McGuire, Richmond, Indiana) - - 4.5"
(4.) M23 (orphan) - - 6" garden cultivator type.
(5.) N9 (orphan) - - 5.75".
(6.) A16 (New Departure?) - - 5.5" bicycle wrench for coaster brakes?

PiCs Lots 638 thru 642

0643. Lot of 5 Delco-Light - Dayton, Ohio Wrenches - - 7" to 8.25". (R3-64)
(1.) SPARK PLUG - GEN. NUT - 90257 / CYLINDER STUD - BATTERY NUT
(2.) CONN. ROD NUT - 90258 / CYL. HEAD - COVER PLATE
(3.) CONN. ROD NUT - 90559 / CYL. HEAD SCREW
(4.) CONN. ROD NUT - 90569 / CYL. HEAD SCREW
(5.) CONNECTING ROD SCREW - 6 / CYLINDER NUT 95095

0644. Lot of 4 Emerson Type Wrenches
(1.) E. T. (Emerson Talcott - Rockford, Illinois) (R1-164)
(2.) EMERSON (Emerson-Brantingham - Rockford, Illinois (R1-162)
(3.) EMERSON (Emerson-Brantingham - Rockford, Illinois (R1-162)
(4.) P & O CO / 5283 (Parlin & Orendorff Co. - Canton, ILL. / later IHC)

0645. Lot of 5 Farmer's "S" Type Wrenches - - 9" to 10.5". One marked 340. Two are badly pitted.

PiCs Lots 643 thru 645

0646. B196 - 9" cast iron check row planter marker with a 20" chain. (listed in Lofdahl's IHC Tool List)

0647. Unmarked - - (IHC?) - - 12.75" crank extension. Good+.

0648. INTERNATIONAL HARVESTER 995225R1 - - 17" brass 1.5 quart pump type fire extinguisher with holding bracket. (listed in Lofdahl's IHC Tool List) Good++.

0649. Lot of 2 - Two sizes of the IHC S110 wrench.
(1.) S110 - IHC logo - - 4.25" by 6.25: tee handled socket wrench
(2.) S110 - IHC logo - - 4.25" by 4.75: tee handled socket wrench

0650. IHC logo on ring, gauges marked: BREAKER POINTS and SPARK PLUG GAP (IHC No. 21438DX) - - 1.25" diameter. Ignition gauge with brass gauges. Excellent.

0651. IHC logo - 1599E - - 9.25 " face spanner. Scarce IHC wrench. Excellent.

0652. B701 - IHC logo - - 8.25" cast binder canvas tightener. Good+. (listed in Lofdahl's IHC Tool List).

0653. Only marked with IHC logo (IHC H758M? or H758?) - - 1/2" by 5.5" cold chisel with hex shaft. Good+.

0654. G8917 - IHC logo - - 4.25". For early IHC Gas Engines.

0655. Lot of 2
(1.) P & O)(Parlin & Orendorff Co / IHC) - - 13.5" double open ended wrench. May be a wrench used at the P & O factory. Good+. (I couldn't find this wrench listed in Lofdahl's IHC Tool List)
(2.) SA2127 (IHC) - - 8.75" flat steel. Pitting.

0656. Lot of 2
(1.) 887Z - IHC logo / Z786 - - 8 all metal screw adjust nut wrench. Ribbed nut variation. Marking variation not on Lofdahl's list.Excellent
(2.) Z786 - Z788 / IHC logo. 8" like above. Excellent.

PiCs Lots 646 thru 656

0657. Lot of 16 IHC wrenches.

PiCs Lot 657

0658. U. S. PAT. 3412597 - 3230751 (John Deere) - - 7" riveting tool. Patents were issued to Gilbert Rains of Hutchinson, Kans. on Nov. 26, 1968 and Lloyd Smith of Newton, Kans. on Jan. 25, 1966. Excellent with original green paint, John Deere label is missing. (DC599) *PAT* - and - *PAT*

0659. 4428C (Marseilles / Deere) - - 7" by 8.5" tee handled socket wrench for Marseilles Corn Shellers. Good+ with light pitting. (DC102)

0660. S2582D / JD logo -- 2.25" diameter cast hubcap.

0661. JD-2403 (with a "JD" logo - - 4" diameter cast hubcap.

0662. A523 (Deere Mansur) - - 6". Marked on one side variant. Excellent. (DC179)

0663. 110 - 1 (orphan) - - 8.25 " buggy wrench with 1-1/8" sq opening. To the best of my knowledge this wrench is not a Deere wrench. The rare Deere buggy wrench is marked "M110". Excellent.

0664. Marked only "C" (Deere / Kemp-Burpee) - - 5" socket for the "A" wrench. Excellent. (DC276)

0665. Marked only "B" (Deere / Kemp-Burpee) - - 5.75" socket. Good++. (DC239)

PiCs Lots 658 thru 665

0666. John Deere 3/4" Ratchet and Socket Set. Includes a 18" ratchet No. TY3205, a 19" breaker bar No. TY3206, a 8" extension No. TY3203, a 16" extension No. TY3204 and eleven 3/4" drive sockets: 15/16"- TY3207, 1" - TY3208, 1-1/6" -TY3209, 1-1/8" - TY3210, 1-1/4" - TY3211, 1-5/15 - TY3379, 1-3/8 - TY3212, 1-7/16" - 3213, 1-1/2 - TY3214, 1-5/8" - TY3215, 1-3/4" - TY3216,. and a metal tool box with a John Deere with Deere logo name plate. Tools are in excellent working condition and show some finish wear, tool box has some dents, no tray.

PiCs Lot 666

0667. Unmarked - - 8" Rigid type wrench. Brass colored, probably made of Beryllium. Excellent

0668. Unmarked - - 11.5" brass, large oddball wrench. Excellent.

0669. Unmarked - - 7.25" oddball brass wrench. Large openings for such a short wrench. Good++ with minor edged dings.

0670. Unmarked - - 8.5" brass colored odd ball wrench. Probably made of Beryllium. Excellent.

0671. AMPCO (in a diamond logo) W1147 - - 12" Beryllium nut wrench. $424.00 new price. Good++ with a few very minor dings. List price is $259.00.

0672. Unmarked - - 7.25" older brass wrench with six openings. Excellent.

0673. Marked only PAT. PEND. - - 8.5" brass tool that looks similar to a Star Tool Co. tool used for repairing Ford Model "T" brake bands. Excellent.

0674. DE NEUI - PAT. 1931576 - - 7" brass hog ringer. Patented Oct. 24, 1933 by Dickie De Neui of Grundy County, Iowa. Excellent. *PAT*

0675. 'S HOG TONG - - 14" brass hog holder. Why brass? Excellent.

PiCs Lots 667 thru 675

0676. FULTON RIM TOOL - PATD' JAN. 1924 / MFGD. BY THE FULTON CO. - MILWAUKEE USA - - 14" TIRE TOOL with a hammer. Patent No. 1,479,741 was issued on Jan. 1, 1924 to Harry Reita of Ames Oklahoma. Good++. *PAT*

0677. JOHNSON TIRE TOOL - PAT. APPLIED FOR / DROP FORGED STEEL - - 12" tire tool with a hammer. Patented by Anders Gustav Johnson, of Chicago, Illinois ON Dec. 29, 1914. *PAT*

0678. THE BISHMAN CO. - UNIVERSAL HUB CAP WRENCH - MPLS MINN - PAT PEND. - - 15.25" adjustable hubcap wrench fits all hexagon and octagon hubcaps plus several requiring a special wrench such as Packards, Whippets, Willys, etc. Patent was issued to Walter A. Bishman and Harold G. Lien both of Minneapolis, Minn. A British patent for this tool was also issued to Thomas Kennedy of Birmingham, England. Excellent. (Geessin-111) *PAT*

0679. B2208 F (orphan) - - 10.5" heavy cast hub? wrench. Good+ with old grind grooves on one end.

0680. B507 (orphan) - - 17" with one large octagon and two hex openings. Excellent.

0681. M-H-17017 (Lincoln) - - 9.5" double hex. Listed as a Massey-Harris in Rathbone but later found in Lincoln Zephyr parts books. Excellent.

0682. KING (the King Motor Car Company in Detroit, Michigan? - - 7.5". Excellent.

PiCs Lots 676 thru 682

0683. L5893(Lincoln Motor Co.?) - - 10.25" cast hub cap and wheel bearing wrench. Good++.

0684. Lot of 2 White Motor Company Wrenches
(1.) WHITE - 886-0 - - 11.25". Excellent.
(2.) 21714 / X - - 12.5". Excellent.

0685. AUTO / W & B in a diamond (Whitman & Barnes logo) - - 10.25" Coes type all metal monkey wrench, thinner than normal monkey wrenches. Good++ with former owner's stamped initials "OJ".

0686. Lot of 2 TUNGSTEN SPARK PLUG / ALWAYS ON THE JOB - - 6.75" and 7" with different size hex openings. Small one has 15/16" and 1-1/16", larger one has 1-1/16" and 1-1/4" openings. Both are in excellent condition.

0687. THOR 284 - - 5.75" open end by tapered square. Thor Motorcycle wrench? There is also a smaller wrench marked "THOR 3-6-10". Excellent.

0688. AMERICAN BICYCLE FACTORY - SYRACUSE FACTORY - - 5.5" with three openings and a spanner. Good++.

0689. E. M. F. CO - DETROIT / A-1301-01 (Everitt-Metzger-Flander - later Studebaker) - - 4" small double open end S-type wrench. Excellent.

PiCs Lots 683 thru 689

0690. T. Mills & BRO. INC. PHILA. PA. - - 13". Advertised as a "stick candy chopper".

0691. BUCK'S - - 10" stove ash shaker handle and lid lifter. Excellent with plated finish.

0692. Marked only: SPARK PLUG GAP GAGE .O32 (Scott-Atwater Outboard Motor Co. - Minneapolis, Minn.) - - 6" combination tool for outboard boat motors with several wrench openings, screwdriver, feeler gauge, and compartment for holding sheer pins. Two shear pins and a small cotter pin in the compartment. Excellent.

0693. Unmarked - - 15" What's It. A nice one. Excellent with original nickel plating. Note: I have been told this is a horse hoof tester.

0694. 0871. VOSS MFG. & DIST. CO. - DOWNS KANS / CS-1 - CS-2 UNIVERSAL - - 10.5" cast clamp or holder? This tool has been the subject of several "What's It" sessions but hasn't been identified. Excellent.

0695. GROVER - - 11" piano tuning hammer wrench. Excellent, like new with wooden handle and plated finish.

0696. PAT APD FOR - - 9" tee handled grease cup wrench. Excellent, like new with plated finish.

0697. Unmarked - - 6" grain bundle band cutter. Excellent.

PiCs Lots 690 thru 697

0698. B748 / B749 (Stoddard Mfg. Co. - Dayton, Ohio) - - 7.25" check row pliers. Good++. (Not in Rathbone's books, ID from parts book)

0699. Lot of 4
(1.) R43 (Ruth Self Feeder Co - Halstead, KS later Parsons Self Feeder Co.- Newton, IA later Maytag Co. - Newton, IA) - - 6.75". Also shown in M. Rumely Co. Threshing Machine Parts Lists. Good++. (R1-405)
(2.) FULLERTON (Fullerton, Nebraska?)- - 5.75" cast aluminum crude doe wench. Shop made?
(3.) S852 (Acme Harvesting Co. - Peoria, Illinois) - - 6" by 8" tee socket wrench. Good++. (R1-4)
(4.) 97 (Albert H. Sears Mfg. Works - Plano, Illinois) - - 8.5" cast wrench with small hammer head. Excellent. (R4-223)

0700. Unmarked - - 6" cast grain bundle band cuter. Good++, handle spring is missing.

0701. Unmarked - - 8" cast grain bundle wire band cutters. Similar cutter as been seen marked "Hale's Pat. Mar. 5, 1878". The patent for an "Improvement in Wire-Band Cutters" was issued to Robert Hale of Minneapolis, Minnesota. Band cutters were used to cut the wire bands on bundles of wheat, etc. before they were fed to the threshing machine. Excellent. *PAT*

0702. Lot of 3
(1.) 2 - 114 (orphan) - - 10.5". Excellent.
(2.) 884C (Case T. M. Co.) - - 9.25" doe for Case Steam Engines. Pitted. (R1-81)
(3.) 4106 with a dot in a circle logo (Massey-Harris, earlier case Plow) - - 8" with hammer head. Excellent. (R1-311)

0703. BONNEY - BATTERY TERMINAL AND GREASE CUP PLIERS - PAT. FEB. 24, 1920 - - 8.75". Design patent was issued to John Edward Durham, Jr. of Allentown, Penn. and assigned to Bonney Vise & Tool Works. Good+. *PAT*

0704. E51A - - 8.5" cast whip holder. Some pitting.

PiCs Lots 698 thru 704

0705. Pat. Feb. 8, 1916 (Chroninger's patent) - - 6" pitman spreader wrench. Patented by Jerry F. Chroninger of Delphos, Kansas (Pat. No. 1171320). Also found marked "PSW" reverse side. Good++. (R1-103) *PAT*

0706. Lot of 2
(1.) HAR' KING CO - X (same markings both sides) (Harvest King Co. - Harvey, Illinois) - - 5". Excellent. (R1-225)
(2.) MANN BONE CUTTER (F. W. Mann Co. - Milford, Mass.) - - 4.75". Excellent. (R1-308)

0707. Lot of 2
(1.) ALFA-LAVAL / 1317 - 166 - - 10.75" double hook spanner. Excellent. (not listed)
(2.) WR (Ohio Cultivator - Bellevue, Ohio) - - 8.5". Pitted. (R1-357)

0708. J. S. H. & CO. / UTILITY (Janney, Semple, and Co. - Minneapolis, Minn.) - - 7.25" Deering Type. Good++. (R2-148)

0709. 4780 (orphan) / ""W" in a circle logo) - - 6.25" x 11" odd tee socket wrench. Good with pitting.

0710. RP209 (Oliver / IHC) - 11.75". Good++. (R1-361)

0711. Lot of 3
(1.) 7370 -- (Empire Plow Co. - Cleveland, Ohio) - - 6.5". Marking variation without a dash after the part number. Excellent. (R1-166)
(2.) 123 (David Bradley?) - - 6.75". Markings parallel to the wrench sides. 123 is a David Bradley number but I don't think it is this wrench. Good+. (R2-73)
(3.) 7RT (Rude Bros - Liberty, Ind.) - - 7" with hammer head. Markings are parallel to edged of the wrench. There are several marking variations of this wrench. Good++. (R2-252)

PiCs Lots 705 thru 711

0712. SECURITY STOVE & MFG CO - KC / USE TO HOLD KETTLE UNDER FAUCET - - 4" promotional cast kettle holder. Excellent.

0713. Lot of 2 blacksmith shop made horse hoof cleaning tools - - 6.5" and 10.5".

0714. Unmarked - - 7" rope making machine tool. Original in excellent condition.

0715. Lot of 2
(1.) BUCK'S / F37 (Buck's stoves?) - - 6.25" heavy cast handle? Excellent.
(2.) PAT'D OCT. 19, 69 - - 8.25" Early patented fancy cast tee handle square socket wrench. Patent for a wrench for pavement cleaner valves with a handle designed to hold a hose when draining. Patent was issued to William H. Johnson of Philadelphia, Penn. Excellent.

0716. Unmarked - - 8.5" hammer and pliers type tool with an adjustable flange under the plier jaws. Probably a shoe lasting or leather working tool? Good++.

0717. M. B. H. CO LX- PAT. APPL'D FOR - - 8.5" pliers type tool advertised as "The LX Combination Belt Cuter" - "Three Tools in One - Cutter, Awl, and Pliers". Good++ but spring shown in ad is missing.

0718. 1682 / 1683 (Madison Plow Co. / Fuller & Johnson) - - 7.25" cast check row corn planter pliers. Excellent.

0719. R43 (Ruth Self Feeder Co - Halstead, KS later Parsons Self Feeder Co.- Newton, IA later Maytag Co. - Newton, IA) - - 6.75". Also shown in M. Rumely Co. Threshing Machine Parts Lists. Excellent. (R1-405)

0720. Lot of 2
(1.) Unmarked - - 8.25" aluminum drenching bit? Used to hold an animal's mouth open when giving medicine. Excellent
(2.) SHORES - CEDAR RAPIDS, IOWA - PAT. APPLIED FOR - - 10" drenching bit. I found patent No. 1,311,409 that was issued to Robert L. McAlister of Shenandoah, Iowa on July 29, 1919 for a "Drenching-Bit for Animals". An advertisement for Shores Hog Wormer pills shows this bit. Good++. *PAT*

0721. Lot of 2
(1.) ROTARY CLINCH TONGS CO. - PAT'D. DAVENPORT, IOWA - -15" farrier's horseshoe nail clincher tongs. Good++. (patent not found)
(2.) Unmarked - - 10.5" horseshoe calk plier type wrench. Looks like S883 described as "Never Slip Caulk Wrench - Old Style - Pat. Nov. 6, 1875", Fair with pitting. (couldn't find patent, Nov. 6, 1875 is not a patent date)

PiCs Lots 712 thru 721

0722. 1207E (Port Huron) - - 11.5" steam engine wrench. Major pitting. (R2-236)

0723. Lot of 5
(1.) Can't read markings - - 10.75" oddball thin, wide cast wrench with large hammer head. Pitted.
(2.) 533 (orphan) - - 6.25" odd ball. Good+ with pitting, over cleaned.
(3.) Unmarked (orphan) - - 7" odd ball with an open end and a screwdriver bit. Excellent.
(4.) CU89 (orphan) - - 8.5" cast odd ball open end with two tabs on end. excellent.
(5.) LEX / 10 (orphan) - - 9" cast odd ball open end with stove lid lifer? end. Excellent.

0724. Lot of 2
(1.) 117A (Advance-Rumely) - - 7.75" Steam engine wrench. High raised letters on a slug plate. Good++. (R2-3)
(2.) 293 with Illinois Malleable Iron Co's "IM" logo (orphan) - - 13" cast enclosed box end. Excellent.

0725. PRINCESS / PRINCESS (Princess Plow Co. - Canton, Ohio) - - 9.5". Good+. (R1-386)

0726. 32 (Wheel & Seeder Co., La Crosse, Wisconsin) - - 8.75" cast clevis pin with three open wrench openings. Top part of pin is ridged instead of round variation. Excellent.

0727. Lot of 2
(1.) C621 (Appleton Mfg. Co. - Batavia, Ill) - - 9.75". Excellent. (R2-13)
(2.) INDIANA SILO CO ANDERSON IND / (marked same on both sides) - 12". double open end "S" wrench. Excellent. (R1-249)

PiCs Lots 722 thru 727

0728. 1891 (Peoria Drill & Seeder Co.) - - 7" with a wing nut wrench. Good++. (R3-174)

0729. AMERICAN HARROW CO. - DD67 / DETROIT MICHIGAN USA - - 13.75". Good++. (R1-14)

0730. Lot of 3
(1.) 3420 (Monmouth Plow Co. - Monmouth, ILL.) - - 14". Unlisted five opening variation Poor with severe pitting. (five opening wrench not in Rathbone, see R3-157)
(2.) B.F. AVERY AND SONS - G178 / LOUISVILLE KY USA - - 12.5" Excellent. (R1-27)
(3.) P315 (Verity, later Massey Harris) - - 11". Excellent. (R2-282)

0731. A399 (Huber Mfg. Co. - Marion, Ohio) - - 11" by 12.5" massive tee socket wrench. Excellent. (R2-134)

0732. Lot of 4
(1.) M55 (Stoddard Mfg. Co. - Dayton, Ohio) - - 8.5". Excellent. (R1-441)
(2.) Marked only "2-1/4" (orphan) - - 14" extra large wagon hub type wrench. Excellent.
(3.) MALSBARY 6180 (Holt Mfg. Co. - Stockton, Calif.) - - 13". Holt Mfg. made the Malsbary Gain Drill. Good++. (R1-306)
(4.) WP1 (Tudhope-Anderson - Orillia, Ontario and Winnipeg, Manitoba, Canada - Also on the IHC List) - - 9.75". Small markings variant. Excellent. (R2-279)

0733. J I CASE PLOW CO / 124 - - 10" Rare Early J I Case Plow Works wrench before the company changed its name in 1884 Good+ with some pitting. (R1-77)

PiCs Lots 728 thru 733

0734. Lot of 5 Bay State ratchet wrenches. Patented by Peter Lord of Worcester, Mass on Jan 15, 1901. *PAT*
(1.) THE BAY STATE / PAT JAN 15 1901 - - 6" single ended. Excellent.
(2.) THE BAY STATE / PAT APPLD FOR - - 6" double ended. Good+.
(3.) THE BAY STATE / PAT APPLD FOR - - 6.75" double ended. Excellent.
(4.) THE BAY STATE / PAT APPLD FOR - - 7.75" double ended. Excellent.
(5.) THE BAY STATE / PAT JAN 15 1901 - - 10" single ended. Excellent.

0735. WILSON PIPE WRENCH - PATD APR. 3, 1883 - - 13.75" all metal self adjust pipe wrench with three adjusting slots in the shaft. Patented by Henry B. Williams of Fremont Centre, Mich. Excellent. (S729) *PAT*

0736. PAT'D OCT 26, 80 - - 10" hog nose cutter. Couldn't find the Oct. 26, 1880 patent but Patent 242,036 issued to Robert Premble Sr. and Jr. and James Hays all of Cerro Gordo, Illinois. First one seen. Good++. *PAT*

0737. GORDON AUTOMATIC - PAT'D USA - - 7.25" nut wrench with rack teeth and spring loaded lower jaw. Patented by William Gordon of Union, New Jersey on June 07, 1921. Good++. (S493) *PAT*

0738. Lot of 2
(1.) CHARLES PARKER CO. - MERIDAN, CONN USA / Vise Wrench No. 2 - - 6". Some light pitting.
(2.) Unmarked - - 13" extra long horseshoe calk pliers. Excellent.

PiCs Lots 734 thru 738

0739. Set of four pipe jaw adapters for monkey wrenches. Marked P. V. CO. (Prentiss Vise Co. of New York) - PAT. DEC, 89 and sizes 8, 10, 12 AND 18 with the original dovetailed wooden box. 2" to 3-1/2", Patent was granted to James Kenney of Newark, NJ on Dec. 31, 1889. Condition is Excellent, like new. Probably never used. *PAT*

0740. W &: B in a diamond logo (Whitman & Barnes) / 3 - - 11" extra large double ended alligator wrench. Good++ with most of the original plating. A few minor dings.

0741. FOR USE ONLY WITH / THE PERFECT VALVE SPRING LIFTER - - 3.25" small soe wrench with a socket wrench and other valve lifter parts. Excellent

0742. THE DISBROW - COMBINED CHURN & WORKER / COMPLEMENTS OF OWATONNA MFG. CO. AND CREAMERY PACKAGE MFG. CO. - - 4" rare small advertising double ended alligator wrench. The Disbrow was a combined butter churn and butter-worker patented Oct. 2, 1906 by Godfrey J. Kaplan, of Owatonna, Minn. Kasplan assigned one-half to Lutheria Disbrow, Of Owatonna, Minn. and one-half To Reuben B. Disbrow, Of Minneapolis, Minn. Good+.

0743. Lot of 3
(1.) Unmarked - - 4.75" flat steel alligator wrench and screwdriver. Advertised as a "Bicycle Wrench", Good++.
(2.) Unmarked - - 8.75" odd double ended alligator made from two thin steel plates riveted together. Good++.
(3.) RONSON ALLIGATOR - PATENTED - - 8.5" combination tool with an alligator wrench, several hex and open end wrenches rethreading dies, a screwdriver and bottle opener. Decorated with a figure of an alligator with scales. Designed patent was issued to Louis V. Aronson of Newark, NJ on July 9, 1918. and made by the Art Metal Works of Newark, NJ Good+ (S10) *PAT*

0744. THE ELGIN - PAT. JUNE 8, 97 - - 7" adjustable alligator wrench also inscribed JOHN PRITZLAFF HARDWAE CO - CHICAGO. Excellent with original plating.

0745. THE ELGIN - PAT. JUNE 8, 97 - - 7" adjustable alligator wrench also inscribed BEST WISHES FOM RODERICK LEAN MFG. CO. - 1911 KANSAS CITY CONVENTION - 1911. Excellent with original plating.

0746. THE ELGIN - PAT. JUNE 8, 97 - - 7" adjustable alligator wrench also inscribed WHITAKER MFG, CO, - CHICAGO. Excellent with most of the original plating.

PiCs Lots 739 thru 746

0747. Set of six bearing scrapers in the original wooden box. All marked BUFFUM TOOL CO. LOUISIANA, MO. - - 9.25" to 16.5". Excellent.

0748. BUFFUM TOOL CO. LOUISIANA, MO - DROP FORGED (with a swastika logo) - - 8" double ended alligator wrench with rethreading dies. Excellent.

PiCs Lots 747 thru 748

0749. Unmarked (Staples and Hames patent) - - 6" adjustable nut wrench attachment for a brace with the original box. Box reads: "Patent No. 102388 (Canadian patent) - Dec. 4th 1906 - Will Fit any Brace and Adjust to any size from 3/4" to 1" (with picture of wrench) / The Hanes & Staples Patent Adjustable Wrench / Hames, Staples & Duncan Sole Manufacturers - Hamilton. Ontario. American Patent No. 960,315 was granted to F. A. Hanes and W. Staples on June 7, 1910 and assigned to William Moore Duncan all of Huntsville, Canada. Rare wrench is in Excellent like new condition with outstanding two tone finish. Box shows wear *PAT*

0750. Unmarked - - 17.5" geared speed type wrench. A 1921 ad for the Sawyer Mfg. Co. of Lincoln, Neb. explains wrench was for the fourth connecting for Model "T" Fords. One of numerous wrenches made for that purpose. Good++.

0751. Marked only "10" - - 14.5" adjustable nut and bit brace. Patented by Quimby S. Backus of Millers Falls, Mass. on Nov. 05, 1872. A 1880 advertisement for brace wrenches shows Backus was located at No. 102 Chambers ST, New York. Rare wrench in excellent condition with nickel plated finish Does have former owners initial "W" carved on edge of wooden pad and on the brace. *PAT*

0752. Marked only PAT'D 1873 - - 14" adjustable nut brace wrench. Patented Dec. 16, 1873 by Sylvester Wright of Ellsworth, New York, Designed especially for use on carriages. Good ++. (S54, C343) *PAT*

0753. Unmarked (Holman's patent) - - 7.5" self adjusting wrench attachment for a brace. Patented by Jurney Hubert Holman of Unionville, Missouri on Nov. 27, 1906. First on we have had to list. Excellent. *PAT*

PiCs Lots 749 thru 753

0754. VULCAN 10 - MADE IN USA BY J. H. WILLIAMS & CO. - BROYLIN, NY - PAT'D IN USA OCT 27, 96 - FEB. 23, 97 (also lists patents issued in England and Canada - - 13.75" chain wrench. A total of five chain wrench patents were issued on these dates to William Joseph Grinden and George Amborn, Jr., both of Brooklyn, NY. Excellent, like new. *PAT* - - *PAT*

0755. 18 - MFD. BY McKAIG-HATCH INC. - BUFFALO NY / 1045 - FORGED STEEL - MADE IN USA - -16" heavy duty all metal Stillson type pipe wrench with a lever operated mechanism to tighten and lock the adjustable jaw. Newer wrench but the first I have seen. Excellent with some wear to the original finish. (not listed, no info found)

0756. BEMIS & CALL CO. - SPRINGFIELD, MASS USA / NO. 2 - - 15.5" wooden handled pipe wrench with hex and ring adjusting sleeve and a spring behind the moveable jaw. Made to Amos Call's patent of Aug. 28, 1866. Good+ with handle cracks and slice missing, weak mark. (S839) *PAT*

0757. 14" MAGNUM TOOL CO - PAT PEND. / 14" MAGNUM PIPE WRENCH - - 14" self adjust pipe wrench with a pivoting, spring loaded upper jaw that can be set to four different notches on the handle. Patented by Carlos V. St. Claire, San Bernardino, CA. Excellent. (S335) *PAT*

0758. C. S. Osbourne. & CO. STEEL - - 14" extra long gas type pliers. Extra.

0759. Lot of 3
(1.) BOOS TOOL CORP - K. C. MO. - PAT. PEND.-- - 6.25" turn handle to adjust wrench. Serrated top jaw and smooth bottom jaw variation. There are several variations of this wrench. Has a 3/8" crack on the end of handle, otherwise excellent. (see S381)
(2.) PADEN MFG. CO. - OMAHA, NEBR. - - 7.5" locking pliers with a quick adjust sliding lower jaw. Patented by Dale D. Paden, Omaha, Neb. on Sept. 22, 1959. Not marked with the patent number variation. Good+. (S270) *PAT*
(3.) Unmarked - - 10" Cronk type fencing pliers. Patented by William Cronk of Montour Falls, NY on Oct. 7, 1909. Excellent. (Smith-52 and 53)

PiCs Lots 754 thru 759

0760. GRAHAM, BAILEY & CO. - PAT. DEC. 3, '89 - Buffalo, N.Y. - - 21.5" unusual lever operated quick adjust pipe wrench. Patented by Richard J. Robbins of Suspension Bridge, NY. Also mfg. by the Graham Vise Wrench Co. of Buffalo, New York. Rare wench, first of this size seen. Good++, some weak markings but others I have seen were unreadable. (S658, C147) *PAT*
Advertising Trade Card PiC

0761. Unmarked - - Unusual chain pipe wrench with cast handle. Patent was granted to Edward O. Ely of Boston, Mass. on Jun. 24, 1890. First one we have listed. Excellent. *PAT*

0762. THE HAMMOND MFG. CO. - BOSTON, MASS USA / PATENTED APRIL 3. 1900 - - 22" quick adjust rack type wrench with a lever that releases the upper jaw. Rare large size. Patent was issued to Edward Wright of Worcester, Mass. Excellent. (S676) *PAT*

0763. AMPCO (in a diamond logo) W214 - - 22.5" Beryllium pipe wrench. $424.00 new price. Excellent.

PiCs Lots 760 thru 763

0764. FAIRBANKS NO.2 / PAT JAN 5,1886 - -21.5" self adj. pipe wrench with pivoting upper jaw that pivots inside the lower jaw slots. Patented by James E. Davis of Palmyra, Ohio. Good++. (S358) *PAT*

0765. FAIRBANKS NO.1 / PAT JAN 5,1886 - -17" self adj. pipe wrench with pivoting upper jaw that pivots inside the lower jaw slots. Patent info same as Lot 764 above. Good+, some minor pitting, few blurry markings. (S358) *PAT*

0766. THE GEALY NO. 00 - PAT'D OCT 17TH 1905 / GROVE CITY, PA - - - 17" rare cast chain type pipe wrench. Patentee was George M. Gealy of Enon Valley, Penn. Excellent (not listed) *PAT*

0767. Faint markings, most not readable (Seymour's patent Acme twist handle) - - 21" Acme type twist handle nut wrench. Hard to find, desirable 21" size Patented Feb. 27, 1883 by Frederick H. Seymour of Detroit, Mich. Good++ with minor hammer damage on jaw edges. *PAT*

0768. HOLLANDS MFG. CO. - ERIE, PA - 1-1/2 / HOLLANDS MFG. CO. - ERIE, PA - - 14" attractive cast pipe tongs. Different than other Holland wrenches seen. First one we have had to list. Excellent.

0769. Unmarked - - 15" Coes type wooden handled monkey wrench with a unique final tightening and locking lever below the adjusting nut. Advertised as "Taft's Vise Wrench". Patent was issued to Walter E. Taft of Providence, RI. Very rare wrench, only second one we have had to list and first in this large size. Fair with dings, grind marks, has an excellent replaced handle. (not listed in Schulz or Cope) *PAT*

PiCs Lots 764 thru 769

0770. Marked only with a "D" (Melotte) - - 17.5 cast cream separator bowl wrench. Handle is pitted. (R2-197)

0771. E W B CO - 20 / 240-135 - - 17.5" heavy cast wrench. may be E. W. Bliss & Co. of Brooklyn, NY. Good++.

0772. WRENCH FOR GOVERNOR 2463 (Stickney Gas Engines - Charles A. Stickney Co., St. Paul, Minn.) - - 17.57". Excellent. (R2-253, under Russell & Co., also see R3-210 )

0773. P & O CANTON ILL - 3637 (IHC) - - 20.5". Scarce, large and showy IHC wrench. Excellent. (R1-370)

0774. A316 (Huber - Marion, Ohio) - - 19.75" cast, large, impressive steam engine wrench. Good++, overall casting roughness. (not pictured in Rathbone)

0775. Unmarked (orphan) - - 18" odd ball heavy cast wrench with raised center ridge. Good++ with casting roughness.

PiCs Lots 770 thru 775

0776. A - IOWA VALVE CO. - OSKALOOSA IA. - - 16" fire hydrant and hose coupling wrench. Good++ except has old welded repair.

0777. 300 (Huber Mfg. Co. - Marion, Ohio) - - 17" large single open end wrench. Good++ with some light pitting. (R2-133)

0778. BLANCHARD HIGH POWER VERTICAL SUJRFACE GRINDER / 8459 - COLUMN BUSHING ADJ - FACEPLATE NUT - P - - 18" heavy cast "showy" wrench. Excellent. (R4-19)

0779. 883C (Case T. M. Co.) - - 16" doe-s for Case Steam Engines. Excellent with small drilled hang hole. (R1-81)

0780. F704 (Oliver) - - 8.5". Severe pitting. (R2-224)

0781. DISK C (orphan) - - 17.5". Wrench is about 3" longer than the look like Janesville Machine Co.'s DISK wrench. Good++, with light pitting.

0782. 2763 (orphan) - - 17". Looks like Case 1407 wrench, Has ten holes thru the shaft, outstanding high relief markings. Excellent.

PiCs Lots 776 thru 782

0783. RICHMOND MACHINE WORKS (Richmond, Indiana) - - 23.5" large heavy cast "showy" wrench. Probably used on saw mill arbor nuts. First one seen. Excellent, painted.

0784. M350 - USE FOR AXLE NUTS ONLY (Russell Grader Mfg. Co. of Minneapolis, Minn. later Caterpillar) - - 15.25". Not marked Super Mogul on back variation. The M350 wrenches have been attributed to IHC, Standard Ditching Machine Co and Caterpillar but the Russell Grader Mfg. Co. of Minneapolis, Minn. made the Super Mogul graders. Caterpillar purchased the company in 1928. Good++, painted.

0785. 197494A (orphan) - - 15.75" extra heavy double hex box wrench with raised center rib.

0786. 9477 (Buffalo Pitts - Buffalo, NY - Threshers, Horse-Powers and Attachments - also sold by IHC) - - 5" by 15" tee handled square socket wrench. Excellent. (R2-44)

0787. Lot of 2 David Bradley ET wrench variations. one has a open end on top of the big end, other one does not.

0788. DH18 (Butcher & Gibbs - Canton, Ohio) - - 5.5" by 15". Extra long tee wrench. Most seen have been 12.5" long. Excellent, painted. (R1-31)

0789. Lot of 2
(1.) M627 (Kirlin Plow Co, Kansas City, Missouri & Beattie, Kansas) - - 9". Good+, minor pitting. (R4-130)
(2.) 768A (Adriance Platt & Co. - Poughkeepsie, NY, later Moline Plow Co.) - - 8". Good++. (R1-5, R1-332)

PiCs Lots 783 thru 789

End of cataloged individual lots. There may be additional unlisted lots

Choice Box Lots (will be offered choice item or items from each lot)

Choice Box 001: Lot of Seven Case Threshing Machine Co Tee Socket Wrenches - Several Different Variations (R1-82)
(1.) 5524T - Case Eagle logo (Case T. M. Co.) - - 5.5" by 11". Tee socket wrench. Excellent.
(2.) 5524T - Case Eagle logo (Case T. M. Co.) - - 5.5" by 11". Tee socket wrench. Good+, new paint.
(3.) 5594T / CASE MADE IN USA (Case T. M. Co.) - - 8.25" by 8". Tee socket wrench. Part No. on vert. shaft variation Excellent.
(4.) 46CL - Case Eagle logo / CASE MADE IN USA (Case T. M. Co.) - - 8" by 8" Tee socket wrench. Good+.
(5.) 46CL - (Case T. M. Co.) - - 8" by 8" Tee socket wrench. Fluted shaft variation, Good++ with light markings.
(6.) 5994T - Case Eagle logo (Case T. M. Co.) - - 8.5" by 8.25". Tee socket wrench. Part No. on horz. shaft variation. Good, painted, crack on one socket corner.
(7.) 46CL - Case Eagle logo Case T. M. Co.) - - 8" by 8" Tee socket wrench. Excellent. (R1-82)

Choice Box 002: Lot of Seven Case Wrenches
(1.) 01982AB (Case T. M. Co. - - 13" tractor hubcap wrench. Flat variant. Excellent. (R1-78 with Case Plow Works
(2.) 3330A X (with Case Eagle logo - Case T. M. Co.) - - 7.25" tapered cast double sparkplug socket. Severe pitting. (R1-82)
(3.) 3330A (Case T. M. Co.) - - 8" cast double hex spark plug socket. Good++. (R1-82)
(4.) Unmarked (Case Threshing Machine Co. 0270T) - - 17" threshing machine cylinder wrench. Good+. (R1-81)
(5.) 886C (Case T. M. Co.) - - 7.5" doe for Case Steam Engines. Good+ with owner's ID ground grove on jaw edge. (R1-81)
(6.) CASE / 76L - - 7" Grain drill wrench with stud. Severe pitting. (R1-77)
(7.) 5548T with Case Eagle logo (Case T. M. Co.) - - 7.75". Early Case Threshing Machine wrench. Fair, some pitting. (R1-81)

PiCs Choice Lots 1 and 2

Choice Box 003: Lot of 8 Farm Wrenches
(1.) CASE / MADE IN USA - 0205T1 with Case Eagle logo (Case T. M. Co.) - - 19.25" threshing machine cylinder tooth straightener. Good++, some weak markings. (R1-82)
(2.) FORD (script) USA-M-40-17017 - - Open end with flange by six point box end. For 1933-34 Fords. Excellent.
(3.) Marked only with Moore's "M" in circle logo - - Spark Plug and cylinder head wrench for Model A Fords. Excellent.
(4.) TIGER - PAT. MAR. 8, 1904 - - 17" threshing machine cylinder tooth ratchet wrench with handle and one hex socket. Patent granted to William R. Johnson of Freeport, Illinois. Good+. (S45, R1-455) *PAT*
(5.) 803? (orphan?) - - 7" doe. Poor markings.
(6.) PAT SEP 7 97 -21 (Vandegrift patent) - - 9". Partial markings on head. Poor with handle break, pitting.
(7.) R. D. LITWILLER STEWARD, NEBR. - - 18" chain drive threshing machine cylinder tooth ratchet wrench with handle and hex socket. Patent 1,578,331 granted Mar. 30, 1926 to Robert D. Litwiller of Seward. Similar ones seen marked "THE HANDY WRENCH - Port Huron Machinery & Supply Co., Lincoln, Nebraska. Good++ with some pitting on chain guard plates. (see (S46, R1-215) *PAT*
(8.) CASE / 0205T1 with Case Eagle logo (Case T. M. Co.) - - 20.25" threshing machine cylinder tooth straightener. Pitted, poor markings.

Choice Box 004: Lot of Six Farm Wrenches
(1.) 883C (Case T. M. Co.) - - 16.25" doe-s for Case Steam Engines. Good++. (R1-81)
(2.) Unmarked (IHC No. 2588T) - - 8" screwdriver. (R1-253)
(3.) 1068K (orphan) - - 18.5" Primitive ratchet. Looks like it may of come with some kind of farm equipment. Excellent with some original green paint. (not listed, no info found)
(4.) 333F (Belle City, Garden City) - - 12.25" Cast spanner wrench Good++ (R2-110)
(5.) 880C / "U" logo (Case T. M. Co.) - - 16.5" doe for Case Steam Engines. Good+, some minor edge dings. (R1-81)
(6.) B & C - SPRINGFIELD - MADE IN USA / BEMIS & CALL CO. - 14 IN 48 - - 14" large curved handle Crescent type. Good+ but knurl has a stripped area that makes it a quick adjust at that position.

PiCs Choice Lots 3 and 4

Choice Box 005: Lot of Six Farm Wrenches
(1.) PAT SEP 7 97 - 26 (Vandegrift patent) - - 7". Good+ except for hammer damage on top jaw heel.
(2.) H112 (Ohio Cultivator Co / Sechler) - - 9.5". Poor, serve pitting. (R1-357, R1-419)
(3.) D203 (Moline Plow Co.) - - 8.25". No star logo variant. Excellent. (R1-332)
(4.) KENTUCKY DRILLS / BRENNAN & CO LOU. KY. - KR299 (later IHC) - - 8.75". Poor, pitted. (R2-230)
(5.) P & O CO - 4130 / CANTON ILL (Parlin & Orendorff Co / IHC) - - 8.75". Severe pitting.
(6.) DEERE / DEERE (Deere No. 10008) - - 11.25". Fair with light pitting, some light markings. (Similar to DC1008 but with markings upside down.)

Choice Box 006: Lot of Six Farm Wrenches, tools, Etc.
(1.) THE BULLER SAW SET /SS - US PAT. 1485114 - 2048598 - - 12.5" cord wood saw set. Patents issued to Jacob W. Buller of Hillsboro, Kansas and Otto Frisk of Kiron, Iowa. Excellent. *PAT* - - *PAT*
(2.) E1015 (orphan) - - 9.75" by 10.25" L-shaped double socket wrench. Excellent. (not listed, no info found)
(3.) N. C. / L (New Casaday - South Bend Chilled Plow Co.) - - 13" with hammer head. One open end variant. Good. (R1-429)
(4.) M720 (E. W. Ross - Springfield, Ohio) - - 16.25" silo filler wrench. Good++. (R1-402)
(5.) LOWELL WRENCH CO. - WORCESTER, MASS. USA / LOWELL NO. 51 - PAT. PEND. - - 13" reversible ratchet. Good+.
(6.) W402 (Emerson, later Case T. M. Co.) - - 17" with fourteen holes in the shaft. Good+. (R1-163)

PiCs Choice Lots 5 and 6

Choice Box 007: Lot of Six Farm Wrenches
(1.) T147 C (Grand Detour Plow Co.) - - 7.75". Good++. (R1-205)
(2.) 3525G with IHC logo - - 6.75". Mold pattern maker's error for G3525. Excellent.
(3.) H911 / HD11 (McCormick-Deering / IHC) - - 7.5" Deering style wrench. Number raised near large end. Good, poor casting on numbers, looks like "HD11"
(4.) 1315 (orphan) - - 7.5" Neat oddball. Excellent. (no info found)
(5.) 106 (Moline Plow Co.) - - 8". Good, pitting
(6.) 4271 (Avery - Peoria, ILL) - - 10.75". Carburetor wrench for large Avery Gas tractor. Good++, weak markings as usually found.(R2-18)

Choice Box 008: Lot of Six Farm Wrenches
(1.) MONTGOMERY WARD - CHROME VANADIUM STEEL - - 8" cream separator wrench with double open ends, spanner, and screwdriver type tab. Good++. (R1-336)
(2.) UA51 - IHC logo / CANADA - - 8.5". All markings indented variation. Good+, light pitting.
(3.) VA94 (orphan) - - 6". Good++. (no info found)
(4.) S852 (Acme Harvesting Co. - Peoria, Illinois) - - 6" by 8" tee socket wrench. Good+ with poor markings. (R1-4)
(5.) 31 (Deere, Hart-Carter, Nichols & Shepard and Oliver) - - 6" x 8.5" tee socket wrench. Numbered on right variation. Good+ with drilled hang hole. (DC7 )
(6.) 1325EA with IHC logo - - 4.5". All markings raised variation. Excellent.
(7.) B573 (American Seeding Machine Co, Superior Drill Co. also on IHC Tool List) - - 8.5". (R1-16, R1-446) Excellent.

Choice Box 009: Lot of 6 Farm, Etc. Wrenches
(1.) ZA810 / IHC logo (IHC, originally McCormick) - - 9" pitman wrench. Vertical part number and all markings raised variation. Good++
(2.) 140M (Minneapolis Threshing Machine Co) - - 8.5" Steam engine wrench. Good with pitting. (R2-204)
(3.) NO 3209 CRANE TILTTRAP - - 9" with 2" single open end. Light pitting.
(4.) MORRISON 260 - - 10" Emerson style wrench. Pitted. (R1-340)
(5.) 1B5171 T 6 (Caterpillar) - - 8.5" Drain plug wrench Good++. (R4-40)
(6.) L299 with a double diamond logo (New Idea Spreader Co. - Coldwater, Ohio) - - 9". Excellent.

PiCs Choice Lots 7 thru 9

Choice Box 010: Lot of Four Deering / Utility Style Wrenches
(1.) DEMPSTER (Dempster Mill Mfg. Co, - Beatrice, Neb) - - 7.25" Deering Type. Good+. (R1-143)
(2.) DEERING (Deering Harvester later IHC) )- - 7.25" Deering style. Large letters variation. Fair.
(3.) HD911. with IHC logo / no markings on reverse side - - 7.25" Deering style. Numbers indented, logo raised. Excellent.
(4.) Unmarked Deering / Utility Style - - 7.25". Excellent.

Choice Box 011: Lot of Five Deering / Utility Style Wrenches
(1.) WYETH / 9000 ST JOSEPH (Wyeth Hardware Co) - - 7" Deering style. fair with pitting. (R1-500)
(2.) DEERING (Deering Harvester later IHC) - - 7.25" Deering style. Small letters variation. Fair with pitting.
(3.) 20 (R. Herschel Mfg. Co. - Peoria, Illinois) - - 7.25" Deering Style. Good+ (R1-231)
(4.) 7364L (Wm. E. Pratt Mfg. Co. - Chicago, Illinois) - - 7" Deering Style. Fair, pitting. (R1-385)
(5.) HAYES / A116 (Hayes Pump & Planter Co. - Galva, Illinois) - - 7.25" Deering Style. Good+. (R1-227)

Choice Box 012: Lot of Four Deering / Utility Style Wrenches
(1.) A J HARWI / UTILITY (Atchison & Wichita, Kansas) - - 7.25" Deering Type. Fair with pitting. (R1-226)
(2.) Marked only with a "B" in a diamond logo (Badger Arnholt?) - - 7" Deering / Utility Style. Excellent.
(3.) DEMPSTER (Dempster Mill Mfg. Co, - Beatrice, Neb) - - 7" Deering Type. Good looking wrench but has a tiny jaw corner crack and a drilled hang hole. (R1-143)
(4.) DEERING / DEERING (Deering Harvester later IHC) - - large letters both sides variant. Good some pitting.

PiCs Choice Lots 10 thru 12

Choice Box 013: Lot of Six orphan wrenches (no info found)
(1.) B (orphan) - - 8". Poor with pitting, can't read number but have seen others marked with a "B".
(2.) N52 (orphan) - - 7.5" with pitting.
(3.) G11 (orphan) - - 9.5". Good+.
(4.) 67 (orphan) - - 9.5" with large distinct markings. Excellent.
(5.) 41 (orphan) - - 8". There are at least two different 41 wrenches. See CB14 below. Excellent.
(6.) W7 (orphan) - - 12" square by hex extended socket. Good++.

Choice Box 014: Lot of Six orphan wrenches (no info found)
(1.) 41 (orphan) - - 8.25". Different wrench than the "41" in CB13-5 above. Good+.
(2.) VA94 (orphan) - - 6". Wrench Nos. VA94, RB124, GRB125 & Fairbanks 151 all look similar. Fair with pitting.
(3.) M58 (orphan) - - 5.5". Good++.
(4.) I-1 (orphan) - - 7.25" thin oddball. Excellent.
(5.) W101 (orphan) - - 5.5". There are similar wrenches Nos. W102 and W103 and W104 . W104 is pictured in Rathbone's book under Massey-Harris (see R3-141). There is a W104 and W103 in Choice Box No. 54) . Fair, pitted.
(6.) 41 (orphan) - - 8.25". Another different No. 41 wrench. Good+.

Choice Box 015: Lot of Six orphan wrenches (no info found)
(1.) 1214 (orphan) - - 7.5". Oddball. Excellent.
(2.) T262 with a "F" in a circle logo (orphan) - - 8.75" cast steel with single 12 point box end. Excellent.
(3.) M15 (orphan) - - 8". Nice wench but missing a jaw.
(4.) M3127 - - 7.5". Forged or cast steel with double hex box ends. Excellent.
(5.) R121 (orphan) - - 8.5" Same shape as Iron Age cutout wrenches. Good+ with some minor edge hammer damage.
(6.) B55 (orphan) - - 8". Good++.

PiCs Choice Lots 13 thru 15

Choice Box 016: Lot of Six Farm Wrenches
(1.) L299 with a double diamond logo (New Idea Spreader Co. - Coldwater, Ohio) - - 9". Good+. (R1-349)
(2.) L298 (New Idea Spreader Co. - Coldwater, Ohio) - - 8". Good+ but has owner's ID "IXI". (R1-349)
(3.) R438 with 3 dots variation (Emerson-Brantingham later Case T. M. Co.) - - 8.5" Excellent. (R1-162)
(4.) H (Badger Cultivator? - Council Bluffs, Iowa ) - - 10.5" with a hammer head. Some pitting. (R1-37)
(5.) NEVERSLIP "IN" with arrow logo / OUT with arrow logo (Neverslip Manufacturing Co. - New Brunswick, NJ) - - 8.75" horseshoe calk wrench. Fair with pitting.
(6.) GLOBE - - 9" cast fire sprinkler wrench. Excellent.

Choice Box 017: Lot of Six Farm Wrenches
(1.) C (Janesville Machine Co. Later Samson Tractor Co. wench 760367) - - 7". Fair. (R2-256)
(2.) 7370 -- (Empire Plow Co. - Cleveland, Ohio) - - 6.5". Marking variation with a dash after the part number. Excellent. (R1-166)
(3.) 884 (Frost & Wood) - - 4.75" Pitman wrench Good++ (R1-188)
(4.) R197 (McCormick / IHC) - - 8.25". Excellent.
(5.) L297 (New Idea Spreader Co. - Coldwater, Ohio) - - 6". Fair with pitting. (R1-349)
(6.) P942 (P.942) / cross logo & "DE" logo (Emerson later Case T. M. Co.) - - 7.75" Excellent. R1-162)

Choice Box 018: Lot of Six Farm Wrenches
(1.) Unmarked (IHC 51298D) - 13.25" double ended socket. Excellent.
(2.) P & O / P & O - - 11.25" double open end flat steel. Severe pitting.
(3.) 106S (Papec, Shortsville, NY) - - 6" x 13.5" tee socket wrench. Marked on single end rather than tee end. Indistinct markings. drilled hang hole? (similar to R1-368)
(4.) 4359 (P & O - later IHC) - - 12.5". Good+. (R1-370)
(5.) T1113 (orphan) - - 12.75". Good with pitting. (no info found)
(6.) 39M (Port Huron) - -12.25" large double open end wrench for steam engine stuffing box. Pitted. (R1-382)

PiCs Choice Lots 16 thru 18

Choice Box 019: Lot of Five Farm Wrenches
(1.) B (Janesville Machine Co., Later Samson Tractor Co. No. 750367) - - 9". Excellent. (R2-256)
(2.) 41 (orphan) - -8.25". Good with minor dings. (no info found)
(3.) LAX PLOW CO (La Crosse Plow Co. - La Crosse, Wisc.) - - 9.25". Markings indented variation. Good+ with light markings, not all readable. (R1-289)
(4.) D582 (Ohio Cultivator Co) - - 10". Some pitting. (R1-357)
(5.) 2420A (David Bradley?) - - 9.25". Good++. (not In Rathbone, Gil Irps ID)

Choice Box 020: Lot of Six Farm, Etc. Type Wrenches
(1.) N9 (orphan) - - 5.75". Looks like the more common M58 wrench. Excellent.
(2.) Unmarked (orphan) - - 5.5". Looks like M58 and N9 wrenches. Excellent.
(3.) A16 (New Departure?) - - 5.5" bicycle wrench for coaster brakes. Good+.
(4.) 12737D - F and IHC logo) - - 5" with logo, all markings raised variant. Excellent.
(5.) Unmarked (R1 Campbell Corn Drill Company - Harrison, Ohio) - - 5.25". Overall light pitting. (R3-41)
(6.) EMERSON - M.518 - - 6.5" pitman wrench. Severe pitting. (R1-162)

Choice Box 021: Lot of 6 Farm, Etc. Wrenches
(1.) THE CHANDLER & PRICE CO., CLEVELAND, O. USA / 761 - - 7". For printing presses? Fair, pitting, over cleaned
(2.) 78 / Logo? (Hart Grain Weigher Co) - - 5.5". Severe pitting. (R3-104)
(3.) 2 (orphan oddball) - - 7.75". Looks like Grand Detour Plow 13 and G13 wrenches. Good++.
(4.) P890 / IHC logo (IHC, earlier Osborne, later Emerson) - - 7.25". All markings raised and IHC on backside variation. Good, some pitting.
(5.) P890 - IHC logo (IHC, earlier Osborne, later Emerson) - - 7.25". All markings raised and on one side variation. Good+.
(6.) N963 (Massey-Harris or orphan) - - 5.75" heavy socket. Rathbone lists a N963 in latest Supplement but no description or photo). Interesting socket but does have an old bronze repair. First one we have had to sell.

PiCs Choice Lots 19 thru 21

Choice Box 022: Lot of Five Farm Wrenches, Etc.
(1.) G13 (Grand Detour Plow - Dixon, Illinois) - - 7" open, loop handle wrench with hammer poll. Small open end wrench on end of handle variation. Top part is missing and has been welded. (R3-94)
(2.) 12-18 (orphan) - - 9" unusual numbers on this wrench. Good+ with light pitting.
(3.) Marked only with Vlchek's "V" in a shield logo - - 9" all iron screwdriver like ones marked Fordson. Good++ except for hammer mushrooming on end.
(4.) Unmarked Farmer's Style Wrench - - 8.75". Similar to ones seen in Buford and Grand Detour Plow parts books. Good++.
(5.) D1 (Grand Detour Plow Co. later J. I. Case Threshing Machine Co.) - - 11.75". Excellent. (R3-94)

Choice Box 023: Lot of Five Animal husbandry and Mechanic Tools
(1.) DR. RINEHART HANDY HOG HOLDER - PAT NOV 24, 1931 - 1833759 / GALESBURG, ILL - - 21" cast. Patent was issued to Harvey M. Rinehart of Knoxville, IL. Excellent. *PAT*
(2.) Unmarked hog holder (looks like others seen marked E. C. Stearns & CO - Syracuse, NY) - - 13.75" cast. Excellent.
(3.) BILLMONT MASTER WRENCH PATENTED AND PATENTS PENDING - MFG. BY EDGAR C. GUTHARD CO. (CHICAGO, IL) - - 13.5" socket wrench that operates by turning the end of the handle. Patented July 22, 1919 by George Rice Fullenwider of Fairfield, Montana. Good with weak markings, no extra sockets. (S186) *PAT*
(4.) THE H .D. SMITH & CO - PERFECT HANDLE - PAT'D OCT. 30, 1900, JAN. 15, 1901, FEB 26, 1901. - - 8" wooden knife handled monkey wrench. Good+, some hammer damage.
(5.) LECTROLITE CORP - DEFIANCE, OHIO - - 11.5". Universal automobile drain plug wrench with eight openings including the 2" hex for Ford flathead V8's.

Choice Box 024: Lot of Six Misc. small Wrenches
(1.) 285 + (Valle & Kimes, Dayton, Ohio) - - 4.5. Excellent.
(2.) Ford (Script) USA - - 5.5" double open end Model "T" or "A" tool kit wrench. Good.
(3.) K4 (Dille & McGuire, Richmond, Indiana) - - 4.5". Small single open end with pointed end. Listed in Simmon's Catalogs for their KeenKutter lawn mowers. Excellent.
(4.) Marked only with a "P" (Whitman & Barnes?) - - 4" like the Whitman & Barnes P52 wrench. Excellent. (not in Rathbone)
(5.) 1893 (Dille & McGuire, Richmond, Indiana) - - 3.75". Cast. Excellent.
(6.) ARMSTRONG / NO. 2 - - 4.5 with screwdriver like extension. Excellent.

PiCs Choice Lots 22 thru 24

Choice Box 025: Lot of Six Farm Wrenches
(1.) 17 (orphan?) - - 6.25" doe-s. Rathbone lists a Harriman 17 wrench but no photo. Good.
(2.) X8 or 8X (orphan) - - 6.25" "propeller wrench". Double open end S-style with hole in center and flat back side .Good++.
(3.) 3 (Kingman Plow) - - 8". Listed in Rathbone as Kingman Plow Co. wrench but not the wrench shown in Kingman Parts Books. Good++. (see R1-284)
(4.) 8Z (or Z8) (orphan) - - 11". Good++.
(5.) >B60 (orphan) - - 10.5". Good looking wrench in excellent condition.
(6.) Unmarked Farmer's Style Wrench - - 12" large size. Similar to ones seen in Buford and Grand Detour Plow parts books. Pitted.

Choice Box 026: Lot of Five Tee Wrenches
(1.) 854 (orphan) - - 5" by 10". Missing one socket. light pitting, indistinct markings.
(2.) 2766 (Orphan) - - 5.75" by 8.5" tee socket wrench. Good+.
(3.) W75 / "P" in a square logo (orphan) - - 5.75" by 8" tee socket wrench. Good+.
(4.) 1126A (Moline Plow Co) - - 6.5" by 10.5"" tee socket wrench. Pitting, poor markings. (R1-332)
(5.) Unmarked (orphan oddball) - - 9" with three opening wrench on top and double square socket on the bottom. Excellent.

Choice Box 027: Lot of Six Farm Wrenches
(1.) 28 (orphan) - - 9.5". Neat looking wrench with heavy pitting.
(2.) Unmarked (orphan) - -5.5" odd wrench. Extended flange on square box opening is cracked.
(3.) 1214 (orphan) - - 7.5". Oddball. Excellent.
(4.) 918 (De Laval Cream Separator) - - 8". Light pitting, blurry markings. (R2-77)
(5.) R121 (orphan) - - 8.5" Same shape as Iron Age cutout wrenches. Good.
(6.) 90 (orphan) - - 8.5" with pitting, faint markings.

PiCs Choice Lots 25 thru 27

Choice Box 028: Lot of Six John Deere Wrenches
(1.) K806 (Deere) - - 12.5". Excellent with exceptional bold and clear markings. (D385)
(2.) VANBRUNT / D-380 (with JD logo) (Deere) - - 7". Excellent, like new with original finish. (DC286)
(3.) 31 (Deere, Hart-Carter, Nichols & Shepard and Oliver) - - 6" x 8.25" tee socket wrench. Numbered on right variation. Excellent. (DC7)
(4.) 196 (Deere) - - 7.25". Two square holes variant. Excellent. (DC45)
(5.) Unmarked (Deere C1591R) - - 2.25" cast socket (1-1/16" female and 7/8" male). Used with the D1083R Deere wrench. Excellent. (DC279)
(6.) Unmarked (John Deere D1083R) - -12.5" John Deere tractor wrench. Good+. (DC297)

Choice Box 029: Lot of Five Mixed Wrenches, Etc.
(1.) unmarked - - 10.5" carpenter's nippers. Good+.
(2.) U50 - IHC logo - - 8". Marking raised variation. Excellent.
(3.) U50 / CANADA - (IH logo) (IHC) - - 8". All markings indented. Excellent but shaft is twisted.
(4.) DEERING (in ledger plate logo) D736 (William Deering & Co. later IHC) - - 5.5" pitman wrench. Pitted.
(5.) Unmarked - - 12" face spanner wrench. Special tool for ???. Light pitting.

Choice Box 030: Lot of Seven Farm Wrenches
(1.) Unmarked - - 6.5" hog ringer pliers. Excellent but set screw is broken.
(2.) DAYTON - - 6.25", Small buggy wrench. Good+ with weak markings. (R1-128)
(3.) 325 (American Fork & Hoe Co. / True Temper of Cleveland, OH) - - 5.25" doe. Some pitting. (like R2-10)
(4.) P (Bateman Mfg. Co. - Grenloch, NJ) - - 5.5". Just recently identified as a Bateman Mfg. Co. wrench for their Gem of The Garden Hand Cultivators. Excellent. (R4-12)
(5.) Unmarked (like Pickering Governor wrenches) - - - 5" with 1-1/4" opening. Excellent. (R3-175)
(6.) ROCK ISLAND / R1124 - - 5.5". Severe pitting. (R1-400)
(7.) 5024X (orphan) - - 6.25" open end with a stove or range lid lifter? There is also a similar 5024 wrench. Excellent.

PiCs Choice Lots 28 thru 30

Choice Box 031: Lot of Five Farm Wrenches
(1.) J. I. CASE PLOW WORKS - 4105 - - 10". Good=, painted. (R!-77)
(2.) ROCK ISLAND / R1123 - - 7.75" Good++. (R1-400)
(3.) OHIO CHILLED / NEW IMPERIAL (B & G Plow Co. - Canton, Ohio) - - 9.5". Poor, pitted. (R1-31)
(4.) C188 - U (Rock Island Plow Co.) - - 10" with hammer head. Marked on large end variation. Good+ with some light pitting (R1-400)
(5.) B & G PLOW CO / CANTON O. - - 9.75". Some edge damage. (R1-31)
(6.) Unmarked - - 9" oddball with hammer head. Probably P.P. Mast & Co. C176 wrench, Rathbone also shows with Dempster and Mast, Foos wrenches. Good. (R1-143, R2-186)

Choice Box 032: Lot of Six Farm Wrenches
(1.) ECONOMY KING (King Separator Co. - Buffalo, NY) - - 7.75" open with screwdriver end, face spanner. No edge notch variation. Good+.
(2.) 178 (J. D. Adams - Indianapolis, Ind.) with dog bone logo - - 6.5". Pitted. (R2-2)
(3.) Deere Mansur CO / A522 - - 7.5". Painted. (DC173)
(4.) 5024 (orphan) - - 6" open end with a stove or range lid lifter? There is also a similar 5024 wrench. Excellent.
(5.) TAPPAN / 620 - 13 - - 6" cast stove wench and lid lifter? Excellent.
(6.) 1950-81 (orphan) - - 6" oddball. Thick, heavy cast double open end with two sizes on one end. Good+ couple blurred markings.

Choice Box 033: Lot of Six Farm Wrenches
(1.) R28 (Champion, later IHC, later B. F. Avery) - - 8.5" with hang hole, no IHC logo, numbers indented variation. Pitting, short, tight jaw corner crack.
(2.) Unmarked - - 5.25" open end by pitman flange wrench. Light pitting.
(3.) C108 (Nelson Bros - Saginaw, Mich. & Racine Sattley & Montgomery Ward) - - 5.5" by 6.5" cross. Gas engine wrench. Excellent. (not in Rathbone)
(4.) A-34 (Minnesota Prison Industries - Stillwater, Minn.) - - 5.75" flat steel doe. Good++. (R3-154)
(5.) Unmarked (like Oliver and Canadian IHC F153 wrench) - - 8.5". severe pitting.
(6.) Unmarked - - 8.25" six opening oddball. Light pitting.

PiCs Choice Lots 31 thru 33

Choice Box 034: Lot of Six Assorted Wrenches
(1.) 1E - 2E ("MC" logo) (IHC part 4E) - - 9.25" monkey wrench, solid handle variation. Good++
(2.) 2715 (P & O, later IHC) - - 9.5". All markings raised variation. Poor, pitted, over cleaned.
(3.) THE H. D. SMITH & CO. - ORIGINAL PERFECT HANDLE TOOLS - PLANTSVILLE, CONN. USA - - 8.5" monkey wrench. Good with weak markings.
(4.) N201 / double diamond logo (Nelson Bros - Saginaw, Mich., Racine Sattley, Montgomery Ward) - - 6.25" Gas Engine four-way socket wrench. Excellent. (R2-257)
(5.) PRESTO-O-LITE - / X - MADE IN USA - - 6" tee wrench for early automobile headlights. Excellent.
(6.) SPARK PLUG - GEN. NUT - 90257 / CYLINDER STUD - BATTERY NUT (Delco Light) - - 8". Pitting.(R3-64)

Choice Box 035: Lot of Six Assorted Vintage Wrenches
(1.) 1072 (Sattley Mfg Co) - - 10.5" with a hammer head. Square rather than round opening on big end variation. Good+. (R2-257)
(2.) A504 - "B" in a diamond logo (Gehl Bros. Mfg. Co. - West Bend, Wisc.) - - 10". Excellent. (R2-112)
(3.) MODEL G - BILLINGS & SPENCER (etc.) - - 11" auto type adjustable wrench. Hard to find B & Spencer wrench . striped knurl and rack teeth, old weld repair.
(4.) WIZARD NO. 9 - PAT'D NOV 14, 1922 - MADE IN WORCESTER, MASS. USA. - - 9". Good. *PAT*
(5.) BEMIS & CALL, etc. - - 12" all metal center shaft screw adjust monkey wrench. Crack on back of lower jaw, weak markings.
(6.) 4441A with Case Eagle Logo (Case T. M. Co.) - -13" Hub type wrench. Outstanding markings , has two old weld repairs. (R1-82)

Choice Box 036: Lot of Lot of Six Adjustable Wrenches, Etc.
(1.) 9 IN. CRESCENT TOOL CO - AUTO - FORGED STEEL / MFD BY CRESCENT TOOL CO, JAMESTOWN, NY - USA - - 9" high quality auto type wrench. The Crescent brand auto type wrenches are several times better made (and scarcer) than most of the more common auto type wrenches found. Good+.
(2.) 9 IN. AUTO - FORGED STEEL / MFD BY CRESCENT TOOL CO, JAMESTOWN, NY - USA - - 9" auto type wrench. Marking variation of wrench above. Good+.
(3.) DIAMOND CALK CO 11 IN / DIAMOND DULUTH, MINN MADE IN USA - - 11" auto type adjustable wrench. Good++.
(4.) 8" MASTERENCH (sic) / HELLER BROTHERS C0. (with horse logo) NEWARK, N. J. - PATENTED - - 8.5" self adjusting nut wrench with serrated jaws and square hole on end of the handle variation. Owners tags states purchased at the 1994 Alfred Schulz auction. Excellent.
(5.) KONDU BOX - 23W - 3/3 - 1/2 / EMI CO. - - 7" conduct wench? Excellent.
(6.) BEMIS & CALL H & T CO. - SPRINGFIELD, MASS USA / Bemis & Call logo - - 8" wood handled monkey wrench with long adjusting sleeve. Good.

PiCs Choice Lots 34 thru 36

Choice Box 037: Lot of Five Wrenches
(1.) J1506 - J1507 (IHC whole No. J1502) - - 16.5" ratchet, angled handle variant. Pitted, poor markings.
(2.) J1506 - J1507 (IHC whole No. J1502) - - 13" ratchet, straight handle variant. Good++ but spring is missing.
(3.) BONNEY VISE & TOOL WKS - PHILA, PA -THE MASTERPIECE - ESTABLISHED 1876 / PATENTED MAR 3, 1903 - Aug. 9, 1904 - - 13". Wood handled threaded shaft type combination nut and pipe wrench and should have a pipe cutter attachment. Patents granted to Charles S. Bonney of Portsmouth, Ohio and Joseph G. Baker of Philadelphia, PA. Scarce large size but cutter/pipe jaw attachment is missing, poor markings. (S567) *PAT*
(4.) BONNEY VISE & TOOL WKS - PHILA, PA -THE MASTERPIECE - - 11" like above but smaller size. Good++ but cutter/pipe jaw attachment is also missing.
(5.) COES - WRENCH CO. WORCESTER - MASS. USA / MFD UNDER - L. COES PAT'S - STEEL - - 15" with knife handle. Good++. (not listed, like HP58 but with wood handle not all metal)

Choice Box 038: Lot of Five Wrenches
(1.) 5E / IHC logo (IHC part 8E or 13067D) - - 11.5" monkey wrench, open handle variant. Poor, pitted.
(2.) COES WRENCH CO - WORCESTER, MASS / L. COES PATD. JULY 6, 1880 - JULY 8, 1884 - - 10"monkey wrench with wooden knife type handles. Good with several dings. (HP45)
(3.) THE LAMSON CASE HAREDNED L & S CO (Lamson & Sessions Co,) - CLEVELAND, O - - 12" wood knife handle monkey wrench. Fair with large chunk missing from one slab.
(4.) A. G. Coes Jog Bar wood handled monkey wrench with steam engine governor logo- - 10" with a few dings, indistinct markings.
(5.) BEMIS & CALL CO. / BILLINGS - - 12" all metal threaded shaft adjust monkey wrench. Marked with two companies. Probably one of the last wrenches of this type sold. Excellent.

PiCs Choice Lots 37 and 38

Choice Box 039: Lot of Five Different Wrenches
(1.) 176 (Avery Co.) - - 19.75" threshing machine cylinder tooth wrench. Good++, indistinct markings. (R2-18)
(2.) 1460 (orphan) - - 10.25". Early , crude looking open end wrench, Good+
(3.) Unmarked - -16.5" neat looking cast fire truck wrench. Excellent
(4.) Unmarked - - 14" self adjusting wrench. early, crude style. Good++ with small jaw tip chip, drilled hang hole?
(5.) Unmarked (South Bend Chilled Plow Co. - South Bend, Indiana) - - 16.5" big graphic wrench with several cutout sections. Used on South Bend's New Casaday Sulky Plows. Labeled "Octagon" in South Bend Parts Books and nicknamed "The Three Pound Wrench" by collectors. Good++. (R1-429)

Choice Box 040: Lot of Seven Farm and Misc. Wrenches
(1.) 918 (De Laval Cream Separator) - - 8". Light pitting, blurry markings. (R2-77)
(2.) 509 (Osborne, later IHC, later E&B) - - 7.5". With square opening, marked on other end of square (variation not listed) , markings indented. Excellent.
(3.) 533 (orphan) - - 6.75" oddball. Good++, indistinct markings.
(4.) 138 / U (Eagle Mfg. - Kansas City, MO and Dallas, TX) - - 8". Fair with pitting. (R2-84)
(5.) 3525G with IHC logo - - 6.5". Mold pattern maker's error for G3525. Good++.
(6.) 170 (orphan) - - 4.5". Excellent.
(7.) PAT. PEND. - ELECTRICAN'S UTILITY TOOL NO. 2000 Etc. - - 8" multi-tool for conduct fittings. Usually seen marked "Appleton Fittings Utility Tool". Excellent.

PiCs Choice Lots 39 and 40

Choice Box 041: Lot of Six Farm Wrenches and Misc. Tools
(1.) J1506 - J1507 (IHC whole No. J1502) - - 13.25" ratchet, straight handle variant. Excellent
(2.) Unmarked - - 13" cast button fastener tool, similar to ones made by Heaton. Excellent
(3.) DEERE MANSUR CO. / A523 - - 6". Good, light markings. (DC178)
(4.) H872 (Deering, IHC) - - 17" Deering Binder crank-wrench. Some pitting.
(5.) 3 (orphan) - - 8". Listed in Rathbone as Kingman Plow Co. wrench but not the wrench shown in Kingman Parts Books. Pitting. (see R1-284)
(6.) 2272 (orphan) - - 12.5". Large cast hubcap wrench. Badly pitted.

Choice Box 042: Lot of Six Farm Wrenches
(1.) Z810 (IHC) - - 7" pitman wrench, marking raised, no logo variation. Some pitting.
(2.) D304 (Eureka Mower Co. - Utica, NY) - - 9" Fair with pitting. (R1-169)
(3.) RITTER 1 - 2 - 3 - 4 (same markings both sides) - - 6.75". This one is iron, most are not.. Excellent with original black paint?
(4.) C338 (P. P. Mast, later Superior Drill Co, later Am. Seeding Mach. Co.) - - 8.75" with hammer head. Fair with pitting. (R1-314, R1-446, R1-16)
(5.) >P & O / P & O - - 11.25" double open end flat steel, Good, area of pitting g on one side.
(6.) M182 / P (Litchfield Mfg. Co. - Waterloo, Iowa) - - 9". Fair. with pitting.

PiCs Choice Lots 41 and 42

Choice Box 043: Lot of Five. Four hammers and one hatchet
(1.) Unmarked - - 13.5" straight claw hammer. Good+ with tight handle crack.
(2.) Unmarked - - 12.75" small hatchet with nail puller. Good.
(3.) Unmarked - - 11.5" German pattern cobbler's hammer. Old weld repair.
(4.) Unmarked - - 11.5" auto body hammer. Excellent.
(5.) PLUMB - - 13.5" straight claw hammer. Good++.

Choice Box 044: Lot of five. Four hammers and one hatchet
(1.) TRUE TEMPER - FLINT EDGE - - 16.5" Hatchet. Good with some dings mostly on the back side.
(2.) HAND MADE - DROP FORGED - - 11" light weight claw hammer. Good+.
(3.) Unmarked - - 12. 5" older style claw hammer with a crude owner made handle. Light pitting.
(4.) Unmarked - - 12" claw hammer. Good++.
(5.) STANLEY - - 13" claw hammer. Good+.

PiCs Choice Lots 43 thru 44

Choice Box 045: Lot of Five Farm Wrenches
(1.) Marked only "M" (like the A504 Gehl Bros. Mfg. Co. - West Bend, Wisc. wrench - - 10". Excellent. (see R2-112)
(2.) 2054 (orphan) - - 9.5". Light pitting.
(3.) 760 - I (orphan) - - 10.25" soe. Excellent.
(4.) RITTER 5 - 6 (same markings both sides) - - 8" aluminum odd ball wrench with two open ends numbered 5 and 6. Excellent.
(5.) Unmarked - - 10" flat steel with three extra large openings. Excellent.

Choice Box 046: Lot of Six Farm Wrenches
(1.) M P Co. logo (Moline Plow Co.) - - 7". flat steel doe. Good. (R1-332)
(2.) 369 (orphan) - - 6.5". Gear teeth on one end and open end on the other end, with peg variant (there are several variations of this wrench). Good++.
(3.) P & CO. / P & CO (marked on both sides) - - 9" doe S-wrench (13/16" by 1") flat steel. Pitting.
(4.) M231 (IHC) - - 6.5" open back, solid bar, raised markings variation. Some pitting.
(5.) - - 7.5" odd ball with four openings and a hammer head. Pitted.
(6.) L298 with a double diamond logo (New Idea Spreader Co. - Coldwater, Ohio) - - 7.5". Good+.

Choice Box 047: Lot of Five Wrenches (four farm and one lineman's
(1.) INDIANA SILO CO / 5/8 (cross logo) (Anderson Ind.) - - 11". double open end "S" wrench. Good++ . (R1-249)
(2.) DISK (Janesville Machine Co. Later Samson Tractor Co.) - - 14.". Some hammer damage on edge. light pitting. (R1-265)
(3.) MOLINE P / X5+ ("F" in a circled logo) - - 10.5". Error wrench for MOLINE PLOW CO / HX5+. Some edge hammer damage.
(4.) Marked only "A" (Janesville Machine Co. - Janesville, Wisc. Later Samson Tractor Co.) - - 12.25". Good+. (not shown in Rathbone but ID from parts list)
(5.) M. KLEIN & SONS / CAT 3146 - - 13" lineman's multi-wrench. Excellent.

PiCs Choice Lots 45 thru 47

Choice Box 048: Lot of Five 6" Wood Handled Monkey Wrenches
(1.) FORGED STEEL BAR - - 6.75" with all wood handle. Good with large drilled hang hole in handle.
(2.) GIRARD WRENCH MFG. CO. - GIRARD, PA. USA - - 6.5" with all wood handle. Good, some weak markings.
(3.) COES WRENCH CO. - - 6.5" with wood knife type handle. Good but with poor markings, not all readable.
(4.) The L. & S. CO. - CLEVELAND, O - USA (Lamson & Sessions) / CASE HARDENED - KNIFE HANDLE - - 6.75" with wood knife handles. Never seen these markings before. Good with handle crack, some poor markings.
(5.) COES - WRENCH CO. - WORCESTER - MASS USA / MADE UNDER L. COE'S PAT'S - STEEL - - 6.5 " with wood knife handles. Good. (like HP56 but with wood handle not all metal)

Choice Box 049: Lot of Five Six Inch Monkey Wrenches
(1.) Marked only with a diamond logo and "6" - - 6.5" with all wood handle. Good++.
(2.) Marked only with a "M" in a shield logo and "6" - - 6.25" with all wood handle. Wrench is excellent, handle has some damage.
(3.) COES - WRENCH CO. WORCESTER - MASS. USA / MFD UNDER - L. COES PAT'S - STEEL - - 6.5" with wood knife handle. Good+. (not listed, like HP58 but with wood handle not all metal)
(4.) COES WRENCH CO - WORCESTER - MASS. USA / MADE UNDER L. COES PAT'S - STEEL - - 6.25" all metal. Good+ with poor markings on one side. (HP56)
(5.) Marked only with a "M" in a shield logo and "6" - - 6.5" with all wood handle. Good with some pitting.

Choice Box 050: Lot of Lot of Five Six Inch Monkey Wrenches
(1.) Unmarked - - 6.75" with all wood handle. Unusual indented panels on bar sides. Good+.
(2.) Unmarked - - 6.5" with unusual flat wood knife type handle. Good+.
(3.) GRAY - 3 / ABE SILAS (probably former owner's ID) - - 6.75" with all wood handle. Good with handle crack.
(4.) GIRARD WRENCH MFG. CO - GIRARD, PA / GIRARD AG'L WRENCH - WARRANTED - - 6.5" with all wood handle. Scarce marking variation. Good with some weak markings.
(5.) COES WRENCH CO. / MFD UNDER L. COES PAT'S - STEEL - - 6.25" all metal monkey wrench. Some hammer damage. (HP58)

PiCs Choice Lots 48 thru 50

Choice Box 051: Lot of Five Adjustable Pipe Tongs. Ashcroft type patented Nov. 30, 1858 and July 7, 1868 by James R. Brown of Boston, Mass. *PAT*
(1.) Marked only "1" - - 14"adjustable pipe tongs. Good+.
(2.) O. W. S. CO. LTD. (Oil Well Supply Co.) - OIL CITY, PA / SOLID STEEL - - 14" adjustable pipe tongs. Good.
(3.) Marked only "11" - - 20" adjustable pipe tongs. Good++.
(4.) Unmarked - - 13.5" adjustable pipe tongs. Good+.
(5.) Unmarked - - 20.5" adjustable pipe tongs. Good+.

Choice Box 052: Lot of Seven Farm, Etc. Wrenches
(1.) P. P. Co. (Pattee Plow Co - Monmouth, Illinois) - - 6.5". Poor with severe pitting.
(2.) S793 (orphan) - - 6.25" doe wrench with spanner pegs (for cream separator?). Good+.
(3.) Unmarked (Osborne No. K234 -D. M. Osborne & Co, Auburn, NY later IHC) - - 3.5" by 5"tee handled socket wrench. Good with pitting.
(4.) Unmarked (like Superior Drill Co, A944 wrench ) - - 5.25" by 6.75" tee wrench with a cotter key hook? Good++. (see R1-446)
(5.) 369 (orphan) - - 6.5". Gear teeth on one end and open end on the other end, with peg variant (there are several variations of this wrench). Good+ with weak markings as usually seen.
(6.) EMERSON M.518 - - 6.5" Pitman wrench. Good with pitting. (R1-162)
(7.) BARCALO BUFFALO USA - PAT D111564 - - 6.25" combination tool with a hammer, screwdriver, jar, bottle and can openers, etc. Patented 10-4-1938 by Ernest Cullen (San Diego, Calif.) as a "Combination Kitchen Tool". Good++. (not listed) *PAT*

PiCs Choice Lots 51 & 52

Choice Box 053: Lot of Five Farm Wrenches
(1.) U51 (IHC) - - 8.75" Number raised, no log variation. Good+.
(2.) A (orphan) - - 8.25" oe by square socket. Good+.
(3.) B (orphan) - - 8" doe with long slot in center (for "A" wrench). Good+.
(4.) 111 (orphan) - - 9.25". Pitting.
(5.) 918 (De Laval Cream Separator) - - 9.75". Good++. (R1-141, R2-77)
(6.) S B Chilled P C (South Bend) Chilled Plow Co. - South Bend, Indiana) - - 9.5". Good+. (R1-429)

Choice Box 054: Lot of Six Misc. Wrenches, Etc.
(1.) BAY STATE AUTO KITS (same both sides) - - 10" female square ratchet with swivel head. Good++, with replaced bolts. (like S187)
(2.) NO. 7 - BMC MFG. CORP. - BINGHAMTON, NY - PATENT NO. 2388580 - - 7" Locking Pliers. Patented Feb. 19, 1946 by Francis Snell of Chenango Forks, NY. Minor jaw chip, plastic inserts are damaged. (S278) *PAT*
(3.) Unmarked - - 8.25" all metal machinist's hammer. Pitting.
(4.) ARMSTRONG - 11/16 / (arm and hammer logo) - HARDNED - - 12" construction or spud wrench. Excellent.
(5.) BARCALO-BUFFALO - PATENT NO. 1,870,612 - - 10.5" after market Ford wrench with five functions. Patent was issued to Alex de Schebeko of Chicago, IL on Aug. 09, 1932. Used for spark plugs, front and rear wheel brake adjustment, and drain plugs on Ford cars and trucks. Six point box ends variant. Excellent. *PAT*
(6.) Unmarked - -9.25" odd ball with two wrench openings, etc. Old weld repair.

Choice Box 055: Lot of Five Farm and Misc. Wrenches
(1.) 16367 with an "I" in a cross logo (orphan) - - 12.25" extra heavy single open ended wrench. Good+.
(2.) 2420A (David Bradley?) - - 9.25". Pitted. (not In Rathbone, Gil Irps ID)
(3.) B301107 (orphan) - - 11" heavy duty open end odd ball with odd ball type end with a small hex box end. Excellent with weak markings.
(4.) 172 (J. D, Adams, Indianapolis, Indiana) - dog bone logo - - 25", one size on open end variation. Good++.
(5.) Unmarked - - 9.25" odd ball with four openings and an end socket. Good++.

PiCs Choice Lots 53 thru 55

Choice Box 056: Lot of Six Farm Wrenches, Etc.
(1.) P. P. Co. (Pattee Plow Co - Monmouth, Illinois) / 100 - - 7.5". Poor.
(2.) 196 (Deere) - - 7.25". Two square holes variant. Good++ with weak markings. (DC45).
(3.) 46CL - Case Eagle logo Case T. M. Co.) - - 8" by 8" Tee socket wrench. Excellent. (R1-82)
(4.) DAIN / L136E (later Deere) - - 7.75". Number near long slot variation. Good with casting roughness. (DC410)
(5.) 1126A (Moline Plow Co) - - 6.5" by 10.5"" tee socket wrench. Excellent except for a drilled hang hole. (R1-332)
(6.) FITS-ALL WRENCH - PATENTED - TYPE D / FITS-ALL WRENCH CO. - PROVIDENCE, R. I. USA - - 6.5". dog bone wrench with ten openings. (S889).

Choice Box 057: Lot of Five Farm Wrenches, Etc.
(1.) H (Badger Cultivator? - Council Bluffs, Iowa ) - - 10.5" with a hammer head. Some pitted. (R1-37)
(2.) A10606 (orphan) - - 11" odd ball, open end by round hole. Excellent except last "6" is blurry.
(3.) 111 (orphan) - - 9.25". Good with light pitting.
(4.) Unmarked - - 9.75" carpenter's nippers.
(5.) 100 (Wood Bros. Thresher Co. - Des Moines, Iowa.) - - 10.75" offset double open end wrench. Old weld repairs. (R4-267)

Choice Box 058: Lot of Six Farm Type Wrenches, Etc.
(1.) VA94 (orphan) - - 5.75". Medium pitting.
(2.) M58 (orphan) - - 5.5". Good++. Pitting.
(3.) CHANDLER & PRICE, CLEVELAND, O. - - 5.5". For printing presses?
(4.) 369 (orphan) - -6.75" open end with gear teeth on other end. No peg on open end variation. Light pitting, markings not readable.
(5.) W amp; B in a diamond logo (Whitman & Barnes) - MADE IN USA / NO. 1 1/2 BULL DOG - - 5.5" single ended alligator wrench. Excellent.
(6.) 13 (orphan) - - 5.75" doe. Pitted.

PiCs Choice Lots 56 thru 58

Choice Box 059: Lot of Six Adjustable Wrenches
(1.) THE BILLINGS & SPENCER CO. / TREATED STEEL FORGING - - 6" curved handle Crescent type adjustable wrench. Excellent.
(2.) ROBINSON / DROP FORGED STEEL - - 8" curved handle Crescent type wrench. Good++.
(3.) H. D. SMITH & CO. - PLANTSVILLE, CONN. - PAT. JUNE 9, 1914 - PAT, Feb 20, 1917 - MADE IN USA - - 7" all metal offset pliers. Listed as No. 646 "Gittatit" Offset Slip Joint Pliers in H. D Smith Catalogs. Good++.
(4.) BOOS TOOL CORP - K. C. , MO.- PAT. PEND. - - 6" turn handle to adjust wrench. Serrated top jaw and smooth bottom jaw variation. There are several variations of this wrench. Good+. (see S381)
(5.) ADJUST-A-BOX - PAT NO. 2,912,891 ("R" in a circle logo) / 8 IN. - MFD. USA - ALLOY STEEL - - 7.5" Screw adjust box end wrench. Patented by Ted Neff of San Bernardino, Calif. Excellent with plated finish. (not listed) *PAT*
(6.) HASTEE 8 - DAVENPORT TOOL CO USA - US PATENT 3,803,954 - - 8" self adjusting wrench. Mfg. at Eldridge, Iowa and patented by Paul E. Lenker of Davenport, Iowa on Apr. 16, 1974. Owner's tags states wrench was purchased at the 1994 Al Schulz Auction. Excellent. (S321) *PAT*

Choice Box 060: Lot of Six Adjustable Wrenches (five wrenches and one saw set)
(1.) ONEHANDER - 10" / CHROMAVAN - MADE IN GERMANY - - 10" self adjust wrench. Serrated jaws variant. Excellent.
(2.) 10" MASTERENCH (sic) / (with horse logo) HELLER MADE IN U.S.A PATENTED - - 10.5" self adjusting wrench with serrated jaws and square hole on end of handle. The Masterenches were patented by Earnest E. Lynch of Hilmar, Calif. and Homer A. Mead of Turlock, Calif. on April 14, 1925. Good+. (S328) *PAT*
(3.) 8" MASTERENCH (sic) / (with horse logo) HELLER MADE IN U.S.A PATENTED - - 8.5" self adjusting wrench with serrated jaws and square hole on end of handle. Good+.
(4.) 8" MASTERENCH (sic) DROP FORGED STEEL / MFD. BY MASTERENCH CORP - TURLOCK, CAL. USA - PATENTED - - 8" self adjusting nut wrench with SMOOTH jaws and ROUND hole on end of the handle variation. Good+.
(5.) LIGHTNING WRENCH MADE BY HAMPTON MACHINE & TOOL CO. - - 9.5" adjustable pliers type wrench with screwdriver on end. Fair with poor markings.
(6.) E. M. BOYNTON PATENT - NOV. 25, 1873 - - 11" early patented saw set. Patent was issued to William Boynton of Battle Creek, Mich. Good++ but the top part of the adjusting screw is broken and missing. *PAT*

Choice Box 061: Lot of Six Adjustable Wrenches
(1.) GELLMAN WRENCH CORP.- ROCK ISLAND, ILL - POLLY / PATENTED APR. 17, 1923 6 IN NO. 21- - Quick adjust nut wrench. External spring variation. Poor with pitting.
(2.) THE LAMSON & SESSIONS CO. - CLEVELAND, O. USA - - 6,5" wood handled monkey wrench. Poor.
(3.) CARLL / PAT'D MAY 6-13 - - 6" Crescent type with reversible jaws for nuts or pipe. Patented by A. B. Carll of Boothwyn, Penn. Cracked jaw and light pitting. (S568) *PAT*
(4.) THE BAY STATE / PAT APPLD FOR - - 6" Double ended ratchet wrench. Patented by Peter Lord of Worcester, Mass on Jan 15, 1901. Good++. *PAT*
(5.) WAKEFIELD B-1 - MADE IN - WORCESTER, MASS. U.S.A. - - 5" pocket or bicycle wrench. Good++.
(6.) THE BILLINGS & SPENCER - HARTFORD, CONN. USA / TREATED STEEL FORGING - 6 IN ("B" in a triangle logo) - - 6" curved handle Crescent type adjustable wrench. Poor markings on one side.

PiCs Choice Lots 59 thru 61

Choice Box 062: Lot of Five Large Wrenches
(1.) BEMIS & CALL - 21 INCH NO. 90 / BILLINGS MADE IN USA - - 21.5.0" all metal monkey wrench. Good++.
(2.) ERIE TOOL WORKS - ERIE, PA. USA / AUTO NO. 14 - - 15" self adjust wrench with pivoting upper jaw. Pitted. (S337)
(3.) THE BILLINGS & SPENCER CO. HARTFORD CONN 15. IN G - -15" all metal automobile type adjustable wrench. Good++.
(4.) W&B logo (Whitman & Barnes) / No. 3 - - 15" single ended alligator wrench. Good.
(5.) B144 (orphan) - - 15.75" oddball. Good+

Choice Box 063: Lot of Six Oddball, Etc. Wrenches
(1.) Unmarked (orphan) - 7.25" odd cast double box end with open handle. Good+.
(2.) MULTI SOCKET / PAT PEND - -7.5" cast dog bone wrench Good+.
(3.) R-43 (Ruth Self Feeder Co. - Halstead, Kans. then Parsons Band Cutter & Self Feeder Co. - Newton, Iowa then the Maytag Co - Newton, Iowa, also shown in M. Rumely Co. parts books) - - 6.5" tee handled socket wrench. Excellent. (R1-405)
(4.) Unmarked (orphan) - - 7.75" Oddball. Excellent
(5.) R55 (Moline Plow Co) - - 7.5". Pitting. (R1-333)
(6.) Unmarked (orphan) - - 7,5". Thick cast oddball propeller type wrench. Excellent.

PiCs Choice Lots 62 and 63

Choice Box 064: Lot of Six Orphan Farm Type, Etc. Wrenches
(1.) 141 (orphan) - - 8". Good++.
(2.) Unmarked (orphan, like 141 wrench above) - - 8". Good++.
(3.) W104 (Massey-Harris) - - 8". Good++. (R3-141)
(4.) W103 (orphan) - - 5". Good++.
(5.) unmarked (orphan) - - 6" neat thick cast doe with four sizes. Good++.
(6.) Unmarked (orphan) - - 8.5" silo or coupling-pulley type. Good+.

Choice Box 065: Lot of Six Various Wrench Types
(1.) W. SCHOLLHORN CO. NEW HAVEN, CONN. - - 6.5" flat nose pliers with a wire cutter. Good++.
(2.) ET (David Bradley) - - 9.75" Scarce David Bradley wrench. Good. (see R1-126 for parts book picture)
(3.) W & B. and a diamond logo (Whitman & Barnes Co) - PAT APR 19, 1898 - - 9.5" knife handled pipe wrench with double lower jaw. Design patent was issued to Henry J. Martin of Chicago. Good with several handle cracks and missing piece. (C330, not in Schulz) *PAT*
(4.) 10606 (orphan) - - 9" open end by odd round opening with rod inside. Excellent.
(5.) CM/ 432 (orphan) - - 3.5" by 11.25" tee handled socket wrench.
(6.) PAT PEND. - MODEL 10 - REINHARD McCABE CO. - MINNEAPOLIS, MINN - - 10" quick adjust pliers type wrench. Good++. (S713, patent not found)

Choice Box 066: Lot of Six Wrenches - First four are modem recreation of a wrench patented by J. W. Saffold of Cleveland, Ohio on Dec. 28, 1920 that were heavily advertised in the 1980's as one wrench to replace all the other wrenches in your tool box. *PAT*
(1.) 9-14 MULTI WRENCH 15-22 / 3/8 HEAVY DUTY 13/16 - - 8.25"
(2.) 9-14 MULTI-WRENCH 15-22 / 3/8 DROP FORGED 13/16 - TAWAIN - - 8.5". Excellent, like new.
(3.) 9-14 MULTI-WRENCH 15-22 / 3/8 DROP FORGED 13/16 - TAWAIN - - 8.5". Excellent, like new.
(4.) 23-32 MULTI-WRENCH / 13/16 DROP FORGED STEEL - TAWAIN - - 11". Excellent, like new.
(5.) PERECT HANDLE - PATENTED / THE H. D. SMITH & CO - MADE IN PLANTSVILLE - CONN USA - - 12" wooden handled valve spring tool. Good++.
(6.) Unmarked, can't read number (orphan) - - 8.5" five opening cast farm type wrench. Pitting.

PiCs Choice Lots 64 thru 66

Choice Box 067: Lot of Six Small Cast Wrenches
(1.) 110 (orphan) - - 3.75". Small wrench with open loop handle. Excellent.
(2.) 206 (orphan) - - 4". three opening cast wrench. Excellent.
(3.) Unmarked (orphan) - - 4"small four opening cast wrench. Excellent with owner's ID "X" on one side.
(4.) Unmarked (orphan) - - 5.5" small cast wrench, double box ends with open shaft. Excellent.
(5.) 1036A (Pennsylvania Lawn Mower Co.) with a dog bone logo - - 6.25".small buggy type. Good++. (R1-375)
(6.) N9 (orphan) / (Link-Belt's dog bone logo) - - 5.5". Cast. Looks like the more common M58 wrench. Excellent.

PiCs Choice Lots 66 thru 67

Choice Box 068: Lot of Six Assorted Wrenches
(1.) FORD (in script) / 201 - - 5" doe older style Model "T" Ford tool kit wrench. Good+.
(2.) ROEBLING - TRENTON, N.J. - ALLIGATOR PAT'D / 1 - - 5.5" single ended alligator wrench with wrench openings. Good++.
(3.) G3173 F and IHC logo - - 4.5". Both number and logo embossed variation. Good+.
(4.) AMERICAN SEATING CO. UNIVERSAL DESK / 13986 (Grand Rapids, Mich.) - - 6" .For the old school desks. Good++. (R1-16)
(5.) MAYTAG (script) (Maytag No. 1) - - 5.25". Some areas of corrosion.
(6.) Unmarked (orphan) - - 6.5" with six openings. Good++.

Choice Box 069: Lot of Six Misc. Wrenches
(1.) 7306C (with Eberhard's "E" in a circle logo) - - 6.25" small buggy wrench. Pitting.
(2.) DISSTON USA / Keystone logo - - 4.25" cast handle for a saw blade. Patent was granted to Henry Disston and John Vandegrift both of Philadelphia, Penn. on Aug. 28, 1877. Excellent, no saw blade. *PAT*
(3.) 13 (orphan) - - 5.75" doe. Excellent.
(4.) G-3173 (G3173) / IHCO with IHC logo - - 4.5" all markings raised. Good++.
(5.) Unmarked (orphan) - - 6" stove lid lifter and wrench?. Good++.
(6.) HE PC No. 23945 - 4 - - 5.5" double hex box end. Excellent.

Choice Box 070: Lot of Six Assorted Small Wrenches
(1.) INTERTYPE / Billing's "B" in a triangle logo - - 4.75" open end with a spring loaded adjustable spanner. Excellent.
(2.) AA81 (orphan) - - 3" x 3.75" tee handled hex socket wrench. Good+.
(3.) BUHL SONS CO. (Detroit, Mich.) - - 4.75" side adjust bicycle or pocket wrench. Good.
(4.) SANDOW (in decorative lettering) THE LAVIGNE & SCOTT MFG CO, - PAT FEB. 5, 95 - NEW HAVEN, CT - - 5" center screw adjust bicycle or pocket wrench with skeleton handle. Patented by Joseph P. Lavigne of New Haven, Conn. Good with weak markings as usually found. (S109B) *PAT*
(5.) THE BILLINGS & SPENCER - HARTFORD, CONN. USA ("B" in a triangle logo) - - 4.25" bicycle or pocket wrench. Excellent with owner's ID initials "M T".
(6.) Unmarked (orphan) - - 7.5" cast doe. Good+.

PiCs Choice Lots 67 thru 70

Choice Box 071: Lot of Five Automobile, Etc. Wrenches
(1.) 748 - APCO MOSSBERG - ATTEBORO, MASS USA - - 11.75". "Universal drain plug wrench - Offset for knuckle clearance with eight sizes. Good.
(2.) KEN TOOL - G-30 - - 9.25" seven opening universal automobile drain plug wrench
(3.) Unmarked (Hudson and Essex) - - 12.75" pressed steel hubcap wrench. Excellent.
(4.) 15086 A 1(orphan) - - 11.75" cast hubcap wrench. Some pitting.
(5.) 8 IN / CHARLES E. HALL CO. - BUFFALO, NY USA - - 8" curved handled Crescent type. Scarce wrench from the Charles E. Hall Co. which was purchased by Barcalo Mfg. Co. in 1914. Good+ with some weak markings. (see Cope pg 153)

Choice Box 072: Lot of Six Farm and Misc. Wrenches
(1.) LUCKY 'LEVEN - CHICAGO / MAR. 15-21 PAT. - - 9" large malleable cast dog bone wrench with eleven wrench openings. Advertised as replacing seven wrenches used on Fords (for hubcaps, sparkplugs, cones, etc.) and manufactured by M. P. Wessling of Chicago. Design patent was issued to Cullen C. Evans of Los Angeles, Calf. Good. *PAT*
(2.) 35BX / X (orphan) - - 9.5". Good++
(3.) SAMSON LEVER JAW WRENCH - PAT APPL'D FOR - MADE IN USA - - 9.5" Vise Grip type locking pliers made by the Metal Engineering Co. of Chicago and Plano, Illinois. Good with minor dings.
(4.) 90 (orphan) - - 8.75". Good+ with faint markings.
(5.) Unmarked (looks like Blizzard Mfg. Co. of Canton, Ohio No. W9 wrench) - - 8.5". Excellent with small drilled hang hole. (See R2-36)
(6.) UNIVERSAL MADE IN USA / G-15 - FORD AND MANY OTHERS - KEN-TOOL - AKRON, OHIO - - 10" universal drain plug wrench with six openings. Good++.

Choice Box 073: Lot of Six Farm and Misc. Wrenches
(1.) Unmarked (orphan) - - 7" heavy, thick soe with open loop handle. Good++.
(2.) MAXWELL - 3 - - 7.75" double open ended flat steel wrench. Early Maxwell automobile tool kit wrench. Good+.
(3.) 270 (orphan) - - 6.5" oddball with two pegs and slot for fastening to the equipment. Poor, pitted, Indistinct markings.
(4.) 198 - 2 - "A' in a circle logo (orphan) - - 6.25"cast odd oe by hook spanner. Excellent
(5.) 8X or X8 - - 6.75" double open end S-style with hole in center and flat back side (propeller type). Excellent.
(6.) DK808 - William's "W" in a diamond logo - -6.5" forged face spanner. Excellent.

PiCs Choice Lots 71 thru 73

Choice Box 074: Lot of Six Farm Wrenches
(1.) F1095C / IHC logo on one socket and 1096C / IHC logo on the other socket. - - 21". Excellent
(2.) Unmarked - - 9.75" Eberhard type buggy wrench. Pitting.
(3.) G282 (orphan) - - 13.5". Impressive looking large double hook spanner wrench. Excellent.
(4.) Unmarked (IHC No. H3769M) - - 17" threshing machine wrench. 3/4" box end opening variation. Good++.
(5.) 3274A with IHC Logo / W - - 13" socket wrench with sliding handle. Excellent. (R1-251)
(6.) J. H. CO / 630 (Johnston Harvester Co. Batavia, NY, later Massey-Harris) - - 14.5" (long variation). Good+ with some edge damage. (R1-272)

Choice Box 075: Lot of Six Farm Type Wrenches
(1.) B (orphan) - - 6.5" odd oe by hook spanner. Light pitting
(2.) B55 (orphan) - - 7.75". Pitted.
(3.) P. P. Co. (Pattee Plow Co - Monmouth, Illinois) / 100 V - - 7.75". Excellent.
(4.) Unmarked (orphan) - - 9" silo type wrench. Excellent.
(5.) 13 (orphan) - - 8" with hammer poll. Looks like Sears wench. Good. (see R1-417)
(6.) Unmarked (orphan) - - 8.25" odd ball with six openings, center ridge on one side and flat other side. Severe pitting.

PiCs Choice Lots 74 and 75

Choice Box 076: Lot of Six Farm Wrenches
(1.) GRB125 - - 6". Looks identical to a wrench drawing in a Fairbanks-Morse Parts Lists for their Eclipse Gas Engines. Medium pitting.
(2.) 1AA (Brown-Manly Plow Co. - Malta, Ohio). - - 6.5". Excellent. (R1-66)
(3.) Unmarked (No. 1047 Peoria Drill & Seeder Co. ) - - 7" thick, heavy cast wrench. Excellent. (R1-376)
(4.) G70 (Madison Plow Co. later Fuller & Johnson) - - 7.25". Good+. (R1-305)
(5.) 884 (Frost & Wood) - - 4.75" open end and pitman wrench. Excellent. (R1-188)
(6.) 610 (Grand Detour) - - 6.5". Poor, severe pitting. (R3-94)

PiCs Choice Lots 76 thru 78

Choice Box 077: Lot of Six Farm and Adjustable Wrenches
(1.) B14 (orphan) - - 6" garden cultivator type with hammer head, solid shaft variation. Excellent.
(2.) THE ELGIN - PAT JUNE 8, 97 (on wrench shaft) - EXTRA JAW 25¢ (on upper jaw) - - 7" adjustable alligator wrench. Fair. (S35)
(3.) AJAX & / SUPERIOR (Rock Island Plow Co.) - - 9" shorter variant. Pitting. (R1-401)
(4.) 3 (Kingman Plow) - - 8". Listed in Rathbone as Kingman Plow Co. wrench but not the wrench shown in Kingman Parts Books. Good+. (see R1-284)
(5.) Unmarked (orphan) - - 8.75" with five openings. Pitting.
(6.) Unmarked (orphan) - - 8" with six openings. Pitting.

Choice Box 078: Lot of Six Farm , Etc. Wrenches
(1.) SAMSON LEVER JAW WRENCH - PAT APPL'D FOR - MADE IN USA - - 9.5" Vise Grip type locking pliers made by the Metal Engineering Co. of Chicago and Plano, Illinois. Replaced rivets.
(2.) Unmarked - - 10.25" universal drain plug wrench with 15 functions. Excellent.
(3.) Unmarked - - 7.75" buggy wrench. Pitting.
(4.) M182 / P (Litchfield Mfg. Co. - Waterloo, Iowa) - - 9". Light pitting.
(5.) Unmarked (like New Idea Spreader Co. - Coldwater, Ohio L140 wrench) - - 8.75". Good+. (see R1-349)
(6.) 28 (orphan) - - 9.5". Neat looking wrench with some pitting.

PiCs Choice Lots 76 thru 78

Choice Box 079: Lot of Seven Wrenches - Several Types
(1.) Unmarked (John Deere?) - - 7.5" hitch pin with original green paint. Excellent.
(2.) AMERICAN SAW CO. - TRENTON NJ -- ALLIGATOR PAT / 1 - - 5.5" single ended alligator wrench. Design patent was granted to Samuel T. Freas of Trenton, N. J. ON AUG. 3, 1897. Good+ with some weak markings. *PAT*
(3.) 46CL - Case Eagle logo (Case T. M. Co.) - - 8" by 8.5" Tee socket wrench. Excellent. (R1-82)
(4.) Unmarked (orphan) - - 9" odd ball. Excellent.
(5.) 452 (orphan) - - 14.5" big wrench with large bold markings. Good++.
(6.) THE H .D. SMITH & CO - PERFECT HANDLE - PAT'D OCT. 30, 1900, JAN. 15, 1901, FEB 26, 1901. - -108" wooden knife handled monkey wrench. Good+ with some hammer damage on one edge.
(7.) TRI-SURE - NEW YORK / ("A" and "F" logo)- - 12" universal barrel bung wrench? Excellent.

Choice Box 080: Lot of Seven Farm Wrenches
(1.) 285 / (odd "C" and ? logo) (Valle & Kimes, Dayton, Ohio) - - 4.5". Excellent.
(2.) Unmarked (orphan) - - 8.75" odd ball tee wrench. Excellent.
(3.) 10 (Empire Plow Co. - Cleveland, Ohio) - - 6" Plant Jr. garden cultivator type. Severe pitting. (R1-166)
(4.) CASE W7660S - MADE IN USA - - 10.25" flat steel doe. Good+.
(5.) P & O CO - CANTON ILL / 2715 - - 9.5". All markings raised variation. Good+.
(6.) 1126A (Moline Plow Co) - - 6" by 10.5"" tee socket wrench. Good+. (R1-332)
(7.) IHC logo 1326E - - 7" s-doe. 3/4" by 7/8", all markings raised and in indentions variation. Excellent.

PiCs Choice Lots 79 & 80

Choice Box 081: Lot of Six Mixed Farm and Adjustable Wrenches
(1.) FORD (in script on top of top jaw) MOORE DROP FORGING CO - SPFLED, MASS. - - 9" automobile type adjustable wrench. Good++.
(2.) Billings & Spencer CO. - HARTFORD, CONN with "B" in a triangle logo / C. F. BILLINGS - PAT. FEB 18th, 1879 - - 4.25" early bicycle or pocket wrench, both sides solid variation. Good++. *PAT*
(3.) DELAVAL - - 7.75" OE with spanner pegs. Good+.
(4.) 1001 (orphan) - - 55" oe by two prongs Odd Ball., Overall light pitting, not cleaned as found.
(5.) 1214 (orphan) - - 7.75" Odd Ball. Good++.
(6.) R197 (McCormick / IHC) - - 8.25". 1' by 3/4" openings variation. Good++.

Choice Box 082: Lot of Seven Farm and Adjustable Wrenches
(1.) GRANITE STATE LAWN MOWERS - HINSDALE, NH - - 4.5" flat steel with three openings. Good++. (R2-117)
(2.) >A944 (Superior Drill Co) - - 5" by 6.5" combination tee socket with screwdriver and hook ends. Excellent, weak markings as usually found. (see R1-446)
(3.) U. S. WRENCH CO. - BOHN QUICKFIT - PAT '24 - PHIL. PA - - 5.75" wedge adjust nut wrench. Patent was issued to George Bohn and Fred Werner of Milwaukee, Wisc. on Jan. 22, 1924. Good++ with most of the original nickel finish. (S547, C308) *PAT*
(4.) 271N / (IHC logo) - - 6" x 6.5". Tee socket wrench. Excellent.
(5.) PLANET JR. / 3 - - 6.25" CUTOUT letters with hammer poll. Excellent with new paint.
(6.) 2766 (Orphan) - - 5.75" by 8.5" tee socket wrench. Good++.
(7.) A23 / <M-H> (Massey-Harris) - - 5.5". Excellent. (R2-180)

Choice Box 083: Lot of Six Farm and Adjustable Wrenches
(1.) S-1 (Milwaukee / IHC) - - 7.25". Markings indented on small end with dash variation. Good++ with weak markings as usually found. (R1-328)
(2.) A. G. COES & CO. WORCESTER, MASS / PAT'D - DEC 26, 71 (steam engine governor logo) - - 8" Coes wooden handled jog bar monkey wrench. Good+. (Unlisted marking variant with front marked like HP21 and back marked like the front of HP20) *PAT*
(3.) >8B (Orphan) - - 6." odd ball propeller type wrench. Flat one side, center ridge on other side, Excellent.
(4.) S. B. C. P. CO. (in logo) (South Bend Chilled Plow Co.) / 379 - - 9.25" with hammer head. Good++ with weak logo markings as usually found. (R1-429)
(5.) L299 with a double diamond logo (New Idea Spreader Co. - Coldwater, Ohio) - - 9". Good++. R1-349)
(6.) ZA810 / IHC logo (IHC, originally McCormick) - - 9.25" pitman wrench. Horizontally part number indented and IHC logo raised variation. Good++.

PiCs Choice Lots 81-83

Choice Box 084: Lot of Six - Five Farm Wrenches and
(1.) F103 (orphan) - - 6.25"small buggy wrench. Good+.
(2.) THE H .D. SMITH & CO - PERFECT HANDLE - PAT'D OCT. 30, 1900, JAN. 15, 1901, FEB 26, 1901. - - 8" wooden knife handled monkey wrench. Good.
(3.) Eberhard's "E" in a circle logo - -8.25" buggy wrench. Good, grind marks on one end.
(4.) Unmarked - -9.5" odd ball sometimes found marked Buckeye Wrench. Good.
(5.) BARCALO - 6 / BUFFALO - 6 - - 6" curved handle Crescent type with open handle. Good+.
(6.) 918 (Delaval Cream Separator) - - 7.75". Good. (R1-141, R2-77)

Choice Box 085: Lot of Six - Five Farm Wrenches and One Screwdriver
(1.) Unmarked (IHC No. 2588T) - - 7.75" screwdriver. (R1-253)
(2.) QUALITY (can't read rest of the markings) - - 11" older style claw hammer. Pitting and chipped handle end.
(3.) Unmarked (The Coleman Lamp and Stove Co. Universal Wrench) - - 4" flat steel.
(4.) CASE 031W - MADE IN UJA (Case Threshing Machine Co.) - - 11.5" flat steel. Good++.
(5.) B (orphan) - - 8" with pitting.
(6.) 2340A / PATD (Eberhard ?) - - 10.5" farmer's style S-Wrench. Good.

Choice Box 086: Lot of Six Farm Type wrenches
(1.) 340 / W (orphan) - - 10" buggy or wagon wrench. Good++
(2.) 7315D (Eberhard's "E" in a circle logo / PATD - - 9.5" buggy wrench. Good+.
(3.) 7321D / PAT APR 28 1903 (Eberhard Mfg. "E" logo ) - - 9" buggy wrench . Pitted, nut holder part missing, not all markings readable.
(4.) W1795 / E-B logo (Emerson-Brantingham ) - - 9.75". Good+. (R1-162)
(5.) STANDARD (Standard Garden Tool Co. - Montrose, Iowa) - - 6.25" garden cultivator type, side opening variant. Excellent. (R1-435)
(6.) EMERSON - - 10". Good++.

PiCs Choice Lots 84-86

Choice Box 087: Lot of Seven Farm type wrenches - All Painted Red with Markings Highlighted
(1.) INTERNATIONAL HARVESTER CO / PAT SEP 7 97 - - 9" Vandegrift cast monkey wrench. Small letters variation. Pitted, adjusting knurl frozen. (R1-256)
(2.) 5E / 7-1/2E (IHC logo) (IHC part 8E or 13071D) - -11.5" loop handle variation.
(3.) 5E / IHC logo (IHC part 8E or 13067D) - - 11.5" monkey wrench, solid handle variant. Some pitting under the paint.
(4.) "EASY" NO. 2. (H. K. Porter) - - 6.75". Special cast wrench for H. K. Porter Bolt Cutters.
(5.) H / H (Badger Cultivator - Council Bluffs, Iowa?) - - 1025" with a hammer poll. (R1-37)
(6.) STANDARD (Standard Garden Tool Co. - Montrose, Iowa) - - 6.5" garden cultivator type, side opening variant. Excellent. (R1-435)
(7.) 5E / IHC logo (IHC part 8E or 13067D) - - 11.5" monkey wrench, solid handle variant. Excellent.

Choice Box 088: Lot of Five Farm Wrenches
(1.) Unmarked 81 (orphan) - - 5.5" x 10" cross shaped oddball. Good+, some light pitting, (pictured at R1-504, oddball page)
(2.) 479 (oddball orphan) - - 7.75" x 12" unusual tee wrench similar to Moline B355 and Madison Plow / Fuller & Johnson 2H. Good+.
(3.) Unmarked (orphan) - - 7.5"by 11.75" odd offset tee socket wrench. Excellent.
(4.) 106S (Papec, Shortsville, NY) / "M" in a circle logo - - 6" x 13.5" tee socket wrench. Excellent. (R1-368
(5.) 4359 (P & O - later IHC) - - 12.5". Some edge damage, painted. (R1-370)

PiCs Choice Lots 87 and 88

Choice Box 089: Lot of Six IHC Wrenches, etc.
(1.) 131L - IHC logo - - 14" by 7.5". Tee socket wrench. Excellent.
(2.) G261 - IHC logo / MOWER - - 7.25" pitman wrench. Good, some light pitting.
(3.) 12737DA IHC logo (IHC) - - 5.5". Very small logo variant. Good++.
(4.) P1184 (IHC logo) (IHC, originally Osborne) - - 9.5" by 11.75" Tee socket wrench. Good+ with some pitting.
(5.) M231 - - 6.25" open back, solid bar variation. Excellent.
(6.) VB624 / IHC logo - - 8.5" binder crank and wrench. shorter with all markings raised variant. Excellent.

Choice Box 090: Lot of Six IHC Wrenches
(1.) P1599 - (IHC logo) - - 7" by 12" Markings on one side only, all markings raised variation. Excellent.
(2.) R197 (McCormick / IHC) - - 8.25". Modified jaw.
(3.) Unmarked (IHC No. H3769M) - - 17.5". Threshing machine cylinder wrench. 3/4" box end opening variation. Good++.
(4.) IH logo - 1-5/16" - 373941R2 - - 14.75" single12 point box end. Excellent, most of the original finish.
(5.) Unmarked (IHC No. 23966D) - - 21" with 1-3/8" hex socket. Good++.
(6.) G3866 - IHC logo - - 14.5" double open ended S-wrench with logo first variation. Excellent.

PiCs Choice Lots 89 and 90

Choice Box 091: Lot of Six Farm and Automobile Wrenches
(1.) M23 (orphan) - - 6" garden cultivator type. Excellent
(2.) CHAIN BELT CO. - 7/16 / MILWAUKEE WIS. - - 7.5" silo wrench type. Excellent. (R1-92)
(3.) HERBRAND - MADE IN USA - NO. 194 / 8742 - - 9" universal drain plug wrench with seven functions. Excellent.
(4.) ATCO MOSSBERG CO. - ATTLEBORO MASS USA - 748 - - 11" universal drain plug wrench with eight sizes. Excellent.
(5.) OP123 (Orphan) - - 8". . the "OP" prefix suggest an Osborne/IHC/Emerson wrench but no proof has been found. Good+.
(6.) 2 (raised) 114 (indented) (orphan) - - 10.25" Good+.

Choice Box 092: Lot of Six Adjustable and Bicycle Wrenches
(1.) B & C / 6 IN. - (Bemis & Call, Springfield, Mass.) - - 6" curved handle Crescent type . Open handle variation. Good++.
(2.) STEWART HOG RING CO. . STEWART HOG RING CO. - - 7" HOG RING PLIERS. Excellent New Old Stock, like new.
(3.) P. S. & W. CO. (Peck, Stow & Wilcox) - CLEVELAND O. - USA - - 6.25" Coes type wooden handle monkey wrench. Good+.
(4.) MUSSELMAN UNIVERSAL BICYCLE WRENCH - USA - - 6" flat steel with six different wrenches including a spanner. Good+. (S1064)
(5.) THE VICTOR - -PAT MAY 26 03 / FORGED HIGH GRADE STEEL - - 7" adjustable alligator wrench patented by Charles Bonney of Portsmouth, Ohio on May 26, 1903 and made by the Kraeuter & C0. of Newark, New Jersey. Marking variation not seen before, no hang hole variation. Good.(S37) *PAT*
(6.) BMC MFG. CORP. - BINGHAMTON, NY - PATENT APPLIED FOR - - 7" Locking Pliers. Patented Feb. 19, 1946 by Francis Snell of Chenango Forks, NY. Good++. (S278)

Choice Box 093: Lot of Six Adjustable and Farm Type Wrenches
(1.) Unmarked (orphan) - - 4" older clevis with screw pin. Excellent.
(2.) Unmarked (orphan) - - 5.5" by 4.5" handled cross style wrench. Excellent.
(3.) GELLMAN WRENCH CORPORATION - CHICAGO, ILLINOIS Polly - / DROP FORGED STEEL - PATENTED-APR-17, 1923 - 9 INCH - NO. 91 - - 8.5" quick adjusting wrench. External spring variation. Good++. *PAT*
(4.) 9 IN AUTO - - 9" Ford style adjustable wrench. Excellent.
(5.) 4106 with a dot in a circle logo (Massey-Harris, earlier case Plow) - - 8" with hammer head. Excellent. (R1-311)
(6.) PR40 (Sattley Mfg. Co. - Racine, Wisc. and Moline Plow Co) - - 10.5" with a hammer head. Excellent. (R1-333, R1-413)

PiCs Choice Lots 91 thru 93

Choice Box 094: Lot of Six Silo and Other Farm Wrenches
(1.) TWIN CITY TANK & SILO CO - 5/8 (indistinct markings) / MINNEAPOLIS MINN - 1/2 - - 10" silo wrench. Small letters variant. Good. (R1-461
(2.) CHAIN BELT CO. - 1/2 / MILWAUKEE WIS - - 8.75". Excellent. (R1-92)
(3.) OSBORNE logo / P167 (later IHC) - - 9.5" x 11.5". Tee socket wrench. Excellent.
(4.) WORTHINGTON - 2-1/2 (Worthington Pump Co. - Brooklyn, NY) - - 7.25". Worthington made steam pumps. Good with pitting. (R1-498)
(5.) DEERING (in ledger plate logo) D736 (William Deering & Co. later IHC) - - 5.5" oe and pitman wrench. Good with some pitting.
(6.) 2155 (No logos) (Champion than, IHC, B. F. Avery) - - 10". Good+.

Choice Box 095: Lot of Seven Small Farm, Etc. Wrenches
(1.) P52 (Whitman & Barnes Garden Cultivator) - - 4.25" with open shaft. Excellent. (not in Rathbone, ID from parts list.
(2.) T560 (Kentucky Drill, Hoosier Drill and IHC) - - 5" by 5.5" tee socket wrench with pry bar end. Good+. (R1-239, R1-255)
(3.) K4 (Dille & McGuire, Richmond, Indiana) - - 4.25". Small single open end with pointed end. Listed in Simmon's Catalogs for their KeenKutter lawn mowers made by Dille & McGuire. Excellent.
(4.) K121 (Gale Plow Co. and Ohio Rake ) - - 3.25" by 5.25" tee handled socket wrench. Excellent. (R1-193, R1-359)
(5.) Unmarked (orphan?) - - 5.25" doe-s with factory hole. Excellent.
(6.) N478 (no IHC logo) / H - - 3" x 5.5". Number raised, Excellent. (R1-254)
(7.) DEERING (in a ledger plate logo) - D736 (William Deering later IHC) - - 5.25" pitman wrench. Pitted. (R1-139)

Choice Box 096: Lot of Six Adjustable Wrenches
(1.) BOOS TOOL CORP - CHROME MOLYBDENUM - K. C. , MO PATENTED - - 9" turn handle to adjust wrench. Scare large size with serrated top jaw and smooth bottom jaw variation. There are several variations of this wrench. Good+. (see S381)
(2.) BOOS TOOL CORP - PAT. PEND. K. C. , MO.-- - 7.75" turn handle to adjust wrench. Serrated top jaw and smooth bottom jaw variation. There are several variations of this wrench. Good+. (see S381)
(3.) THE ELGIN - PAT JUNE 8, 97 (on wrench shaft) - EXTRA JAW 25¢ (on upper jaw) - - 7" adjustable alligator wrench, no die holder variation. Fair, adjustment problem. (S35)
(4.) LIGHTNING WRENCH MADE BY HAMPTON MACH. & TOOL CO. (Easthampton, Mass.) - - 9.5" adjustable pliers type wrench with screwdriver on end. Excellent with usual weak markings. (S690)
(5.) BMC MFG. CORP. - BINGHAMTON, NY - PATEN T APPLIED FOR - - 7" Locking Pliers. Patented Feb. 19, 1946 by Francis Snell of Chenango Forks, NY. Good. (S278)
(6.) Unmarked - - 6" riveted sheet metal screw adjust nut wrench. Good++. (S99B)

PiCs Choice Lots 94 thru 96

Choice Box 097: Lot of Six Farm Wrenches
(1.) R28 (Champion, later IHC, later B. F. Avery) - - 8.5" with hang hole, numbers indented variation. Some pitting.
(2.) IHC logo G261 / MOWER - - 7.25" pitman with five other openings. Pitted.
(3.) V624 - IHC logo - - 9.5" binder crank and wrench. Rod type with logo, all markings raised variation. Excellent.
(4.) WOODS BROS SILO & MFG CO / THE HINGE DOOR SILO - - 8.5". Extended side variant. Good++. (R1-496)
(5.) GA246 - IHC logo - - 9.75" piston socket wrench, no IHC variation. Good++. (R1-253)
(6.) Unmarked (IHC 51298D) - 13.75" double ended socket. Excellent.

Choice Box 098: Lot of Farm and Adjustable Wrenches
(1.) Z435 - <M-H> / (raised dot) - - 8". Massey-Harris logo on front variation. Good++. (R1-312)
(2.) BOOS TOOL CORP - PAT. PEND - K. C. , MO.- . - - 7.75" turn handle to adjust wrench. Serrated top jaw and smooth bottom jaw. Light grind marks on jaw.
(3.) 8141 (Reeves & Co. - Columbus, Ind.) - - 5.75" x 12.5" steam engine? tee wrench. Good with former owner's ID "HST" ), markings have some damage. (R3-83)
(4.) 2 (raised) and 114 (indented) (orphan) - - 10.25"Fair with light pitting.
(5.) BOOS TOOL CORP - PAT. PEND - K. C. , MO.- . - - 7.75" turn handle to adjust wrench. Both jaws smooth variation. Good++.
(6.) IHC logo - G3526 - - 11.5". All markings raised. Pitting, poor markings.

PiCs Choice Lots 97 and 98

Choice Box 099: Lot Four Automotive Hubcap Wrenches
(1.) 15086 (orphan) - - 11.75" cast hubcap, etc. wrench. Excellent.
(2.) 3850 (Crow-Elkhart Motor Corp. of Elkhart, Indiana) - - 10"" cast hubcap wrench. Indistinct markings.
(3.) 4344 (Cole Motor Car Co. of Indianapolis, Indiana) - - 12 "cast hubcap, etc. wrench. Pitted. (ID from part list)
(4.) 2272 (orphan) cast hubcap wrench. Pitted.

Choice Box 100: Mixed Lot of Six Automotive Hubcaps and Farm Wrenches
(1.) Unmarked (Hudson and Essex) - - 12.75". Early pressed steel hubcap wrench. Good++.
(2.) Unmarked (S-1 - Milwaukee, later IHC) - - 7.25". Good++
(3.) 1474 (EMF/Studebaker) - - Early hub cap wrench. Excellent.
(4.) Unmarked (EMF/Studebaker) - - Like 1474 hubcap wrench above. Good++.
(5.) 106 (Moline Plow Co.) - - 8". Good++, blurry "6" number. (R1-332)
(6.) ZA810 / IHC logo (IHC) - - 9.25". Horizontally part number indented and IHC logo raised in indented circle variation. Excellent.

PiCs Choice Lots 99 and 100

End of cataloged lots. There may be additional unlisted lots

Back To The Wrenching News Homepage