Note: Internet Bidding Will be Available - Check Back Later for the Link

A printed Catalog with most of the wrenches pictured will be available for $20.00 and a Prices Realized List will be available for $5.00 after the auction (if you are an active bidder either in person or absentee you should be receiving a catalog). To order catalogs or for more information contact Don 'Bus: Haury: Email or phone: 316-284-7345#6. See The Wrenching News Homepage for updates and more information on the auction and Missouri Valley Club Meeting.


CATALOG OF WRENCHES for the Wrenching News
SPRING 2024 WRENCHING NEWS ANTIQUE WRENCH AUCTION

Antique Wrenches, Etc. from the collections of Dale Radiel of Sharon Springs, Kansas and Don Ervin of Surry, Maine

Friday April 12 and Saturday April 13, 2024

AUCTION STARTS AT 12:30 P.M. FRIDAY (approximately 1/2 hour after Wrench Club Meet ends)
AND AT 8:30 A.M. SATURDAY

AT THE YORK COUNTY FAIRGROUNDS CORNER STONE BUILDING - 2345 NEBRASKA AVE

Auction Conducted by the Green Auction Co. of York, Nebraska


York is located 40 minutes west of Lincoln. 90 minutes west of Omaha and 60 minutes east of Grand Island
(two miles north of I-80. Exit 353)


Rare and Unusual
Farm Wrenches - Early Adjustable Wrenches - Bicycle Wrenches - Buggy & Wagon Wrenches
Rare & Odd Combination Tools Some with Hammers, Hatchets, Corkscrews, Can Openers, Wire Cutters, Etc.
Cigar Box Openers - Several 4" Crescent Type Wrenches - 3 Boot Jack Wrenches - Odd Balls - Automotive & Motorcycle Wrenches
Rare Alligator Wrenches - Neat Blacksmith Made Wrenches - Wire Fence Tools - Implement Seats and Tool Boxes - Implement Clevises
Complete Set of Winchester Monkey Wrenches

The Spring Wrenching News Antique Wrench Auction will be held after the Missouri Valley Wrench Club Spring Meet in York, Nebraska. This year's auction has wrenches form the collections of Dale Radiel of Sharon Springs, Kansas and Don Ervin of Surrey, Maine.



This year Glenn Lofdahl has photographed and cataloged Dale Radiel's farm wrenches and other farm related items and Don Haury has done Don Ervin's mostly adjustable wrenches.

Dale Radiel had a body repair shop and farmed in Sharon Springs, Kansas He said he has been interested in old wrenches since he was in High School and was buying them at farm auctions in the1960's when they would go for less than a dollar a bucket full. He began to collect wrenches more seriously around 2001 after selling his lambs because he thought nobody else collected old wrenches. In 2001 he joined the Missouri Valley Wrench and attended most of the meets and auctions since then. He is keeping his extensive IHC collection and thinning down the rest.

Don Ervin has been collecting wrenches for around thirty five years and attended most of the major wrench meets and auctions during that time and amassed a large collection of rare and unique wrenches. He is also an accomplished machinist and restorer. He has made from scratch several wrenches that aren't know to have been made using the patent drawings This is one of several auctions we have had for Don as he continues to down size his extensive collection. Many of Don's wrenches came from the collection of Herb Page which Don acquired several years ago and are so noted in the descriptions.

Absentee Bids Contacts
Don 'Bus' Haury
7913 SW 24th - Halstead. KS 67056
316-284-7345
donhaury@southwind.net 		Glenn Lofdahl
2316 V Road - Strong City, KS 66869
620-340-3896
glennlofdahl@yahoo.com

Absentee bid policy:
Absentee bids may be submitted by mail. email or phone. Bid by lot number with a statement of the maximum amount you wish to bid for each lot. Also please indicate if you are willing to go "one increment higher" if your high bid is taken on the floor. Your bid will be entered competitively at one bid increment over the next highest bid or 50 per cent of your maximum bid. whichever is higher. Thus you may purchase your item for less than your maximum bid. A 5% handling charge (minimum of S3.00) will be added to the selling price of winning absentee bids, plus shipping. insurance and sales tax if applicable. If insurance is not purchased we will not be responsible for loss or damage. Don't be afraid to submit "low-ball" bids. You could win some bargains.

The box lots that will be sold choice wrench and absentee bids will be accepted on these items. Just give us the lot number and item number when submitting your bids. No internet bidding on the box lots.

Please include your phone number or email address as all absentee bidders will be notified by phone or by email.

Terms of the Sale:
All payments in U.S. currency or check with proper identification. No items to be removed until settled for. The Wrenching News. auctioneers and the consignors shall not be responsible for any accident or loss. Sold as is with no guarantees or warranties expressed or implied. Statements made sale day will take precedence over any printed advertisement. No credit cards.

To view individual or group pictures click on the PiC or PiCs logos in the listings.

To view all pictures on one page  Click Here
If you don't have a fast connection you will probably have to refresh the page a few times)

To see patent information click on the PAT. logo in the listings.
Patent information is from the DATAMP - Directory of American Tool & Machinery Patents or Google Patents if the patent is not listed on DATAMP.

Book References
C-page No. - KENNETH COPE'S "American Wrench Makers 1830 - 1930"
DC-item No. - Dan Chopiak's "John Deere and Merged Companies Wrenches and Tools"
Lofdahl - Glen Lofdahl's "International Harvester Tool List"
HP-page No. - HERB PAGE'S "The Brothers Coes and Their Legacy of Wrenches"
RC-volume No.-page No. - Ron Geesin's "The Adjustable Spanner" Volumes 1 and 2
S-item No. - ALFRED SCHULZ'S "Antique and Unusual Wrenches"
Smith-item No. "Collectors Guide for Fencing Tools" by Richard Smith & Richard Smith Jr.
R-volume-page No. - P.T. RATHBONE'S "The History of Old Time Farm Implement Companies and The Wrenches They Issued" Volumes One thru Four

A WORD ON CONDITION: Because of the character of their use and storage wrench condition can hardly be judged to the same standards as other tools. I try to use the broad categories of condition: Poor. Fair. Good. Good+. Good++. Excellent. and Excellent. like new. I also try to note all faults such as missing parts. cracks. pitting. over cleaning. repairs. etc. Likewise the wrenches in this auction that are in exceptional fine or excellent condition have been so noted. even a common wrench that has survived the years in almost unused condition is a rarity. Both Herb Page and Don Ervin are experts at restoring old wrenches and so most of Don's wrenches in this auction have been restored including if needed: mechanism repaired, sprung jaws aligned, new handles made and metal parts refinished.

Other info:
* Measurements are usually rounded off to the nearest 1/4".
* The markings on the wrenches are in all capital letters.
* a / separates markings on one side of the wrench from the other side.
* If a wrench is misnumbered in a photo the description number will prevail.
* To search for a particular wrench or company (for example IHC. Deere. Coes. adjust etc.) use the find on this page in the edit menu. I have tried to list the company or companies associated with each wrench.

Order of Sale:
Friday: All the box Lots (no internet bidding on the box lots)
Saturday: All the Individual Lots Starting with No. 1 (both live and internet bidding on these lots)

Auction Catalog and Prices Realized List:
A printed catalog and post auction price realized list will be available. See contact information for Don "Bus" Haury.

For more information on the Wrench Auction and the Missouri Valley Wrench Club Meet see

The Wrenching News Home Page

This auction catalog was compiled and the website is hosted by Don "Bus" Haury.
Any questions or comments please email Bus or phone 316-284-7345.


*****************************
List of Wrenches
The Wrenching News Spring 2024 Antique Wrench Auction

April 12 and 13, 2024 at York. Nebraska

0001. IMPROVED WRENCH - NY / PATENT - APPLIED FOR - - 8" Taft's Railroad and Mowing Machine type wood handled monkey wrench. rare marking variation. Ex Herb Page collection. Good+

0002. Lot of Two:
(1.) W. G. COE? - WARRANTED - - 8" Coes type monkey wrench. Unknown manufacturer, Don suggests W. G. Coe, Province, RI. Also a Wm G. Coe is listed as the treasurer of the Clifton Mill Co. of Winsted Conn. Good+ with light, incomplete markings, tight handle crack, previous owner's stamped initials "WHP".
(2.) Unmarked - - 11. 5" Coes type monkey wrench that may also be a W. G. Coe like above. Good++.

0003. Unmarked - - 8" all cast neat combination tool with a large open end, pliers, nail claw and a hammer head. First one seen. Excellent.

0004. PAT'D. NOV. 2, 80 (Thompson's patent) - - 12" wood handled adjustable buggy wrench, double end variation with buggy and nut wrench jaws. Patented by H. A. Thompson of Farmington, Maine. Good++. (C117, see S204) *PAT*

0005. DEERING - - 10". all metal Coes type monkey wrench with an oil can inside the hollow candle. Modified from a wood handled Coes type monkey wrench with the Deering imprint by Don Ervin based on Henry Hunt and Henry Hunt, Jr.'s (of Wilkes-Barre, Penn.) Aug. 18, 1896 patent. Unique one of a kind wrench with oiler. Excellent. *PAT*

0006. R. R. ROUSE MFG CO. - INDIANAPOLIS - PAT. APRIL 21, 1868 - JULY 10, 1882 / TOOLSTEEL - - 12" single jaw variant center screw adjust pipe wrench. Patents granted to Ira Morse of Danbury, Conn. and John E. Sanders of Indianapolis, Ind. Good+ with a replacement square nut on the handle end. (S618, C270) *PAT* and *PAT*

0007. ED. P. JONES / NO. 2 - PAT. DEC 5, 1893 - - 12.75" adjustable nut wrench with a set screw that adjusts the spring loaded moveable jaw. Made by Edward P. Jones of Philadelphia, Penn. and later by Bonney Vise & Tool Works also in Philadelphia. Only second one we have listed. Good++ with extra large, strong markings. (S400, C185) *PAT*

PiCs Lots 1 thru 7

0008. Unreadable markings - - 10" all metal self adjust wrench . From an April 1869 article in the American Artisan magazine: Wrench has been in use for many years in France and comes with each velocipede made by Michaux of Paris France. An August 27, 1862 German patent looks like this wrench. Light pitting.

0009. Lot of two:
(1.) THE LAMSON & SESSIONS CO. - - 8" wood handled monkey wrench. Ex Herb Page Collection. Excellent. (C197)
(2.) THE B. & S. CO. HARTFORD, CONN. - PAT'D NOV. 14, 1905 - - 6" curved handle Crescent type with the patented jaw lock feature. Patent was issued to William R. Tomlinson of Hartford, Conn. Excellent 6" example of a scare Billings & Spencer wrench. First 6" size we have had to offer. *PAT*

0010. FUNT'S PATENT NO. 12331 - - 5" sliding shim type nut wrench similar to the Indianapolis Wrench & Stamping Co wrench. No. 12331 refers to a British patent issued to J. P Funk on June 5, 1896. Wrench was produced by the Novelty Rack Company of London, England. Good++. (RG1-128) *PAT*

0011. ATLIN & SONS - BENEFASCTUM (in logo) - - 8.25" all metal English type single jaw coach wrench with hammer head and octagon handle. Good+ with some dents. (not listed)

0012. S. MERRICK - PATENT / AM ??? SCREW (American Bed Screw Co. - New Britian, Conn.) - - 12" Taft style Railroad & Mower Machine Wrench evolved from Merrick's Aug 17, 1835 patent. Ex Herb Page Collection. Good++, top handle ferrule has some dents.

0013. MERRICK'S PATENT - SPRINGFIELD- - 12" wood handle threaded shaft center screw adjust nut wrench. This is the first American screw wrench, patented August 17, 1835 by Solyman Merrick of Springfield, Mass. and manufactured by Stephen Bemis in Springfield and others. Good++ with weak but readable markings. Ex Herb Page Collection. (S832, C61) *PAT*

0014. Unmarked - - 12" all metal English type turn handle to adjust nut wrench with a hammer head and octagon handle. Excellent.

0015. S. E. & CO. / FENN (Joseph Fenn, London) - - 12" all metal turn handle to adjust English type single jawed coach wrench with octagon handle. Good++. (RC1-94, RC2-52)

PiCs Lots 8 thru 15

0016. Unmarked but same wrench are marked: "BORNSTEIN'S IMP WRENCH - PAT. AUG. 26, 1890" - - 8.25". Turn the wood handle to adjust nut wrench with patented double screw action for fast adjustment with a locking collar. Advertised as Bornstein's Improved Patent Vise Wrench by American Improved Wrench Co. of Boston, Mass. and patented by Henry Bornstein of Boston. Good++, small piece missing from wood handle, former owner's stamped Initials "RFH". (S367) *PAT*

0017. DURANTS PATENT - - 10" all steel, curved handle, open end wrench with a sliding shim adjustment. English patent granted to William Durant on July 18, 1893. Rated as very rare in Ron Geesin;s book. Ex Herb Page collection. (RG1-84)

0018. C. G. TAFT - IMPROVED WRENCH - NY / PATENT - APPLIED FOR - - 10" Taft's Railroad and Mowing Machine type wood handled monkey wrench. rare marking variation. Good+, tight handle crack, former owner's stamped initials "JHB".

0019. COES PATTERN - LANDERS, FRARY & CLARK (of New Britain, Conn.) - - 10" Coes type wood handled monkey wrench. Ex Herb Page Collection. Good++.

0020. 10" UNIVERSAL - DROP FORGED STEEL (with a "UW" in a circle logo) / UNIVERSAL WRENCH CO. - DETROIT - WINDSOR - PAT'D 6-3-19 - 7-22-19 - - 10" Crescent type with a lever to release the adjusting jaw to allow for a ratcheting action. US patent (No. 1,305,628) was granted June 3, 1919 and a Canadian patent on July 22, 1919 to Roland John Statham of Vancouver, British Columbia Canada. Excellent. (S530T) *PAT*

0021. Unmarked - - 7" all metal screw adjust nut wrench, adjusted with a small crank on the end of the handle. Looks like an one off shop project or prototype but another has been seen. Excellent, like new. (unlisted, no info found)

0022. COMET NO 2 - PAT JAN 27 1903 / H. W. & M. CO. (Hilts Wrench & Machine Mfg. Co.) - RICHFORD NY - 10.25" quick and screw adjusting nut wrench. Patented by Jacob L. Bovee of Richford, New York (Pat. No. 719,299). Good+. Ex Herb Page Collection. (C167) *PAT*

0023. EVERREADY - 5 / 4 REGI. - - 10" all metal self adjusting nut wrench. Rare, first one I have seen. Excellent like new condition. (not listed, no info found)

PiCs Lots 16 thru 23

0024. ROBINSON PATENT - JUNE 16, 1885 (also D & T stamped several times)- - 15" with adjusting screw supporting ferrule. Patented by Squire Robinson of Southington, Conn. Good++. (S413) *PAT*

0025. BEMIS & CALL COMPANY - SPRINGFIELD, MASS. MADE IN USA / B & C logo and B & O RR (Baltimore & Ohio Railroad) - - 12.5" all metal nut wrench with a hex adjusting nut. Ex Herb Page collection. Excellent, like new.

0026. BEMIS & CALL COMPANY - SPRINGFIELD, MASS. MADE IN USA - - 15" modified Coes type nut wrench with a flat knife type wooden handle and single piece handle frame. Also has a reinforcing piece between the upper and lower parts of the lower jaw assembly. Don't think I have seen this one before. Good+ with former owner's stamped initials "WS". (unlisted, no info found)

0027. BEMIS & CALL CO - SPRINGFIELD, MASS - PAT AUG 1866- - 15.5" pipe wrench with threaded shaft and long threaded sleeve with five rings. Patented by Amos Call of Springfield, Mass. on Aug. 28, 1860 (Patent No. 57,621). Good+. (S833 and S835) *PAT.*

0028. WORCESTER TOOL CO. / WORECESTER, MASS / PAT'S OCT. 16, 1860 - - 15" early George Taft patented wrench with an unusual double screw adjust nut wrench. Rare wrench especially in this size. First we have had to list. Good++ with minor dents and former owner's stamped initials "HG" (see S387 for same wrench made by Dodge & Wellington, C119) *PAT*

PiCs Lots 24 thru 28

0029. L. COES & CO WORCESTER, MASS / L. COES PAT'D JUNE 26, 1866 - MAR 23, 1869 (both are George Taft patents with the locking nut inside the handle ferrule) - - 18" First model Loring Coes produced after the breakup of L. & A. G. Coes. Good+ with a replaced cocobolo wood handle. From Herb Page's collection . (HP26)

0030. ROBINSON PATENT - JUNE 16, 1885 - - 18" with adjusting screw supporting ferrule. Patented by Squire Robinson of Southington, Conn. Good+, some minor nicks. (S413) *PAT*

0031. FASTFIT PAT. (Fastnut LTD -London, England) - 18" Heavy duty all metal self adjusting nut wrench similar to the Cochran wrenches. First one to list in this large size. Good+, couple minor nicks. (smaller ones at RG93)

0032. PATENT APPLIED FOR / WORCESTER (only "CESTER" is readable) - - 21". Same type wrenches have been seen marked Charles Spring & Co. of Worcester, Mass (Cope states Spring was listed as a maker of wrenches in 1852), and Harrington and Heald of Worcester and Wm H. Harrington also of Worcester. Patent if issued has not been found. Rare wrench. Good+ with some light pitting, couple minor nicks. Excellent replaced handle with a brass band. First one we have listed. From Herb Page's collection (see S395, C158, C159, C285)

PiCs Lots 29 thru 32

0033. L. COES & CO WORCESTER, MASS (George Taft Patent with the locking nut inside the handle ferrule) - - 15" like HP26 or HP27 but with no readable markings on back side. Good+ with some nicks. (se HP26 &: HP27)

0034. ASBURY RECD A1 WARRANTED (registered Feb 11, 1867 by Joseph Asbury of Birmingham, England) - - 14.25" all metal nut wrench with an unique adjustment screw. Good+

0035. Unmarked - - 11.5" adjustable nut wrench with a locking wedge and a wooden handle. First one I have seen. Good++. (not listed, no info found)

0036. Unmarked (looks like Taft's Railroad & Mower Machine wrench) - 14.25". Good++. (see S418)

0037. COLLINS & CO - HARTFORD - PATENTED - OCT. 10, 1865 - - 15" wood handled monkey wrench with distinctive hex handle ferrule and extended adjusting screw support plate. Patented by Leander E. Smith and Lucius Jordan both of Southington, Conn. Good++ with professionally replaced wooden handle. (S384) *PAT*

0038. THE LAMSON & SESSIONS CO. - PAT'D - CLEVELAND, O. / ENGINEERS - CASE HARDENED (Matthew Campfield's 5-9-1882 patent) - - 15" wood handled monkey wrench with extended ferrule shoulder that holds the adjusting screw (with ribbed knob) in place. Good+ with minor flaws on the handle. Ex Herb Page collection. *PAT*

PiCs Lots 33 thru 38

0039. RAILROAD SPECIAL MADE IN CANADA (with a thistle? inside a diamond logo. - MCKINNON 12" / MADE IN CANADA - - 12" all metal adjustable nut wrench with a Coes type adjustment. Made by McKinnon Industries Ltd., St. Catharines, Ont. Canada. Ex Herb Page collection. Good++. Check out Vanished Tool Makers for more info.

0040. Unmarked (Athol Machine Co - Athol Mass)- - 6" all metal comb. screw and quick adjust wrench with a spring loaded bar that releases the lower jaw from the screw threads. Patented June 8, 1889 by Stephen Bellows of Athol, Mass. and advertised as the "Rapid Transit Wrench". Good+. (S526, C46) *PAT*

0041. W & C - PATENT - NG19 - - 10.5" combination hammer screwdriver and rack type quick adjust wrench. Looks like Ezra Ripley's patent of April 7, 1857. Good+ with light pitting, weak markings. (RG1-162, see S823 &S824) *PAT*

0042. KEYSTONE MFG. CO. - BUFFALO, NY / PAT. NOV. 6, '83 - 3 PATS FEB. 10, '91 - - 9" adjustable jaw, reversible ratchet with V-notched buggy type jaws, complete with the drill bit adapter and feed nut. Patented by Charles H. Myers of Phelps, NY. and marketed as the "Nonpareil Ratchet Wrench". Good++. (S153, C189) *PAT*

0043. RIFLAW WRENCH CO. / ALL-PURPOSE WRENCH - - 9" Crescent type wrench with an adjustable pivoting head. Probably the rarest of the pivoting head Crescent type wrenches. First one we had had to sell. Ex Herb Page collection. Good+ with excellent markings. (see S118 for a similar wrench)

0044. COLLINS & CO - HARTFORD - PATENTED - OCT. 10, 1865 - - 12" wood handled monkey wrench with distinctive hex handle ferrule and extended adjusting screw support plate. Patented by Leander E. Smith and Lucius Jordan both of Southington, Conn. Polished metal with excellent wood handle. (S384) *PAT*

0045. BUFFUM TOOL CO (with two Swastika logos) / LOUISIANA, MO 6 IN - - 6" curved handled Crescent type wrench. Scarce brand Crescent type wrench. Ex Herb Page collection. Good++ with excellent markings.

0046. Unmarked - - 10.5" odd double ended adjustable nut wrench. A sliding bolt with wing nut adjusts both the large and small ends. Patented by Thomas McDonough of Montclair, NJ on Aug. 29, 1876. First one we have had to list. Restored with minor pitting. (not listed) *PAT*

0047. RICH-CON (in a diamond logo) RICHARDS & CONOVER HDW. CO. (Kansas City, Mo. hardware wholesaler) - - 8.25" wood knife type handled monkey wrench. Weak markings, tight handle cracks.

0048. Unmarked - - 9.25" early wooden handled ratchet wrench. Excellent except for area of pitting on ratchet gear mechanism. Ex Herb Page Collection. Patent not found. (S152)

0049. Unmarked - - 6.5" all metal center screw adjust nut wrench with a rivet fastened side plate. Similar to Randolph Hayden's June 15, 1880 patent. Ex Herb Page collection. Good++ with very light pitting. (S116) *PAT*

0050. WRIGHT WRENCH TRADEMARK (with logo) - TACOMA, WASH. / PAT'D MAR. 15, 1904 - - 8" wood handle quick adjust nut wrench. Rare wood handled model, most I have seen were all metal. Patent was granted to Lewis Ash and Hiram B. Stewart both of Hassel, Mont. Good++ with a "P" stamped over the makings. (wood handle model not in Schultz see S543 and C342) *PAT*

PiCs Lots 39 thru 50

0051. SATTLEY- type 1 cast iron seat with letters cut out in good shape

0052. WESTERN L ROLLER CO HASTINGS NEB - cast iron seat in good shape

PiCs Lots 51 and 52

0053. FULLER & JOHNSON MFG CO MADISON WIS - cast iron seat with letters cut out. It does have a crack on the side by S and the G is partially missing

0054. KINGMAN - cast iron seat type 1 with 4 on hump. Seat in good shape

PiCs Lots 53 and 54

0055. 36 - cast iron seat. Plano(Jones) has some pitting but no cracks

0056. H 115 - number on back cast iron seat. (John Deere) in good shape

PiCs Lots 55 and 56

0057. DODDS - cast iron seat with letters cut out type 2 . It does have a piece broken off on the left side

0058. CHAMPION - cast iron seat with number 731 on back, in good shape

PiCs Lots 57 and 58

0059. FURST & BRADLEY MFG CO CHICAGO ILL - cast iron seat in good shape with letters cut out

0060. No marked - cast iron seat in good shape. Number P 530 in the CISC book

PiCs Lots 59 and 60

0061. 18- cast iron seat with number in front, and in good shape. Number P 468 in the CISC book

0062. BUDLONG- cast iron seat with letters cut out, and in good shape. Type 3

PiCs Lots 61 and 62

0063. ACME NASH & BRO Millington NJ USA. - cast iron seat with cut out letters. The M in ACME and the A in Nash are broke out, type 1

0064. IHC 993 - cast iron header seat in good shape

PiCs Lots 63 and 64

0065. D 120 -- cast iron seat with number on the back (Jones) in good shape

0066. WEIR - cast iron seat with 4 on the center hump, in good shape

PiCs Lots 65 and 66

0067. SOUTH. BEND. CHILLED. PLOW. CO. SOUTH. BEND. IND.--cast iron seat with cut out letters, and in good type. Type 1

0068. HAPGOOD. PLOW CO. ALTON. ILL. - cast iron seat with cut out letters in good shape

PiCs Lots 67 and 68

0069. BUCHEYE AKRON - cast iron seat in good shape

0070. FORDSON - steel seat with a little bend in the top rim, otherwise in good shape

PiCs Lots 69 and 70

0071. THE JANESVILLE MACHINE CO JANESVILLE WIS- steel seat in good shape

0072. J I CASE PLOW WORKS RACINE WIS USA - steel seat with piece missing out of the center

PiCs Lots 71 and 72

0073. EMERSON NO 1- steel seat with small crack by bolt hole

0074. Not marked --- steel seat (IHC 488B)

PiCs Lots 73 and 74

0075. RP 256 -cast iron tool holder (Oliver- IHC)

0076. G 566- cast iron tool holder (Rock Island)

0077. L 568- cast iron tool holder (Rock Island)

0078. Not marked- cast iron tool holder (N 10 Rock Island)

0079. HF 20 with * - cast iron tool holder (Minneapolis Moline)

0080. HAPGOOD- cut out tool holder

0081. 604-JI Case tool holder

0082. A 24 -number very light, unknown mfg. tool holder

PiCs Lots 75 thru 82

0083. COLLINS - Cut out tool holder

0084. Not marked - tool holder with oil can holder with it

0085. AVERY 191 - tool holder with name impressed in it.

0086. CC 276 - tool box holder, mfg. unknown

0087. L 328 - Janesville tool holder

0088. PATTEE 277 - cut out tool holder

0089. PATTEE 276 - cut out tool holder

0090. A 900 - tool holder with oil can holder, mfg. unknown

PiCs Lots 83 thru 90

0091. 1681 - JI Case tool holder

0092. R 713 - Rock Island tool holder

0093. 300- tool holder mfg. unknown

0094. 146 - tool holder mfg. unknown

0095. HAYES - steel tool holder

0096. EMERSON - steel tool holder

0097. JOHN DEERE - steel tool holder

0098. Not marked - steel tool holder

PiCs Lots 91 thru 98

0099. RODERICK LEAN MANSFIELD USA - steel tool holder

0100. IHC S 1905 - steel tool holder

0101. SUPERIOR B 295 - cast iron toolbox

0102. FROST & WOOD SMITH FALLS CANADA- cast iron tool box lid

0103. V 135 - oil can holder, mfg. unknown

0104. S 169 - oil can holder, mfg. unknown

0105. Not marked -- oil can holder, mfg. unknown

0106. Not marked - big oil can holder, mfg. unknown

PiCs Lots 99 thru 106

0107. Not marked - IHC 407064 R91 tool box for 300, 350 utility tractor

0108. Not marked - John Deere B 4498 H tool box with oil can holder

0109. ACME - steel tool box for a grain binder

0110. FORDSON - steel tool box for a tractor

PiCs Lots 107 thru 110

0111. Not marked - IHC 407064 R 91 tractor tool box for H and M with light bar

0112. Not marked - John Deere tool box

0113. Not marked - John Deere tractor side mount tool box with mount inside

PiCs Lots 111 thru 113

0114. JOHN DEERE - plastic tool box

0115. Not marked - John Deere tractor tool box

0116. Not marked - IHC 362607 R 12 tool box for 400

PiCs Lots 114 thru 116

0117. Not marked - Steel fuel funnel, IHC number is 1131842-R1

0118. Not marked - Cast iron fuel funnel identified as Case

PiCs Lots 117 and 118

0119. Not marked - John Deere N 2328887 wrench looks like new

0120. Not marked - IHC 1307612 C1 combine cylinder wrench for a 1460 combine

0121. CARBON ARC TORCH - JOHN DEERE new in the box TY 2325

0122. 995225 R1 IH - brass fire extinguisher

PiCs Lots 119 thru 122

0123. Not marked - starting crank for M Farmall with mounted corn picker 18605

0124. Not marked - IHC wedge rear wheel tractor remover 536022 R 92

0125. WA 443 - IHC pulley

PiCs Lots 123 thru 125

0126. BEMIS & CALL H & T CO. - SPRINGFIELD, MASS - - 18" wooden handled nut wrench with long five ring adjusting sleeve. Advertised as "Briggs' Screw Wrench" (see Cope page 62). Patented by Albert D. Briggs of Springfield, Mass. on Apr. 26, 1859. Scarce size in Good++ condition. (S843) *PAT*

0127. HIBBARD - MADE IN USA - - 18" monkey wrench with knife type handle slabs sold by Hibbard, Spencer, Bartlett Hardware Co. of Chicago. The OVB (Our Very Best) company. Scarce large size in Good condition with pitting on one side.

0128. H. W. Hewet - PATENT - 1840 / E. F. DIXIE - WORCESTER, MASS - - 21" wood handled monkey wrench with a threaded adjusting tube. Patented by Henry Wheaton Hewet of New York, NY on Jun. 27, 1840. Rare, very early wrench patent that predates Coes 1841 patent for his monkey wrench. Seldom seen with the Dixie imprint (Dixie produced this wrench only from 1851 to 1854) and never seen before in this large 21" size. Some minor nicks, jaw edge mushrooming, minor handle crack, some weak markings but considering the age and rarity I would grade as Good++. (S431, S396, C118, C165) *PAT*

0129. COLLINS & CO - HARTFORD USA (also marked C. B. & O for the Chicago, Burlington and Quincy Railroad) - - 21" with distinctive hex handle ferrule and extended adjusting screw support plate. Patented by Leander E. Smith and Lucius Jordan both of Southington, Conn. on OCT 10, 1865 and assigned to The Collins Co. Ex Herb Page collection. Rare large size in Good++ condition with a replaced handle?. (S384) *PAT*

PiCs Lots 126 thru 129

0130. H & E WRENCH CO. - USA - NEW BEDFORD, MASS / PAT MAR 27, 1923, etc.(with HANDE logo) - REG. US PAT. OFF. - - 13.75" H & E's pipe wrench version of their Hande helical screw quick adjust wrenches. Patentees were Edwin J. Evans and George E. Hemphill both of Salt Lake City, Utah. Excellent, like new. (S675) *PAT*

0131. BEMIS & CALL CO. - SPRINGFIELD, MASS / NO. 2 - - 15.25" early adjustable pipe wrench with the short rather than long adjusting nut. Amos Call's patent of 8-28-1866 applies. Ex Herb Page collection. Beautiful old wrench with exceptional strong markings. (similar to S838) *PAT*

0132. BEMIS & CALL CO 12 / SPRINGFIELD, MASS (all in indented panels on the shaft) - - 12.75" combination nut & pipe wrench width Brigg's type four ring adjusting sleeve. Ex Herb Page collection. Excellent, off the hardware store shelf new. (like S843-top)

0133. Some of the markings are not readable but other seen have been marked TOWER & LYON - NEW YORK - PATENTED SEPT 25TH 1877 - MAR 1ST, 1881 - DEC 12TH, 1882 - Nov. 12, 1889 - - 15" Briggs's Pattern combination nut and pipe wood handled monkey wrench with a hex and long cylinder adjusting nut. Patented by Bernard Donahue of New York. Ex Herb Page collection. Good+++. (similar to S576) *PAT*

0134. GATES BOLT WRENCH / PATENTED - FEB 15, 87 - L. W. CO / WRENCH - - 18.5" all metal nut wrench with an unique adjusting screw on top of upper jaw. Patented by Alfonso D. Gates of Cleveland, Ohio and mfg. by the Lorain Wrench Co. of Lorain, Ohio AND ADVERTISED AS "Gates' Bolt Wrench". Only one I have seen in this large size. Has a hex adjusting knob instead of the round ones usually seen. Good+ with a tight crack on one side between the upper jaw and the shaft (S391) *PAT*

PiCs Lots 130 thru 134

0135. Unmarked (Palmer type) - - 12.25" heavy duty all metal nut wrench with long center adjusting Sleeve. Looks like a wrench made by Palmer & Sons of Birmingham, England. British patent of April 16, 1861 No. 4354 applies. Excellent, former owner's stamped initials "S.R. (S378, RG1-133)

0136. BEMIS & CALL H & T - SPRINGFIELD MASS - SPRINGFIELD, MASS / B & C logo - - 11.5" wooden handle nut wrench in exceptional excellent condition.

0137. Unmarked - - 12" all metal Coes type monkey wrench with a release button that lets the moveable jaw release slightly to allow for a ratcheting action. Same type mechanism was patented by Samuel H. Noble of Westfield, Mass. on Feb. 20, 1855 (patent No. 12410). Mechanism works perfectly but there is overall medium pitting. Early rare ratcheting wrench, first one I have seen. (not listed) *PAT*

0138. THE ORIGINAL - BRITISH MADE - CLYBURN - FORGED STEEL 4 / 232 - - 11" Clyburn style Crescent type wrench. Gessin has John Carter & Sons as possible manufacturer. Ex Herb Page collection. Excellent. (see RC1-33)

0139. WESTCOTT - THE KEYSTONE MFG. CO. / BUFFALO NY USA - 14 INCH NO. 84 - - 14" massive large size curved handle Crescent type, closed handle variant. Good+.

0140. THE LAMSON & SESSIONS - CO. - PAT'D - CLEVELAND, O. - - 8" Coes type monkey wrench with a stubby wooden handle. Patent referred to was issued to Matthew E. Campfield of Cleveland, Ohio on May 09, 1882. Ex. Herb Page collection. Excellent. *PAT*

0141. JACK" (incomplete "J"? looks like an "I") - PATENTE ANG ? - - 9.75" all metal quick adjust wrench with coarse rack teeth. Excellent. (not listed, no info found)

0142. Marked only 27-1/2 - - 11" twin jawed English type coach wrench. Turn the hex handle with a finial on the end to adjust. Ex Herb Page collection. Good++. (S747) .

0143. MCKINNON 12"(with a thistle? inside a diamond logo) / MADE IN CANADA - - 12" knife type wood handled monkey wrench. Made by McKinnon Industries Ltd., St. Catharines, Ont. Canada. Ex Herb Page collection. Good++. Check out Vanished Tool Makers for more info.

PiCs Lots 135 thru 143

0144. THE BILLINGS & SPENCER CO - HARTFORD, CONN. etc. - - 6.5" adjustable nut wrench. Scarce type with the angled jaws. Ex Herb Page Collection. Good++ with nickel plated finish.

0145. SARGENT & CO. USA 66 - PAT. JAN 14, 96 - - 8" Coes type monkey wrench with knife type wood handles. The Jan 14, 1896 patent was issued to Robert Cosmos Ellrich of Southington, Conn. and is usually seen on Peck, Stow & Wilcox Co.'s Solid Bar and Solid Steel monkey wrenches. scare marking variation. Good+. (C274) *PAT*

0146. J. ASBURY - XL - PATENT - - 8" adjustable nut wrench with an unique curved steel handle design with the adjustment knurl in the upper jaw. Made by Joseph Asbury of Birmingham, England circa 1869. Ex Herb Page Collection. Good++. (RG1-56)

0147. SUPER SERVICE MFG CO - KC MO - PAT PEND - - 8.5" turn handle to adjust nut wrench similar but considerably rarer than the Kansas City Boos wrenches. Good with pitting and weak markings. (S382)

0148. GIRARD WRENCH MFG. CO. - GIRARD, PA. USA (weak markings not all readable) - - 10" wood handled monkey wrench. Good.

0149. INDIAN MOTOCYCLES - HENDEE MFG CO - SPRINGFIELD, MASS. USA - WAKEFIELD WRENCH WORCESTER, MASS / NO. 17 MADE IN - WORCESTER, MASS. USA - - 7" auto type adjustable nut wrench including in Indian Motocycles tool kits. Good++.

0150. INDIAN MOTOCYCLES - HENDEE MFG CO - SPRINGFIELD, MASS. USA - WAKEFIELD WRENCH WORCESTER, MASS / NO. 8 - PAT SEPT 4, 1900 - - 6.25". Indian Motorcycle wrench. Side adjust. with hollow handle. Wakefield wrench was patented by John E. Wakefield of Worcester, Mass. Good+. (S124) *PAT*

0151. FOOTPRINT - MADE IN ENGLAND (foot print logo) - - 7" adjustable pliers type wrench with screwdriver end. Produced by the Footprint Works of Sheffield, England. Good++. (see RG1-86)

0152. Unmarked (Evans Pat'd Zip Grip) - - 6.75" quick adjust pipe wrench with helical shaft and sliding collar. Patented by Edwin Evans of Venice, Calif. (patent No. 1,728,282). Made by the Evans Wrench Co. of Fall River, Mass. and Los Angles, Calif. Excellent. (S537) *PAT*

0153. E-ZEE TOOL MFG. CORP. MADE IN U.S.A. / CERTUL (in script) TRADEMARK - PAT. PENDING - - 8" Self adjusting nut wrench. Excellent, like new. We have listed one chain wrench from this company but not a wrench like this one. (not listed, no info found)

0154. AGGI (lower jaw assembly covers rest of word) FORGIATO GARANTITO (Italian for forged guaranteed) - - 8" quick adjust nut wrench with fine rack teeth and button release. First one seen. Excellent, like new. (not listed, no info found)

PiCs Lots 144 thru 154

0155. TAFT'S PATENT / MAY 25, 1858 - - 10" wood handled adjustable nut wrench with an adjusting knurl that engages rack teeth on the edge of the wrench and a threaded shank that screws in and out of the adjustable lower jaw to give it the double screw action. Patented as a Reverse Double Screw Nut Wrench by George C. Taft of Worcester, Mass. Another one seen was also marked D. A. HAWKINS - WORCESTER, MASS Hawkins one of the early US wrench makers. He was licensed by Taft in the 1850's to make several of his patented wrenches. Rare pre-Civil War patented wrench in Good++ condition. (not listed) *PAT*

0156. Unreadable markings on handle ferrule (Davis patent) - - 9.5" wooden handle quick adjust nut wrench. A set screw on the back of the sliding lower jaw locks the jaw against the fine rack teeth on the shaft edge. Patent granted to Robert W. Davis of Elmira, NY on Oct. 16, 1883 According to Cope wrench was produced by the Armstrong Mfg. Co. of Bridgeport, Conn. and the Davis Wrench Co. of Elmira, NY. Rare wrench with an unique mechanism, only second one we have had to list. Good++ with some damaged to top handle ferrule. (not in Schultz, see C42 and C115) *PAT*

0157. Unmarked (Heath patent) - - 10" wood handled quick adjust nut wrench. Looks like patent No. 221305 issued to William A. Heath of Healdsburg, Calif. on Nov. 04, 1879. Rare wrench with an early California patentee, first one seen. Good++. (on DATAMP as "Not known to have been produced", no other listing found. *PAT*

0158. S. MERRICK - PATD - - 9.75" very early patented wood handled wrench patented as a "Screw Wrench For Grasping Cylindrical Forms". Patent No. 6002 was granted to Solyman Merrick of Springfield, Mass. and Frederick H. Bartholomew of New York City. on Jan. 02, 1849. First American adjustable pipe wrench patent. Few others seen were marked Bemis & Call. Good++. (like S835) *PAT*

0159. B.S.A. (Small Arms) - No. 3 / PATENT 25592/07 - - 9" quick adjust nut wrench with extra fine rack teeth. British patent granted on Jan. 30, 1908 to Robert Walker Smith of Birmingham England. Made in at least three sizes. B.S.A. was British manufacturer of military equipment and vehicles and BSA motorcycles. Excellent. (RC1-62) *PAT*

0160. Unmarked - - 9. 5" wild combination nut and pipe wrench with hammer head and four open end wrench openings. All metal construction with a screwed on side plate. First one seen. Exceptional high quality construction and in perfect, like new condition. Ex Herb Page Collection. (not listed, no info found)

0161. W. BOWN - PATENTED - - 6" different type adjustable nut wrench. Turning the hollow handle locks the wedge shaped sliding jaw. British patent titled "Improvements in Tricycles and Parts of Bicycles and Other Velocipedes, and in Wrenches for the Same" was granted to William Bown of Birmingham, England on Dec. 27, 1879. Marketed as THE HOLDFAST. Excellent. (RC1-65) *PAT*

0162. BICYCLE NO 7 - C. S. B. CO. - CHICAGO - - 7" Quick rack type adjust loop handle wrench. Ex Herb Page Collection. Good++. (like S540)

0163. VISE WRENCH MFG. CO. - BROOKLYN N.Y. - PATENTED APRIL 16,1889 - - 8.75" pliers type wrench with rack adjustment. by Charles Pomeroy Patent was assigned to the Vulcan Mfg. Co. of New York. Only second one we have had to list in 20 years and over 30 auctions. Plated finish with some surface roughness, weak markings.

0164. Unmarked - - 9.5" quick adjust plier type nut wrench. Looks like it is blacksmith made. Excellent.

PiCs Lots 155 thru 164

0165. MONTBEHARDAISE / NO. 0 BTE SGDG (French for "patented without government guarantee") - - 8.25" screw adjust box end wrench similar to the Roosevelt wrench. Good++. (not listed, no info found, see S464)

0166. ELLISTONE / PROTECTED - - 8" all metal unique quick adjust nut wrench. Lower jaw is slid to adjust and held in place when the top lever is depressed. First one seen and listed in DATAMP as "not known to of been produced. Excellent. *PAT*

0167. Unmarked - - 9.75" crude, blacksmith made adjustable double ended wrench with nut and pipe jaws. One of the more interesting blacksmith made wrenches I have seen.

0168. WESTON'S PATENT - ENGLAND & FRANCE - - R. TIMMIS & SONS (Birmingham, England) - - 9.75" all metal quick adjust nut wrench and hammer with an unusual mechanism with a sliding lower jaw that is locked when pressure is applied to the lower jaw when turning a nut. Q. S. Backus patent of Nov. 5, 1872 looks very similar. First one we have had to list. Ex Herb Page collection. Good++. (RC154) *PAT*

0169. Unmarked - - 10.5" all metal quick adjust nut wrench. A Lever releases the spring loaded upper jaw. First one seen. Mechanism works perfectly, overall light pitting. (not listed, no info found)

0170. THE W. W. WRENCH - 6" rack and lever quick adjust nut wrench. First one we had to list. Ex. Herb Page collection. Good+ with pitting on one side. (not listed, no info found)

0171. PATENT 12232 - - 5" all metal quick adjust nut wrench with a screwdriver end. Patented by James Clyde and George Bridges Birmingham, England circa 1884. Good++. (RC99)

0172. BROOKS' PATENT / - BROOKS' PATENT (J. B. Brooks of Birmingham, England)- - 5.5" rare adjustable nut wrench. Very unusual caliper like mechanism with two adjusting screws with knurled nuts for both adjusting and locking the handle jaws. Ex Herb Page collection. Excellent. (RC70)

0173. Unmarked (Van Duijl patent?) - - 8.75" center screw adjust nut wrench with extended lower jaw and handle finale. May be wrench patented by Jozua Cornelis Hendrikus Van Duijl of Kralingsche-Veer, Netherlands on Mar. 15, 1898. Excellent,. (not listed) *PAT*

0174. BURSTON - BRITISH PATENT 38445 - 26-1-32 / CHAS. RICHARDS & SONS LTD - DARLASTON, ENGLAND - - 8.5" all metal nut wrench with a novel eccentric cam and spring loaded lower jaw adjustment. British patent was issued to Arthur Pearson Ibbott of Oxhey, Watford, Hertfordshire, Great Britain on Dec. 08, 1932. Good+, some spots of pitting on one side. Ex Herb Page collection. (S749, RG140) *PAT*

0175. Unmarked except for two very small unreadable logos - - 7.5" English coach type heavy duty adjustable nut wrench with hexagon handle which is turned to adjust the jaws. Ex Herb Page Collection. Excellent.

PiCs Lots 165 thru 175

0176. WINCHESTER 1007 - 21" monkey wrench

0177. WINCHESTER 1006 - 18" monkey wrench

0178. WINCHESTER 1005 - 15" monkey wrench

0179. WINCHESTER 1004 - 12" monkey wrench

0180. WINCHESTER 1003 - 10" monkey wrench

0181. WINCHESTER 1002 - 8" monkey wrench

0182. WINCHESTER 1001 - 6-1/2" monkey wrench

PiCs Lots 176 thru 182

0183. STRONGHOLD PS & W CO MADE IN USA - 21-1/4" monkey wrench

0184. COES WRENCH CO WORCHESTER MASS. L. COES PATD JULY 6, 1880, JULY 8, 1884 - #45 18" monkey wrench

0185. COES WRENCH CO MFD UNDER COES PATS STEEL - 18" monkey wrench

0186. COES WRENCH CO WORCHESTER MASS MADE UNDER L. COES PATS STEEL - 17-3/4" monkey wrench

PiCs Lots 183 thru 186

0187. RUMLEY 227 T - Threshing machine wrench with D 50 and 972 on socket

0188. RUMLEY 79 T -threshing machine tooth straightener

0189. D 5D733 - Advance Rumely wrench

0190. D3J31 - Advance Rumely T wrench

0191. J.H. WILLIAMS & CO BROOKLYN -BUFFALO USA # 379 - 21" long S wrench

PiCs Lots 187 thru 191

0192. Not marked - Wood Bros threshing machine wrench

0193. 4-1/2 ALLIGATOR WRENCH ARMSTRONG

0194. CASE EAGLE - threshing machine hard to read

0195. PAT JAN 30.06 - used to pull sickle from mower, no manufacture.

0196. Not marked - IHC wheel wrench # 517481 R1

PiCs Lots 192 thru 196

0197. JOHN DEERE new DEERSKIN GLOVES-- size large with price tag

0198. JOHN DEERE COOLANT EYE - new in the package

0199. Not marked - John Deere S 2167 disc holder tool

0200. Not marked - John Deere wheel wrench S 2683

0201. JOHN DEERE TY 3755 - strap wrench new

0202. Not marked -John Deere Y 4509 B 3/8" square

0203. JOHN DEERE - pocket air pressure gauge, used

0204. SA 452 - IHC binder foot pedal with number, logo, and Mc impress

0205. SA 452 - IHC binder foot pedal with number and logo embossed.

PiCs Lots 197 thru 205

0206. 4 HOUK MFG CO BUFFALO NY 6224 - auto hub wrench

0207. 4 E&B HOLMES BUFFALO NY - double end wrench

0208. GEISER MFG CO WAYNESBORO PA 597 - large wrench

0209. 3271 - Garr Scott wrench

0210. KING DRILL MFG CO - large wrench

0211. GREENLEE - marked the same on both sides

0212. HESTER PLOW CO 1 - large wrench

PiCs Lots 206 thru 212

0213. CREAMERY PACKAGE 36485 - large wrench

0214. WOLVERINE -double open end wrench

0215. LA CROSSE PLOW CO K 128 - nice wrench

0216. LA CROSSE ND 86 -3 openings and 2 squares

0217. STERLING MFG CO D 127

0218. WILKINSON PLOW CO TORONTO NO 90

0219. 90 - Wilkinson Plow co but only marked with the #

0220. CC PLOW CO ELMIRA NY - has some pitting but hard to find

0221. HARDER x 60 - silo wrench

0222. HODGMAN MFG CO TAUNTON MASS

0223. TIGER S D - Stoddard mfg.

0224. TIGER - Stoddard mfg.

0225. LA - orphan wrench

PiCs Lots 213 thru 225

0226. 177 - Avery threshing machine tooth straightener

0227. 176 - Avery threshing machine wrench

0228. B F AVERY & SON G 176 LOUISVILLE KY USA

0229. A 252 - Avery double end socket

0230. 94 - Avery T socket wrench

0231. DP 46 - Cockshutt Plow Co disc wrench

0232. ML 15 - Cockshutt Plow Co

0233. LG 322 - Cockshutt Plow Co

PiCs Lots 226 thru 233

0234. J H CO 630 - disc wrench

0235. 47 W - Johnston Harvester wrench

0236. 2817 J H CO - adjustable

0237. JOHNSTON HARVESTER CO - 8-1/2" adjustable

0238. BAYONNE NO 1

0239. W.I.M.CO 1906 D 70

0240. 3854 - Wallis tractor T socket wrench

0241. WESTERN MFG CO - 5 openings and 2 squares wrench

PiCs Lots 234 thru 241

0242. ERIE TOOL WORKS ERIE PA USA AUTO NO 14

0243. ERIE TOOOL WORKS ERIE PA USA AUTO NO 10 - has some pitting

0244. Not marked - Baxter 6" double end adjustable

0245. KING PLOW CO ATLANTA GA K 55

0246. INDIANA SILO CO 5/8

0247. INDIANA SILO CO and on the back side 5/8

0248. 41 S 10 - Stover mfg. co

0249. INDEPENDENT SP 115

0250. IRON KING on back L 153 213

PiCs Lots 242 thru 250

0251. UTILITY WRENCH CO LD. NEW YORK - PAT'S AUG 13, 1878 - SEPT 4, 1883 - - 10" wooden handled quick adjust nut rack wrench with a spring loaded release lever and ultra fine rack teeth. Patented by Henry W. Atwater of Newton, Mass. Ex Herb Page collection. Good++. (S541) *PAT*

0252. UTILITY WRENCH CO LD. NEW YORK - PAT'S AUG 13, 1878 - SEPT 4, 1883 - - 12.25" Utility wrench like above. Good+ with light pitting. (S541)

0253. WRENCH (only readable markings) - - 8" all metal nut wrench with an unique adjusting screw on top of upper jaw. Patented by Alfonso D. Gates of Cleveland, Ohio and made by the Lorain Wrench Co. of Lorain, Ohio and advertised as the "Gates' Bolt Wrench" Good+ with light pitting. (S391) *PAT*

0254. Unmarked - - 7.5" caliper type nut wrench with a bolt and wing nut adjuster. Excellent. (not listed)

0255. LIPSEY'S PAT - JULY 31 - 1877 - - 6" all metal nut wrench with an adjusting screw on the side of the fixed jaw. Advertised as "The Lipsey" and manufactured by Roper Caloric Engine Mfg. Co. of New York City. Patented by Andrew Lipsey of West Hoboken, New Jersey. Scarce wrench. Excellent, first one I have seen with readable markings. (C203) *PAT*

0256. Lot of 2: COLLINS & CO - HARTFORD - PATENTED - OCT. 10, 1865 - wood handled monkey wrenches with distinctive hex handle ferrules and extended adjusting screw support plates. Patented by Leander E. Smith and Lucius Jordan both of Southington, Conn. (S384) *PAT*
(1.) 12" Good++.
(2.) 8". Ex Herb Page collection. Good++.

0257. Lot of 2: Coes type wood handled monkey wrenches with extended ferrules.
(1.) P. S. & W. CO. - WARRANTED / PATENTED - JUNE 16, 85 - - 10.5" Squire Robinson's patent with extended ferrule shoulder that holds the adjusting screw in place, Rare to see this feature on a Peck Stow & Wilcox wrench. Good+ with tight handle crack. *PAT*
(2.) THE LAMSON & SESSIONS CO. - PAT'D - CLEVELAND, O. / ENGINEERS - CASE HARDENED (Matthew Campfield's 5-9-1882 patent) - - 12" with extended ferrule shoulder that holds the adjusting screw (with ribbed knob) in place. Good++. *PAT*

0258. Lot of 2: ROBINSON PATENT - JUNE 16, 1885 - - Wood handled Coes type monkey wrenches with adjusting screw supporting ferrules. Patented by Squire Robinson of Southington, Conn. (S413)
(1.) 8" Good++.
(2.) 6.5" Ex Herb Page collection. Good++ with replaced handle. *PAT*

PiCs Lots 251 thru 258

0259. Lot of 4: Bemis & Call wrenches. All with Briggs type adjusting sleeves.
(1.) BEMIS & CALL H & T CO. - SPRINGFIELD, MASS USA - - 12" all metal nut wrench with the round knurled adjusting nut. Good with dings and mushrooming. (like S843-botton)
(2.) BEMIS & CALL CO. - SPRINGFIELD, MASS (weak markings, not all readable) / PAT. DEC 2, 1873 (Albert D. Briggs patent) - - 13" combination nut and pipe wrench with short hex type adjusting sleeve. Good+. *PAT*
(3.) BEMIS & CALL - SPRINGFIELD, MASS. USA / B &: C trademark logo - - 8" wooden handled combination nut and pipe wrench with long three ring adjusting sleeve and a replaceable lower pipe jaw insert. Patented Dec 2, 1873 by W. Chaplin Bemis of Springfield. Wrench is excellent, handle is fair. (S843T) *PAT*
(4.) BEMIS & CALL H & T CO. - SPRINGFIELD, MASS USA - - 15" all metal nut wrench. Round knurled adjusting nut variant. Good+ with minor dings. (like S843-botton)

0260. Lot of 5: Wrenches Made by Bemis & Call
(1.) BEMIS & CALL CO - SPRINGFIELD, MASS / A. D. BRIGGS - PATENTED - APR 28, 1859 - - 10" nut wrench with Briggs' type sleeve with five rings. Early pre Civil War patented wrench in Good+ condition with some nicks and dents. (S834) *PAT.*
(2.) BEMIS & CALL H & T CO. - SPRINGFIELD, MASS USA / (Bemis & Call logo) - - 8.5" all metal nut wrench with the round knurled adjusting nut. Good+ with grind marks on lower jaws. (like S843-botton)
(3.) BEMIS & CALL CO. - SPRINGFIELD, MASS USA / (B & C logo) - - 11" combination wood handled nut and pipe wrench with Briggs type short hex adjusting sleeve. Good++.
(4.) BEMIS & CALL H & T CO. - SPRINGFIELD, MASS USA / (B & C logo) - - 6.5" Coes type monkey wrench with knife type handle. Ex. Herb Page collection. Good++.
(5.) 8 IN B & C / NO 75 - - 8" Crescent type wrench. Ex Herb Page collection. Good++. (see S841-botton)

PiCs Lots 259 and 260

0261. Lot of 2: MANVEL & LINDSAY, NEW YORK / LINDSAY'S PATENT DEC 12, 1865 - - Wood handled monkey wrenches with a rib on back side of shaft that fits into a slot on the lower jaw. Patented by John Parker Lindsay of New Haven, Conn. Wrench was manufactured by several different companies including Coes with Marvel & Lindsay examples being the least often seen. (S402) *PAT*
(1.) 12" Marking variation with WARD WROUGH IRON on back side jaw and stamped H. M. CO - J.R.B. on the shaft. Good+ with a handle crack.
(2.) 10". Ex Herb Page collection. Excellent.

0262. MANVEL & LINDSAY, NEW YORK / LINDSAY'S PATENT DEC 12, 1865 - - 15" wood handled monkey wrench like the above two wrenches. Good++. (S402) *PAT*

0263. Lot of 2:
(1.) W & B (in a diamond logo) - MADE IN USA / MOPAC RR (Missouri Pacific Railroad) - - 15" Whitman & Barnes all metal Coes type monkey wrench. The all metal W & B monkey wrenches are scarce. Good++.
(2.) Marked only PATENT and C.K.W (former owner?) - - 15" Coes type wood handled monkey wrench, maker not known. Good++.

0264. Lot of 4: Wood Handled Monkey Wrenches
(1.) P. S. & W. Co. - SOUTHINGTON CT. - -10". Made by the Peck, Stow & Wilcox Co. Southington, CT. High quality wrench as opposed to later versions of lesser quality made in Cleveland, OH. Ex Herb Page collection. Excellent.
(2.) P. S. & W. CO. (Peck, Stow & Wilcox) - CLEVELAND O. - USA - - 8". Good+
(3.) STILLETTO (in a double headed arrow logo) - MADE IN USA / SOLID BAR - USA (all markings on the shaft) - - 8" with slab knife type handle. Probably made by Peck, Stow & Wilcox and sold by the Baker Hamilton & Pacific Hardware Company of San Francisco, Calif.(Stiletto was their trademark). Good++.
(4.) THE LAMSON & SESSIONS CO. - PAT'D - CLEVELAND, O. / ENGINEERS - CASE HARDENED (Matthew Campfield's 5-9-1882 patent) - - 8" with stubby handle and extended ferrule shoulder that secures the adjusting screw and ribbed knob. Good++. *PAT*

0265. Lot of 2: L. COES & CO WORCESTER, MASS / L. COES PAT'D JUNE 26, 1866 - MAR 23, 1869 (both are George Taft patents). Wood handled nut wrenches. First model Loring Coes produced after the breakup of L. & A. G. Coes With the holding nut inside the ferrule and the reinforcing step inside the lower jaw assembly. HP26.
(1.) 10". Ex Herb Page collection. Good++.
(2.) 12". Ex Herb Page collection. Excellent.

PiCs Lots 261 thru 265

0266. BEMIS & CALL CO. - SPRINGFIELD, MASS / NO. 2 - - 13" early adjustable pipe wrench with the short rather than long adjusting nut. Amos Call's patent of Aug.28, 1866 applies. Good. (similar to S838) *PAT*

0267. THE ERIE TOOL WORKS - ERIE, PA USA / ("E" in a circle, in a diamond logo) - - 10.5" wood handled nut wrench with Brigg's type hex sleeve and solid lower jaw assembly. Ex Herb Page collection. Rare wrench in Excellent like new condition. (similar to S388)

0268. R. W. ???? CO. - PAT - MAY 9, '82 - OCT 2, '83 - AUG. 12, '84 - STERLING O. - - 12' wood handled Coes type monkey wrench with gear shaped adjusting bolt head and a distinctive handle. Maker not known but same type wrench was also made by the Cleveland Screw Wrench Company of Cleveland, Ohio and the Sterling Wrench Co. of Sterling, Ohio. Patents were granted to Matthew E. Campfield of Cleveland, Ohio. Ex Herb Page collection. Excellent. *PAT* - - *PAT* - - *PAT*

0269. DODGE & WELLINGTON - WORCESTER, MASS. / PAT'D - NOV. 10, 1863 - Feb. 23, 1864 - - 12" Coes type monkey wrench with the twin ringed adjusting nut that is held in place by two slots in the shank. Patents were issued to George C. Taft of Worcester, Mass. Later patent was assigned to the L. Coes and was produced as their "Mechanics Wrench" Good++ with former owner's stamped ID "G. W. Thompson". (C119) *PAT* - - *PAT*

0270. S. MERRICKS PATENT / C. G. TAFT (weak markings, some not readable) - - 10" Taft's Railroad & Mowing Machine Wrench based on Solyman Merrick's patent of Aug. 17, 1835 patent. Rare to see both the Merrick and Taft markings on this wrench. Ex Herb Page collection. Good+. *PAT*

0271. PAT SEP 7 97 (Vandegrift's patent) / 30 - - 9". Vandegrift's patent screw adjust nut wrench. Scarcer wooden handle model. Ex Herb Page Collection. Good++. (S966) *PAT*

0272. JOHN J. TOWER - NEW YORK - PATENTED JULY 10, 66 - SEPT 25TH 1877 - MCH 1ST, 1881 - DEC 12TH, 1882 - - 10" combination nut and pipe wood handled wrench with Briggs type adjustment. Has a hex with a round extension adjusting sleeve. Ex Herb Page collection. Good+. (like S576) *PAT* - - *PAT* - - *PAT* - - *PAT*

0273. WINDSOR MANUF'G CO - WINDSOR, VT - PATENTED JAN 24,1860 - - 9.5" wood handle Taft type adjusting nut wrench with a spring under the lower jaw. see lot 384 for a nut and pipe version. Patented by J. E. Neil of New York, NY. A pre Civil War patented wrench. Good+ with jaw edge nicks, some mushrooming. (S427, C339) *PAT*

0274. CLEVELAND SCREW WRENCH - CLEVELAND, OH (with a triangle logo) - - 8.5" Coes type monkey wrench with extended adjusting screw support and distinctive stubby wood handle. Matthew Campfield's patent of Aug. 12, 1884 probably applies. Ex. Herb Page collection. Good++. *PAT*

0275. FULTON "AD" - - 10.75" knife type wood handled monkey wrench, The Fulton brand was used by both The United Hardware & Tool Corp. of New York and Sears & Roebuck. Rare imprint, seldom seen on a monkey wrench.. Excellent like new.

PiCs Lots 266 thru 275

0276. Unmarked- - 13" blacksmith made double open end S-wrench. Excellent.

0277. Lot of 3: 7" to 11". Neat blacksmith made alligator wrenches including two made from files. Excellent.

0278. Lot of 3: 10" to 14". Blacksmith made buggy or wagon type wrenches. Excellent.

0279. Unmarked- - 16" blacksmith made wedge type adjustable nut wrench. Excellent example of a blacksmith made adjustable wrench.

PiCs Lots 276 thru 279

0280. B & C - 8 IN. - - 8" curved handle Crescent type wrench with pipe jaw and open handle. Good+.

0281. BEMIS & CALL CO. - SPRINGFIELD, MASS. - USA / NO. 3 - - 10.5" wood handled pipe wrench with Briggs type adjustment (short hex style) and replaceable jaw inserts. Good++, jaw insert chip. (S839)

0282. Lot of 4: Bemis & Call Wrenches
(1.) B & C - SPRINGFIELD, MASS USA / BEMIS & CALL CO. - 6 IN 48A - - 6" curved handle Crescent type wrench, solid handle variant. Ex Herb Page collection. Excellent, never used? (S842)
(2.) B & C / 8 IN - - 8" curved handle Crescent type wrench, open handle variant. Good+ with former owner's stamped initials "HH". (S841-center)
(3.) BEMIS & CALL H. & T. CO. - Springfield, Mass. USA / B & C logo. - - 6.5" all metal nut wrench with a short knurled adjusting sleeve. Good++ with former owner's stamped ID "JF" and "31".
(4.) BEMIS & CALL CO. (weak makings, not all readable) / B & C logo. - - 8.5" wood handled nut wrench with Briggs type adjustment (3 ring sleeve style). Excellent with former owner's stamped ID "CJC".

0283. COLLINS & CO. - HARTFORD - - SOLID BAR - USA - - 10" Coes type monkey wrench with knife type wood handle with metal frame. Like wrenches made by the Peck, Stow & Wilcox Co. of Southington, Conn. Ex Herb Page collection. Good++.

0284. TOWER & LYON - NEW YORK - PATENTED SEPT 25TH 1877 - MAR 1ST, 1881 - DEC 12TH, 1882 - Nov. 12, 1889 - - 10.5" Briggs's type combination nut and pipe wood handled monkey wrench with a hex adjusting nut and replaceable pipe jaw insert. Patented by Bernard Donahue of New York. Good+ with some weak markings, minor dents. (S576) *PAT*

0285. THE ERIE TOOL WORKS - ERIE, PA USA / ("E" in a circle, in a diamond logo) - - 11" combination nut and pipe wrench with a wood handle and Brigg's type five ring adjusting sleeve.

0286. AGR'L ENGINE WRENCH - PATENTED - SEPT 25, 1877, MAR 1, 1881, DEC 12, 1882 - - 13" wood handled combination nut and pipe wrench with Briggs type adjusting sleeve (hex variant). Patented by Bernard Donahue of New York. Good+. (S566) *PAT*

PiCs Lots 280 thru 286

0287. WARRANTED - WROUGH - - 5." fancy early bicycle or pocket wrench with a hammer head. "Early Bicycle Wrench C. 1870 - First to be called bicycle wrenches in early catalogs" (from Ron Geesin's book). Ex Herb Page Collection. See lot 287 and 401 for similar wrenches. Excellent. (see RC1-23)

0288. Unmarked - - 5.75" fancy early bicycle or pocket wrench with a hammer head. See Lot 287 and 401 for more info. Excellent.

0289. Southgate & Fiske - Worcester, MASS. / PAT'D July 10, 1855 (Joslyn's patent) - - 6.75" rare pre Civil War wood handled nut wrench with a threaded sleeve. Patent granted to Benjamin F. Joslyn from Worcester, Mass. Ex Herb Page Collection. (S399, C185, C282, HP17) *PAT*

0290. Marked only "51" - - 5.25" center screw adjust nut wrench. Similar to the Boardman combination wrenches without the hammer, pipe wrench nail claw and screwdriver end. Another example has been found marked "J. O. Lewis - Worcester, Mass." Good with some pits, shinny clean. (not listed, no patent found)

0291. CYCLE GRIP TRADEMARK / D. H. CARPENTER PATENTED FEB 10, 1891, FEB 20, 1894 - - 5.5" Neat quick adjust bicycle wrench with screwdriver blade on end. Applicable patents were issued to Daniel H. Carpenter of Orlando, Florida. Good++. (not in Schulz, see Cope pg 90) *PAT* - - *PAT*

0292. J. H. WILLIAMS & CO - BROOKLYN, NY USA" - ALL DROP FORGED HARDENED ALL OVER FULLY WARRANTED (with a "W" in diamond logo.) / PAT'D SEPT 3, 89 - REIS'D OCT 18, 92 - - 5.5" double screw adjustable nut wrench. Patented by Henry Hammond of New Haven, Conn. Ex Herb Page Collection. Excellent. (S424) *PAT*

0293. "TRIMO A 6" - TRADE "TRIMO" MARK 6 / PATENTED 1889 - 90 - PAT'D JUNE 18, 1889 - TRIMONT MFG. CO. - ROXBURY MASS. USA - - 6" all metal Stillson type pipe wrench with a screwdriver on the end with a threaded cap and a small saw blade that tucks inside a slot in the handle shaft edge. Note: The saw blade is missing on this wrench, Advertised as a "Gas Fitters Wrench" it is much rarer than the similar Trimo Emergency Wrench". The 1889 patent was issued to John H. Vinton of Boston, Mass. and the date was marked on the jaws of most Trimo pipe wrenches for several years. A patent issued to Edward O Ely also from Boston on May 27, 1890 is also relevant. Good++ except for the missing saw blade. *PAT*

0294. INVOLUTE WRENCH -TOWER & LYONS CO - PAT'D OCT 30, 1900 - - 5.5" single ended alligator wrench with a screwdriver on the end. First wrench in Schulz's Book. Patented by Maschil D. Converse of New York, NY. Excellent+. (S1) *PAT*

0295. ATTILA - NO. 1 BTES G. D. G. (G.D.G is French for "Patented without any guarantee from the Government" - - 5" quick adjust nut wrench. Real odd ball, never seen one like it before, Excellent. (no info found)

0296. Only marked GERMANY - - 5.5" unusual quick adjust nut wrench .Pressing the back of the moveable jaw releases the fine rack teeth. Good+++. (not listed, no info found)

0297. LONG WRENCH CO. (of Akron, Ohio) / DROP FORGED - -5" sliding wedge adjust. Different markings than seen before. Patent was issued to John R. Long of Akron, Ohio on Apr. 17, 1906. Excellent. (S549B) *PAT*

0298. Unmarked - - 5" odd double ended special purpose pliers? Excellent (no info found)

0299. THE G. L. HOLT CO. - HARTFORD, CONN. / PAT. - APPLD FOR - - 4" double ended bicycle or pocket wrench with nut and pipe heads. Smaller of two known sizes. Larger 6" size is marked "The Adjustable Twin Wrench Patented Jan. 5, 1915" Patent was granted to John Anderson and John Elmer Anderson both from Portland, Conn. Good+++. (S108T) *PAT*

PiCs Lots 287 thru 300

0300. J. H. FERGUSON - DAYTON, O. - PAT NOV 15, 1910 - - 5" double ended bike or pocket wrench with nut and pipe heads. Patent No. 975,609 was granted to John H. Ferguson of Dayton, Ohio. Ex Herb Page Collection. Excellent. (S108) *PAT*

0301. 3274 A IHC CANADA - ratchet wrench with H on it

0302. IHC straight handle adjustable - 13067 D with Mc and 6 on jaw 11-3/4"

0303. D 137 - Chattanooga wrench

0304. P 1599 - IHC multi wrench with 1 one front

0305. P 1599 - IHC multi wrench with 2 on the front

0306. G 147 HALF TRACK - army wrench still in pkg. IHC # is 137464 H

0307. 350370 R1 -- IHC double end wrench

0308. IHC loop handle adjustable - # 13067 D, does have a crack or mark on the end of the loop

0309. 17977 D - IHC wrench

PiCs Lots 301 thru 309

0310. G 3866 - IHC large curved wrench

0311. IH REFLECTOR-FLARE - box and kit inside

0312. Z 788 - IHC adjustable with A on the jaw

0313. U 51 - IHC wrench with small logo harder to find

0314. UA 51 - IHC wrench with large logo and triangle on jaw

0315. 1131057 R1 - IHC oil can spout

0316. 2590570R3 - IHC crawler wrench

0317. 566375 R1 - IHC cylinder sheave gauge for combine

0318. Z 788 - IHC adjustable

0319. FOR BETTER SERVICE USE GENUINE IH PARTS - IHC 458778 R1 sickle mower guard gauge

0320. CHAMPION - IHC R 28 wrench

PiCs Lots 310 thru 320

0321. 509 - IHC hard to read, and has a bend in the wrench

0322. 45662 -No D at end of number for IHC wheel socket wrench

0323. P 397 - IHC tension tool

0324. H 911 2 - IHC wrench with small crack on one end

0325. IH MAC INDUSTRIAL 3/4" combinations wrench

0326. IH MAC INDUSTRIAL - 7/8 combination wrench

0327. (2 wrenches) 1. IHC 2715 with number embossed, 2. IHC 2715 with number impressed and C on back

0328. P 28-1/2 with IHC logo and D on back

0329. 2715 - IHC wrench with Mc and D on back

0330. (3, L 9 IHC wrenches) - 1 with C on back, other with D on back, and the other with F on back.

0331. (2 IHC P 890 wrenches) -both have 3 dots and X on backside

0332. (2 IHC P 890 wrenches) - one has D on back, and the other has E on backside

0333. (2 IHC P 890 wrenches) one has 6 on back, and the other has 8 on backside

0334. (2 IHC U 50 socket wrenches)

PiCs Lots 321 thru 334

0335. WINCHESTER 1152 - 3/4" USS and 7/8 USS double open end wrench

0336. WINCHESTER 1528 - 3/8 STD and 7/16 STD S wrench

0337. WINCHESTER 1817 - 3/8 and-1/2 small s wrench

0338. WINCHESTER 1718 - 3/8 SAE and 7/16 SAE straight wrench

0339. WINCHESTER 2496 - pliers

0340. KEEN KUTTER E C SIMMONS - Hatchet

0341. KEEN KUTTER K 580 - 11/16 and 5/8, S wrench

0342. KEEN KUTTER K 580 - 5/16 USS and 3/8 USS, S wrench

0343. KEEN KUTTER 29 -3/8 USS and 7/16 USS, straight wrench

0344. KEEN KUTTER - pliers

0345. KEEN KUTTER KT 4 - 3/8 USS and 5/16 USS, S wrench

0346. KEEN KUTTER K 25 - 1/4" USS and 5/16" USS straight wrench

PiCs Lots 335 thru 346

0347. KEEN KUTTER SOLID BAR - 12" adjustable wrench with wood handle

0348. KEEN KUTTER BLACK JACK - 12" adjustable wrench with wood handle

0349. KEEN KUTTER B J SOLID BAR - 10" adjustable wrench with wood handle

0350. KEEN KUTTER SOLID BAR USA - 8" adjustable wrench with wood handle

0351. KEEN KUTTER PAT JAN 14-96 - 6-1/2" adjustable wrench with wood handle

0352. SH CO BLACK -JACK PAT JAN 14-96 - 10" adjustable wrench with wood handle

0353. * MADE IN USA WARRANTED - 8" adjustable wrench with wood handle

0354. BILLINGS - 8-1/2" adjustable wrench with steel handle

0355. COES WRENCH CO WORCESTER MASS STEEL BAR - 6-1/2" adjustable wrench with wood handle

0356. S H CO BLACK JACK PAT JAN 14-96 - 8 1/4"" adjustable wrench with wood handle

0357. AG COESS & CO WORCESTER MASS - 8" adjustable wrench with wood handle and governor marking on the back

PiCs Lots 347 thru 357

0358. COES AUTO - 12" adjustable wrench all steel

0359. GELLMAN MANUFACTURING COMPANY ROCK ISLAND ILL POLLY - 12" adjustable

0360. LARC-O-MATIC - 10" adjustable

0361. GELLMAN MANUFACTURING CO ROCK ISLAND ILL - 10" ADJUSTABLE

0362. No 1 BULLARD WRENCH - 9-1/2" adjustable

0363. ONEHANDER 10" CHROMAVAN MADE IN GERMANY - adjustable wrench

0364. EINHANDER 8" GANZ STAHL - adjustable wrench

0365. ONEHANDER 6" CHROMAVAN GERMANY - adjustable wrench

0366. BUFFALO BARCALO - 6" S adjustable with curved handle

0367. 8" ADJUST-A -BOX MFD USA FORGED ALLOY STEEL- adjustable wrench

0368. VICTOR MFG CO DAYTON O USA VIMCO - double adjustable wrench

PiCs Lots 358 thru 368

0369. ACME W& B - 15" twist handle adjustable wrench

0370. ACME W& B - 12" twist handle adjustable wrench

0371. ACME W&B - 9-1/2" twist handle adjustable wrench

0372. ACME W&B - 8" twist handle adjustable wrench

0373. Unmarked - 6 3/8" twist handle adjustable wrench

0374. Unmarked - 5" twist handle adjustable wrench

0375. ACME W&B - 5" twist handle adjustable wrench

PiCs Lots 369 thru 375

0376. HEWET'S UNION WRENCH - PAT. JAN. 25, 1864 / FOWLE & CO - SOLE AGENTS - NEW YORK - -12.5" wood handled nut wrench with a fluted adjusting sleeve. Patented by Henry Hewet of New York , NY. (original patent No. 41995 granted on March 22, 1864 was antedated to Jan. 25, 1864). An early historically important wrench with a striking appearance. Good+, some weak markings, mushrooming. (S397, C439) *PAT*

0377. HEWET'S UNION WRENCH - PAT. JAN. 25, 64 / L. W. MILLER - MANUFACTUER -479 FIRST AVE. NY - -15.75" wood handled nut wrench with a fluted adjusting sleeve. See Lot 376 for more info. Rare large size and rare Miller imprint. Good++ with excellent markings and replaced handle. (C221)

0378. E. F. DIXIE - - 10" wood handled monkey wrench with a threaded adjusting tube. Patented by Henry W0799 Hewet of New York, NY on Jun. 27, 1840. Rare, very early wrench patent that predates Coes 1841 patent for his monkey wrench. Seldom seen with the Dixie imprint (E. F. Dixie of Worcester, Mass. produced this wrench only from 1851 to 1854). Good+ with some dings, replaced handle. (S431, S396, C118, C165) *PAT*

0379. HEWET'S - UNION WRENCH / CROTON FALLS. N. Y - - 8.25" wood handled nut wrench with a threaded hollow sleeve with a fluted grip. See Lot 397 above for more info. Good+ with some weak markings.

0380. TORSHALLA - SAGBLADSFABR Saw Blade Factory, Torshalla, Sweden) - - 10.75" wooden handled threaded shaft screw adjust wrench with both nut and buggy hub nut type jaws. Quality built Swedish wrench with brass handle ferrule and end nut. Only second one we have listed. Ex Herb Page Collection. Good+.

0381. Can't read markings but should be "G. B. PHILLIPS - PAT MAY 3, 1859" - - 9" early pre Civil War patented screw adjust pipe wrench with a sliding lower jaw insert. Patent granted to George B. Phillips of Albany, NY. Good++. (S614) *PAT*

0382. Can't read most of the markings but should read "BORNSTEIN'S IMP WRENCH - PAT. AUG. 26, 1890" - - 8" turn the wood handle to adjust nut wrench with patented double screw action for fast adjustment with a locking collar. Advertised as Bornstein's Improved Patent Vise Wrench by American Improved Wrench Co. of Boston, Mass. and patented by Henry Bornstein of Boston. Ex. Herb Page Collection. Good+. (S367) *PAT*

0383. Can't read most of the markings but should read "BORNSTEIN'S IMP WRENCH - PAT. AUG. 26, 1890" - - 10.25" turn the wood handle to adjust nut wrench with patented double screw action for fast adjustment with a locking collar. see Lot 382 above for more info. Good. (S367)

0384. WINDSOR MANUF'G CO - WINDSOR, VT - PATENTED JAN 24,1860 - - 10" wood handle center screw adjust nut and pipe wrench (top jaw is a slotted pipe type jaw). see lot 273 for a nut wrench only version. Patented by J. E. Neil of New York, NY., A pre Civil War patented wrench. Good+ with some dings, mushrooming. (S427, C339) *PAT*

PiCs Lots 376 thru 384

0385. Lot of 4: 6" Coes Type Monkey Wrenches
(1.) WHITMAN & BARNES (diamond logo) - MADE IN USA - WARRANTED / WHITMAN & BARNES - CHICAGO USA - - With knife type wooden handle. Ex Herb Page collection. Excellent.
(2.) W & B (diamond logo) - MADE IN USA / WHITMAN & BARNES - CHICAGO USA - - Good++.
(3.) W & B (diamond logo) - MADE IN USA - J . H. WILLIAMS & CO - WARRANTED - - With knife type wooden handle. Ex Herb Page collection. Excellent.
(4.) GIRARD WRENCH - MFG. CO. - GIRARD, PA. USA - - Good++.

0386. Lot of 4: 6" Coes Type Monkey Wrenches
(1.) GIRARD STANDARD (in a diamond logo) - - With knife type wooden handles. Knife handled Girard wrenches are fairly scare. Ex Herb Page collection. Excellent
(2.) THE L & S CO, CLEVELAND, O. USA (The Lamson & Sessions Co.) - - With knife type wooden handle. Ex Herb Page collection. Excellent.
(3.) THE L & S CO. - CLEVELAND, O. - USA (The Lamson & Sessions Co.) - - All metal. Ex Herb Page collection. Good+.
(4.) STERLING WRENCH CO. - STERLING, O. - - With stubby wooden handle and gear type adjusting screw knob. Patented Aug. 12, 1884 by Matthew E. Campfield of Cleveland, Ohio. Good+. *PAT*

0387. Lot of 4: 6" Coes Type Monkey Wrenches
(1.) PEXTO - MADE IN USA - - With knife type wood handles. Made by Peck, Stow & Wilcox Co. of Southington, Conn. Excellent, like new.
(2.) INTERMEDIATE - - All metal with an oval shaped handle. Others have been seen with a Whitman & Barnes imprint. Ex Herb Page Collection. Good++.
(3.) P. S. & W. CO. - SOLID BAR - PAT JAN. 14, 1936 - MADE IN USA - - With knife type handles in a one piece metal handle frame. Patented by R. C. Ellrich of Southington, Conn. Ex Herb Page Collection. Excellent. *PAT*
(4.) WHITMAN & BARNES MFG. CO. MDE IN USA / DROP FORGED STEEL - - With indented panels on both sides of the shaft. Ex Herb Page Collection. Excellent.

PiCs Lots 385 thru 387

0388. Marked only: PAT. APL'D FOR (Tripp's patent) - - 5" combination bicycle or pocket tool with a simple lever and rack quick adjust nut wrwrenchench, an alligator and bike nipple wrench, and screwdriver. Patented by Ira Tripp of Aurora, Illinois on Aug. 03, 1897. Advertised as "The Best" wrench by the Best Wrench Company of Chicago, ILL. Good++, has a small drilled hole, don't know if this as factory or an owner's enhancement. (S807, C64) *PAT*

0389. Unmarked - - 5.5" cast household combination pliers with a corkscrew, glass cutter and can opener. Excellent.

0390. OSHKOSH B'GOSH OVERALLS - UNION MADE - - 5.25". Neat advertising multi-wrench with a screwdriver. Excellent.

0391. VOSS CUT. CO. - GERMANY - side is engraved with the initials "C.B.S. - - 4.25" pocket knife and adjustable wrench combination tool knife blade, files, corkscrew, punch, screwdriver and screw adjust wrench. Excellent, like new.

0392. ARTHUR SALM (of Chicago, ILL.) / SOLINGEN (on pocket knife blade) - ORIGINALTUCK-TITE (on case hasp) - -11" (size of case when open). Tool kit with a pocket knife type tool holder with eleven attachments including a hammer, file, screwdrivers, saw, can opener, bottle opener, etc. Also a small pliers marked ARTHUR SALM INC. - GERMANY, a 3 foot folding steel ruler marked STABILA - GERMANY and a 4" Crescent type wrench marked ZEREM NO.360 5/16" X 4" / DROP FORGED STEEL. Tools are marked Germany but the company was in Chicago. Arthur Salm was a Holocaust survivor. Tools including the 4" Crescent are in Excellent condition case shows wear and a torn handle holder. Click here for Salm and his company's history.

0393. SOLINGEN - GERMANY - W. GERMANEY - - 11.75" leather? case with sixteen tools and attachments including a small pliers, tweezers and a pocket knife that also serves as the handle for the attachments which include a hammer, corkscrew, saws, screwdrivers, can opener, bottle opener. awl, saws, chisel, leather punch, etc. Case and tools are in excellent like new condition with a couple of the attachments still have the original wrappers. One of the nicest tool set I have seen.

0394. CORICAMA - INOXID / MODELLO - DEPOSITATO - - 4.5" (folded) Pocket knife combination tool with a corkscrew, leather punch, can opener, screwdriver, bottle opener, file, two open end wrenches that slide into slots on the side of the knife handle and two feeler gauges marked PER SPINTEROGENO (for distributor) and PER PUNTERIE (for tappets). As tappet and distributor feeler gauges wouldn't be the same for all engines, I wonder if this wasn't part of a specific tool kit. First one seen. Excellent.

0395. SEABOARD STEEL CO. - MADE IN FRANCE - - 5.25" combination lineman type pliers tool knife with a wire cutter, knife blade, file, screwdriver, bottle opener and a punch. Excellent, plated finish does have some minor wear spots.

PiCs Lots 388 thru 395

0396. B. Belzer - Cronenberg (Germany) - - 7" odd combination tool with two open ends and a tap. Excellent.

0397. THE TRIPLET WRENCH - PAT APPLIED FOR - - 5.5" double ended bicycle or pocket wrench with adjusting bolt and alligator heads plus two tap holders. Patented by John Anderson of Portland, Conn. and mfg. by G. L. Holt Co. of Hartford, Conn. Also made or sold by Stanley for a short time circa 1913. Good++ with strong markings. (S106) *PAT*

0398. Marked only: PAT. APLD. FOR - - 5.5" adjustable double ended bicycle/pocket wrench with nut and pipe heads with an unusual slide adjustment. Good++. Only second one we have had to list. (S108-bottom, with no info, patent not found)

0399. PAT APL'D FOR - - 5.25" double jaw adjustable nut and pipe wrench .A thumb screw locks the lower jaw. Ex Herb Page Collection. Excellent with remnants of the original nickel plating. (S913t).

0400. GOODELL PRATT COMPANY - TOOL SMITHS - GREENFIELD, MASS USA - - 6" aluminum handled nut wrench with dual threaded shafts. Rarer than the 10" usually seen.. Excellent. (S394)

0401. Unmarked - - 5.5" fancy early bicycle or pocket wrench with a hammer head. Early Bicycle Wrench C. 1870. According to Geesin this was the first type of wrench to be called a bicycle wrench in early catalogs. See lots 287 and 288 for similar wrenches. Excellent. (see RC1-23)

0402. Unmarked - - 5.25" double jawed center screw adjustable nut and pipe wrench. Unique design with a brass knurled adjusting nut. First one we have had to list. Ex Herb Page Collection. Excellent, like new. (not listed, no info found)

0403. KARU - 5-16 / D.R.P - 2D.R.G.M - - 6.5" unusual pliers type nut wrench with spring loaded lower jaw and adjusting lever. 9" example seen with additional "Sirena-Roma" markings. Ex Herb Page Collection. Excellent. (not listed, no info)

0404. All Right - - 5.5" quick adjust bicycle wrench. This is the longer version. Patent was granted to Charles T. Guild of North Attleborough, Mass. on Feb. 28, 1899 (manufactured by the C. T. Guild Machine Co. of North Attleboro, Mass. Good++. (S102B) *PAT*

0405. Unmarked - - 5" side adjust bicycle or pocket wrench. Adjusting nut hangs below the lower jaw assembly. Excellent.

0406. TRADEMARK COCHRAN "SPEEDNUT WRENCH" - REG. US PAT. OFF. / PAT'D MAY 2, 1916 - - MADE IN CHICAGO, ILL. USA - - 6" self adjusting nut wrench. Design patented MAY 2, 1916 by Walter Taylor of Chicago, IL. Ex Herb Page Collection. Scarce small size in Excellent condition, looks unused. (S320, C96) *PAT*

0407. Marked only MADE IN GERMANY - - 4.25" King Dick style center screw adjust nut wrench with handle shaft extension that supports the upper jaw. Good++.

0408. HERCULES - - 6" wood handled Stillson type pipe wrench. First one I have seen. Excellent. (not listed, no info found)

PiCs Lots 396 thru 408

0409. INTERNATIONAL HARVESTER CO / PAT SEP 7 97 - - 8.5" Vandegrift cast monkey wrench. Small letters variation. Good, pitting. (R1-256) *PAT*

0410. FORDSON (with snail logo in high relief) - - 10" Fordson plow tool kit S-handled Crescent type wrench. Made by Thomas Smith & Sons of Saltley Mill in Birmingham, England Good++. (S756, R1-180)

0411. FORDSON - THE KEYSTONE MFG CO / BUFFALO NY USA - 10 INCH NO 80 - - 10.25" curved handle Crescent type wrench, Fordson Tractor tool box wrench. Excellent.

0412. FORDSON - - 10" Fordson plow tool kit S-handled Crescent type wrench. Open handle variation. Excellent.

0413. OSBORNE (Auburn, NY) / PAT SEP 7 97 - - 8.5" all metal Vandegrift monkey wrench. Good+, with slightly sprung jaws. (R1-363) *PAT*

0414. Y-160B - 7/16 - 1/2 - - 7.25" double open ended Beryllium? non-sparking wrench. Good++.

0415. Lot of 4: Farm Type Wrenches
(1.) M E S (marked vertically in large, high relief lettering) - - 7.25 " forged single opened wrench. Excellent. (not listed, no info found)
(2.) 140 (Massey-Harris / Johnston Harvester) - - 8.5" cast three opening wrench. Good+ with light pitting.
(3.) Unmarked - - 4.25" forged single hex box wrench. Excellent.
(4.) J H CO / 218 (Johnston Harvester) - - 9.25" cast three opening wrench. Good++. (R1-272)

PiCs Lots 409 thru 415

0416. FORD (script) - "E" in a circle logo - - 6.5" King Dick style adjustable nut wrench with a square drain plug wrench extension on the handle end. Thought to be an English Ford tool kit wrench? Another one seen was marked "T. S. & S (Thomas Smith & Sons of Saltley Mill in Birmingham, England), maker's of the Snail Brand tools. Also seen without the square extension end. Excellent, like new. (see RG1-146)

0417. FORD (in script) towards the end of the handle. - - 8" Crescent type nut wrench. Probably used in one of the Ford factories. Good++.

0418. Lot of 4: Ford Related Wrenches
(1.) FORD (in script) with "M" - - 8" auto type adjustable nut wrench. Part of the Fordson Tractor Model M tool kits. Excellent.
(2.) T-1387 (with Moore's "M" in a circle logo) - FORD (script) - - 9" auto type adjustable wrench. Ex Herb Page Collection. Good++.
(3.) LECOMPETE - - 11" after market older style Ford sparkplug and cylinder wrench. Probably made by the Whitehouse LeCompte Mfg. Co. one of the rarer of several Ford after market sparkplug and cylinder wrenches. Good++.
(4.) 9N17014 FORDCO (script inside a oval) USA and ruler markings / 14 with Moore's "M" in a circle logo - - 10." Ford plow wrench. Good with some pitting.

0419. J57 / J58 (orphan) - - 7.25" all cast quick adjust nut wrench. These numbers should turn up in a parts list someday. Listed in Schultz as "Duluth Quick Adjust"? Good++ with overall light pitting or casting roughness. (S957).

0420. MACK (in script" (Mack Trucks - Allentown, Penn.) - - 14"{ over sized automobile type nut wrench. Good+ with light pitting.

0421. THE MANDT WAGON CO (Stoughton, Wisc.) - - 10" Coes type wood handle monkey wrench. Good++. (R1-307)

0422. DEERING (in a shield logo) (William Deering & Co. - Chicago - IHC No. 7694TM) - - 10" Coes type wood handled monkey wrench. Good+.

0423. WHITELY (on both sides of the brass handle) (Champion later IHC) - - 9.75" all metal Coes style monkey wrench, probably made by Girard Wrench Mfg. Co. Rare wrench, first one seen with a brass handle. Note: Same type wrench can also be found marked "Champion" (see lot 424 below). Whitely, Fassler and Kelly were involved in the early history of the Champion Mower & Reaper Co. Ex Herb Page Collection. Good++. (S423, not in Rathbone)

0424. CHAMPION (large markings on both sides of the handle) (Champion Mower & Reaper Co. - Springfield, ILL., later IHC) - - 10" all metal Coes style monkey wrench. Successor of Whitely wrench above. Ex Herb Page collection. Good+++. (not in Rathbone)

0425. <M-H> (in a rectangle logo) (Massey-Harris) - - 11" automobile type wrench. Excellent.

PiCs Lots 416 thru 425

0426. Not marked - South Bend Chilled Plow co large wrench

0427. 1820 C - Case eagle wrench

0428. 1819 C -Case Eagle wrench with one ear broke off

0429. NC - South Bend Chilled Plow wrench with L on the back

0430. 418 L - Rude Bros spreader wrench

0431. K 439 MADE IN UNITED STATES OF AMERICA - Case eagle on back

0432. 515 - Russell & co socket

0433. V & K DAYTON O -single open end wrench

0434. 96 VULCAN PLOW CO EVANSVILLE IND - 3 opening wrench

0435. 95 - Vulcan Plow co 3 opening wrench

PiCs Lots 426 thru 435

0436. WIARD.S - multi opening wrench

0437. W P CO 94 - wrench

0438. W P CO - wrench

0439. W P CO A2 - wrench has some pitting

0440. B F AVERY & SONS AA 38 - wrench

0441. B F AVERY & SONS J 97 - wrench

0442. B F AVERY & SONS CHILLED PLOW K 209 - wrench

0443. AVERY 93 - wrench

0444. R 298 - orphan wrench

PiCs Lots 436 thru 444

0445. B 127 - orphan wrench

0446. BUFFUM TOOL CO - puller

0447. A 944 - Superior combination tool

0448. 1185 - Massey Harris wrench

0449. UNCLE SAM 0171 - buggy wrench

0450. GRANIT STATE - small cut out wrench

0451. X 32 - Whitman & Barnes wrench

0452. MIDLAND MFG CO TARKIO MO USA; TAGUE & KERLI WRENCH

0453 WYETH - wrench like H 911

0454. 103 CHECK ROWER HAWORTHS - wrench

0455. HARRIMAN - wrench

PiCs Lots 446 thru 455

0456. 1 - orphan wrench

0457. 578 - orphan wrench

0458. W W CO - not specifically identified

0459. HAYES E B 315 - T socket wrench

0460. F F MFG CO - wrench does have one ear broke off

0461. M 55 - Stoddard Mfg. co wrench

0462. UNADILLA SILO CO - wrench

0463. UNIDALLA SILO CO 30 and has 4 stamped on the other end wrench

0464. STERLIN NO 295 - wrench

0465. H-46 - Stoddard wrench

0466. A 375 - Hayes Pump

PiCs Lots 456 thru 466

0467. RHINO 14" RHINO TOOL & MFG CO DENVER -adjustable wrench

0468. 14" MASTERENCH HELLER MADE IN USA - wrench

0469. 8" MASTERENCH HELLER BROTHERS CO NEWARK NJ USA - wrench

0470. 6" MASTERENCH HELLER BROTHERS CO NEWARK NJ USA - wrench

0471. 10" MASTERENCH HELLER MADE IN USA - wrench

0472. 8" MASTERENCH LYNCHMEAD MFG CO TURLOCK CAL - wrench

0473. 10" SAMPSON DENVER COLO PAT # 1466136 - wrench

0474. 8" W- GERMANY - wrench

PiCs Lots 467 thru 474

0475. B & C -10" curved handle adjustable wrench

0476. B & C -8" curved handle adjustable wrench

0477. ARINGDON NO 1 -adjustable wrench

0478. B & C -6" curved handle adjustable wrench

0479. BARCALO BUFFALO - 6" curved handle adjustable wrench

0480. 6 IN NO 80 B & C -adjustable wrench

0481. Not marked - adjustable buggy type wrench with brass wing nut

0482. BILLINGs & SPENCER HARTFORD CONN 7" PAT FEB 18t,h 1879 -adjustable wrench

0483. WAKEFIELD NO 17 WORCESTER MASS PAT NOV 14, 1922 - adjustable wrench

0484. BILLINGS & SPENCER 97 PAT SEPT 29, 1896 - adjustable wrench

0485. 5 IN AUTO - adjustable wrench no mfg.

PiCs Lots 475 thru 485

0486. A-6 PAT NOV 13-00 MAR 11-02 - Mossberg adjustable wrench

0487. STERLING NO 2 FRANK MOSSBERG CO PAT NOV 13-00 - adjustable wrench

0488. A-3 PAT NOV 13-00 Mar 11-02 - Mossberg adjustable wrench

0489. US SEPARATOR - 5 1/4"" adjustable wrench

0490. A-2 FRANK MOSSBERG CO PAT NOV 13-00 MAR 11-02 - adjustable wrench

0491. BILLINGS & SPENCER CO 96 HARTFORD CONN MADE FOR POPE MFG CO - adjustable wrench

0492. DIAMOND NO 11 FRANK MOSSBERG PAT NOV 13-00 MAR 11-02 -adjustable wrench

0493. A-1 PAT NOV 13-00 MAR 11-02 - Mossberg adjustable wrench

0494. STERLING NO 1 - Mossberg

0495. WEDGEWAY HERBRAND 3/16 USS 1/4" USS - adjustable wrench

0496. DAYTON 2813 C - buggy wrench

0497. FREEPORT 2813 B - buggy wrench

0498. PRATT 2813 C - buggy wrench, it does have a repair on the end

0499. COLUMBUS BUGGY CO COLUMBUS O 2812 - buggy wrench

0500. MONMOUTH 141 - wrench

PiCs Lots 486 thru 500

0501. Unmarked - - 8.25" simple self adjust wrench with an octagon handle. First one seen. Excellent. (no info found)

0502. MADE IN GERMANY - - 9.75" Clyburn shaped quick adjust nut wrench with a sliding wedge type adjustment. Ex Herb Page Collection. Good++. (S759).

0503. NOV 15, 1903 - C. E. GREEN - - 9.25" wood handled quick adjust nut wrench. Probably the only known example. Described by Herb Page in his inventory list as "A wood handled rack wrench with a most ingenious lever operated back wedge system to secure adjustment. Replaced rosewood handle." Patent not found, Nov. 15, 1903 is not a patent date. Excellent with the striking rose wood handle.

0504. Becher's (Becher & Co. - Eckesey, Westphalia Germany) - DRG. 105813 ("German Empire Patent") / SCHLUESSEL KOENIG (German for "Wrench King" - - 10.5" center screw adjustable nut wrench. German patent granted on Jan. 20, 1898 to Carl Becker. Ex Herb Page collection. Extra heavy wrench in Excellent condition. *PAT*

0505. Unmarked - - 10" all metal screw adjust nut wrench with skeleton type handle. A knurled brass adjusting nut rotates a threaded center shaft that adjusts the lower jaw. Pictured in Schultz's book but with no information. Excellent. (S452)

0506. Unmarked - - 15.5" blacksmith made adjustable nut wrench with a wedge to lock the lower jaw. Excellent example of an early Blacksmith made wrench.

0507. LITTLES' AUTOMATIC WRENCH CO. - CRESSON. PA (with a L. W. Co, logo) / 10 - PATENTED JUNE 11, 1912 - - 10" pivoting self adjust pipe wrench. Patented by William A. Little of Cresson, Penn. Good+ with some minor pitting. (S339) *PAT*

0508. THE BAY STATE / PAT APPLD FOR - - 6.75" double ended ratchet wrench. Patented by Peter Lord of Worcester, Mass. on Jan 15, 1901. Excellent. *PAT*

0509. ROBINSON (M. J. Robinson Co. - New York, NY) / DROP FORGED STEEL - - 10" curved handled Crescent type. Good++. (S307, C206)

0510. PAT'D AUG. 6, '78 (Hill's patent) - - 9.5" all malleable cast screw adjust nut wrench with a hammer head. Patented by Henry Hill of Moline, Illinois (patent No. 206,733) and made by the Moline Malleable Iron Co. of Moline, IL. Also found in a smaller 7" size. Good++. (S958, C166) *PAT*

0511. GORDON AUTOMATIC - PAT'D APPLIED FOR (same markings both sides) - - 10" Crescent type with a quick opening feature. Patented by William Gordon of Union, New Jersey on July 22, 1924. Scarce large size in Excellent condition.. (S493) *PAT*

PiCs Lots 501 thru 511

0512. Lot of 4: Bicycle or Pocket Wrenches
(1.) Marked only "A.G." - - 5" simple loop rod handled screw adjust nut wrench. Ex Herb Page Collection. Good+ with some scratches. (no info found)
(2.) Unmarked - - 5.5" side adjust bike wrench with a tire tool handle end. Excellent.
(3.) SPRINGFIELD - DROP FORGING CO. - SPRINGFIELD, MASS. USA - - 5.5" side screw adjust bicycle wrench with oval cutouts on each side of the lower jaw assembly. Good++.
(4.) BARCALO-BUFFALO - MADE IN USA - - 5" side screw adjust bicycle wrench. Riveted lower jaw assembly. Good++.

0513. Lot of 3: Bicycle or Pocket Type Wrenches. Made by the Wakefield Wrench Co. of Worcester, Mass.
(1.) WAKEFIELD WRENCH - WORCESTER, MASS. USA - - 4.25" side adjust bicycle type wrench with a hollow sleeve type handle. Ex Herb Page Collection. Good++.
(2.) WAKEFIELD - MADE IN USA / PATENTS PENDING - IN USA - AND FOREIGN COUNTRIES - - 5" side screw adjust bicycle wrench with enclosed adjusting knurl. Good++ with some weak markings.
(3.) WAKEFIELD CYCLE WRENCH - WORCESTER, MASS. USA / PAT. APL'D FOR - - 5.5" side adjust bicycle type wrench. Good++.

0514. TRIBUNE BICYCLES / THE BLACK MFG. CO. ERIE, PA. - - 4.5" forged wrench with three open ends and a hex box. Excellent.

0515. MOTOR-CYCLE - STILLSON PATTERN WRENCH - BONNEY VISE & TOOL WKS. INC. - ALLENTOWN, PA USA / MOTOR-CYCLE - - 6" made thinner and lighter than regular Stillson wrenches. Excellent.

0516. CHARLES E. HALL CO. - BUFFALO, NY USA - NO 4 - - 5" side adjust bike wrench. Excellent.

0517. U. S. (in a diamond logo) - - NO 103 (Peter Lowentraut Mfg. Co. of Newark, New Jersey) - - 6" side adjust bicycle type wrench with a tire tool on the end of the handle. Good++.

0518. REG'D - ARGONAUT - TRADEMARK - MASSDE IN USA - - 5.5" side adjust with tire tool end. Ex Herb Page Collection. Good Plus. (not listed, maker not known)

0519. LOWELL WRENCH CO./ PAT. AUG. 10, 1875 / WORCESTER, MASS. (some markings not readable) - - 5.25 hand vise. Adjust the jaws by turning the handle. Patent was granted to Leonard L. Pollard of Worcester, Mass. Good++ with some light pitting. *PAT*

0520. THE LAVIGNE & SCOTT M'F'G - CO - NEW HAVEN, CONN. / PAT. DEC 31-95 (picture of a feather) WEIGHT - - 5.5" side adjust bike wrench. Patented by Joseph Lavigne of New Haven, Conn. on Dec. 31 - 1895. Good++. (not in Schultz, see C200) *PAT*

0521. THE BECKLEY RALSTON - CO. - CHICAGO - - 5" side adjust bicycle wrench. Excellent.

0522. SANDOW (in decorative lettering) THE LAVIGNE & SCOTT MFG CO, - PAT FEB. 5, 95 - NEW HAVEN, CT - - 525" center screw adjust bicycle or pocket wrench with skeleton handle. Patented by Joseph P. Lavigne of New Haven, Conn. Ex Herb Page Collection. Good with weak markings as usually found. (S109B) *PAT*

0523. PAT MAY 11, 1897 - FEB 20, 1900 - - 5.25" side screw adjust bicycle wrench with a spanner. Patented by Frederick Schrader of Bridgeport, Conn. Ex. Herb Page Collection. Excellent with most of the plating remaining. (S121B) *PAT*

0524. BARNES TOOL COMPANY / DROP FORGED STEEL - - 5.25" forged side adjust nut wrench with indented handle panels. Ex Herb Page Collection. Excellent. (S98)

PiCs Lots 512 thru 524

0525. Lot of 3: Bicycle or Pocket Type Wrenches
(1.) Marked only with a "L" in a keystone logo (Lakeside Forge Co, Erie, Penn.) - - 5" side adjust with a tire tool end. Ex Herb Page collection. Good with an area with grind marks.
(2.) CHARLES E. HALL CO. - BUFFALO, NY USA - - side adjust type with openings on each side of the lower jaw assembly. Good+.
(3.) W & B CO MADE IN USA (with a diamond logo) (Whitman & Barnes) - - 5.5" side adjust type with slotted handle shaft. Good+, looks like a replaced knurl bolt.

0526. Lot of 4: Bicycle or Pocket Type Wrenches Made by the Wakefield Wrench Co. of Worcester, Mass.
(1.) WAKEFIELD WRENCH - MADE IN - WORCESTER, MASS. USA / NO. 6 - PAT. SEPT. 4, 1900 - - 4.5" side adjust bicycle type wrench with a sleeve type handle. Also found with "Indian Motocycle" and Flying Merkel" imprints. Ex. Herb Page collection. Good++. *PAT*
(2.) "MACK" (Mack Trucks - Allentown, Penn.) - WAKEFIELD NO. 5 - PAT'D MADE IN WORCESTER, MASS. - - 4.25" side screw adjusting pocket wrench with a guard around the adjusting gear. Patented Nov. 14, 1922 by Joseph F. Oliver and Joseph P. Fleming, both from Worcester, Mass. and assigned to Clarence E. Wakefield also from Worcester. Ex Herb Page collection. Excellent. *PAT*
(3.) WAKEFIELD - - 5" side adjust bicycle wrench. Good+.
(4.) WAKEFIELD CYCLE WRENCH - WORCESTER, MASS. USA / PAT. APL'D FOR - - 5.5" side adjust bicycle type wrench. Ex. Herb Page colle3ction. Excellent.

0527. Lot of 3: Bicycle or Pocket Type Wrenches
(1.) SEARS ROEBUCK & CO. - CHICAGO / U.S in a diamond logo (P. Lowentraut Mfg Newark, NJ) - - 5.5" side adjust type. First we have had to list. crack on edge of the lower jaw, faint but readable marking. (not listed)
(2.) PAT'D JUNE 7TH 1892 (with a "G" in diamond logo)- - 4.5" turn handle to adjust nut wrench without the small bicycle spoke wrench attachment variant. Made by the Gendron Iron Wheel Co. of Toledo, Ohio an early bicycle manufacturer. Patent No. 476,629 was issued to Peter Gendron of Toledo, Ohio. Good with light pitting, poor markings. *PAT*
(3.) J. C. SPEIRS & CO. - WORCESTER, MASS. - - 5.25" side adjust. Ex Herb Page collection. Good+.

0528. Lot of 3: Bicycle or Pocket Type Wrenches
(1.) J. C. SPEIRS & CO - WORCESTER, MASS. / PAT'D SEPT. 8, 1891 - - 5" center screw adjust bike wrench with cutouts on both sides of the shaft. Patented by Reinhard T. Torkelson of Hatfield, Mass. Advertised in 1892 as the "Majestic Wrench". Ex. Herb Page Collection. Excellent. (S106, C173) *PAT*
(2.) Unmarked - - 3.75" small center screw adjust. Ex Herb Page collection. Good++.
(3.) J. C. SPEIRS & CO - WORCESTER, MASS. - - H. B. & CO. - NEW YORK (Hulbert Brothers & CO. New York, NY.) / PAT'D SEPT. 8, 1891 - - 5" like No. 1 above but with the H. B. & Co. imprint. They made the "Majestic" bicycles. Good with light pitting over some of the markings.

0529. BARCALO-BUFFALO - MADE IN USA - - 4.25" center screw adjustable wrench, one side with exposed shaft. Ex Herb Page collection. Excellent.

0530. PAT'D JUNE 7TH 1892 (with a "G" in diamond logo) - - 4.5" turn handle to adjust nut wrench with a small bicycle spoke wrench attachment. Made by the Gendron Iron Wheel Co. of Toledo, Ohio an early bicycle manufacturer. Patent No. 476,629 was issued to Peter Gendron of Toledo, Ohio. Excellent. *PAT*

0531. ELASTIC TIP CO / PAT'D MARCH 26, 1895 - - 5.5" side screw adjust bicycle wrench. The Elastic Tip Co. was located in Boston. Mass. and advertised bicycle and automotive parts, games and miscellaneous hardware. Patent not found. Ex Herb Page collection. Excellent with small had to read markings as usual. (S98, C284)

0532. QUEEN - - 5.5" side adjust bicycle wrench. Good.

0533. CHARLES E. HALL CO. - BUFFALO, NY USA - NO. 11 (with a "H" in a shield logo) - - 5" side adjust bike wrench. Ex Herb Page collection. Good++.

0534. THE LAVIGNE & SCOTT M'F'G - CO - NEW HAVEN, CONN. - PAT. DEC. 31 - 95 / (picture of a feather) WEIGHT - - 5.5" side adjust bike wrench. Patented by Joseph Lavigne of New Haven, Conn. Good++. (not in Schultz, see C200) *PAT*

PiCs Lots 525 thru 534

Acme Twist Handle and Hercules Loop Handle Wrenches (Lots 535 thru 550)

The Acme and Hercules wrenches were based on F. H. Seymour's (Detroit, Michigan) patent of Feb 27, 1883 and were produced by four different companies. First by Owsley Bros, & Marbles which was reorganized as Geo. W. Marble than Capitol Mfg. Co and finally by Whitman & Barnes, all located in Chicago. Assembling a complete set of these wrenches has always been a challenging goal of many wrench collectors and is becoming increasingly difficult to find good examples, especially the larger sizes. (see S364, S365, C330) *PAT*

0535. Unmarked - - 15" twist handle nut wrench with an unusual adjusting nut that is not attached to the lower jaw assembly unlike other twist handles seen. Former owner's modificiation?. Good++ with a crack or manufacturing flaw on the edge of the lower jaw.

0536. Unmarked - - 15" twist handle with nut and pipe jaws. Advertised at various time as Holland's Acme or Hercules combination nut and pipe wrench. Good++. (S565)

0537. Most of the markings acre not readable - Marked "A" (for agricultural model) on the lower jaw side - - 9.5" Hercules type loop handle adjustable nut wrench with the "bowtie" bracket.

0538. ACME (in a diamond logo) - PAT FEB 27, 83 - - 18" twist handle nut wrench Railroad model with the thicker handle and hex adjusting nut. pre Whitman & Barnes, possibly Capitol Mfg. Co. of Chicago. Good++. (like S365)

0539. ACME (in a diamond logo) - PAT FEB 27, 83 - - 12" twist handle nut wrench. Made by one of the earlier manufactures, pre Whitman & Barnes, possibly Capitol Mfg. Co. of Chicago. Usually the Acmes are pretty well beat up, this is one of the better ones I have seen, Ex. Herb Page collection. Good+++. (S365)

0540. Unmarked - -21" Acme twist handle with the knurled adjusting nut. Hard to find largest size of the twist handles. Good++. (S365)

PiCs Lots 535 thru 540

0541. Unmarked - - 7.5" loop handle nut wrench. Good with mushrooming.

0542. Partial diamond logo, rest of the markings are not readable except for the letter "A" on the lower jaw assembly. - - 6" loop handle nut wrench with the bowtie bracket. Ex Herb Page collection. Good++.

0543. W & B CO. - HERCULES (in a diamond logo) - PAT FEB 27, 83 - MADE IN USA - - 5.5" loop handle nut wrench. Excellent.

0544. W & B CO. - HERCULES (in a diamond logo) - PAT FEB 27, 83 - MADE IN USA - - 9.25" loop handle nut wrench. Ex Herb Page collection. Good with overall light pitting.

0545. W & B - ACME (in a diamond logo) - PAT FEB 27, 83 - MADE IN USA - - 6" twist handle nut wrench. Rare variant with adjusting nut on the top bar. Ex Herb Page Collection. Excellent.

0546. ACME (in a diamond logo) - PAT FEB 27, 83 - - 12" twist handle with nut and pipe jaws. Like Lot 539 above but heaver Railroad Model with hex adjusting nut. Good++.

0547. acme (in a diamond logo) - pat feb 27, 83 - made in usa - - 7.75" twist handle nut wrench. acme (in a diamond logo) - pat feb 27, 83 - - 18" twist handle nut wrench. ex herb page collection. good++.

0548. W & B - ACME (In a diamond logo) - PAT FEB 27, 83 - USA - - 5" twist handle nut wrench. Ex Herb Page Collection. Good+.

0549. Unmarked - - 8" odd twist handle wrench with one regular jaw and one offset hook jaw. Made in Germany? Good+ with some dings.

0550. Lot of 2: Acme Twist Handle Variants
(1.) W & B CO. - ACME (in a diamond logo) - PAT FEB 27, 83 - MADE IN USA - - 8" twist handle nut wrench. Scarce variant with the adjusting nut on the top bar rather than bottom. Ex Herb Page collection. Good++ with exceptional strong markings.
(2.) W & B CO. - ACME (in a diamond logo) - PAT FEB 27, 83 - MADE IN USA - - 9.5" twist handle nut wrench like above but with the adjusting nut on the bottom rod. Good with dings, mushrooming and weak markings.

PiCs Lots 541 thru 550

0551. 7B8975 - Caterpillar wrench

0552. 3556-A - Caterpillar wrench

0553. S 702 FOR WATER PUMP NUTS ONLY - Caterpillar wrench

0554. 6F3703 - Caterpillar drain plug wrench

0555. Not marked - Caterpillar L 1767 wrench

0556. 96 P - Advance Rumely wrench

0557. 171 J - Advance Rumely wrench

0558. 185 J - Advance Rumely wrench with one end broke off

0559. 117 A - Advance Rumely wrench

PiCs Lots 551 thru 559

0560. WOOD - 11 1/4"" long wrench

0561. WOOD - no hole variation with some pitting

0562. WOOD - 2 hole variation wrench

0563. K 456 - Walter A Wood wrench

0564. R 300 - Walter A Wood wrench

0565. 2152 - Walter A Wood mower pitman wrench

0566. 1728 - Walter A Wood wrench

0567. 2 -114 - orphan wrench

0568. H 623 - orphan wrench

0569. B 55 - orphan wrench

PiCs Lots 560 thru 569

0570. (pair of wrenches) -R 121 and T 50 orphan wrenches

0571. (pair of wrenches) - VA 94 and 139 orphan wrenches

0572. (pair of wrenches) - GA KELLY 1 pitted and WOOD BROS SILO

0573. KEEN KUTTER NO 950 - pliers

0574. KEEN KUTTER - 7 1/4"" chisel

0575. KEEN KUTTER - saw set pliers.

0576. KEEN KUTTER - saw set pliers.

0577. KEEN KUTTER - hack saw

0578. KEEN KUTTER - 3/16 drill bit.

0579. KEEN KUTTER - 7-1/2" punch

PiCs Lots 570 thru 579

0580. B - Melott cream separator bowl wrench

0581. C - Melott cream separator bowl wrench

0582. G - Melott cream separator bowl wrench

0583. MAYTAG - Threshing machine wrench with handle replaced.

0584. BEMIS & CALL H&T C SPRINGFIELD MASS USA - 16" adjustable wrench

0585. BEMIS & CALL H&T C SPRINGFIELD MASS - 15" steel adjustable wrench

0586. BEMIS & CALL SPRINGFIELD MASS - 15" adjustable wrench

PiCs Lots 580 thru 586

0587. J 1507 - IHC straight handle ratchet

0588. 6850 H WATER PUMP - IHC wrench with D on the back

0589. 9802 DA - IHC crank with # 2 on it

0590. 9802 DA - IHC crank with # 3 on it

0591. ARTURUS MFG CORP 41-1012-5 - Military wrench for IHC with number A 323332

0592. (five IHC wrenches) - 21264 D, 21264 D, G 3525, 271 N, and 5378 TM badly pitted

0593. (two sockets) - 3256 X 24, and 2152434 both not identified yet.

0594. 778 E 1 - not identified socket.

PiCs Lots 587 thru 594

0595. (2 wrenches) - not marked IHC 23966 D wheel wrench and U 348 Allis Chalmers wrench pitted.

0596. LX1103 - Allis Chalmers 3/4" square nut and 5/8" hex nut

0597. (2 wrenches) - 074762 Allis Chalmers not marked, and 040284 Allis Chalmers not marked.

0598. 183 - Oliver, IHC wrench

0599. THE OHIO CULTIVATOR CO DA 32 - wrench

0600. W 402 - Emerson disc wrench

PiCs Lots 595 thru 600

0601. FORDSON THE KEYSTONE MFG CO NO 80 - 10" adjustable wrench

0602. FORDSON - 10" adjustable wrench with name on the head only

0603. Fordson - (2) wrenches marked Fordson.

0604. Ford USA - 8 1/4"" auto wrench

PiCs Lots 601 thru 604

0605. 3 FORDSON wrenches - 2371, 2097, and 2372

0606. 2 FORDSON WRENCHES -F 2197

0607. C 28 - David Bradley wrench

0608. B 22 - David Bradley wrench

0609. 138 - David Bradley wrench

0610. U 12 BRADLEY CULTIVATOR - David Bradley wrench

0611. P 315 - Massey Harris wrench

0612. M-H MADE IN CANADA MP1 - 10-3/4adjustable wrench.

PiCs Lots 605 thru 612

0613. 25 H 2 ALFA LAVAL TRI CLOVER - large aluminum wrench

0614. UNIVERSAL - small cutout wrench

0615. D H - Frost and Woods wrench

0616. D 189 - Moline Plow Co check row pliers

0617. S B CHILLED P C - South Bend Chilled Plow Co. wrench

0618. GALE 0 11 A - Gale wrench

0619. SB - South Bend Plow wrench

0620. 41-W-867-808 COMB WRENCH 50 - Military rifle wrench

0621. 3050 A FOR PITMAN - Moline Plow Co wrench

0622. 90 - Tudhope - Anderson wrench

0623. STAR DRILL 100 - very nice wrench

0624. S 12 3/4" ECTMC - E.C. Tecktunius Mfg. co wrench

PiCs Lots 613 thru 624

0625. COMPLIMENTS OF - APCO - MOSSBERG - ATTLEBORO, MASS - USA - - 4.5" scarce promotional combination alligator wrench and bottle opener. Good++.

0626. WHITAKER - CHICAGO (with a "W" in a double diamond logo) - - 4" combination alligator wrench, screwdriver and three square nut cutouts. Probably made by Vaughn & Bushnell Mfg. Co for Whitaker. Excellent except for several dots punched over the logo. (see S5)

0627. CARR MFG. CO. - KANSAS CITY, MO (on both sides) - - 4" combination alligator wrench, screwdriver and three square nut cutouts. Probably made by Vaughn & Bushnell Mfg. Co for Carr. Ex. Herb Page Collection. Excellent. (see S5)

0628. GEM T & L (Tower & Lyons - New York, NY) - - 3.25" all metal center screw adjust pocket wrench. Smallest of the Gem wrenches. Excellent with plated finish. (S102)

0629. COVENTRY MOVEMENT CO. (Coventry, England) PAT. NO. 263,633 - - 3" turn the end of the handle know to adjust miniature nut wrench. Patented by Edwin Bolton. Smallest adjustable wrench in this auction. Excellent. (RG1-79)

class="disc"> 0630. BECKLEY-RALSTON CO. (of Chicago, ILL - - 2.75" center screw adjust mini nut wrench. Ex Herb Page Collection. (see S458)

0631. JAMESTOWN, NY . MADE IN USA - - Early 4" Crescent type wrench. Jamestown was the location of the Crescent Tool Co. Excellent.

PiCs Lots 625 thru 631

0632. 485 (with two Mossberg logos) - - 5.5" double alligator wrench with five other wrench size openings and a screwdriver end. Good++.

0633. Unmarked - - 4" center screw adjust nut wrench with skeleton handle and iron rather than brass adjusting nut as usually found. Advertised in 1897 by Peck, Stow & Wilcox as the "Star Bicycle Wrench". Ex Herb Page Collection. Excellent, like new. (S104)

0634. KEATING (in script) (Keating Wheel Co. of Middletown, Conn.) / SPRINGFIELD - DROP FORGING CO. - SPRINGFIELD, MASS. - - 5.5" side screw adjust bicycle or pocket type wrench. The Keating Wheel Co. was established in 1890. Good++.

0635. C - MOSSBERG WRENCH CO. - ATTLEBORO, MASS. USA - Pat Nov 19 & Dec 31, 95" - - 5" center screw adjust Patents were granted to Frank Mossberg. Good++ with plated finish. (S103B) *PAT* - - *PAT*

0636. Lot of 2: Mossberg Side Adjust Bicycle or Pocket Type Wrenches
(1.) NO. 10 - DIAMOND (in a diamond logo) - FRANK MOSSBERG CO - ATTLEBORO, MASS USA - PAT'D. NOV 13, '00 - PAT'D MAR 11, 'O2 - - 5". Ex Herb Page Collection. Good+++.
(2.) B-1 (with two Mossberg logos) - - 5". Ex Herb Page Collection. Good++.

0637. PAT. PEND'G - Barcalo-Buffalo -MADE IN USA - 4.25" center screw adjust with hollow handle bicycle or pocket type wrench. Ex Herb Page Collection. Excellent.

PiCs Lots 632 thru 637

0638. MILLEA'S - EMERGENCY TOOL - MFG BY - UNIVERSAL TOOL CO - SPRINGFIELD, MASS - PAT. FEB 10,1903 - - 6.75" Combination wrench with nut, pipe and buggy wrench type jaws and a screwdriver. Patent was granted to Thomas D. Millea of Springfield, Mass.(patent No. 720,168). Good++. (S819, C309) *PAT*

0639. HOYT BROS - PATENT - - - 7.5" all metal early nut wrench with a bolt and wing nut adjustment. Patent was granted to Lewis and Elais Hoyt of Croton Falls, NY on May 29, 1866. Usually found with a hammer head on the end instead of the triangular opening on this example (see S798). Also first one seen with the "Hoyt Bros" markings. . Good++ (S798) *PAT*

0640. BREVETE S.G.D.G. (French for patent without government guarantees) / CANCAPO?? (weak incomplete markings) - - 6.5" all meal, turn handle to adjust nut wrench with twin jaws. Excellent.

0641. CORTLAND (Cortland Forging Co. - Cortland, NY later Westcott Wrench Co.) / 8 IN. - - 8" curved handle Crescent type wrench with open handle. In 1892 Cortland was reorganized as the Westcott Wrench Co. First one we have had to list. Good++. (C109)

0642. UTILITY WRENCH CO LD. NEW YORK - USA - - PAT'S AUG 13, 1878 - SEPT 4, 1883 - - 7.5" wooden handled quick adjust nut rack wrench with a spring loaded release lever and ultra fine rack teeth. Patented by Henry W. Atwater of Newton, Mass. Good++ with a handle crack. (S541) *PAT*

0643. V & B WRENCH - PAT'D DEC. 6, 98 - VAUGHAN & BUSHNELL MFG. CO - - 15.25" self adjusting pipe and nut wrench. Patented. by Alexander Vaughan of Chicago. Good++, marking are better than usually seen. *PAT*

0644. SHEFFY MFG CO. - PAT. JAN 21, 1896 - CHICAGO / CHICAGO - 0 - - 7.5" self adjust nut and pipe wrench with pivoting upper and lower jaws. Patented by Jay Sheffy of Chicago. Scarcer small size. Good+ with some weak marking, former owner's stamped ID "WHM". (S338) *PAT*

0645. SHEFFY MFG CO. - PAT. JAN 21, 1896 - CHICAGO / CHICAGO - 1 - - 9.5" self adjust nut and pipe wrench with pivoting upper and lower jaws. Larger example like No. 645 above. Good+.

0646. Unmarked - - 9" unusual all metal combination quick and screw adjusted wrench with straight, notched jaws. Only other one we have had to list had a open handle like S644, this one is solid. Good++. (similar to S644, no info or patent found)

0647. Unmarked - - 8.75" all metal turn handle to adjust nut wrench. Found without a handle and Herb Page made an all brass replacement. First one I've seen. Excellent restored condition. (not listed, no info found)

0648. BEMIS & CALL H & T CO. - SPRINGFIELD, MASS / BEMIS PIPE - - 10.5" wood handled Bemis type pipe wrench with the rounded top jaw, replaceable lower jaw insert and short knurled adjusting sleeve. Unusual "Bemis Pipe" markings. Excellent.

PiCs Lots 638 thru 648

0649. LAWRENCE-CLARK / PAT. 1920 - - 10.5" Adjustable wrench with a wing nut and a screwdriver tip on the end similar to the Universal Wrench but several times rarer. Excellent. (not listed, no info found)

0650. A. P. JOY - , NH / PAT FEB 1, 98 - NO. 1 - - 10" adjustable wagon wrench with a wooden spinner knob. Patent was issued to Adin Phillips Joy of New Market, NH. Excellent. (S221) *PAT*

0651. INTERNATIONAL MFG CO - PATENT PENDING / 1408 WABASH AVE CHICAGO - 2 - - 14" heavy cast screw adjust wagon wrench with a lever lightener and a wooden spinner. Patented by Ernil Klemm of Chicago on Dec, 12. 1905 (Pat. No. 806815). Good+++. (S222) *PAT*

0652. OLIVER NO 1 - PAT APLD FOR - OLIVER MFG CO - CHICAGO USA - - 10" wagon wrench with a wooden spinner (adjusted with a wheel instead of a lever version). Patent No. 865519 was issued to William H. Oliver of Chicago, ILL on Sept. 10, 1907. Excellent. (S205, C236) *PAT*

0653. OLIVER NO 3 - PAT APLD FOR - OLIVER MFG CO - CHICAGO USA (with a star logo) - - 20" wagon wrench with a wooden spinner (adjusted with a wheel instead of a lever version). Patent No. 865519 was issued to William H. Oliver of Chicago, ILL on Sept. 10, 1907. Large rare size. Excellent with a replaced handle bolt?. (S205, C236) *PAT*

0654. PAT'D NOV, 80 - OCT, 83 (in a diamond logo) (Diamond Wrench Co. of Portland, Maine) - - 6" wooden handled double jawed wrench (one side with regular nut wrench jaws and the other for buggy or wagon nuts). The Diamond wrenches were patented H. A. Thompson of Farmington, Maine. Made by the Portland Wrench Co. of Portland, ME or the Diamond Wrench Co. of Portland. Good, some unreadable markings, small handle crack, . (S208) *PAT* - - *PAT*

0655. DIAMOND WRENCH CO STEEL FORGED PORTLAND, ME / PATD NOV 2, '80 - OCT 16, '83 (in a diamond logo) - - 10.5" wooden handled double jawed wrench larger version (with different markings) of Lot 654 above. Good, minor dings, weak markings, former owner's ID stamped "C S". (S208)

PiCs Lots 649 thru 655

0656. PAT MAY 10, 04 - - 10" wood handled buggy wrench with an odd lever and U-shaped spring nut holder. Patented on Nov. 29, 1904 by William S. Mitts of Saginaw, Mich. not on May 10, 1904 as marked on the wrench. Rare and different buggy wrench, only other one we have listed was not marked. Excellent. (not listed) *PAT*

0657. Marked only PAT 9 7 08? - - 9" heavy duty all metal, twin headed female square drive ratchet with four sockets. Patented by Victor Carlson of Peoria, ILL. on Sep. 1, 1908 not Sep 7 as marked on the ratchet. Good+. (S180, C90) *PAT*

0658. D. MCFARLAND - WORCESTER - MASS. - PAT DEC 22, 74 - - 10.5" wooden handled rack and worm screw adjust with locking set screw. Patent was issued to David McFarland of Worcester, Mass. Most examples seen were not marked, this one has clear distinct markings. Excellent. (S206) *PAT*

0659. PAT APR 14-96 - NO. 3 - - 14" plier like buggy wrench with strong springs that hold the jaw halves tight on the nuts and a wooden spinner knob. Advertised as the Perfection Wagon Wrench. Rare large size. Patented by George E. Wood of Southington, Conn. Excellent. (S224, C340, R1-377) *PAT*

0660. G. L. JAMES TROY NY - - 13.5" all metal, adjustable buggy and wagon wrench with spinner handle. Adjusted with a wing nut at the top end of the wrench. Good++ with overall very light pitting or casting roughness. (S239, C179)

0661. Unmarked - - 14" all metal screw adjust wagon wrench with double jaws. Patent granted Dec. 22, 1868 to Henry E. Anthony of Providence, RI. Rare wagon wrench, first we have listed. Good+ with overall medium pitting. (not listed) *PAT*

0662. PAT'D MAY 22, 1877 (Mitchell's Patent) - - 12" turn handle to adjust buggy wrench. Patented granted by Joseph P. Mitchell of Bedford, Mass. and produced by Bowker and Tripp of New Bedford. Excellent for a handle crack. (S211) *PAT*

0663. AMERICAN WRENCH CO. - PAT. - SEPT. 8, 1885 - Augusta, Maine - STEEL - - 8" turn the handle to adjust carriage wrench with a fluted wooden handle. Single jaw variant. Patented by Bradford Lancaster of Augusta, Maine. Good++, some weak markings, minor mushrooming. (S231, C40, C50) *PAT*

PiCs Lots 656 thru 663

0664. Unmarked (Miller Falls Co of Miller Falls, Mass.) - - 8" adjustable buggy wrench with a metal spinner handle. Flat head variation. Good with replaced lower jaw bolt nut, no finish. (S207, C221)

0665. C. J. CAPEWELL, CHESHIRE, CONN / PATENT APPLIED FOR - - 8" neat buggy wrench with a bolt and wing nut adjustment. Others found are also marked in high relief letters "JOCKEY / CAST STEEL" on the sides of the jaw assemblies, these jaw sides are flat and not marked. Patent not found. Good++. (S227)

0666. G. A. HOSMER & CO - BUFFALO NY - - 7.5" cast combination plier type buggy wrench with four open end wrenches with the without the "Pat. Apl'd For" markings variation. Canadian patent was issued to Giles Arnel Hosmer of Buffalo, NY on Nov. 06, 1894. Good++. (S198) *PAT*

0667. GOODELL CO - ANTRIM NH / PAT NOV 19 1889 (Burleigh's patent) - - 8.5" wooden handled quick adjust buggy wrench with a spring loaded lever and wooden spinner knob. Pat. by Harry Burleigh of Franklin, NH. Excellent, blurry patent date markings. (S233, C144) *PAT*

0668. STUDEBAKER (Studebaker Bros. - South Bend, Indiana) / 7/8 (with a "L" in a circle logo) - - 7.75" buggy wrench. Good++. (R1-444)

0669. HARPER / PAT AP'D FOR (Harper Buggy Co. - Columbia City, Indiana) - - 8" buggy wrench with a spring type nut holder (7/8" size). Good++. (R1-218)

0670. IDEAL / PAT APR 28 1903 - - 8.5" (1" square nut size) buggy wrench with nut holder. The Ideal Buggy Wrenches were patented by Nathaniel Stone of Outlook, Washington . Excellent. (R1-246) *PAT*

0671. Unmarked - - 8.5" regular style cast buggy wrench with an unusual and unique nut holder. A ring around the shaft and bolt holder extension is slid to tighten the nut holder and hold the nut in place. First one I have seen. (not listed, no info found)

0672. Marked only "H-A" 7" very unusual cast adjustable buggy wrench. Has a spring loaded lower jaw that is pulled back to fit on the nut and a bolt and knurled nut that is adjusted to fix the maximum opening of the jaws. Never seen another one! Excellent. (not listed, no info found)

0673. Unknown - - 7.5" cast buggy wrench with a wooden handle. Like a few others of this type the socket fits on the axle nut and the jaws extend against the inside of the hub, the wrench is then held while the wheel is turned to loosen or tighten the nut. Unique and rare, first one have seen. I looked at 88 patents on DATAMP for axle nut wrenches that lock nut to wheel hub and couldn't find a patent that matched this wrench. Excellent. (not listed, no info found)

0674. PAT. SEPT. 21, 86 "2" (Getman's patent)- - 7.5" buggy wrench with a spring loaded nut holder with lever. Advertised as "The Universal Carriage Wrench" by the Phillips-Getman Co of Ilion, NY. Patented by Henry Getman of Ilion Sept. 21, 1886. Good++. (S228, R1-201) *PAT*

0675. HANDY / PATENT PENDING (Hart's patent) - - 8.25" malleable screw adjust buggy or carriage wrench patented by Richard P. Hart of Branford, Conn. on Aug. 04, 1903 (patent No. 204,089). Described as an improvement on (and looks very similar to) Patent No. 204,089 of May 21, 1878 issued to George Remington of Exeter, Rhode Island I don't think I have seen this wrench before. Excellent. (not listed) *PAT*

PiCs Lots 664 thru 675

0676. COOK PAT SEPT 83 - buggy wrench

0677. CANANOQUE CARRIACE CO - buggy wrench

0678. IDEAL ANCHOR BUGGY - buggy wrench

0679. 117 A - Advance Rumely wrench

0680. D 242 - Kingman Plow Co wrench

0681. A 881 ACME - wrench

0682. 261 MORRISON - wrench

0683. (2) sockets - 1. 07343, and 2. GMC 2245805

0684. Not marked -Messinger wrench

0685. (2) wrenches - 1. K 190 Bateman MFG, 2. CF&CO QUALITY

PiCs Lots 676 thru 685

0686. (2) wrenches - 1. T Tower and JD Sons, 2. WP CO 71

0687. (2) wrenches 1. EC TECKTUNIUS MFG CO RACINE WIS NO2, 2. CHAMPION SILO WESTERN SILO CO DES MOINES IOWA

0688. (2) WRENCHES - 1. 95 VULCAN PLOW CO EVANSVILLE IND, 2. 1252 Moline Plow Co

0689. (2) wrenches - 1. Z 27 orphan socket, 2. Not marked Melotte cream separator bowl wrench

0690. (2) wrenches - 1. AJ 82 socket, 2. 31 T socket wrench

0691. (3) wrenches - 1. ZA 810 IHC wrench hard to read, 2. A 804 Acme wrench pitted, 3. 122A Johnston Harvester wrench

0692. (3) wrenches - 1. 70 TO 83 orphan wrench, 2. Not marked Lynchburg Plow wrench, 3. UTILITY AJ HARWI pitted wrench

PiCs Lots 686 thru 692

0693. Clevis - 3 SB with CY 940 on clevis

0694. Clevis - W 1003 10 hole clevis

0695. (2) clevises - 1. 160, 2. W 79

0696. (2) clevises - 1. 879A1, 2. Not marked, both possible John Deere

0697. (2) clevises - 1. C 25 with broken section for pin, 2. C 25 this one has letter S after number

0698. (2) clevises - 1. WP 153, 2. W 120

PiCs Lots 693 thru 698

0699. (2) clevises - 1. 395 PAT APPD FOR, 2. 8878

0700. (2) CLEVISES - 1. 16-1/2, 2. G 4 both have wrench pins in clevises

0701. (2) CLEVISES - 1. 46. 2. 43

0702. (2) clevises - 1. 2960 -2965, 2. 226

0703. (2) clevises - 1. 818, 2. WP CO B

0704. (2) clevises - 1. SF 14, 2. 164 N

PiCs Lots 699 thru 704

0705. (3) clevises - 1. 2837 on clevis and 18 on pin, 2. 110, 3. 21 M clevis pin

0706. (2) clevises - 1. WP CO 122, 2. 8A

PiCs Lots 705 thru 706

0707. (2) Ford wrenches - 1. 17017 B with # 77 on back, 2. 17017 B with # 65 on back

0708. (4) Ford wrenches - 1. Ford USA, 2. Ford, 3. T 5693-1, 4. Pliers not marked

0709. (2) Ford wrenches - 1. FORD USA 9N17014 with # 11 on the back, 2. FOMOCO USA 9N17014 with # 28 on back

0710. Not marked - Ford tractor crank 1953-54

PiCs Lots 707 thru 710

0711. Unmarked - - 7.5" L-shaped hex socket handle with seven sockets. Excellent.

0712. Lot of 5: Oliver Wrenches
(1.) 183 (Oliver) - - 12.5". With hammer variant. Pitted, can't read markings. (R2-224)
(2.) Unmarked RP5413 (Oliver / IHC Canada) - - 7.75" stamped steel (R1-361)
(3.) Unmarked RP5414 (Oliver / IHC Canada) - - 9" stamped steel (R1-361)
(4.) Unmarked RP5415 (Oliver / IHC Canada) - - 10.5" stamped steel (R1-361)
(5.) Unmarked RP5416 (Oliver / IHC Canada) - - 12.5" stamped steel (R1-361)

0713. Lot of 5: Farm Type Wrenches
(1.) OWATONNA DOUBLE DISC (Owatonna, Minn.) / "J" in a diamond logo - - 7.25". Excellent. (R1-365)
(2.) Unmarked - - 5.5" cast beer tap wrench type. Excellent.
(3.) 5524T - Case Eagle logo (Case T. M. Co.) - - 5.5" by 11". Tee socket wrench. Excellent.
(4.) 10465CX - IHC logo - - 8.75" cream separator wrench. One spanner peg missing, end chipped.
(5.) Unmarked (with an unreadable logo) - - 7.5". Light pitting.

0714. Lot of 4: Farm Type Wrenches
(1.) R172 (IHC) - - Markings raised, no IHC logo variation. Excellent.
(2.) Deere Mansur CO / A522 - - 7.5". Painted. (DC173)
(3.) M58 (Coldwell Lawn Mower - Duluth, Minn.) - - 5.5". Excellent.
(4.) IHC logo - G3525 - -6.75" doe. Pitted.

PiCs Lots 711 thru 714

0715. Lot of 4: Three wagon pin wrenches (the longest one looks blacksmith made and one has a slot inside the jaw opening like Deere's) and a blacksmith made brace socket wrench. 8.5" to 14.5".

0716. Unmarked - - 10" lever and screw adjust wagon wrench like the Joy Wagon wrenches patented by Phillips Joy on Feb 1, 1898. Metal parts are Excellent but the wooden handle is poor. (see S221) *PAT*

0717. PAT. APR. 15, 1879 (Robbins' patent) - - 5.5" x 7.5" tee handled adjustable buggy or carriage wrench. Patent granted to Edwin Robbins of Fairfield, Maine. Only second one we have had to list. Excellent. *PAT*

0718. PAT APR 14, 1896 NO. 1 - - 10" plier like buggy wrench with strong springs that hold the jaw halves tight on the nuts and a wooden spinner knob. Advertised as the Perfection Wagon Wrench. Patented by George E. Wood of Southington, Conn. Excellent. (S224, C340, R1-377) *PAT*

PiCs Lots 715 thru 718

0719. Unmarked - - 8.5" Shank-Laster for shoe makers with an adjustable pivot base. Excellent.

0720. PTD JULY 18/72 - - 9.5" Shank-Laster for shoe makers with an adjustable lever for different leather widths. Patent No. 57454 was granted to Daniel Witt of Hubbardston, Mass. on July 18, 1872. Excellent. *PAT*

0721. PAT. NOV. 2 1879 - - 1276 - - 10.75" Patent No. 169503 for an "Improvement in Crimper's Pinchers" was issued to George G. Wright of Spencer, Mass. on Nov. 2, 1879. Good++ but it looks like a wooden handle is missing. *PAT*

0722. Marked only PATENTED - - 11.5" combination monkey wrench, crank buggy type wrench and bit brace. Patent No. 198,685 issued to Sylvanus Edward Robinson of Newark, NJ on Dec. 25, 1877. Similar tool was produced by the Lowentraut Manufacturing Co. of Newark, NJ. Good++. (see S50, C207) *PAT*

0723. LOWENTRAUT - NEWARK, NJ / PAT'D JAN, 26, 1875 - - 10" combination monkey wrench, crank buggy type wrench and bit brace. Patent No. 159,119 was issued to Sylvanus Edward Robinson of Marshfield, Wisc. Good++. (see S50) *PAT*

0724. Unmarked (Mossberg?) - - 12.5" ratchet type wrench brace. Fair, pitting, ratchet mechanism is stuck.

PiCs Lots 719 thru 724

0725. Highland (in CUTOUT letters) / Pat '82 - - 7.5" odd cast pot lifter type tool with a wooden handle. Patent No. 252,025 issued to Charles F. Fellows of Chelmsford, Mass. on Jan 10, 1882 is described as " Devices for gripping or lifting hot cooking utensils, e.g. pincers, separate pot handles, fabric or like pads". Sold one other on the 2006 Freedman Auction. Excellent. *PAT*

0726. Lot of 3: Misc. Small Tools
(1.) Marked only HONG KONG - - 2.5" miniature Crescent type wrench. Excellent.
(2.) Unmarked (Indian Motocycle) - - 5.25" flat steel wrench like ones seen marked "Indian Motocycle". I think this is a part of a set of aftermarket Indian took kit wrenches made by Mossberg with only one wrench so marked? Excellent.
(3.) RONSON - - PATENTED - IN THE - USA &: ABROAD - - 6" flat steel alligator wrench with an open end, a bottle opener and a screwdriver. Excellent.

0727. WM. HJORTH JAMESTOWN N.Y. - PAT SEP. 8, 1903 - - 5.5" small size combination plier wrench wire tool with a wire cutter, screwdriver, and tack puller advertised as "The Lightning" Patented by Arthur W. Hjorth of Jamestown, NY. Good++. (like Smith No. 75, C168, not in Schulz) *PAT*

0728. MISSOURI VALLEY WRENCH CLUB / YEAR 2014 NO. 3 OF 100 - - 5" miniature cast replica of an adjustable alligator wrench originally made by the M.M. Buck Company of St. Louis, Missouri and produced as Cochran's Universal Pipe Wrench. Patent was granted to James M. Cochran of Jackson, Tenn. on Oct. 16, 1894. Wrench is number No. 3 of 100 and is in excellent condition. From 2011 to 2020 Everett Sheffield from Somers, Mont. designed and cast scale models of different antique wrenches. Each year (except 2016 when Everett was having health issues) he made 100 wrenches and donated them to the Missouri Valley Antique Wrench Club. One was given to each person who registered for the annual spring meeting. If any were left they were available for sale to wrench club members and they very quickly sold out. Sadly there won't be any more as Everett passed away Jan 5, 2024. *PAT*

0729. Lot of 4: Miniature Tools
(1.) Unmarked - - 4.25" cigar box claw hammer and pry bar. One claw of the nail puller is missing.
(2.) Unmarked - - 3.75" miniature metal pliers. Excellent.
(3.) MARX (Louis Marx and Co, - NY, NY) - - 4.24"" miniature plastic hammer made by Marx, the toy manufacturer. Excellent.
(4.) BUILD BETTER MISSOURI - - 4.25" miniature plastic claw hammer. Light makings.

0730. BARCALO BUFFALO USA - PAT D111564 - - 6.25" combination tool with a hammer, screwdriver, lid lifter, alligator type jar, bottle opener and can opener and a pouring spout former. Patented Nov. 4, 1938 by Ernest Cullen (San Diego, Calif.) as a "Combination Kitchen Tool". Good++. (not listed) *PAT*

PiCs Lots 725 thru 730

0731. HONG KONG - - 3.75" Crescent type wrench with hex box opening on the end of the handle. Excellent.

0732. 4IN. CRESCENT / CRESCENT TOOL CO. JAMESTOWN, NY - - 4" older style and markings Crescent wrench. Jaws slightly sprung.

0733. 4" WARDS MASTER QUALITY - - 4" Crescent type wrench. Excellent.

0734. 4 IN 704 PROTO MFD USA - - 4" Crescent type Wrench. Excellent.

0735. BARCALO FORGED / 4 INCH BUFFALO - - 4" Crescent type with distinctive tulip shaped hang hole.

0736. 4 IN CRESTOLOY STEEL MAD IN USA / CRESCENT TOOL CO. JAMESTOWN NY - - 4" Crescent wrench. Good+.

0737. MCCOWANS / TOFFEE - - 4" candy hammer.

0738. CHARLES DERBY CIGARS 5 CENTS / LA FENDRICH CIGARS 5 CEN TS - - 4' cigar box opener with twin hammer heads. (see the Hammer Book page 121)

0739. CHARLES DERBY CIGARS 5 CENTS / LA FENDRICH CIGARS 5 CEN TS - - 4' cigar box opener with twin hammer heads. (see the Hammer Book page 121)

0740. J. H. WAGONER / MAPACUBA CIGAR - - 4.25" claw hammer type cigar box opener. (see the Hammer Book page 121)

0741. DAIRY MAID (in script) - - 3.5" miniature candy sledge hammer

0742. PAT MAR 13, 1877 - - 5" combination screwdriver with five different wrench sizes. Patented by Willis Gold of Philadelphia, Penn. and probably mfg. by H. Disston and Sons (as the Excelsior Wrench and Screw Driver). Also seen marked "Domestic". Good++. (Not in Schulz, C118) *PAT*

PiCs Lots 731 thru 742

0743. FALCON - PAT. SEPT. 1, '91 - WARRANTED (with two Mossberg "M" in a diamond logos) - - FRANK MOSSBERG CO - ATTLEBORO, MASS. - - 5.75" self adjust alligator wrench. Patent No. 458,934 was granted to John S. Barden of East Providence, Rhode Island. Wrench can also been found marked " H.F. Jenks Pawtucket R.I.", Excellent. (S1088T) *PAT*

0744. Lot of 3: Versions of the alligator wrench made by The Hawkeye wrench Co. of Marshalltown, Iowa. Patent was granted to Charles Benesh of Wahpeton, ND on Feb. 17, 1903 *PAT*
(1.) CROCODILE - MADE IN USA - HAWKEYE - HAWKEYE WRENCH CO. - MARSHALLTOWN, IA - - 8.5" alligator wrench with rethreading dies and screwdriver on the end. Excellent.
(2.) THE HAWKEYE - MADE IN USA - HAWKEYE - HAWKEYE WRENCH CO. - MARSHALLTOWN, IA - - 8.5" alligator wrench with rethreading dies and no screwdriver on the end. Excellent.
(3.) Marked only ALLIGATOR - - 8.5" alligator wrench with rethreading dies and screwdriver on the end. Good++.

0745. CLIMAX 2 - PAT. APL'D FOR - - 10" single jawed alligator wrench with replaceable jaw inserts and large, bold markings. Only second or third one I have seen. Good++. (not listed, patent not found)

0746. BONNEY BABY VIXEN - ALLENTOWN PA / MADE IN USA (Bonney's "B" in shield logo) - - 5.25". Double ended alligator wrench with rethreading dies. Scarce, small wrench in Excellent like new condition. (for larger size see S8, C73)

0747. COLE 8 - - 8.25" self adjusting wrench. Never had another to sell Good++. (not listed, no info found)

0748. WOLVERINE - PAT JUNE 1, 09 - - 11" alligator wrench with a sliding tee handle and a head that rotates 360 degrees. Patented by John Drake of Decatur, Illinois as a nut wrench. Ex Herb Page Collection. Excellent. (S88, C120) *PAT*

PiCs Lots 743 thru 748

0749. Unmarked (Buzzell's patent) - - 13.5" rare adjustable alligator wrench with a wooden handle. Patented by George H. Buzzell of Boston, Mass. on Oct. 14, 1890. Good++ with minor handle cracks. (see S24 for an all metal example) *PAT*

0750. Unmarked (Buzzell's Pat. Oct. 31, 76) - - 9.5" cast quick adjust tee handled basin wrench with a slide and set screw adjustment. Patented by George H. Buzzell of Boston, Mass. Excellent. (S89) *PAT*

0751. Unmarked (Kern patent) - - 14" screw adjust alligator wrench with a center threaded bolt adjustment and a wood knife type slab handle. Patent No. 504041 was granted to Samuel E. Kern of Bellevue, Ohio on Aug. 29, 1893. Rare alligator wrench, another one seen was all metal, this is the only wood handled one I have seen. Purchased at Jim Plantikow's 2020-2021 auction. Excellent. (not listed)  PAT.

0752. McNAIR WRENCH - MEADVILLE, PA / PAT'D MAR. 21, 82 - NO 5 - - 12". Push a spring-loaded plunger to open the jaws which close automatically. Patented by Milton H. McNair of Meadville, Penn. Good+. (S694) *PAT*

0753. Unmarked - - 14.75" crude adjustable alligator wrench. May be blacksmith made. Excellent.

0754. Marked only: "14" (David Bradley)- - 9.5" all malleable cast sliding wedge adjust alligator wrench, smooth jawed nut wrench version. Pat 1-6-1891 by Theodore Vandegrift of Shelbyville, Indiana and mfg. by the Vandegrift Mfg Co of Shelbyville, Indiana. . Listed in David Bradley Farm Equipment Parts Lists. Excellent like new condition. Best condition of any I have seen. (S546, C313) *PAT*

0755. Unmarked (Vandegrift's patent) - - 10" wood handled version of the Vandegrift sliding wedge quick adjust alligator wrench (smooth nut jaw variant). The Vandegrift alligator type wrenches were patented by Theodore Vandegrift of Shelbyville, Indiana on Jan. 06, 1891 (Pat. No. 444171) and mfg. by the Vandegrift Mfg Co in Shelbyville. Good++. (S724, C313) *PAT*

0756. Unmarked - - 10.25" all metal turn the handle to adjust the lower jaw pipe wrench. First one I have seen. Good+ with minor dings. (S645)

0757. D. P. FOSTER - PAT FEB 15, 1859 - - 10.75" wood handled screw adjust wrench advertised by D. P. Foster of Shelburne Falls, Mass. (later Waltham, Mass.) as "Foster's Unyielding Grip Wrench" for nuts and pipe. Rare early pre Civil War wrench. Excellent. (not in Schultz, C139) *PAT*

PiCs Lots 749 thru 757

0758. Clean-up lot of 10: Wrenches cast 113 (Mound City Lawn Mower), cast 413. IHC G3173, aluminum Rain Bird, Wix aftermarket oil drain plug wrench, CRAFTSMAN 5429-50 welding wrench, forged BLUE-Point doe, CONTINENTAL 25254D long soe and a 624 RAY L-shaped double socket wrench.

PiCs Lot 758

0759. BOSTWICK'S STANDARD - ROLLER PIPE WRENCH - PAT'D FEB 6, 1883 - - 11.5" wood handle screw adjust pipe wrench with a bottom roller jaw. Patented by Seymour Bostwick of Chelsea, Mass. Excellent. (S632, C74) *PAT*

0760. WALWORTH MFG. CO. - BOSTON USA - - 13" wooden handle quick adjust with an unusual rack type adjustment. Good++. (S728)

0761. Unmarked - - 12.5" unique rack teeth type quick adjust wooden handled wrench. Adjusted with a lever and has a rotating tab to lock the jaws in place. Looks like it's may be a prototype. Never seen another. Excellent (S1083, with no info. Probably the same wrench as this one)

0762. PATENTED JUNE 30, 1891 / PATENTED JUJNE 30, 1891 - - 13" all metal plier type pipe wrench with a screw adjusted lower jaw. Patent No. 454917 was granted to Henry Phillips of Chicago, Illinois. First one we have had to list. Good++. (S648 with no info, C250) *PAT*

0763. ECLIPSE 3 PAT JULY 24, 1900 / H. W, & M CO RICHFORD NY - - 14" quick adjust rack type pipe wrench with a button release. Mfg by Hilts wrench & Machine Mfg. Co. Good++, adjustment need a little work. (S667, C167) *PAT*

0764. PITKIN MFG. CO. - PROV. R.I. - HATHAWAY'S PAT. FEB. 2, 1886 - - 14" wood handled threaded shaft screw adjusted pipe wrench with a lever that realizes the upper jaw. Only second one we have had to sell and it was 10" long, Good++ except for an area with a manufacturing flaw?. (S613, C251) *PAT*

0765. NO 514-14 - PATENT PENDING - BERNARD - W. SCHOLLHORN CO. - NEW HAVEN, CONN. -MADE IN USA - - 12" all metal pipe wrench similar to a Stillson but with a different type adjusting nut and jaw assembly. Patent issued to William Alexander Bernard of New Haven, Conn. on Jun. 10, 1930. Bernard had around fifty patents for pliers and other hand tools and several models of Schollhorn Bernard brand pliers have been seen. The company was absorbed by the Sargent Co. in 1948. Excellent. (not in Schulz, see C274) *PAT*

0766. Unmarked - - 13" all metal rack type quick adjust pipe wrench. Slide a button to release the lower jaw. Don't think I have seen one before. Good+ with minor jaw segment chips and minor pitting. (not listed, no info found)

PiCs Lots 759 thru 766

0767. Marked only BONNEY and Bonney's shield logo. Others seen were marked "Vise & Tool Wks - Phila, Pa -The Masterpiece - Established 1876 / Patented Mar 3, 1903 - Aug. 9, 1904." - - 13" wood handled Briggs type combination nut and pipe wrench with a pipe cutter attachment and four ring adjusting sleeve. Patents were granted to Charles S. Bonney of Portsmouth, Ohio and Joseph G. Baker of Philadelphia, PA. Ex Her Page Collection. Good++. (S567, C73) *PAT*

0768. Unmarked (Souders' Oct. 4, 1887) - - 8.5" malleable combination carpet hammer, and tack puller with a long hammer poll, Patented No. 371106 was issued to Jacob Souders of Greentown, Ohio. Excellent. (Hammer Book 35-10) *PAT*

0769. Unmarked - - 13" wooden handled claw hammer with a nail claw, staple puller and notches under the claw to be used as a alligator type nut wrench. Patented by John Hebblethwaite of Rock Falls, Illinois on Sep. 11, 1888. Advertised in the 1915 Sears & Roebuck catalog as the Fulton Utility Hammer. Good++ with some dings, handle marked CHANCELLOR is probably a replacement. (S796, c163, Hammer Book page-7) *PAT*

0770. Unmarked (Longshores Oct. 23, 1866 patent) - - 9.75" combination stove lid lifter tool with a hammer, pliers, pinchers, pot lifter, dish lifter, tack puller, etc. Patent was issued to J. C. Longshore of Mansfield, Ohio. 1868 advertisement states over 200 sold at the Iowa State Fair in a few days. Good+. *PAT*

0771. CHURCH BROS- 39 / CHURCH BROS.- ADRIAN MICH - 38 - - 15" malleable combination fencing tool with an open ended wrench. Good++. (Smith's Fencing Tool Book-97)

0772. Marked only F3 - - 9" cast L-shaped socket handle with four cast sockets marked A21, A22, A26 and A30. Excellent. (no info found)

0773. "DOMESTIC" (on the blade) and PAT'D MAR. 13, 1877 (on cast handle) - - 4.5" combination screw driver with hex wrench opening (two sizes) in the cast handle. Patented by Willis D. Gold of Philadelphia, Penn (Pat. No. 188,243) and mfg. by Henry Disston & Sons also of Philadelphia. Excellent. (S831) *PAT*

0774. PAT OCT 9, 83 (Marshal patent) - - 7.5" cast combination tool with a vise or nut-cracker, wrench or pliers, pot lifter, tack puller, pruner, wire-cutter, can opener, etc. Patent No. 286458 was issued to Charles E. Marshall of Lockport, NY. *PAT*

0775. PATENT APP' FOR - MADE IN USA / FORGED TOOL STEEL (John Morris patent) - - 9" adjustable nut wrench with an alligator wrench on the end. Coe's monkey wrench type adjustment variation. Probably the oldest version of Morris's Economy Wrench patented Aug. 04, 1908. Ex Herb Page Collection. Good+, refinished. (S40) *PAT*

0776. THE - TEDDY / FORGED - STEEL - INDEP - MO. - MADE U.S.A - - 9" John Morris' combination alligator wrench, hammer and screwdriver. One of several known variations. Ex Herb Page Collection. Excellent with "The-Teddy" in extra large, bold markings. (like S40 but with different markings, no patent found)

PiCs Lots 767 thru 776

0777. Unmarked - - 11.5" combination rack type quick adjust nut and pipe wrench with lever to tighten the jaws with a hammer, nail claw and wire cutter. Rare combination tool advertised as Tritt's Lambert Patent. Manufactured by Edward C. Tritt of Union City, Indiana. Patent No. 712552 was issued to Charles M. Lambert of Darke County, Ohio on Nov, 4, 1902. Excellent with original nickel plating. (see S806 for variant.) *PAT*

0778. Unmarked - - 11.25" cast hammer, nail claw and two open end wrenches combination tool. Don't think I have listed this one before? Good++.

0779. Unmarked - - 12.5" combination cast buggy wrench and bootjack with one open end wrench and a nail claw?. Excellent. (Hammer Book 101-1, See S217 for an example without a hammer poll or nail claw)

0780. BOOT JACK - - 13" combination bootjack and buggy type wrench. Similar to ones seen marked "Pittsburgh Novelty Works". Larger wrench openings than seen before. Later example? Good++.

0781. BOOT JACK - - 13.25" combination bootjack and buggy type wrench. Similar to ones seen marked "Pittsburgh Novelty Works". smaller openings than one above. Good++with overall casting roughness. (see S217)

0782. E. RIPLEY'S PATENT - APRIL 7, 1857 (same markings on both sides) - - 12.25" malleable iron combination hammer and rack type quick adjust wrench. An early pre Civil war patented combination tool. Good++. (S824) *PAT*

0783. FARMER'S EVER READY TOOLKIT / DROP FORGED STEEL - - 11.5" combination fencing tool with a hatchet, hammer, alligator wrench, pliers, screwdriver. etc. Good+ (Smith Fencing Tool Book No. 20, S803)

PiCs Lots 777 thru 783

0784. EDWIN LOUDERBACK & CO - PHILADELPHIA, PA - PATD MAY 1, 1883 / CAST STEEL DROP FORGING (some faint markings) - - 11" (larger size) combination. tool with at least 10 functions including several plier type tools, punch, hammer, cutter, vise, screwdriver bit (which is often missing), etc. Patented by Robert Erdman & William Phillips of Philadelphia, Penn. Good++. (S817, C204) *PAT*

0785. J. C. BROWN'S PAT - - 11" heavy malleable combination pliers type tool with a hammer, pinchers, pliers, nut wrench and a screwdriver. No explanation found why tool is marked "J. C. Brown's Pat." when William Phillips's (Ashland, Nebraska) patent of Aug. 09, 1881 looks applicable. H. C. Brown was one of the patent witnesses. Good+. (see S826 for variant with buggy wrench type jaw extensions, Smith Fencing Tool Book page 76) *PAT*

0786. THE AMERICAN - PATENT / APL'D FOR - COMBINATION - - 9.5" cast household combination tool with two plier jaws, pot lifter, etc. similar but much rarer than the Handy No. 3 combination tool (see S813). Excellent. (not listed)

0787. Can't read number, should be "8" (Moline Plow Co) - - 10.5" combination wrench and claw hammer, hollow handle end variant . Good. (R1-332)

0788. Unmarked - - 13" different combination alligator wrench and claw hammer tool with a nail puller and square wrench cutout. Never seen this one before. Good++ except the nail puller is damaged. (not listed, no info found)

0789. 0382. Unmarked - - 8" malleable iron fancy combination hammer, hatchet, two wrenches, screwdriver, tack puller, pot lifter. Excellent. (Hammer book 102-4)

0790. ACME TOOL CO. - WAHPETON ND - PAT APL FOR - - 9.5" forged screwdriver with a square box opening (for Prest-O-Lite gas automobile lights?) and four rethreading dies. There is an Acme Tool Company in Wahpeton, North Dakota. Good++. (not listed, patent not found)

0791. IMP - 1-1/2$ -PATENTED. JUNE 29, 1869 - MAY 9, 1871 / DAVID HEATON SOLE MANUF'R - PROV. R. I. - - 9.5" cast combination tool. Patents were granted on Nov. 12, 1872 to David Heaton and on May 09, 1871 to Thomas Garrick both of Providence. According to the patent the tool has the following fourteen functions: A hammer, nail puller, cover-lifter, scraper, pair of pinchers, which also form an adjustable wrench, gas-burner tongs, nut-cracker and cork-presser, six-inch rule, screwdriver, box opener and a carpet-stretcher. Rarer improved model with different markings and a 1-1/2$ price instead of the original 50 cents. Excellent. (S799) *PAT* - - *PAT*

0792. Unmarked - - 9.75" malleable hammer, pick, screwdriver or pry bar end and six wrench openings, This looks like the snow knocker hammer shown on page 97 of the Hammer Book except that one has a open loop type handle without the wrench cutouts. Excellent.

PiCs Lots 784 thru 792

0793. Unmarked - - 8.5" all metal screw adjust pipe wrench. Different design, first one I have seen. Good with jaw lip chip, light pitting, over cleaned. (not listed, no info found)

0794. "VICTOR" TRADEMARK - PAT. DEC 23, 1902. PAT. - PAT. AUG 25, 1903 - - 8" quick adjust pipe wrench made by the Bonner Mfg. Co. of Chrisman, ILL. and patented by Clarence E. Bonner, Cherrypoint, IL. Good+. (S653) *PAT*

0795. FAIRBANKS-MORSE (Beloit, Wisc.) - - 8" automobile type adjustable gas engine wrench. Good++, refinished. Ex Herb Page Collection. (R3-79)

0796. PAT'D JUNE 76 / ??????E MFG. CO. - - 8" McCormick's patent screw adjust malleable nut wrench with hammer face. Rarer small size. Patent was granted to Robert Hall McCormick and William R. Baker both of Chicago, Illinois on Jul. 27, 1875 and reissued on Jun. 13, 1876. Good++. (see S963) Good++. *PAT*

0797. THE D & M CO. (Doolittle & Whitehead) - WALLINGFORD - CONN. - - PAT'D MAR. 21, 1911 - - 8" unique all metal screw adjust nut wrench with angled jaws. Patented by Etbridge. C. Doolittle, Of Walling Ford, Conn. Only sold one other (on the 2010 Dough Busch Auction, this look like that wrench). Ex Herb Page Collection. Good+, refinished. (S422) *PAT*

0798. Only readable markings are SON (Taft & Gleason, Worcester, Mass.?) - - 7" Taft style Railroad and Mower Wrench with an unusual extended upper jaw. Cope shows an 1860's ad for Taft & Gleason illustrating a Taft Railroad wrench with the extended upper jaws. Rare early small example of a Taft Railroad style wrench. Good++. (C29)

0799. ERIE TOOL WORKS - ERIE, PA. USA / AUTO NO. 0 - - 6" self adjust wrench with pivoting upper jaw. Good+. (S337)

0800. B & C - TRADEMARK (in a circle logo) / BILLINGS - MADE IN USA and a "B" in a triangle logo - - 6.5" Coes type monkey wrench with knife type slab handles. Last of the wood handle Coes monkey wrenches made. Excellent, like new. (see S845)

0801. COLLINS & CO - HARTFORD USA -/ "M" in a star logo - - 6" wood handled monkey wrench with distinctive hex handle ferrule and extended adjusting screw support plate. Patented by Leander E. Smith of Southington, Conn. on Oct. 10, 1865. Ex Herb Page Collection. Good+++. (S384, C107) *PAT*

0802. GORDON - AUTOMATIC - PAT'D USA (William Gordon of Union, NJ) - - 7" combination screw and quick adjust nut wrench with angled jaws. First one I have seen. Patent isn't on DATAMP but it's Patent No. 2502407 issued to William Gordon of Union, NJ on March 28, 1950. See Schultz 492 and 493 and Cope page 146 for other types of Gordon Automatic Wrenches. Excellent. (not listed) *PAT*

0803. GOODELL-PRATT C0 - GREENFIELD, MASS. USA - PATENTS PENDING - - 6.75" lever operated quick adjust wrench that was advertised for use on both square and hex nuts and round rods. Patented May 29, 1923 by George W. Cary of Greenfield, Mass. and produced as the Chauffeurs Universal Wrench. Different markings than others seen. Ex Herb Page Collection. Excellent. (S888) *PAT*

PiCs Lots 793 thru 803

Choice Box Lots (will be sold choice item from each lot)

CB001 (lot of 5) - #1. Avery 5089 3 socket variation. #2. Avery 5089 4 socket variation. #3. Acme S 852. #4. Briggs and Stratton 68652. #5. Brown Manly 1 AA.

  PiCs Choice Lot 1

CB002 (lot of 5) - #1. Case 025W. #2. Case 026W. #3. Case 027W. #4. Case 028W. 5 Case 028W with deeper stamping at an angle.

  PiCs Choice Lot 2

CB003 (lot of 6) - #1. JI CASE PLOW WORKS 4108 with embossed P on back #2. JI CASE WKS 359. #3. Case 01940 AB. #4. Case W76583. #5. Case W 7659S. #6 Case W 7660S.

  PiCs Choice Lot 3

CB004 (lot of 4) - #1. Case Eagle 3329 A. #2. Case Eagle 3330 A. with 1/2" drive socket welded to the end. #3. Case Eagle 01982 AB Made in USA (indent deep) #4. Case Eagle 01982 AB Made in USA (indent medium)

  PiCs Choice Lot 4

CB005 (lot of 3) - #1. Case Plow 46 CL (impressed) #2. Case Eagle 46 CL (embossed) #3. Case Eagle 5524 T.

  PiCs Choice Lot 5

CB006 (lot of 5) - #1. A 504 Gehl. #2. 21 Gale. #3. 12 Gale. #4. Economy King with (P-0 mark on back) #5. EMERSON with large open end on the right.

  PiCs Choice Lot 6

CB007 (lot of 5) - #1. 2234 Massey Harris with MH on the back (pitted) #2. 832 A David Bradley. #3. 24-1000 Du-AL with H 159 on back side. #4. DELAVAL separator wrench. #5. 480 DELAVAL SEPARATOR CO.

  PiCs Choice Lot 7

CB008 (lot of 5) - #1. W 402 Emerson. #2. B 22 David Bradley. #3. 333 F Garden City Feeders. #4. 884 Frost & Wood. #5. 10 Empire Plow.

  PiCs Choice Lot 8

CB009 (lot of 5) - #1. P 20 Ellwood A Co. #2. 883 C Case. #3. 3 Kingman Plow (pitted). #4. M-H 6 5/8" long.

  PiCs Choice Lot 9

CB010 (lot of 5) - #1. HX5+ MOLINE PLOW. #2. 202783 m1 (M-H) SPARK PLUG WRENCH #3. N 81 KINGMAN PLOW CO. (Pitted). #4. A Minneapolis Threshing Machine. #5. 274 A Massy-Harris. #7. A164 Minnesota

  PiCs Choice Lot 10

CB011 (lot of 5) - #1. J M Co Janesville Machine. 2 periods variation. #2. S 982 (M-H) Massey Harris. #3. T 147 Grand Detour Plow. #4. (M-H) stamped steel 9" long. #5. D 239 Kingman Plow.

  PiCs Choice Lot 11

CB012 (lot of 4) - #1. A-76 Minnesota. #2. Disk dot Janesville Machine. #3. PR 40 Sattley. #4. D 203 Moline Plow.

  PiCs Choice Lot 12

CB013 (lot of 5) - #1. A Janesville Machine. #2. 591 Papes. #3. V 4179 Rock Island stamped steel 7" long. #4. KW8 Rock Island. #5. R 1122 Rock Island.

  PiCs Choice Lot 13

CB014 (lot of 4) - #1. 106 S Papec. #2. 1126 A Moline Plow. #3. L 298 New Idea. #4. C 188 Rock Island.

  PiCs Choice Lot 14

CB015 (lot of 7) - #1. Montgomery Ward(Rathbone vol 2 bottom picture page 208. #2. 108 W PUROX. #3. A 270 MONITOR DRILL. #4. K 48 Planet Jr. cutout. #5. 2 Planet Jr. cutout. #6. 3 Planet Jr. cutout #7. 3 Planet Jr. (on back Made in the United States of America)

  PiCs Choice Lot 15

CB016 (lot of 5) - #1. C 111 Roderick Lean. #2. C Samson tractor (pitted). #3. K Y 103 Rock Island (pitted) #4. 397 Superior Drill. #5. D 561 Peoria Drill.

  PiCs Choice Lot 16

CB017 (lot of 4) - #1. No 2 E. C. Tecktunius Mfg. Co (welded) #2. D 127 Sterling M F G Co. #3. D 3J31 Rumely. #4. B Samson or Belcher & Taylor.

  PiCs Choice Lot 17

CB018 (lot of 6) - #1. F 97 A Dowagiac. #2. THE SHARPLES SEPARATOR CO(back) TUBULAR (open end down. #3. THE SHARPLES SEPARATOR CO (back) TUBULAR (OPEN END UP. #4. 95 H in C logo Vulcan Plow. #5. 95 VULCAN PLOW CO. #6. VULCAN PLOW CO (back) EVANSVILLE IND.

  PiCs Choice Lot 18

CB019 (lot of 4) - #1. Morrison 160 (welded) #2. Rock Island stamped steel 7" long. #3. Sattley1072 (crack). #4. WOOD (pitted bad)

  PiCs Choice Lot 19

CB020 (lot of 6) - #1. UNADILLA SILO CO (pitted). #2. No. 9 Maytag. #3. N 19 STANDARD. #4. 888 C Case (pitted and one end modified) #5. Separator wrench 6 3/4" long (not marked). #6. sattley golden harvest.

  PiCs Choice Lot 20

CB021 (lot of 8 Alligator Wrenches) - #1. W&B CO 1 (one jaw tip missing. #2. No name stamp steel. #3. No name cast . #4. V&B 1 on back. #5. 21 ??OAN . #6. ROEBLING ALLIGATOR PATD with 1 on back stamped steel. #7. ROEBLING cast steel (pitted). #8. AMERICAN SAW CO TRENTON. NJ ALLIGATOR PAT'D

  PiCs Choice Lot 21

CB022 (lot of 8 Alligator Wrenches) - #1. W&B CO with 1 on back. #2. S H CO SUPER GRIP (PAT July 2#6.98 with 40 on the back. #3. AMERICAN SAW CP TRENTON NJ AUG 31 1875 (hard to read). #4. W-B (in diamond) back No 1 1/2. #5. WRETH PAT JULY 2#5.43 (back 12. #6. W&B in diamond MADE IN USA (back) No1 BULLDOG. #7. S H CO SUPER GRIP (PAT July 2#6. 98 (back) 40. #8. No name 1 only.

  PiCs Choice Lot 22

CB023 (lot of 8 Alligator Wrenches) - #1. VAUGHN & BUSHNELL MFG. #2. MADE IN W&B (in diamond) USA (back) No 1. #3. V&B (back) 101. #4. V&B (back) 101 (both marked in diamond. #5. W&B (in diamond) MADE IN USA (back 1. #6. VAUGHN & BUSHNELL MFG No 1. #7. BUHL SONS CO . #8. W&B (in diamond) MADE IN USA (back) BULL TERRIER.

  PiCs Choice Lot 23

CB024 (lot of 5 Alligator Wrenches) - #1. VAUGHAN& BUSHNELL MFG CO TWIN. #2. VIXEN (X is larger) other unreadable. #3. PATENED APRIL 3 190#6. #4. No name. #5. THE K&B CO. NEW HAVEN. CT. SAXON (X is larger)

  PiCs Choice Lot 24

CB025 (lot of 5 Alligator Wrenches) - #1. EDMONDS METZEL MFG CO CHICAGO PATENTED APRIL #3. 190#6. #2. PAT. NO 72055#4. PAT'S PENDING (back) HAWKEYE WRENCH CO MARSHLTOWN. THE HAWKEYE. #3. THE HAWKEYE. MADE IN USA. HAWKEYE WRENCH MARSHALLTOWN. NJ. #4. No name 3/8" thick. #5. EVER READY (thin)

  PiCs Choice Lot 25

CB026 (lot of 5 Alligator Wrenches) - #1. N (o missing) BULLDOG (back) MADE IN USA. #2. W&B in diamond. #3. V&B PAT JULY25 (back) 1#3. #4. MFG BY ROEBLING TRENTON NJ. ALLIGATOR WRENCH PAT FEB 8 1896 No 2. #5. VAUGHAN & BUSHNELL MFG CO. No 2.

  PiCs Choice Lot 26

CB027 (lot of 3 Alligator Wrenches) - #1. VAUGHAN & BUSHNELL MFG CO CHICAGO USAW. #2. W in diamond. MADE IN USA No #3. Printing both side unreadable (pitted)

  PiCs Choice Lot 27

CB028 (lot of 3 Alligator Wrenches) - #1. W&B in diamond (back) No 3 (3 3/8"). #2. W&B in diamond (back) No. 3 (3-1/2") #3. W in diamond (back) No 3 BULLDOG (hard to read.

  PiCs Choice Lot 28

CB029 (lot of 3 Alligator Wrenches) - #1. WRENCH MFG BY ROEBLING TRENTON NJ PAT FEB 8 1898 No #4. #2. AMERICAN SA? TRENTON ?? NO 4 . #3. Home made

  PiCs Choice Lot 29

CB030 (lot of 4 IHC Wrenches) - #1. P 459 OSBORNE IHC. #2. 19495 HA unmarked. #3. P 1189 IHC logo. #4. 3613 P&O CO CANTON ILL.

  PiCs Choice Lot 30

CB031 (lot of 5 IHC Wrenches) - #1 45662- DA IHC logo. #2. 2588 T Steel screwdriver IHC. #3. 10720 D 7/8 x 7/8 no ridge IHC. #4. 373942 R1 IHC logo 1 1/8. #5. 12737 D IHC logo F in front (pitted)

  PiCs Choice Lot 31

CB032 (lot of 5 IHC Wrenches) - #1. 1059 B IHC logo D on front. #2. 1595 E IHC logo (small) variation. #3. 9118 engraved 2 logo variation. #4. 4135 P&O CO CANTON ILL. #5. 1595 E IHC logo

  PiCs Choice Lot 32

CB033 (lot of 6 IHC Wrenches) - #1. 373941 R2 IH logo 1-5/16. #2. 2155 only. #3. 1595 E S wrench IHC logo 7/16 3/8 marked. #4. P 1599 on both sides IHC logo. 2 on front. #5. 21264-D IHC logo first. #6. 1595 E Str wr. IHC logo large variation

  PiCs Choice Lot 33

CB034 (lot of 6 IHC Wrenches) - #1. F 9136 IHC logo 3 on back. #2. G-3170 IHC logo. #3. R 319 emb. Dot after # (back) IHC logo (pitted). #4. 271 NL IHC logo. #5. 21264 D indented. #6. 1691 E not marked (pitted)

  PiCs Choice Lot 34

CB035 (lot of 6 IHC Wrenches) - #1. P 28 1/2 emb. Logo mark. #2. 5378 TM number light. #3. U 50 CANADA IH 1 on socket #4. CHATTANOOGA CP 4003 with IHC logo on back. #5. G 3 5 2 6 IHC logo first. #6. 1325 EA indent with logo first

  PiCs Choice Lot 35

CB036 (lot of 6 IHC Wrenches) - #1. R 172 impressed IHC logo. #2. H 523 1/2 emb. With dot after number. #3. H 523 1/2 emb. No logo. #4. H 523 1/2 emb. With star on back. #5. H 523 emb. Straight wrench (pitted). #6. H 523 emb. Curved wrench

  PiCs Choice Lot 36

CB037 (lot of 5) - #1. 344 S crank with logo. #2. P 3156 imp. Mc and IHC logo. #3. P 1599 IHC logo on one side. #4. U 219 imp. IHC logo

  PiCs Choice Lot 37

CB038 (lot of 6 IHC Wrenches) - #1. S 5379 stamped steel not marked. #2. ST 52 stamped steel not marked. #3. St 53 stamped steel not marked. #4. ST 54 stamped steel not marked. #5. P 1183 emb. IHC logo. #6. P 1 1 8 3 emb. IHC logo

  PiCs Choice Lot 38

CB039 (lot of 4 IHC Wrenches) - #1. PO 209 IHC logo 13 11/16 long. 2. P 230 cast iron oil can holder. #3. G 261 IHC logo emb. With MOWER on other side. #4. M 141 IHC logo (badly pitted)

  PiCs Choice Lot 39

CB040 (lot of 5 IHC Wrenches) - #1. 632 LA. w/IHC logo . #2. 67479 C1 3/4" deep socket. #3. ZA 810 emb. With logo on back. #4. ZA 810 emb. With dot below number. #5. ZA 810 imp. With logo on back

  PiCs Choice Lot 40

CB041 (lot of 5 IHC Wrenches) - #1. B 573. #2. Z 810 with no logo . #3. Z 810 With logo byt faint. #4. R 28 CHAMPION with logo and hang hole. #5. R 28 with no logo and hang hole.

  PiCs Choice Lot 41

CB042 (lot of 7 IHC Wrenches) - #1. Q-5027 With logo and 3 on the back. #2. D 736 Marked PITMAN only. #3. D 736 DEERING in ledger plate. #4. 509 imp. . #5. Z 811 imp. with logo. #6. Z 812 imp. With logo on back. #7. 52393 VA BUDD 18806

  PiCs Choice Lot 42

CB043 (lot of 4 IHC Wrenches) - #1. T 560. #2. L 9 imp. 5 hole with 6 hole broken out. #3. 295 marked on top with 1 on the bottom. #4. SA 1406 with logo on the back.

  PiCs Choice Lot 43

CB044 (lot of 4 IHC Wrenches) - #1. 45662-DA with logo. #2. 45662 DA with smaller logo. #3. 45662-DA with logo and number marked deeper. #4. 45662-D with logo

  PiCs Choice Lot 44

CB045 (lot of 5 IHC Wrenches) - #1. 12335-D logo and no indent. large end right and down. #2. 12335-D Logo and no indent. with large end left and up. #3. 12335-D IHCCO-. #4. 12335-D IHCCO and logo on back. #5. 12335-D IH CO with logo and F on back.

  PiCs Choice Lot 45

CB046 (lot of 7 IHC Wrenches) - #1. U 50 CANADA IH with 1 on the socket. #2. U 50 IHC logo with possible 7 below the number. #3. U 50 IHC logo emb. #4. 10465 CX with logo. #6. R 319 imp. With log and D on the back & circle. #7. 5 CHATTANOOGA curved down.

  PiCs Choice Lot 46

CB047 (lot of 5 IHC Wrenches) - #1. 5283 Logo and square hole. #2. 5283 P&O CO. #3. 10720 D with no ridge. #4. 4725 D with no ridge. #5. 4725 D with ridge.

  PiCs Choice Lot 47

CB048 (lot of 5 IHC Wrenches) - #1. 363021-R1 IH logo 1 5/16 & 1 1/8. #2. L 9 solid handlw. #3. UA 51 upside down with IHC logo 5/16". #4. UA 51 upside down with IHC logo 1/4" and CANADA on back. #5. U 51 IHC logo

  PiCs Choice Lot 48

CB049 (lot of 6 IHC Wrenches) - #1. 4129 P&O CO CANTON ILL #2. 4135 P&O CO with CANTON ILL on back and pitted hard to read. #3. 12737-D IHC logo and hard to read. #4. 12737 -DA with logo first. #5. G 3525 with logo first. #6. 924 C with logo

  PiCs Choice Lot 49

CB050 (lot of 9 IHC Wrenches) #1. G 3 1 7 1 with logo. #2. G 3171 with logo. #3. G 3172 with 1/4" numbers. #4. G 3172 with 1/4" numbers. #5. G 3172 With logo and 3/16" numbers. #6. IHCO-G 3525 with 3/16" numbers. #7. 376 3/8 x 5/16. #8. 383 11/16 x 5/8 upside down. #9. 379 9/16 x 7/16.

  PiCs Choice Lot 50

CB051 (lot of 5 IHC Wrenches) #1. G 3526 with logo. #2. IHC 3526 with 3/8" numbers. #3. 1595 E S wrench 7/16 x 3/8. #4. 1595E S wrench with no size marked. #5. 1595 E S wrench 7/16 x 3/8 small 1/4" numbers

  PiCs Choice Lot 51

CB052 (lot of 4 IHC Wrenches5) - #1. 23966 D unmarked. #2. 517481 R 91 unmarked. #3. 66335 D with logo. #4. 14327-L IHCo (Williams 207)

  PiCs Choice Lot 52

CB053 (lot of 3 IHC Wrenches) - #1. IHCO G 38661/2" numbers. #2. G 3866 Ihco 1/4" numbers. #3. 3613-T 19/32 DROP 29 FORGED 25/32 and on the back MADE IN THE USA

  PiCs Choice Lot 53

CB054 (lot of 8 IHC Wrenches) - #1. G 3866 S wrench . #2. 1326 E straight wrench. #3. 1326-E straight wrench. #4. 1326-E straight wrench. #5. 373941 R2 1 5/16 IH. #6. 1326 E S wrench 3/8 X 7/16. #7. G 3166 pitted and has a crack. #8. S 5378 stamped steel not marked.

  PiCs Choice Lot 54

CB055 (lot of 6 IHC Wrenches) - #1. HE 911 imp. With dot and logo. #2. HE 911 imp. And logo. #3. HE 911 imp. and emb. Logo. #4. H 911 with X and logo and ear broken off. #5. H 911 and logo. #6. DEERING small letters. pitted.

  PiCs Choice Lot 55

CB056 (lot of 5 IHC Wrenches) - #1. SA 2126 unmarked. #2. SA 2127 unmarked. #3. SA 2128 unmarked. #4. P&O CO stamped steel 5/8 x 3/4. #5. P&O CO stamped steel 7/8 x 1".

  PiCs Choice Lot 56

CB057 (lot of 5 IHC Wrenches) - #1. P 28 with Dot pitted. #2. B 12189 binder crank not marked. #3. P 890 emb. With logo. #4. P 890 imp. with logo. #5. 271 N imp. With logo emb.

  PiCs Choice Lot 57

CB058 (lot of 7 IHC Wrenches) - #1. 999416 R1 3/4 drive 15/16 socket. #2. 999388 R1 1/2 drive 13/16 socket. #3. 999368 R1 3/8 drive 13/16 deep socket. #4. 999347 R1 3/8 drive 8 mm socket. #5. 999346 R1 3/8 drive 7 mm socket. #6. 32941-D with IHC logo spark plug socket. #7. 3012 Y socket not marked.

  PiCs Choice Lot 58

CB059 (lot of 5 IHC Wrenches) - #1. HD 911 imp. with emb. Logo. #2. HD 911 emb. Number. logo. and Dot. #3. HD 911 emb. Number and logo. #4. DEERING in ledger plate hard to read pitted. #5. DEERING with 3/8" letters and back plain.

  PiCs Choice Lot 59

CB060 (lot of 6 IHC Wrenches) - #1. RP 5415 not marked Oliver or IHC. #2. RP 5414 not marked Oliver or IHC. pitted #3. P 1183 emb. With no logo pitted. #4. M 231 with solid bar. #5. N 13with logo unreadable. #6. 41-E-1012-5 military ord. #A 323332 still with coating on it.

  PiCs Choice Lot 60

CB061 (lot of 9 Adjustable Wrenches) - #1. Wakefield wrench No 17 Made in WORCHESTER MASS USA. #2. HERBRAND 5 1/2". #3. U.S. in diamond MADE IN USA 5 1/2". #4. DIAMOND in diamond NO 10 Frank Mossberg Co. Pat Nov 13.00 Mar 11.02 (5"). #5. LACLEDE (5"). #6. Unmarked (7"). #7. DUNLAP APPROVED TOOLS 8". #8. PAT.APLD.FOR (6"). #9. PAT AUG2. 1921 MADE IN USA (5 3/4").

  PiCs Choice Lot 61

CB062 (lot of 6 Adjustable Wrenches) - #1. B.H.M. CORP. BRIDGEPORT. USA 9 in. #2. BECKLEY-RALSTON CO (9") #3. Wizard No 9 PAT'D NOV.14 ??22 rest hard to read. #4. WAKEFIELD No 19 WORCESTER MASS USA PAT'D NOV 14 1922 (9"). #5. F.T.F. CLEVE (9"). #6. BARCALO-BUFFALO MADE IN USA DROP-FORGED (9").

  PiCs Choice Lot 62

CB063 (lot of 3 Adjustable Wrenches) - #1. Vlcheck logo 18". #2. Herbrand "H" in diamond. #3. 9 IN AUTO.

  PiCs Choice Lot 63

CB064 (lot of 6 Adjustable Wrenches) - #1. KING-DICK MADE IN ENGLAND (7") #2. MADE IN ENGLAND (only). #3. FAIRMONT CLEVE. and on the back G (9"). #4. DIAMOND FORGED USA CC 712 horse shoe logo. #5. LAKESIDE in logo 9". #6. FAIRMONT CLEVE USA 11".

  PiCs Choice Lot 64

CB065 (lot of 5 Adjustable Wrenches) - #1. BUHL SONS CO on handle (9"). #2. BUHL SONS CO on jaw (9"). #3. HERBRAND FREMONT O. on back it has H in a diamond (9"). #4. HERBRAND script on jaw. #5. FAIRMONT U.S.A. (9").

  PiCs Choice Lot 65

CB066 (lot of 5 Adjujstable Wrenches) #1. McKAIG-HATCH BUFFALO.N.Y.U.S.A. with logo on head (9"). #2. McKAIG-HATCH BUFFALO.N.Y.U.S.A. (9"). #3. M in circle (10").#4. M in circle (9"). #5. MOORE 12" on handle

  PiCs Choice Lot 66

CB067 (lot of 4 Adjustable Wrenches) - #1. VLCHEK MADE IN USA 15 AUTO. #2. Unmarked different 9". #3. Vlchek LOGO back. 14 IN AUTO front. #4. BUHL SONS CO on jaw 11 1/2"

  PiCs Choice Lot 67

CB068 (lot of 5 Curved Handle CrescentType) - #1. WESTCOTT THE KEYSTONE MFG CO. 10 INCH NO 80. BUFFALO NY USA. #2. B&C on back 10 IN. #3. B&C on back 6 IN. #4. B&C on back 8 IN. #5. BULLOCK on back 8 IN

  PiCs Choice Lot 68

CB069 lot of 8 Crescent Type) - 6 #1. B&C 10 IN and on back NO 75. #2. B&C and on back 8 IN NO 80. #3. CRESENT 8 IN and on back PARENT PENDING & more. #4. UTICA TOOLS USA 91-8 (8"). #5. M in diamond K-9. PATD NOV 15.00.MAR 11.02. (does not adjust). #6. 8" HEAVEY DUTY and on the back CHROME VANADUM STEEL

  PiCs Choice Lot 69

CB070 (lot of 5 Crescent Type) - #1. ARTISAN 6in MADE IN USA. #2. DIAMALLY 8 in on back DIAMOND CALK HORSESHOE CO. #3. CRESCENT TOOL CO 6 in. #4. SCHOLLER 8. SCHOLLER MFG CO INC. BUFFALO N.Y. #5. GRIPSO VISE PLIERS MODEL 211 does not adjust.

  PiCs Choice Lot 70

CB071 (lot of 5 Vise Grip Type) - #1. HUSKY 5472 USA (9"). #2. SAMSON LEVER JAW WRENCH PAT. APPLD. FOR MADE IN USA. #3. LEVERAGE TOOLS INC. GLENVIL. NB 66941. usa (9 1/2"). #4. SHUR GRIP CO PAT-PEND ROCKFORD ILL (9"). #5. China 6"

  PiCs Choice Lot 71

CB072 (lot of 4 Vise Grip. Etc.) - #1. VISE-GRIP DEWITT. NEBR. USA US PAT No 2.280.005 APR 14 1942. #2. CHANNELLOCK INC MEADVILLE PA USA 910 GRIP LOCK. #3. BMC MFG CORP BINGHAMTON NY patent applied for (7"). #4. JAPAN

  PiCs Choice Lot 72

CB073 (lot of 4 Deere Wrenches) - #1. 31 number on right side web. #2. 31 number on left side web. #3. 10007 DEERE right side up 9" hole right up. #4. 10007 DEERE upside down 9" hole right up

  PiCs Choice Lot 73

CB074 (lot of 6 Deere Wrenches) - #1. 10008 DEERE right side up 11 1/2" hole right up. #2. 10008 DEERE upside down 11 1/2" hole right up. #3. 10006 1/2" right side up 6 3/4 in hole left up. #4. 10006 DEERE 5/16" right side up 6 3/4" hole on left up. #5. JD 53 7/16 in number square left up. #6. JD 53 3/8" number square left up

  PiCs Choice Lot 74

CB075 (lot of 7 Deere Wrenches) - #1. JD- 50 7/16. #2. J-D_50 3/8". #3. J-D 52 3/8 in D mis stamped. #4. J-D 52 1/2" square left up. #5. J-D 52 3/8" square left up. #6. J-D 52 3/8" square right down. #7. J-D 3/8" square left up

  PiCs Choice Lot 75

CB076 (lot of 5 Deere Wrenches) - #1. 196 2 square holes. #2. D 1083 R . #3. A 574 2 1/2" jaw 5/8" pin. #4. A 401 2 5/16" jaw . 5/8" pin. #5. GY 2256 1/4" thick

  PiCs Choice Lot 76

CB077 (lot of 5 Deere Wrenches) - #1. A 577 R offset 3". #2. A 577 R offset 6". #3. D 2063 R . #4. D 742 round handle at end. #5. D 2063 R MADE IN USA.

  PiCs Choice Lot 77

CB078 (lot of 4 Deere Wrenches) - #1. Deere 20306 19 1/4" long not marked. #2. Deere 14674 5/16" number in the center. #3. Deere 12277 not marked. #4. Deere F 3537 R 20 1/2" long with hex opening not marked

  PiCs Choice Lot 78

CB079 (lot of 3 Deere Wrench. Oil Can. Grease Gun) - #1. Deere E 6075 8 x 13 3/4 " . #2. JOHN DEERE new oil can black with 2 legs. #3. JOHN DEERE TY 15410 MADE IN USA grease gun.

  PiCs Choice Lot 79

CB080 (lot of 3 Deere Grease Guns) - #1. JD 7754 grease gun ALEMITE 6570. #2. JD 7751 grease gun ALEMITE 6556. #3. QA 3612 grease gun IHC Lincoln 1016.

  PiCs Choice Lot 80

CB081 (lot of 1 Deere Riveting Block) - #1. PK 361 H JOHN DEERE riveting block It does have one lip broken off.

  PiCs Choice Lot 81

CB082 (lot of 4 IHC Cylinder Wrenches) - #1. 486131 R1 IHC marked combine cylinder wrench. #2. MC 75811 IH logo with number on back combine cylinder wrench. #3. MC 75811 IH logo with number on front combine cylinder wrench

  PiCs Choice Lot 82

CB083 (lot of 7 IHC Wrenches) - #1. 2584 T ihc Bemis & Call number 80. #2. H 872 ihc binder crank marked. #3. 13071 D IHC logo 11 1/2" long. #4. 4E IHC logo adjustable. #5. 8118 with no logo and hard to read. #6. 11858 DA IHC logo and read towards spanner. #7.P 28 emb with dot IHC but no logo

  PiCs Choice Lot 83

CB084 (lot of 3 IHC Wrenches) - #1. PO 13596 IH logo emb on head of wrench. #2. 514585 R 91 ih not marked. #3. 366106 R1 IH wheel wrench not marked

  PiCs Choice Lot 84

CB085 (lot of 9 IHC 3170 Wrenches) - #1. IHC logo G 3170 (2) variation. #2. IHCO G 3170 with small F (10) variation. #3. IHC rd logo G-3170 (8) variation. #4. IHC logo G 3170 (2A) variation pitted. #5. IHCO G 3170 (4) variation. #6. IHC logo G 3170 (31) variation. #7. IHCO G 3170 with F (35) variation. #8. IHCO G 3170 (25) variation. #9. IHC logo G 3170 (20) variation.

  PiCs Choice Lot 85

CB086 (lot of 4 IHC 3170 Wrenches) - #1. IHC logo G 3170 (13) variation. #2. IHC logo G-3170 (19) variation. #3. IHCO G 3170 (46) variation pitted. #4. IHC logo G 3170 (37 variation).

  PiCs Choice Lot 86

CB087 (lot of 5 IHC Wrenches) - #1. F 9136 IHC log with 2 on the back. #2. F 153 unmarked and some pitting. #3. L9 with IHC logo 5 hole variation. #4. P 1599 IHC logo imp. On right side. #5. F 239 with 1 in rhe center and no logo

  PiCs Choice Lot 87

CB088 (lot of 5 Coes. Ect. Adjustable Wrenches) - #1. COES WRENCH CO WORCESTER MASS L COES PAT'D MAY 15 1900 STEEL 52 8" . #2. COES WRENCH CO WORCESTER MASS MADE IN USA UNDER COES PATS STEEL 53. 8". #3. AG COES & CO WORCESTER MASS PATENT DEC 28 75 23. 8". #4. COES WRENCH CO WORCESTER MASS L COES PAT'D MAY 15 1900 STEEL BAR 52. 8". #5. P.S.& w. CO CLEVELAND O. USA

  PiCs Choice Lot 88

CB089 (lot of 6 CoesWrenches) - #1. COES WRENCH CO WORCESTER MASS USA 18" (58). #2. Coes front unreadable MFG UNDER COES PATS STEEL 12" (58). #3. COES WRENCH CO WORCESTER MASS USA MFD UNDER L COES PATS STEEL 10" (58). #4. COES WRENCH CO WORCESTER MASS USA MFD UNDER L COES PATS STEEL 8 1/2" (58). #5. COES WRENCH CO WORCESTER MASS USA MFD UNDER L COES PATS STEEL 6 3/8" (58). #6. COES TRADE MARK BILLINGS MADE B USA 10 1/2" (66)

  PiCs Choice Lot 89

CB090 (lot of 3 Coes Wrenches) - #1. COES WRENCH CO WORCESTER MASS L COES PATD DEC 15. 1891 APR 30 1895 15" (50). #2. COES WRENCH CO WORCESTER MASS L COES PATD JULY 6 1880 JULY 8 1884 15" (45). #3. COES 15" BILLINGS MADE IN USA. on back ST&SFRR

  PiCs Choice Lot 90

CB091 (lot of 5 Adjustable Wrenches) - #1. PEXTO MADE IN USA 15. #2. PEXTO MADE IN USA 12". #3. PEXTO MADE IN USA 12. 12". #4. TRIMONT MFG CO TRIMP SIZE 12". #5. TRIMONT MFG CO TRIMO SIZE 10"

  PiCs Choice Lot 91

CB092 (lot of 4 Coes Wrenches) - #1. L COES & CO WORCESTER MASS L COES PATD MAY 4th 1869 12" (42). #2. COES WRENCH CO WORCESTER MASS L COES PATD JULY 6 1880 JULY 8 1884 12" (45). #3. COES WRENCH CO SPRINGFIELD MASS USA 12" (63). #4. COES WRENCH CO WORCESTER MASS USA MFD UNDER L COES PATS STEEL 12" (58)

  PiCs Choice Lot 92

CB093 (lot of 5 Coes. Etc. Wrenches) - #1. W&B in diamond MADE IN USA JH WILLIAMS CO 10". #2. COES WRENCH CO WORCESTER MASS L COES PATD DEC 15-1891 APR 30-1895 10" (50). #3. COES WRENCH CO WORCESTER MASS L COES patd JULY 6 1880. July 8 1884 10" (45). #4. COES WRENCH CO WORCESTER MASS USA MADE IN USA UNDER L COES PATS STEEL (53). #5. COES WRENCH CO WORCESTER MASS USA MFD UNDER L COES PATS STEEL 10" (58)

  PiCs Choice Lot 93

CB094 (lot of 4 Coes. Etc. Wrenches) - #1 COES WRENCH CO WORCESTER MASS Mfd Under L Coes Pats Steel 21" (58). #2. COES WRENCH CO WORCESTER MASS L COES PATD July 6 1880 July 8 1884 15" (45). #3. GIRARD WRENCH MFG GIRARD PA back GIRARD SPECIAL 17 1/8". #4. COES WRENCH CO WORCESTER MASS MADE IN USA UNDER L COES PAT 18" (53)

  PiCs Choice Lot 94

CB095 (lot of 5 Adjustable Wrenches) - #1. W&B CO MADE IN USA inside diamond 12". #2. GIRARD WRENCH GIRARD PA USA. #3. TRIMONT MFG CO TRIMONT SIZE 12" PATD 12-19-1911. #4. P.S.& W. CO IDEAL PAT JAN 24 05 MADE IN USA. #5. MOORE DROP FORGING CO Min circle SPRINGFIELD MASS USA 12".

  PiCs Choice Lot 95

CB096 (lot of 6 Adjustable Wrenches) - #1. Girard Wrench M'I G. CO Girard PA USA 8 1/2". #2. W&B CO MADE IN USA 8". #3. P.S. & W. CO's IDEAL PAT JAN 24 05 (on shaft) head PS& W in circle 8". #4. W&B MFG CO MADE IN USA (indent in shaft) 8". #5. W&B CO MADE IN USA WARRENTED 8". #6. P.S.&W.CO. SOLID BAR. PAT JAN 14 1896 MADE IN USA (on shaft) 8".

  PiCs Choice Lot 96

CB097 (lot of 7 Adjustable Wrenches) - #1. ORIGINAL PERFECT HANDLE TOOL 8 3/4". #2. COES WRENCH CO SPRINGFIELD MASS USA 8" (63). #3. COES WRENCH CO WORCESTER MASS 8" (50). #4. COES WRENCH CO WORCESTER MASS L COES PATD JULY 6. 1880 JULY 8. 1884 8" (45). #5. COES WRENCH CO WORCESTER MASS USA MFD UNDER L COES PATS STEEL 8 3/8" (58). #6. PEXTO MADE IN USA on head and on shaft USA. #7. P.S.& W. CLEVELAND O USA

  PiCs Choice Lot 97

CB098 (lot of 7 Adjustable Wrenches) - #1. L COES & CO WORCESTER MASS L COES & CO PATD Mar 23. 1869 6 1/2" (27). #2. COES WRENCH CO WORCESTER MASS USA MFD UNDER L COES PATS STEEL 6 1/2" (58). #3. MOORE DROP FORGING CO SPRINGFIELD MASS USA 6 1/2". #4. PS&W SOLID BAR PAT JAN 14 1936 MADE IN USA 6 1/2". #5. RICHARDS & CONOVER HDW CO RICH-CON (in circle on head 6 1/2". #6. W&B in diamond. MADE IN USA JH WILLIAMS & CO. #7. W&B in diamond MADE IN USA

  PiCs Choice Lot 98

CB099 (lot of 7 Pliers Type) - #1. Ramco Cotter Pliers ST Louis Mo Made in USA Pat Appld For. #2. Detroit UST CO Pat Appld For. #3. Aircraft Tools INC L.A. Calif USA PAT Np D 178041 AT508K. #4. BoheR USA. #5. Seymour Smith & Son Inc. Oakville Conn. USA # 118/Seymour Smith Co Ladies SNAP-CUT USA Pat 1.831.606. #6. W Haven Conn 5-6 Pat Dec 21-1915. #7. Unknown

  PiCs Choice Lot 99

CB100 (lot of 4 Pliers Type) - #1. WESTON. #2. Chicago Rivet & S-Co /Pat 7-14-22. #3. MORRILL NEW YORK RES US Pat Off / APEX Trade Mark Reg US Pat Off. #4. Unmarked pliers

  PiCs Choice Lot 100

CB101 (lot of 6 Pliers Type) - #1 Quincy. ILL. #2. Lock Line T.M. reg. ROSS MFG CO S.F. Made in USA US Patent No ? 2370 308. #3. EAGLE CLAW WRENCH CO ILL USA PAT 8-12. #4. K-D MFG CO Lancaster PA MADE IN USA / NO> 420 spanner Pliers Tempered steel Pat Apld For. #5. W. SchollHorn Co New Haven Conn. #6. T1 T2 on handles

  PiCs Choice Lot 101

CB102 (lot of 5) - #1. Pats Feb 12 1884 Pats Feb 24 1885. #2. Utica 750-8 Utica NY USA . #3. Unknown pliers. #4. Unknown pliers. #5. Unknown pliers. #6. Unknown pliers. #7. Unknown pliers

  PiCs Choice Lot 102

CB103 (lot of 5 Pliers Type) - #1. BLEDSOE Trade Mark Minneapolis / PAT PENDING. #2. Forged Steel Pat Pending. #3. KEN TOOL 6-34 USA. #4. HASCO both handles at top. #5. BRIEGEL METHOD TOOL CAT NO 607 PATENTED

  PiCs Choice Lot 103

CB104 (lot of 9 Pliers Type) - #1. M. Schollhorn Co New Haven Conn / Bernards. #2. LINKFIX. #3. K.R. Wilson. #4. GOOCH. #5. TH??N Emeryville. Calof P 300. #6. T&B TY-RAP WT 186F PATD. #7. LODI Pat Sep 26 1894 Re Nov 16 1900. #8. Wm Chollmorn Co New Haven CT LODI. #9. No markings

  PiCs Choice Lot 104

CB105 (lot of 5 Pliers Type) - #1. Herbrand-no 188 Made IN USA. #2. J Casper PAT May 6 13 / Lancaster Wis. #3. Unknown. #4. Unknown valve lifter. #5. SCHOLLHORN CO NEW HAVEN CONN

  PiCs Choice Lot 105

CB106 (lot of 5 Pliers Type) - #1. Pat Jan pitted. #2. Unknown with some pitting. #3. Unknown. #4. Unknown. #5. unknown

  PiCs Choice Lot 106

CB107 (lot of 7 Pliers Type) - #1. Made IN USA pliers. #2. Unknown pitted. #3. Not marked. #4. MADE IN USA . #5. Hose clamp pliers JAPAN. #6. VAR 8412. #7. Not marked

  PiCs Choice Lot 107

CB108 (lot of 6 Pliers Type) - #1. AL-WUZON EAR TAG PLIERS Mfgd By Inter Min Machine & Stamp Works INC Salt Lake City Utah USA. #2. P.S. Burch & Co Chicago ILL. pliers. #3. US marked pliers. #4. Unmarked pliers. #5. Forged Steel pliers. #6. ST. PIERRE Worchester Mass USA pliers

  PiCs Choice Lot 108

CB109 (lot of 7 Pliers Type) - #1. Unmarked pliers. #2. Unmarked pliers with spring holding open. #3. SEURGH & Co CHICAGO ILL with spring holding open. #4. Unmarked pliers. #5. Unmarked pliers. #6. -201. #7. ACIER Germany pliers.

  PiCs Choice Lot 109

CB110 (lot of 4 Pliers Type) - #1. W Schollhorn Co New Haven Conn made in USA Bernard H L Judd Co new York. #2. W Schollharn Co New Haven Conn? Bernards-PATENT PENDING. #3. KHU-VISE P-1200 pliers. #4. Commutator Dresser Co S/Camore. Illlinois EZ Wire Stripper Pat 1730980 2179581 Other Pending Made In United States Of America

  PiCs Choice Lot 110

CB111 (lot of 6) - #1. B 573 wrench IHC and American Seeding. #2. PEORIA D 1003 wrench. #3. Roderick Lean C 111 pitted. #4. Briggs & Stratton wrench. #5. Badger Cultivator H wrench pitted. #6. ARNHOLT wrench like (H911)

  PiCs Choice Lot 111

CB112 (lot of 5) - #1. Moline Plow Co MPCo stamped steel wrench 11" long . #2. Appleton C 619 wrench. #3. Madison Plow G 70 wrench pitted. #4. De Laval 27087 wrench. #5. De Laval 15893 wrench

  PiCs Choice Lot 112

CB113 (lot of 5) - #1. EMAERSON. #2. WOOD on both sides. pitted. #3. Grand Detour Plow W 1795 with a crack. #4. W 7 Blizzard Mfg. #5. 918 DeLaval.

  PiCs Choice Lot 113

CB114 (lot of 5) - #1. 172 Adams Grader. #2. 172 Adams Grader different variation. #3. 178 Adams Grader pitted. #4. 3050A Adriance pitman. #5. D 561 Peoria Drill.

  PiCs Choice Lot 114

CB115 (lot of 9 Hog Ring Pliers) - #1. HUMANE hog ring pliers. #2. STEWART HOG RING CO. #3. DE NEUL. #4. ? HILLS HOG RINGER /PAT AUG 27 1872. #5. HILLS HOG RINGER / PAR AUG 1872 (different with #4). #6. HILLS HOG RINGER . PAT APR 18 1865 & AUG 27 1872. #7. PLYR GRIP . 8 PERFECT (inside handle with 10 on one and 11 on the other). #9. PERFECT (inside handle 10 on one and 11 on the other but different than one above)

  PiCs Choice Lot 115

CB116 (lot of 7 Hog Ring Pliers) - #1. DE NEUI PAT 1931576 (marked inside handle on flat. #2. DE NEUI PAT 1931576 (marked in grove inside handleand pattern outside) #3. PLYR GRIP. #4. Handles embossed 35 & 36. #5. Unknown 5 1/2" long. #6. Unknown and has set screw 6 3/4" long. #7. Unknown and has set screw 6 3/4" long

  PiCs Choice Lot 116

CB117 (lot of 7 Pliers Type) - #1. EAGLE CLAW WRENCH ROCKFORD ILL USA PAT FEB 6-12 MT CO 7". #2. EAGLE CLAW WRENCH ROCKFORD ILL USA NO 302 MT CO Pat Feb 6-12 DASCO 10". #3. PROTO 236 LOS ANGLES MFD USA 6 1/4". #4. Unknown 7 1/2". #5. Unknown 10 1/2". #6. BLEDSOE TRADE MARK MINNEAPOLIS / PAT PENDING. #7. FORGED STEEL MADE IN USA.

  PiCs Choice Lot 117

CB118 (lot of 5 Railroad Wrenches) - #1. C&NW RY Chicago& North Western. #2. NPR Northern Pacific Railroad. #3. AT&ST FE RR (Williams). #4. Mo PRY Missouri Pacific. #5. CM & St P

  PiCs Choice Lot 118

CB119 (lot of 5 Railroad Wrenches) - #1. CBQ Chicago Burlington & Quincy. #2. AT & SF RY Atchison Topeka & Santa Fe (W&B). #3. B&O H in shield. 4 CRI & PRY. #5. AT & SF COLD CHISEL 3/4 x 7 5/8".

  PiCs Choice Lot 119

CB120 (lot of 3 Railroad Wrenches) - #1. CB& Q Chicago Burlington & Quincy 15" MW with a crack. #2. NYCRR New York Central 12" MW #3. CB&Q RR Chicago Burlington & Quincy 15" MW

  PiCs Choice Lot 120

CB121 (lot of 4 Railroad Wrenches. Hammer) - #1. B&O RR Baltimore & Ohio (Williams 20 1/4" long). #2. Mo PRY Missouri Pacific 21 1/4" long. #3. CRI & PRY Chicago Rock Island & Pacific JH Williams & Co emb on shank 22 1/4" long. #4. CRI & PRR both sides. Chicago Rock Island & Pacific BALL PEIN HAMMER HEAD

  PiCs Choice Lot 121

CB122 (lot of 4 Railroad Wrenches) - #1. MOP Missouri Pacific 16 1/2" long. #2. CRI & P TOOL ROOM stamped over CRI & P W&B 24 1/8" long. #3. ?HADAOH RY?? 10" long. #4. CRI & P hard to read 16" long.

  PiCs Choice Lot 122

CB123 (lot of 5 Railroad Wrenches) - #1. CB& Q Chicago Burlington & Quincy alligator wrench 17 3/4" long. #2. CRI & PRY JH WILLIAMS & CO BROOKYN-BUFFALO USA 12" long. #3. ERIE single OE 25" long. #4. AT & SF Atchison Topeka & Santa Fe 12" long. #5. CB& Q RR Chicago Burlington & Quincy 17" long

  PiCs Choice Lot 123

CB124 (lot of 6 Railraod Wrenches) - #1. B & MRR Bemis & Call 15 1/4" long. #2. CRI & PRY Chicago Rock Island & Pacific W&B 10". #3. CRI & PRY CRI Y PRY Chicago Rock Island & Pacific W&B 18" long. #4. NYNH & HRR Co New York New Haven & Hartford 8" long. #5. Railroad Special W&B 8 1/4" long name unreadable. #6. No mark unknown 10" long

  PiCs Choice Lot 124

CB125 (lot of 2 Deere Grease Guns) - #1. JOHN DEERE TY 15410 MADE IN USA grease gun. #2. JOHN DEERE TY 15381 grease gun.

  PiCs Choice Lot 125

CB126 (lot of 6 Pliers Types) - #1. WILLIAMS 1521 10 1/2" pliers. #2. SAMSON USA cutter pliers. #3. WHITAKER (hard to read) logo CHICAGO 10 " pliers. #4. REVU (rest unreadable) 10" pliers. #5. S??? Tools 6 1/2" pliers. #6. 1050 GUARANTEED 8" PLIERS

  PiCs Choice Lot 126

CB127 (lot of 6 Pliers Type) - #1. OXWALL TOOL GERMANY 6 1/2" pliers. #2. TOWNLEY QUALITY UNEXCELLED 8" pliers. #3. PEXTO 40-8 8" pliers. #4. BOKER & CO MADE IN USA 7 1/2" pliers. #5. UTICA P-226 UTICA NY USA BELL SYSTEM 6 1/2" needle nose pliers. #6. MEPHISTO No 98 6 1/2" needle nose pliers.

  PiCs Choice Lot 127

CB128 (lot of 5 Auto Type Adjustable Wrenches) - #1. VLCHEK LOGO 14 IN AUTO top of shank & end of shank. twice. #2. WAKEFOELD NO 19 WORCHESTER MASS USA PAT'DNOV 14. 1922. #3. FAIRMOUNT CLEVE USA 11". #4. LAKESIDE in logo on head 9". #5. FRANK MOSSBERG initials over rest. DIAMOND No 11. 5 1/2" long

  PiCs Choice Lot 128

CB129 (lot of 6 Auto Type Adjustable Wrenches) - #1. CRESENT TOOL CO AUTO 9". #2. WIZARD No 9 (rest is hard to read). #3. CRAFTSMAN / made In USA No 4449-11. #4. MOORE DROP FORGING CO SPFLD MASS 9". #5. FAIRMOUNT CLEVE 9". #6. CRESENT TOOL CO JAMES TOWN NY USA/ 11 in AUTO FORGED STEEL

  PiCs Choice Lot 129

CB130 (lot of 5 Adjustable Wrenches) - #1. FAIRMOUNT CLEVE MADE IN USA 15" IN. #2. WALWORTH MADE IN USA / GENUINE STILLSON pipe wrench 8" long. #3. TRIMONT MFG CO ROXBURY MASS USA / SIZE 8" PATD12-19-1911. #4. TRIMONT MFG CO ROXBURY MASS USA / SIZE 10" PATD 12-19-1911. #5. TRIMONT MFG CO ROXBURY MASS USA SIZE 12 " PATD 12-19-1911

  PiCs Choice Lot 130

CB131 (lot of 5 Adjustable Wrenches) - #1. PROTO 810 10". #2. TRIMONT MFG ROXBURY MASS USA 14 TRIMONT ALLOY PATD 14". #3. TRIMONT MFG CO ROXBURY MASS USA 8". #4. TIGER TOOLS 8". #5. TIGER G/S TOOLS 14".

  PiCs Choice Lot 131

CB132 (lot of 6 Pipe Wrenches) - #1. WALWORTH MFG CO BOSTON USA/ REGISTERED STILLSON TRADE MARK 10". #2. CHAMPION DEARMENT MEADVILLE PA USA anvil logo 10". #3. JP DANIELSON CO STILLSON PATTERN MESTOWN NY USA 10". #4. WALWORTH MFG CO BOSTON USA / REGISTERED STILLSON TRADE MARK 10". #5. WLAWORTH MFG CO BOSTON USA / REGISTERED STILLSON TRADE MARK 8". #6. WEST GERMANY / GUARANTEED 8"

  PiCs Choice Lot 132

CB133 (lot of 5 Pipe Wrenches) - #1. DUNLAP / DROP FORGED-STEEL GERMANY 18". #2. JR STILLSON CO JAMESTOWN NY (hard to read) 18". #3. TRIMONT MFG CO / TRIMO ALLOY PATD TRIMO SIZE 8". #4. GTD CORP'N / GREENFIELD MASS MADE IN USA G T D on head 10". #5. MERIT STILLSON WRENCH 10"

  PiCs Choice Lot 133

CB134 (lot of 5 Pipe Wrenches) - #1. TORBIN MADE IN USA / PLANTSVILLE CONN 14". #2. LARCO WRENCH & MFG CORP CHICAGO USA / trade LARCO mark DROP FORGED PAT PEND 14". #3. WALWORTH MADE IN USA / GENUINE STILLSON 10". #4. FW WELLS & SON 10 / GREENFIELD MASS USA 10". #5. WALWORTH MFG CO BOSTON USA / REGISTERED STILLSON TRADE MARK 8"

  PiCs Choice Lot 134

CB135 (lot of 6 Buggy Wrenches) - #1. E in circle 7320 C / PATD. #2. E in circle 7320 D / PATD. #3. E in circle 2320 E. #4. E in circle7306 C. #5. E in circle 7315 C. #6. E in circle 7325 C

  PiCs Choice Lot 135

CB136 (lot of 6 Pipe Wrenches) - #1. MOORE DROP FORGING CO STILLSON'S WRENCH MADE BY SPRINGFIELD MASS USA / MORCO 10". #2. WALWORTH MFG BOSTON USA / REGISTERED STILLSON TRADE MARK 8 ". #3. WALWORTH MFG CO BOSTON USA / REGISTERED STILLSON TRADE MARK 10". #4. MOORE DROP FORGING CO STILLSON'S WRENCH MADE BY SPRINGFIELD MASS USA 8". #5. MERIT / STILLSON 10". #6. STILLSON in diamond. TRADE MARK. on shaft and movable jaw 10".

  PiCs Choice Lot 136

CB137 (lot of 6 Pipe Wrenches) - #1. TRIMONT MFG CO ROXBURY MASS some un readable on body/ TRIMO 8". #2. TRIMONT MFG CO ROXBURY MASS on shaft back side. TRIMO 8. large 8". #3. TRIMONT MFG CO ROXBURY MASS on body TRIMO 10/ DROP SIZE 10 FORGED on shaft. #4. PEXTO logO MADE IN USA 10". #5. PEXTO logo MADE IN USA 8". #6. PEXTO logo MADE IN USA indented shaft read vertically next to handle 10"

  PiCs Choice Lot 137

CB138 (lot of 6 Buggy Wrenches) - #1. E in circle 7320 C / PATD. #2. E in circle 7320 D / PATD. #3. E in circle 2320 E. #4. E in circle7306 C. #5. E in circle 7315 C. #6. E in circle 7325 C

  PiCs Choice Lot 138

CB139 (lot of 6 Buggy Wrenches) - #1. E in circle 2315 B / PATD. #2. E in circle 2310 B / PATD. #3. E in circle 2320 C / PATD. #4. E in circle 2320 D / PATD. #5. E in circle 7307 B. #6. E in circle 7307 D / D

  PiCs Choice Lot 139

CB140 (lot of 5 Buggy Wrenches) - #1. 1098 impressed front head / D boxk of head. #2. 2819 C Impressed back of shank 1 on head . front diamond on head. #3. Large head maybe 1013. #4. Differnent marking. #5. 1 with small 10 on head. 9 1/4" long pitted bad

  PiCs Choice Lot 140

CB141 (lot of 5 Buggy Wrenches) - #1. No marks 1 3/16". 10 1/2" long. #2. No marks 1 7/16". 10 3/4" long. #3. 7320 E ?? Marked on head 1 1/4". 9 1/8" long. #4. 7320 C. #5. No marks readable 9 1/4" long

  PiCs Choice Lot 141

CB142 (lot of 6 Buggy Wrenches) - #1. 2320 B on head. on back PATD. #2. 2320 D on head . on back PATD. #3. 2315 D. #4. 2325 B ? Not very plain. #5. No marks 7 7/8" long. #6. No marks 9" long

  PiCs Choice Lot 142

CB143 (lot of 5 Buggy Wrenches) - #1. SF 9 ? Hard to read. #2. Unknown. #3. Unknown. #4. Unknown. #5. Unknown. #6. Unknown

  PiCs Choice Lot 143

CB144 (lot of 6 Alligator Wrenches) - #1. W&B in diamond and on back no 1 1/2 BULL DOG. #2. AMERICAN SAW CO TRENTON nj ALLIGATOR. #3. VAUGHAN & BUSHNELL MFG Co No 1 part unreadable. 5 1/2". #4. VAUGHAN & BUSHNELL MFG Co No 1 5". #5. Large 1 only 4" . #6. VAUGHAN & BUSHNELL MFG CO TWIN 10". #7. 0 only 3 7/8" long

  PiCs Choice Lot 144

CB145 (lot of 7 Crescent Type Wrenches) - #1. PECK STOW & WILCOX CO USA / 8in ANGLE ADJUSTABLE PEXTO. #2. P&C 1712-SL FORGED ALLOY STEEL 12 in / CLIKSTOP pat no 2.905.037 MFD USA 12 ". #3. McKAIG-HATCH INC BUFFALO NY USA 6 in / 6 in MODEL K DROP FORGED STEEL #4. No marks with flat handle 4 1/2". #5. LAKESIDE DROP-FORGED TOO-STEEL 6/6 MADE IN USA LAKESIDE. #6. KEYSTONE MFG CO BUFFALO NY USA 6 in/6 in MODEL K DROP FORGED STEEL. #7. THORSEN 12" 300 mm 56732 / EURO-STYLE WIDE GRIP

  PiCs Choice Lot 145

CB146 (lot of 8 Crescent Type wrenches) - #1. TAPARIA 1170 6 / DROP FORGED 167 INDIA 6". #2. SEARS CHROME ALLOY STEEL 8" / FULL DROP FORGED JAPAN. #3. THORSEN ALLIED AW -8AL / FORGED ALLOY STEEL 8" SPAIN. #4. SERVESS 8" KOREA / 8" DROP FORGED. #5. STS ANGLE WRENCH 1/2 x 8 in / NO A-1 PARTIAL FORGED JAPAN . #6. ZUBI-ONDO Np 101-6 / No 101-6 ZUBI-ONDO MADE IN SPAIN 6". #7. GREAT NECK NO AW 6 ALLOY DROP FORGED 6" SPAIN .#8. JOB HELPER 8" TAIWAN / DROP FORGED MOVABLE JAW (F)

  PiCs Choice Lot 146

CB147 (lot of 3 Moline Wrenches) - #1. RD 2108 Moline Plow. #2. V 4194 Moline Plow. #3. Minneapolis Moline socket wrench 1 3/4" x 25 1/2" long

  PiCs Choice Lot 147

CB148 (lot of 6 Bell System Wrenches. Etc.) - #1. BELL SYSTEM S (marked only) 13" long. #2. BELL SYSTEM L/M KLEIN & SONS 13 7/8" long. #3. M KLEIN & SONS / CAT 3146 A BELL STSTEM B 4-68. 13" long. #4. M K;EIN & SONS / CAT 3 1 4 6 A 2-78 BELL STSTEM B 13" long. #5. BELL SYSTEM C !!/16 & 1 3/16. other end 1 1/8. Armstrong logo 10" long. #6. BELL SYSTEM UTICA logo knife w/small hammer 7 1/2" long

  PiCs Choice Lot 148

CB149 (lot of 7) - #1. B 14 unknown solid handle 6" long. #2. B 14 unknown. 6 sq. holes 6 3/16 " long. #3. M 23 unknown green paint 6 1/8" long. #4. 3 unknown 6" long. #5. C&D PH-802 double box end 5 1/2" long. #6. Not readable 6 1/4" long. #7. Brown Manly 1 AA. #8. Empire Plow 10. 6 1/8" long

  PiCs Choice Lot 149

CB150 (lot of 7 Ward Wrenches) - #1. WARDS MASTER QUALITY 1 1/16 & 1 1/8 / CHROME ALLOY MADE IN USA. #2. WARDS MASTER QUALITY 15/16 & 1"/ CHROME ALLOY MADE IN USA. #3. WARDS MASTER QUALITY 3/4 & 7/8 / CHROME ALLOY MADE IN USA. #4. WARDS MASTER QUALITY 19/32 & 11/16 / CHROME ALLOY MADE IN USA . #5. WARDS MASTER QUALITY / MOLYBDENUM ALLOY USA (marked in insert) 15/16 & 1" on head. #6. WARDS MASTER QUALITY 3/8 & 7/16 / CHROME ALLOY MADE IN USA . #7. WARDS MASTER QUALITY 5/8 comb. CHROME ALLOY MADE IN USA

  PiCs Choice Lot 150

CB151 (lot of 9 Wards Wrenches) - #1. WARDS MASTER QUALITY 3/4 & 7/8 / CHROME ALLOY MADE IN USA. #2. WARDS MASTER QUALITY 1/2 & 9/16 / CHROME ALLOY MADE IN USA . #3. WARDS MASTER 19/32 & 11/16 (in dent) / FORGED IN USA . #4. WARDS 3/8 & 7/16 / DRP FORGED TOOL STEEL JAPAN . #5. WARDS 3/4 & 25/32 / DROP FORGED TOOL STEEL JAPAN. #6. WARDS 13/16 & 7/8 / DROP FORGED STEEL JAPAN . #7. WARDS MASTER 1#3. 16 & 25/32 (in indent) FORGED IN USA. #8. WARDS MASTER 5/8 & 9/16 (in indent) / CHROME VANADIUM STEEL. #9. WARDS MASTER 1/2 & 7/16 (in indent) CHROME VANADIUM STEEL

  PiCs Choice Lot 151

CB152 (lot of 5 Blackhawk Wrenches) - #1. BLACKHAWK 4219 X 9/16 & 9/16 & MADE IN USA. #2. BLACKHAWK 520 Made in USA 5/8. #3. BLACKHAWK 4116 Made in USA 1/2. #4. Valve wrench. #5. WARDEN WORCHESTER 11/16 3822.

  PiCs Choice Lot 152

CB153 (lot of 4 Blackhawk Wrenches) - #1. BLACKHAWK 4424 9/16 MADE IN USA 5/8. #2. BLACKHAWK 4330 11/16 MADEIN USA 15/16. #3. BLACK HAWK 4218 9/16 MADE IN USA #4. BLACK HAWK 1118

  PiCs Choice Lot 153

CB154 (lot of 5) - #1. RIVERSIDE / 15/16 CHROME VANADIUM STEEL 1". #2. RIVERSIDE 7/8 CHROME VANADIUM STEEL 13/16. #3. RIVERSIDE 11/16 CHROME VANADIUM STEEL 5/8. #4. RIVERSIDE 9/16 / CHROME VANADIUM STEEL. #5. 206 ORPHAN 4 1/8" LONG

  PiCs Choice Lot 154

CB155 (lot of 5) - #1. EC Tecktonius Mfg Co 5/8 & 3/4 Racine Wis S 12. #2. STADCO No 21 MALL IRON. #3. Tower JD & Sons O. #4. Fordson M in circle 2372 . #5. Superior Drill 397

  PiCs Choice Lot 155

CB156 (lot of 5) - #1. Sterling Mfg D 127. #2. Wester Land Roller 749. #3. Stoddard Mfg H 260. #4. Stoddard Mfg P 17. #5. Stoddard Mfg NE 258.

  PiCs Choice Lot 156

CB157 (lot of 5) - #1. Twin City Tank & Silo Co 5/8 Minneapolis Minn. #2. Western Land Roller ZA- 13/16.#3. VB & TB CO Easton Pa 1/2 For Petrol Fastener. #4. Universal Harvester Co West Memphis Arkansas Stockton California. #5. Wallis tractor 1836 (pitted

  PiCs Choice Lot 157

CB158 (lot of 4) - #1. Red Jacket Pump Co P 45. #2. South Bend Chilled Plow SB. #3. Case 0270 T. #4. Stover Mfg 2091 (badly pitted)

  PiCs Choice Lot 158

CB159 (lot of 5) - #1. 102 F with IHC logo. #2. 509 ihc pitted. #3. A.M.C.o possible Aultman Miller. #4. L 634. #5. C 5" long

  PiCs Choice Lot 159

CB160 (lot of 5) - #1. South Bend Chilled Plow 15 3/4" long with no mark. #2. Adriance Platt & Co 768 A. #3. Stearns EC 5074. #4. Stearns EC 1 1/4 open end. #5. Stearns EC 9/16.

  PiCs Choice Lot 160

CB161 (lot of 5 Warden Worchester) - #1. WARDEN WORCHESTER 2720. #2. WARDEN WORCHESTER 3822. #3. WARDEN WORCHESTER 3620. #4. WARDEN WORCHESTER 2418. #5. WARDEN WORCHESTER 2718

  PiCs Choice Lot 161

CB162 (lot of 4 Acme) - #1. Acme S 852. #2. Acme A 882. #3. Acme A 881. #4. Acme A 883.

  PiCs Choice Lot 162

CB163 (lot of 5) - #1. ACME 7 1/2" long. #2. Acme M 189pitman wrench. #3. Advance Rumley 170 J. #4. Advance Rumley 169 J. #5. Advance Rumley 214 A

  PiCs Choice Lot 163

CB164 (lot of 4) - #1. Allis Chalmers TC 369 B in diamond. #2. Allis Chalmers TC 369 B in large D before number. #3. Allis Chalmers TC 369. #4. VULCAN PLOW CO / EVANSVILLE IND

  PiCs Choice Lot 164

CB165 (lot of 4) - #1. Samson 1892 for Wrist Pin Only 8 on head. #2. G1 Oliver or IHC (pitted). #3. PP CO . #4. WT P-8201 10 1/4" long

  PiCs Choice Lot 165

CB166 (lot of 8 Cream Separator Wrenches) - #1. DeLaval 15893. #2. DeLaval 09385. #3. DELAVAL 4126. #4. DeLaval with 2 notches. #5. DELAVAL 313. #6. ECONOMY KING. #7. ECONOMY CHIEF. #8. Not marked

  PiCs Choice Lot 166

CB167 (lot of 5 Case Threshing Machine Wreenches) - #1. Case eagle 5994 T. #2. Case MADE IN USA 01982 AB steel. #3. CASE 029 W steel. #4. CASE 031 W steel. #5. CASE 028 W steel.

  PiCs Choice Lot 167

CB168 (lot of 5 Auto Type Adjustable Wrenches) - #1. Waldren Worchester 2720 hard to read. #2. Walden Worchester 3620. #3. Waldon Worchester 2418. #4. (2) Waldren Worchester 3822. #5. Blackhawk 4230.

  PiCs Choice Lot 168

CB169 (lot of 4) - #1. DROP FORGED MADE IN USA 11". #2. THE BULLINGS & SPENCER CO HARTFORD CONN USA. #3. GM CO L I CITY NY on the back made in usa unbreakable. #4. LECTROLITE 8"

  PiCs Choice Lot 169

CB170 (lot of 5) - #1. Western Land Roller 13/16 2A623. #2. ROCK ISLAND R1123. #3. Empire Plow 7370. #4. Massey Harris M-H stamped steel 6 5/8" long. #5. PLANET JR 3.

  PiCs Choice Lot 170

CB171 (lot of 4) - #1. IHCO G 3170 (48). #2. IHCO G 3170 F (44). #3. JD-52. #4. D&M Deere.

  PiCs Choice Lot 171

CB172 (lot of 4) - #1. P&O CO . #2. M-H Z 435 stamped steel. #3. 1893. small wrench. #4. Unmarked wrench.

  PiCs Choice Lot 172

CB173 (lot of 5) - #1. MECHANICS TOO CO EAGLE CLAW WRENCH PAT FEB 6 19--. #2. Eagle Claw 10" long. #3. Pliers 7 1/4" long.#4. 1/8 marked pliers

  PiCs Choice Lot 173

CB174 (lot of 6) - #1. P&O CANTON ILL 4129. #2. EMERSON. #3. P.P.Co. Pattee Plow. #4. SB South Bend plow Co. #5. DEERING 3/16" letters. #6. M 58 Caldwell lawn mower

  PiCs Choice Lot 174

CB175 (lot of 7) - #1. W 6 Blizzard Mfg. #2. W 7 Blizzard Mfg. #3. ARNHOLT pitted. #4. 4S Sandwich Mfg. #5. 260 ihc not marked. #6. 2091 Stover Mfg. #7. New Departure Bicycle

  PiCs Choice Lot 175

CB176 (lot of 6) - #1. CHAIN BELT CO 5/8 MILWAUKEE WIS. #2. B&G PLOW CO CANTON O. #3. CHASE PLOW CO. #4. CHERRY-BURRELL CORPN. #5. CHAIN BELT C 7 16". #6. BUFORD C 1.

  PiCs Choice Lot 176

CB177 (lot of 5 Crescent Type Wrenches) - #1. CHANNEL LOCK 12". #2. HERBRAND No 21-12. #3. PEXTO 8". #4. HARROLDS 8". #5. CRESTOLOY 4"

  PiCs Choice Lot 177

CB178 (lot of 6 Crescent Type Wrenches) - #1. BET'R GRIP 8". #2. DA-8 OWATONNA . #3. NEW BRITIAN AW-8. #4. LECTROLITE 8". #5. TIGER C-17. 8". #6. DIAMALLOY 8"

  PiCs Choice Lot 178

CB179 (lot of 7 Crescent Type Wrenches) - #1. UTICA 91-12. #2. LAKESIDE 89-4700 10". #3. SCHILLER 8". #4. LAKESIDE 84-4700 8". #5. CANTON MALLEABLE IRON CO 8". #6. UTICA 8-16 8". #7. BILLINGS 77-8 8"

  PiCs Choice Lot 179

CB180 (lot of 7 Crescent Type Wrenches) - #1. CYGNET 8". 2 FULLER 8". #3. PENENS 8". #4. KEYSTONE 7". #5. JP DANIELSON CO BET'R-GRIP 6".#6. FULLER 6". #7. JP DANIELSON CO VANADIUM 6"

  PiCs Choice Lot 180

CB181 (lot of 7 Crescent Type Wrenches) - #1. JH WILLIAMS & CO 12". #2. PENENS CORP 4010-S Fleet 10". #3. HMC TOOLS 8". #4. STANLEU 8". #5. WILLIAMS ADJUSTABLE 8". #6. WARDS MASTER QUALITY 8". #7. SCHOLLER 6"

  PiCs Choice Lot 181

CB182 (lot of 8 Crescent Type Wrenches) - #1. B&C No 75 10". #2. ARTISAN 10". #3. B&C No 80 8". #4. ARROW 10". #5. AUTOMATIC TRANSMISSION CO 10". #6. BARCALO BUFFALO 8"

  PiCs Choice Lot 182

CB183 (lot of 9 Crescent Type Wrenches) - #1. B&C No 75 10". 2. A#2. rtisan 10". #3. b&c BO 80 8". #4. b&c 8". #5. UTICA 91-6 6". #6. WARD MASTER'A. #7. CANTON MALLEABLE IRON CO. 6". #8. TIGERALLOY 6". #9. DIAMALLOY 4"

  PiCs Choice Lot 183

CB184 (lot of 9 Crescent Type Wrenches) - #1. BONNEY BW-12 12". #2. BEST STANDARD USTRIA 8". #3. BEMIS & CALL 6". #4. FULTON A239 6". #5. BARCALO 8". #6. BARCALO Model -N6 6". ARTISAN 6". #8. CARILL 6". #9. ARMSTRONG 6 BL 6"

  PiCs Choice Lot 184

CB185 (lot of 4 Pipe Wrenches) - #1. HUDSON FORGE CO 10". #2. PARKER TOOL CO 10". #3. LAKESIDE 10". #4. MOORE DROP FORGING CO 10"

  PiCs Choice Lot 186

CB186 (lot of 5 Pipe Wrenches) - #1. HENRY & ALLEN 14". #2. PECK & MACK 8". #3. WELLS GTD 8". #4. HENRY & ALLEN 8". #5. GTD 6".

  PiCs Choice Lot 186

CB187 (lot of 5) - #1. TRIMO TRADE MARK FEB 1889. #2. OSWEGO TOOL CO . #3. TOBRIN MADE USA . #4. ATLAS TOOL CO

  PiCs Choice Lot 187

CB188 (lot of 5) - #1. MONTGOMERY WARD & CO name plate. #2. LAKESIDE 10". #3. WARDS LAKESIDE 13/16 x 7/8". #4. WARDS LAKESIDE 13/16 x 11/ 16. #5. WARDS LAKESIDE 1/2 x 9/16.

  PiCs Choice Lot 188

CB189 (lot of 6) - #1. Buford pitted. and not marked. #2. R 20. #3. Not marked. #4. Not marked. #5. 65-1. #6. 85 E Rawlings Garden Cultivator

  PiCs Choice Lot 189

CB190 (lot of 7) - #1. FAIRBANKS-MORSE&CO 11 1/2". #2. 41. #3. B Minneapolis Theshing machine. #4. 519. #5. 43 R Advance Rumley. #6. STANDARD. #7. 1AA Brown Manly Plow.

  PiCs Choice Lot 190

CB191 (lot of 6) - #1. 25 A Pratt. #2. Not marked Pratt. #3. 345 A Eberhard. #4. 7364 L Pratt. #5. 7364 marked on end impressed. #6. Unmarked like H 911

  PiCs Choice Lot 191

CB192 (lot of7) - #1. H 272 IHC Aultman Miller binder crank. #2. 1 A pitted clevis pin wrench. #3. X. #4. W&T P-8200. #5. Wheel socket 3 3/8 x 3 5/8. #6. Wheel socket 3 3/4. #7. Wheel socket 3 1/16

  PiCs Choice Lot 192

CB193 (lot of 6 Clevis) - #1. Heavy clevis. #2. 10 hole clevis. #3. 8 hole clevis. #4. Clevis and pin not marked. #5. 358 clevis and pin rusted and will not move. #6. Clevis and pin not marked.

  PiCs Choice Lot 193

CB194 (lot of 4 Clevis) - #1. W 84 clevis. #2. A 53 clevis. #3. M or W clevis. #4. Clevis not marked

  PiCs Choice Lot 194

CB195 (lot of 6 Pullers) - #1. Unmarked puller. #2. Unmarked puller. #3. 18 Puller. #4. A 1339 puller. 5 Puller. #6. W puller

  PiCs Choice Lot 195

CB196 (lot of 5) - #1. SINGER oil can. #2. SINGER oil can. #3. Unmarked copper oil can. #4. BROTHER oil can. #5. Unmarked oil can. #6. Umarked oil can. #7. Unmarked oil can. #8. Unmarked oil can

  PiCs Choice Lot 196

CB197 (lot of 8) - #1. Clover Co ACE SLIP & LOCK-NUT WRENCH . #2. WEED MFG. #3. A 1013 multi wrench. #4. HAWKEYE WRENCH CO .#5. HAWKEYE WRENCH CO CROCODILE. #6. LAKE SUPERIOR. #7. CRESENT screwdriver and hammer. #8. 10.

  PiCs Choice Lot 197

CB198 (lot of 7) - #1. E 1015. #2. D 1 Grand Detour. #3. 90. #4. 418 L Rude Bros. #5. 68 or 89. #6. No marked. #7. M_H steel 9".

  PiCs Choice Lot 198

CB199 (lot of 6) - #1. Massey Ferguson 510 combine cly. Wrench not marked #2. IHC 23966 D wheel wrench. #3. IHC MA 75811 cly. Wrench. #4. Case threshing machine wrench 0267T. #5. REED MFG CO No 20. #6. Eagle Claw 12 3/4"

  PiCs Choice Lot 199

CB200 (lot of 5) - #1. 2124020-2. #2. 66335 D IHC wheel wrench. #3. Possible JD. #4. Avery SS 628 Threshing machine wrench handle. #5. IHC 30011 DA drawbar wrench

  PiCs Choice Lot 200

CB201 (lot of 9) - #1. 6" SPEED WRENCH. #2. BOOS TOOL CORP 6 1/2". #3. V&B wrench pat date 1898. #4. BOOS TOOL CORP 6". #5. HERCULES 8". #6. HERCULES 6". #7. Adj. 6". #8. HERCULES 4 3/4". #9. ADJ. 3 3/4"

  PiCs Choice Lot 201

CB202 (lot of 6) - #1. Wood Bros 100. #2. W&B made in usa warrented 10". #3. 10" AG Coes. #4. Coes 6 1/2". #5. PS & W Co 6 3/4". #6. L Coes 6 1/2"

  PiCs Choice Lot 202

CB203 (lot of 7) - #1. E 13 Moline Plow. #2. D 203 Moline Plow. #3. 106 Moline Plow. #4. A 763 A Monitor Drill. #5. H 523 - IHC. #6. 256 no logo IHC. #7. RP 5413 Oliver steel not marked

  PiCs Choice Lot 203

CB204 (lot of 6 Buggy Wrenches) - #1. Dayton. #2. 2811 C. #3. 340. #4. 340 with W on back. #5. 554. #6.

  PiCs Choice Lot 204

CB205 (lot of 9 Buggy Wrenches) - #1. 2. #2. 450. #3. 510. #4. 526. #5. F 104. #6. F 103. #7. 635 C. #8. 468. #9. 46

  PiCs Choice Lot 205

End of cataloged lots. There may be additional unlisted lots








Don Ervin - Surry, Main



Dale Radiel - Sharon Springs, Kansas



Dale Radiel with his IHC Tool Board





An Article in the January 1928 Hardware Dealers Magazine Explains the Differnce in Marked and Actual Wrench Jaw Openings

  



That's All Folks an as


Back To The Wrenching News Homepage



Copyright 2024 by Don 'Bus' Haury
Webmaster - Don 'Bus' Haury Email: