2014 Fall Antique Wrench Auction - Eldorado, Kansas

Fencing Tools - Group One (lots 1 thru 23)

0001. COMB. WIRE FENCE ???RER (can't read all the markings) - - 8" Combination fence tool with a hammer, wire cutter, splicer, staple puller, etc. Patented Aug. 31, 1909 by Robert C. Johnson of Fort Benton, Montana. Good+ with some hammer dings on side over the markings. (Smith 50) PAT.

0002. BOWEN FENCE CO. / NORWALL, OHIO 2 - - 9" cast fence twister. Excellent. (Smith 698)

0003. SSP (in a shield logo) - CO-ORD. - PAT. 2082/557 - 52 with an arrow logo - - 13.5" folding handle saddle bag wire cutters. Patent not found. Excellent. (looks like Smith 113)

0004. PAT. MAY 8, 1883 - - 9.75". Combination hammer and staple puller. Patent was granted to Henry A. Gore of Goshen, Indian. Some pitting. (Smith No. 83) PAT.

0005. Marked only "275F" - - 17". Combination fence stretcher, wire cutter, etc. with ridge inside handle edge. Good++. (Smith 128)

0006. SC PAT. PEND. - - 6.5".wire griping tool. Patent not found. Excellent (Smith 118)

0007. FENCE TOOL - PAT. NO. 1,207,367 - F. A. BUSWELL - CHATTABOOGA, OKLA.(few weak markings) - -10" Combination hammer, staple puller, wire twister. Weld repair on handle? (Smith 712) PAT.

0008. SMITH DIST. CO. - HOUSTON, TEX. - 16 (with a "TF" logo) - - 9" fence stretcher and splicer. Excellent. (Smith 260)

0009. Marked only: PAT. APPL FOR - - 4.5" malleable cast combination saddle fencing tool with a hammer, fence tightener, nail claw. Similar but much older and rarer than the Atomic saddle fence tool. Patented by James Halstead Birch of Plattsburgh, Missouri on Oct. 2, 1888. Excellent. (Smith 724) PAT

0010. ATOMIC GLASKIN MFG - PAT PENDING - - 4.5" malleable cast combination saddle tool with hammer, fence tightener, nail claw, stable puller, etc. Patented Sept. 27, 1949 by James B. Glaskin of Colorado Springs, Colorado. Excellent. (Smith 723) PAT

0011. LITTLE QUEEN / PAT. PEND - - 8" combination fence stretcher, hammer, staple puller. Excellent. (Smith 231)

0012. PAT. APLD FOR - - 10.5" cast wire splicer with detachable handle. Patented June 1, 1909 by Herschel A. Schermerhorn of Shabbona, Illinois. Excellent. (Smith 161) PAT

0013. WA/10958 - W. T. (arrow logo) 45 - - 7.5" wire cutters. Excellent. (not in Smith's)

PiCs Lots 1 thru 13

0014. PAT. JUNE 11 - 82 - PAT JULY 5, 81 - JULY 13, 80 - JUNE 29, 1875 - - 15". Crank type fence stretcher with rope. Listed in Smith's as the "Little Giant Junior". Patents were issued to Reuben Ellwood and others of Sycamore, Illinois. Excellent. (S215) PAT. - PAT. - PAT. - PAT.

0015. Unmarked - - 14.5" large nipper with a hammer and wire stretcher claws on the side of the jaws. Older style with ball handle ends. Excellent. (S142)

0016. Unmarked - - 13.5". United States Cavalry picket fence stake pin with claw and hammer heads. Good++. Also see Lots 400-402.(Smith 207)

0017. THE COULTER TOOL CO. SAN ANTONIA, TEXAS / MADE BY STRIEBY & FOOTE CO. - NEWARK, NJ - PAT. SEPT. 19, 1904 - - 18" comb. plier type tool with pliers, wire cutter, wire twister, wire stretcher, etc. Patented by Newton J. Tate of Weatherford, Texas. Good++ with the often missing S-hook and leather punch. (Smith 134) PAT.

0018. QUIK-GRIP WIRE STRETCHER - 100 - PAT. PENDING / GROSCO INC. DES MOINES IOWA - - 21.5" Good++. (Smith 377)

0019. US / US - - 8" pliers and wire cutter. US military? Good++.

0020. MOUNT - - 6.5" specialty pliers. Fence tool or corn check row planter pliers? Excellent.

0021. OVERLAND FISHERMEN'S FRIEND -SOLINGEN GERMANY - NO. 280 - - 4.5" quality made Bernard type parallel jaw pliers and wire cutters. Plated in absolutely like new condition.

0022. WM. HJORTH & CO. - JAMESTOWN N.Y. - PAT SEP. 8, 1903 (few weak markings) - - 7". Small size combination plier wrench tool with a wire cutter, screwdriver, and tack puller. Patented by Arthur W. Hjorth of Jamestown, NY. Excellent with plated finish. (like Smith No. 75, not in Schulz, C168) PAT.

0023. Marked only "W1" (Kitselman)- - 9.5" combination fencing tool with hammer, staple puller and twisting jaws. Good++ (Smith 84)

PiCs Lots 14 thru 23

Farm Equipment Type Wrenches - Group One (lots 25 thru 48)

0024. D138 (Chattanooga Plow Co. / IHC / David Bradley) - - 12.75". Disk straightening slot at 90° Good+, not cleaned. (R1-99, R1-252)

0025. Lot of two:
(1.) 7B8975 (Caterpillar) with a "M" in a shield logo - - 11.75" square box with scraper blade. Good+. (R3-43)
(2.) 6F3703 (Caterpillar) with horizontal "T" logo - - 8.5" double male hex drain plug wrench. Excellent. (R3-43)

0026. JOHN DEERE / MADE IN USA - -11.75" double hex box ends. Scarcer version of this wrench with the Made in USA imprint. Excellent. (D246)

0027. Z2 SYRACUSE (Syracuse Chilled Plow Co. / Deere) - - 10.5". Two hammer heads, small end up variation. Jaw crack. (D553)

0028. Lot of two:
(1.) MORRISON 260 (Morrison Mfg. Co. - Fort Dodge, Iowa) - - 10". Pitting. (R1-340)
(2.) H & D YORK PA (Hench & Dromgold - York, Penn.) - - 7.25" with small hammer head. Good+. (R1-228)

0029. A108 (Stoddard Mfg. Co. - Dayton, Ohio) - - 3.25" x 5.25". tee handled socket wrench with two square openings. Rare wrench, first I have seen. Listed in Rathbone but no photo. Some light pitting

0030. NEWELL SANDERS PLOW CO / A163 (later IHC) - - 8.5" with hammer head. Good. (R1-351)

0031. GA246 (IHC) - - 910" piston socket wrench. No IHC logo variant. Good++. (R1-253)

0032. John Deere / 134.0SC - - 9". Some pitting. (D81)

0033. CHATTANOOGA CP4003 / (IHC logo) - - 8.5" with hammer head. All markings raised. Excellent. (R1-98)

0034. PAT SEPT 7 97 - 3 / INTERNATIONAL HARVESTER CO. - - 8.5" Vandegrift's patent all metal loop handled screw adjust nut wrench. Good. PAT

0035. 22394VA (IHC logo) - - 8.25" hubcap wrench for early IHC trucks. Good++. (R1-252)

0036. Lot of four:
(1.) Unmarked (Campbell Corn Drill Company - Harrison, Ohio) - - 5.5". Identified from a Campbell Parts Lists for their No. 2 and No. 3 one horse drills. Pitted. (R3-41).
(2.) THE DELAVAL SEPARATOR CO NEW YORK USA / 490. Pitted.
(3.) P28-1/2 (Plano, later IHC) - - Pitted.
(4.) JD-50 (John Deere) - - 6". Small end (on the left side) up variation.

PiCs Lots 24 thru 36

0037. MALSBARY 6180 (Holt Mfg. Co. - Stockton, Calif.) - - 13.5". Holt Mfg. made the Malsbary Gain Drill. Pitted. (R1-306)

0038. Lot of two:
(1.) D34 - U (Deere) - - 8.75". Excellent. (D277)
(2.) 196 (Deere) - - 7". Three long slots and two round hole variant. Good++ with original paint. (D37)

0039. Lot of two:
(1.) F9136 - IHC logo - - 9.5" open end by square socket wrench. Excellent. (R1-253)
(2.) DEERING / HAY RAKE (William Deering & Co. later IHC) - - 6.5". Pitting. (R1-139)

0040. Lot of two:
(1.) C. F. & CO. / C. F. & CO. - - 4". Odd small wrench. Pitting.(no info found)
(2.) PITMAN (Deering / IHC) - - 5.5". Excellent.

0041. OHIO CHILLED / NEW IMPERIAL (B & G Plow Co. - Canton, Ohio) - - 9.75". Excellent. (R1-31)

0042. B.F. AVERY AND SONS / J97 - - 10". Good+. (R1-27)

0043. Lot of three:
(1.) MONITOR DRILL / A763A (Monitor Drill Co. - Minneapolis, Minn., later Moline Plow Co.) - - 8.5". Painted, some pitting. (R1-334)
(2.) WOLVERINE - - 9" flat steel. Rathbone lists as Wolverine Tractor Co. - Detroit, Mich. Probably a plumber's spud wrench. Excellent. (R1-492)
(3.) M555 / <M-H> - MADE IN U.S.A. (Massey-Harris) - - 5.5" pitman wrench. Good++. (R1-312)

0044. DOWAGIAC (Dowagiac Mfg. Co. - Dowagiac, Mich.) - - 9" Good++. (R1-149)

0045. 139 1/2E (IHC) - - 5" by 6.5" tee socket wrench for circa 1907 IHC auto buggies, trucks..Excellent. (R1-250)

0046. F2-0005 (Oliver and Nichols & Sheppard) - - 6" by 8.75" tee socket wrench. (R2-217)

0047. W7 (Blizzard Mfg. Co. - Canton, Ohio) - - 7.25" S-wrench. Good++. (R1-56, R2-36)

0048. B. CO. / 842 (with Illinois Malleable Iron logo) (T. E. Bissell - Elora, Ontario, Canada) - - 9". Good++. (R1-29)

PiCs Lots 37 thru 48

Adjustable Wrenches - Group One (lots 49 thru 119)

0049. Lot of two: Self Adjusting Wrenches
(1.) HOE CORP.- POUGHKEEPSIE, NY / PATENTED FEB 21 - 1922 - 10 - - 11" self adjusting nut and pipe wrench with spring loaded jaws. Patented by Frederic Robert of Lynnbrook, Long Island, NY. Excellent. (S361) PAT
(2.) LAKE SUPERIOR WRENCH CO - SAULT STE MARIE, MICHIGAN - - 6.75" self adjusting nut and pipe wrench. Patented 9-7-1909 by William Hilliard Munro of Sault Ste. Marie, Ontario, Canada and 10-4-1910 by John Boulieu of Sault Ste. Marie, Mich. Good+, black paint. (S362) PAT and PAT

0050. BOSTON WRENCH CO BOSTON, MASS. - PAT'D OCT 2, 1906 OTHER PAT. PENDING - - 8.5" all metal quick adjust rack wrench with a sliding lever that locks the lower jaw in position. Patented by Alphage Gagnon of Springfield, Mass. on Oct. 02, 1906. Good+. (S480) PAT

0051. EVER-GRIP (on side of lower jaw) - - 8" turn handle to adjust wrench. Rarer nut wrench version with smooth jaws and small size. Pat. 9-7-1915 by William Estes of Ozark, Missouri. Fair with finish corrosion, can't read all the markings. (Similar to S626) PAT

0052. Lot of two:
(1.) WADE WRENCH CO. - WHITE PIGEON, MICH. (with a "F" in a circle logo) / DROP FORGED - PAT'D - - 8.25" split handle plier wrench. Pat. Nov. 8, 1927 by William White and July 24, 1928 by Benjamin Wade both of White Pigeon, Mich. Excellent. (S257) PAT. and PAT.
(2.) KANT-SLIP - PAT ARP 27, 20 - AUG 2, 21 - OTHER PATS. PENDING - / A.D. WRENCH. & TOOL CO (Allan-Diffenbaugh Wrench & Tool Co.) - BARABOO, WIS - - 9" plier wrench with a hammer poll. Patented by Allen C. Allan of Baraboo, Wisc. Good+. (S356) PAT.

0053. ACME (inside a Whitman & Barnes logo) - PAT FEB 27, 83 - MADE IN USA / S I ????? AS MFG. CO. - - 5" example of the Acme twist handle nut wrench patented by Frederick B. Seymour of Detroit, Mich. The small Acme and Hercules can be found with several different private brand names. Can't make out the markings on this one. Good+ with weak markings. (S364) PAT

0054. Lot of two:
(1.) LITTLE GIANT - PAT FEB-4-1913 - 8 / GREENFIELD, MASS. USA (with a GTD logo) - - 8" pipe wrench with reversible upper jaw. Patented by Addison B. Carll of Boothwyn, Penn. (he also had the patent for the Carll reversible jaw Crescent type wrenches). Good++. (S600) PAT.
(2.) Unmarked - - 9.5" lever adjust wrench. Similar to the Barwick Wrench patented 6-6-1871 by Wm. Barwick of Montreal, QC Canada. Excellent. (S855) PAT.

0055. Lot of two: Vandegrift patent adjustable nut wrenches.
(1.) Marked only: "11" (David Bradley) - - 8" malleable cast sliding wedge adjust alligator wrench. This one is the smooth jawed nut wrench version. Pat 1-6-1891 by Theodore Vandegrift of Shelbyville, Indiana and mfg. by the Vandegrift Mfg Co of Shelbyville, Indiana. Listed in David Bradley Parts Lists. Good with some pitting. (S546) PAT.
(2.) PAT. SEP 97 - 27 - 26 - - 7" Vandegrift's patent malleable cast metal monkey wrench. Scarce small size in excellent condition. PAT

0056. LEVER WRENCH CO - DULUTH, MINN / HEIMBACK PATENT 1915 - - 8" quick adjust nut wrench with lever and rack teeth. Patented 6-8-1915 by Alton Heimbach of Duluth. Smaller size than normally seen. Good+ with strong markings, light pitting. (S308) PAT.

0057. Lot of two: Variations of The Victor adjustable alligator wrench patented by Charles Bonney of Portsmouth, Ohio. (S37) PAT
(1.) THE VICTOR - PAT MAY 26 03 (on plate over adjusting knurl) - -6.75". Solid handle variation. Good+ with one missing plate screw.
(2.) THE VICTOR - PAT MAY 26 03 (on plate over adjusting knurl) - Kraeuter & Co. (Newark, New Jersey) (on upper jaw) - PAT MAY 26 03 / FOGED HIGH CARBON STEEL (on handle) - - 7". Large hole in handle variation. Good.

0058. W. J. LADD - NO. 77 - NEW YORK - - 12" Coes type monkey wrench. Good+ with a few minor dings.

0059. SARGENT BROSNIHAN - PATENT SEPT. 4, 1900 - - 12." Coes type wood handled pipe wrench with a distinctive serrated jaw inserts/ Made by Sargent & Co. of New Haven, Conn. and patented by Thomas Brosnihan of Livermore Falls, Maine. Good++. (S590) PAT.

0060. W & B CO MADE IN USA (with a diamond logo) (Whitman & Barnes) - - 15" combination nut and pipe wrench with alligator type pipe jaw and a knife type wood handle. Scarce large size. Slice of handle missing. (S866)

0061. GOODELL PRATT COMPANY - TOOL SMITHS - GREENFIELD, MASS - USA - - 9.5" aluminum handled nut wrench with dual threaded shafts. Good++ with some weak markings. (S394)

0062. ROBINSON PATENT JUNE 16, 1885 - - 6" Coes type monkey wrench with the adjusting screw supporting ferrule. Patented by Squire Robinson of Southington, Conn. Scarce small size. Good+ with tight handle crack. (S413) PAT.

0063. ROBINSON PATENT JUNE 16, 1885 - - 15" Coes type monkey wrench with the adjusting screw supporting ferrule. See 6" example No. 62 above for patent info. Good+ with former owner's stamped initials "M. J. S.". (S413) PAT.

PiCs Lots 49 thru 63

0064. Lot of four: Bicycle or Pocket Adjustable Wrenches
(1.) QUEEN (in script) / PATENTED NOV 13, '00 - MAR 11, 'O2 - - 5" solid back variation. Patented by Frank Mossberg and made by Mossberg for ???. Good+. PAT. and PAT.
(2.) PAT AUG 2, 1921 - MADE IN USA - - 5.75" center adjust made by the Park Metalware Co. of Orchard Park, NY. and patented by John Zilliox also of Orchard Park (S99D4) PAT.
(3.) MOSSBERG STERLING - PAT/ NOV 13, '00 - - 5". Good+.
(4.) U. S. (in a diamond logo) / MADE IN U.S.A. (Peter Lowentraut Mfg. Co. of Newark, New Jersey) - - 5.25"

0065. Unmarked - - CRESSEY - PAT MAR, 1876 (weak markings) - - 24" all metal variant of the Cressey pipe wrench. Patented by Isaiah Cressey of Gloucester, Mass. on Mar. 07, 1876. Extra large rare early wrench. Of the few examples of this wrench I have seen this is the first one that has the factory hole through the lower jaw assembly. Good+ with some light pitting. (S595, C111) PAT.

0066. BEMIS & CALL - SPRINGFIELD, MASS / B & C TRADEMARK logo - - 16" combination nut and pipe wrench with short hex adjusting nut. Good+.

0067. 14" MAGMUM PIPE WRENCH / MAGNUM TOOL CO - PAT PEND / MUESCO - - 13.5" self adjust wrench with a pivoting, spring loaded upper jaw that can be set to four different notches on the handle. Patented by Carlos V. St. Claire, San Bernardino, CA. Also found with additional markings "Muesco - Houston, Texas". Good++. (S335) PAT.

0068. BEMIS & CALL COMPANY - SPRINGFIELD, MASS. - MADE IN USA / B & C Trademark logo - - 12" woolen handled nut wrench with four ring adjusting sleeve. Patented by W. Chaplin Bemis of Springfield, Mass. on 12-2-1873. Wrench has been modified to work as a quick adjust. Good++. PAT

0069. FULTON "AD" - - 12.5" knife type wood handled monkey wrench, The Fulton brand was used by both The United Hardware & Tool Corp. of New York and Sears & Roebuck. Rare imprint, first seen on a monkey wrench.. Good+.

0070. THE BABCOCK PRINTING PRESS - NEW YORK / THE H. D. SMITH & CO - "PERFECT HANDLE" - PAT'D Oct. 30, 1900; Jan 15, 1901; and Feb 26, 1901 MADE IN USA - - 12" wood handled monkey wrench. Patents for the H. D. Smith monkey wrenches were issued to Amos Shepard and William Ward of Plantsville, Conn. First Perfect Handle wrench I have seen with an imprint other than Russwin. Good++ PAT

0071. THE H.D. SMITH & CO. - 10 IN / "PERFECT HANDLE" PATENTED - - 10" wood handled pipe wrench. Good.

0072. PAT SEP 7, 97 / 30 - - 9" wood handle version of the Vandegrift patent monkey wrench. Some hammer mushrooming. (S966, C313) PAT.

0073. UNION HARDWARE CO. - TORRINGTON, CONN. USA (some markings unreadable - - 10" Briggs's Pattern combination nut and pipe wood handled monkey wrench with hex adjusting nut. Good with some minor dings, no patina. (S581)

0074. CRAFT 14 IN / THE CRAFTSMAN TOOL CO. CONNEAUT, O. - PAT NOV 1907 - - 14" size of the Craft roller jaw wrench, exposed gear variation. Patented Nov. 12, 1907 by George Heckling of Cleveland, Ohio. Good+ with some grind marks on upper jaw. (S663, 664) PAT.

0075. Lot of three:
(1.) STILLSON WRENCH MADE BY MOORE DROP FORGING CO. - SPRINGFIELD, MASS. (not all markings are readable - - 6" Wood handled Stillson type pipe wrench. Good.
(2.) Unmarked - - 4.5" side adjust bike wrench with enclosed adjusting gear. Good+.
(3.) BOOS TOOL CORP - CHROME-MOLYBDENUM - K.C. MO. - PATENTED - - 6.5" Turn Handle To Adjust wrench. Both jaws are smooth variation. Patented by Joseph B. and Lyal R. Boos of Kansas City, MO. Good. (see S381) PAT.

0076. 4-6 DIAMOND CALK HORSESHOE CO (with horseshoe and diamond logo) - DULUTH, MINN. / DIAMALLOY FORGED STEEL, (etc.) - - 6" double ended Crescent type adjustable wrench with 4" and 6" heads. Rare size in the Diamond brand. Excellent with plated finish. (not in Schultz)

0077. ROBINSON / DROP FORGED STEEL - - 8" curved handled Crescent type. Good++. (S307)

0078. THE BILLINGS & SPENCER CO. - - 6" curved handle Crescent type. Formerly in the Herb page collection, Excellent.

0079. BARCALO - 6 / BUFFALO - - 6" curved handle Crescent type with open handle. Good+.

PiCs Lots 64 thru 79

0080. AIGO - - 4" Crescent type wrench.

0081. G/S in a hex logo - - 4" Crescent type wrench

0082. 4 IN. BET'R-GRIP MADE IN U.S.A. / 4 IN. FORGED VANADIUM STEEL 5/16 IN. - - 4" Crescent type with 5/16" hex box wrench at end of handle shaft

0083. 4in. "SUPERJUSTABLE" PATD - U.S.A. / J-H-WILLIAMS & CO - FORGED / ALLOY - - 4" Crescent type. Scarce early example with the "PATD" marking.

0084. 91-4 UTICA TOOLS U.S.A. / ALLOY - UTICA - STEEL - - 4" Crescent type.

0085. 4in. = CRAFTSMAN = SLC. / 4in.= FORGED ALLOY = IN USA - - 4" Crescent type.

0086. 4 IN. = CRAFTSMAN = / Y (in a circle logo) 4 IN. = FORGED IN USA = - - 4" Crescent type.

0087. Lot of two: 4" Crescent Type Adjustable Wrenches
(1.) PROTO 704S / USA - - Has wider head than normal. Excellent.
(2.) DIAMOND HORSESHOE CO. - DULUTH, MINN, / DIAMALLOY STEEL USA - - Good+.

0088. Lot of four: Diamond Calk Horseshoe Co. and Diamond Tool & Horseshoe Co. 4" Crescent Types Adjustable Wrenches (several variations)

0089. Lot of four: Crescent and Diamond Brand Crescent Wrenches (several variations)

0090. Lot of four: Crescent Tool Co. 4" Crescent Wrenches (several variations)

0091. Lot of four: Crescent Tool Co. 4" Crescent Wrenches (several variations)

0092. Lot of four: Crescent and Diamond Brand Crescent Wrenches (several variations)

0093. Lot of four: Crescent Tool Co. 4" Crescent Wrenches (several variations)

0094. WAKEFIELD POCKET WRENCH (some weak markings) - WORCESTER, MASS USA / PAT APL'D FOR - - 4.5" side adjust with hollow handle, Good++, plated finish. (not listed)

0095. G & J MF'G Co Chicago / C. E. BILLINGS PAT'D FEB 18TH 1879 (with a ruler scale on shaft) - - 5" center screw adjust bicycle wrench with an unique bulbous end. Evidently made exclusively for Gormully & Jeffery Mfg. Co. of Chicago, early manufacturer of Rambler bicycles. Patent was issued to Charles E. Billings of Hartford, Conn. and was the basis for several of Billing & Spencer's early adjustable wrenches and later copied by other wrench manufacturers after the patent expired. Good+ with some edge dings. (S857) PAT

0096. ROLLFAST PERFECT / MADE IN USA - - 3.75" bicycle spoke or nipple wrench. Good+, replaced adjustment screw. (not listed, similar to S110L)

0097. VICTOR - OVERMAN WHEEL CO - CHICOPEE FALLS, MASS - PATENTED JAN 6, 1891 - - 5" center screw adjust with ruler markings on the shaft (hollow handle, both sides solid variant). Patented by John Stanley of Coventry, England. The Overman Wheel Co. made "Victor" bicycles. Excellent with plated finish. (S101) PAT

0098. DENVER CYCLE MFG. CO. - J. C. SPEIRS & CO / DROP FORGED - - 5" center screw adjust with skeleton frame patented by John C. Speirs of Worcester, Mass. on 3-26-1895. A quick internet search found that the Denver Cycle Mfg. Co. was in Denver only from 1894 to 1898. Good+ with some edge dings. (like S106B, C284) PAT.

0099. Safety T & L NY (Tower & Lyons) - - 4.25" center screw adjust bike wrench. Patented July 14, 1891 by John J. Tower of Brooklyn, NY. Good+ with a few minor dings, plated finish. (S102D4) PAT

0100. Lot of six: Display case with Six Small Wrenches and Other Tools. Owner had them displayed in this case so I kept them together.
(1.) LANGLINE RB810 MADE IN USA 1/4 - 5/16 / PAT. NO. 2500835 - - 4.25" double ratcheting box end wrench. Patented by John W. Lang of Racine, Wisc. on Mar. 14, 1950. Good++. PAT.
(2.) STANDARD TOOL CO. - ATHOL, MASS. (weak markings) - - 4" all metal square. Standard Tool Co. also made a quick adjusting nut wrench, Good+.
(3.) KANT TWIST P/N 501 1" - PAT. APP. - - 2.5" early and smallest model of the Kant Twist Clamps. Patented by John N. Saxton of Baldwin Park, Calf. on Dec. 13, 1955, Good++. PAT.
(4.) No name - - 4.5" 1/4" ratchet with slide through drive plug. Good++.
(5.) Marked only 1 INCH CLAMP - - 2" MINATURE C-clamp. Good++.
(6.) Unmarked - - 6" Stillson pattern pipe wrench. Good.

0101. Lot of four: Miniature Adjustable Wrenches
(1.) MADE IN HONG KONG - - 3.5" pipe wrench . Excellent with plated finish.
(2.) MARX (Louis Marx and Co, - NY, NY) - - 3.75" miniature pipe wrench made by a toy manufacture. Excellent with plated finish.
(3.) RED'S BAR - HANNAH, N. DAK / MADE IN USA - - 3" miniature adjustable nut wrench with screwdriver end. I've seen these little wrenches advertising several different types of business but this is the first one from a bar. A place where they sell beer and give away wrenches! A beer drinking wrench collector's dream. Excellent.
(4.) DOMT LTD / MADE IN ENGLAND - - 3.25" miniature adjustable nut wrench, Excellent.

0102. THE L. S. STARRETT CO. ATHOL, MASS. USA - - 5" RPM speed indicator. Good++.

0103. Lot of two: Acme and Hercules Pocket Wrenches. Frederick Seymour's Feb. 27, 1883 patent applies. PAT
(1.) HERCULES (inside a Whitman & Barnes logo) - MADE IN USA - - 4.25" screw adjust pocket or bike wrench with knurled adjusting screw knob. Good++, nickel plating, some minor edge dings. (S364)
(2.) W. W. W. CHICAGO / ACME ( in a diamond logo) PAT FEB 27, 83 - - 4.25". Pre Whitman & Barnes type with ridged adjusting screw knob . Good with weak markings, jaws slightly sprung. (like S364T) (not in photo)

0104. THE NO??? PAT. FEB. ??, 97 - - 5.5" combination quick and screw adjust bike wrench very similar to the Woodbury wrench but with slightly longer and different markings. Can't read all the markings so can't identify. Good with spots of pitting, unreadable markings. (not listed)

PiCs Lots 80 thru 104

0105. - C - MOSSBERG WRENCH CO. - ATTLEBORO, MASS. USA - Pat Nov 19 & Dec 31, 95" - - 5" center screw adjust bike wrench. (S103B)

0106. SANDOW (in decorative lettering) THE LAVIGNE & SCOTT MFG CO, - NEW HAVEN, CT - PAT FEB. 5, 95 - - 5" center screw adjust with skeleton handle. Patented by Joseph P. Lavigne of New Haven, Conn. Good++ with stronger markings than usually found, plated finish. (S109B) PAT

0107. STEVENS & CO. - - 5.25" side adjust bike wrench. Good with some weak markings.

0108. THE BECKLEY-RALSTON CO. - CHICAGO - - 5.25" side adjust bike wrench with recessed panels on shaft. Good++, plated finish.

0109. L. & S (Lamson & Sessions) - BUCKEYE - - 5.5" side adjust bike wrench. Good+.

0110. CHARLES E. HALL CO. - BUFFALO, NY USA - NO. 11 (with a "H" in a shield logo) - - 5" side adjust bike wrench. Good+, plated finish.

0111. PAT'D JUNE 7TH 1892 (with a "G" in diamond logo)- - 4.5" turn handle to adjust nut wrench with a small bicycle spoke wrench attachment. Made by the Gendron Iron Wheel Co. of Toledo, Ohio. Wrench patent was issued to Peter Gendron of Toledo, Ohio. Good+ with dent on one side, plated finish. PAT

0112. CHARLES E. HALL CO. - BUFFALO, NY USA - - 7" side adjust with cotter key tools on each end. This was Hall's No. 15 model. Good+ with some dings. (S1098B)

0113. IVER JOHNSON (Iver Johnson Arms & Cycle Co. of Fitchburg, Mass.) - MADE IN USA - - 6" side screw adjust with tire tool end. Good++, plated finish. (S99D2)

0114. STEEL BICYCLE / L. & S. CO. (Lamson & Sessions) - CLEVELAND, 0 - - 5" Wood handled center screw adjust bike wrench. Shorter example of two known sizes. Good++, with former owner's initials "O. W." carved in handle, plated finish. (S104)

0115. COES WRENCH CO. - - 4-5/8" "Baby Coes" desirable small size wood handled monkey wrench. This marking version was made only made during 1888-80. Good++, better condition than most seen. (HP47, like S852)

0116. WESTMINSTER / (ruler markings on shaft) - - 5.5" side adjust bike wrench. Good++. (not listed)

0117. WALD MFG CO - SHEBOYGAN, WIS. - MADE IN USA - - 5" side adjust bike wrench with enclosed adjusting gear. Rare marking variant, usually found marked "MAYSVILLE, KY". Good++, plated finish. (not listed)

0118. COES / PAT'D DEC 24, 1901 - MADE IN USA - - 5" all metal bicycle wrench with oval handle. Patented by Frederick Searle of Worcester, Mass. Good+ with some minor edge dings. (HP57, S852) PAT

0119. Lot of seven: Bicycle and Pocket Type Wrenches
(1.) Unmarked - - 5.25" side adjust bike wrench with guarded adjusting screw. Good+.
(2.) A-2 (marked on upper jaws) - FRANK MOSSBERG CO. Etc. - - 5.5" side adjust bike wrench.
(3.) A-5 - PAT'D NOV. 13, 00 - MAR. 11, 19O2 - - 5.5" side adjust bike wrench. Patents were issued Frank Mossberg of ATTLEBORO Mass. Some grind marks. PAT.
(4.) MEAD CYCLE CO. - CHICAGO - DROP FORGED / U. S. (in a diamond logo) (Peter Lowentraut Mfg. Co. of Newark, New Jersey) - - 5.5" side adjust bike wrench. Haven't seen the Mead Cycle Co. imprint on this wrench before. Good+.
(5.) Unmarked - - 5.5" side adjust bike wrench.
(6.) BARNES 98 (in fancy script) - - 5.25" side adjust bike wrench with guarded adjusting screw. Good+, weak markings. (S117)
(7.) Unmarked - - 5.75" sliding wedge adjust nut wrench. Pitting.

PiCs Lots 105 thru 119

Fencing Tools - Fence Stretchers - Group Two (lots 120 thru 134)

0120. S5 / S4 - - 19" cast malleable iron lever type fence stretcher. Good++. (Smith 376)

0121. Unmarked - - 24.5" lever fence stretcher. Patented June 4, 1907 by John Albin of Colorado Springs, Colorado. Crudely made looks like shop made tool. (Smith 401) PAT.

0122. marked only "16" - - 29" heavy cast malleable iron fence stretcher. Identified in Smith book No. 200 as "Page Pivoting Block Stretcher". Good++, not cleaned.

0123. WS790A - WS790B - - 20" cast malleable iron lever type fence stretcher and stable puller. Good++. (similar but different to Smith 326).

0124. PAT. JULY 16, 1907 - - 32" wooden handled fence stretcher. Patent was granted to Moses E. Johnson of Pittsburgh, Penn. Good+. (Smith 338)

0125. Unmarked - - 31.5" walk along fence stretcher similar to Smith No. 486. Good++.

PiCs Lots 120 thru 125

0126. BRONKO TITE SPLICER - PAT. PEND. = 2.50 EACH / J H GIBBON - PRIMGHAR IOWA - - 20.5". Excellent with most of the original red finish. Didn't find patent.(couldn't find in Smith's book)

0127. N & F WHITESEL STRETCHER & SPLICER / PAT'D SEPT. 15 - 14 - OTHER PATENTS PENDING - - 28" heavy cast malleable iron. Patent was granted to Newton and Fredrick Whitesel of Watertown, Nebraska on Sept. 15, 1914. Good+, not cleaned, one piece may be broken off. (Smith 294) PAT.

0128. Can't read markings - - 28" all metal stretcher, handle is broken. (can't find in Smith's book)

0129. PAT DEC 8, 85 - - 32" walk along fence stretcher. Patented by Andrew J, Upham of Sycamore, Illinois. Good++. (Smith 486) PAT.

0130. Unmarked - - 37".all metal fence stretcher. Patented Sept. 15, 1914 by Newton and Fredrick Whitesel of Watertown, Nebraska. Good++, one spring end is broken, not cleaned. (Smith 293) PAT.

PiCs Lots 126 thru 130

0131. Unmarked - - 39" lever type fence stretcher. Crude, may be shop made. Similar to Archibald S. Runyon's (St. Louis, Missouri) Jan 3, 1888 patent. Good++. (Smith 388) PAT.

0132. Unmarked - - 30" walk along type fence stretcher. Patented by James M. Merrit of Marengo, Iowa on Nov, 26, 1889. Excellent. PAT.

0133. Unmarked - - 32" walk along type fence stretcher. Old weld repair, broken piece.

PiCs Lots 131 thru 133

0134. Lot of six: Five Walk Along Fence Stretchers and a Klein Lineman's Strap. Will be sold choice item.
(1.) M. KLEIN & SONS - - Brass and steel hook and clamp with leather strap. Strap is broken.
(2.) Unmarked - - 34" walk along type fence stretcher. Some pitting.
(3.) 15J - 31J - 32J - - 30" walk along type fence stretcher.
(4.) Unmarked - - 31" walk along type fence stretcher. Good++.
(5.) PAT DEC 8, 85 - - 32" walk along fence stretcher. Patented by Andrew J, Upham of Sycamore, Illinois. Good++. (Smith 486) PAT.
(6.) PAT DEC 8, 85 - - 32" walk along fence stretcher. Patented by Andrew J, Upham of Sycamore, Illinois. Weld repair. (Smith 486)

PiCs Lot 134

Farm Equipment Type Wrenches, Etc. - Group Two (lots 135 thru 149)

0135. Lot of two: Ford tractor and plow double open ended forged wrenches marked: FORD (script inside a oval) - 9N17014 - USA and ruler markings - - 10.5". Good++.

0136. 767 (Monitor-Moline) also some unreadable ghost markings - - 9". The scissor wrench. Good+. (R1-332)

0137. 246 (Marseilles Mfg. Co - Marseilles, ILL. / Deere) - 13" tee wrench. Some light pitting. (D51)

0138. Z2 SYRACUSE (Syracuse Chilled Plow Co. / Deere) - - 10.5". Two hammer heads, small end up variation. Good++. (D553)

0139. Unmarked (Melotte Cream Separator) - - 7.75". Excellent. (R1-325, R2-197)

0140. 286 (Blount Plow Works, Evansville, Ind.) - - 10". Fancy multi-opening wrench, wing nut opening variation. Good++ with overall casting roughness. (R2-37)

0141. JOHN DEERE (B353R) - 15.75" Flat shaft, double twelve point box end wrenches. Some pitting. (D249)

0142. OLIVER / CP245 - - 9.25". Pitted. (R1-361)

0143. Lot of two: International Harvester Wrenches
(1.) 11858DA (IHC logo) - 5.5" flat steel hook spanner for Farmall tractor water pumps. Spots of minor pitting,
(2.) Marked with American Bosch logo (on the wrench) and SPARKPLUGS (on the gauge) (IHC No, 17601D) - - 3.5" magneto wrench and sparkplug feeler gauge. Good++.

0144. MILWAUKEE (Milwaukee Harvester Co? later IHC) - - 15.25". Large hub type wrench. No number variant. Good+. (R1-328)

0145. MONARCH 226 (Lisle Mfg. Co. - Clarinda, Iowa) - - 4.5" cream separator wrench. Good++ with surface roughness. (R1-297)

0146. 642 (Gale / Ohio Rake) and a "P" in a circle logo - - 6.75". Oddball with a wing nut opening. Excellent. (R1-193, R1-359)

0147. Lot of five: Assorted Farm Wrenches
(1.) OK1294 - Case Eagle logo (Case T. M. Co.) / A (and an Illinois Malleable Iron logo) - 9". H-shaped with pitman flange. The "goal post wrench". Good+. (R1-82).
(2.) EMERSON - - 10".
(3.) Dain (John Deere) / Z78 - D 6.5" pitman wrench. Good+, not cleaned. (D561)
(4.) <M-H> Z435 - - 8" with hang hole, one raised dot on reverse variation. Excellent.
(5.) 3050 FOR PITMAN (Adriance / Moline Plow Co.) - - 7.25".

PiCs Lots 135 thru 147

0148. MANUFACTURED BY TWENTIETH CENTURY BRASS WORKS - MINNEAPOLIS, MINN. - - 58" brass grain probe sampler with nine openings and a wooden knob. Excellent.

0149. Lot of two:
(1.) Unmarked - - 62" wooden handled church window opener pole. Good++.
(2.) Unmarked - - 48" wooden handled double headed cultivator and weeding hoe.

PiCs Lots 148 and 149

Fencing Tools - Group Three - Wire Grips, Grabs and Tugs (lot 150)

0150. Lot of Twelve: Wire Grips, Grabs, Tugs, Etc. Will be sold choice item
(1.) W. U. TEL. CO. (Western Union Telegraph Co.) - WIRE GRIP No. 1 - DIXIE TOOL CO. - DOWNERS GROVE, ILL. USA - - 9.25" wire grip. Good++.
(2.) WIRE GRIP No. 1 - TRADEMARK REG. U. S. PAT. OF. - WESTERN ELECTRIC - PAT. U. S. NOV. 25, 1910 - CAN. JUNE 13, 1911 - - 9" wire grip. Good++.
(3.) W. U. TEL. CO. (Western Union Telegraph Co.) - BUFFALO GRIP TRADEMARK - WESTERN ELECTRIC - MADE IN USA - - 9" wire grip. Good++.
(4.) Marked only "1613-30" - - 9.75" wire grip. Slightly different design than first three above. Good++.
(5.) Unmarked - - 7" wire grip, stretcher. Patented Aug. 30, 1881 by Martin a, Howe, Jr. of Chicago, Illinois. Excellent. (Smith 779) PAT.
(6.) 7 SCE CO. - - 6" wire grip, stretcher. See No. 5 above for patent info. Excellent. (Smith 779) PAT.
(7.) Unmarked - - 8: wire grip with swivel. Excellent.
(8.) 25A DURBIN DURCO INC.- ST. LOUIS 5 MO - - 5.75" Good++. (Smith 753)
(9.) 25A DURBIN DURCO INC.- ST. LOUIS MO - - 5.75" Good++. Excellent, like new, original finish. (Smith 753)
(10.) Unmarked - - 10" wire grip with double pulley, Pitted. (can't find in Smith's book)
(11.) Unmarked - - 7.75" wire grip. Looks shop made.
(12.) Unmarked - - 7.75" wire grip. Looks shop made.

PiCs Lot 150

Adjustable Wrenches - Group Two (lots 151 thru 183)

0151. BEMIS & CALL CO. - 12 IN 48A / B & C - SPRINGFIELD MASS USA - - 12". Nice example of the 12" B & C Crescent type adjustable wrench (closed handle variation). Good++.

0152. Lot of two: Bonney Curved Handle Crescent Type Adjusting Wrenches Will be sold choice wrench.
(1.) BONNEY 10 IN ADJ. S. / ALLENTOWN, PA USA - - 10" with solid handle. Minor jaw edge ding, otherwise excellent with original black finish.
(2.) BONNEY - PATENTED JUNE 1, 1915 / 8 IN - - 8" with open handle. Patented was granted to Joseph G. Baker of Allentown, Penn. for the adjusting knurl spring. Good Plus. PAT.

0153. BONNEY / 6 IN - - 6" curved handle Crescent type adjustable wrench. Some minor dings on jaw face and edges otherwise excellent with original black finish.

0154. U S & M CO (United Shoe and Machine Co) - MADE IN USA - NEWARK N.J. - 6 IN - - 6" curved handle Crescent type adjustable wrench. Rare size in excellent condition except for some minor jaw edge dings I don't think I have seen this wrench in the six inch size before.

0155. C. MFG. CO. - NEW YORK USA - - 6" curved handle Crescent type adjustable wrench. First one I have seen. Good++. (not listed, no info found)

0156. Lot of two: Billings & Spencer Curved Handle Crescent Type Adjustable Wrenches
(1.) 6" - - Good+ with some dings on lower jaw face.
(2.) 8" - - This one is also marked PAT. NOV. 15, 1905. Patent was issued to William R. Tomlinson of Hartford, Conn. for an adjustment lock. The head of the lock has been sheared off on this example. Good+ with minor dings on lower jaw face. PAT.

0157. Lot of two: Robinson Curved Handle Crescent Type Adjustable Wrenches
(1.) 6" - - Good++.
(2.) 8" - - Excellent.

0158. Lot of three: Queen City - Bergman Tool Mfg. Co. Curved Handle Crescent Type Adjustable Wrenches
(1.) 6" - - Good++.
(2.) 8" - - Good
(3.) 10". - - Poor, pitted.

0159. 4 IN QUEEN CITY / BERGMAN O" BUFFALO - - 4.25" curved handle Crescent type adjustable wrench. Rare 4" Queen City to complete set Lot 158 above. Excellent.

0160. Lot of two: Speednut Self Adjusting Nut Wrenches
(1.) COCHRAN SPEEDNUT WRENCH - PATENT PENDING./ PATENT PENDING - COCHRAN "SPEEDNUT" WRENCH - - 9" self adjust nut wrench. Design patent was issued to Walter W. Taylor, Chicago, ILL. Good++. (similar to S320, C283) PAT.
(2.) MFD BY CHICAGO MFG. & DIST'G - CHICAGO USA / 8" FORGED SPEEDNUT - STEEL - PAT. 1602620 - 1830033 - 8.25" Speednut self adjusting wrench with a different manufacturer. Excellent. (not listed) PAT.

PiCs Lots 151 thru 160

0161. Marked only WARRANTED TOOL STEEL - - 15" combination nut and pipe wood handled center screw adjust wrench. This wrench was advertised as "Rouse's Yankee Combination Pipe, Bolt and Nut Wrench". Patented by J. Sanders 7-18-1882 and mfg by R. R. Rouse Mfg. Co. of Indianapolis, Indiana (earlier by Noblesville Foundry & Machine Co. of Noblesville, Indiana). Good+ with a few minor dings, replaced handle, stamped owner's ID "J. R. KILLEN". (see S618, C270) PAT.

0162. ARMSTRONG BROS TOOL CO. / 6 - ARMSTRONG BROS (with Armstrong's arm & hammer logo) - - 6" pipe wrench. Rare size. Patented May 26, 1924 by John V. Larson of Chicago, ILL. Excellent. (C42) PAT.

0163. TIGER GRIP MP'LS (MINNEAPOLIS) MINN. / DROP FORGED - PAT APLD - - 6" hinged end self adjusting alligator wrench. Good+. (S719)

0164. Unmarked (Baxter's "S" Model Wrench) - - 10". Applicable patent was issued to William Baxter of Newark, New Jersey on Dec. 1, 1868. Good+. (S305, C56) PAT

0165. Unmarked (Baxter's "S" Model Wrench) - - 8". Same patent info as No. 184 above. Good+. (S305, C56) PAT

0166. Unmarked (Baxter's "S" Model Wrench) - - 6". Same patent info as No. 184 above. Good+. (S305, C56) PAT

0167. Unmarked (Baxter's "S" Model Wrench) - - 3.75". Same patent info as No. 184 above. Excellent. (S305, C56) PAT

0168. THE ADJUSTABLE TWIN WRENCH PATENTED JAN. 5, 1915 - - 6" double ended bicycle or pocket wrench with nut and pipe heads. Largest of two known sizes. Patented by John Anderson and John Elmer Anderson both from Portland, Conn. Good++. (S108) PAT.

0169. D.R.G.M - STAHL - - 4.75" twin jawed turn handle to adjust nut wrench. Good++.

0170. WM. HJORTH JAMESTOWN N.Y. - PAT SEP. 8, 1903 - - 8.25" combination plier wrench tool with a wire cutter, screwdriver, and tack puller. Patented by Arthur W. Hjorth of Jamestown, NY. Excellent. (like Smith No. 75, not in Schulz, C168) PAT.

0171. Lot of two: Adjustable Wrenches
(1.) Unmarked - - 6" riveted sheet metal screw adjust nut wrench. Good++. (S99B)
(2.) GELLMAN WRENCH CORP. - ROCK ISLAND, ILL USA - POLLY / PATENTED APRIL 17, 1923 - 6 IN. NO. 61 - - 6".quick adjust nut wrench, external spring variation. Patented by Israel Gellman of Chicago, ILL. Good++. PAT

0172. CARLL / PAT'D MAY 6-13 / 6 IN. DROP FORGED STEEL - - 6" Crescent type with reversible jaws for nuts or pipe. Patented by A. B. Carll of Boothwyn, Penn. Good++. (S568) PAT

0173. Lot of two: Self Adjusting Nut Wrenches
(1.) BESSEY - PATENT, Etc. / NO. 101-Gr.2 - MADE IN GERMANY (etc.) - - 6.25". Excellent, plated. (not listed)
(2.) LARCOLOY - CHICAGO USA / 6" AUTOMATIC - PAT PEND. - - 6.5". Patent was granted to John V. Larson and August Kuring (both of Chicago, ILL.) on Oct. 12, 1926. Good with some light pitting. (C199, like S320) PAT

0174. (USHCO logo) LAWSON - U. S. H. CO. Mfg Co. (U. S. Hame Co.)- Buffalo, USA / PATENTED DEC 14, 1920 - DROP FORGED STEEL - - 6" angled head pipe wrench. Patented was issued to Gottfrid C. Lawson of Cleveland. Scarce small size in Excellent condition. (S609). PAT

0175. Lot of three: Two unmarked 6" and 9" twist handle nut wrenches, lighter and simpler version of the Acme wrenches. These wrenches resemble Frederick Seymour's Feb. 27, 1883 patent drawing more closely than the Acme and Hercules wrenches do. (S364). Also a 5.5" similar unmarked loop handle wrench. All in Excellent condition. PAT

0176. STAR WRENCH - 6 - - 6" all metal pipe wrench with only three parts. Mfg. by the Star Wrench Co. of St. Louis, MO. and later the Van Auken Steam Specialty Co. of Chicago. Scarce wrench in any size, more so for a six incher. Good++. (C287, C312)

0177. "VICTOR" TRADEMARK / PAT. DEC 23, 1902. PAT. AUG 25, 1903 - - 8" quick adjust pipe wrench made by the Bonner Mfg. Co. of Chrisman, ILL. and patented by Clarence E. Bonner, Cherrypoint, IL. Good+. (S653) PAT.

0178. COMO WRENCH CO. - ROCKFORD, ILL. - DROP FORGED- - 10" unique screw adjust pipe wrench consisting of only three pieces with a slotted threaded upper jaw that fits over the wrench handle. Usually found marked "Chicago", only second one seen marked "Rockford, ILL". Patented Oct. 14, 1913 by Joseph Anthony Schlehr of Chicago. Neat small size. Excellent. (S589) PAT.

0179. COCHRAN - 10 IN - PAT'D 1908 / MODEL 1910 - MFG. IN CHICAGO, ILL USA. - - 10". Modified Stillson type with a patented "rocking collar". The patent was issued to James M. Cochran of Paducah, KY on April 21, 1908. Also found marked "Mfg. in New Haven. Conn." Good++. (S588) PAT

0180. VISE-GRIP - DEWITT, NEB / PAT'D. APR. 8, 24 - DEWITT, NEB. - - 9" second model Vise-Grip. First model to have a locking lever. Patent was issued to William Petersen of DeWitt, Nebraska. Good+ with some top edge dings. (S262) PAT.

0181. JUNE 20, 1899 - - 6.75" plier like tool patented by William H. Edwards of Rockford, Illinois as an "Adjustable Nut Cracker" but the patent specifications note it could be used as a pipe wrench. Good+, some pitting. PAT

0182. RATCHLOK / SUMMIT TOOL CO - DENVER, CO - PAT NO. 3564956 - - 11" odd locking pliers with extra long handle and a V-notched jaw. Patented by Brenard Landen of Fountain, Colorado. Scarce newer wrench in Excellent condition. (not listed) PAT.

0183. Lot of three: Boos 6", 8, and 9" Turn Handle to Adjust Wrenches. All marked BOOS TOOL CORP - CHROME-MOLYBDENUM - K.C., MO.- PATENTED - - All are the serrated top jaw and smooth bottom jaw variations. Patented by Joseph B. and Lyal R. Boos of Kansas City, MO. All Excellent. (see S381) PAT

PiCs Lots 161 thru 183

Farm Equipment Type Wrenches, Buggy Wrenches, Etc. - Group Three (lots 184 thru 234)

0184. DIAMOND WRENCH MFG. CO. - STEEL FORGED - PORTLAND, ME / PATD NOV 2, '80 - OCT 16, '83 - - 12". A large wing nut on a threaded shaft adjusts the double headed wooden handled wrench (one with regular nut wrench jaws and the other for buggy or wagon nuts). Patented by H. A. Thompson of Farmington, Maine. Good with some hammer dings, some markings not readable, replaced handle nut (S208) PAT

0185. SUSQUEHANNA FERTILIZER CO. / OF BALTIMORE CITY MD. - PAT MAY 2, 93 - 7/8 - (with a ZB logo) - - 8.5" odd cast buggy wrench patented by James K. Byler and Henry S. Zook, both from Morgantown, Penn. Good++. (R447) PAT

0186. NEVERSLIP with in and off pointing arrows - - 9".horse shoe calk wrench. Good+.

0187. FORDSON (marked below jaws) - - 10". Rare marking variation of the Fordson Tractor curved handle Crecent type wrench. Good+

0188. FORDSON - - 6" double open end wrench for Fordson Tractors. Excellent, like new. (R1-180)

0189. FORDSON - THE KEYSTONE MFG CO / BUFFALO NY USA - 10 INCH NO 80 - - 10.25" curved handle Crescent type wrench, Fordson Tractor tool box wrench. Good++, not cleaned. (R1-180)

0190. PAT SEPT 7 97 / INTERNATIONAL HARVESTER CO. - - 8.5" Vandegrift's patent all metal loop handled screw adjust nut wrench. Good+. PAT

0191. LACKAWANNA - 3/8 - 1/2 (same markings both sides) - - 9" double open end S-wrench. Good++. (not listed, no info found)

0192. Lot of four: PLANET JR. (S. L. Allen & Co. - Philadelphia, Penn.) Wrenches. Including a No. 3 cutout . - - 6.25" with small hammer heads. Good++ to Excellent.

0193. NEWELL SANDERS PLOW CO / A163 (later IHC) - - 8.5" with hammer head. Good, painted. (R1-351)

0194. Lot of two: Small Farm Wrenches
(1.) B & H / 1372 (Bickford & Huffman - Macedon, NY) - - 5.75". Good+, not cleaned. (R1-32)
(2.) DREDNAUT / ST JOSEPH, MICH. - - 6" double hex box end. Good++. (R1-151)

0195. NICHOLSON / 0 - - 6.5". scarce small size. Good++. (R1- 353)

0196. B. F. AVERY & SONS - G176 / Louisville KY USA - - 9". Good++, not cleaned. (R1-27)

0197. 1249 (Evans Mfg. Co. - Hammond, New York) - - 14". Rare. Good++. (R2-91)

0198. Famous Ohio - J276 (Ohio Cultivator Co. Bellevue, Ohio) - - 9.5". Good+, not cleaned. (R1-357)

0199. J. H. CO / 630 (Johnston Harvester Co. Batavia, NY, later Massey-Harris) - - 14.5". Check yours, some are only 13" long. Good++. (R1-272)

0200. 718 with "CH" logo (Pattee Plow Co - Monmouth, Illinois) - - 11.75". Good++. (R1-373)

0201. Lot of two: Janesville Machine / Samson Tractor Co. B and 750367 Wrenches
(1.) Marked only "B" (Janesville Machine Co., Later Samson Tractor Co.) - - 9". Pitting. (R2-256)
(2.) 750367 (Samson Tractor Co.) and a "CH" logo - - 9". Replaced the Janesville Machine Co. "B" wrench above after the formation of the Samson Tractor Co. Good+ with some light pitting. (R2-256)

0202. 733 (C. B. & O - Chambers, Bering, Quinlan Co. - Decatur, Illinois, also IHC) - - 7.5". Good+. (R1-73)

PiCs Lots 184 thru 202

0203. PRINCESS / PRINCESS (Princess Plow Co. - Canton, Ohio) - - 9.5". Pitted. (R1-386)

0204. F2-0005 (Oliver and Nichols & Sheppard) - - 6" by 8.75" tee socket wrench. Good++, not cleaned. (R2-217)

0205. Lot of three: Farm Wrenches
(1.) 5089 (Avery Co. - Peoria, ILL) - - 10" Tee socket wrench, four socket variant. Good+. (R1-26)
(2.) GALE 21 (Gale Mfg. Co. - Albion, Mich.) - - 8.5". Good+. (R1-193)
(3.) HH (orphan, possibly Badger Cultivator) - - 9.75". Good. (not listed, no info found)

0206. HAYES / A375 (Hayes Pump & Planter Co. - Galva - ILL.) - - 6" by 3.75". Good+. (R1-227)

0207. IOWA CREAM SEPARATOR (Waterloo, Iowa) - - 7". Double open end S-wrench. No markings on reverse side variant. Good++. (R1-259)

0208. U.S. SEPARATOR - - 5" bicycle style wrench for the United States Cream Separator made by the Vermont Farm Machine Co. of Bellows Falls, Vermont. Good+, . (R465)

0209. Lot of three: Three Small Double Opened Ended S-Wrenches
(1.) 1252 (Adriance, Platt & CO., Poughkeepsie, NY later Moline Plow Co.) - - 5.25". Good++, painted. (R1-5)
(2.) 78 (Hart Grain Weigher Co) - 5.75". Good+. (R3-104)
(3.) 78 / "YD"? in a circle logo (Hart Grain Weigher Co) - 5.75". Good+. (R3-104)

0210. IHC Part No. H156? embossed: INTERNATIONAL HARVESTER CO - - 7.5" oil can. Good++.

0211. J1507 - J1506 (IHC No. J1502) - - 13" ratchet, straight handle variant. No IHC logo variant. Good++. (R1-254)

0212. Lot of two: P & O / IHC Wrenches
(1.) 4359 (P & O, later IHC) - - 12.75". Some pitting. (R1-370)
(2.) 5283 (IHC logo and a "W" in a circle logo) - - 9.5". Good+. (R1-251)

0213. CHAMPION R28 (with the IHC logo) - - 8.5" Some jaw tip damage. (R1-95)

0214. 93704 PRIMER PLUG (with a "D" in a circle logo) / CYLINDER & VALVE PLUG (IHC) - - 10.5". Double open ended variant. Good+. (on Irps' IHC Tool List, R1-252)

PiCs Lots 203 thru 214

0215. CHATTANOOGA 5 (later IHC) - - 9.5". Light pitting. (R1-98)

0216. Lot of two: IHC Pitman Wrenches
(1.) J480 (Plano later IHC) - - 6.5" pitman wrench. Excellent.
(2.) J122 (IHC) - - 6.5" pitman wrench. Pitted. (R1-254)

0217. Lot of three: Champion Double Open End S-Wrenches
(1.) CHAMPION 500 - - 6.5"
(2.) CHAMPION 501 - - 7"
(3.) CHAMPION 504A - - 10.25"

0218. G8210 with IHC logo - - 6". Excellent.

0219. Lot of two: IHC Flat Steel Wrenches
(1.) Marked SA2126 (IHC) - - 7"
(2.) Unmarked (IHC SA2126) - - 7"

0220. 26494D (IHC logo) - 8" flat steel McCormick-Deering Farmall Tractor sparkplug wrench. Good++.

0221. 5082T / D with an IHC logo - - 6" double socket listed for early International Trucks and Gas Engines. Good++. (R1-251)

0222. D420 - D. M. O & CO. (D. M. Osborne & Co. - Auburn, NY, later IHC) - - 5.25". No IHC logo variation. Good++. (R1-363)

0223. 925T (IHC) - - 9". No IHC logo variation. Chip on jaw edge.

0224. MILWAUKEE / 15696 - - 15". Scarcer variation with part number. Good+. (R1-328)

0225. BUCKEYE WRENCH (markings not readable) - - 9.75" oddball. Good+ with weak markings as usual. (See Buckeye Mower & Reaper Co, Akron, Ohio - R2-44)

0226. Unmarked - - 7" bed key wrench with seven different size wrench openings and a screwdriver. Excellent. (S881).

0227. Lot of five: Unidentified Orphan Wrenches
(1.) A79 - - 6" doe.
(2.) FC with a "Z" in an oval logo - - 8.25" with small hammer head. Looks like the Brown-Manly Plow Co. No. 44 wrench.
(3.) J - 6.75" doe.
(4.) Unmarked - - 4.25" soe with open handle.
(5.) 13 - - 6" doe.

PiCs Lots 215 thru 227

0228. 112659 - USA ( USA (Oliver Crawler Tractor, identified from wrench found with original Oliver parts tag) - - 12.75" doe "S" wrench. Good++. (not in Rathbone)

0229. Lot of three: Unidentified Wrenches
(1.) 143 (orphan) - - 9". Good++.
(2.) K89? (orphan) - - 9.5". Pitted, numbers not clear.
(3.) 42 (orphan) - - 11.5" silo filler type. Tight jaw crack, not cleaned.

0230. Lot of three: Farm Wrenches
(1.) 54 (orphan) - - 8.5" Farmers S-style wrench. Excellent.
(2.) A (Minnesota Threshing Machine Co.?) - - 8.25" open end by square socket. Good++. (R2-204)
(3.) B (orphan) - - 8". Good++.

0231. Lot of three: Unidentified Wrenches
(1.) RB125 (orphan) - - 6". Looks identical to a wrench drawing in a Fairbanks-Morse Parts Lists for their Eclipse Gas Engines. Excellent.
(2.) 13 (orphan) - - 4.5" oddball with tear drop shaped cutout. (Excellent.
(3.) Unmarked (orphan) - - 6" by 9.5" oddball L-shaped with three open ends. Light pitting.

0232. Lot of three: small Unidentified Wrenches
(1.) Unmarked (orphan) - - 6.75". doe with center ridge. Good++.
(2.) Unmarked (orphan) - - 5.5" open end with two sockets and a center diamond cutout. Excellent.
(3.) Unmarked (orphan) - - 4.75" doe with hang hole. Good++.

0233. K1140 (orphan) - - 5.25" Excellent.

0234. Lot of four: Lawn Mower Wrenches
(1.) 1893 (Dille & McGuire, Richmond, Indiana) - - 3.75".
(2.) 1893 (Dille & McGuire, Richmond, Indiana) - - 3.75".
(3.) K4 (Dille & McGuire, Richmond, Indiana) - - 4.5". Small single open end with pointed end.
(4.) K4 (Dille & McGuire, Richmond, Indiana) - - 4.5". Small single open end with pointed end.

PiCs Lots 228 thru 234

Motorcycle and Automotive Wrenches, Etc. (lots 235 thru 248)

0235. INDIAN MOTOCYCLES - HENDEE MFG CO - SPRINGFIELD, MASS. USA - WAKEFIELD WRENCH WORCESTER, MASS / NO. 8 - PAT SEPT 4, 1900 - - 6.25". Indian Motorcycle wrench. Side adjust. with hollow handle. Wakefield wrench was patented by John E. Wakefield of Worcester, Mass. Good+ with some edge hammer dings. (S124) PAT.

0236. INDIAN (in script) / INDIAN (in script) (with a "M" logo) - - 7" malleable adjustable auto type wrench included in Indian Motocycle tool kits. Good++. (S125)

0237. B. F. GOODRICH CO. / WALDEN-WORCESTER - PAT. APLD FOR- - 5.25" early automotive rim bolt wrench. Loop handled with a ratcheting 5/8" female hex end. Patented July 20, 1909 by Frederick E. Walden, Worcester, Mass. Excellent. (S150) PAT

0238. B. F. GOODRICH CO. / WALDEN-WORCESTER - PAT. JULY 20, 1909 - - 5". same loop handled ratchet wrench as No. 237 above except marked with the patent date and with a 13/16" female hex instead of 5/8". Good+. PAT

0239. CADILLAC (in block letters) - - 6" double open ended wrench. Good++.

0240. 139 1/2E (IHC) - - 5" by 6.5" tee socket wrench for circa 1907 IHC auto buggies, trucks.. Good++, weak but readable markings. (R1-250)

0241. PIERCE ARROW (arrow logo) / FAIRMOUNT - - 5.25" center screw adjustable wrench. Good++.

0242. PIERCE ARROW (arrow logo) - - 7" BILLINGS Model "E" center screw adjustable wrench. Good++.

0243. SNUBBER ADJUSTER - 1 - - 11.5" odd two prong tool for adjusting shock absorbers snubbers?? Excellent with original black finish. (not listed, no info found)

0244. Lot of three: Seven Inch Ford Type Adjustable Wrenches.
(1.) SHEFFIELD ENGLAND ("SSP" in a shield logo) - MADE IN ENGLAND - - 7". Good++.
(2.) FORD (script) K.D. (King Dick?) - MADE IN ENGLAND - - 7". Excellent.
(3.) SNAIL BRAND (with a snail logo) - - 7". Excellent.

0245. FORD (script) - T2839 (with Mossberg's "M" in a diamond logo) - - 8.5" x 10" tee handled hex socket wrench for 1927 last year Model "T" wire wheel lug nuts. Good++, with some of the original plating.

0246. DMP-12 - HKP (H. K. Porter) - PORTER-FERGUSON - - 9.75" odd automobile body shop pliers for repairing the drip edge channel along the roof of old cars. Good+, not cleaned.

0247. Lot of two: H. D. Smith Perfect Handle Automotive Tools with knife type wood slab handles.
(1.) THE H. D. SMITH & CO. - MADE IN PLANTSVILLE, CONN. USA / "PERFECT HANDLE" PATENTED - - 13". Advertised for use as a tire tool or automotive pry bar. Design patent issued to by Lucius Walkley of Plantsville, CT. on July 8, 1913. Good+. PAT
(2.) PERFECT HANDLE PATENTED / THE H. D. SMITH & CO. - MADE IN PLANTSVILLE, CONN. USA - - 12.5". Listed in catalog as No. 650 "Perfect Handle" Valve Lifter. Patented by William S. Thomson of Plantsville, Conn. on Oct. 16, 1917. Some pitting, missing the hook and chain as usual. PAT

0248. Lot of seven: Automotive Tools. Including Four Ford sparkplug and cylinder head wrenches, two Maxwell No. 4 wrenches (both pitted) and a soe wrench marked VALVE TAPPET ADJUSTING NUT WRENCH.

PiCs Lots 235 thru 248

Hardware Company Wrenches - Group One (lots 249 thru 266)

See Choice Box 66 for eight hardware company six inch monkey wrenches, several more hardware company items in other box lots

0249. WINCHESTER - TRADE MARK - MADE IN USA - 1814 - - 5" double open end S-wrench. Good++, with some weak markings.

0250. WINCHESTER - TRADE MARK - MADE IN USA - 1514 - - 7" double open end S-wrench. Good+, some minor edge dings.

0251. WINCHESTER - TRADE MARK - MADE IN USA - 1522 - - 8" double open end S-wrench. Good+, some light pitting.

0252. ENDERES - PAT-JAN-11-21 - - 6.5" slip joint pliers with screwdriver handle end. Patent was granted Oct. 11, 1921 (not Jan. 11, 1921 as marked on pliers) to Joseph Anthony Schlehr of Northville, South Dakota for the wedge shaped jaw feature. Good++. PAT

0253. BAY STATE / PATENTED NOV, 13, 00, MAR. 11, 02, (Mossberg patents) - - 5" side screw adjust bicycle wrench. Bay State was a house brand for the Simmons Hardware Co. of St Louis, Missouri, more famous for their Keen Kutter brand. Patents were issued to Frank Mossberg of Attleborough, Mass. Good+. (like S105B) PAT

0254. KEEN KUTTER - (with E.C. Simmons Keen Kutter logo) - 18 / (E.C. Simmons Keen Kutter logo) - DROP FORGED - - 16" Stillson type pipe wrench, Good++.

0255. REV-O-NOC - H. S. B. & CO (Hibbard, Spencer, Bartlett & Co., Chicago) - - 10" knife type wooden handled monkey wrench. Good+, few dings.

0256. HIBBARD MADE IN USA - 12 (Hibbard, Spencer, Bartlett Hardware Co. - Chicago, Illinois) - - 10.5" wooden handled Stillson type pipe wrench, Good++.

0257. Marked only with a six pointed star logo (Worth logo - Bigelow & Douse Co. of Boston, MA.) - - 10" all metal monkey wrench with patterned handle. Good++.

0258. SHAPLEIGH'S - TRADEMARK REGISTERED IN THE U.S. PAT. OFF. - - 12" wooden handle monkey wrench. Good with some dings, grind marks.

0259. CRUSADER TRADEMARK - - 8" wooden handled monkey wrench. Winchester sold the Crusader Trademark wrenches for a very short time circa 1921 till they were replaced with the Winchester Trademark wrenches. Due to the limited time they were produced they are very seldom found, much rarer than the Winchester marked wrenches. Good+.

0260. REV-O-NOC - H. S. B. & CO (Hibbard, Spencer, Bartlett & Co., Chicago) - - 8" knife type wooden handled monkey wrench. Good++.

0261. KEEN KUTTTER logo - B. J. (E. C. Simmons' Black Jack brand) - SOLID BAR - PAT JAN. 14, 96 - - 6.5" monkey wrench with wood knife type handle. Patented by Robert Cosmos Ellrich of Southington, Conn. Good+. PAT

0262. WINCHESTER TRADE MARK NO. 1001 - - 6.5" monkey wrench with wood knife type handle. Good++.

0263. KEEN KUTTTER logo - B. J. (E. C. Simmons' Black Jack brand) - PAT JAN. 14, 96 - - 6.5 all metal monkey wrench. Good with some dings.

0264. WM ENDERS OAK LEAF - ST. LOUIS USA (in an oak leaf logo) - 8 - - 7" wooden handled Stillson type pipe wrench. Wm. Enders was an E. C. Simmons Hardware Co. brand. Excellent.

0265. WINCHESTER - TRADE MARK MADE IN USA - 1021 / PAT. 3-14-22 - - 8" wooden handled pipe wrench. Patent was issued to Guy C. Claypoole of Hamden, Conn. and assigned to the Winchester Repeating Arms Co. Excellent. PAT

0266. KEEN KUTTER (with Keen Kutter logo) - 6 / DROP FORGED - - 6" all metal Stillson type pipe wrench. Good++.

PiCs Lots 249 thru 266

Fence Tops (lots 267 thru 272)

Fence tops are shown in The Fencin' Tool Bible by Bill Marqus. Most of these are not in the book

0267. Lot of five: Cast iron fence tops. Nos. 3 and 4 are marked H. L. JUDD CO. INC. - 15314 - - 4" to 5.75". Will be sold choice item.

0268. Lot of five: Fence tops. Nos. 1, 2, 4 are cast iron. Nos. 3 and 5 are cast aluminum. No. 4 is marked PAT. PEND / 122 - - 3.75" to 6". Will be sold choice item.

0269. Lot of seven: Similar cast iron fence tops. No. 1 has a slightly different base. - - 3.75". Will be sold choice item.

0270. Lot of four: Four fence tops. The leaf pattern (No. 1) is cast iron, the other three are cast aluminum. The short dome type (no, 4) is marked ELCAR FENCE. - - 4.5" to 12". Will be sold choice item.

0271. Lot of four: Two pair of cast iron spear type fence tops. The fancy pair (Nos. 3 and 4) have male screw threads. - - 11.5" and 13". Will be sold choice item.

0272. Heavy cast iron bird cage type fence top. - - 17".

PiCs Lots 267 thru 272

Combination Tools (Including Several Fencing Tools) - Group One (lots 273 thru 304)

0273. EDWIN LOUDERBACK & CO PHILADELPHIA, PA PATD MAY 1, 1883 / WARRANTED CAST STEEL - - 11" combination. tool with at least 10 functions including several plier type tools, punch, hammer, cutter, vise, screwdriver, etc. Patented by Robert Erdman & William Phillips of Philadelphia, PA. Condition is Good++, complete with the screwdriver bit attachment. (Smith No. 82, S817, C204) PAT

0274. RANCHMAN / FORGED TOOL STEEL - - 12.25" hatchet comb. tool with hammer, pincers, nail claw, screwdriver and leather punch. John Morris Pat of July 19, 1898 probably applies. Good+ with some light pitting. (Smith No, 12, S802) PAT

0275. NEVER-STALL - MATHEWS - DAYTON, OHIO / PATENTED - DROP FORGED STEEL - - 10.25" combination. tool with adjustable wrench, pliers, screwdriver, nail claw, hammer head, Etc. Set screw in upper jaw variation, Patented by Frank J. Stolle of Fort Thomas, Kentucky on Sep. 14, 1909. Made at various times by Mathews, Forshee Mfg, and Thomas Mfg. Co. all of Dayton, Ohio. Good+ with some dings, replaced jaw set screw. (Smith No. 81, S818, C213) PAT

0276. NEVER-STALL - MATHEWS - DAYTON, OHIO / PATENTED - DROP FORGED STEEL- - 10.25" combination. tool with adjustable wrench, pliers, screwdriver, nail claw, hammer head, Etc. Set screw in upper jaw variation, Like No. 275 above. Good++, missing the jaw set screw. (Smith No. 81, S818, C213) PAT

0277. NEVER-STALL - PATENTED /- DROP FORGED STEEL - - 10.5" combination tool with adjustable wrench, pliers, screwdriver, nail claw, hammer head, Etc. Like Nos. 275 and 276 above except no threaded hole for a set screw in upper jaw and slightly different markings. Good++, (Smith No. 81, S818, C213) PAT

0278. THOMAS M'FG. CO. - DAYTON, OHIO / GUARANTEED FORGED STEEL - - 11.5" comb. fencing tool including hatchet, hammer, alligator wrench, pliers, screwdriver, etc. Good+. (Smith No. 7, S801)

0279. FARMER'S EVER READY TOOLKIT / DROP FORGED STEEL - - 11.5" combination fencing tool with a hatchet, hammer, alligator wrench, pliers, screwdriver and more. Pitted. (Smith No. 20, S803)

0280. RED DEVIL - S & H CO. USA. (Smith & Hemenway Co.) - No. 1906 - - 10.25" standard type fencing pliers that King Herington apparently modified by adding a hammer head and nail claw.

0281. Unmarked - - 10". King Herrington added a hammer head and nail claw to this fencing type pliers.

0282. Marked only JAN. 04, 1898 (weak markings, not all readable) - - 10.5" different style fencing pliers with a nail claw. Patent was issued to Mortimer Cahill of Lawrence, KS. Good+. PAT

0283. Unmarked - - 10" combination pliers with hammer head, nail claw, wire cutters, etc. Smith describes as "Combination Tool, Modern, Made in China" This one not marked "China". Good++. (Smith No. 16)

0284. Unmarked - - 6.5". Handy Boy type pliers and Crescent type wrench to which Mr. Herrington added a hammer head and nail claw.

PiCs Lots 273 thru 284

0285. HANDY I.C.I. - NO 3 / I.C.I. - PAT PEND - - 9.5" malleable cast iron combination tool with two pliers, screwdriver, wrenches, hammer, nail claw, ruler, etc. Good++. (S813)

0286. Unmarked - - 7.5" household combination tool with pliers, wire cutter, hammer, bottle opener, screwdriver, tack claw, etc. Excellent with plated finish.

0287. Unmarked - - 8.75" combination pliers with hammer, screwdriver, knife type blade, etc. Flat nose pliers have a slot inside one jaw that fits a wedged shaped extension in the other jaw, there are serrations inside the curved handles. (not listed, no info found)

0288. WAKEFIELD / PATENTS PENDING - 1-1/16 - - 10.5" combination screwdriver with several sizes of wrench openings in handle (1-1/16" and smaller). Advertised in 1921 by Wakefield as the "Wizard Screw Driver Wrench". First one I have seen. Good++. (not listed)

0289. Unmarked - - 9.25" odd combination pliers with open end wrench on end. Flat jaws have a slot on inside of each jaw. Excellent. (not listed, no info found)

0290. Unmarked - - 9" gas pipe type pliers with a cone shaped end on one handle and a screwdriver end on the other handle. Good+. (not listed, no info found)

0291. CRESCENT TOOL CO. JAMESTOWN, NY / 4 IN. PATENTED - - 7.75" Crescent's combination folding handle screwdriver and hammer tool. Patented Feb. 6, 1917 by John Emil Johnson of Jamestown, NY. 6" is Good++. 4" is Good++. (Hammer Book 104-1) PAT

0292. Marked only JAPAN - - 5.5" heavy cast odd combination pliers tool with a hex, round and Keystone shaped openings. Excellent, plated finish. (not listed, no info found)

0293. Unmarked - - 4.75" Boardman combination tool with a center screw adjust nut wrench, pipe and spoke wrench, hammer, nail claw, screwdriver, square socket and tool bit holder (in end of handle. Patented May 30, 1865 by A. W. Park and July 10, 1866 by Bryon Boardman (both of Norwich, Conn.). Manufactured by the B. Boardman & CO. and later by Tower & Lyon. Good with pitting. (S788, C72, Hammer Book 103-9) PAT and PAT

0294. THE COULTER TOOL CO. SAN ANTONIA, TEXAS / MADE BY STRIEBY & FOOTE CO. - NEWARK, NJ - PAT. SEPT. 19, 1904 - - 18" combination plier type tool with wire cutter, wire twister, wire stretcher, etc. Patented by Newton J. Tate of Weatherford, Texas. Good++ with the often missing, S-hook and leather punch. (Smith 134) PAT.

0295. BERNARD'S - OTHER PAT. PENDING / W. SCHOLLHORN CO. NEW HAVEN, CONN - - 8.5" combination pliers, hammer, nipper, etc. Good++. (couldn't find in Smith's book)

0296. Lot of two:
(1.) CRESCENT TOOL CO. JAMESTOWN, NY (weak markings, not all readable) - - 10" combination fencing pliers tool, double hammer heads with grooved faces. Good++.
(2.) B. C. F. T. CO. - - 11" different fencing tool combination pliers with a screwdriver on the end of one handle and instead of two hammer heads or a hammer head and staple puller this one has a hammer head and odd cross peen head. Good++. (Looks like Smith No. 36)

0297. Utica Drop Forged &. Tool Co. with three diamond logo - - 9.5" double hammer combination fencing tool pliers with with four holes in handled for twisting wires. Good+. (Smith No.44)

0298. Unmarked - - 8" combination pliers, alligator wrench with two wire cutters. One handle has a sliding collar that slides down and converts the pliers into an adjustable alligator wrench. Identified from an 1907 catalog listing as "Mason's Combined Plier and Wrench" Good+ with minor dings, decent plating. (not listed, see MVNL Dec 1998 pg 5) Catalog Listing Ad.

0299. Unmarked - - 9.75" Kitselman combination wire tool, hammer, staple puller, and wire twister plier type tool. Complete with rare splicing tool. First one I have seen with the splicing tool. Good+. (Smith No. 84)

0300. UTILAX / PAT. APP. FOR ESTWING MFG. CO. ROCKFORD ILL. USA - - 13.5" early Estwing combination hatchet, hammer, pick with nail claws on end of the wooden clad handle. Patented Mar. 30, 1926 by Ernest O. Estwing of Rockford, Illinois. Good++. (Smith No. 183) PAT

0301. Unmarked - - 11.5" hamer and spring loaded staple setter. Good++. (Smith No. 182)

0302. PAT NOV 20, 94 - - 9.75" cast iron combination hammer with a staple puller claw, nail-pulling slot, wire splicing handle end, and wrench with multiple sizes under the staple claw. Patented by John H. Hebblethwaite of Rock Falls, Illinois and advertised as the Everlast. Good++. (Smith No. 178, S795) PAT

0303. SECURITY (in script on both sides) - - 9.75" malleable hammer with nail or tack puller claw. Good+ with some light pitting.

0304. JACOBS / PAT. 1966298 - - 12" combination claw hammer, splicing tool and staple puller. Patented July 10, 1934 by Nicholas M. Jacobs of Harlan, Iowa. Good with old weld repair. (Smith No. 177) PAT

PiCs Lots 285 thru 304

Adjustable Wrenches Including Several Oddball Pliers - Group Three (lots 305 thru 335 )

0305. KANT-SLIP - PAT APR. 27, 1920 - AUG 2, 1921 - OTHER PATS. PENDING - / A.D. WRENCH. & TOOL CO (Allan-Diffenbaugh Wrench & Tool Co.) - BARABOO, WIS - - 9.5" plier wrench with a hammer poll. Patented by Allen C. Allan of Baraboo, Wisc. Excellent,. (S356) PAT.

0306. "KANT SLIP" / A.D. WRENCH. & TOOL CO (Allan-Diffenbaugh Wrench & Tool Co.) - BARABOO, WIS - PATENT PENDING - - 8" adjustable plier wrench, completely different design than No. 305 above. Patented Apr. 27, 1920 and Apr. 22, 1924 by Allen C. Allan of Baraboo, Wisc. Good++. (not in Schulz) PAT.

0307. KANT SLIP - MADE IN USA" / KANT SLIP - P & T CO. CHICAGO, ILL - PAT. NO. 1,337,986, 1,386,149, and 1,490,902. - - 8" unique designed pliers with a pivoting cam that is was so innovative that it took three patents to cover it, none of which mentions the cam mechanism but apply to the Kant Slip pliers made in Baraboo, Wis. No information on this company found. Scarce. Good++. (S252) PAT.

0308. BERNARD'S Pat. Aug. 7, 1917 / NO. 92-6 - W. SCHOLLHORN CO. NEW HAVEN, CONN. MADE IN USA - - 6.5" slip joint pliers with a tapered jaw and flush pivot pin. Not Bernard's usual sheet metal construction but a high quality forged tool with plated finish. Patent was issued to William A. Bernard of New Haven, Conn. Good++. PAT.

0309. SHARK PAT. 7-20-09 / WAKEFIELD MFG. CO. - WAKEFIELD, NEB. - - 7". shark nosed slip joint pliers. Patented by Anton G. Carlson of Sholes, Neb. Excellent. (S259) PAT.

0310. R. CALUWEARTS CO. INC. NY - MADE IN GERMANY / ADACK - PATENT APPLIED FOR - - 9.5" adjustable pliers with an unusual half moon adjusting piece. Good++. (not listed, no info found)

0311. Lot of two:
(1.) PROTO 234 - LOS ANGELES - MFD. USA - PAT. NO. 2600512 - - 7.75" different tongue and grove pliers. Patented by Homer A. Mead of Turlock, California. Good++. (see S234) PAT
(2.) Unmarked - - 7.75" slip joint pliers like No. 1 above. Excellent.

0312. Lot of two:
(1.) WADE WRENCH CO. - WHITE PIGEON, MICH. (with a "F" in a circle logo) / DROP FORGED - PAT'D - - 8.25" split handle plier wrench. Pat. Nov. 8, 1927 by William White and July 24, 1928 by Benjamin Wade both of White Pigeon, Mich. Good++. (S257) PAT. and PAT.
(2.) PAZZANO / PAT. NO. 19027 - MADE IN USA - - 8.25" battery pliers. Patented by Frederick F. Pazzano of Waltham, Mass. on Feb. 21, 1933 and reissued on Dec. 19, 1933. Good++. PAT

0313. CLICK PLIERS - CLICK MFG CO FAIRBURY, NEBRASKA USA / MFG UNDER THE FOLLOWING PATS. 2358858, 2,325,245 - - 9" with a u-shaped clip to set the lower jaw to different positions. Patented Jul. 27, 1943 and Sep. 26, 1944 by Joel Hahn of Beatrice, Neb. Excellent with plated finish. (S260) PAT.

0314. SUPER GRIP TOOL CO IOWA - PAT 1-16-33 - - 8" pliers with a geared cam mechanism. Patent was granted on June 27, 1933 (not Jan 16, 1933 as marked on the pliers) to Gilbey M. Clifton of Perry, Iowa. Good+ with minor peen marks. (S245) PAT.

0315. PADEN MFG. CO. - OMAHA, NEBR. - - 7.5" locking pliers with a quick adjust sliding lower jaw. Patented by Dale D. Paden, Omaha, Nebraska on Sept. 22, 1959. Not marked with the patent number variation. Good++. (S270) PAT.

0316. Lot of two:
(1.) MODEL 10 - REINHARD MCCABE CO. - MINNEAPOLIS, MINN - PAT. PEND - - 10" quick adjust plier wrench. Excellent. (S713, patent not found)
(2.) LIGHTNING WRENCH MADE BY HAMPTON MACHINE & TOOL CO. - - 9.5" adjustable pliers type wrench with screwdriver on end. Excellent with some weak markings, plated finish. (S690)

0317. Lot of five: Plier Type Wrenches
(1.) Unmarked - - 7.5" reversible double jaw pliers and nippers. Pitted, replaced pivot bolt nut.
(2.) Unmarked - - 7.25" pliers with hammer head. Light pitting.
(3.) McKAIG- HATCH INC. BUFFALO N.Y. - - 7" pliers with small hammer head. Pitted.
(4.) ACIER FOI.C? - - 6" pliers with sliding collar over the handles. Good+, some weak markings.
(5.) NO. 7 - BMC MFG. CORP. - BINGHAMTON, NY - PATENT NO. 2388580 - - 7" Locking Pliers. Patented Feb. 19, 1946 by Francis A. Snell of Chenango Forks, NY. Excellent. (S278) PAT.

PiCs Lots 305 thru 317

0318. PAT SEPT 20, 1921 - HANDEHAND - TRADEMARK - MFD. BY H & E WRENCH CO. NEW BEDFORD, MASS.- - 10.25" helical screw quick adjust nut wrench. Patentees were Edwin J. Evans and George E. Hemphill both of Salt Lake City, Utah. Excellent. (S496). PAT.

0319. PAT SEPT 20, 1921 - HANDEHAND - TRADEMARK - MFD. BY H & E WRENCH CO. NEW BEDFORD, MASS.- - 10.25" helical screw quick adjust nut wrench. This is the rare version with jaws for hex wrenches. Patent info same as No. 318 above. Excellent. (S496). PAT.

0320. Unmarked (Girard Wrench Mfg Co of Girard, PA) - - 10" all metal, malleable screw adjust nut wrench made with only three pieces. Patented by C. H. Miller of Erie, PA on July 11, 1882. Overall pitting. PAT

0321. P. S. & W. CO. (Peck Stow & Wilcox) - - 11" neat oddball malleable iron pliers type tool for sheet metal work? Excellent. (not listed, no info found)

0322. ARL BLUMBACH (Carl Blumback) - GERMANY - 8 - - 8.75" unusual foot print type pliers with an automotive wrench type rack and worm adjustment and a pivoting lower jaws insert. First one I have seen. Good++.

0323. 8 IN. SHUSTER SPEEDWRENCH - PATD FEB 2, 1915 / CLIP BAR MFG CO. - PHILADELPHIA, PA. USA (etc.) - - 8" Crescent type with a lever that when released enables a ratcheting action. Patented by Myer Shuster, Philadelphia, PA. Good Plus. (S530) PAT.

0324. Unmarked - - 10" center screw adjust wood handled nut wrench with an unusual lower jaw assembly that completely surrounds the threaded shaft. Rare wrench . The few that have been seen were not marked. Minor dents and dings, crack on the lower jaw assembly. (not listed, no info found)

0325. Unmarked - - 10" wood handled nut wrench with center nut and shaft threaded on edges only. Advertised as Taft's Railroad and Mowing Machine Wrench by George C. Taft and later mfg. by L and A. G. Coes and A. G. Coes & Co. Some minor nicks and dents, excellent replaced handle. (HP9, HP13, S418, S848 )

0326. STANDARD TOOL CO. - ATHOL, MASS USA - - 10.25" wooden handled screw and quick adjust nut wrench with a spring loaded bar that releases the lower jaw from the screw threads. Patented by Stephen Bellows of Athol, Mass. on June 8, 1889. Advertised as the "Rapid Transit Wrench" Much scarcer than the all metal version. Good+ with minor dings, tight short handle crack, stamped former owner's name ("C.G. Young"). (S526, C46) PAT

0327. PATENTED JUNE 16, 85 - - 10" Coes type monkey wrench with the adjusting screw supporting ferrule. Patented by Squire Robinson of Southington, Conn. Some minor dings and tight handle crack. (S413) PAT.

0328. PAT SEP 7, 97 / 31 - - 7.5" wood handle version of the Vandegrift patent monkey wrench. Some minor pitting, small handle chip. (S966, C313) PAT.

0329. CRANDALL EXPERT / PATENT APPLED FOR - - 8" adjustable angle pivoting head open end wrench with interchangeable jaw segments (three different size jaws included). Patent was granted to Max E. Crandall of Fairfax, Oklahoma on May 13, 1913. The Expert Utility Co. of Cincinnati, Ohio was the manufacturer. Excellent. (S315) PAT

0330. BOSTON WRENCH CO BOSTON, MASS. - PAT'D OCT 2, 1906 OTHER PAT. PENDING - - 8.5" all metal quick adjust rack wrench with a sliding lever that locks the lower jaw in position. Pat by Alphage Gagnon of Springfield, Mass. Good+. (S480) PAT

0331. THE ANDERSON / PAT-6-23-14 - - 6.5" Crescent type with a locking adjustable angle head. Rare small size. Patented by Anton E. Anderson, Frank L. Bailey and William C. Cummings all of Okmulgee, OK. Mfg. by the Anderson-Bailey-Cummings Co. of Okmulgee, OK. Excellent with a weak or missing spring. (S311, C41)) PAT.

0332. 8 IN NUT GEARENCH (sic) TRADE MARK - FORGED STEEL - PATENTED 6-2-26 / GEARENCH MFG CO. - HOUSTON TEXAS - - 8.25" quick adjust wrench patented by Joseph Peterson of College Station, Texas. Different markings than normally found. Although this wrench has serrated teeth and it is listed in Schulz under Quick Adjust Pipe Wrenches, it is marked "nut wrench" and it probably won't work on pipe, but it does work on a hex or square nuts. Excellent. (S671) PAT.

0333. GORDON AUTOMATIC PATENT APPLIED FOR (same markings both sides) - - 6" curved handle Crescent type with an attachment to the adjusting gear that releases the moveable jaw. Patented Jul. 22, 1924 by William Gordon of Union, New Jersey. Scarce small size. Good++. (S492) PAT.

0334. VICTOR TRADEMARK / PAT. DEC 23, 1902 - PAT. AUG 25, 1903 - - 6.5" quick adjust wrench made by the Bonner Mfg. Co. of Chrisman, ILL. and patented by Clarence E. Bonner, Cherrypoint, IL. Scarce small size. Good++, stamped with former owners name ("M. Farrar"). (S653) PAT.

0335. "VICTOR" TRADEMARK / PAT. DEC 23, 1902 - PAT. AUG 25, 1903 - - 8" quick adjust wrench made by the Bonner Mfg. Co. of Chrisman, ILL See Lot 333 above for patent info. Good+ with small jaw edge chip. (S653) PAT.

PiCs Lots 318 thru 335

Buggy and Wagon Wrenches (lots 336 thru 353)

0336. Unmarked - - 9" oddball buggy combination wrench with a hammer and nail claw? Excellent. (not listed, no info found)

0337. Marked only "2248" - -9.75" oddball buggy type with hex box end and a forked claw end. Pitting. (not listed, no info found)

0338. Marked only "2167" - - 8.5" similar to Lot 337 above but shorter and with rounded peg like ends instead of claw ends. Some pitting. (not listed, no info found)

0339. Unmarked - - 9.5" real oddball with buggy type openings on one end and a hammer and hooked extension on the other. Good++. (not listed, no info found)

0340. MOYER / 224 (H. A. Moyer - Syracuse, New York) - - 8". buggy wrench. Excellent with most of the original black finish. (R1-342)

0341. HARTFORD SPRING & AXLE CO (Dunkirk, NY) - 7/8 - - 9" buggy wrench. Good++. (R1-224)

0342. HARTFORD SPRING & AXLE CO (Dunkirk, NY) - 1-1/8 - - 9.25" buggy wrench. Good++. (R1-224)

0343. ANCHOR BRAND - 11 (Anchor Buggy Co. - Cincinnati, Ohio) - - 10" buggy wrench. Good+. (R1-19)

0344. BALTIMORE, MD. - PAT MAY 2 1893 - Z B logo - 1 / (Zook-Byler) / USE MD. FERTILIZNG CO. STD. FERTZ. - - 8.5". Rare unlisted imprint on a Zook-Byler patented buggy wrench. First one I have seen. Patent for the wrench was granted to James K. Byler and Henry S. Zook both from Morgantown, Penn. Excellent. (not in Rathbone) PAT

0345. Lot of two:
(1.) 1858 / D (orphan) - -10.5" buggy wrench. Light pitting or casting roughness. (not listed, no info found)
(2.) DAYTON / 1 - 2813C PATENTED (with Dayton Malleable Iron Company's - Dayton "D" in a circle logo) - - 7.75" buggy wrench. Patent was granted to Horace E. Morrill of Dayton, Ohio on April 23, 1907. Jaw corner crack. (R1-127) PAT

0346. KAUFMAN - 1-1/16 (Kaufman Buggy Co. - Miamisburg, Ohio) - - 8.5" buggy wrench. Overall light pitting, casting flaw. (R1-276)

0347. 7320K? with Eberhard's "E" in a circle logo - - 9" typical buggy wrench style. At first I thought it was brass but it is magnetic. Doesn't seem to be painted, brass plated? Slight bend, casting flaws.

PiCs Lots 336 thru 347

0348. LAWRENCE-CLARK CO. / PAT. 1920 - SPRINGFGIELD, MASS - - 10.75" Adjustable wrench with a pry bar end. Excellent. (not listed, no info found)

0349. G. A. HOSMER & CO - BUFFALO NY - PAT APLD FOR - - 7.5" combination plier type buggy wrench with four open end wrenches. Canadian patent was issued to Giles Arnel Hosmer of Buffalo, NY on Nov. 06, 1894. Good++. (S198) PAT

0350. AMERICAN WRENCH - PAT. SEPT. 8, 1885 - AUGUSTA, MAINE - - 10" ribbed wooden handled screw adjust carriage wrench, single jaw variant. Patented by Bradford Lancaster (Augusta, Maine). Good++. (S231, C40, C50) PAT

0351. DIAMOND WRENCH MFG. CO. - STEEL FORGED - PORTLAND, ME / PATD NOV 2, '80 - OCT 16, '83 - - 10.5". A large wing nut on a threaded shaft adjusts the double headed wooden handled wrench (one with regular nut wrench jaws and the other for buggy or wagon nuts). Patented by H. A. Thompson of Farmington, Maine. Some weak markings, not all readable, tight crack. (S208) PAT

0352. PAT NOV 2, 80 - - 15" wood handled screw adjust buggy wrench.Single jaw version. Patented by H. A. Thompson of Farmington, Maine and mfg. by the Diamond Wrench Co of Portland, Maine. Good++. (S204) PAT.

0353. PAT NOV 2, 80 - - 12" wood handled screw adjust buggy wrench. Double jaw version. Same patent info and manufacturer same as single jaw version No. 353 above. Good++ PAT.

Rare Hammers, Nail Pullers and Combination Tools (lots 354 thru 424)

0354. Unmarked - -14" early combination hammer, adze and nail puller with metal straps to secure the handle. Good+. Handle looks original. (no info found)

0355. Marked only PAT PEND in a diamond logo - 16 - - 14" double claw hammer. Excellent. (looks like Hammer Book 7-5, patent not found)

0356. Unmarked - - 13.25" double claw hammer with two part head. Patented by George F. Voight of San Francisco, Calif. on Nov. 04, 1902.. Good++, handle may be a replacement. PAT.

0357. Unmarked - - 13" odd hammer with a nail claw on top, a curved extension with a small hole on the end and a long sleeve that attaches the handle to the head. Good++ with excellent original handle. (not listed?, no info found)

0358. Unmarked - - 16" claw hammer with a nail holder on one side of the head. Looks like George H. Mills' and Jackson M. Hanscom's (both of Boston, Mass) patent issued July 15, 1862 Good with some dings, replaced handle. (see Hammer Book 14-2) PAT.

PiCs Lots 348 thru 358

0359. "UNIVERSAL" NAIL PULLER - WARRANTED - ALL PARTS INTERCHANEALE - PAT. MAY 24, 1904 / LANDERS, FRARY & CLARK - NEW BRITAIN, CONN. USA - UNIVERSAL NO. 1 - -16" nail puller with malleable cast iron sliding driving handle. Patent was granted to George Walker of New Britain, Conn. Listed as hardly ever found in Ray Fredrich's nail puller's book. Excellent. PAT.

0360. Lot of three:
(1.) Marked only SERVICE (on the handle) - - 13.5" claw hammer with nail holder under claw. Good+. (no info found)
(2.) SERVICE (on the handle) - - 13.5" claw hammer with nail holder. Good, hammer face is mushroomed. (no info found)
(3.) HOWITZER / PAT. PEND - - 17.75" circa 1983 fiber glass handled claw hammer with unique designed head with three nail holders on top Good++. (patent not found)

0361. THAYER'S PAT JUNE 24, 62 - - 10.25" early combination tack hammer with a rule, screwdriver, tack and nail claws. Patented by John Adams Thayer of East Boston, Mass. Good++ except the wooden handle is split the length of the handle. (Hammer Book 32-6) PAT.

0362. WILLIAMS NAIL HOLDER & GUIDE / PATENT 1688445 - - 6.5" odd malleable cast tool. Patented Oct. 23, 1928 by Isaac N. Williams of Foltz, Indiana. Excellent, painted. PAT.

0363. A. R. ROBINSON - BOSTON. MASS. - PAT. NOV. 2, 86 - - 18.5" bill poster's hammer with magnetic tack holder head. Patent was issued to Arthur R. Robertson of Somerville, Mass. Good++ with most of the original plating, small areas of corrosion, handle extension is missing, (Hammer Book 108-1) PAT.

0364. Lot of two:
(1.) GENUINE PLUMB / BOY SCOUTS OF AMERICA logo (on head) - OFFICIAL SCOUT AXE (on handle) - - 12.75" hatchet and hammer. Good+ with former owner's name carved on handle ("Bill J.")
(2.) GENUINE PLUMB - BOY SCOUTS OF AMERICA logo - - 14.75" hatchet with hammer head and nail puller. Good with some grind marks, drilled hang hole in handle.

0365. PEARSON'S NAILER / PAT. JAN 26, 92 - - 12.5" cast malleable iron and sheet metal construction. Nails are placed in the hopper and plunger struck with a hammer, saved numerous finger nails, Patent was issued to Martin Pearson of Robbinsdale, Minnesota. Good++. PAT.

PiCs Lots 359 thru 365

0366. HERKULES PATENT - - 9.75" comb. tool advertised as "The Hercules Combination Tool" with 40 functions, including hammer, hatchet, numerous wrenches, cutters, screwdriver, file, saw, threading dies, two rulers, etc, etc. (must be a nut cracker in there somewhere). The King of Worthless Tools but a Great Collectable Tool. This example is in far better condition of any of the few I have seen. Looks unused with all of the original nickel plating. (patent not found)

0367. Unmarked - - 10" malleable combination hammer, tack puller, tongs or pliers, screwdriver, pry bar and an unidentified curved extension on top of the hammer. Good++. (not listed, no info found)

0368. E. RIPLEY'S PATENT - APRIL 7, 1857 (same markings on both side) - - 13" malleable iron combination hammer, screwdriver, and rack type quick adjust wrench. An early pre Civil war patented combination tool Excellent, with weak markings. (S824) PAT

0369. Unmarked - - 11" tack hammer with tack claw and a wood knife type slab handle. Excellent.

0370. PAT OCT. 04, 87 - - 8.5" malleable combination hammer, tack puller, pliers, and tongs, Patented by Jacob Souders of Greentown, Ohio. Excellent. (Hammer Book 35-10)

0371. EFFICIENCY TOOL CO. - - EFFICIENCY - PAT. APPL'D FOR - - 8" combo pliers, the two halves come apart to use the two open end wrenches on the ends. Patented by Anton Myer of Milwaukee, Wisc. on 1-16-1923. Advertised as a "Five-in-One-Tool. Good++. (S283, C127) PAT.

0372. Marked only FOREIGN - -7,75" combination diagonal cutting pliers with two small hammer heads, jar and bottle openers, etc. Good+. (not listed, no info found)

0373. Unmarked - - 9.75" malleable hammer, pick, screwdriver and six wrench openings, This looks like the snow knocker hammer shown on page 97 of the Hammer Book except that one has a open loop type handle without the wrench cutouts. Excellent.

0374. BELL SYSTEM / MADE IN USA - - 16.5" combination hatchet, hammer and lag bolt wrench. Excellent.

0375. Unmarked - - 13" all metal odd combination tools with a hatchet, hammer, nail pullers, wrenches, screwdriver, etc. Good++. (not listed, no info found)

0376. PAT MAY 16, 1871 / WARRANTED MALLEABLE IRON - - 8.25" combination plier type tool consisting of two open end wrenches, cutter, nippers, etc. Patented by George Capewell of Cheshire Conn. Mr. Capewell later founded the Capewell Horse Shoe Nail Company. Good++ with one cutter blade insert chipped, screwdriver end broken off. (S811) PAT

0377. F. EDW, SNYDER (can't read all the markings) MASS'LLON - STYLE H - - 7" odd pliers type combination tool with wire cutter, screwdriver and two specialty jaws for installing wire loop hose clamps. Patented April 17, 1894 by Frank Edward Snyder of Massillon, Ohio. Excellent. (S245) PAT

0378. J. H. WAGONER / IT'S PIPE TOBACCO - - 4" miniature advertising cigar box opener. Small chip on pry bar end, plating i worn.

0379. G. J. CAPEWELL CHESHIRE, CT. / PAT, NOV 25, 1873 - - 3.25" head only, handle is missing for George J. Capewell patented tack hammer and puller. Excellent. (Hammer Book 33-12)

0380. Lot of two: Malleable Iron Household Combination Tools
(1.) THE WOODWARD TOOL - PAT. AUG. 24, 75 - - 5.5" malleable cast household combination tool. Frank R. Woodward's (of Hill, NH) patent was for a rotary paper cutter but this do every thing tool has a hammer, cork screw, can opener, glass cutter, knife sharpener, etc. Excellent. Even has the knife sharpener part which is usually missing. PAT.
(2.) MARVEL PAT. - - 7.75" malleable iron household combination tool with a hammer, tack claw, glass cutter, knife sharpener, can openers, etc, Excellent, looks like a cork screw may be missing, (patent not found)

0381. Unmarked - - 7.5" malleable iron household combination tool. Looks like a variation of Martin Young's (New York, NY) May 30, 1876 patent which describes the tool as "a combination implement for domestic purposes, in which are combined a carpet-stretcher, a tack-holder and extractor, a stove-lid lifter, a hammer, a kettle-lifter, and pan-lifter." Excellent. (see The Hammer Book 105-8)

0382. Unmarked - - 8" malleable iron fancy combination hammer, hatchet, wrench, screwdriver, tack puller. Excellent, (Hammer book 102-4)

PiCs Lots 366 thru 382

0383. Marked only IMP - - 9.75" Heaton's Improved Combination Tool manufactured by David Heaton of Providence, Rhode Island. Patents were granted on Nov. 12, 1872 to Heaton and on May 09, 1871 to Thomas Garrick, also of Providence. According to the patent the tool has the following functions: A hammer, nail puller, cover-lifter, scraper, pair of pinchers, which also form an adjustable wrench, gas-burner tongs, nut-cracker and cork-presser, six-inch rule, screwdriver, box opener and a carpet-stretcher. Good++. (S799) PAT. and PAT.

0384. FULTON UTILITY - - 12.5" wooden handled claw hammer with a nail puller, staple puller and notches under the claw to be used as a alligator type nut wrench. Patented by John Hebblethwaite of Rock Falls, Illinois on Sep. 11, 1888. Advertised in the 1915 Sears & Roebuck catalog as the Fulton Utility Hammer. I think this is the first one I have seen with the Fulton Utility markings, Good+, some pitting, replacement handle. (S796) PAT

0385. MEPHISTO - - 13" hammer and adze with nail puller. Patented by Andrew C. Benson of Beaumont, Texas on Nov. 25, 1924 and made by the H. Cheney Hammer Co. of Little Falls, NY. Good++, handle looks original. (Hammer Book 11-3) PAT

0386. Marked only PAT'D - - 13" strange claw hammer with steel head with odd claw and a hollow brass handle with slots in the end, Good++. (not listed, no info found)

0387. VULCAN AUTO TOOL - PATENT PENDG / J H WILLIAMS & CO - BROOKLYN, NY USA - - 7.5" combination tool with at least twelve functions including: a hammer, alligator wrench, screwdriver, bottle opener, etc. Good+. (S66, C337)

0388. Unmarked - - 12" combination hammer, wrench, nail claw, barrel opener, and pry bar/screwdriver. Patented by William H. Carr of Minneapolis, Minn. Sep. 28, 1909. Some chips on hammer head edges, painted. (Hammer Book 30-5) PAT

0389. C. S. OSBORNE & CO - - 6" folding pocket hoof pick and hammer. Patented April 5, 1870 by Robert Stout of Matteawan, NY. Excellent with original nickel plating. (Hammer Book 117-6). PAT

0390. PAT MAY 30, 65 - JULY 10, 66 - - 6" Boardman combination tool. Fair with pitting, chip off jaw edge. (S788, C72, Hammer Book 103-5) PAT and PAT

0391. Unmarked - - 9" heavy cast brass fireman's tool with hammer, pentagon shaped hydrant wrench, and a hose coupling wrench. Excellent.

0392. CRESCENT TOOL CO. JAMESTOWN, NY / 4 IN. PATENTED - - 7.75" combination folding handle screwdriver and hammer tool. Patented Feb. 6, 1917 by John Emil Johnson of Jamestown, NY. 6" is Good++. 4" is Good+ with some pitting. (Hammer Book 104-1) PAT

0393. SOLINGEIL - LAURUS and a flower in a pot? in a triangle logo - - 6.75" hollow handle tool holder with hammer and hatchet head plus 6 other tools in handle. Excellent, like new with nickel finish.

0394. UTILEX - 641535 (in a shield logo) - PAT NO 579210 - REG DES 841889 - BRITISH MADE - - 9." Crescent type wrench with hammer, screwdriver, nail puller, ruler and file. An American patent was issued to Bernard Forster of Manchester, England on Oct 31,1950. Good+. (S752) PAT

0395. Lot of three: All metal hammers - - 7" to 8.5". One has a nail claw end and the other two have brass hollow handles with small screwdrivers inside. Good++, except one is pitted.

0396. Lot of three: Box or Crate Tools
(1.) Unmarked - - 6.5" box or crate tool with double hammer heads. Excellent. (like Hammer Book 28-7)
(2.) HARROLD - - 9" box or crate opener tool. Good+. (not listed, no info found).
(3.) THE CUSHMAN CO. INC.- CHAMPAIGN ILL / MADE IN USA - CRAFTSMAN STEEL TOOLS - - 8.5" box or crate opener with double hammer heads. I suppose this is the company Sears bought to get the Craftsman name, Good+ with minor dings on pry bar end. (Hammer Book 27-10)

PiCs Lots 383 thru 396

0397. MORRIS WRENCH PAT'D / DROP FORGED TOOL STEEL - - 15.75" extra large combination tool with pliers, screw adjust nut wrench, alligator wrench, bolt threading dies, and a screwdriver One of the all time classics of wrench collectingdom. Patented by John R. Morris of Jewell City, Kansas on Mar. 07, 1911. Good++. (S820) PAT.

0398. Marked only PATENT APP' FOR - MADE IN USA / FORGED TOOL STEEL - - 9" Coes type screw adjust nut wrench with an alligator wrench on the end (solid shaft variant. Probably the oldest version of John Morris' Economy Wrench patented Aug. 04, 1908. Good++ except for a large chip on the corner of the upper jaw. (S40) PAT.

0399. THE - TEDDY / FORGED - STEEL - INDEP - MO. - MADE U.S.A - - 9" John Morris' combination alligator wrench, hammer and screwdriver. Excellent with "The-Teddy" in extra large, bold markings. (like S40 but with different markings, patent not found)

0400. Unmarked - - 13.5". United States Cavalry picket fence stake pin with claw and hammer heads. Good++. (Smith 207)

0401. IDEAL / PAT. 1724680 - - 13.75" tent stake with double hammer heads. Pat. Aug. 13, 1929 by Cecil Wickstrum if Omaha, Nebraska. PAT.

0402. Unmarked - - 13.25" like United States Cavalry picket fence stake pin (Lots Nos. 16 and 400 above) except has a nail puller and pry bar on the end. Good++. (no info)

0403. Unmarked - -10.25" malleable cast double jawed combination pliers type tool. Pot lifter? Excellent.

0404. RENCHALL (in a hotdog shaped logo) TRADEMARK - U.S. & FOREIGN PATENTS P. - - 8.5" quick adjust combination plier tool with a nut wrench and wire cutters. Unusual tool. Patented Jul. 03, 1923 by Adolph Bangert and Frederick May of New York, New York. Good+, handle spring is missing. (S281, see S769 for same tool made in Germany) PAT

0405. DIAMOND in a diamond logo) - DULUTH USA / US (US Army issue?) - - 6" slip joint pliers with a 4" Crescent type adjustable wrench on the end of one handle and a screwdriver on the other. Older Handy Boy style with blade type wire cutter and thicker jaw tips. Good+. (S243)

0406. DIAMOND in a diamond logo) - DULUTH USA / US (US Army issue?) - - 6" slip joint pliers with a 4" Crescent type adjustable wrench on the end of one handle and a screwdriver on the other. Older Handy Boy style with blade type wire cutter and thicker jaw tips. Excellent. (S243)

0407. 20TH CENTURY / THE BRIDGEPORT HARDWARE MFG. CORP. - MADE IN USA - -12.75" box or crate tool with hammer, nail claw and pry bar with a nail claw and wood slab handles. Patented by Willis Hobbs of Bridgeport, Conn. on Dec. 30. 1913. Good++. (Hammer Book 27-1) PAT

0408. THE AMERICAN - PATENT / APL'D FOR - COMBINATION - - 9.5" cast household combination tool with two plier jaws, pot lifter, etc. similar but much rarer than the Handy No. 3 combination tool (see S813). Excellent.

0409. TRANSATLANTIC CLOCK & W. CO., NY. - GERMANY - - 8.5" center screw double jaw nut wrench with tool holder with screwdriver bit on end of hollow handle. No extra tool bits in hollow handle. Good+. (similar to S768)

0410. FASTFIT WRENCH NO. 12 / FASTFIT WARRANTED FORGED STEEL - MADE IN ENGLAND - - 9" Cochran style self adjusting wrench with a notched open jaw on the end similar to the American made Simplex wrenches. Good+ with over all casting roughness. (not listed)

0411. CHAMBERLAIN'S WRENCH / PAT. OCT. 22, 1912 - - 9" combination adjustable nut wrench, pliers, screwdriver, wire cutter and threading die. Patented by John Chamberlain of Bismark, North Dakota. Excellent. (S805) PAT

0412. KNIGHT - PAT. NOV. 15, 1910 / W. SCHOLLHORN CO. NEW HAVEN, CONN. - - 6.25" slip joint pliers with an open end wrench and screwdriver on the handle ends. Patented by Frank Knight of New Haven, Conn. Good+. (see S245 for a more commonly found version of the Knight patented pliers) PAT

0413. MEDHUS-PIHL MFG CO - HASTING, MINN - PAT APR 3, 06 - - 8.5" combination pivoting head tool with nipper and plier jaws. Patented by Ole Medhus of Faribault, Minnesota. Black finish. Spots of pitting (some on markings), replaced pivot bolt nut. (similar to S280) PAT

0414. HLBERAT? (rest of the markings not readable) - - 12.5" malleable cast tong like tool with a hammer head. Possibly a blacksmith's or ferries' tool. Jaws are similar to horseshoe nail clinching tong jaws. Overall casting roughness. (not listed, no info found)

PiCs Lots 397 thru 414

0415. SOLINGEN Germany - - 10.5" tool kit with a one bladed pocket knife-tool holder and seven tools that lock in the holder. All in a zippered cased. Good++. looks like there is a place for one more tool.

0416. UTICA CUTLERY CO - UTICA, NY USA - - 9" tool kit with a one bladed pocket knife-tool holder, a 4.5" pliers marked KRAUETER 1830-5 USA, and five tools that fit in the knife handle, including a hammer, saw, file, screwdriver and chisel. All in a "Genuine Leather" case with zipper. Good+.

0417. SEABOARD STEEL CO - MADE IN FRANCE - - 5.5" pocket knife and Crescent type wrench with a knife blade, two screwdrivers, file, bottle opener, and a leather punch. (similar to S94). Good++, spots of plating wear.

0418. STAINLESS STEEL - JAPAN - - 6" tool kit with holder and five tools plus a fishing hook and line. Picture of fisherman catching a fish is etched on the leather? case. Excellent.

0419. VOSS CUT. CO. - GERMANY - - 4.25" pocket knife and adjustable wrench combination tool knife blade, files, corkscrew, punch, screwdriver and screw adjust wrench. Excellent, plated.

0420. Unmarked - - 3.25" pocket type hollow tool holder with four tool bits. Excellent with nickel plating.

0421. L. B. I CO. TRADEMARK (with flag and flag pole logo) - 115 Broadway, NY USA - - 5.5" tool holder with hollow handle with over twenty different fools. Excellent.

0422. Lot of three: Combination Knife Tools
(1.) SOG PARATOOL - USA - US PATENT #5,267,366 - - 6.5" Leatherman type pliers and pocket knife with nine blades or tools and two rules. Pliers has unusual adjustable handle angle feature. Patented by Spencer Frazer of Edmonds, Wash. on May 27, 1992. List price is $93.00. Excellent. PAT
(2.) STAINLESS - CHINA - - 3.1/2" mult-tool knife with 10 blades or tools. Excellent.
(3.) ALLTRADE - STAINLESS - CHINA - - 6" knife/pliers multi-tool with five blades. Excellent.

0423. BUCK KNIVES BUCKTOOL MODEL 360 USA / PATENTS PENDING - - 6.5" Leatherman type pliers and pocket knife (with locking blades) multi-tool with nine tools. This model as been retired by Buck Knifes. Excellent

0424. POWER PLIERS - SOG SPECIALTY KNIVES & TOOLS - EDMONDS, WA - - COMPOUND LEVERAGE- PAT. PEND. - -7" Leatherman type pliers and pocket knife multi-tool with thirteen tools. Excellent (over $100.00 new price)

PiCs Lots 415 thru 424

0425. Fordson tool box with six Fordson Wrenches including a curved handled Crescent type.

0426. 752-753 - 754 - 755 - - 16: cast, sheet metal and wooden tool box with oil can compartment. Excellent with some original orange paint.

0427. FORD (in script) - - 5.5" oil can.

0428. IHC logo - 1975A EXTRA SMALL - - 7.5" cast planter plate,

0429. X127X (Ohio Rake Co. - Dayton, Ohio) - - 7" implement wrench. Good++, some weak markings. (R359)

0430. COATES (in cutout letters) (A. W. Coates & Co. - Alliance, Ohio) - - 19.5" cast iron implement seat with original spring steel stand. Nice fancy seat for Coates' Self Dump & Spring Seat Hay & Grain Rake" with two hooks on each side that were attached to the rake teeth bar. Coates Tradecard PiC

PiCs Lots 425 thru 430

Brass, Aluminum Bronze and Beryllium Copper Non-Sparking Tools - Group One (Lots 431 thru 447)

0431. AMPCO (in a diamond) - W764 - 1-7/16 - 1-5/8 / MADE IN USA - - 16.5" large heavy double open ended wrench. Good++.

0432. AMPCO (in a diamond) - W760 - 1-1/4 -1-5/8 / MADE USA - - 15" double open ended wrench. Excellent.

0433. AMPCO (in a diamond) - W84 - MADE IN USA - 1-7/16 - 1-5/8 - - 13.5" double open ended wrench. Good with some dings, drilled hang hole.

0434. AMPCO (in a diamond) - W728 - 25/32 - 31/32 / MADE USA - - 9" double open ended wrench. Excellent.

0435. AMPCO / W-704 Al BR - 9/16 - 5/8 - - 6" double opened wrench. Excellent.

0436. AKRON BRASS MFG COMPANY INC. WOOSTER, OHIO / GENUINE ROCKER LUG COUPLING - - 9.25" (when open) brass folding fireman's hose coupling wrench. Excellent.

0437. AMPCO (in a diamond) - US - - 15" spud or construction type wrench. Good+ with some dings.

0438. BERYLCO - BE CU - S150 - - 11" large beryllium copper scraper head. Excellent.

0439. HYDE BRASS NON-SPARK / 02080 - US PAT. 4524514 - MADE IN USA - - 7.5" plastic handle putty knife. Excellent.

0440. AMPCO (in a diamond) - S22 - USA - - 8.5" large scraper head. Good+.

0441. BERYLCO S-111 / BECU - USA - - 7" beryllium copper scraper head. Excellent.

0442. HHM - B - 77234 - - 11" brass tongs. Excellent.

0443. K-31 AMPCO (in a diamond) MILWAUKEE - - 8.5" wooden handle putty type knife or scrapper. Good++.

0444. 10 IN - AMPCO (in a diamond) W-72 - ALBR - MADE IN USA - - 10" aluminum bronze Crescent type wrench. Good++.

0445. AMPCO C-17 / ALBR - FM (in a diamond) - - 8.5" cold chisel. Good+.

0446. DE NEUI - PAT. 1931576 - - 7" brass hog ringer. Patented 10-24-1933 by Dickie De Neui of Grundy County, Iowa. Excellent. PAT

0447. AMPCO (in a diamond) - BERRYILIUM / P31 - USA - - 7.75" slip joint pliers. Good++.

PiCs Lots 431 thru 447

Fencing Tools - Group Four (lots 448 thru 497)

0448. Unmarked - - 36.5" fence stretcher with wooden handle with cast parts. Listed in Smith's book an "Universal Fence Co." product. Good++. (Smith 440)

0449. Unmarked - - 17.5" cast fence stretcher. Listed in Smith's books as a "Brown Stretcher" Good++, some casting roughness. (Smith 327)

0450. PATENT NO. 2158128 AND PATENTS PENDING - - 32.5" cast fence stretcher and stable puller. Patented May 16. 1939 by William H. Koch of St. Paul, Minn. Excellent, new paint. (Smith 434) PAT

0451. MFD. BY REIN LEITZKE - HUSTISSFORD, WIS. / WS1 - - 25.5 cast fence stretcher. Excellent. (Smith 310)

0452. PASDERIA WIRE SPLICER & STRECHER / PATD DEC. 16, 1924 - PAT APPLD FOR - - 23.5" cast stretcher and splicer. Patent was issued to Edward Pasdera of St. Paul, Nebraska, Good++. (Smith 353) PAT

0453. Unmarked - - 23.5" malleable cast combination fence stretcher, hammer and staple puller. Listed in Smith's book as an "Eclipse Lever Stretcher". Excellent. (Smith 297)

PiCs Lots 448 thru 453

0454. Unmarked - - 12.25" combination wood handled hammer type fencing tool with nail claw, alligator wrench, stable puller and setter. Patented by Aubrey O. Highsmith of Dallas, Texas on May 23, 1911. Good with pitting and a 1.5" long handle crack. (Smith 181)

0455. Unmarked - - 14.5" Highsmith patented combination fence tool like Lot 454 above. An all metal handle has been welded just below the head and the staple setter rod is an old star concrete drill. Poor because of pitting and replaced parts (Smith 181)

0456. CHURCH BROS / CHURCH BROS.- ADRIAN MICH - - 15" malleable combination fencing tool with an open ended wrench. Good++. (Smith 97)

0457. Unmarked - - 12" heavy cast wire twister. Part of the Brown Fence Company tool, See Lot 459 for the other part. Excellent. (Smith 701)

0458. RANCHMAN / FORGED TOOL STEEL - - 12.25" hatchet combination tool with hammer, pincers, nail claw, screwdriver and leather punch. John Morris Pat of July 19, 1898 probably applies. Good++. (Smith No, 12, S802) PAT

0459. BROWN FENCE CO. - CLEVELAND O. - - 10.75" all metal fencing tool with a ratcheting center section and lever lock. This is a two part tool, see Lot 457 for the other part. Good+ with overall light pitting or casting roughness. (Smith 701)

0460. Unmarked - - 21" wooden handled "What's It" combination tool with hammer head, nail claw, pry bar, etc. Owner had this tool with his fencing tools but I haven't been able to identify. Good+. (couldn't find in Smith's book) Note: I have been notified this is a combination nail puller an box opener patented Aug. 20, 1889 by Dayton C. Hawkins of Terre Haute, Ind. PAT

0461. Unmarked - - 13" combination fencing tool with hammer head, wire cutter, etc. Good++. (Smith 78)

0462. DUNLAP - - 12.25" all metal combination fencing hammer with staple puller and nail claw. Good++. (Smith 179)

0463. FENCE MASTER - PAT. NO. 2462250 - - 10" combination fencing tool with a hammer, staple puller, nail claw, cutters, pliers, etc. Patent titled "Staple Puller" was issued to Howard David Andrews of Salinas, Calif. on Feb. 22, 1949. Good++, few bad markings, (Smith 15, not in Schulz) PAT

0464. COMB. WIRE FENCE REPAIRER - PAT. AUG. 31, 09 - - 8.5" Combination fence tool with a hammer, wire cutter. splicer, staple puller, etc. Patented by Robert C. Johnson of Fort Benton, Montana. Good++. (Smith 50) PAT.

0465. MILBAR - USA - - 11.5" automatic wire twisting pliers with cutter. Excellent.

0466. Eagle logo (with several unreadable markings) - N-2 - BEIHILAL FENBURG / INALBERA - - 9" combination pliers type tool with two hammer heads, pliers, and nail claw. Excellent except for some weak markings. (like Smith 61)

PiCs Lots 454 thru 466

0467. Unmarked - - 14.5" combination hammer and staple puller? Has wooden slab handles. Excellent. (not listed, no info found)

0468. Unmarked - - 14.5" large nippers with hammer head and wire stretcher claw on side of jaws. Has old style ball ends. Good++. (Smith 142)

0469. JAMCO - - 12.5" odd malleable plier type combination tool with two hammer heads. Excellent (not listed, no info)

0470. MFG. BY MAASDAM POW'R-PUILL - BURBANK, CALIF USA - PAT. NO. 2-607-095 - - 7.5" wire grip identical to Smith 760 marked Franklin Wire Grip, Denver, Colorado. Patented by Abraham G. Maasdam of Steamboat Springs, Colorado. on Aug. 19, 1952. Good++. (See Smith 760) PAT.

0471. D & B PAT. AUG. 10, 75 - - 12,75" early malleable iron staple puller and barbing tool. Patent was issued to John Dobbs and Benjamin F. Booth , both from Victor, Iowa. Excellent. (Smith 165) PAT.

0472. Unmarked - - 13.25" pliers type barbing tool. Identified in Smith's book as Charles Kennedy's (of Hinckley, Illinois) July 25, 1876 patent. Good+. (Smith 166) PAT.

0473. Unmarked - - 14" plier type tool. Looks like a longer version of the Kennedy barbing tool (Lot 471 above). Good+. (Smith 166) PAT.

0474. 256 1944 (with an arrow head logo) - ENGLAND - - 15.5" World War II British military folding handle wire cutters. Good++. (couldn't find in Smith's Book)

0475. CHILLINGTON - 1940 - with an arrow head logo - - 13.5" (when opened) folding saddle bag wire cutters. Smith states patented in 1917, i couldn't find the patent. Good++. (Smith 113)

0476. THE "BOBBED WIRE II BOOK BIBLE - And Illustrated Guide To Identification And Classification Of Barbed Wire By Jack Glover - - 9". Published in 971, identifies around 500 wires plus several pages of fencing tools, etc. Good+.

0477. U.S. WS. CO. (Wm Schollhorn Co,) 1945 - - 9.25" World War II military wire cutters with a hard rubber like handle coating. Patented Jan. 18, 1943 by John W. Geddes of Watertown, Mass. and assigned to the H. K. Porter Inc. Good+, with some cutter blades chips. (Smith 100) PAT.

0478. D189-D190 with a star logo (Moline Plow Co) - - 8" corn planter check row pliers. Good++.

0479. COMBINATION HAMMER CO. - BRADFORD, PA, / PATENTED APRIL 1908 - - 15" all metal combination hammer, nail claw, and pry bar. Good+. (not listed, patent not found)
Note: Patent issued to James M. Kiehle, of Coudersport, Penn. on May 5, 1908 found after the auction. PAT.

PiCs Lots 467 thru 479

0480. DURBIN-DURCO INC. - ST. LOUIS, MO / WIRE STRETCHER 501 - - 20" malleable lever stretcher and staple puller. Excellent. (like Smith 324)

0481. No. 4 (can't read rest of the markings) - - 18.75" malleable compound plier tool. Although this was with the owner's fencing tools I think it's a tire chain tool. Excellent. (not listed)

0482. Marked only MADE IN BELGIUM - - 14" wire cutter. Military? Good++. (Couldn't find in Smith's Book)

0483. PAT'D JAN 2, 1900 - MAY 14 . 1901 - - 17.5" malleable fence stretcher and wire cutter. Patented by Daniel Stetler of Medford in Oklahoma Territory. Good+. (Smith 127) PAT.

0484. Unmarked - - 17.5" malleable cast head with wooden handle ribbon wire stretcher. Patented Mar. 2. 1880 by Jacob & Warren M. Brinkerhoff of Auburn, NY. Good++. (Smith 380) PAT.

0485. PT. APF'R. - - 11.25" fence staple puller and wire cutter Patented by Henry Breiding of Sterling, Illinois on June 25, 1907. Excellent. (Smith 87) PAT.

0486. Unmarked - - 12.5" malleable barbing tool with an example of wire made by this tool. Patented was granted to William H. Jayne and James H. Hill of Boone, Iowa on April 11, 1876. Rare early tool, one of the highest priced tools in Smith's Price Guide. Poor because of pitting, wooden crank knob is missing. (Smith 168) PAT.

0487. KLEIN & SONS / Klein's lineman climbing pole logo - - 7.5" wire splicing tool. (Good++ with owner's ID Number itched on one side. (Smith 727)

0488. Unmarked - -16.5" shop made wire tool? with wire cutter. Good++. (not listed, no info found)

0489. Unmarked - -18" Croft Mfg. & Sales Co., Kansas City, Mo. fence tightener and splicer. Excellent. (Smith 587)

0490. M & M PAT. MAY 22, 1900 - - 10.25" fencing tool advertised as the "M & M Staple Puller And Fencing Pliers". Patented by George D. and Lynn C. Maxson of Edmeston, NY. Good++, couple of the letters are unreadable. (Smith 80) PAT.

PiCs Lots 480 thru 490

0491. Marked only with a star logo - - 29" rope block and tackle stretcher with cast pulleys. Attached is a wire grip marked BUFFALO GRIP NO. 1 - PAT. NOV. 29, 1910 - CAN. JUNE 13, 1911 - WESTERN ELECTRIC. Grip was patented Nov 29, 1910 by Claes A. Svensson of Buffalo, NY. Good++. (not listed) PAT.

0492. PAT'D 1897 - - 24" rope block and tackle stretcher with cast pulleys, clevis and wire grip. Excellent. (not listed, patent not found)

0493. Lot of five: Wire Stretchers. Will be sold choice stretcher.
(1.) STORY STRECHER - BOZEMAN, MONTANA - PATENT 3,020,021 - - 6.5" crank type stretcher. The Story stretchers were patented by Malcolm C. story of Bozeman, Mont. Patent No. 3,020,021 was issued on Feb.6, 1962 but stretcher looks more like Story's patent 3,020,021 issued on Oct. 24, 1967. Excellent. (like Smith 240 except has wooden handle knob) PAT. and PAT.
(2.) STORY STRECHER - BOZEMAN, MONTANA - PATENT 3,020,021 - - 6.5" crank type stretcher, Excellent, (Smith 240)
(3.) STORY STRECHER - BOZEMAN, MONTANA - PATENT 3,020,021 & PAT. PEND. - - 6" main frame part only for a Story Stretcher. Excellent. (see Smith 240)
(4.) Unmarked - - 4.25" in line wire tightener. Like new (Smith 629 "Reel-Tite")
(5.) Unmarked - - 4.25" in line wire tightener. Like new (Smith 629 "Reel-Tite")

0494. Lot of five: Wire Tools, Etc. Will be sold choice tool.
(1.) X514 - X515 - X516 - - 16.5" pulley with rope lock and malleable wire grip. Excellent.
(2.) E. M. WORDEN (can't read all these letters) - LADYSMITH, WISC. PAT. JULY 25, 1911 - - 7.75" combination plier tool with odd jaws, three wire cutters, screwdriver and nail claw. Patent titled "Tool For Operating Upon Cotter Pins" was issued to Edgar M. Worden of Ladysmith, Wisc. Good++ with some weak markings. (not listed) PAT.
(3.) UTICA TOOLS with three diamond logo - - 8" slip joint pliers with wire cutters and pistol type grip. Good++.
(4.) CRONK - - 10.75" fencing pliers with double hammer heads and stable puller. Good+. (Smith 46)
(5.) NEVERSLIP - NEW BURNSWICK, NH - - 8.5" lineman type pliers with replaceable cutter blades. Excellent.

PiCs Lots 491 thru 494

0495. MODEL NO. 9 - PAT. 2057572 - MADE IN USA - - 11" Superior Clothesline Stretcher new old stock with original box and instruction sheet. Patent was granted to Jacob M Haynes of Macksville, Kansas on Oct 13, 1936. Made by Haynes Mfg. Co., Macksville, Kans. Stretcher is in Excellent, like new condition, box is poor. (Smith 238) PAT.

0496. Unmarked - - 5.5" flat steel tool with hand written tag that describes it as a "Volck Nail Barb Clincher to bend nails around wire . . Pat. 431,759 July 8, 1890." Patent was issued to Henry W. Volck of Gothenburg, Nebraska. Also included is a cloth bag that is marked U.S. DEPT. OF AGRI. - AGRI. STAB. & CONS. SER. that was with the tool. Excellent, like new condition. (couldn't find in Smith's book) PAT.

0497. Lot of three: Unmarked - - 4.5" punch-like wire tool on original display cards marked POSI-TIE. "The quick easy way to tie barb wire to metal fence posts Indianapolis, Ind. - West Jordan, Utah - Balkamp 4-7961" (with instructions). Excellent NOS, like new. Will be sold choice tool.

PiCs Lots 495 thru 497

Ratcheting Drills (Lots 498 - 508)

0498. Unmarked except for previous owners scratch markings "Stop thief don't take it because I had one stolen from me. - R. M. Creath - ?? it 3-66" - -14" wooden handle ratcheting drill. Good++.

0499. E, J, WORECESTER & CO. MAKERS - WORCESTER, MASS. - GEORGE HUTCHINS PATENTED MAY 26, 1869 - - 13.5" early ratcheting drill. Interesting mechanism with gears that ratchet the drill when the handle is moved up and down. Patentee George Hutchins resided in New York, NY. Excellent. PAT.

0500. LOWELL WRENCH CO - WORCESTER MASS, - PAT'D DEC 6, 1864 - NO. 2 - - 10.75" ratcheting drill with reverse lever. Patent was issued to D. M. Moore of Windsor, Vermont. Good+, minor dings. PAT.

0501. Unmarked - - 15.5" ratcheting drill with a head that pivots and sets in three different positions. Tool for setting pivot screws into end of handle, Patent was granted to Harvey D. Williams (Ithaca, NY, Horace G. Hoadley (Waterbury, CT), and Everett C. Lewis (Woonsocket, RI) on November 8, 1898. Good++. PAT.

0502. Unmarked - - 10" ratcheting drill with reverse lever and wooden handles. Excellent, good looking tool.

0503. W. M. KNIGHT / BIRMINGHAM, CT. - - 16" ratchet drill with wood handle. Good++. (patent not found)

0504. WHITNEY'S NEW RATCHET PAT'D JAN. 28 - 84, NOV. 10 - 85 - MADE BY P. S. & W. (Peck Stow & Wilcox) - SOUTHINGTON, CONN. - - 12.5" ratchet drill. Excellent , stamped former owner's name. (patents not found)

0505. THE KEYSTONE MFG. CO. - BUFFALO, NY (some letters not readable) PAT. MAY 21, 95 - - 11.5" reversible ratchet drill. Patent was granted to Jacob Emig of Buffalo, NY. Good++. PAT.

0506. Unmarked - - 9" ratchet drill. Excellent. (no info found)

0507. GOODELL PRATT COMPANY - GREENFIELD, MASS. USA - AUG. 13, 1895 - - 8" ratchet drill with reverse lever. The patent was for the drill chuck issued to Herbert D. Landfair of Westminster, Calif. and assigned to the Goodell Brothers , Excellent. PAT.

0508. Marked only 3045 with a "D" & "B" or "R" logo. - - 13" early malleable reversible ratchet drill. Excellent. (no info found)

PiCs Lots 498 thru 508

Brass, Aluminum Bronze and Beryllium Copper Non-Sparking Tools - Group Two (Lots 509 thru 519)

0509. BERYLCO P103 - U.S.A.F.(United States Air Force) - - 8" Beryllium slip joint pliers. Excellent

0510. Can't read markings - - 10" brass like tee handled socket wrench. Good+.

0511. Lot of two: Ampco Aluminum Bronze Wrenches
(1.) AMPCO W706 - USA - 9/16 - 3/4 - - 7.75" double open ended wrench. Good++.
(2.) AMPCO - AL BR 1/2 / W-3120-C 7/16 - - 8" double twelve point box end wrench. Excellent, like new.

0512. BEALON SAFETY TOOL (with a circle in a triangle logo) - - 12" Beryllium copper pry bar. Excellent.

0513. AMPCO BE CU / H30 - USA (all on hammer head) - H. H. KERR TOOL CO. (on handle) - - 13.5" Beryllium claw hammer. Good++, handle may be replacement.

0514. 19114 (Briggs & Stratton) - 13" brass flywheel wrench with four lugs. Excellent, like new.

0515. AMPCO (in a diamond) - W-72 - 10" / MADE IN USA - - 10" Beryllium Crescent type wrench. Good+ with some dings, polished.

0516. MILWAUKEE VALVE CO. / P-84111 - - 9.5" brass valve wrench for bulk fuel tanks?. Good++

0517. APC (in an oval logo) - 164697-D - - 10" turn the handle to adjust clamp type tool with brass head and steel handle. Good++. (no info found)

0518. PAT. JULY 6, 1920 - LOVELACE BROS - CLINTON, OKLA. - - 9" brass tool with steel handle and grinding stone inserts. Patent identifies the tool as a tool to re-grind and true up automotive crank shafts. Patent was issued to Paul Uclair Lovelace of Clinton, Oklahoma. First one I have seen. Good++. PAT.

0519. Marked only P102 and a logo - - 6.5" Beryllium slip joint pliers. Good+.

PiCs Lots 509 thru 519

Automotive and Related Tools Including Wrenches, Valve Grinders and Valve Lifters (lots 520 thru 545)

0520. 0189 (fits Willys Knight hub cap) - - 13.25" malleable hubcap type wrench. Excellent.

0521. K1180 (Maxwell?) - - 12.75". hubcap type wrench. Good++.

0522. WRIGHT 805569 - 380-400 INCH POUNDS WITH TORQUE WRENCH 84922 - - 13" specialty torque wrench adapter with hook spanner end. (no info found)

0523. DIXIE - SOUTHERN MACH. AND TOOL CO, - ST. LOUIS,M MO, - - 8" combination female hex ratchet, open end and hex box wrench with screwdriver. A 1921 ad reprinted in the Missouri Valley Wrench club Newsletter tells us this wrench would replace all the wrenches needed to work on Ford Model "T" transmissions plus other purposes. (not listed)

0524. Timken / W-5099 (Lincoln?) - - 10.75" heavy malleable hubcap wrench. Good++.

0525. WESTON-MOTT CO. - - 9.25" steel hubcap wrench with face spanner pegs.

0526. UNIVERSAL USA / KEN-TOOL - AKRON, OHIO - FORD AND MANY OTHERS - G-15 - - 10" universal drain plug wrench with seven functions.

0527. CUMMINS ENGINE CO. / H5437 - - 8" special wrench with slots and ridges in opening for use on diesel injector pump cups.

0528. FORD SIZE VALVE LIFTER - PAT PEND / ABEL - - 6.5" malleable valve lifter. Excellent. (not listed, patent not found).

0529. SPARK PLUG GAP GAGE .O32 (Scott-Atwater Outboard Motor Co. - Minneapolis, Minn.) - - 6" multi-wrench with four wrench openings, screwdriver, feeler gauge and a compartment to hold spare shear pins. Good+.

0530. KNIGHT - PAT. NOV. 15, 1910 / W. SCHOLLHORN CO. NEW HAVEN, CONN. - - 7" slip joint pliers with twp square box end wrenches and a screwdriver and cotter key tool on the handle ends. Patented by Frank Knight of New Haven, Conn. Good+ with some light corrosion and pitting, not cleaned. (S245) PAT

0531. ("E" in a diamond logo) - US PAT. 1602685 / CAN. PAT. 8-232-1927 - -14.25" valve spring compressor. Patent was granted on Oct. 12, 1926 to David E. and Roy E. Leasure and Robert W. Jackson all from Long Beach, Calf. Excellent. PAT.

0532. W-W CO. - 514 45TH STREET - BROOKLYN, NY. / PAT. OCT. 4, 1921 - MAR. 6, 1923 - - 5" to 9.25" accordion type expanding valve lifter. Patents were issued To Joseph E. Wainwright of Brooklyn. Excellent. PAT. and PAT.

0533. Unmarked - - 15" lever operated valve grinder. Excellent.

0534. FRANK MOSSBERG CO. - ATTLEBOROUGH, MASS. USA - - 21" speed wench type valve grinder. Overall light to medium pitting.

PiCs Lots 520 thru 534

0535. GOODELL PRATT COMPANY - TOOL SMITHS - GREENFIELD, MASS - USA - PAT'D JULY 7, 1914 - - 10.5" crank type valve grinder. Patented by Oscar D. Hapgood of Orange, Mass. and assigned to the Goodell Pratt Co. Excellent. PAT.

0536. Unmarked - - 9.25" brace type valve grinder with wooden knob and grip.

0537. Unmarked - - 10.75" lever operated valve grinder.

0538. Lot of two: Suction Cup Type Valve Grinders
(1.) Unmarked - - 11.5" Archimedes screw type with rubber suction cup. Good++.
(2.) CAL VAN TOOLS 561 - MADE IN USA. - - 9" plastic shaft with two suction cups. Excellent.

0539. Unmarked - - 9" valve grinder with wooden knob and handle. Good+.

0540. ZIM MFG. CO - CHICAGO - PAT. APPLD. FOR - - 7" crank type valve grinder. Excellent. (patent not found)

0541. Lot of two: Valve Lifters
(1.) Unmarked - - 5.25" valve lifter.
(2.) Unmarked - - 9" malleable plier type valve lifter.

0542. BRIDGEPORT NO. 62 / PAT. APP. FOR - USA - - 8" malleable valve lifter. Excellent. (patent not found)

0543. BRIDGEPORT NO. 62 / PAT. APP. FOR - USA - - 8" malleable valve lifter. Excellent. (patent not found)

0544. Lot of four: Small Valve Grinders
(1.) Unmarked - - 4". All metal.
(2.) VG3 - WALDEN WORECESTER - USA - - 4". All metal. Some light pitting.
(3.) Unmarked - - 5" with wooden knob. Good++.
(4.) VG3 - WALDEN WORECESTER - USA - - 4". All metal. Good++.

PiCs Lots 535 thru 544

Hardware Company Tools - Group Two (lots 545 thru 564)

See Choice Box 66 for eight hardware company six inch monkey wrenches, several more hardware company items in other box lots

0545. KEEN KUTTER (with logo) - NO. K1946 - - 10.5" fencing pliers with staple puller and two wire cutters. Good+.

0546. KEEN KUTTER - 12 IN. - - 12" Crescent type wrench. Good+.

0547. Lot of two: Keen Kutter Scissors. 6.5" and 8.5".

0548. E. C. SIMMONS KEEN KUTTER (with logo) - - 9.75" automatic drill. Good++.

0549. SHAPLEIGH'S - - 6.5" slip joint pliers. Excellent.

0550. E. C. SIMMONS KEEN KUTTER (with logo) - PAT MAY 26 03 - - 7" screw adjust alligator wrench. This is the Victor wrench made by Kraeuter for Simmons. Patented was issued to Charles Bonney of Portsmouth, Ohio. Good+ with one screw replaced with a rivet. (see S37) PAT

0551. E. C. SIMMONS KEEN KUTTER (with logo) - - 5.5" slip joint pliers. Excellent with plated finish.

0552. WINCHESTER TRADEMARK 2488 - 8 IN. - USA - - 8" slip joint pliers with screwdriver on end of handle. Excellent with plated finish.

0553. Lot of three: Two Keen Kutter Pliers and One Shapleigh Double Open Ended Wrench
(1.) D-E (Shapleigh's logo) / 21 - 1/8 - 3/16 - - 3" double open ended wrench.
(2.) KEEN KUTTER (logo) - - 6.5" slip joint pliers.
(3.) KEEN KUTTER (logo) - - 5.25" flat nose pliers. Good+ with some dings.

0554. KEEN KUTTER (logo) - PAT. APD FOR . MALLEABLE IRON - - 18" ram type malleable nail puller. Good++.

0555. SHAPLEIGH'S HAMMER FORGED - - 13" claw hammer. Good++ except for chip on one claw end.

0556. SHAPLEIGH'S HARDWARE CO, - DIAMOND EDGE (with diamond logo) - - 13" claw hammer. Good.

0557. SHAPLEIGH'S HARDWARE CO, - DIAMOND EDGE (with diamond logo) - - 14.25" hatchet with nail puller notch. Good++.

0558. E. C. SIMMONS KEEN KUTTER (with logo) - - 13.75" hatchet with nail puller notch. Good++.

0559. E. C. SIMMONS KEEN KUTTER (with logo) - - 14" hatchet with nail puller notch and hammer head. Good.

0560. E. C. SIMMONS KEEN KUTTER (with logo) - - 14" hatchet with nail puller notch. Fair.

PiCs Lots 545 thru 560

0561. SHAPLEIGH'S HARDWARE CO, - DIAMOND EDGE (with diamond logo) - FOR SPORTSMAN (with bird dog on point stamping) - Handle is also marked SHAPLEIGH'S - - 13.75" rare hatchet with leather sheath and original handle. Good+ with some minor pitting.

0562. SHAPLEIGH'S HARDWARE CO, - DIAMOND EDGE (with diamond logo) - - 13.5" hatchet with leather sheath. Good++.with replaced handle?

0563. E. C. SIMMONS KEEN KUTTER (with logo) - - 9.75" hatchet. Good+, shortened handle has been taped.

0564. GOODYEAR (with logo) - -13.75" hatchet with nail puller notch. Replacement handle, some grind marks.

PiCs Lots 561 thru 580

Alligator Type Wrenches (lots 565 thru 580)

0565. THE TRIPLET WRENCH - PAT AUG 19, 1913 - - 5.5" double ended bicycle or pocket wrench with adjusting bolt and alligator heads plus two tap holders. Usually found marked "Pat Applied For", this one has the patent date. Patented by John Anderson of Portland, Conn. and mfg. by G. L. Holt Co. of Hartford, Conn. Also made or sold by Stanley for a short time circa 1913. Good+ with some weak, unreadable markings. (S106) PAT.

0566. INVOLUTE WRENCH -TOWER & LYONS CO - PAT'D OCT 30, 1900 - - 5.5" single ended alligator wrench with a screwdriver on the end. First wrench in Schulz's Book. Patented by Maschil D. Converse of New York, NY. Good+ with some weak markings. (S1) PAT

0567. SHAW PROPELLER CO. BOSTON, MASS / PAT'D APRIL 26, 1910 & PATS PENDING (etc.) - - 3.75". Smallest wrench in the Shaw alligator wrench line. Patented by George Bryar of Boston. Good+ with some spots of light pitting. (S36) PAT

0568. GENUINE MCKIBB0N (etc.) / PAT. NOS 1872780 - 1730671 - 1709589 - - 18" extra heavy duty adjustable alligator wrench with an unique sliding jaw and adjusting nut action. Made by the McKibbon Universal Wrench Co. of Nashville, Tennessee. Joseph McKibbon of Columbia and Culleoka, Tennessee and later Los Angeles, CA. received three patents for his pipe and nut wrench in 1929 and 1932. Excellent. (S693) PAT.

0569. BOYNTON'S PATENT / PAT'D JUN 14 - 1887 - - 13.25" Heavy-duty screw adjust alligator wrench made by the Campbell Printing Press & Mfg Co. of New York. angled lower jaw variant which was covered by the patent issued to Edward S. Boynton of New York, NY. Good++. (S28) PAT.

0570. 8 INCH SHARK - PAT PEND'G. / RICHARDS MFG CO AURORA, ILL - - 8" adjustable alligator wrench. Patented by Herman Paquette of Chicago, ILL. on Jan. 25, 1910. Heavy pitting on one side. (S23) PAT.

0571. 12 INCH SHARK - PAT PEND'G. / RICHARDS MFG CO AURORA, ILL - - 12" adjustable alligator wrench, larger size than Lot 570 above. Good+ with some dings. (S23) PAT.

0572. BAUER'S PAT. MAR. 10, 85 - - 10" split handle plier type wrench with a pin that fits into one of four holes to change adjusting range. US patent granted Mar. 10, 1885 by John C. Bauer of London, England. Excellent. (S333) PAT.

0573. Z 12 IN / PAT APL'D FOR - - 12" malleable iron quick adjust with pipe jaws variant. Pat. Oct. 31, 1905 by Frederick Zwicker of Indianapolis, IN. Good++. (S732) PAT.

0574. 12 IN CRAFT PAT'D / DROP FORGED (with a "L" in a diamond logo) - - 12" screw adjust alligator wrench. Excellent. (not listed, patent not found)

0575. PATENTED MAY 26, 1903 / NO. 3 - - 10" screw adjustable alligator wrench patented by Charles Bonney of Portsmouth, Ohio and probably made by Kraeuter & Co. of Newark, New Jersey. First No. 3 model I have seen. Good++. (see S37 for more commonly found version) PAT

0576. Unmarked - - 12" wood handled version of the Vandegrift sliding wedge quick adjust alligator wrench (serrated pipe jaw variant). The Vandegrift alligator type wrenches were patented Pat 1-6-1891 by Theodore Vandegrift of Shelbyville, Indiana and mfg. by the Vandegrift Mfg Co in Shelbyville. Missing the sliding wedge, jaw serrations are chipped, handle chips. (S724, C313) PAT

0577. AMERICAN SAW CO - PATENTED APRIL 8, 1890 - - 9" screw adjust alligator wrench advertised as the "Curtis Pipe Wrench" Rare small size Pat. by Andrew Curtis of Monroe, Maine and mfg. in Trenton, New Jersey. Good++ except for jaw end chip. (S596) PAT.

0578. FORD NO. 2 WORLD'S CHAMPION . FASTNUT / REG. PAT. NO. 194041 - - 6.25" with odd jaw openings. British patent for "Improvements in Fixed Jaw Spanners " was granted to Walter Herbert Cook on March 8, 1923. First one I have seen with the Ford marking. Excellent. PAT

0579. THE VICTOR - PAT MAY 26 03 - - 7" adjustable alligator wrench patented by Charles Bonney of Portsmouth, Ohio and made by Kraeuter & Co. of Newark, New Jersey. Good+. (S37) PAT

0580. TIGER GRIP MP'LS (MINNEAPOLIS) MINN. / DROP FORGED - PAT APLD - - 8.25" hinged end self adjusting alligator wrench. Good++. (S719)

PiCs Lots 561 thru 580

Adjustable Wrenches - Group Five (lots 581 thru 591)

0581. OTC - OWATONNA TOOL CO. - OWATONNA, MINN. - PAT APPLD FOR - MAX. 2-7/8 / 66L - - 23" hugh adjustable wrench with jaws that adjusts by a placing a bolt in different holes. Excellent except adjusting bolt looks like a replacement. (S518)

0582. Whitman & Barnes logo - PAT. APR. 19, 98 - - 17.25" Knife type wood handled center adjust wrench with reversible serrated lower jaw inserts. Design patent for the jaw inserts was issued to Henry J. Martin of Chicago. Scarce large size. Good+ with some minor dings. (S864) PAT.

0583. A. H. ADAMS PIQUA, O PATENTED JAN 24, 99 - - 17" primitive looking nut and pipe wrench with a one piece lower jaw and handle assembly that is turned to adjust and a lever that positions the upper jaw,. Unique and RARE. Patent titled "Pipe and Nut Wrench" was granted to August H. Adams of Piqua, Ohio. Light pitting, old weld repair on lever, lower jaw chip. (S583) PAT.

0584. "VICTOR" TRADEMARK - PAT. DEC 23, 1902. PAT.- AUG 25, 1903 / BONNER'S PAT. 1902 - 1903 - - 15.25" quick adjust pipe wrench made by the Bonner Mfg. Co. of Chrisman, ILL. and patented by Clarence E. Bonner, Cherrypoint, IL. Good++. (S653) PAT.

0585. 14" MAGMUM PIPE WRENCH / MAGNUM TOOL CO - PAT PEND - - 13" self adjust wrench with a pivoting, spring loaded upper jaw that can be set to four different notches on the handle. Patented by Carlos V. St. Claire, San Bernardino, CA. Also found with additional markings "Muesco - Houston, Texas". Good+ with upper jaw chip. (S335) PAT.

0586. TRADEMARK WRIGHT WRENCH MFG.(with logo) - WRIGHT WRENCH CANTON, OHIO / PAT 3 - 04 - 1 - 09 - STEEL FORGING - - 12" rack teeth type quick adjust nut wrench. Also found marked Tacoma, Wash. Excellent. (S543, C342) PAT.

0587. THE BECKLIN WRENCH CO. SEATTLE, WASH / PAT MAR 16, 1920 60 CARBON STEEL - - 14" quick adjust rack wrench with unique pivoting release lever. Patentees were John H. Lagreid and Oscar Becklin both of Seattle. Good+ with upper jaw lip chip. (S713) PAT.

0588. A. HARVEY'S SONS MFG CO LTD DETROIT, MICH / HARVEY'S WRIGHT WRENCH PAT FEB 1910 - NOV 1911 (and A H S in a diamond logo) - - 16" quick adjust pipe wrench with rack teeth on side of shaft and sliding lower jaw assembly. Patented by James F. Wright of Canton, Ohio. Good++, lower jaw insert is chipped. (S731) PAT.

0589. The Place Mfg Co - Oswego NY / Giles Patent Oct, 30, 88 - - 14" quick adjust pipe wrench. Patented by Julian A. Giles of Oswego, NY. Good++. (S706) PAT.

0590. BAUMO (with arrow logo) PATENTED - 14 - SERIAL NO. 1-14 - GUARANTEED, Etc. / MFG BY JOHN W. BAUMAN & SONS SASSAMANSVILLE, PA. Etc. - - 13" quick adjust rack type pipe wrench with lever that controls the upper jaw. Patented April 23, 1935 by John W. and Stanley W. Bauman both from Sassamansville, Penn. and Irwin W. Bauman of Bluffton, Ohio. Excellent. (S651) PAT.

0591. Marked only with former owner's or maker's initials "TB" - - 16" shop made key type sliding wedge adjustable nut wrench. Nice, crude blacksmith made wrench.

PiCs Lots 581 thru 591

Brace Type Wrenches - Ratchets - Wrench Sets (lots 592 thru 613)

0592. Unmarked - - 15.75" crude brace type square socket driver. Good++. (not listed, no info found)

0593. UTILITY - HILL PUMP VALVE CO. - CHICAGO USA - PAT. OCT. 23, 1917 - - 11.75" with an adjustable sliding socket. Patented by Charles A. Olson and Claude H. Toombs of Geneva, ILL. Good+. PAT.

0594. IDEAL WRENCH CO. DENVER, COLO. - PAT. AUG 13, 18 - - 9" speed or brace wrench with a crank operated worm gear that turns the socket in tight spaces. Patented by G. M. Overtree (Fort Collins, Colo. and V. V. MCMillen (Lafayette, Colo.) and advertised. as particularly useful for Model "T" Ford fourth connecting rods. One of the more complicated gismo wrenches made for this function. Good++. (S188) PAT.

0595. 1451 WALDEN-WORCESTER - USA - PAT. PDG. - QUINTET - - 14.5" brace type socket driver with five sockets attached. Good+. (not listed, patent not found)

0596. HOL-SET MFG. CORP. - ROCHESTER, NY. - PAT APPL'D FOR - - 21" brace type socket driver with six sockets on the hex shaft. Patented Mar. 13, 1928 by Joseph J. Judge of Rochester, NY. Good+, black paint. PAT.

0597. J. H. WILLIAMS & CO. / THE "SUPERRATCHET" - B51A - - 6.75" 1/4" drive reversible refrigeration ratchet with two square box wrenches. Excellent.

0598. PICK-UP - PAT'D - - 8.25" simple ratchet wrench adjusted by lifting the handle and locking it in one of several grooves on the socket head. This is the female square drive ratchet that came with a socket set not the more common one with a permanently attached sparkplug socket. Relevant patent was issued on May 19, 1907 to George B. Pickop of New Britain, Conn. Manufactured by the New Britain Mfg. Co. of New Britain, Conn. and Crescent Mfg. Co. of New York, NY. Good++. (not listed) PAT.

0599. Lot of two: Snap-On Socket Tools
(1.) SNAP-ON NO. 71N - PAT. NO. 1854513 / KENOSHA, WIS. USA Etc. - - 9.75" 1/2" drive ratchet. Patent was issued to Louis A. Hummel of Milwaukee, Wisc. on April 19, 1932. Good+ with some minor dings on handle edge. PAT.
(2.) SNAP-ON - MILWAUKEE USA - - 7.5" early 3/8" drive breaker bar. Good+.

0600. Lot of three: 1/2" Drive Ratchets
(1.) S-K (in a diamond logo) 42470 - PAT NO. 2232477. 10.25" early S-K (Sherman-Klove Co. - Chicago, Illinois) ratchet with attractive designed handle. Patent was issued to Theodore O. Rueb of Chicago on Feb. 18, 1941. Good++. PAT.
(2.) CRAFTSMAN (SEARS) - BE (mfg. code for New Britain Machine) - MADE IN USA - - 10.25" early female drive ratchet. Good++.
(3.) CRAFTSMAN (SEARS) - PAT. PEND. (with a "H" in a circle logo - also mfg. code for New Britain Machine) USA / 045S FORGED - - 10.25" early reversible ratchet. Good+.

0601. Lot of two: Ratchet Wrenches
(1.) NONE BETTER - B50 / MADE IN USA - PAT PEND. - - 7" 3/8" drive ratcheting socket handle. The 3/8" drive plug can pivot 90 degrees. None Better was a New Britain Machine Co. (of New Britain, Conn.) brand. Patented May 31. 1955 by Roy C. Hopgood or Glen Ridge, New Jersey. Good++. PAT.
(2.) REECHET R375 - PAT. 2594669 - - 10" 3/8" drive ratchet extension that is operated by turning the handle. Patented April 29, 1952 by Calvert D. Marshall of Georgetown, Kent. Good with some corrosion and dings. PAT.

PiCs Lots 592 thru 601

0602. KOETH'S INTRCHANGLE TOOL - CURRIER-KOETH MFG CO - CLOUDSPORT PA. - PAT/ 1900 - 1905 - - 8" plier tool with a nail claw and screwdriver on end of handles. Complete kit in the original wooden case with six interchangeable jaws. Patents were granted on Jul. 02, 1901 and June 6, 1905 to Edward Koeth of Tipton and later Doerun, Missouri. Pliers and jaws are in Excellent condition, case is in Good++ complete with label on the inside of the lid. (S816, C112) PAT. and PAT.

0603. PAT PEND'G. (marked on the ratchet) - - Mixed set with a ratchet, extension, screwdriver bit and several sockets that fit the ratchet and an extension and a few sockets that don't fit the ratchet. All in a wooden case. Ratchet head and some of the sockets are made of a non-magnetic bronze like metal. Patented March 15, 1910 by Charles Miller of Syracuse, NY and assigned to the C. M. B Wrench Co. of Syracuse and advertised as the "Silver King Wrench". (S177) PAT.

0604. NO. 353 (with Mossberg logos) - - 8.5" ratchet and a ratcheting socket extension marked RAY SOCKET WRENCH - PATENTS PEND'G - - 9.75". In a wooden case with seven sockets that fit the Mossberg ratchet.

0605. KOETH'S INTRCHANGLE TOOL - MADE BY B. E. HEDGES CO. - - 8" plier tool with a nail claw and screwdriver on end of handles. Complete kit in original fitted fiber? case with eight interchangeable jaws. See Lot 602 above for patent information. Tools are Excellent, case is missing part of the latch.

0606. EIFEL-FLASH PLIERENCH - PAT 5.2.16 - FLASHS'L'S CHICAGO - - 9" early type Plierench (S272) with pouch and three extra jaws. May 5, 1916 patent was granted to Joseph Eifel of Chicago, ILL. Plierench has some dings, pouch is Good++. PAT

0607. LONG - PAT. NO. 476633 - JAPAN (all markings are on metal holder) - - 9" twenty piece socket and ratchet set with metal holder. Good++. (patent not found)

0608. XCEL MULTI-HEAD WRENCH - PAT. APR 29, 1925 - WARRANTRED / MFG. BY PARK METALWARE CO. INC. - ORCHARD PARK, N.Y. - - 6.75" wrench handle with five interchangeable open end wrench heads in a tin box marked "MODEL- S & B 1918" Box is an U.S. Army issued "Bacon Can" which was intended to carry the soldier's meat ration in the field, soldiers recycled them to carry small items like shaving gear, etc. Wrench patent was granted to John Zilliox of Orchard Park, NY. on Apr. 28, 1925 (not April 29 as marked on the wrench). Good++. PAT

PiCs Lots 602 thru 608

0609. CHICAGO MFG. & DISTRIBUTING CO. - CHICAGO / PATENTED MARCH 10, 1914 ("CH" logo) - - 9" malleable ratchet with 11/16" square female drive and fourteen cast sockets marked with the size and correct "A" prefix part number. Patent issued to Gordon K. Wright of Hinsdale, Illinois. Good++. PAT

0610. W.TYZACK SONS & TURNER (Sheffield, England) - (with an elephant logo) - - 43" chain type hand saw with removable wooden handles in a leather pouch. Saw is excellent, pouch is Good+.

0611. Lot of nine miscellaneous sockets and socket tools including two socket wrenches for bit braces.

0612. BILLMONT MASTER WRENCH PATENTED AND PATENTS PENDING MFG. BY EDGAR C. GUTHARD CO. (Chicago, IL) - - 14" ratchet that operates by turning handle. Has one extra socket inside handle. Patented July 22, 1919 by George Rice Fullenwider of Fairfield, Montana. Good+. (S186) PAT.

0613. P. LOWENTRAUT - NEWARK, NJ / TERRITORIES FOR SALE BY S. J. JOHNSTON, LEESBURG, VA - PAT. DEC 4, 1894. - - 13.75" combination adjustable monkey wrench and bit brace. Patented by Samuel J. Johnston of Leesburg, Virginia. Good++ (S55) PAT

PiCs Lots 609 thru 613

Farm Equipment Type Wrenches - Group Four (lots 614 thru 684)

0614. HAYES / A375 (Hayes Pump & Planter Co. - Galva - ILL.) - - 3.75" by 6". Excellent. (R1-227)

0615. FOR WATER PUMP NUTS ONLY 4A334 T1 (Caterpillar) - - I2.5". Good++, uncleaned, as found. (R1-86)

0616. K-L72 (E. W. Ross - Springfield, Ohio) - -11". Good+ with minor jaw lip chip. (R1-402)

0617. K232 (Kingman Plow Co. - Peoria, Illinois) - - 9". Good++ with slight twist, uncleaned. (R1-284)

0618. Lot of three:
(1.) Unmarked 01982AB (Case) - - 11.5" hub cap wrench, stamped steel (R1-78, mistakenly under Case Plow Works listing)
(2.) CHAMPION - 502 - - 8" double open ended wrench.
(3.) F-2372 (Fordson) - 2 (with a "M" in a circle logo) - - 11" double hex socket wrench. Good++.

0619. NEWELL SANDERS PLOW CO A260 (later IHC) - - 19". Good++. (R1-351)

0620. Unmarked (South Bend Chilled Plow Co. - South Bend, Indiana) - - 15.75" plainer version of South Bend's "Octagon" wrench. Used on South Bend's New Casaday Sulky Plows. Some areas with pitting, uncleaned, as found. (R2-267)

0621. Lot of two:
(1.) WOOD (Walter A. Wood Mower & Reaping Machine Co. - Hoosick, Falls, NY) - -11". Good++.
(2.) Unmarked (orphan) - - 4.5" small malleable oddball. Excellent.

0622. NEWELL SANDERS PLOW CO / 24 ( later IHC) - - 11.25" with a disk straightener. Rare Newell Sanders/IHC wrench, listed in Gil Irps' IHC Tool List but not on the IHC Tool Owner's List. Good+ with small drilled hang hole, painted. (R3-163)

0623. B.F. AVERY AND SONS / J97 - - 10". Good+. (R1-27)

0624. B. F. AVERY & SONS / CHILLED PLOW - K209 (Louisville, KY) - - 9.5". Good+. (R1-27)

0625. Lot of two:
(1.) 3329A (Case T. M. Co.) - - 8.5". With old weld repair. (R1-82)
(2.) C188 (Rock Island Plow Co.) - - 10.25" with hammer head. Marked on big end variation. Good with some pitting. (R1-400)

PiCs Lots 614 thru 625

0626. LEADER (could be one of several companies) - - 10.5". Pitting. (R1-293)

0627. DALTEX (Southern Plow Co. - Columbus, Georgia and Dallas, Texas) - - 10". Probably rarest of the Emerson style wrenches. First one I have had to sell. Pitting. (R1-429)

0628. SUNDE CO (orphan) - - 8.5" First one I have seen. Good++. (not in Rathbone, no info found)

0629. AJAX & / SUPERIOR (Rock Island Plow Co.) - - 9". Pitted. (R1-401)

0630. 44 (Brown-Manly Plow Co. - Malta, Ohio) - - 8.25". Excellent. (R1-66)

0631. UNIVERSAL HARVESTER CO - WEST MEMPHIS ARKANSAS - STOCKTON CALIFORNIA - - 8" single hex aluminum wrench. Excellent, like new. (R1-467)

0632. Lot of two:
(1.) 17A (Gale) - - 9". Excellent. (R1-193)
(2.) J. M. CO. - - 9.25". Three dot variation. Good+.

0633. Lot of two: Disk Plow Type Wrenches
(1.) DISK - - (Janesville Machine Co., Later Samson Tractor Co.) - - 14.5". Good+. (R1-265)
(2.) DISC / 217 (Massey-Harris) - - 14.5". Good+. (R1-311)

0634. D. M. SECHLER IMPLT. & CGE. CO. / MOLINE-ILL. - J276 - - 9.5". Some pitting. (R1-419)

0635. INDIANA SILO CO (Anderson, Indiana) - 5/8 - - 11". Good+. (R1-249)

0636. 2340B (probably Eberhard, Pratt or Illinois Malleable Iron) - - 12.5". Largest size of the Farmer's S-type wrenches. Jaw corner crack.

0637. ROCK ISLAND PLOW CO. - H358 - - 13". Pitted. (R1-400).

0638. 697 (orphan) - - 7". Good+.

0639. Crown (Janesville's Crown Mower) - - 7.5". Good++. ( R1-119 under Crown Mfg. Co.)

0640. F153 / ("L" in a circle logo) (Oliver and IHC) - - 8.75". Good++. (R1-360)

0641. Unmarked (orphan) - - 9" oddball with hammer head. Looks similar to the Gale and P. P. Mast C20 wrench but with a more prominent hammer head. Light pitting or casting roughness. (see R1-193)

0642. Lot of four:
(1.) WARREN WEBSTER & CO / CAMDEN NJ - - 11.75". Good++. (R1-482)
(2.) BUFORD / C1 - - 8". Severe pitting. (R1-70)
(3.) W. P. CO. (Wiard Plow Co. - Batavia, NY) - - 9.75". Good+. (R1-488)
(4.) J H CO / 218 (Johnston Harvester / Massey-Harris) - - 9.25". Good+. (R1-272)

PiCs Lots 626 thru 642

Cutout Type Wrenches (lots 643 thru 654)

0643. E39 - IRON AGE (cutout letters) (A. B. Farquhar, York, PA and Bateman Mfg. Grenloch, NJ) - - 8.75" CUTOUT with hammer head. Good++. (R1-260)

0644. S437 - LITCHFIELD (in cutout letters) (Litchfield Mfg. Co., Waterloo, Iowa) - - 7" CUTOUT. Good+. (R1-299)

0645. BUFFALO PITTS (PITTS in cutout letters) CO NY - H O . Also on the IHC Tool List - - 10.25"". CUTOUT. Good+. (R1-68)

0646. BLACKHAWK (in cutout letters) (Sechler / Oliver) - - 7.5" cutout with hammer head. With stud variant. Good++, not cleaned. (R2-36).

0647. JOHN BULL - - 11.5" with CUTOUT letters and a small hammer poll. This is the only known cutout wrench from the United Kingdom and seldom comes up for sale either here or in England. Only the second one we have had the opportunity to sell. .An unconfirmed rumor has it that these John Bull wrenches was given away with a substantial purchase of John Bull Binder Twine. Good+ with minor pitting. (R1-269)

0648. JOHN DEERE (in CUTOUT letters) TR590 - - 18". Largest, most impressive looking and most desirable of all the known cutout wrenches. there is a "Holy Grail" of antique wrenches the TR590 is it.

When I listed Don Ervin's TR590 John Deere wrench on the Spring 2009 Wrenching News Antique Wrench Auction I expected that was the first and last one I would have the opportunity to list. But I now have this one from a non collector from North Dakota that had it for over forty years without realizing its rarity or value. His brother had found it while hunting for old bottles in a small town South Dakota abandoned dump site over forty years ago. It was not previously on my list of known TR590's.

The TR590 wrench came with the experimental John Deere Dain All-Wheel Drive four cylinder, three wheel tractor that John Deere (under the supervision of Joseph Dain Jr.) made in 1919. According to researchers only 100 were made and sold mostly in the Dakota's. The project was abandoned when Deere & Company acquired the Waterloo Boy tractor and produced the Model D Tractors instead. Purportedly most of Dain's tractor were recalled and destroyed.

Condition: The cross bar section of the last "E" is missing and there are some hammer dings on the top edge above the large end, I can just picture some farmer hammering on a half a million dollar tractor with a $20,000 wrench! These dings are fairly minor and not very noticeable. Overall it's is an terrific looking wrench with nice dark even patina and smooth surface with not a trace of pitting. The wrench could be repaired but personally the missing crossbar is part of the history of the wrench and I would leave it as is. Last known auction price $15,000, last known private sales: $14,000 and $20,000. (R135, D536)

PiC Front Side TR 590 (Lot 648) PiC Back Side of TR 590 (Lot 648)

0649. DEERE (in cutout letters) A196 - - 8" RARE hammer head variant with part number right side, top of open end. Hard to find Deere cutout wrench, only the second one we have had to list. Has some light pitting or casting roughness with traces of green paint., Cutout letters are cast crisp and clear. (D159, R2-75)

0650. P & O (in cutout letters) 1338 (Parlin & Orendorff - later IHC) - - 6" CUTOUT with small hammer head. Numbers on back variant. Good++. (R1-370)

0651. H. K. PORTER - BOSTON USA - PAT. JAN. 12, 09 / O. K. CUTTER - SIZE NO, 10.3-15 - HKP (in cutout letters in both handles - - 10" bolt cutter. Patented by Henry K. Porter of CHELSEA, Mass. Part of one cutout "P" is missing, otherwise Good++. PAT

0652. PLANET JR. (in cutout letters) / 3 - (S. A. Allen & Co. - Philadelphia, Penn.) - - 6.5". cutout with small hammer head. Good++. (R1-380)

0653. DEERE (in cutout letters) A196-A - - 8" CUTOUT with part number running up along side of large square box end variant. Good+ with some pitting. (D162, R1-131)

0654. AMES (in cutout letters) (Ames Plow Co. - Boston, Mass. and Norfolk NY) - - 9" rare cutout wrench. Good+ with light pitting or casting roughness. (R1-18)

PiCs Lots 643 thru 654

John Deere and Related Companies Wrenches (lots 655 thru 684)

Also see John Deere Wrenches in the cutout section: TR590 (Lot 648) and A196 Deere with hammers (Lot 649)

0655. Dain / Z-78 - D 6.5" pitman wrench. Markings upside down variant. Excellent. (D562)

0656. Unmarked (Deere H68) - - 6.25" double open ended-s cast wrench with center rib. Good+. (D328)

0657. SC25 (Syracuse Chilled Plow Co. / Deere) - - 6.5" with angled square opening variation. Good+. (D530)

0658. DIXIE MAGNETO (Waterloo Boy / Deere Tractor part #8354) - - 5" loop handle screwdriver. Dill's no. D106 is an unmarked variant of this screwdriver. I suspect this one marked "Dixie Magneto" would be the correct wrench for the Waterloo Boy Tractor. Good+ with light grind marks on tip. (like D106)

0659. A124A / U (Deere) - - 4.25" tee wrench, numbered down shaft with two holes variation. Good+. (D153)

0660. A124 / Z (Deere) - - 4.25" tee wrench, numbered across head variation. Good++. (D151)

0661. 4428C (Marseilles / Deere) - - 7" by 8.5" tee handled socket wrench for Marseilles Corn Shellers. Good++. (D104)

0662. L1146 (John Deere No. 114 Roughage Mill) - - 14.25 "forged double box end wrench. Rare, only four shown on Dill's John Deere Wrench Owners List. Good++. (D417)

0663. DEERE & MANSUR CO / 157 - - 10.25" with six openings and screwdriver end. Good+ with light pitting. (D29)

0664. 136 / (triangle logo) (Deere) - - 10.25". Round holes variant. Good++. (D20)

0665. DEERE / C - PAT APR 28 1903 - - 8.5" buggy wrench with nut holder spring. Patent was granted t0 Nathaniel Stone of Outlook, Washington. Good+. (D618) PAT

0666. P17645- U - with JD logo (John Deere / Holt / Caterpillar) - - 9" early combine extended socket. Good++. (D493)

0667. 159 (Deere) - - 7.5". Some pitting. (D35, R1-130)

0668. DAIN (Dain / Deere) - - 7.75". Dain L136 no number variant. Good+ some light pitting, (D410)

0669. SYRACUSE / LH22 (Syracuse Chilled Plow / Deere) - - 9" with hammer head. Good++. (D420)

0670. G51 (Dain /.John Deere) - - 8.5" with three slots variation. Good+. D317)

0671. DEERE & CO (HZ5322) - - 10" wood handled monkey wrench, knurled adjusting knob variation. Good+ with several dings. (D340)

0672. VAN BRUNT / 1911 - 1986 (with JD logo) - - 7" copy of the No. D380M Van Brunt wrench commemorating the 75th anniversary of the Van Brunt and Deere & Co. merger. Rare variant in brass plated iron instead of brass as listed. Excellent. (not listed as brass plated, see D285 and D286)

PiCs Lots 655 thru 672

0673. D & M (Deere & Mansur) - - 6.5". Different than other ones seen with a little tab between the two open ends. Good++. (similar to D303)

0674. Lot of four: John Deere flat steel wrenches: JD-50, JD-51. JD-52 and JD-53. All in excellent condition.

0675. Lot of three: Mossberg Wrenches Furnished with Waterloo Boy and early John Deere Model "D" Tractors.
(1.) Mossberg No. 276 (Waterloo Boy / Deere K2064) - - 9" double open end. Fair. (D391)
(2.) Mossberg No. 253 (Waterloo Boy / Deere K2239) - - 7" double open end. Fair. (D397)
(3.) Mossberg No. 255 (Waterloo Boy / Deere K2063) - - 7" double open end. Poor. (D390)

0676. Unmarked (Deere AR39683) - - 11.25" wheel socket with hex extension. Excellent. (D232)

0677. Unmarked (Letz / Deere E6075) - - 8" by 13.75" two piece tee handled socket wrench. Excellent. (R1-296, D-302)

0678. M11831 (John Deere / Holt / Caterpillar) - - 9.5" extended double square socket. RARE Holt Combine wrench. Good++. (D459)

0679. M10341M - N1 with JD logo and N1 (Deere) - - 8.5" by 10.5". John Deere grain drill tool. Excellent, with original green paint. (D458)

0680. K806 (John Deere) - - 12.5". Good++. (D386)

0681. B247H - U - JD logo - - 9" binder wrench and crank. Excellent. (D242)

0682. Unmarked (Deere D2064R) - 10.5" flywheel wrench with 3.5" offset. Good+. (D299)

0683. Lot of two: Deere Mansur Co. Wrenches
(1.) A522 / DEERE MANSUR CO. - - 7.5" with reverse markings. Good. (D172)
(2.) A523 / DEERE MANSUR CO. - - 6". Good++. (D177)

0684. Unmarked (Deere No. 561-S for Deere Gold Medal Cream Separators) - - 6.75" spanner wrench, no square hole in handle variation. Excellent. (D58)

PiCs Lots 673 thru 684

Bicycle, Motorcycle and Other Pocket Size Wrenches (lots 685 thru 705)

0685. J. H. FERGUSON DAYTON, O. PAT NOV 15, 1910 - - 5" adjustable double ended bike or pocket wrench with nut and pipe heads. Patent was granted to John H. Ferguson of Dayton, Ohio. Good+. (S108M) PAT

0686. G & J MF'G Co Chicago / C. E. BILLINGS PAT'D FEB 18TH 1879 - - 5" center screw adjust bicycle wrench with an unique bulbous end. Evidently made exclusively for Gormully & Jeffery Mfg. Co. of Chicago, early manufacturer of Rambler bicycles. Patent was issued to Charles E. Billings of Hartford, Conn. Good++, jaws slightly sprung, stamped former owner's initials "H.F.R.". (S857) PAT

0687. BORNSTEIN PAT. JULY 26, 1892 - MADE BY J. A. W. SEABERG MACH. CO. - Malden, Mass. - - 5" turn handle to adjust bicycle wrench with a hex paneled handle. Patented by Henry Bornstein of Boston, Mass. Locking ring is missing, some minor dings, stronger markings than usually seen. (S1066, C37, C95, C276) PAT

0688. No. 0 - PAT OCT. 27, '03 / BULLARD WRENCH - - 5.5" self adjusting wrench with spring loaded pivoting upper and lower jaws. Mfg. by the Bullard Automatic Wrench Co. of Providence, Rhode Island under patents issued to Frank Bullard of Los Angeles, CA. on July 7,1903. Nice small, pocket size in Good++ condition. (like S659) PAT

0689. Cycle Grip Trademark / D. H. Carpenter Patented Feb 10, 1891, Feb 20, 1894 - - 5" Neat quick adjust bicycle wrench with screwdriver blade on end. Applicable patents were issued to Daniel H. Carpenter of Orlando, Florida. Good+ with some light pitting, some weak markings. (not in Schulz, see Cope pg 90) PAT and PAT

0690. COMPLIMENTS LEAVITT MACHINE CO - ORANGE, MASS. - PAT'D - - 3.5" wedge adjust nut wrench. Patent was issued to John R. Long of Akron, Ohio on April 17, 1906 . Good++ with nice plated finish.(S549, C203) PAT.

0691. Unmarked - - 3" screw adjust nut wrench like Tower & Lyons' "The Gem Wrench". Good+ (see S120)

0692. ROBERT BOSCH A.S.- STUTTGART (Bosch logo) - - 3" center screw adjust with one side exposed. Excellent, like new. (not listed)

0693. WAKEFIELD'S UNIQUE WRNCH - MADE IN U.S.A. (with an Indian and two tomahawks logo) - - 6" side adjust bicycle wrench with tire tool end, First time I have seen the logo or Unique imprint. Good++, small chip on the adjusting nut thread, (not listed)

0694. DUIJL'S PATE. / (Lion? logo)- - 5.5" center screw adjust nut wrench with extended lower jaw. Patented by Jozua Cornelis Hendrikus Van Duijl of Kralingsche-Veer, Netherlands on Mar. 15, 1898. Excellent. (not listed,) PAT

0695. HUE (inside horseshoe logo) PATENT HUBER NO. 1 - MADE IN GERMANY - - 6" all metal shim adjust nut wrench. Excellent,

0696. 8 IN ELLIS / PAT NOV 8, 03 - - 6" Crescent type with pivoting head. The Nov. 8, 1903 patent has not been found, a patent granted to David Ellis of Chicago, Illinois on May 17, 1904 is probably the correct patent. Good+ with some minor dings, some blurred markings, stamped initials "F.M.". Plated finish. (S308) PAT

0697. UNIMART - GERMANY - - 5.75" simple lever and rack quick adjust nut wrench. Excellent with plated finish. (not listed, no info found)

0698. GELLMAN WRENCH CORP. - ROCK ISLAND, ILL USA - POLLY / PATENTED APRIL 17, 1923 - 6 IN. NO. 61 - - 6".quick adjust nut wrench, external spring variation. Patented by Israel Gellman of Chicago, ILL. Good+, some grind marks. (S522) PAT

0699. H & H CO. BALTO, MD / PAT. PEND. - - 6" malleable rack type with a wedge to lock the lower jaw. Excellent. (S494)

0700. PAT SEPT. 7, 97 - - 5.75" malleable screw adjust nut wrench with cutout slots in body. Mfg. by the Monte Wrench Co. of Shelbyville, Indiana and advertised as the "Monte Pocket Screw Wrench". Good+, with some light pitting and mushrooming. (S369, C223) PAT.

0701. PARMENTER PIPE & NUT WRENCH PAT'D OCT 5, 15 - OCT 16, 17 - - 6.75" all metal rack adjust with a spring loaded lower jaw. Pat. by George A. Parmenter of Boston, Mass. Rare little wrench in Excellent condition. (not in Schulz, C243) PAT

0702. GOODELL PRATT COMPANY - TOOL SMITHS - GREENFIELD, MASS - USA - - 6" aluminum handled screw adjust nut wrench with dual threaded shafts. Good++ with section of worn adjusting threads but still works smoothly. (S394)

0703. WRIGHT WRENCH CANTON, O. / PAT 3 - 04 - 1 - 09 - STEEL FORGING - - 6" small size rack type quick adjust nut wrench. Also found marked Tacoma, Wash. Good++. (S543, C342) PAT.

0704. JUNE 20, 1899 - - 6.75" plier like tool patented by William H. Edwards of Rockford, Illinois as an "Adjustable Nut Cracker" but the patent specifications note it could be used as a pipe wrench. Good+, some plating remains. PAT

0705. INDIAN MOTOCYCLES - HENDEE MFG CO - SPRINGFIELD, MASS. USA - WAKEFIELD WRENCH WORCESTER, MASS NO. 17 - - 7" side adjust motorcycle wrench with solid handle. Much rarer wrench than the Indian Wakefield No. 8. Good++. (not in Schulz). (S124)

PiCs Lots 685 thru 705

Odd and Unusual Plier Type Wrenches (lots 706 thru 735)

0706. Unmarked - - 8.25" shop made pliers with thick wide jaws. Excellent.

0707. T-615 - Stevens Walden Worcester - Made in U.S.A. - - 7" early oddball tire chain pliers. Excellent.

0708. LOCK LINE - ROSS MFG CO, S. F. - US PATENT 2,370,308 - - 8" cam action pliers with a wire cutter mfg. in San Francisco, Calif. and patented by Abraham Hanson, Monrovia, Calif. on Feb. 27, 1945. Excellent. (S267) PAT.

0709. NACO - PAT 1919 - - 7.25" comb. pliers, cutter and screwdriver end. Pliers has an usual screw adjustment to set the jaw opening. Patent was issued to Dan B. Swickard of Galva, ILL. on Oct. 28, 1919. Tool is Excellent, plating is Good++. (S248) PAT.

0710. TRIPLE GRIP - PAT JUNE 17, 1924 - - 8.25" fixed joint pliers with unique middle jaw that slides up and down as the handles are moved. Patented by Francis Stallings of Effingham, Illinois. Different, scarce plier tool. Good++. (like S266) PAT.

0711. PWA 5689-1 (Pratt & Whitney Aircraft) with engraved markings - - 6.5" aircraft specialty pliers. Excellent

0712. PFEIFFER'S PINCER WRENCH - PAT APR 6, 1915 - TRADEMARK - DROP FORGED - - 7.5" slip joint pliers with a worm and rack teeth locking adjustment. Patented by I. Pfeiffer Jr. of Bedford, Mass. Good++, not cleaned. (S251) PAT.

0713. RAMCO COTTER PLIERS - ST. LOUIS, MO / MADE IN U.S.A - PAT. APPLD FOR - - 7.5" cotter key pliers. Excellent. (S1096)

0714. BERNARD'S PAT. JULY 19. 1892 - SEP. 25, 1894 - Etc. - - 9" fencing pliers with side cutter and single hammer head. Modified jaw? (Smith No. 67) PAT.

0715. THE WEST HAVEN MANUFACTURING CO. - NEW HAVEN, CONN.- PAT'D APRIL 4, 1911 - MADE IN U.S.A. - - 8.75" pliers and wire cutter with a screw adjustment to set the jaw opening. Patented by William A. Peck of Jersey City, NJ. (not listed) PAT

0716. DIAMOND BRAND (with a diamond stone logo) - -9" different oddball locking pliers with four slots to set jaw size. Excellent. (not listed, no info found)

0717. ILL-AR - - 6.25" dual headed pliers. Flip the handles over to switch jaws. (not listed, no info found)

0718. PAT. JAN. 25, '76 - - 6.5" very early patented pliers with cutter and screwdriver end. Plier halves can be taken apart and set in two positions for adjustment. Patent granted Jan 25, 1876 to Albert A. Pease of New Haven, Conn. Excellent with most of the original plating. (not listed) PAT.

0719. Lot of three: Pliers
(1.) PARROT HEAD - FOWLER - OKLA. CITY - PAT'D - - 7" tongue and groove pliers with screwdriver end and offset jaws. Patent was granted to Lewis D. Fowler of Oklahoma City, Okla. on Jun. 29, 1920 and mfg. by the Parrot Head Tool Co., also of Oklahoma City. Excellent. PAT.
(2.) Unmarked - - 8" tongue and groove pliers with straight jaws. Good.
(3.) REED MFG. CO. - ERIE, PA. U.S.A. - - 6.5" slip joint pliers with wire cutter, screwdriver end and strange cutout section on one side of the jaws. Good++, not cleaned. (not listed, no info found) PiC Lot 719-3 - Reed Pliers

0720. WM. SCHOLLHORN - U.S. - - 7" U. S. military dynamite fuse crimping and cutting pliers. Excellent.

0721. Marked only U.S. - - 8" U. S. military dynamite fuse crimping and cutting pliers. Excellent.

0722. 707 - LOCKMATIC - PAT RE. 23,761 U.S.A. - - 7.75" slip joint pliers with a handle latch that locks the jaws. Patent issued to Walter Sarvie of Alexandria, Minn. on 1-30-1941. Excellent, like new with plating. (like S287) PAT.

PiCs Lots 706 thru 722

0723. SUPER GRIP TOOL CO IOWA - PAT 1-16-33 - - 8" pliers with a geared cam mechanism. Patent was granted on June 27, 1933 (not Jan 16, 1933 as marked on the pliers) to Gilbey M. Clifton of Perry, Iowa. Good++, not cleaned. (S245) PAT.

0724. Marked only US - - 8" U. S. military dynamite fuse crimping and cutting pliers. Excellent.

0725. Marked only US - - 8" U. S. military dynamite fuse crimping and cutting pliers. Excellent.

0726. PROTO 234 - MFD. USA - PAT. NO. 2600512 - - 7.75" different tongue and grove pliers. Patented by Homer A. Mead of Turlock, California. Excellent with plated finish. (see S234) PAT

0727. LOCK LINE - ROSS MFG CO, S. F. - US PATENT 2,370,308 - - 8" cam action pliers with a wire cutter mfg. in San Francisco, Calif. and patented by Abraham Hanson, Monrovia, Calif. on Feb. 27, 1945. Good++. (S267) PAT.

0728. K18 - MOTOR SPEC - DULUTH U.S.A - - 8" fixed joint pliers with carrying handle. Good+ with old repair.

0729. Unmarked - - 6.25" fixed joint pliers with carrying handle. Good+.

0730. THE L. S. STARRETT CO. - ATHOL, MASS. USA - PAT'S Sep. 22, 1896 - Nov, 14, 1899 - - 7.25" high quality Starrett nippers with replaceable cutters. Patents were granted to Charles P. Fay and Laroy S. Starrett, both from Athol, Mass. Good++. PAT. and PAT.

0731. THE L. S. STARRETT CO. - ATHOL, MASS. USA - NO. 1-5-1/2IN. - - 5.5" smaller size high quality Starrett nippers with special purpose replaceable cutters. See Lot 730 above for patent info. Good++.

0732. PROTO 234 - MFD. USA - PAT. NO. 2600512 - - 7.75" different tongue and grove pliers. Patented by Homer A. Mead of Turlock, California. Excellent with plated finish. (see S234) PAT

0733. Unmarked - - 7" specialty three jawed pliers for typewriter repair. Excellent with plated finish.

0734. BLEDSOE - TRADEMARK (with logo) MINNEAPOLIS / PAT. PENDING - - 10.5" plier wrench with coarse notched jaws. Patented May 22, 1917 by Yancy Bledsoe of Bonham, Texas. Excellent. (S257) PAT.

0735. TRIPLE GRIP - PAT JUNE 17, 1924 - - 8.25" fixed joint pliers with unique middle jaw that slides up and down as the handles are moved. Patented by Francis Stallings of Effingham, Illinois. Different, scarce plier tool. Good++. (like S266) PAT.

PiCs Lots 723 thru 735

Odd and Unusual Screwdrivers and Combination Screwdrivers with Wrenches (lots 736 thru 761)

0736. Unmarked - -10"combination screwdriver with a double ended reversible blade. Also has a nail puller and three square wrench openings in the two part cast brass handle. Patent for this tool was granted to Levi M. Devore of Freeport, Illinois on Oct. 19, 1897. First one I have seen with a brass handle. Good++. PAT.

0737. Unmarked - - 8.5". combination screwdriver similar to Devore's patent but has just a single ended screwdriver and a one piece cast handle with seven square wrench sizes and two nail pulling slots.

0738. Unmarked - - 8.5" Another example of Devore's patented combination screwdriver with a nail puller and three square wrench openings in the two piece cast handle like Lot 737 above. Good+. PAT.

0739. DEVORE - FREEPORT (weak markings inside cast handle) - - 8" Levi M. Devore's Oct. 19, 1907 patented combination screwdriver with nail puller slot and three square wrench openings in the malleable iron handle. The shaft can be removed from the split handle and reversed. Good with small crack in handle. PAT.

0740. Unmarked - - 7.5" combination screwdriver with five square and five hex wrench openings in cast iron handle, Excellent. (not listed, no info found)

0741. GERMANY - - 8.75" combination screwdriver with five hex wrench openings on the end of a wood slab handle. Good++.

0742. Lot of five: All Metal Loop Handled Screwdrivers. Most appear to be shop made. 6" to 13.5 ". Good++ or better.

0743. Lot of two: H. DISSTON & SONS - PHILADA' (on saw blade) - PATENTED AUG. 28, 1877 (on cast handle) - - 6" and 8" cast iron handle/holders for combination saw and screwdrivers. Patent was granted to Henry Disston and John Vandegrift both of Philadelphia, Penn. One is excellent, the other has the end of the saw blade broken off. PAT.

0744. Lot of four: "DOMESTIC" (on the shaft) and PAT'D MAR. 13, 1877 (on cast handle) - - 3.5" to 4.75" combination screw drivers with wrench openings in the cast handles. Three have two wrench openings and the other has six openings. Patented by Willis D. Gold of Philadelphia, Penn and mfg. by Henry Disston & Sons also of Philadelphia. One of the shafts has been shortened , only two have visible markings on the shaft. (see S831 for two size openings variation) PAT.

0745. Lot of four: Unmarked - - 3.25" to 3.75" combination cast bottle stopper, bottle opener and screwdriver tools. One has the tab for opening lightning type stoppers. All are Excellent, None have the rubber part of the stopper, but I have never seen one with the original stopper. .

0746. Lot of four: All Metal Advertising Key Chain Screwdrivers All Plomb Tool Co. related.
(1.) P & C (in logo) TOOL CO. - - 2.5". Excellent.
(2.) PLOMB TOOL CO. U.S.A - - 2.5". Good+.
(3.) PLOMB HAND FORGED TOOLS - LOS ANGLES / SNIPE AUTO PARTS CO.- - 2.25 " Some pocket wear.
(4.) PLOMB TOOL CO. U.S.A / STANDARD PARTS CO. - TULSA - - 2.25". Good+.

0747. Lot of three: Perfect Handle Wood Slab Knife Type Screwdrivers
(1.) LENOX 2 - - 5.5"
(2.) MADE IN GERMANY - - 4.75"
(3.) MADE IN GERMANY - - 4"

0748. Lot of five: All Metal Screwdriver, Etc,
(1.) Unmarked - - 10" all metal screwdriver. Good+.
(2.) FAIRMOUNT / MADE IN U.S.A - - 9.5" Fordson type screwdriver with cast fluted handle. Excellent.
(3.) Unmarked - - 10.5" screwdriver with cast open pattern handle. excellent.
(4.) Unmarked - - 7.75" screwdriver with heavy cast handle. Good+.
(5.) Unmarked - - 7.5" all metal ice pick or punch with a spring loaded shaft. Good++.

0749. Lot of three: Reversible Double Ended Screwdrivers
(1.) Unmarked - - 4.5" loop handle double ended screwdriver. This is Starrett's "Machinist's Pocket Screwdriver" patented by Laroy S. Starrett of Athol, Mass on Oct. 19, 1897. Good+. PAT.
(2.) B'P. HDWE. MFG. CO. (Bridgeport Hardware Mfg. Co. - Bridgeport, Conn.) - - 4.25" loop handle pivoting double ended screwdriver. Excellent with plated finish.
(3.) Unmarked - -9.25" double ended pivoting shaft screwdriver. Patent issued to John L. Dahl of Teaneck, NJ on July 9, 1918 probably applies. Fair. PAT

0750. Lot of three: Unmarked screwdrivers with cast handles - - 5" to 5.5". Two have open loop handles and the other has a decorative design in the flat cast handle. Good+ and better.

0751. Lot of three: Combination Screwdriver Tools
(1.) Unmarked - - 4.75" wooden handled screwdriver with a hex opening in the shaft. Good++.
(2.) Unmarked - - 3.5" combination tool with to screwdriver blades (one pivots) and an open end wrench. Good++.
(3.) Marked only "US" - - 2.5" US military combination tool for Krag Jorgensen carbines and rifles (circa 1897). Good++.

0752. CRESCENT TOOL CO. JAMESTOWN, NY / 4 IN. PATENTED - - 7.75" Crescent's combination folding handle screwdriver and hammer tool. Patented Feb. 6, 1917 by John Emil Johnson of Jamestown, NY. 6" is Good++. 4" is Good+, some light pitting. (Hammer Book 104-1) PAT

PiCs Lots 736 thru 752

0753. Lot of twelve: Unmarked loop handle screwdrivers - - 3.75" to 8". All Good+ or better.

0754. Lot of five: Two unmarked screwdriver bits with tapered ends for a drill brace and three all metal screwdrivers made from a single rod with the handle formed by curving the rod back and forth several times. There is a patent for these screwdrivers issued to Levi M. Devore of Freeport, ILL. on Aug. 28, 1894. Same person who patented the combination screwdrivers on Lots 736 - 739 above. Advertised as the "Handy" screwdriver for bicycles and sewing machines. PAT

0755. Lot of three:
(1.) Unmarked - - 8.25" all metal screwdriver handle with removable blade. Excellent.
(2.) Unmarked - - 7.25" all metal hex drive socket driver with four sockets in the hollow handle. Good++.
(3.) Unmarked - - 5.5" all metal tool holder with an extra bit in the hollow handle. Good+.

0756. Lot of two: Promotional advertising Screwdrivers
(1.) CLEVELAND FLUX CO. - CLEVELAND, OHIO - FAMOUS GORNELL FOUNDRY FLUXES - - 6.5" with a brass hollow handle that contains three nested small screwdrivers. Excellent.
(2.) CARSTAIRS BLENDED WHISKEY - - 3.5" with a handle shaped like a whiskey bottle. Excellent.

0757. GOODELL PRATT COMPANY - TOOL SMITHS - GREENFIELD, MASS - USA - - 5" all metal tool holder with three screwdriver bits (two in handle). Good+.

0758. "YANKEE" NO. 41 - NORTH BROS. MFG. CO. - PHILA., PA - PAT. JAN. 25, 98 - OCT. 29, 01 - FEB. 10, 20 - - 11" push drill with eight drill bits. Good+. PAT, PAT and PAT

0759. Lot of three: all metal screwdrivers. One marked PENNANT (in a pendant logo) and one has a hammer head on end of the handle.

0760. Lot of five: All Metal Advertising Screwdrivers
(1.) THE FARMER'S SAVING BANK KALONA, IOWA / TRY ME FIRST AND THEN TRY OUR BANK - - 7.75"
(2.) VIGO COAL & SUPPLY - 720 N. 7TH ST. - TERRE HAUTE, IND. / COAL - COLEY'S SPECIAL GAS - OILS - - 8".
(3.) COMPLENTS OF HINES' RADIO SERVICE - PAT. 1-4-10 - - 7.5"
(4.) C. L. STEWART / MOTOR INN - WELLINGTON, KANS - - 6". Spot of minor pitting.
(5.) GOODRICH / GOODRICH - - 4.75"

0761. Lot of seven: All Metal Advertising Screwdrivers -- All approximately 3.75" long.
(1.) AMERICAN AUTO AND RADIO MFG. CO. - PAT. 1-4-10 / WHOLESALE DISTRIBUTORS - RADIO - KANSAS CITY, MO. - 1416-18 MCGEE ST. PAT. 1-4-10
(2.) DAYTON TIRES / CAPPER AUTO SUPPLY CO. - TOPEKA, KANSAS - PAT. 1-4-10
(3.) GARDNER - NOBEL CO. SPORTING GOODS - SARASOTA, FLORIDA / AT THE SIGN OF THE TARPON - - Pitted.
(4.) FORD - FORDSON SALES & SERVICE - SCOTIA, NEBR. - PAT. 1-4-10 / SCOTIA AUTO CO, - MR. & MRS. J. E. DURYEA PROPRIETORS
(5.) WEBSTER PLBG. & HTG. CENTRRALIA, ILLS / REPAIR WORK GIVEN IMMEDIATE ATTENTION - PHONE MAIN 43 - PAT. 1-4-10
(6.) CONDIE - BRAY - ST. LOUIS & KANSAS CITY - PAT. 1-4-10 / GLASS & PAINTS
(7.) OMC SUPPLY CO. - RADIO DISTRIBUTORS - 138 NINTH ST. PITRTSBURGH, PA - PAT. 1-4-10 / HEATH'S RADIANT CONDENSERS - BUILT LIKE A WATCH

PiCs Lots 753 thru 761

Adjustable Wrenches - Group Six (lots 762 thru 777)

0762. Marked only with an unidentified logo - - 6" Clyburn Spanner type adjustable nut wrench. Scarce small size. Good++. (not listed, no info found)

0763. STEPHENS WRENCH / PAT'D DEC 21, 09 - - 5.25" rotating head open end wrench with 5/16" jaw insert. Patented by Harry E. Stephens of Elgin, Illinois. Good++. PAT.

0764. CHAMPION - PAT'D MARCH-15-1921 - - 8" all metal split handle quick adjust nut and pipe combination wrench. Patented by Paul John Tumulla of Chicago. Good++, spot of pitting on top of jaw, punched initials "AB". (S662) PAT

0765. WARRANTED BEST CAST STEEL / 1873 (weak markings) - - 10" plier type pipe wrench with pins between the jaws to adjust the jaw opening. Advertised as the Climax Pipe Wrench and patented on Jun. 03, 1873 by John Rigg of Cleveland, Ohio. Good++, the pins that adjust the jaw opening are sheared off. (not listed) PAT

0766. "STERLING" NO. 40 (with a "M" in a diamond logo) / MANFD BY FRANK MOSSBERG CO - ATTLEBORO, MASS. - PAT. NOV 13, '00 - MAR 11, 'O2 - PAT. APPLIED FOR - - 9" like Sterling No. 4 but with oval handle, marked on upper jaw variation. Scarce Mossberg wrench. Good+ with some edge dings, minor corrosion. (S874)

0767. Unmarked - - 12" combination rack type quick adjust nut and pipe wrench with lever to tighten the jaws, hammer, nail claw, screwdriver and wire cutter. Advertised as Tritt's Lambert Patent by Edward C. Tritt of Union City, Indiana. Patent was issued to Charles M. Lambert of Darke County, Ohio on Nov, 4, 1902. Good++, no patina. (S806) PAT

0768. LAKE SUPERIOR WRENCH CO - SAULT STE MARIE, MICHIGAN - - 17.5" self adjusting nut and pipe wrench. Patented 9-7-1909 by William Hilliard Munro of Sault Ste. Marie, Ontario, Canada and 10-4-1910 by John Boulieu of Sault Ste. Marie, Mich. Good++. (S362) PAT and PAT

0769. H. T. CO. - C & M - 917 - - 15" Clyburn Spanner type adjustable nut wrench. Good++ with engraved initials "C.R.W.P.".

0770. KWIKSET - A. G. PIPE PAT SEP 7, 26 - - 12" quick adjust rack type pipe wrench with a lever that controls the upper jaw. Patented by Carl, Emil, and Sigfred Bjornson from Bentley, Alberta, Canada. The A. and G. stands for Joe Adams and Archie Grey of Marshalltown, Iowa. Good with light pitting. (S686) PAT.

0771. DUDLY TOOL CO - MEMOMINEE, MICH. - - 12" all metal double jaw adjustable automotive type nut and alligator pipe wrench. Design patents were issued to Albert Dudly of Menominee, Michigan on AUG, 6, 1901 and DEC. 10, 1901. Good++ with stamped initials "PP". (S57) PAT. and PAT.

0772. THE GEM - - 11" all metal double jaw automotive type adjustable wrench with nut and alligator type pipe wrench jaws and a tire tool end. Good with hammer dings, worm is free but the jaw is stuck. (S58)

0773. Unmarked - - 12" three piece screw adjust pipe wrench. May be shop made. Good++. (not listed)

0774. NO 2 - D.R.G.M. - - 12" well built lever and rack type quick adjust combination nut and pipe wrench with a sliding bar for pipe or nut wrench jaws. Good++. (similar to S767)

0775. J. CASPERS PAT MAY 6, 13 / LANCASTER, WIS. - - 13" plier type horseshoe caulk wrench. Patented by Joseph Caspers of Lancaster, Wisc. Good, over cleaned, some light pitting. (S885) PAT.

0776. COMO WRENCH CO. - CHICAGO U.S.A. / DROP FORGED - - 13" unique screw adjust pipe wrench consisting of only three parts with a slotted threaded upper jaw that fits over the wrench handle. Patented by Joseph Anthony Schlehr of Chicago on Oct. 14, 1913. Good with dings and nicks, (S589) PAT.

0777. 14" MAGMUM PIPE WRENCH / 14" MAGNUM TOOL CO - PAT PEND - - 13.5" self adjust wrench with a pivoting, spring loaded upper jaw that can be set to four different notches on the handle. Patented by Carlos V. St. Claire, San Bernardino, CA. Also found with additional markings "Muesco - Houston, Texas". Good++. (S335) PAT.

PiCs Lots 762 thru 777

Kitchen and Household Antiques (lots 778 thru 786)

0778. PAT. NO. 2070773 - COOLERATOR THE AIR CONDITIONED REFRIGATOR - THE COOLERATOR COMPANY - DULUTH, MINNESOTA - - 11.5" advertising/promotional wooden handled special ice pick to separate and hold square ice cubes. Patented was granted on Feb. 16, 1937 to William F. Arndt and John H. Ganzer of Duluth, Minn. and assigned to the Coolerator Co. Excellent PAT.

0779. ASBESTOS 72-B SAD IRON - MADE IN U.S.A - - Three cast sad irons with one handle plus two unmarked sad irons. Handle is rusty, not cleaned.

0780. ASBESTOS 72-B SAD IRON - MADE IN U.S.A - - Three cast sad irons with one handle. Handle is Excellent with plated finish.

0781. Marked only "16" (for 16 pounds) - - 9" tailor's sad iron. Heavy cast iron with decorative twisted handle. Excellent.

0782. Marked only with a cutout "C" - - 5" miniature cast iron sad iron trivet One broken piece in cutout, otherwise Excellent.

0783. DOVER SAD IRON - 602 - U.S.A. - - 3.25" miniature toy sad iron complete with handle. Good++.

0784. THE CLEVELAND FOUNDRY CO. - - 6" cast iron sad iron trivet. Excellent.

0785. CARBO DIAMOND - - 8.5" bench mounted hand cranked grinder with gear and chain mechanism. Excellent with original black finish.

0786. MOOSEHEAD BEER - CANADIAN LAGER (with large moose head logo) - - 18" wooden dovetailed box with a lid that doubles has a checker board. Good++.

PiCs Lots 778 thru 786

Adjustable Wrenches - Group Six (lots 787 thru 805)

0787. A. G. COES & CO. - WORCESTER MASS / steam engine governor logo with 5-2-1871 and 12-28-1875 patent dates) - - 12" Coes wooden handled Jog bar type. Good+ with stamped initials "B & F". (HP22) PAT. and PAT.

0788. BUFFUM TOOL CO (with two Swastika logos) / LOUISIANA, MO -10 IN - - 10" curved handled Crescent type wrench. Scarce brand Crescent in Good++ condition.

0789. COMO WRENCH CO. - ROCKFORD, ILL - PAT. OCT. 14, '13 / DROP FORGED - - 10" unique screw adjust pipe wrench consisting of only three parts with a slotted threaded upper jaw that fits over the wrench handle. Also found marked Chicago vs. Rockford. Patented by Joseph Anthony Schlehr of Chicago. Good++. (S589) PAT.

0790. 10 - MARTOR TOOL - GERMANY - - 9.5" Stillson type pipe wrench with a lever that fine adjusts the upper jaw. Similar to the Eagle Grip pipe wrench (see Lot 791 below). Good++ with plated finish. (S772)

0791. 8 - MID AMERICA INC. - EAGLE GRIP - PATENT NO. 2691317 - OMAHA, NEBR. / 1/8 TO 3/4 PIPE - - 8" Stillson type pipe wrench with a novel jaw tightening lever. Patent was issued to Ernest T. Olson of Oshkosh, Nebraska on 10-12-1954. Scarce size. Excellent with plated finish. (S598) PAT.

0792. BRAUNSDORF MUELLER CO. - PAT APPL'D FOR / DUPLEX - ELIZABETH, NJ - - 9" Crescent type wrench with a pivoting head with wing nut that sets the head at different angles. Good++ except that one wing of the wing nut is broken off. (S317, patent not found)

0793. WHIZ-10 IN. - PAT. PEND. - - 10" quick adjust wrench with serrated straight jaws. Lower jaw is adjusted by depressing a lever on the edge of the wrench. Looks fairly modern but I have never seen one before. Good++. (not listed, patent not found)

0794. POWERGRIP TOOL CO. - MOUNTAIN AIR, NEW MEXICO - PAT. PENDING. - - 9.5" lever quick adjust with rack teeth. Only New Mexico made collectible wrench? Similar wrench also made in Shawnee, OK. NM. Patented by Charles D. Daniels of Mountainair, New Mexico on Oct. 31, 1944. Good with some pitting. (S709) PAT

0795. 8" UNIVERSAL. (etc.) / UNIVERSAL WRENCH CO. - DETROIT - WINDSOR - PATENTED 6-3-19 - 7-22-19 - - 8" Crescent type with a lever to release the adjusting jaw to allow for a ratcheting action. Patented June 3, 1919 by Roland John Statham of Vancouver, British Columbia Canada. The July 22, 1919 patent has not been found. Good+ with some spots of pitting. (S530T) PAT

0796. "FATKIN" PAT NOV 27, 94 - FATKIN MFG CO NY - - 9.75" different screw adjust pipe wrench with pivoting lower jaw. Advertised as "The Defender". Excellent. (S599) PAT.

0797. No. 1 - BULLARD WRENCH / PAT OCT. 27, '03 - - 9.5" self adjusting wrench with spring loaded pivoting upper and lower jaws. Mfg. by the Bullard Automatic Wrench Co. of Providence, Rhode Island under patents issued to Frank Bullard of Los Angeles, CA. on July 7,1903 PAT. and Oct. 27, 1903. PAT. Good++. (S659)

0798. THE J. L. TAYLOR PIPE & WRENCH PAT'D - C. H. REDMAN & CO. SOLE M'F'GR - DEC 1, 1891 NEWARK, NJ - - 11.5" heavy duty lever release quick adjust with rack teeth on shaft. Patented by James Taylor of Memphis, Tennessee. Good, lower jaw insert is missing. (S558) PAT.

0799. PAWOOD MADE IN USA PAT. PEND. - ARMCO PRODUCTS (in oval logo) - NEW YORK / AUTOMATIC BALL BEARING, (etc.) - - 9" self adjust nut wrench. Rare wrench in excellent condition. (unlisted, no info)

0800. LEVER WRENCH CO - DULUTH, MINN / HEIMBACK PATENT 1915 - - 8" quick adjust nut wrench with lever and rack teeth. Patented 6-8-1915 by Alton Heimbach of Duluth. Smaller size than normally seen. Good with some pitting. (S308) PAT.

0801. ANY ANGLE WRENCH - PATENT 1916 - LIMA., O. USA / DROP FORGED STEEL - - 8.5" Crescent type with an adjustable angle head. Mfg. by Atco Wrench Co. and patented by Ramson Bovee 11-21-1916. Good+ with some spots with pitting. (S311) PAT.

0802. THE ANDERSON TURN-MORE WRENCH - PAT OCT 30, 1906THE ANDERSON WRENCH CO. PORTLAND, CONN. - - 8.25" fabricated sheet metal body with forged steel Crescent type head with a sliding collar to adjust the angle of the head. There are two or three different mfg. of this wrench. Patented by John Anderson of Portland, Conn. Good++. (S313) PAT.

0803. Can't read markings because of pitting - - 10.5" Atlas pipe wrench with a moveable upper jaw that can be adjusted to three different positions. Patented May 15, 1888 by Robert Copland of Eureka, Calif. and made in San Francisco, Calif. and New York, NY. Only the panel with the markings is pitted rest is excellent. Good buy if you need parts. (S655) PAT.

0804. 92-8 UTICA TOOLS - APT. APL'D FOR / ALLOY - UTICA - STEEL - - 8" Crescent type with a jaw locking lever. Good++ with plated finish.

0805. CRAFT 8 IN. / THE CRAFTSMAN TOOL CO. CONNEAUT, O. - PAT NOV 1907 - - 8.75" roller jaw adjustable pipe wrench, open gear variant. Patented by George Heckling of Cleveland, Ohio. Good++. (S663, 664) PAT.

PiCs Lots 787 thru 805

Farm Equipment Type Wrenches - Group Five (lots 806 thru 823)

0806. G. A. KELLY PLOW CO - No 4 - - 11.5" with hammer head. Excellent. (R1-277)

0807. C338 (P. P. Mast, later Superior Drill Co - Springfield, Ohio, later Am. Seeding Mach. Co.) - - 9" with hammer head. Good+. (R1-314, R1-446, R1-16)

0808. VB624 - IHC logo) - - 10.75" binder crank and wrench. Numbers and logo markings indented variant. Pitted.

0809. 1904 (orphan) - - 8.5" with six wrench openings, three holes, and ribs. Reverse side is flat. Pitting., weak markings. (not listed, no info found)

0810. RITTER 1 - 2 - 3 - 4 (same markings both sides) - - 6.75". Non magnetic bronze like metal. Excellent.

0811. Shares / N167 (Janesville Machine Co.) - - 5.5". Pitting. (R1-265)

0812. W7 (Blizzard Mfg. Co. - Canton, Ohio) - - 7.25" doe-s-wrench. Good++. (R1-56, R2-36)

0813. REMINGTON - - 6". Three openings with hang hole variation, Excellent. (R1-393)

0814. 1126A (Moline Plow Co) - - 6.5" by 10.5"" tee socket wrench. Good++. (R1-332)

0815. Unmarked (oddball orphan) - - 6.75" oddball with five openings and three cutout sections. Some pitting. (R1-504)

0816. 31 (John Deere / Hart-Carter / Nichols & Shepard-Oliver) - - 8". Marked on right side variation. Came with Hart-Carter threshing machine grain weighers. Also listed in Nichols & Shepard-Oliver threshing machine parts books for threshing machines that used Hart-Carter weighers. Good++ with short jaw crack. (D6)

0817. PERLICK TAP WRENCH - - 7.5" malleable odd spanner type. Beer dispensing apparatus wrench? Good++. (not listed).

0818. OK CHAMPION / 59 (Champion Potato Co., Hammond, Ind.) - - 8.25". Pitted. (R1-94)

0819. A196 - DEERE (in cutout letters) - - 8" CUTOUT . Part number on the right above the open end. Pitted, can't read all the part number. (D157, R1-131)

0820. E39 - IRON AGE (cutout letters) (A. B. Farquhar, York, PA and Bateman Mfg. Grenloch, NJ) - - 8.75" CUTOUT with hammer head. Rusty, not cleaned. (R1-260)

0821. A196 - DEERE (in cutout letters) - - 8" CUTOUT . Part number on the right above the open end. Pitted, can't read all the part number. (D157, R1-131)

0822. PLANET JR. (in cutout letters) / 3 - (S. A. Allen & Co. - Philadelphia, Penn.) - - 6.5". cutout with small hammer head. Good++. (R1-380)

0823. C9 - IRON AGE (in cutout letters) (A. B. Farquhar, York, PA and Bateman Mfg. Grenloch, NJ) - - 6.5" CUTOUT with small hammer head. Larger 9/16" square box end variant. Good++. (R!-260)

PiCs Lots 806 thru 823

Orphans, Oddballs and Miscellaneous Wrenches, Etc. (lots 824 thru 844)

0824. Lot of nine: Salesmen sample carrying and display cases that King Herrington used to display his wrench, wire tool and barb wire collections. These empty cases will be sold choice case.

PiC and PiC Lot 824

0825. Unmarked (orphan) - - 23.5". Iron bar handle riveted to a heavy cast open end head. Good++. (not listed, no info found)

0826. Unmarked - - 13" combination tire tool? with a hammer, pry bar, open end wrench, and socket wrench. Good. (no info found)

0827. Unmarked (orphan) - - 8.75". Good+ with light pitting. (not listed, no info found)

0828. H & C / 97 (with a bee or wasp logo) (orphan) - - 11". Good+ with some dings.

0829. Unmarked - - 12" strange clamping pliers? with a valve type handle clamp. Good++. (no info found)

0830. Lot of two: Oddball Wrenches
(1.) Unmarked - - 7" four prong barrel bung wrench. Excellent. (not listed, no info found)
(2.) Unmarked (orphan) malleable oddball. Excellent.

0831. "REXOS" - 5/8 / PATENT 9634/1910 - - 10.75" single open ended wrench with a different hinged jaw. Excellent. (not listed, no info found)

0832. Unmarked (looks like there was a stenciled on label with a patent date?) - - 34" holding clamp with two Vise-Grip like pliers welded to a fixture with four swivel joints.

0833. LUCKY 'LEVEN - CHICAGO - PAT. - MAR. 15-21 - - 9" large malleable cast dog bone wrench with eleven wrench openings. Advertised as replacing seven wrenches used on Fords (for hubcaps, sparkplugs, cones, etc.) and manufactured by M. P. Wessling of Chicago. Design patent was issued to Cullen C. Evans of Los Angeles, Calf. on Mar. 15, 1921. Good. (not listed) PAT

0834. STADCO NO. 21 / MADE IN USA - - 7.75". Malleable dog bone type wrench. Good+.

0835. STADCO NO. 21 / MADE IN USA - - 7.75". Malleable dog bone type wrench. Good+.

0836. 478F (orphan) - - 4" by 10" tee handled square socket wrench. Good++. (not listed, no info found)

0837. ELKHART SPANER TOOL / ELKHART BRASS MFT. CO. INC. - - 12" fireman's combination tool with hose spanner wrench, pry bar, etc. Good+.

PiCs Lots 825 thru 837

0838. 1294 (in bold, high relief letters) (orphan) - - 18" hex socket by open end. Good++. (not listed, no info)

0839. TRIMO TRADEMARK BASIN WRENCH - PAT. APPL'D FOR / ("D" in a shield logo) - - 9.75" adjustable tee handled basin wrench. Good+ with weak markings. (S92, patent not found)

0840. BUZZELL'S PAT. OCT. 31, 76 - - 9.5" adjustable tee handled basin wrench. Patented by George H. Buzzell of Boston, Mass. Good++. (S89) PAT.

0841. LOVE MFG. CO. / ROCKFORD ILLS / PAT JULY 6, 1897 - - 12.25" tong type tool made especially for gripping windmill pump rods. Patent granted to Martin M. Billmire of Ashton, IL. These work great for gripping any round stock, I keep two in my tool box. Good++. PAT.

0842. 95242 / OCS (orphan) - - 15.75" heavy single open ended wrench. Good+ with minor dings. (not listed, no info found)

0843. GIFFORD PAT'D JUNE 13, 99 - - 13.25" screw adjust strap wrench. Patent was granted to Jireih C. Gifford of Cambridge, Mass. Excellent. (S628, first one I've seen) PAT

0844. 16367 with a Maltase cross logo (orphan) - - 12.5" extra heavy single open ended wrench. Excellent. (not listed, no info found)

0845. WARNOCK / PAT JUNE 5 1900 - WORCESTER MASS - - 11.25" malleable strap wrench. Wrench is in Excellent condition with large bold markings. Patented by Amos W. Warnock of Boston, Mass. (S139) PAT.

0846. Unmarked - -11" malleable two headed pliers or tong like tool. Excellent. (not listed, no info found).

PiCs Lots 838 thru 846

Choice Box Lots (will be sold choice item from each lot)

Choice Box 001: Lot of Six: Farm Type Wrenches
(1.) STERLING M'F'G. CO. - D127 / STERLING ILL. - C - - 12" with large striking lettering. Good++. (R1-439)
(2.) B573 (American Seeding Machine Co, originally Superior Drill Co. - Springfield, Ohio) - - 8.5". Good++. (R1-446, R1-16)
(3.) 11858-DA (IHC) - - 5.5" flat steel hook spanner for Farmall tractor water pumps. No IHC logo variation. Good++.
(4.) FULLER & JOHNSON / 2P30 - - 9". One square box opening variant. Good+ with some pitting. (R1-191)
(5.) D239 (Kingman Plow Co - Peoria, Illinois) - - 9.75" different than the Rock Island wrench D239 shown in Rock Island parts books and at R1-400. Good. (R3-123)

Choice Box 002: Lot of Six:: Wood Handled Monkey Wrenches
(1.) GIRARD WRENCH MFG CO - GIRARD, PA USA - - 6". Good+.
(2.) BEMIS & CALL H & T CO. - SPRINGFIELD, MASS USA - - 15" with four ring adjusting sleeve variant. Good++, tight handle crack.
(3.) BEMIS & CALL - - 16" combination nut and pipe wrench with long hex adjusting nut. Excellent except for tight handle crack.
(4.) BEMIS & CALL - - 12" with short hex adjusting nut. Good with dings.
(5.) BEMIS & CALL H & T CO. - SPRINGFIELD, MASS USA . Bemis & Call logo - - 10" with three ring adjusting sleeve variant. Good+ with some edge dings.

PiCs Lots CB 1 and 2

Choice Box 003: Lot of Six: Farm Type Wrenches:
(1.) EMERSON - - 10". Good++.
(2.) <M-H> SPARK PLUG WRENCH 202783M1 / MADE IN CANADA - - 10". Excellent. (R1-312)
(3.) 90257 (Delco) - SPARK PLUG - GEN. NUT / CYLINDER STUD - BATTERY NUT - - 7.75".
(4.) 95095 (Delco) - CYLINDER NUT / CONNECTING ROD SCREW - 6 - - 8.25".
(5.) 90258 (Delco) - CONN. ROD NUT / CYL. HEAD - COVER PLATE - 3 - - 6.75". Different style than No. 6 below. Excellent.
(6.) 90258 (Delco) - CONN. ROD NUT / CYL. HEAD - COVER PLATE - 3 - - 7". Different style than No. 5 above.

Choice Box 004: Lot of Seven: Misc. Wrenches
(1.) Marked only "56" (orphan) - - 6.5" hook spanner by square box end.
(2.) 25A5231 (orphan) - - 5.25" offset double box ended.
(3.) 38051 (Maytag) - - 5.5" handled hex socket. socket has been ground. (R1-317)
(4.) X6 (or 9X) (orphan) - - 6" double open ended.
(5.) TAPPET ADJUSTING WRENCH - SCREW AND NUT - - 8".
(6.) DASCO / CHROME MOLYBDENUM STEEL - - 8.75" forged double open ended.
(7.) 10465CX (IHC logo) - - 9" cream separator wrench and screwdriver. Good+.

Choice Box 005: Lot of Six: Farm Type Wrenches
(1.) 44 (Brown-Manly Plow Co. - Malta, Ohio) - - 8.25". Good+. (R1-66)
(2.) C338 (P. P. Mast, later Superior Drill Co - Springfield, Ohio, later Am. Seeding Mach. Co.) - - 9" with hammer head. Pitted. (R1-314, R1-446, R1-16)
(3.) <M-H> Z435 - -8" without hang hole and one indented dot on front and one raised dot on reverse variation. Good++. (R1-312)
(4.) O (JD Tower & Sons - Mendota, Illinois) - - 5.75" by 8.25" Tee wrench with square opening variant. Some pitting. (variant not in Rathbone).
(5.) 950C (IHC logo) - - 6.25" cream separator wrench, with keyhole variation. Good++.
(6.) 1300C (1300.C variation) (IHC logo) - - 9.5" cream separator wrench. Good+, some edge dings.

PiCs Lots CB 3 thru 5

Choice Box 006: Lot of Fourteen: Blacksmith's, Ferrier's and Carpenter's Nippers
(1.) KEEN KUTTER (older style block letters) - - 14".
(2.) Unmarked - - 12" with wire cutter, nail claw and screwdriver. Nail claw is broken.
(3.) HELLER BROS. CO. with horse logo - - 12.25" hoof paring nippers.
(4.) DASCO 312 - - 12". Good++.
(5.) Unmarked - - 12.25" - - with wire cutter, nail claw and screwdriver.
(6.) Unmarked - - 12" - - with wire cutter, nail claw and screwdriver/ Pitting.
(7.) P. S. & W. CO. (Peck, Stow & Wilcox) - MADE IN U.S.A. - - 10" with wire cutter, nail claw, screwdriver and double hammer heads.
(8.) H. D. S. & CO. (with a "S" in a circle logo) (H. D. Smith &. Co. - Plantsville, CT) - PAT. AUG, 14, 1900 AND PAT. APPLIED FOR - - 10' with wire cutter, nail claw, screwdriver and double hammer heads. Good++. PAT.
(9.) RICHCON - - 10" with wire cutter, nail claw and screwdriver.
(10.) H. D. S. & CO. (with a "S" in a circle logo) (H. D. Smith &. Co. - Plantsville, Conn.) - -10" with wire cutter, nail claw and screwdriver. Poor with severe pitting.
(11.) HELLER BROS. CO. U.S.A. with horse logo - - 8.5" with wire cutter, nail claw and screwdriver.
(12.) Can't read markings - - 6.75" with screwdriver ends. Pitted.
(13.) HIBBARDS TRUE VALUE - - 8". with nail claw. Pitting.
(14.) KEEN KUTTER LOGO / A R G (owner's id) - - 6" with wire cutter, nail claw and screwdriver.

PiCs Lot CB 6

Choice Box 007: Lot of: Seven: Combination Fencing Pliers
(1.) LAKESIDE (Lakeside was a Montgomery Ward brand) - - 10" with double hammers. Has some of the original nickel plating.
(2.) FULTON (the Fulton brand was used by both The United Hardware & Tool Corp. of New York and Sears & Roebuck) - - 10" with single hammer.
(3.) PAT. 1890 (can't read rest of the markings) - -10.5" with double hammers, Some pitting.
(4.) Unmarked - - 9.5 with different style double hammers.
(5.) Can't read markings - - 10" with double hammers. Pitting.
(6.) Unmarked - - 10.75" with double hammers.
(7.) ??? HDW CO. PAT 1900 (can't read rest of the markings) - - 11" with double hammers. Pitting.

Choice Box 008: Lot of: Seven: Combination Fencing Pliers
(1.) FULTON (the Fulton brand was used by both The United Hardware & Tool Corp. of New York and Sears & Roebuck) - -10" with single hammer head.
(2.) Unmarked - -11" with two hammer heads.
(3.) Weak markings - - 10" with two hammer heads. - -
(4.) Unmarked (Utica?) - -10" with two hammers and round handles for twisting wire, (see Smith No. 44)
(5.) UTICA NO. 9 - - 10" with two hammers.
(6.) BRIDGE TOOL CO. ST. LOUIS (an E. C. Simmons Hardware Co. brand) - - 10" with grooved double hammer heads. (Good++)
(7.) BERNARD'S PAT. JULY 19. 1892 - SEP. 25, 1894 - Etc. - - 9" with side cutter and single hammer head. (Smith No. 67) PAT.

Choice Box 009: Lot of: Seven: Combination Pliers. Most are foreign made, (See Smith No. 61)
(1.) Poor stamping, can't read markings - - 8.5" with two hammers and a nail claw.
(2.) Can't read all the markings - - 9" with two hammers and two nail claws.
(3.) BRUTSCHIN - GARANTI - LAUFENBURG - BESTE QUALITAT, ETC. - - 9.25" with two hammers and nail claw.
(4.) N. ALBERT etc. - - 9" with two hammers and nail claw.
(5.) MADE IN SHEFFIELD ENGLAND - - 8" with hammer and staple puller ends,. Unusual small size fencing pliers.
(6.) ABR. MULLER - - 8.5" with two hammers and screwdriver end. (S1093)
(7.) A. F. & CO. - 8Z - - 8.5" with two hammer heads.

PiCs Lots CB 7 thru 9

Choice Box 010: Lot of Six: Cronk Type Fencing Pliers:
(1.) LODI - PAT. SEP. 25, 94 - NOV. 6, 1900 - - 10.5" with wire cutters. Patents were issued to William A. Bernard of New Haven, Conn. PAT.
(2.) BUTTON PLIERS - - 10" with three wire cutters. Good++.
(3.) CRONK? (weak markings) - -10.75". (like Smith No. 52).
(4.) CRONK - -11" duckbill variation. (Smith No. 51)
(5.) CRONK - -10". (Smith No. 53)
(6.) UTICA TOOLS 2607 10 - UTICA, N,Y, U,S,A, - - 10.5". Good++.

Choice Box 011: Lot of Six: Cronk Type Fencing Pliers:
(1.) Unmarked - - 8.25".Thin nose, plain handles. (like Smith No. 53)
(2.) C???K MFG. CO. (can't read all markings, CRONK?) - - 8" with wire cutters. (like Smith No, 57).
(3.) FARMER BOY - - 6.5" with wire cutters.
(4.) FARMER BOY ?? & CO. (some markings top weak to read) - - 6.5" with wire cutters. Different style jaws than No. 3 above.
(5.) Markings too weak to read - - 6.5" small size with wire cutters.
(6.) KEEN KUTTER - PATD FEB, 5, 01 - - 9.75". Patent was issued to Sanford S. Vaughan and William L. Peterson and assigned to Vaughan & Bushnell Mfg. Co. - Chicago, IL. Probably made by Vaughan & Bushnell for E. C. Simmons Hdw. Co. PAT.

Choice Box 012: Lot of Six: Cronk Type Fencing Pliers:
(1.) J. M. KING & CO. WATERFORD, N.J. - BUTTON PLIERS - - 10.25". Good++.
(2.) PATD FEB, 5, 01 - - 10". See patent info for No. 11-6 above. PAT.
(3.) KEEN KUTTER - PATD FEB, 5, 01 - - 9.75". Probably made by Vaughan & Bushnell for E. C. Simmons. See patent info for No. 11-6 above. PAT.
(4.) CRONK - - 8.5". Thick nose, knurled handles. (Smith No. 52)
(5.) CRONK - - 8.5".Thin nose, plain handles. (Smith No. 53)
(6.) Unmarked - - 8.5".

PiCs Lots CB 10 thru 12

Choice Box 013: Lot of Nine: Eagle Claw Wrenches (different style, markings, sizes, manufactures) patented Feb. 8, 1912 by Joseph A. Schlehr of Chicago, Illinois PAT.
(1.) EAGLE CLAW WRENCH - M. T. CO. (Mechanics Tool Co.) - ROCKFORD, ILL. - PAT FEB 6, 12 / DASCO - - 7.25". IL. Excellent.
(2.) MECHANICS TOOL EAGLE CLAW WRENCH - PAT. FEB - ROCKFORD, ILL - - 7.5". Thicker head than the others listed. Minor pitting.
(3.) MECHANICS TOOL CO. EAGLE CLAW WRENCH -ROCKFORD, ILL / DASCO (weak markings) - - 7.5". Good.
(4.) MECHANICS TOOL CO. EAGLE CLAW WRENCH - PAT. FEB. 6-1912 - ROCKFORD, ILL - - 7.25". Different with slot in lower jaw. Good++.
(5.) EAGLE CLAW WRENCH CO. - CHICAGO U.S.A. - PAT'D FEB. 6, 1912 (weak markings) - - 8".
(6.) EAGLE CLAW WRENCH CO. - CHICAGO U.S.A. - PAT'D FEB. 6, 1912 - - 10.75".
(7.) No. 301 - EAGLE CLAW WRENCH - M. T. CO. (Mechanics Tool Co.) - ROCKFORD, ILL. - PAT FEB 6, 12 / DASCO - - 7.5". "Parrot Head" style with DASCO and the model number imprints. Ex.
(8.) EAGLE CLAW WRENCH - M. T. CO. (Mechanics Tool Co.) - ROCKFORD, ILL. - PAT FEB 6, 12 / DASCO - - 7.25". "Parrot Head" style.
(9.) EAGLE CLAW WRENCH CO. - CHICAGO U.S.A. - PAT'D FEB. 6, 1912 - - 10". "Parrot Head" style. some edge dings.

Choice Box 014: Lot of Seven: Hjorth Lightning and Eagle Claw Parrot Head Type Plier Wrenches (Hjorth advertised as the "Lightning Wrench".
(1.) WM. HJORTH JAMESTOWN N.Y. - PAT SEP. 8, 1903 (weak markings, not all readable" - - 12.5". This is the improved version with replaceable lower jaw inserts. . Patented by Arthur W. Hjorth of Jamestown. Good ++. (Smith No. 75, not in Schulz, C168) PAT.
(2.) WM. HJORTH JAMESTOWN N.Y. - PAT DEC 15, 96 - - 12". Combination plier wrench tool with a wire cutter, screwdriver, and tack puller. This is the earlier version without replaceable lower jaw inserts. Patented by John F. Tiner of Sutherland Springs, Texas. Good ++. (this earlier version is not in Smith's, see Smith No. 75, not in Schulz, C168) PAT.
(3.) WM. HJORTH JAMESTOWN N.Y. - PAT SEP. 8, 1903 (weak markings, not readable" - - 9". Smaller version of the improved version with replaceable lower jaw inserts. See No. 1 above for patent information. Some minor pitting. (Smith No. 75, not in Schulz, C168) PAT.
(4.) Jackson & Van Horn - Troy, O. - PAT. - Aug. 30, 1904 - - 9.25". Combination plier wrench tool with a wire cutter, screwdriver, and tack puller. Patented by William Van Horn of Piqua, Ohio. Good+. (not in Smith's, not in Schulz. C309)
(5.) Unmarked (like the Hjorth's Lightning Wrenches above) - - 8.5". Combination plier wrench tool with a wire cutter, screwdriver, and tack puller.
(6.) S. SUTTON & CO. ROCKFORD, ILL. - PAT ????? 96 (DEC 15, 1896) - ?? NEWTON - AUSTIN, TEX.(can't read all the markings) - - Lightning style combination plier wrench tool with a wire cutter and tack puller. Patent was issued Dec. 15, 1896 to John F. Tiner of Sutherland Springs, TX with three-eighths assigned to Ella J. Newton of Austin, TX. First one I have seen marked "Sutton". Good+ with some pitting. (not in Smith's, Schulz's or Cope's) PAT.
(7.) Unmarked (like the Hjorth's Lightning Wrenches above) - - 6". Rare small size. Combination plier wrench tool with a wire cutter, screwdriver, and tack puller.

Choice Box 015: Lot of Five: Misc. Pliers and Wire Cutters.
(1.) Unmarked - - 6.5" pliers with grip or tug handle (not in Smith's)
(2.) Unmarked - - 6.75" combination cobbler's or leather pliers with hammer head.
(3.) Marked only "UL" - - 8.25" combination cobbler's or leather pliers with hammer head and nail claw.
(4.) SARGENT & CO. - NEW HAVEN, CONN / - - 4.25" with two wire cutters. Plated finish, Good++.
(5.) LODI / PAT. PENDING - - 4.75" with three wire cutters.

PiCs Lots CB 13 thru 15

Choice Box 016: Lot of Six: Bernard and Bernard Type Pliers
(1.) PARAGON - W. SCHOLLHORN CO. NEW HAVEN, CONN. / BERNARD'S PAT. MAR. 17, 1914 - - 7.5" shoe button pliers with spring loaded jaws. (no side cutter version). PAT.
(2.) De VILBISS (De Vilbiss Plier Co. - Dundee, Mich.) - PAT. MAR 1, O4 - - 7" flat nose pliers with side wire cutters. Similar to the Barnard pliers but with a completely different mechanism. Bernard's March 1. 1904 patent may apply. PAT.
(3.) BEDRNARD - SCHOLLHORN CO. NEW HAVEN, CONN. 3-17-14 - PAT 4-6-15 - 7.5" shoe button pliers with spring loaded jaws and side nippers. Plated, Good++. PAT. and PAT.
(4.) BERNARD'S PAT. MAY 6, 1890 - JULY 19, 1892 - PAT. APRIL 2, 1907 - JUNE 17, 1913 (with a running dog logo marked BARNARD} / W. SCHOLLHORN CO. NEW HAVEN, CONN. - - 6.5" flat nose pliers with a side wire cutter. PAT. - PAT. - PAT - PAT.
(5.) De VILBISS (De Vilbiss Plier Co. - Dundee, Mich.) - PAT. MAR 1, O4 - - 6" flat nose pliers with side wire cutters. See the 7" version (No. 3 above) for more information. Plated. Good++.
(6.) PARAGON - CUT NO TEMPERED STEEL - BERNARD'S PAT. MAY 6, 1890 - JULT 19, 1892 / W. SCHOLLHORN CO. NEW HAVEN, CONN. - - 6.5" flat nose pliers with side wire cutters. Plated. Good++. PAT. and PAT.

Choice Box 017: Lot of Six: Bernard and Bernard Type Pliers
(1.) LODI - - PAT. SEP. 25, 94 - RE. NOV. 6, 1900 - - 5" flat nose pliers with two side wire cutters. Plated. PAT.
(2.) LODI - MADE IN U.S.A. / PAT. SEP. 25, 1894 - RE. NOV. 6, 1900 - - 5". Two side wire cutters and strange open loop jaws. Couldn't ID this one. PAT.
(3.) SARGENT - SARGENT & CO. - NEW HAVEN, CONN . - - 4.25" with two wire cutters
(4.) SARGENT - SARGENT & CO. - NEW HAVEN, CONN. - - 4.25" with two wire cutters and a handle spring. The only Bernard pliers of this type in this collection with a spring in the handle.
(5.) SARGENT - SARGENT & CO. - NEW HAVEN, CONN. - - 4.25" with two wire cutters Plated. Good++.
(6.) SARGENT - SARGENT & CO. - NEW HAVEN, CONN. - - 4.25" with two wire cutters

Choice Box 018: Lot of Six: Bernard and Bernard Type Pliers
(1.) SARGENT -GRIP SNIP - SARGENT & CO. - NEW HAVEN, CONN.- - 8.25" combination pliers and side wire cutters. Excellent with plated finish. (Smith No. 62)
(2.) Can't read markings - - 8.25" Bernard combination pliers and side wire cutters. Poor because of severe pitting. (Smith No. 62)
(3.) BERNARD - SARGENT & CO. - NEW HAVEN, CONN.- - 8.25" combination pliers and side wire cutters. Good++. (Smith No. 62)
(4.) BERNARD - SARGENT & CO. - NEW HAVEN, CONN.- - 6.5" combination pliers and wire cutters. Black finish. Good++. (Smith No. 62)
(5.) BERNARD'S PAT. MAY 6, 1890 / W. SCHOLLHORN CO. NEW HAVEN, CONN. - - 6" parallel flat jaw pliers. Plated. Excellent. PAT.
(6.) BERNARD - BERNARD'S PAT. OCT. 24, 1899 - W. SCHOLLHORN CO. NEW HAVEN, CONN. - - 6.25" end nippers. Plated. Good++. PAT.

PiCs Lots CB 16 thru 18

Choice Box 019: Lot of Twenty-Eight: Farm Wrenches (most are severely pitted)
(1.) J H CO (Johnston Harvester / Massey-Harris)
(2.) P. P. Co. / 100 (Pattee Plow Co - Monmouth, Illinois)
(3.) H911 (IHC) - - Deering pattern.
(4.) J H CO / 218 (Johnston Harvester / Massey-Harris)
(5.) Z C111 (Roderick Lean - Mansfield, Ohio)
(6.) 1059B (IHC)
(7.) Z810 (IHC)
(8.) Unmarked (orphan?)
(9.) C620 (Appleton Mfg. Co. - Batavia Ill.)
(10.) B.F. AVERY AND SONS / CHILLED PLOW CO. 66
(11.) BAILOR PLOW CO / ATCHISON KAN. C49
(12.) COLLINS PLOW CO / 124 - - with a hammer head.
(13.) Unmarked (C11 Dempster Mill Mfg. Co, - Beatrice, Neb)
(14.) P28 (IHC, earlier Plano)
(15.) Famous Ohio - J276 (Ohio Cultivator Co. Bellevue, Ohio)
(16.) 1059B (with IHC logo)
(17) SHARPLES SEPARATOR CO / TUBULAR
(18.) DEEERING (large letters) / DEERING (small letters) - - Deering pattern.
(19.) Marked only with a "B" in a Diamond logo (Badger Arnholt?) - - Deering pattern.
(20.) HE911 (IHC) - - Deering pattern.
(21.) J. I. CASE PLOW WORKS - 4105
(22.) L299 with a double diamond logo (New Idea Spreader Co. - Coldwater, Ohio)
(23.) L298 with a double diamond logo (New Idea Spreader Co. - Coldwater, Ohio)
(24.) P & O CO (IHC) - 940X / CANTON ILL
(25.) UA51 (IHC)
(26.) AJAX & / SUPERIOR (Rock Island Plow Co.)
(27) KW8 (Rock Island Plow Co)
(28.) ROCK ISLAND / R1123

PiCs Lot CB 19

Choice Box 020: Lot of Seven: Assorted Adjustable Wrenches, Pliers, Etc.
(1.) WALDEN-WORCESTER - PAT. JULY 20, 1909 - - 9". 3/4" female drive loop handled ratchet. Patent was issued to Frederick E. Walden of Worcester, Mass. Good++. PAT.
(2.) THE BILLINGS & SPENCER CO. - HARTFORD, CONN. / TREATED STEEL FORGING - 10 IN. - - Curved handle Crescent type adjustable wrench.
(3.) 10 IN Queen City - PAT. PENDING - FORGED STEEL / BERGMAN TOOL MFG. CO. - BUFFALO, NEW YORK USA - 10" curved handled Crescent type
(4.) PLI-WRENCH PAT. PEND. - WHALE TOOL CO - NEW YORK, NY - - 9.25" locking pliers with curved lower jaw with pivoting insert that resembles a pelican. Patent was issued to Ernest St. Laurence of Minneapolis, MN on Nov. 22, 1949. Good+ with punched owner's id. (S275T) PAT.
(5.) HOE CORP.- POUGHKEEPSIE, NY / PATENTED FEB 21 - 1922 - 10" - - 11" self adjust nut and pipe wrench with spring loaded jaws. Patented by Frederic Robert of Lynnbrook, Long Island, NY. Good++. (S361) PAT
(6.) WALWORTH-PARMELEE NO. 1 - PAT. 11-19-1907 / WALWORTH CO. BOSTON U.S.A. - - 11.5" newer, improved version of the Parmelee girdle type pipe wrench fitted with 3/8" segment. Patent was issued to Roy Parmelee of Chicago, ILL. Excellent. (S133) PAT.
(7.) Marked only "8" - - 8.25" gas pliers.

Choice Box 021: Lot of Eight: Garden Cultivator Type Wrenches
(1.) M123 (orphan)
(2.) R172 (IHC) - - No IHC logo variant. Weak markings.
(3.) STANDARD (Standard Garden Tool Co. - Montrose, Iowa)
(4.) E607 (orphan) - - Weak markings.
(5.) Unmarked (orphan) - - Looks like M58 and N9 wrenches
(6.) N9 / (Link belt's dogbone logo) (orphan) - - Looks like the more common M58 wrench.
(7.) M8 (orphan) - - Looks like the M58 wrench with the five missing.
(8.) 4 (A. B. Farquhar, York, PA and Bateman Mfg. Grenloch, NJ)

Choice Box 022: Lot of Eight: Garden Cultivator Type Wrenches
(1.) M58 (orphan)
(2.) 3 PLANET JR. / PLANET JR. S. L. Allen & Co. - Philadelphia, Penn.)
(3.) 10 (Empire Plow Co. - Cleveland, Ohio)
(4.) R172 with IHC logo
(5.) STANDARD (Standard Garden Tool Co. - Montrose, Iowa)
(6.) 1AA (Brown-Manly Plow Co. - Malta, Ohio)
(7.) 10 (Empire Plow Co. - Cleveland, Ohio)
(8.) M58 (orphan)

Choice Box 023: Lot of Seven: Garden Cultivator Type Wrenches
(1.) 4 / T (A. B. Farquhar, York, PA and Bateman Mfg. Grenloch, NJ) - - Marking variation.
(2.) M58 (orphan)
(3.) STANDARD (Standard Garden Tool Co. - Montrose, Iowa) - - Pitted.
(4.) 10 (Empire Plow Co. - Cleveland, Ohio)
(5.) M58 (orphan)
(6.) 1AA (Brown-Manly Plow Co. - Malta, Ohio)
(7.) 10 (Empire Plow Co. - Cleveland, Ohio)

PiCs Lots CB 20 thru 23

Choice Box 024: Lot of Ten: Misc. wrenches Including Stove Lifters, Bottle Wrenches, Railroad wrench, Etc.
(1.) "EASY" NO. 2. (H. K. Porter) - - Came with Easy Bolt Cutters.
(2.) M. KLEIN & SONS / CAT. 3146 - - 13" lineman's lag screw wrench. Excellent, like new.
(3.) SRX 33 - -8" square box end with a stove or range lid lifter?
(4.) 5024X - - 6.25" open end with a stove or range lid lifter?
(5.) OXWELD (script) - 83 - - 4.5" welding or bottle wrench.
(6.) SKELGAS - - 5.5" welding or bottle wrench.
(7.) Unmarked - -12" large hex socket with tee handle. Handle has been spot welded to socket shaft.
(8.) Three Auto Kit wrenches including two marked SEARS ECLIPSE.
(9.) N & W (Norfolk & Western Railroad) - - 15" Probably shop made By Norfolk and Western.
(10.) Unmarked - - 8" long tapered rectangular spike? Unused, like new.

Choice Box 025: Lot of Seven: Assorted Farm Wrenches
(1.) 106 (B. F. Avery - Louisville, KY and Moline Plow Co.) with C-H logo - - 8". Good+. (R1-37, R1-332)
(2.) 1126A (Moline Plow Co) - - 9" tee socket wrench. Pitted.
(3.) 95 - VULCAN PLOW CO / EVANSVILLE IND - - 7.5". Severely pitted. (R1-475)
(4.) R43 (Ruth Self Feeder Co - Halstead, KS later Parsons Self Feeder Co.- Newton, IA later Maytag Co. - Newton, IA) - - 6.5". Also shown in M. Rumely Co. Threshing Machine Parts Lists. Some pitting. (R1-405)
(5.) Z811 (McCormick, later IHC) - - 7.5". Numbers impressed, no logo variation.
(6.) M183 (Litchfield Mfg. Co., Waterloo, Iowa) - - 9". Pitted.
(7.) L140 (New Idea Spreader Co. - Coldwater, Ohio)

Choice Box 026: Lot of Seven: Assorted Farm Wrenches
(1.) Unmarked 950(McCormick / later IHC) - - 10". Pitted.
(2.) 1059B D - IHC logo - - 8.5" with six openings. Good+.
(3.) 274A (Massey-Harris) - - 8.5". Painted. (R1-311)
(4.) M.518 (Emerson-Brantingham, later Case T. M. Co.) - - 6.5" pitman wrench.
(5.) WOOD (Walter A. Wood Mower & Reaping Machine Co. - Hoosick, Falls, NY) - -11".
(6.) 90257 (Delco) - SPARK PLUG - GEN. NUT / CYLINDER STUD - BATTERY NUT (Delco) - - 8".
(7.) G70 (Madison Plow Co. later Fuller & Johnson) - - 7.5". Pitted.

PiCs Lots CB 24 thru 26

Choice Box 027: Lot of Eight: Mechanic Wrenches
(1.) Unmarked - - Single open end wrench. Probably shop made.
(2.) FAIRMOUNT-CLEVELAND - - 9" automotive type adjustable nut wrench. Adjusting nut is frozen.
(3.) WILLIAMS BROOKLYN, NY / 37 - - Excellent.
(4.) BARCALO-BUFFALO USA 7/8 - 13/16
(5.) BILLINGS & SPENCER - 2017
(6.) BUHL / 30
(7.) Marked only with a "RI" logo (Rhode Island Tool Co.?)
(8.) ARMSTRONG - 505 / 1/2

Choice Box 028: Lot of Eight: Forged Open End Mechanic's Wrenches
(1.) WESTCHESTER 73-S
(2.) HINSDALE 3/4 - 5/8
(3.) WRIGHT P 5L 19/32 OP & 5/16 USS - 11/16 OP & 3/8 USS
(4.) SUPERSLIM 3/4 AF - 5/8 AF W / MADE IN ENGLAND (TW in a circle logo)
(5.) CORNWELL 1/2 SAE - 9/16 SAE
(6.) CORNWELL 3/8 SAE - 7/16 SAE
(7.) CORNWELL 5/16 USS - 3/8 USS
(8.) CORNWELL 33 - 7 - 1/2

Choice Box 029: Lot of Six: Forged Mechanic's Wrenches
(1.) WILLIAMS (weak markings)
(2.) "H" in a diamond logo / 69 (Herbrand Co. - Fremont, OH)
(3.) WILLIAMS BROOKLYN, NY / 3
(4.) BHM logo / (Bridgeport Hardware Mfg. Co. - Bridgeport, Conn. - - Flat steel.
(5.) BARCALO-BUFFALO USA / 11/16 - 19/32
(6.) FORGED SELECT STEEL / 5/8 - 11/16

Choice Box 030: Lot of: Eight Flat Steel Wrenches. No. 1 and 2 marked LCN CLOSURES INC - PRINCETON, ILL - T-1157. Rest are no names.

PiCs Lots CB 27 thru 30

Choice Box 031: Lot of Seven: Flat Steel Farm Wrenches
(1.) GALE - -11"
(2.) GALE / DG847 - - 9".
(3.) MOSSBERG 264 (Waterloo Boy / John Deere) - - 7.25". Rusty.
(4.) Unmarked (Oliver 5415) - -10.5"
(5.) Unmarked (Oliver 5415) - -10.5"
(6.) Unmarked (Oliver 5415) - -10.5"
(7.) Unmarked (Oliver 5415) - -10.5"

Choice Box 032: Lot of Eight: Misc. Small Farm, Etc. Wrenches
(1.) 7370 -- (Empire Plow Co. - Cleveland, Ohio) - - 6.5". Marking variation with a dash after the part number.
(2.) STANDARD (Standard Garden Tool Co. - Montrose, Iowa)
(3.) 285 + (Vaile & Kimes - Dayton, Ohio)
(4.) 1893 (Dille & McGuire, Richmond, Indiana) - - 3.75" lawnmower wrench.
(5.) Marked only "K4" - - 4.5". Small cast open end with pointed end.
(6.) Unmarked (orphan)
(7.) Unmarked (P52 Whitman & Barnes) - -for Whitman & Barnes lawnmowers.
(8.) J. A. F. & E. CO. - 1 (J. A. Faye & Egan Co. - Cincinnati, Ohio)

Choice Box 033: Lot of Eight: Assorted Farm Wrenches
(1.) Unmarked K54 (New Ideal Spreader Co. - Coldwater, Ohio) - - 8.75". Some light pitting. (R1-349)
(2.) B573 (Superior Drill Co. - Springfield, Ohio, later American Seeding Machine Co.)
(3.) 1059B - IHC logo / MC logo - - Excellent.
(4.) 1E - 2E / (IHC and McD logos) (IHC part 4E) - - 9" solid handle variation.
(5.) R121 (orphan)
(6.) Z811 with IHC Logo (McCormick / IHC) - - All markings indented variation.
(7.) UTILITY - - Deering pattern. Pitted.
(8.) B573 (Superior Drill Co. - Springfield, Ohio, later American Seeding Machine Co.)

PiCs Lots CB 31 thru 33

Choice Box 034: Lot of Seven: All Metal and Wood Handle Monkey Wrenches and One Bicycle Wrench
(1.) HAYDEN JUNE 16, 80 - - 4" center screw adjust bike or pocket wrench. Applicable patent was issued to Randolph Hayden of Middletown, Conn. on June 15, 1880 not June 16 as marked on wrench. Few dings on one side, some weak markings. (not in Schulz, C161) PAT.
(2.) TRADEMARK COES (in oval) / BILLINGS - MADE IN USA (with a "B" in a triangle logo) - also marked B & O (Baltimore & Ohio RR) - - 12" all metal nut wrench. Last Coes type monkey wrench manufactured. Good+. (HP66).
(3.) P. S. & W. CO - CLEVELAND, O - USA - - 7". Wood handled. Tight handle crack,
(4.) COES WRENCH CO WORCESTER, MASS. USA / MFD UNDER L. COES PAT'S - STEEL - - 12" all metal monkey wrench. Minor dings. (HP58)
(5.) BEMIS & CALL H & T CO. - SPRINGFIELD, MASS USA - - 10" wood handled nut wrench with four ring adjusting sleeve variant. Good+.
(6.) TRADEMARK COES (in oval) - 12" / BILLINGS - MADE IN USA (with a "B" in a triangle logo) - - 12" all metal nut wrench. Last Coes type monkey wrench manufactured. Good++. (unlisted variation of HP66 with 12" marking and ridged lower jaw assembly).
(7.) BEMIS & CALL H & T CO. - SPRINGFIELD, MASS USA - - 12" short hex adjusting nut variant. Handle chip missing.

Choice Box 035: Lot of Eight: Deere, IHC, Delco Farm Wrenches
(1.) 90258 (Delco) - CONN. ROD NUT / CYL. HEAD - COVER PLATE - - 7". Slight bend.
(2.) 95095 (Delco) - CYLINDER NUT / CONNECTING ROD SCREW - - 8.25".
(3.) 90257 (Delco) - SPARK PLUG - GEN. NUT / CYLINDER STUD - BATTERY NUT - - 8".
(4.) JD50 - - 6.25". Small end on left is up. (D360)
(5.) JD50 - - 6.25". Small end on left is up. (D360)
(6.) U50 (IHC logo) - - 8.75". Number raised, IHC logo impressed.
(7.) U50 (IHC) - - 8.75". Number raised, no IHC logo variation.
(8.) UA51 - IHC logo - - 8.75". No Canada on back variation.

Choice Box 036: Lot of Six: International Harvester Cream Separator Wrenches:
(1.) 1244C (IHC logo)
(2.) 1244C (IHC logo)
(3.) 10465CX (IHC logo) - - Some light pitting.
(4.) 10466CX (IHC logo) - - Good+. (R256)
(5.) 924C (IHC logo) - - with keyhole variation
(6.) 924C (IHC logo) - - keyhole variation. Some pitting.

PiCs Lots CB 34 thru 36

Choice Box 037: Lot of Six: Wire Clamps or Crimpers also used as Wire Twisters (see Smith 146)
(1.) W. U. TEL. CO. (Western Union Telegraph Co.) - - 10.75". Good++.
(2.) M. KLEIN & SONS - KLEIN TOOLS - CHICAGO USA (with lineman climbing pole logo) - 102-3 - - 11". Excellent.
(3.) Unmarked - - 11".
(4.) Unmarked - - 10.5"
(5.) M. KLEIN & SONS - 9-RF - - 7". Marked inside of handle.
(6.) M. KLEIN & SONS - - 7". Marked inside of handle. Excellent.

Choice Box 038: Lot of Six: Wire Clamps or Crimpers also used as Wire Twisters (see Smith 146)
(1.) DICKE (inside a diamond logo) - - 10"
(2.) M. KLEIN & SON - W. U. T. CO. (Western Union Telegraph Co.) - - 10,5". Marked inside of handle. Note Son vs. Sons marking.
(3.) M. KLEIN & SONS - KLEIN TOOLS - CHICAGO USA - EST. 1857 - TRADEMARK REG (with lineman climbing pole logo) - 132-15 - - 11.5".
(4.) M. KLEIN & SONS - 9 - - 10.75" Marked inside of handle.
(5.) Unmarked - - 9". Pitted.
(6.) M. KLEIN & SONS - - 7". Marked inside of handle. Excellent.

Choice Box 039: Lot of Six: Wire Clamps or Crimpers also used as Wire Twisters (see Smith 146)
(1.) M. KLEIN & SONS - 2 - - 10.5" Marked inside of handle. Excellent.
(2.) M. KLEIN & SON - W. U. T. CO. (Western Union Telegraph Co.) - - 10". Marked inside of handle. Note Son vs. Sons marking. Good++.
(3.) M. KLEIN & SONS - - Marked on the outside of handle. 10.5". Good++.
(4.) P. S. & W. CO (Peck, Stow & Wilcox ) - FORGED STEEL - 55 - - 9.75". Good++.
(5.) S & H Co. N.Y. USA (Smith & Hemenway) - WEDISHNEVERT, JR. (owner's ID?) - - 9".
(6.) BELL SYSTEM - - 8". Good++.

PiCs Lots CB 37 thru 39

Choice Box 040: Lot of Six: Wire Crimpers and Combination Fencing Tools
(1.) M. KLEIN & SONS - KLEIN TOOLS - CHICAGO USA (with lineman climbing pole logo) (marked on side of jaw) - M. KLEIN & SONS - 132-3 (marked inside of handle) - - 10.75". Good+, not cleaned.
(2.) M. KLEIN & SONS (marked inside of handle) - - 10.75". Pitting.
(3.) Unmarked - - 11.25" crimper/twister.
(4.) THE BUFFALO - OSMUNDSON MFG CO - PAT APD FOR - PERRY IOWA - - 10" plier type fencing tool. Can't read all the markings because of hammer dings. (Smith 66)
(5.) TAIWAN - - 10.75". Pitting.
(6.) Unmarked - - 10.5". Good+.

Choice Box 041: Lot of Five: Blacksmith's, Ferrier's and Carpenter's Nippers
(1.) CAREW'S PAT WARRANTED - FORGED STEEL - MADE IN USA - 12 - - 13" older style nippers with replaceable cutter blades that slide into dovetailed slots. Patent was granted to Frank Carew of South Hadley Falls, Mass. on Sep. 13, 1870. Good+. PAT.
(2.) DASCO - - 12.25". Good++.
(3.) ENDERES F12 - - 14". Excellent.
(4.) ENDERES C10 - - 14". Excellent.
(5.) DASCO 312 - - 12.25".Excellent.

Choice Box 042: Lot of Five: Eagle Claw Pliers and one Wire Cutter
(1.) EAGLE CLAW WRENCH - M. T. CO. - ROCKFORD, ILL. - PAT FEB 6, 12 - NO. 302 - - 10". Parrot head style. Patented by Joseph A. Schlehr of Chicago, IL. Fair. PAT.
(2.) MECHANICS TOOL CO. - EAGLE CLAW WRENCH - PAT FEB 6, 1912 - ROCKFORD, ILL. - - 10.75". Good with a few dings and grind marks.
(3.) MECHANICS TOOL CO. - EAGLE CLAW WRENCH - PAT FEB 6, 1912 - ROCKFORD, ILL. - - 10.75". Good+.
(4.) MECHANICS TOOL CO. - EAGLE CLAW WRENCH - PAT FEB 6, 1912 - ROCKFORD, ILL. - - 11". Pitted, can't read all the markings,.
(5.) Unmarked - - 10.25" wire cutter?

PiCs Lots CB 40 thru 42

Choice Box 043: Lot of Five: Blacksmith's and Farrier's Tongs
(1.) Unmarked - - 20" blacksmith's pipe tongs.
(2.) Unmarked - - 22.5" blacksmith's double pick-up tongs. Pitted.
(3.) VAUGHAN & BUSHNELL MFG. CO. - - 18.5" blacksmith's flat jaw gad tongs.
(4.) VAUGHAN & BUSHNELL MFG. CO. - - 20.25" blacksmith's bolt tongs.
(5.) Unmarked - -11.25" farrier's Horseshoe nail clinch tongs.

Choice Box 044: Lot of Six: Blacksmith's, Ferrier's and Carpenter's Nippers
(1.) Enderes - - 12" nippers. Pitted.
(2.) ACME - CAPEWELL - HARTFORD USA (Capewell Horse Nail Co. - Hartford, Conn) - -12" flat nosed nippers. One blade insert is missing.
(3.) DIAMALLOY GT 28 MADE IN THE USA - -8.25" tile nippers.
(4.) V & B (Vaughan & Bushnell) - - 8" combination nippers with nail claw and screwdriver ends.
(5.) GIANT NIPPER / KRAEUTER 1850 - - 6.25".
(6.) Unmarked - - 5.25" Neat small size.

PiCs Lots CB 43 and 44

Choice Box 045: Lot of: Seven 1E/2E, 5E, Z786/Z788 International Harvester Monkey Wrenches (several variations)

Choice Box 046: Lot of: Seven 1E/2E, 5E, Z786/Z788 International Harvester Monkey Wrenches (several variations)

Choice Box 047: Lot of Nine: Six Inch all Metal Monkey Wrenches
(1.) BEMIS & CALL H & T CO. - SPRINGFIELD, MASS USA / B. F. KERR (owner's ID?) - - Grind marks.
(2.) Marked only "11" and "C" - - Lead handle scales.
(3.) COES WRENCH CO. - SPRINGFIELD, MASS. USA / BILLINGS MADE IN USA (with a "" in triangle logo) - - Good++ with stamped initials "U. F.". (HP65)
(4.) PEXTO MADE IN USA - - With patterned handle. Excellent.
(5.) Whitman & Barnes - RAILROAD SPECIAL - WARRANTED - W &B logos on handle - - Good+.
(6.) BILLINGS MADE IN USA (with a triangle logo) / B & C logo (all markings on handle shaft - - Good++.
(7.) BEMIS & CALL H & T CO. - SPRINGFIELD, MASS USA / B & C logo - - Good+.
(8.) MEADVILLE WRENCH- MEADVILLE, PA. - - Briggs style with short hex adjusting nut. Jaws are slightly sprung.
(9.) BEMIS & CALL H & T CO.- SPRINGFIELD, MASS USA / B & C logo - - Briggs type, knurled adjusting sleeve variation. Good+.

PiCs Lots CB 45 thru 47

Choice Box 048: Lot of Six: Combination Fencing Tool Pliers (all double hammer style)
(1.) S & H (Smith & Hemenway) - 1907-10 / MADE IN USA - - 10". Good++.
(2.) RED DEVIL - S & H CO. USA. (Smith & Hemenway Co.) - No. 1900 - - 10.5". Some hammer dings.
(3.) LAKESIDE (in script) - - 10". Lakeside was a Montgomery Ward brand. Good+.
(4.) Unmarked - - 10".
(5.) Unmarked - - 10".
(6.) U. T. F. & T. Co.(Utica Drop Forged & Tool Co. - UTICA, NY) - PAT. JULY 4, 06 - 1900 with Utica logo) - - 10.25". Patent not found, July 4, 1906 is not a patent issue date. Good+. (Smith 47)

Choice Box 049: Lot of Seven: Combination Fencing Tool Pliers (all double hammer style)
(1.) KEEN KUTTER (Simmons Hardware Co.) - - 10.5" Good+.
(2.) Unmarked - - 10.5" with screwdriver end. Good+.
(3.) Unmarked - - 10". Replaced pivot bolt, light pitting.
(4.) No. 1909 (with three diamond Utica Drop Forged &. Tool Co. logo) - - 10". Good+.
(5.) Marked with KeenKutter logos on handles (E. C. Simmons Hardware Co.) - - 10.5" Good+.
(6.) L. A. SAYRE CO. - NEWARK, NJ. - PAT'D APR. 7, 03 - - 10.25". Patented was granted to Herbert Cottrell of Newark, NJ for the staple gripping jaw feature. Good+. PAT.
(7.) Unmarked - - 9.75" with narrower head than usual. Good+.

Choice Box 050: Lot of Five: Combination Fencing Tool Pliers (most are single hammer/staple puller style)
(1.) FIX N SAVE - DROP FORGED - - 10.5". First time I have seen this brand, maker not known. Good+ with a grind mark.
(2.) DIAMALLOY - R510 - DULUTH - MINN. USA (with a diamond and horseshoe logo) - - 10.5". Excellent.
(3.) O. V. B. - OUR VERY BEST logo (Hibbard, Spencer, Bartlett Hardware Co. - Chicago, Illinois) - - 9.5". Unusual design with nail claw rather than staple puller. Some pitting.
(4.) VINDOBONA IMP. CO. AUSTRIA - - 10.5". Pitting.
(5.) UTICA 1932-10-1/2 - UTICA, NY USA - - 10.5". Excellent.

PiCs Lot CBs 48 thru 50

Choice Box 051: Lot of Six: All Metal Adjustable Pipe Wrenches
(1.) LARCO PAT. PEND. - "LARCO" - CHICAGO USA - - 10". Patented 9-6-1921 by Charles A. Dies of Chicago, Illinois. Good Plus. (S608) PAT.
(2.) RIDGID TRADEMARK - PAT PEND'G - E10 / THE RIDGE TOOL CO. ELYRIA O. USA E10 - - 9.75" with offset jaws.
(3.) RUGOL 8" TAIWAN / DROP FORGED JAW 8 IN - - 7.75".
(4.) GLOBEMASTER 8" 83589/8R / HEAVY DUTY PIPE WRENCH - SPAIN - - 7.5" Ridgid type. Excellent , like new.
(5.) WEST GERMANY - 8 - - 6.75" Stillson type. Good++.
(6.) 8 IN DROP FORGED / TOOL STEEL - - 7.5" Stillson type. Good+.

Choice Box 052: Lot of Six: All Metal Stillson Pattern Adjustable Pipe Wrenches
(1.) STILLSON WRENCH MFD BY HENRY & ALLEN - AUBURN, NY - 10 - - 9.5". Good++.
(2.) MILTED (in a triangle logo) - DROP FORGED STEEL - 10 - - 9.5". Good++.
(3.) MFD. THE OSWEGO TOOL CO. / OSWEGO, N.Y. USA - 10 - - 9.5:. Not cleaned, some pitting.
(4.) FULLER - FORGED / 8 - - 7.5". Good++.
(5.) LAKESIDE (in script) - GURANTEED (with an"E" in a circle in a diamond logo) - - 7". Lakeside was a Montgomery Ward brand. Excellent.
(6.) STILLSON WRENCH PATTERN - BONNEY VISE & TOOL WKS. INC. - ALLENTOWN, PA. USA - 8 - - 7". Good++.

Choice Box 053: Lot of Five: Ten Inch Wood Handle Stillson Pattern Adjustable Pipe Wrenches
(1.) TRIMO / TRIMOUNT MFG. CO. ROXBURY, MASS. - 10 - - 9.5". Tight handle cracks.
(2.) STILLSON REGESTERED TRADEMARK - WALWORTH MFG. CO - - Good++.
(3.) Marked only "10" - - 9.75:. Good++.
(4.) STILLSON WRENCH MFD. THE OSWEGO TOOL CO. / OSWEGO, N.Y. USA - 10 - - 9.5". Tight handle crack, punched owner's ID.
(5.) STILLSON WRENCH MADE BY MOORE DROP FORGING CO. - SPRINGFIELD, MASS. (with a "M" in a circle logo) - 10 - - 9.5". Good++.

Choice Box 054: Lot of Five: Ten Inch Wood Handle Stillson Pattern Adjustable Pipe Wrenches
(1.) WALWORTH / GENUINE STILLSON
(2.) STILLSON REGESTERED TRAEMARK - WALWORTH MFG. CO
(3.) GTD logo - GREENFIELD, MASS (Greenfield Tap & Die Corp.)
(4.) GTD logo - GREENFIELD, MASS (Greenfield Tap & Die Corp.) - - Handle crack.
(5.) STILLSON WRENCH - PAT AUG 1882 - WALWORTH MFG. CO. - BOSTON, MASS.

PiCs Lots CB 51 thru 54

Choice Box 055: Lot of: Ten Acme Twist Handle Monkey Wrenches - Several sizes from 5" to 13.5" and markings from different manufactures including Whitman & Barnes. Frederick Seymour's Feb. 27, 1883 patent applies. (S364) PAT
I didn't notice till after I had taken the photo but No. 5 is marked "McCORMICK HV. MGH. CO.- CHICAGO" (McCormick Harvesting Machine Co. part No. H165). Rare wrench that would date before the formation of the International Harvester Company. Listed in a parts book for McCormick's Bindlochine (used only from 1892 thru 1895) First one I have seen. Nice straight wrench with some weak markings.

Choice Box 056: Lot of: Six Hercules Loop Handle Monkey Wrenches - Several sizes from 4.25" to 9.5" and markings from different manufactures including Whitman & Barnes. Frederick Seymour's Feb. 27, 1883 patent applies. (S364) PAT

Choice Box 057: Lot of Five: Four Acme Type Twist Handle and one Hercules type Loop Handle Monkey Wrenches - All have the adjusting nut on the top side instead of the bottom as usually seen. Seymour's Feb. 27, 1883 patent applies. (S364) PAT
(1.) Whitman & Barnes Acme - - 9.5".
(2.) "ACME" MADE IN USA / Link-Belt's dogbone logo - - 9" This identifies a manufacturer of the Acme in quotation marks wrenches.
(3.) ACME (with patent date) - -8" pre Whitman & Barnes example.
(4.) GERMANY - - 7.5" with different grooved adjusting nut.
(5.) MADE IN USA (in a diamond logo) and patent date - - 8" early Hercules wrench.

PiCs Lots CB 55 thru 57

Choice Box 058: Lot of Eleven: Wooden Handled Six Inch Monkey Wrenches
(1.) MADE IN USA - WARRANTED (with a star logo) - - Unknown manufacture. Excellent, like new.
(2.) W. J. LADD - NO. 77 - NEW YORK - - Handle chip.
(3.) WHITMAN & BARNES (marked on upper jaw) - - Good++.
(4.) WHITMAN & BARNES (marked on shaft in recessed panel) - - Some hammer mushrooming.
(5.) THE H. D. SMITH & CO. "PERFECT HANDLE" - - Good+.
(6.) LAMSON & SESSIONS CO. - Cleveland, O. - - Good with some dings, weak markings.
(7.) WHITMAN & BARNES (marked on upper jaw) - - Good+.
(8.) BEMIS & CALL CO. - SPRINGFIELD, MASS - - Good++.
(9.) BONNEY HERCULES - ALLENTOWN, PA. USA (with Bonney Shield logo) - - Good++ with weak markings, only half of the Bonney Shield is readable.
(10.) BEMIS & CALL H & T CO. - SPRINGFIELD, MASS - - Excellent.
(11.) GIRARD WRENCH MFG CO - GIRARD, PA - - Poor with modified jaw ends, grind marks, weak markings. Not pictured.

Choice Box 059: Lot of Ten: Six Inch Wooden Handled Monkey Wrenches
(1.) CLEVELAND, O USA (weak markings, can't read the rest) - - Some grind marks.
(2.) RUSSWIN - REGISTERED PAT'D OCT. 30, 1900, JAN 15, 1901, FEB 26, 1901 - - H. D. Smith Perfect Handle type. Good+.
(3.) Marked only with a diamond logo and a "6" - - Good++.
(4.) GERMANY / 101/6 - - Good+.
(5.) FOREGED STEEL BAR - - Manufacture not known. Good+.
(6.) COLLINS & CO - HARTFORD U.S.A. - PAT OCT 10, 1865 - - With distinctive hex handle ferrule and extended adjusting screw support plate patented by Leander E. Smith of Southington, Conn. Good+. (S384) PAT.
(7.) STANDARD - GIRARD WRENCH - WARRENTED (weak markings) - - Areas of severe pitting.
(8.) BRIDGE TOOL CO. - ST. LOUIS USA (E. C. Simmons brand) - - Good+.
(9.) M. M. BUCK & CO. (St. Louis, Missouri hardware jobber, specialized in railroad hardware and supplies) - -Rare 6" monkey wrench with slotted adjusting screw knob. Pitting.
(10.) Whitman & Barnes (marked on upper jaw) - - Some pitting.

Choice Box 060: Lot of Thirteen: Six Inch Peck, Stow & Wilcox (Pexto) and Lamson & Sessions Co. Wood Handled Monkey Wrenches - Several variations.
(1.) KEEN KUTTTER logo - B. J. (E. C. Simmons' Black Jack brand) - PAT JAN `14, 96 - - Knife handle. Patented by Robert Cosmos Ellrich of Southington, Conn. Good. PAT
(2.) PEXTO (in an oval logo) - MADE IN USA (marked on upper jaw). - SOLID BAR - USA (on shaft) - - Knife handle. Good+.
(3.) P. S. & W. GURANTEED (with a hand holing a wrench logo) (marked in upper jaw) - P. S. & W. CO'S IDEAL PAT. JAN 24, 05 - MADE IN USA - - Knife handle with hex handle ferrule. Patented by Robert C. Ellrich of Southington, Conn. Good++. PAT
(4.) PEXTO (in an oval logo) - MADE IN USA - - Knife handle. Excellent, like new.
(5.) THE L & S CO, CLEVELAND, O. USA (The Lamson & Sessions Co.) - - All wood handle. Jaws are slightly sprung.
(6.) THE L & S CO, CLEVELAND, O. USA (The Lamson & Sessions Co.) - - All wood handle, Cross hatch knurled adjusting knob, Good+ with a tight handle crack.
(7.) P. S. & W. CO.- USA (on upper jaw) - - All wood handle. Good+.
(8.) STRONGHOLD - P. S. & W. CO.- USA (marked on shaft) - -Knife handle. Good++.
(9.) P. S. & W. CO - SOLID BAR - PAT. JAN. 14, 1896 - MADE IN USA (on the shaft) - - Knife handle. Jaws are slightly sprung.
(10.) SOLID BAR - - PAT. JAN. 14, 1896 - MADE IN USA (on the shaft) - -Knife handle. Good+.
(11.) P. S. & W. CO.- USA (on upper jaw) - - All wood handle. Tight handle crack.
(12.) PEXTO (in an oval logo) - MADE IN USA (marked on upper jaw) - - All wood handle. Handle chipped.
(13.) P. S. & W. CO.- USA (on upper jaw) - - All wood handle. Some light pitting.

Choice Box 061: Lot of Thirteen: Six Inch Wooden Handled Monkey Wrenches
(1.) THE L & S CO, CLEVELAND, O. USA (The Lamson & Sessions Co.) - - Good+.
(2.) GIRARD WRENCH MFG CO - GIRARD, PA. - - Good+
(3.) BELMONT IRON WORKS - - Good+, weak markings. (unlisted, no info found)
(4.) GERMANY - - Left handled monkey wrench with right hand instead of left hand adjusting screw threads. Good+.
(5.) GIRARD WRENCH MFG CO - GIRARD, PA. - - Good++.
(6.) Unmarked - - With grooved adjusting screw knob. Pitted.
(7.) GIRARD WRENCH MFG CO - GIRARD, PA. - - Good+
(8.) Whitman & Barnes (marked on shaft in recessed panel) - - Good+.
(9.) Marked only "6190" - - Good+.
(10.) GIRARD WRENCH MFG CO - GIRARD, PA. - - Good.
(11.) GIRARD WRENCH MFG CO - GIRARD, PA. - - Poor.
(12.) GIRARD WRENCH MFG CO - GIRARD, PA. - - Good+.
(13.) Unmarked - - Jaws are slightly sprung.

Choice Box 062: Lot of Twelve: Six Inch Wooden Handled Monkey Wrenches
(1.) Unmarked - - Pitted.
(2.) Whitman & Barnes (marked on upper jaw) - - Good+.
(3.) Unmarked - - Grooved adjusting knob. Good+.
(4.) Whitman & Barnes (marked on shaft in recessed panel) - - Good.
(5.) Whitman & Barnes (marked on shaft in recessed panel) - - Jaws slightly sprung, edge dings.
(6.) Whitman & Barnes (marked on shaft in recessed panel) - - Good+.
(7.) Whitman & Barnes (marked on upper jaw) - - Good with some pitting, handle chip.
(8.) Unmarked - - Good+.
(9.) GIRARD WRENCH MFG CO - GIRARD, PA - - Good+ with weak markings.
(10.) Marked only with a diamond logo and a "6" - - Good++.
(11.) Unmarked - - Good.
(12.) BEMIS & CALL CO. - - Poor with large chip on lower jaw, handle chip.

PiCs Lots CB 58 thru 62

Choice Box 063: Lot of Eight: Six Inch Coes Brand Wooden Handle Monkey Wrenches - Several variations, identified by Herb Page numbers.
(1.) MADE UNDER L. COE'S PAT'S - STEEL - - Knife handle. Good+. (like HP56 but with wood handle not all metal)
(2.) MADE UNDER L. COE'S PAT'S - STEEL - - Knife handle. Good+, some spots with pitting. (like HP56 but with wood handle not all metal)
(3.) MADE UNDER L. COE'S PAT'S - STEEL - - Knife handle. Good+. (like HP56 but with wood handle not all metal)
(4.) L. COES PAT'D DEC 15, 1891 - APR. 30, 1895 - - Knife handle with handle ferrule extensions. Good+. (HP50)
(5.) MADE UNDER L. COE'S PAT'S - STEEL - - Knife handle. Good+, some dings. (like HP56 but with wood handle not all metal)
(6.) MFD UNDER L. COE'S PAT'S - STEEL - - Knife handle. Good+. (like HP58 but with wood handle not all metal)
(7.) MADE UNDER L. COE'S PAT'S - STEEL - - Knife handle. Good+. (like HP56 but with wood handle not all metal)
(8.) MFD UNDER L. COE'S PAT'S - STEEL - - Knife handle. Good+. (like HP55 but with wood handle not all metal)

Choice Box 064: Lot of Eight: Six Inch Coes Brand Wooden Handle Monkey Wrenches - Several variations, identified by Herb Page numbers.
(1.) MADE UNDER L. COE'S PAT'S - STEEL - - Knife handle. Good. (like HP56 but with wood handle not all metal)
(2.) L. COES PAT'D DEC 15, 1891 - APR. 30, 1895 - - Knife handle with handle ferrule extensions. Good+. (HP50)
(3.) MADE UNDER L. COE'S PAT'S - STEEL - - Knife handle. Good+. (like HP56 but with wood handle not all metal)
(4.) COES WRENCH CO SPRINGFIELD MASS. USA - - Scarce B & C style knife type handle. Excellent, like new. (HP64)
(5.) MADE UNDER L. COE'S PAT'S - STEEL - - Knife handle. Good. (like HP56 but with wood handle not all metal)
(6.) MADE UNDER L. COE'S PAT'S - STEEL - - Knife handle. Good+. (like HP56 but with wood handle not all metal)
(7.) MFD UNDER L. COE'S PAT'S - STEEL - - Knife handle. Good+. (like HP58 but with wood handle not all metal)
(8.) COES WRENCH CO - WORCESTER, MASS / L. COES PATD. JULY 6, 1880 - JULY 8, 1884 - - 6" with knife type handles. Good+. (HP45)

Choice Box 065: Lot of Six: Six Inch Coes Brand Wooden Handle Monkey Wrenches - Several variations all with round wood handles. Identified by Herb Page numbers.
(1.) A. G. COES &MP; CO. / PATENT DEC. 28, 75 (with steam engine governor logo) - - Good+. (HP23)
(2.) A. G. COES &MP; CO. / PATENT DEC. 28, 75 (with steam engine governor logo) - - Good++. (HP23)
(3.) L. COES & CO WORCESTER, MASS / L. COES PAT'D JUNE 26, 1866 - MAR 23, 1869 (both are George Taft patents) - - First model Loring Coes made after the breakup of L. & A. G. Coes. Good+ with some weak markings. (HP26)
(4.) A. G. COES & CO. - WORCESTER, MASS / CHAMPION (with partial steam engine governor logo) - - Rare Coes in any size but especially so in a 6 incher. Herb Page's book dates this wrench from 1866 to 1869 with a price range of $100 to $125.00. (HP11)
(5.) L. COES & CO WORCESTER, MASS / L. COES PAT'D JUNE 26, 1866 - MAR 23, 1869 (both are George Taft patents) - - First model Loring Coes made after the breakup of L. & A. G. Coes. Good+ with some weak markings. (HP26)
(6.) Coes type, can't read markings - - Good.

Choice Box 066: Lot of Eight: Six Inch Wooden Handle Monkey Wrenches all from Hardware Jobbers
(1.) WINCHESTER TRADE MARK - No. 100 (on shaft) - - Knife handle. Good+ with a few edge dings.
(2.) Stiletto (double headed arrow logo) - - Knife handle. Baker & Hamilton of San Francisco, Calif. used the Stiletto brand. Good++.
(3.) LAKESIDE (block letters) - - Knife handle. Lakeside was a Montgomery Ward brand. Pitting mostly on one side of upper jaw.
(4.) REV-O-NOC - H. S. B. & CO (Hibbard, Spencer, Bartlett & Co., Chicago) (on shaft) - - Knife handle. Good++.
(5.) CRUSADER TRADEMARK - - Winchester sold the Crusader Trademark wrenches for a very short time circa 1921 till they were replaced with the Winchester Trademark wrenches. Due to the limited time they were produced they are very seldom found, much rarer than the Winchester marked wrenches. Good+ with a handle chip.
(6.) KEEN KUTTTER logo - B. J. (E. C. Simmons' Black Jack brand) - SOLID BAR (on shaft) - - Knife handle. Excellent.
(7.) SIMMONS HDW CO - NEVER SLIP - ST. LOUIS USA - - Good.
(8.) NORVELL SHAPLEIGH HARDWARE CO. St. LOUIS - DIAMOND-EDGE (with an arrow in a diamond logo - - Knife handle. Good++.

PiCs Lots CB 63 thru 66

Choice Box 067: Lot of Eight: Six Inch Stillson Pattern Wood Handled Pipe Wrenches
(1.) TRIMO - PAT'D 1889 97.- - With U-shaped adjusting nut guards. Patents issued to John H. Vinton of Boston, Mass. Good++. PAT and PAT
(2.) WALWORTH / STILLSON - - Good++.
(3.) GURANTEED - USA - - Good++.
(4.) J. P. DANIELSON CO. INC. - JAMESTOWN, N.Y. MADE IN USA - - Good++
(5.) STILLSON WRENCH - MFD. OSWEGO TOOL CO. - OSWEGO, N.Y. USA - - Some spots of light pitting.
(6.) STILLSON WRENCH - MFD. OSWEGO TOOL CO. - OSWEGO, N.Y. USA - - Excellent.
(7.) WALWORTH MFG. CO. - BOSTON USA / STILLSON - - Good++.
(8.) Unmarked - - Good++.

Choice Box 068: Lot of Seven: Six Inch Stillson Pattern Wood Handled Pipe Wrenches
(1.) Unmarked - - Good++.
(2.) CHAMPION DEARMENT - MEADVILLE, PA. USA - - Good++ except for some handle cracks.
(3.) WALWORTH MFG. CO. - BOSTON USA / STILLSON - - Excellent.
(4.) Unmarked - - Good++.
(5.) STILLSON'S WRENCH - PAT. AUG, 1882 - WALWORTH MFG. CO. / STILLSON - - Patent was issued to Caleb C. Walworth of Boston, Mass. for improvements on Stillson's original patent. Good++. PAT
(6.) STILLSON WRENCH - MFD. OSWEGO TOOL CO. - OSWEGO, N.Y. USA - - Good++.
(7.) STILLSON'S WRENCH - PAT. AUG, 1882 - WALWORTH MFG. CO. / O. S. PETTERSON (owner's ID?) - - Patent was issued to Caleb C. Walworth of Boston, Mass. for improvements on Stillson's original patent. Good+. handle worn down. PAT

Choice Box 069: Lot of Eight: Six Inch Stillson Type All Metal Pipe Wrenches
(1.) LAKESIDE (Montgomery Ward brand) - - Good++.
(2.) J. P. DANIELSON CO. INC. - STILLSON PATTERN - JAMESTOWN, N.Y USA - - Good+.
(3.) CHAMPION DEARMENT / MEADVILLE, PA. USA - - Good++
(4.) WEST GERMANY / GURANTEED - - Good+.
(5.) THE STILLSON WRENCH MFD BY HENRY & ALLEN - AUBURN, NY / GURANTEED - - Good++.
(6.) WESTERN GERMANY / STEEL - - Excellent.
(7.) TRIMO - TRIMONT MFG. CO. ROXBURY, MASS. USA - PATENTED - - Good++.
(8.) J. P. DANIELSON CO. INC. - JAMESTOWN, N.Y USA - DROPED FORGED / TOOL STEEL - - Good++.

Choice Box 070: Lot of Eight: Six Inch All Metal Pipe Wrenches
(1.) ROXCO - HEAVY DUTY - PAT. APP FOLR / TRIMONT MFG Co. - ROXBURY, MASS. - - Good++.
(2.) RIDGID - PAT 1727623 / RIDGE TOOL Co. - ELYRIA, O. - - Good++.
(3.) RIDGID HEAVY DUTY / RIDGE TOOL Co. - ELYRIA, O - - Excellent, like new with original red finish and decal.
(4.) RIDGID - PAT 1727623 - E6 / RIDGE TOOL Co. - ELYRIA, O. - - With offset jaws. Sep. 10, 1929 patent was issued to William O. Thewes of North Ridgeville, Ohio. Excellent with most of the original red finish and decal. Does have former owner's stamped initials "DF". PAT
(5.) PIPEMASTER / THE ERIE TOOL WORKS - ERIE, PA. - - Good++.
(6.) G. T. D. CORP'N (GREENFIELD TAP & DIE CORP.) / GREENFIELD, MASS. - - Stillson pattern. Good++.
(7.) IMPROVED STILLSON PAT. No. 2076830 - THE RIDGE TOOL CO. - ELYRIA, OHIO - - Patent was issued to William O. Thewes of Cleveland, Ohio on Apr. 13, 1937. Unusual to see a Stillson pattern from the Ridge Tool Co. . Good++. PAT.
(8.) BONNEY STILLSON / ALLENTOWN, PA. (with Bonney's "B" in a shield logo) - - Good++.

Choice Box 071: Lot of Seven: Eight Inch Wood Handle Stillson Pattern Pipe Wrenches
(1.) "MORCO" TRADEMARK - POPULAR STILLSON / MOORE DROP FORGING Co. - SPRINGFIELD, MASS. USA - - good++.
(2.) STILLSON WRENCH MADE IN USA - - Good++.
(3.) WALWORTH MFG. CO. - BOSTON USA / STILLSON - - Metal is Good++ but handle has been taped.
(4.) F. E. WELLS & SON Co. / GREENFIELD, MASS. USA - - Good++ but wood handle has been replaced with a metal sleeve.
(5.) PEXTO - P. S. & W. CO. USA (Peck, Stow & Wilcox) / STILLSON PATTERN WRENCH - BONNEY VISE & TOOL WKS. INC. - ALLENTOWN, PA. USA - - Odd with dual Peck, Stow & Wilcox and Bonney manufacturers markings. Good+.
(6.) STILLSON'S WRENCH - PAT. AUG, 1882 - WALWORTH MFG. CO. / STILLSON - - Patent was issued to Caleb C. Walworth of Boston, Mass. for improvements on Stillson's original patent. Good++. PAT.
(7.) GUARANTEED (in an oval logo) - - Excellent.

Choice Box 072: Lot of Seven: Eight Inch Wood Handle Stillson Pattern Pipe Wrenches
(1.) STILLSON WRENCH - MFD. THE OSWEGO TOOL CO. OSWEGO, N.Y. USA - - Good++.
(2.) PEXTO (in an oval logo) (Peck, Stow & Wilcox) - MADE IN USA - - Good++.
(3.) STILLSON WRENCH MADE BY MOORE DROP FORGING Co. - SPRINGFIELD, MASS. USA (with a "M" in a circle logo) - - Good+.
(4.) TOBRIN MADE IN USA (with a "T" in a triangle logo) / PLANTSVILLE, CONN. - - Good+ with minor handle chips.
(5.) F. E. WELLS & SON Co. / GREENFIELD, MASS. USA - - Rivet has been replaced, jaw spring is broken,
(6.) STEEL - - Good+.
(7.) WALWORTH / GENINUE STILLSON - - Good.

PiCs Lots CB 67 thru 72

Choice Box 073: Lot of: Seven Combination Fencing Tool Pliers (most are double hammer style)
(1.) Unmarked - - 10". Pitted.
(2.) RED DEVIL - S & H CO. USA. (Smith & Hemenway Co.) - No. 1906 - - 10.25". Excellent.
(3.) LAKESIDE (in script) (Montgomery Ward brand) - - 10.25".
(4.) FULTON - - 10" Unusual style with a hammer head and cross peen end. The Fulton brand was used by both The United Hardware & Tool Corp. of New York and Sears & Roebuck. Good with light pitting.
(5.) Unmarked - - 10". Pitted.
(6.) UTICA (can't read all the markings) - - 10.25". Good+ with weak markings.
(7.) O. V. B. - OUR VERY BEST logo (Hibbard, Spencer, Bartlett Hardware Co. - Chicago, Illinois) - - 9.5". Good+ with some weak markings.

Choice Box 074: Lot of: Six Combination Fencing Tool Pliers (all are single hammer/staple puller style)
(1.) BROKER USA - - 10.25". Good+.
(2.) CRESCENT TOOL CO - 1936-10 - - 10.25. Good+.
(3.) CHANNELLOCK - 85 - MADE IN USA - - 10.5". Excellent.
(4.) UTICA TOOLS - EMPIRE (in script) - UTICA, NY USA f- 291 - - 10.5".
(5.) A-R-T-I-S-A-N - MADE IN USA - 10-8-13-1482 - - 10.5". Artisan was a house brand for Gambles a chain of retail stores operated by Gamble-Skogmo Inc. Unknown manufacture. Good+ with some surface dings.
(6.) UTICA (can't read all the markings) - - 10.5". Pitting, weak markings.

Choice Box 075: Lot of: Seven Combination Fencing Tool Pliers (most are double hammer style)
(1.) LAKESIDE (block letters) (Montgomery Ward brand) - - 10". Good+ with surface dings.
(2.) I, M'F'G. CO. - PAT. APL'D FOR - - 9.75". Different design. Manufacture not known, patent not found. Good+.
(3.) Only markings are a diamond logos on the handles - -10.25". Good with some dings.
(4.) KRAUTER No. 1880-10-1/2 - - 10.25". Good+ with some surface dings, weak markings,
(5.) LAKE SIDE 4C2??? - - (Montgomery Ward?) - - 9.75". Good+ with some weak markings.
(6.) CRONK - - 9.75". Not the usual Cronk type and different than the standard fencing pliers design. Excellent. (Smith 46)
(7.) UTICA TOOLS - 1000 - UTICA, NY USA - PAT. APR. FOR - - 10.75". Similar to Cronk type. Good+ with some surface dings.

PiCs Lots CB 73 thru 75

Choice Box 076: Lot of: Eight Misc. Wrench and Tool Sets, Etc.
(1.) FULLERS USA - - 3.25" four way hex socket wrench. Excellent.
(2.) K-D TOOLS NO. 720 SCREW EXTRACTOR SET. - - Five screw extractors including one "for broken Alemite fittings". Extractors look unused, plastic pouch shows wear.
(3.) Two female hex drive ratchets (one with socket plug, metal case missing sockets, and a smaller case with female hex driver and plug with sockets. Good++.
(4.) No name socket and female hex drive ratchet with plug in metal box. Sockets are marked with size and MADE IN USA, Excellent.
(5.) SNAP-ON - - 5.5" empty tool holder.
(6.) POWER CRAFT - - Set of six micro screwdrivers. Drivers are excellent, plastic case has cracks,
(7.) RATCHET SOCKETTOOL - CERTIFIED LABORTAIES INC, - USA PAT. No. 2989881 - - Ratcheting socket handle with eight sockets, two screwdriver bits, L-handle, and an extension. I've seen the socket before but never this complete set. Patented by Raymond P. Lavietes of Woodbridge, Conn. on Jun. 27, 1961. Tools are Excellent, plastic case has broken lid hinge. PAT.
(8.) Set of unmarked cheaply made tools in a plastic pouch. Include several wrenches, pliers, ignition gauge and a file. Tools are excellent, pouch shows wear, missing a couple tools.

Choice Box 077: Lot of: Eleven Misc. Tools - Stanley, Miller Falls, Etc.
(1.) Miller Falls No. 29 Ratcheting Screw Driver - -10" in original box with Miller Falls label. Screwdriver is Excellent, like new, box shows some wear.
(2.) STANLEY - NEW BRITIAN, CONN. USA (with Sweet Heart logo) - - 4.5" wooden tool bit holder with eleven tool bits. Good++.
(3.) Yankee Clipper Oil Stone - An Excellent Stone for all Woodworking Tools - - 6.5". With original box. Stone looks unused, box is missing one end flap.
(4.) Unmarked brass air pump - - 7". For gas lanterns or stoves?. Good++.
(5.) MILLER FALLS CO. No. 629 - MADE IN USA - - 3" aluminum line level. Good++
(6.) Marked only "107.1" (also unreadable markings on handle) - - 3.75" small ratcheting screwdriver with wooden handle. Good++.
(7.) EZE-LAP DIAMOND - DIAMOND STONE - CARSON CITY, NV - - 3" diamond abrasive pocket sharpening stone with leather case. Good++.
(8.) DIETZGEN - - 5.25" metal level with leather case (case is also marked DIETZEN). Surveyor's transit hand level. Level is Good++, case flap is torn loose on back. .
(9.) L. F. & C - New York - 3 - -7" small hanging scale. Good+ with an area of corrosion on face plate.
(10.) "PERFECTION" GRADE SCALE - MODERN UTILITIES COMPANY - HARRISBURG, PA - PATENTS PENDING - -12" level with scale that show rate of fall. Patent was granted to Grover C. Frantz of Harrisburg, Penn. on June 28, 1927. Good++. PAT.
(11.) Advertising metal level from RED GIANT OIL CO. - COUNCIL BLUFFS, IOWA - -9" with original mailing box addressed to Herbert W. Park, Cunningham, Kansas Level is Excellent NOS, box shows some wear.

PiCs Lots CB 76 and 77

Choice Box 078: Lot of: Ten Tool Advertising Items
(1.) 13" wooden advertising ruler from Freund's Crafts 'N Things - Stafford, KS. Excellent.
(2.) WRENCH LIGHTER - - 3.25" novelty cigarette lighter Crescent type wrench. Excellent.
(3.) BLACK & DECKER - - 8" plastic working model of a Crescent type wrench. Excellent.
(4.) Copper Liberty Bell advertising Indiana Liberty Mutual Insurance Co. - Indianapolis, Indiana - - 4".
(5.) Lufkin advertising tape measure from Boyd G. Staats - Soil Conservation Contractor - Coats, Ks - - 1.5".
(6.) Barlow advertising tape measure from Kinsley Co-Op - Kinsley, Kansas - - 1.5".
(7.) Lot of five advertising items: 4 in one Pocket Screw Driver and Bottle Opener, Cal Van No. 825 sparkplug gauge, Earl E. Evans & Son Plbg. & Htg. - Stafford, Kansas key chain gas mileage calculator, Muehleback Beer bottle opener, unmarked large size bottle cap opener.
(8.) ZIG-ZAG cigarette roller - - 3.5".
(9.) WESTERN AUTO - - 3.25" belt buckle. Excellent, like new in original plastic sleeve.
(10.) Display frame with five copper token like lapel pins from Western Auto Merchandise Shows. 1980 - New Orleans, 1981 - Atlanta, 1982 - Kansas City, 1983 - Orlando and 1984 - Dallas. Pins are all in excellent, like new condition.

Choice Box 079: Lot of Six: Miniature Pliers and Wrenches
(1.) Lot of three miniature working Crescent type wrenches. One is marked UNION and the other two with a "W" in a circle logo. All made in Hong Kong - - 2.75". Excellent.
(2.) CRESCENT TOOL CO. 4" - - 4" Crescent wrench.
(3.) Marked only with a "W" - - 5.5" water pump pliers.
(4.) Unmarked - - 4.5" water pump pliers.
(5.) WIZARD HR1130 - - 5" water pump pliers.
(6.) Unmarked pliers - - 4.5".

Choice Box 080: Lot of Five: Assorted Tools and What's Its
(1.) Unmarked - -13" What's It, A round band with a wooden handle. Excellent.
(2.) FISHHOOK - - 7" cast fish hook hog ring pliers with a partial box of Decker's Fishhook Hog Rings. Pliers is excellent. box is poor.
(3.) Unmarked - - 7.75" wooden handled steel roller What's It tool.
(4.) BONNEY - PWA 1395 (Pratt Whitney Aircraft) - - 6.5" round phenolic like tube with a metal end cap. Listed in Pratt Whitney Aircraft Engine Parts Books as a fiber drift piston pin tool. Excellent.
(5.) Marked only with an odd "M" logo - - 7" wooden handled wire twister. Excellent.

PiCs Lots CB 78 thru 80

Choice Box 081: Lot of Six: Monkey Wrenches, Including a Coes Jog Bar and a Coes Mechanic's Wrench. All in poor condition.

Choice Box 082: Lot of Six: Coes 10" Wood Handled Monkey Wrenches

Choice Box 083: Lot of Four: Farm Tee Wrenches (Three IHC)
(1.) Osborne (later IHC) / P167 - - 9.5" x 11.5". Tee socket wrench. As found, uncleaned.
(2.) O (J. D. Tower & Sons - Mendota, Illinois) - - 8" Tee wrench without square opening variant. Painted with some pitting. (R1-457)
(3.) 131L (IHC logo) - - 7.5" x 13.75. Tee socket wrench. As found, uncleaned.
(4.) P1184 (IHC logo) (IHC, originally Osborne) - - 9.5" by 11.75" Tee socket wrench. As found, uncleaned.

PiCs Lots CB 81 thru 83

Choice Box 084: Lot of Five: Handled Countersink Tools and One Set of Three Countersink and Deburring Bits

Choice Box 085: Lot of: Ten Misc. Tools. Including Perfect handle type screwdrivers, Three brass nail sets?, a screw starter, two compasses, etc.

Choice Box 086: Lot of Four: Misc. Wrenches and Pliers
(1.) THE 'SUPERRENCH" (Williams) - - 8.5" double open ended wrench.
(2.) Unmarked - - 7" water pump type pliers.
(3.) BELL SYSTEM / UITICA 8W-242-6 - - 6" diagonal cutting pliers.
(4.) VLCHEK MADE IN USA (with "V" logo) - - 6.5" slip joint pliers. Excellent.

PiCs Lots CB 84 thru 86

Choice Box 087: Lot of Seven: T1349 Ford Model T Hubcap Wrenches (several variations).

Choice Box 088: Lot of: Four Ford Shop/Service "Z" Wrenches
(1.) Unmarked - - 10.25" offset ratchet with attached socket for Ford Model "T" fourth connecting rods.
(2.) 3Z2034 - FORD (script) - - 7.5" box end ratchet wrench for transmission band adjustment.
(3.) 5Z806 - FORD (script) (with Mossberg logo) - - 4.75" double open end S-wrench for Ford Model "T" generator brushes.
(4.) 5Z324 - FORD (script) (with Mossberg logos) - - 7.5" ratcheting hex box end wrench for transmission band adjustment.

Choice Box 089: Lot of Fourteen: Ford Auto and Tractor Tool Kit Double Open Ended Wrenches (several variations). All are marked with Ford (in script), some also marked T1917, Some USA - - 5.25".

Choice Box 090: Lot of: Six Ford Auto and Tractor Tool Kit Double Open Ended Wrenches (several variations). All are marked with Ford (in script), some also marked T1917. No. 1 is the earlier wide type. - - 5.25".

Choice Box 091: Lot of Six Double Open Ended 8N - 9N Ford Tractor Wrenches. All are marked FORD (in script) U.S.A. - - 4.25"

PiCs Lots CB 87 thru 91

Choice Box 092: Lot of Six: Alligator Wrenches
(1.) Unmarked - - 14".
(2.) TWIN ALLIGATOR WRENCH NO. 2 / MFG. BY ROEBLING - TRENTON, N. J.F - - 10".
(3.) EDMONDS METZEL MFG CO - CHICAGO - UNIVERSAL GRIP - APRIL 3, 1906 - - 8". Poor can't read most of the markings.
(4.) 50 - PAT. - - 7"
(5.) Unmarked - - 7". Some pitting.
(6.) BUHL SONS CO. - - 5.25".

Choice Box 093: Lot of Six: Alligator Wrenches
(1.) NO. 1 (in a shield logo) / Can't read markings - - 5.25".
(2.) 485 (with two Mossberg logos) - - 5.5", Poor.
(3.) Unmarked - - 5.5".
(4.) AMERICAN SAW CO - TRENTON, N.J. - ALLIGATOR PAT'D / 1 - - 5.5"
(5.) VAUGHAN & BUSHNELL MFG. CO. NO. 1 - - 5" Good++ with plating.
(6.) DUCK BILL / JR. (a Simmons Hardware Co. brand name) - - 5"

PiCs Lots CB 92 and 93

Choice Box 094: Lot of: Six: FORD (script) 01A-17017B - - 9" double hex box end for cylinder head and spark plug on Ford autos and "N" series Ford Tractors. All with different ID numbers. All excellent
(1.) ID number M39.
(2.) ID number 46.
(3.)M-01A-17017B No ID number
(4.) ID number 63.
(5.) ID number 64.
(6.) ID number 43.

Choice Box 095: Lot of Six: Ford Cylinder Head and Connecting Rod Wrenches
(1.) FORD (script) - - For Model "T" trucks.
(2.) FORD (script) - - For Model "T" trucks.
(3.) FORD (script) - - For Model "T" cars. Early type.
(4.) FORD (script) USA-M-40-17017 - - Open end with flange by six point box end. For 1933-34 Fords.
(5.) FORD (script) USA-M-40-17017 - - Open end with flange by six point box end. For 1933-34 Fords. Excellent with original black finish.
(6.) FORD (script) USA-M-52-17017 - - Open end with flange by six point box end. For late 1930's Fords.

Choice Box 096: Lot of Seven: Ford Cylinder Head and Connecting Rod Wrenches
(1.) FORD (script) - - For Model "T" cars. Later type.
(2.) FORD (script) - - For Model "T" trucks.
(3.) FORD (script) - - For Model "T" cars. Later type.
(4.) FORD (script) - - For Model "T" cars. Later type.
(5.) FORD (script) / T5893 - - For Model "T" cars. Early type.
(6.) FORD (script) USA-M-40-17017 - - Open end with flange by six point box end. For 1933-34 Fords.
(7.) FORD (script) USA-M-01A-17017 - - Open end with flange by 12 point box end. For 1939 Ford Autos and early 9N Tractors. Some pitting.

PiCs Lots CB 94 thru 96

Choice Box 097: Lot of Six: Block and Tackle Stretcher Parts
(1.) Unmarked - - Double pulley with a wired on heavy cast handle marked LEE BROS. PAT. AUG. 20. 95. - - Patent No. 544814 for a "Wire-Fence Machine" was issued on Aug 20, 1895 to Cyrus and Thomas Lee of Silver Creek, Nebraska PAT.
(2.) Can't read patent date - - Cast double locking pulley with wire grab.
(3.) Unmarked - - Cast double pulley. Weld repair.
(4.) Unmarked - - Cast double pulley.
(5.) Unmarked - - Double locking pulley with wire grab.
(6.) Can't read patent date - - Cast double locking pulley

Choice Box 098: Lot of Nine: Wire Tighteners
(1 thru 8.) Unmarked ratcheting, locking post lighteners. (Smith 663)
(9.) Unmarked in line tightener. Patented by John Reid of Dunedin, Otago, New Zealand on April 6, 1886. (Smith 633) PAT.

Choice Box 099: Lot of Eleven: Misc. Wire Grabs, Grips, Etc. No. 10 is Smith No. 756 "Stretcher with Post Dog". No. 11 is Smith No. 770 "Wire Grab"

PiCs Lots CB 97 thru 99

Choice Box 100: Lot of Seven: International Harvester Farm Wrenches
(1.) R28 (Champion, later IHC, later B. F. Avery) - - 8.75" with hang hole, no IHC logo variation. Pitting.
(2.) 2715 / (IHC logo) (IHC, earlier P & O) - - 9.5". Numbers and logo impressed.
(3.) U51 / H - - 9". No IHC logo. .
(4.) U51 / IHC logo - - 8.25". Logo impressed, number raised.
(5.) P1599 - IHC logo - - 12". Logo raised, number impressed.
(6.) Z786 - Z788 (IHC part M446) - - 8.25" all metal monkey wrench with ridged adjusting nut No IHC logo variant.
(7.) F239 (Oliver / IHC Canada) - - 9.5". Pitting.

Choice Box 101: Lot of Seven: Assorted Farm Wrenches
(1.) 397 (Superior Drill Co - Springfield, Ohio, later Am. Seeding Mach. Co.) - - 7". Good++. (R1-446)
(2.) K806 (John Deere) - - 12.5". Good+. (D386)
(3.) 591 (Papec - Shortsville, NY) - - 12". (R1-368)
(4.) M518 (Emerson-Brantingham, later Case T. M. Co.) - - 6.5" pitman wrench. Good++. (R1-162)
(5.) INDEPENDENT / SP116 - - 9".
(6.) P.P.CO / > 100 with "CH" logo (Pattee Plow Co - Monmouth, Illinois) - - 8". (R1-373)
(7.) 256 (Hoosier Drill Co., Richmond, Indiana Later American Seeding Machine Co. and IHC) - - 8". Raised numbers.

Choice Box 102: Lot of Eight: International Harvester Farm Wrenches and Screwdrivers
(1.) Unmarked (IHC HD721) - - 8" loop handled screw driver. Pitted.
(2.) P28 1/2 (IHC logo) - - 6.5".
(3.) 12737D (IHC logo) - - 5.5". All markings embossed (raised). Excellent.
(4.) P28 1/2 (IHC) - - 6.5". Pitted.
(5.) 1E - 2E / IHC logo (IHC part 4E) - - 9.25" solid handle variation.
(6.) H523 1/2 (IHC) - - 6.5" double open end S-wrench came with International Harvester Auto wagons, early gas engines, and threshing machines. Pitting.
(7.) H523 (McCormick, later IHC) - - 8.5" double open ended S-wrench. Good+.
(8.) Unmarked (IHC HD721) - - 8" loop handled screw driver

PiCs Lots CB 100 thru 102

Choice Box 103: Lot of Seven: Farm Type Wrenches
(1.) PR40 (Sattley Mfg. Co. - Racine, Wisc. and Moline Plow Co) - - 10.5" with small hammer head. Spots of pitting. (R1-333, R1-413)
(2.) 397 (Superior Drill Co - Springfield, Ohio, later Am. Seeding Mach. Co.) - - 7". Good. (R1-446)
(3.) 1059B - IHC logo / 2 and a McCormick Deering logo - - 8.5" with six openings. Excellent.
(4.) GALE / DG848 - - 9" flat steel. Good++. (R1-193)
(5.) 2715 / (IHC logo) (IHC, earlier P & O) - - 9.5". Numbers and logo impressed. Pitting.
(6.) Unmarked - - 9" Farmer's S-Wrench pattern. Some light pitting.
(7.) GALE / DG848 - - 9" flat steel. Edge dings. (R1-193)

Choice Box 104: Lot of Eight: International Harvester Wrenches and Oil Cans
(1.) 1E - 2E / IHC logo (IHC part 4E) - - 9.25" solid handle variation. Some pitting.
(2.) 1E / 2E with HC logo (IHC part 4E) - - 9.25" solid handle variation.
(3.) H523 1/2 (IHC) - - 6.5" double open end S-wrench came with International Harvester Auto wagons, early gas engines, and threshing machines. Weak markings, some pitting.
(4.) Z810 (McCormick, later IHC) - - 7" pitman wrench. Markings raised
(5.) P11 (Milwaukee Harvester Co., later IHC) - - 9.75". With post, numbers indented variant.
(6.) P28 with IHC logo (Plano, later IHC) - - 8.25". Raised numbers.
(7.) HC Part No. HL156 - - 7.5" labeled advertising oil can. McCormick-Deering Farm Machines and Equipment (with IHC logo). Label is mostly unreadable. Dealer's name looks like ROHRBAUCK - ?EECH ??? PA.
(8.) IHC Part No. H156? embossed: INTERNATIONAL HARVESTER CO - - 7.5" Can has several dents.

Choice Box 105: Lot of Nine: Farm Type Wrenches
(1.) 7350C with Eberhard's "E" in a circle logo - - 8" doe-s wrench.
(2.) INDEPENDENT / SP115 - "CH" logo - - 7,25". As found, not cleaned.
(3.) J.I.C.P. WKS. 359 - - 8.5" with hammer head. Good+. (R1-77)
(4.) 7350B with Illinois Malleable Iron's "IM" in a circle logo - - 7" doe-s wrench.
(5.) HOG RINGER / AUGUST 1892 - - 7" hog ringer pliers. Patent not found. Set screw is missing. (not in Sims' book)
(6.) 7338C with Eberhard's "E" in a circle logo - - 8" doe-s wrench. Has been bent.
(7.) 271N - 2 / (IHC logo) - - 6" x 6.5". Tee socket wrench. Good+.
(8.) 46CL - Case Eagle logo (Case T. M. Co.) - - 8" by 8" Tee socket wrench. (R1-82)
(9.) REGULATOR WRENCH / 6245430-50 - - 8.5" doe welding/bottle wrench.

PiCs Lots CB 103 thru 105

Choice Box 106: Lot of Nine: International Harvester Wrenches
(1.) ZA810 (IHC, originally McCormick) - - 9.5" pitman wrench. As found not cleaned.
(2.) P & O CO. / P & O CO - - 9.25" flat steel doe.
(3.) K439 (Osborne then IHC then E-B and finally J. I. Case) - - 7" pitman wrench. Good+.
(4.) Z810 with IHC logo (McCormick, later IHC) - - 7.25" pitman wrench. Numbers raised, logo indented. Good++.
(5.) Unmarked 260 (McCormick / IHC / / Kentucky Drill / Hoosier Drill / American Seeding Machine) - - 7.25". Pitted.
(6.) P28 1/2 (IHC) - - 6.25". Good++.
(7.) P890 - IHC logo / E (IHC, earlier Osborne) - - 7.5". P890 and IHC logo both raised. Good++. (R!-254)
(8.) R197 (McCormick- / IHC) - - 8.25". 13/16" and 1-1/16" openings variant.
(9.) P & O CO. / P & O CO - - 6.5" flat steel doe. Pitted.

Choice Box 107: Lot of Nine: International Harvester Wrenches
(1.) IH 363021R1 (IHC) - 1-5/16 - 1-1/8 - - 18" double 12 point box end. Excellent except for weak markings.
(2.) IH 373941R2 (IHC) - 1-5/16" - - 15" single12 point box end. Excellent.
(3.) H3769M with IHC logo - - 16" offset hex box by open end. Pitting.
(4.) 25645B with IHC logo - - 19.75" double open ended wrench.
(5.) G3866 and IHC logo - - 14.5" double open ended S-wrench variation.
(6.) 45662DA (with IHC logo) - - 12" offset double hex socket.
(7.) 45662DA (with IHC logo) - - 12" offset double hex socket.
(8.) 45662DA (with IHC logo) - - 12" offset double hex socket. Light pitting.
(9.) IH 373941R1 (IHC) - 1-5/16 - - 9.25" single 12 point box end.

Choice Box 108: Lot of Eight: International Harvester Wrenches
(1.) R172 (IHC) - - 6.5". No logo, numbers raised variation.
(2.) 1595E (IHC logo) - - 6"
(3.) 11858DA (IHC logo) - 5.5" flat steel hook spanner for Farmall tractor water pumps.
(4.) 1595E (IHC logo) - - 6". Light pitting.
(5.) Unmarked - - 3.5" sparkplug socket with closed end.
(6.) T28 (IHC and Kentucky Drill Co / American Seeding Co) - - 5.5" tee socket wrench with screwdriver end and hook. Raised markings. (not in Rathbone) .
(7.) D736 / IHC logo (IHC, originally William Deering & Co.) - - 5.5" pitman wrench. Number indented, logo raised. Excellent.
(8.) F354 / IHC logo - - 8". Three square holes, markings indented variation. Weak markings.

PiCs Lots CB 106 thru 108

Choice Box 109: Lot of Seven: Misc. Farm Wrenches
(1.) ALCO TOOL CO. - BIDGEPORT, CONN. - - 5.25" soe flat steel.
(2.) Unmarked - - 8.5: wood handled monkey wrenches. Poor.
(3.) D51 - - 8.5". Small end on left is turned up marking variation.
(4.) 5089 (Avery Co. - Peoria, ILL) - - 10" Tee socket wrench, four socket variant. Good+. (R1-26)
(5.) SHARPLES SEPARATOR CO / TUBULAR - - 6" single open end. Good. (R1-422)
(6.) 271N / (IHC logo) - - 6" x 6.5". Tee socket wrench. Good+.
(7.) Unmarked (K234 -D. M. Osborne & Co, Auburn, NY later IHC) - - 3.5" by 5"tee handled socket wrench. Poor, pitted.

Choice Box 110: Lot of Nine: International Harvester Wrenches
(1.) Unmarked (IHC 4725D) - - 10.25" extended double socket. Good++.
(2.) Unmarked (IHC 67479C1) - - 10.5"
(3.) 12737DA (IHC logo) - - 5.25". Good++.
(4.) IH 373942R1 - 1-5/16 - - 9" single12 point box end. Excellent.
(5.) 2155 (No logos) (Champion than, IHC, B. F. Avery) - - 10". Some pitting.
(6.) Z812 (McCormick, later IHC) - - 7". Good+.
(7.) ZA810 / IHC logo (IHC, originally McCormick) - - 9.25" pitman wrench.
(8.) L9 (with IHC logo) - - 8". Five round holes, logo raised, numbers indented variation. Pitting.
(9.) U219 (IHC logo) - - 6.5". Pitting. (R1-255)

Choice Box 111: Lot of Eight: Farm Type Wrenches
(1.) 90257 (Delco) - SPARK PLUG - GEN. NUT / CYLINDER STUD - BATTERY NUT (Delco) - - 8".
(2.) 3 PLANET JR. / PLANET JR. - - 6.5". Excellent.
(3.) 274A (Massey-Harris) - - 8.5". Good++. (R1-311)
(4.) Marked only "13" (orphan) - - 5.75". Excellent.
(5.) 95 (Vulcan Plow Co, Evansville, Indiana) - - 7.5". Good+. (R1-475)
(6.) ECONOMY CHIEF - - 6". Double open end S-wrench. Good++. (R1-157)
(7.) ECONOMY KING (King Separator Co. - Buffalo, NY) - - 7.75" open with screwdriver end, face spanner. No edge notch variation. Good+.
(8.) 7370 (Empire Plow Co. - Cleveland, Ohio) - - 6.5". some pitting.

PiCs Lots CB 109 thru 111

Choice Box 112: Lot of Eight: Monkey Wrenches, Hammers and a Hatchet (some have railroad markings)
(1.) RAILROAD SPECIAL Dual marked J. H. WILLIAMS and W & B (Whitman & Barnes) - WARRANTED - MADE IN USA - - 6.5" all metal monkey wrench.
(2.) FAIRMOUNT / H22 - - 10.5" hammer.
(3.) PLUMB / A.T.&S.F.RY (Atchinson, Topeka & Santa Fe Railway) - - 13.5" hatchet.
(4.) BLUE-POINT - KENOSHA, WIS. - 2 OZ. - - 9.5" small 2 oz. ball peen hammer. Handle has been taped.
(5.) GIRARD WRENCH MFG. CO - GIRARD, PA / RAILROAD ROUGH - - 8" all metal monkey wrench with patterned handle. Good++.
(6.) COES WRENCH CO. - WORCESTER - USA / MADE IN USA UNDER L. COES PAT'S - STEEL Also marked; C & S RY (Colorado & Southern Railway) - - 15" monkey wrench with wooden knife handles. Good++.(HP53)
(7.) GIRARD WRENCH MFG. CO - GIRARD, PA / RAILROAD ROUGH - - 8" all metal monkey wrench with patterned handle. Good+.
(8.) BEMIS & CALL / ?SLRR (can't read first letter may be Oregon Short Line Railroad) - - 10" all metal monkey wrench. Good++.

Choice Box 113: Lot of Ten: Railroad all Metal Monkey Wrenches
(1.) BEMIS & CALL - also marked SANTA FE - - 8" all metal monkey wrench. Good.
(2.) BEMIS & CALL - also marked I.C.R.R. (Illinois Central Railroad) - - 18" all metal monkey wrench. Good++.
(3.) RAILROAD SPECIAL Dual marked J. H. WILLIAMS and W & B (Whitman & Barnes) - also marked UNION PACIFIC - - 8" all metal monkey wrench. Minor edge dings.
(4.) RAILROAD SPECIAL Dual marked J. H. WILLIAMS and W & B (Whitman & Barnes) - also marked U.P.R.R. (Union Pacific Railroad - - 8" all metal monkey wrench. Good+.
(5.) Pot Luck (I missed this one when listing)
(6.) GIRARD, etc. / RAILROAD ROUGH - also marked PACIFIC - - 8" all metal monkey wrench with patterned handle. Good.
(7.) W & B diamond logo (Whitman & Barnes) - also marked C & S RY. (Colorado & Southern Railway) - - 8" all metal monkey wrench. Fair.
(8.) INTERMEDIATE also marked O.S.L. (Oregon Short Line Railroad) - - 15" all metal monkey wrench.
(9.) BEMIS & CALL - also marked IC.M.&S.I.P.&L?) - - 8.5" all metal center screw adjust monkey wrench. Grind marks, drilled hang hole in handle.
(10.) INTERMEDIATE also marked MO.PAC.RR (Missouri Pacific Railroad) - - 15" all metal monkey wrench. Some dings.

PiCs Lots CB 112 thru 113

Choice Box 114: Lot of Seven: Monkey Wrenches and one Hammer (some with Railroad markings)
(1.) TRADEMARK COES (in oval) / BILLINGS - MADE IN USA (with a "B" in a triangle logo) - also marked A.T.&S.F.RY (Atchinson, Topeka & Santa Fe Railway) - - 15" all metal nut wrench. Last Coes type monkey wrench manufactured. Good+. (HP66).
(2.) BILLINGS - MADE IN USA (with a "B" in a triangle logo) - also marked A.T.&S.F.RY (Atchinson, Topeka & Santa Fe Railway) - - 12" all metal monkey wrench. Good+. (like HP66 but without the Coes marking)
(3.) TRUE TEMPER - also marked A.T.&S.F.RY (Atchinson, Topeka & Santa Fe Railway) - - 15" sledge hammer. Good++.
(4.) Can't read markings - -8" all metal monkey wrench. Good.
(5.) BEMIS & CALL - - 15" combination nut and pipe wood handled monkey wrench. Fair.
(6.) COES WRENCH CO, etc. - - 10" knife type wooden handled monkey wrench. Fair, as found not cleaned. (HP55)
(7.) BEMIS & CALL - - 8" knife type wooden handled monkey wrench. Poor.

Choice Box 115: Lot of Ten: A Variety of Adjustable Wrenches
(1.) 9 AUTO / 50 - - 9" automotive type adjustable wrench. Excellent.
(2.) MOSSBERG STERLING NO. 1 - - 5" bike wrench. Good.
(3.) ACME (inside a Whitman & Barnes logo) - PAT FEB 27, 83 - MADE IN USA - - 7.75". twist handled adjustable nut wrench. Seymour's patent applies. Good. (S364) PAT
(4.) Unmarked - - 6" wood handled Stillson type nut wrench. Excellent, like new.
(5.) MFD. USA - - 6" Crescent type adjustable wrench. Excellent.
(6.) GIRARD WRENCH MFG. CO - - 6" WOODEN HANDLE MONKEY WRENCH. Poor.
(7.) THE L & S (Lamson & SESSIONS CO. - Cleveland, O. USA - - 6" wooden handle monkey wrench with ridged adjusting screw knob. Good, replaced handle nut.
(8.) COES - WRENCH CO. - WORCESTER - MASS. U.S.A./ MADE IN U.S.A - UNDER L. COES PAT'S - STEEL - - 6" monkey wrench with wooded knife type handle. Good++. (HP53)
(9.) BEMIS & CALL - - 8" curved handle Crescent type adjustable wrench, Open handle variation. Poor.
(10.) BEMIS & CALL - - 8" curved handle Crescent type adjustable wrench, Open handle variation. Good.

Choice Box 116: Lot of Six: Adjustable and Strap Wrenches
(1.) TRIMO - - 9.5" all metal adjustable nut wrench. Poor, pitted.
(2.) AWARD - SANKI 10" / DROP FORGED STEEL - JAPAN - - 10.25" self adjusting wrench. Good++, plated.
(3.) ACE SLIP & LOCK - NUT WRENCH / CLOVERS CO. BEDFORD, O. - - 10.5" Crescent type adjustable spud wrench with a locking wing nut. Excellent.
(4.) GELLMAN MANUFACTURING COMPANY - ROCK ISLAND, ILL. - USA - POLLY (script) / PATENTED APRIL 17, 1923 - 12 IN. NO. 121 - - 12" quick adjust nut wrench, external spring version. Good+. (S522) PAT
(5.) RIDGID NO. 2 PATENT APPLIED FOR / RIDGE TOOL CO, - - 12" malleable cast strap wrench. Good++.
(6.) RIDGID NO. 2 / RIDGE TOOL CO, - - 12" aluminum strap wrench. Excellent.

PiCs Lots CB 114 thru 116

Choice Box 117: Lot of Seven: Veterinary, Animal husbandry, Livestock Tools
(1.) M. WOCHER & SON - - 24" large extracting forceps? with removable handles. Max Wocher & Son were in business from 1840 to 1900 in Cincinnati, Ohio. Pitting.
(2.) Unmarked - - 10" pig snouter. Good +, wooden block is missing.
(3.) PAT'D APRIL 21, 1880 - - 7.5" double jaw hog ringer pliers. Replaced pivot rivet?.
(4.) Unmarked - - 16" horse dental extracting forceps. Good++.
(5.) DR. RHINHART HANDY HOG HOLDER - PAT NOV 24, 1931 - 1833759 / GALESBURG, ILL. - - 21.5" malleable hog catcher. Good++, painted.
(6.) Unmarked - - 13" compound hoof nippers. Excellent.
(7.) E. C. STEARNS - PAT. APL'D FOR - - 12.5" compound hoof nippers. Excellent, some markings are weak, not readable.

Choice Box 118: Lot of Six: Veterinary, Animal husbandry, Livestock Tools
(1.) NEVERSLIP with in and off pointing arrows - - 9".horse shoe calk wrench. Excellent.
(2.) Sklar USA - - 9" emasculator. Excellent with plated finish.
(3.) Unmarked - - 10.75" I think this is a shop modified horse tongue depressor made from an early auto or buggy top hinge.
(4.) Unmarked - - 10.5" horse tongue depressor,
(5.) HASCO (NEWARK, NJ) - - 8.5" animal ear marking pliers. Good+.
(6.) DR. MILLER PIG SNOUTER / PAT SEPT 20 98 - - 11". Excellent with most of the original finish, wooden block is missing.

PiCs Lots CB 117 and 118

Choice Box 119: Lot of Six: Misc. Tools and What's Its
(1.) Unmarked - - 25" shop made? log pike, Broken handle.
(2.) MACK? WELDING CO. (markings damaged, hard to read) - DULUTH / PAT. PEND. - - 15.5" aluminum What's It. Mack Welding made tools for the lumber and mining industries. Good.
(3.) Unmarked - - 13.5" iron interesting What's It.
(4.) Unmarked - - 14.25" lead ladle or dipper with swivel pot.
(5.) Lot or three wooden handled soldering irons - - 11". Good++ to Excellent.
(6.) Fancy cast iron handle or bracket? - - 4.75".

Choice Box 120: Lot of Seven: Farrier's Tools
(1.) ENDERES G3 - - 6" hoof pick. Excellent
(2.) DIAMOND DULUTH USA - C7 (with horseshoe logo) - - 5.75" clinch cutter. Excellent.
(3.) ORIGINAL ENDERES USA - 109 - - 6.5" clinch cutter.
(4.) COLO. SSADDLE - 32 - 166 - - 6" clinch cutter.
(5.) Unmarked - - 6" clinch cutter. Pitted.
(6.) Can't read markings - - 6.25" clinch cutter. Severe mushrooming.
(7.) ENDERES G4 - - 6" hoof pick. Good+.

Choice Box 121: Lot of Six: International Harvester Wrenches
(1.) KENTUCKY DRILLS / KR299 - Brennan & Co. Lou. KY (also IHC and American Seeding Co.) - - 9". Pitted. (R1-62)
(2.) L9 (with IHC logo) - - 8,25". Five round holes, logo raised, numbers indented variation. Excellent with original red finish.
(3.) R172 with IHC logo - - 6.5". Numbers and logo impressed. Good+.
(4.) P349 - IHC logo - - 7.5". Numbers and logo raised variant. Good++.
(5.) 509 (Osborne, later IHC, later E&B) - - 8". With 13/16" square opening variation. Good++.
(6.) INTERNATIONAL HARVESTER CO. / PAT. SEP. 7, 97 - - 8.5" Vandegrift's patent all metal monkey wrench. Some edge mushrooming. PAT

PiCs Lots CB 119 thru 121

Choice Box 122: Lot of Six: Ten Inch Curved Handle Crescent Type Wrenches
(1.) WESTCOTT - THE KEYSTONE MFG. CO, / 10 INCH NO 80 - BUFFALO, NY USA - - Good+, with some of the original finish, jaw edge dings.
(2.) B & C / 10 IN - - Good+, edge dings.
(3.) B & C (on shaft) / BEMIS & CALL (below jaws) - 10 IN - - Good++.
(4.) B & C / BEMIS &: CALL CO. - 10 IN 48A - - Closed handle variation. Good++.
(5.) FORDSON (marked under jaws) (weak markings) / 10 INCH No 80 - - Scarce marking variation of a Fordson Tractor tool box wrench. Good+.
(6.) THE BILLINGS & SPENCER CO. - HARTFORD, CONN. USA / TREATED STEEL FORGING - 10 IN.

Choice Box 123: Lot of Eight: Eight Inch Curved Handle Crescent Type Wrenches
(1.) B & C (Bemis & Call) - - With open handle. Good+
(2.) B & C (Bemis & Call) - - With open handle. Good+
(3.) B & C (Bemis & Call) - - With open handle. Good++ with most of the original black finish.
(4.) BARCALO / BUFFALO also marked ORD. DEP. U.S.A. (Ordinance Dept. U. S. Army) - - Good+.
(5.) Marked only "8 in" - - Good with some edge dings.
(6.) WESTCOTT - THE KEYSTONE MFG. CO, / 8 INCH NO 78 - BUFFALO, NY USA - - Good++.
(7.) WESTCOTT - THE KEYSTONE MFG. CO, / 8 INCH NO 78 - BUFFALO, NY USA - - Good+.
(8.) 8" Queen City - GUARANTEED FORGED STEEL / Bergman Tool Mfg. Co. - Buffalo, New York - - Good+.

Choice Box 124: Lot of Seven: Eight Inch Curved Handle Crescent Type Wrenches
(1.) B & C (Bemis & Call) - - Good++.
(2.) THE ERIE TOOL WORKS - ERIE, PA USA - - Good++.
(3.) WESTCOTT - THE KEYSTONE MFG. CO, / 8 INCH NO 78 - BUFFALO, NY USA - - Good+.
(4.) Marked only "8 IN" - - With serrated pipe jaw Good++.
(5.) B & C (Bemis & Call) - - Good++.
(6.) Marked only "8 IN" - - Good++.
(7.) BARCALO / BUFFALO - - Good++.

Choice Box 125: Lot of Eight: Various Adjustable Wrenches
(1.) BOOS TOOL CORP - K.C., MO.- PATENTED - - 7.5" turn handle to adjust wrench. Serrated top jaw and smooth bottom jaw variation. Patented by Joseph B. and Lyal R. Boos of Kansas City, MO. Good+, weak markings. (see S381) PAT
(2.) Markings too weak to read - - 7.75" Boos turn handle to adjust wrench. Both jaws smooth variation. Good++.
(3.) BOOS TOOL CORP - CHROME-MOLYBDENUM -PAT. PEND. - K.C., MO.- - 7.5". Serrated top jaw and smooth bottom jaw variation. Good+.
(4.) BOOS TOOL CORP - CHROME-MOLYBDENUM - K.C., MO.- PATENTED - - 6.25". Serrated top jaw and smooth bottom jaw variation. Good
(5.) FOOTPRINT - MADE IN ENGLAND (foot print logo) - - 7.25" adjustable pliers type wrench with screwdriver end. Good++.
(6.) Unmarked - - 6.75" Footprint type pliers like No. 5 above. Good++.
(7.) PAT SEP / 7, 97 - - 7" all metal version of the Vandegrift patent monkey wrench. Fair. PAT.
(8.) WALDEN-WORCESTER - PAT. JULY 20, 1909 - - 9.25". 3/4" female drive loop handled ratchet. Patent was issued to Frederick E. Walden of Worcester, Mass. Good++, some weak markings. PAT.

PiCs Lots CB 122 thru 125

Choice Box 126: Lot of Four: Six Inch Keystone-Westcott Curved Handle Crescent Type Adjustable Wrenches
(1.) WESTCOTT - THE KEYSTONE MFG CO / BUFFALO NY USA - 6 INCH NO 76 - - Solid handle. Good++.
(2.) WESTCOTT (on shaft) THE KEYSTONE MFG. CO, - BUFFALO, NY USA (below jaws) / 6" - - Open handle. Rare with serrated pipe jaw insert Good+.
(3.) WESTCOTT (on shaft) THE KEYSTONE MFG. CO, - BUFFALO, NY USA (below jaws) / 6" - - Open handle. Good+.
(4.) 406 WESTCOTT - THE KEYSTONE MFG CO / BUFFALO NY (etc.) - - Solid handle. Scarce slimmer design variant than usually seen. Good+.

Choice Box 127: Lot of Four: Bemis & Call Six Inch Curved Handle (Good+ to Good++)

Choice Box 128: Lot of Four: Six Inch Curved Handle Crescent Type Adjustable Wrenches
(1.) WESTCOTT - THE KEYSTONE MFG CO / BUFFALO NY USA - 6 INCH NO 76 - - Solid handle. Rare with serrated pipe adjustable jaw. Pitting.
(2.) BARCALO-BUFFALO (below jaws) / 6 IN (on shaft) - - Open handle, Good+.
(3.) BULLOCK MFG. CO. SPRINGFIELD, MASS. USA (below jaws) / 6 IN (on shaft) - - Some edge dings.
(4.) Unmarked (like Robinson) - - Pitted.

Choice Box 129: Lot of Six: Six Inch Curved Handle Crescent Type Adjustable Wrenches
(1.) Marked only with a "T" in a circle logo and 6 IN (made by Tower & Lyons?) - - With open handle and the quick knurled gear removal feature. Good+.
(2.) "T" in a circle logo - PAT. APPLIED FOR - 6 IN - - With open handle and the quick knurled gear removal feature.Good+.
(3.) WESTCOTT - THE KEYSTONE MFG CO / BUFFALO NY USA - 6 INCH NO 76 - - Solid handle. Good++.
(4.) BARCALO / BUFFALO - 6 (on shaft) - - Open handle. Excellent.
(5.) 6 INCH QUEEN CITY - BUFFALO, NEW YORK / BERGMAN TOOL MFG. CO. - GUARANTEED FORGED STEEL. Good+.
(6.) ROBINSON / DROP FORGED STEEL - - Good++ with some jaw edge dings.

PiCs Lots CB 126 thru 129

Choice Box 130: Lot of Six: Various Wrenches, Etc.
(1.) Marked only "TAIWAN" - - 11" locking C-Clamp type pliers. Vise-Grip copy cat Good++.
(2.) Unmarked - - 7" "Foot Print" type adjustable plier wrench with screwdriver end. Replaced pivot bolt and nut.
(3.) M303 - CHANDLER CO - CEDAR RAPIDS, IOWA / YOKE WRENCH - PATENT PENDING - - 12.5" with pivoting upper jaw and a notched lower jaw. (not listed, no info)
(4.) Unmarked - - 12" odd tool with pivoting tool. Found listed in a Dayton Superior (of Miamisburg, Ohio) catalog of concrete tools and described as an "A-30 Breakback Wrench - designed to break off the snap tie ends after the formwork has been stripped." List price is $325.00. Good+.
(5.) RATCHLOK / SUMMIT TOOL CO - DENVER, CO - PAT NO. 3564956 - - 11" odd locking pliers with extra long handle and a V-notched adjusting jaw. Patented by Brenard Landen of Fountain, Colorado. Scarce newer wrench in Excellent condition. (not listed) PAT.
(6.) 2126 PLUMB MADE INUSA - - 16" rolling head type pry bar. Good++.

Choice Box 131: Lot of Six: Mixed lot of Wrenches
(1.) Marked only: "11" (David Bradley) - - 8" malleable cast sliding wedge adjust alligator wrench. This one is the smooth jawed nut wrench version. Pat 1-6-1891 by Theodore Vandegrift of Shelbyville, Indiana and mfg. by the Vandegrift Mfg Co of Shelbyville, Indiana. Pitted. (S546) PAT
(2.) COCHRAN - 10 IN - PAT'D 1908 / MODEL 1910 - MFG. IN CHICAGO, ILL USA. - - 10". Modified Stillson type with a patented "rocking collar". The patent was issued to James M. Cochran of Paducah, KY on April 21, 1908. Also found marked "Mfg. in New Haven. Conn." Some edge dings. (S588) PAT
(3.) "VICTOR" TRADEMARK / PAT. DEC 23, 1902. PAT. AUG 25, 1903 (can't read all the markings - - 8" quick adjust pipe wrench made by the Bonner Mfg. Co. of Chrisman, ILL. and patented by Clarence E. Bonner, Cherrypoint, IL. Pitted. (S653) PAT.
(4.) LIGHTNING WRENCH MADE BY HAMPTON MACHINE & TOOL CO. HAMPTON, IOWA - - 9.5" with screwdriver on end. Excellent. (S690)
(5.) SUPERIOR WRENCH COMPANY / MARSHALLTOWN, IOWA - - 13" self adjust wrench. Severe pitting.
(6.) Unmarked - - 9.5" What's It rod handled tool with a small opening at 90 degrees.

Choice Box 132: Lot of Seven: Assorted Pocket and Bike Size Wrenches, Etc.
(1.) THE ELGIN, etc. - -7" adjustable alligator wrench. Good+.
(2.) SANDOW - THE LAVIGNE & SCOTT MFG CO, - NEW HAVEN, CT - PAT FEB. 5, 95 - - 5" center screw adjust with skeleton handle. Patented by Joseph P. Lavigne of New Haven, Conn. Wrench has been modified. The side plate has been cut down and reriveted, some of the markings were lost in the process. (S109B) PAT
(3.) SUL (marked on sliding wedge) / GERMANY (marked on edge of shaft) - - 6" wedge adjust nut wrench. Good++.
(4.) Billings & Spencer - D - - 6" B & S's Model "D" center screw adjust bile or auto wrench. Good+.
(5.) WAKEFIELD NO. 17 - WORCESTER MASS. - MADE IN USA. - - 7" side adjust pocket wrench usually found with th Indian Motocycle imprint. Good++.
(6.) GELLMAN WRENCH CORP. - ROCK ISLAND, ILL USA - POLLY / PATENTED APRIL 17, 1923 - 6 IN. NO. 61 DROP FORGED - - 6" quick adjust nut wrench, internal spring variation. Patented by Israel Gellman of Chicago, ILL. Good+. PAT
(7.) BMC MFG. CORP. - BINGHAMTON, NY - PATENT APPLIED FOR - - 7" Locking Pliers. Patented Feb. 19, 1946 by Francis A. Snell of Chenango Forks, NY. Good+. (S278) PAT.

PiCs Lots CB 130 thru 132

Choice Box 133: Lot of: Five Misc. Wrenches
(1.) Whitman & Barnes' W & B in a diamond logo - MADE IN USA / DROP FORGED STEEL - - 10" wood handled monkey wrench. Some hammer mushrooming.
(2.) MEADVILLE WRENCH- MEADVILLE, PA. - - Briggs style center screw adjust all metal monkey wrench with short hex adjusting nut. Weak markings.
(3.) BMC MFG. CORP. - BINGHAMTON, NY - PATENT APPLIED FOR - - 7" Locking Pliers. Patented Feb. 19, 1946 by Francis A. Snell of Chenango Forks, NY. Good+. (S278) PAT.
(4.) FORD (script) USA / M - - 5.25" Ford auto and tractor doe wrench. Excellent.
(5.) ARMSTRONG - 661J - - 4" doe-S wrench. Pitted.

Choice Box 134: Lot of: Four Elgin adjustable Alligator Wrenches. Patent were issued to Henry Smith of Elgin, IL and William Frenk of Dundee, ILL. (S35) PAT. and PAT.
(1.) THE ELGIN PAT JUNE 8, 97 - EXTRA JAW 25¢ - PATENT APPLIED FOR (on die holder) - - 7" die holder variation complete with 1/2"-13 die. Good++.
(2.) THE ELGIN PAT JUNE 8, 97 - EXTRA JAW 25¢ - - 7" no die holder variation. Some corrosion.
(3.) THE ELGIN PAT JUNE 8, 97 - EXTRA JAW 25¢ with a star logo marked ELGIN GENIUNE IMPROVED - TRADEMARK REGISTRED JUNE 8, 1897 - JUNE 9, 1906 - MAY 20, 1916 - - 7" die holder variation (no die or holder
(4.) THE ELGIN PAT JUNE 8, 97 - EXTRA JAW 25¢ - PAT'D JAN 9, 1906 (ON DIE HOLDER) - - 7" die holder variation complete with die holder and 3/8"-16 die. Good++.

Choice Box 135: Lot of: Four Misc. Tools
(1.) THE H. D. S. & CO. - PERFECT HANDLE - PAT. AUG 25. 03 - MADE IN PLANTSVILLE, CONN. U.S.A. - - 16.5". screwdriver with knife type wooden handle. One of the longer Perfect Handle screwdrivers H. D. Smith made. Patented Aug. 25, 1903 by William S. Ward of Plantsville, Conn. Good++. PAT.
(2.) MFD UNDER L. COE'S PAT'S - STEEL - - 12" Knife type wood handled monkey wrench. Some edge dings. (like HP58 but with wood handle not all metal)
(3.) 106SK (weak markings, hard to read) - - 18.5" ratchet wrench with 15/16" female square drive. May be an implement wrench? Good++ with some original green paint. (not listed, no info found)
(4.) N72 (For silo filling machinery and alfalfa hay cutters made by E. W. Ross - Springfield, Ohio) - 16.25". Good++. (Not in Rathbone)

Choice Box 136: Lot of: Five Plier Type Wrenches
(1.) Unmarked - - 7" pliers with wire cutter.
(2.) VAUGHAN & BUSHNELL MFG. CO. - CHICAGO - - 6" pliers with wire cutter.
(3.) CRESCENT TOOL CO. JAMESTOWN, NY USA - M16 - - 6" needle nose pliers.
(4.) E. A. BERG - ESKILSTUNA - SWEDEN - 1528 / FOR PIANOTRAD (Swedish for "piano wire") - 1941 (date marked on inside of handle?) - - 6.5" diagonal type wire cutting pliers. excellent.
(5.) BMC MFG. CORP. - BINGHAMTON, NY - PATENT APPLIED FOR - - 7" Locking Pliers. Patented Feb. 19, 1946 by Francis A. Snell of Chenango Forks, NY. One of the plastic inserts is cracked. (S278) PAT.

PiCs Lots CB 133 thru 136

Choice Box 137: Lot of: Five Automotive Type Adjustable Wrenches
(1.) 11 AUTO - MADE IN USA / 20 - - 11".
(2.) Unmarked - - 9".
(3.) CARR MFG. CO. - KANSAS CITY, MO. - - 9.25". Haven't seen this one before.
(4.) WAKEFIELD NO. 19 - PAT'D NOV 14, 1922 - MADE IN WORCESTER, MASS. USA. - - 9.25".
(5.) HERBRAND (script) - - 7".

Choice Box 138: Lot of: Seven Alligator and Ratchet Wrenches
(1.) W & B logo (Whitman & Barnes) - MADE IN USA / BULL TERRIER - - 5.t". Pitted.
(2.) Weak markings, can't read. - - 7" double ended alligator wrench.
(3.) HACKETT / 102 - - 6.75" double ended alligator wrench with pebble finish. Some pitting. (not listed, no info)
(4.) W & B logo (Whitman & Barnes) - MADE IN USA / 1-3/4 BULLDOG - - 7" single ended alligator wrench.
(5.) RAISE / LOWER - - 8.75" 1/2" female square drive ratchet.
(6.) DURO METAL PRODUCTS CO, - CHICAGO -672 - PATENT PENDING - - 9.5" 1/2" female square drive ratchet.
(7.) WALDEN WORCESTER OR916 / MADE IN USA - - 10.5" 1/2" female square drive ratchet.

Choice Box 139: Lot of: Six Automotive Tools
(1.) BLUE-POINT - - GA-44 - - 11.5" flywheel rotating tool,
(2.) TIRE CARRIER WRENCH / 678225 (with backward "S" logo) (Studebaker Truck wrench) - - 9" Good++.
(3.) BLACKHAWK 4219X - 9/16 - 9/16 - - 11" automotive specialty wrench square socket by odd open end. For Ford "T" connecting rod clamp screws and main bearing bolts.
(4.) J4 / "A" in a circle logo - - 6.75" Chevrolet spinner type lug wrench. Good++.
(5.) Unmarked - - 6.5" double box end. Shop made?
(6.) Unmarked - - 7.5" bicycle or motorcycle tire tool.

PiCs Lots CB 137 thru 139

Choice Box 140: Lot of: Ten Automotive Type Wrenches
(1.) Unmarked - - 13.5" offset square socket wrench.
(2.) Ford (script) - 57817 - - 10.5" offset double hex Ford Model T service wrench for carburetor and generator bolts.
(3.) Unmarked - - 7.5" open end by hex socket.
(4.) DRIVER (underlined) / 1/8 - 3/16 - DROP FORGED - - 4.25" doe.
(5.) Unmarked - - 7" open end by hex box end.
(6.) Unmarked - -14.5" specialty wrench for? Offset single open end.
(7.) SKF (orphan) - - 8.25" stamped steel hook spanner.
(8.) Unmarked - - 6.5" stamped steel hook spanner and open end by odd opening.
(9.) Ford (script) / T5893 - - 10" Model "T" sparkplug and cylinder head wrench.
(10.) 2372 (Fordson Tractor) - - 11" double hex socket.

Choice Box 141: Lot of: Nine Automotive Type Wrenches
(1.) 666918 - - 5.25" stamped steel hook spanner wrench.
(2.) Unmarked - - 6" hook spanner by two open ends and a hex box.
(3.) DIN 894 - WEST GERMANY - 22 - - 7.5" soe.
(4.) Unmarked - - 6" double hex socket wrench with offset ends,
(5.) 102 - - 9" doe with one end offset.
(6.) BONNEY - USA - 2541 - 9267 - ET (date code) / CHROME-VANADIUM (with a "CV" in a circle logo - - 10.5" double offset open end. Specialty wrench for early Studebaker brakes.
(7.) Ford (script) - - 10" Model "T" sparkplug and cylinder head wrench.
(8.) 1850 - WALDEN WORCESTER - PAT MAY 5, 25 - 21/32 - 3/4 - - 14" with one double and one single swivel hex sockets.(patent not found)
(9.) MERIT / 27 - 15/32 - 11/16 - - 6" double open end.

Choice Box 142: Lot of: Eight Early Automotive Double Open Ended Wrenches (Seven Dodge Brothers and one Merit)
(1.) Q1191 - 11 - 3/4 - 7/8 - - 7.75".
(2.) Q1191 - 21 - 3/4 - 7/8 - - 7.75".
(3.) Q1191 - 23 - 3/4 - 7/8 - - 7.75".
(4.) Q1191 - 12 - 3/4 - 7/8 - - 7.75".
(5.) MERIT / 31 - 25/32 - 7/8 - - 8".
(6.) Q6165 - - 6".
(7.) Q6165 - 9/16 - 5/8 - - 6".
(8.) Q6165 - 12 -9/16 - 5/8 - - 6".

PiCs Lots CB 140 thru 142

Choice Box 143: Lot of: Eight Automotive and Related Wrenches
(1.) HERBRAND (script) USA / DUST CAP WRENCH NO. 1760 - - 8" double twelve point box end wrench.
(2.) No. 645 - MADE IN THE U.S.A. - PAT DEC. 28, 1915 and two Mossberg logos. - - 6" Hex ratchet wrench for Ford "T" reverse and brake pedals adjustment. PAT.
(3.) R4564 - WALDEN-WORCESTER - USA / GUARANTEED FOR USE ON FORD BRAKE AND REVERSE BANDS ONLY - - 6.25" Hex ratchet wrench.
(4.) 90257 (Delco) - SPARK PLUG - GEN. NUT / CYLINDER STUD - BATTERY NUT - - 7.75".
(5.) 90257 (Delco) - SPARK PLUG - GEN. NUT / CYLINDER STUD - BATTERY NUT - - 7.75".
(6.) Red Head (in script) PLUG WRENCH / EMIL GROSSMAN CO. - DETROIT - NEW YORK - CHICAG0 - - 5.25" steel single hex sparkplug wrench.
(7.) FORD (script) / (Moore's "M" in a circle logo) - - 6.75" slip joint pliers with screwdriver end.
(8.) MUSSELMAN UNIVERSAL BICYCLE WRENCH - USA - - 6" flat steel with six different wrenches including a spanner. (S1064)

Choice Box 144: Lot of: Five Steel Hubcap Wrenches
(1.) Unmarked (Hudson and Essex) - - 12.75"
(2.) Unmarked (orphan) - - 9"
(3.) Unmarked (Buick) - - 9.75"
(4.) Unmarked (orphan) - - 13.75"
(5.) Unmarked (Dodge Brothers) - - 11"

Choice Box 145: Lot of: Five Steel Hubcap Wrenches
(1.) Marked only "A" (Chevrolet) - - 8.5"
(2.) Marked only "H" (Ford "T") - - 8.25"
(3.) Unmarked (orphan) - - 9"
(4.) Marked only "S" (Chevrolet) - - 8.5"
(5.) Unmarked (Dodge, Plymouth, De Soto) - - 9"

PiCs Lots CB 143 thru 145

Choice Box 146: Lot of: Six Automobile Hubcap Wrenches
(1.) 3850 (Crow-Elkhart Motor Corp. of Elkhart, Indiana) - - 10.5". Malleable. Some light pitting.
(2.) 15086 with triangle logo (orphan) - - 12". Malleable. Excellent.
(3.) Marked only "H" (Ford) - - 8.5". steel.
(4.) Unmarked - - 9.75". Steel with face spanner pets.
(5.) Unmarked - - 8.75". Steel.
(6.) Unmarked - - 7". Steel.

Choice Box 147: Lot of: Six Adjustable Wrenches
(1.) B & C (Bemis & Call_ / 10 IN. - - 10" curved handle Crescent type. Open handle variation.
(2.) WESTCOTT - THE KEYSTONE MFG. CO. / THE KEYSTONE MFG. CO.- 8 INCH NO. 78 - BUFFALO, NY USA - - 8" Curved handle Crescent type adjustable closed handle variant. Good+.
(3.) BEMIS &: CALL CO. - 8 IN 48A / B & C - SPRINGFIELD MASS USA - - 8". Curved handle Crescent type adjustable wrench (closed handle variation). Good+.
(4.) THE ELGIN - PAT JUNE 8, 97 - EXTRA JAW 25¢ - - 7. Good+.
(5.) BOOS TOOL CORP - CHROME-MOLYBDENUM - K.C. MO. - PATENTED - - 6.5" Turn Handle To Adjust wrench. Both jaws are smooth variation. Good++. (see S381) PAT.
(6.) NO. 7 - BMC MFG. CORP. - BINGHAMTON, NY - PATENT APPLED FOR - - 7" Locking Pliers. Patented Feb. 19, 1946 by Francis A. Snell of Chenango Forks, NY. Good+. (S278) PAT.

Choice Box 148: Lot of: Five Automobile Hubcap Wrenches
(1.) Unmarked (EMF. Studebaker) - - 8.5". Forged.
(2.) 3850 (Crow-Elkhart Motor Corp. of Elkhart, Indiana) - - 10.5". Malleable.
(3.) 211744 (Franklin Automobile Co.? - Syracuse, New York) - - 13". Malleable,
(4.) INDESTRO MFG. CO. (script) - CHICAGO - TEMPERED STEEL - - 8,5". After market Ford Model "T" wrench.
(5.) X24 - C (orphan) - - 12.75". Malleable.

PiCs Lots CB 146 thru 148

Choice Box 149: Lot of: Five Automotive Tools
(1.) OTC (Owatonna Tool Co. - Owatonna, Minn.) - - 10" thread chaser with five different size SAE dies. Good++.
(2.) BLUE-POINT (Snap-On Tools) - - 7.5" battery thermal spreader.
(3.) CAL-VAN 452 - USA / PAT. 3,013,456 - - 9" hose clamp pliers with locking lever. Patented Dec. 19, 1961 by Alf Ernferd Ericson of Lapeer, Mich. PAT.
(4.) Unmarked - - 7.5" battery thermal spreader.
(5.) ARMSTRONG / 41-W-986 - - 5.25". Military issue for WW II era Jeeps.

Choice Box 150: Lot of: Three Shop Made Tools. No. 1 is a shop made blacksmith clamp that was made to fit an anvil pritchel hole.

Choice Box 151: Lot of: Six Shop Made or Modified Tools. Including a log pike, bearing scraper, three wrenches and a soldering iron with a home made handle.

PiCs Lots CB 149 thru 151

Choice Box 152: Lot of: Seven Pliers
(1.) Unmarked - - 7" pliers with wire cutters and screwdriver end.
(2.) Marked only USA (with very high relief letters) - - 6.5" slip joint pliers with wire cutters.
(3.) Unmarked - - 7.25" pliers with hammer head, wire cutters and screwdriver end.
(4.) BUHL SON / ("B" in a circle logo) - - 6.5" slip joint pliers with wire cutters and screwdriver end.
(5.) McKAIG- HATCH - BUFFALO, NY / PAT'D. NOV 3, 1914 - - 7" slip joint pliers with wire cutters and screwdriver end. Patent was issued to Archibald McKaig, Sr. of Buffalo, NY. for the wire cutter. PAT.
(6.) K25 Diamond (and diamond logo) - DULUTH, USA (horseshoe logo) - - 6.5" slip joint pliers with wire cutters.
(7.) Unmarked - - 5.5" diagonal cutting pliers.

Choice Box 153: Lot of Six Threaded Shaft Screw Adjust Combination Nut & Pipe Wrenches. (all with wooden handles)
(1.) Bemis & Call / N.P.R. (Narragansett Pier Railroad) - - 16".
(2.) Bemis & Call - G.N. RY. (Greenfield & Northern Railway) - - 12"
(3.) Bemis & Call - - 13".
(4.) ERIE TOOL WORKS - ERIE, PA. USA - - 11"
(5.) Bemis & Call - - 11".
(6.) Bemis & Call - - 11".

Choice Box 154: Lot of: Six Threaded Shaft Screw Adjust Nut Wrenches
(1.) Unmarked - - 8" all metal.
(2.) Bemis & Call - - 8" 10" with wooden handle.
(3.) Bemis & Call - - 10" with wooden handle.
(4.) Bemis & Call - - 12" 10" with wooden handle.
(5.) Bemis & Call - - 12" 10" with wooden handle.
(6.) Bemis & Call - - 12" all metal.

PiCs Lots CB 152 thru 154

Choice Box 155: Lot of: Six Wooden Handles Monkey Wrenches
(1.) Can't read markings - - 10" with knife type handles. Poor.
(2.) SOLID BAR - PAT JAN 14, 1869 - - 10" with knife type handles. Poor.
(3.) L. COES & CO WORCESTER, MASS / L. COES PAT'D JUNE 26, 1866 - MAR 23, 1869 - - 10". with new handle. (HP26)
(4.) P. S. & W. DO. (Peck, Stow & Wilcox) SOLID BAR - PAT. JAN. 14, 96 - - 10" with knife type handle.
(5.) L. COES & CO. with 1880 and 1884 patent dates.- - 10" with knife type handle. (HP43)
(6.) E. C. SIMMONS - KEEN KUTTTER logo - BLACK JACK - SOLID BAR - PAT JAN. 14, 96 - - 10.5" with wood knife type handle. Good.

Choice Box 156: Lot of: Six Wood Handled Monkey Wrenches
(1.) P. S. & W. TOOLS (with fist and hammer logo) (Peck, Stow & Wilcox) - SOLID BAR - PAT JAN 14, 1869 - - 15" knife type handle.
(2.) Whitman & Barnes mfg. co. - - 15" all wood handle with ridged adjusting screw knob. Good+.
(3.) Can't read markings - - 12" knife type handle
(4.) H. D. SMITH PERFECT HANDLE - - 13" knife type handle
(5.) W & B Co. (Whitman & Barnes) - - 12" knife type handle. Good++.
(6.) L. COES MFG. CO. - WORCESTER MASS. - - 12" with knife type handle. Rare Coes wrench, the L. Coes Mfg. Co. imprint was only used for a short time. Good+. (HP44)

Choice Box 157: Lot of: Five Wooden Handled Monkey Wrenches
(1.) Unmarked - - 10" with all wood handle.
(2.) P. S. & W. CO. (with fist and hammer logo) (Peck, Stow & Wilcox) - SOLID BAR - PAT JAN 14, 1869 - - 10" with knife type handle.
(3.) L. COES PAT'D DEC 15, 1891 - APR. 30, 1895 - - 10" with knife type handle and handle ferrule extensions. Fair. (HP50)
(4.) B & C (Bemis & Call) / BILLINGS - - 10". Dual marked with knife type handle.
(5.) COES WRENCH CO - WORCESTER, MASS / L. COES PATD. JULY 6, 1880 - JULY 8, 1884 - - 10" with knife type handle. Good+. (HP45)

PiCs Lots CB 155 thru 157

Choice Box 158: Lot of: Seven IHC Wrenches
(1.) H523 (McCormick, later IHC) - - 8" double open ended S-wrench. Severe pitting.
(2.) P890 (Osborne - IHC) - - 7.25". Severe pitting.
(3.) 271N / (IHC logo) - - 6" x 6.5". Tee socket wrench. Good++.
(4.) H523 1/2 (IHC) - - 6.5" double open end S-wrench issued with International Harvester Auto wagons, early gas engines, and threshing machines. Good+.
(5.) 15226-D (IHC logo) - - 6.25" spanner. Light markings,
(6.) 1E - 2E (IHC part 4E) - - 9.25" monkey wrench. Pitted.
(7.) 5082T / A with an IHC logo - - 6" double socket listed for early International Trucks and Gas Engines. Good+.

Choice Box 159: Lot of: Seven IHC Wrenches
(1.) Marked only with two IHC logos and 2E - - 9.25". This is the IHC part No. 4E monkey wrench usually found marked "1E" and "2E". Rare marking variation. Excellent.
(2.) P & O CO - CANTON ILL / 2715 - - 9.5". All markings raised. Not cleaned.
(3.) Unmarked (IHC HD721) - - 8.25" loop handled screw driver. Good++.
(4.) D420 - D. M. O & CO. (D. M. Osborne & Co. - Auburn, NY, later IHC) - - 5.25". Weak markings.
(5.) P28 (IHC, earlier Plano) - - 8.25". Pitted.
(6.) H523 1/2 (IHC) - - 6.5" double open end S-wrench issued with International Harvester Auto wagons, early gas engines, and threshing machines. Excellent.
(7.) 11858-DA (IHC logo) - - 5.5" flat steel hook spanner for Farmall tractor water pumps. Good++.

Choice Box 160: Lot of: Seven Wrenches. Scratch and Dent Sale No. 1 (all have damage, pitting, etc.)

PiCs Lots CB 158 thru 160

Choice Box 161: Seven Wrenches. Scratch and Dent Sale No. 2 (all have damage, pitting, etc.)

Choice Box 162: Lot of: Seven Wrenches. Scratch, Dent and Remainder Sale No. 3 (most have damage, pitting, etc.)

Choice Box 163: Lot of: Eight Wrenches. Scratch and Dent Sale No. 4 (all have damage, pitting, etc.)

PiCs Lots CB 161 thru 163

Choice Box 164: Lot of: Lot of: Six Wrenches. Scratch and Dent Sale No. 5 (all have damage, pitting, etc.)

Choice Box 165: Lot of: Lot of: Six Wrenches. Scratch and Dent Sale No. 6 (all have damage, pitting, etc.)

Choice Box 166: Lot of: Four Assorted Wrenches
(1.) 1E - 2E (with IHC an McCormick logo) (IHC part 4E) - - 9.25" monkey wrench. Solid handle variation. Good+.
(2.) 90258 (Delco) - CONN. ROD NUT / CYL. HEAD - COVER PLATE - - 7". Good+.
(3.) FORD (script) USA-M-40-17017 - - 9.75" Open end with flange by six point box end. For 1933-34 Ford cylinder heads and spark plugs .
(4.) FORDSON - 2 - - 6" doe. Good++.

PiCs Lots CB 164 thru 166

Choice Box 167: Lot of: Six Assorted Wrenches
(1.) Marked R34827R MADE IN USA (John Deere) - - 18.5". (D510)
(2.) JOHN DEERE (B353R) - 15.75" Flat shaft, with twelve point and six point box ends. Good+. (D248)
(3.) 363021R1 (IHC)- 1-5/16 - 1-1/8 with IH logo - - 18" double box end. Some light pitting.
(4.) Marked only MADE IN USA (JOHN DEERE B353R) - - 19". Good++. (D250)
(5.) Unmarked (C20 - Gale and P. P. Mast) - - 9" oddball. Severe pitting.
(6.) GALE / DG848 - - 9" flat steel. Pitting. (R1-193)

Choice Box 168: Lot of: Six Assorted Wrenches
(1.) VIKING - A - - 9" malleable fire sprinkler wrench. Excellent.
(2.) Unmarked - - 10.25" triple socket automotive type wrench. Good++.
(3.) LEADER - - 9" malleable spud type wrench. Excellent.
(4.) VICTOR -ARMSTRONG (with arm and hammer logo) / RT20 - - 8.75" welding bottle wrench. Excellent.
(5.) Unmarked - - 6.5" center screw adjust nut wrench. Pitted.
(6.) Can't read the markings on this severely pitted 7.25" Gordon Automatic quick adjust nut wrench.

PiCs Lots CB 167 and 168

Choice Box 169: Lot of: Nine Pliers. Some collectible brand names, all good users.
(1.) CEE TEE - JAMESTOWN, NY USA - - 10". I didn't know they made Cee Tee pliers this big. Good++.
(2.) V & B CO. - CHICAGO (Vaughan & Bushnell) - - 7" nut wrench pliers with wire cutters. Good++.
(3.) FULLERS - DROP FORGED - ENGLAND - - 6.5" diagonal cutting pliers. Good+.
(4.) Can't read all the markings, ends with SONS - - 6.25" flat nose pliers. Good+.
(5.) P. S. & W. CO. (Peck, Stow & Wilcox) - USA - 240-7 - - 7.25" lineman's type pliers. Good++.
(6.) KRAUETER 1641-6-1/2 - - 6.5" pliers with three wire cutters/ Excellent.
(7.) GLOBE MASTER - NO, 60160 USA - - 7" angled needle nose pliers.
(8.) WILLIAMS NO. 46 USA - - 6.25" diagonal cutting pliers. Good++
(9.) DIAMOND - DULUTH USA K35 (with diamond and horseshoe logo) - - 6.5" slip joint pliers. Excellent with plated finish.

Choice Box 170: Lot of: Ten Pliers
(1.) Unmarked - - 9.25" light duty pliers with a hammer head and wire cutter. Good.
(2.) TORO - MADE IN USA - - 6" flat nose pliers with two wire cutters similar to the more common Lodi pliers. Good+.
(3.) McKAIG - HATCH INC. BUFFALO N.Y USA (with logo) - - 7" pliers with wire cutter, hammer head and screwdriver end. Excellent.
(4.) LODI - - PAT. SEP. 25, 94 - RE. NOV. 6, 1900 - - 6" light duty flat nose pliers with two side wire cutters. Patented by William A. Bernard of New Haven, Conn. Good++. PAT.
(5.) LODI - PAT. SEP. 25, 94 - RE. NOV. 6, 1900 - - 4.5" miniature flat nose pliers. See No. 4 above for patent info. Good++. PAT.
(6.) 47 DROP FORGED - - 6.5" slip joint pliers with shop modified with welded on jaw extension, one round bar and the other angle iron. Good+.
(7.) WALDES TRUARC PLIERS NO. 2 - - 5.75" light duty pliers with a set screw. Older snap-ring pliers?. Good++.
(8.) Markings too small and weak to read - - 8" lineman's type pliers with a wire cutter, crimper and an odd wedge shaped plate on one side below the jaws. Good
(9.) H & H (in a diamond logo) - GERMANY - - 7.5" bicycle cone pliers with wire cutters and screwdriver end. Good++.
(10.) Unmarked - - 7.5" bicycle cone pliers with a screwdriver end. Excellent.

Choice Box 171: Lot of: Eight Plier Type Wrenches
(1.) V & B CO. - CHICAGO (Vaughan & Bushnell) - - 7" nut wrench pliers with wire cutters. Excellent.
(2.) Unmarked - - 7.25" combination fixed joint pliers with hammer head and screwdriver end. Good.
(3.) D. & H. Plier - - 7" fixed pivot combination pliers with heavy duty wire cutters and screwdriver end. Replaced pivot bolt nut, small drilled hole in end of handle.
(4.) RED DEVIL (Smith & Hemenway) 444-7-1/2 - GIANT GRIP - PAT APP'D FOR - - 8" slip joint pliers. Jaws have been factory? modified for a special purpose. Good++.
(5.) CHAMPION DEARMENT - MEADVILLE, PA USA - - 7.5" Tongue and groove pliers. Good+.
(6.) Unmarked - - 7" slip joint pliers with offset jaws. Looks like H. D. Smith's No. 646 "Gittatit" Offset Slip Joint Pliers. Good++.
(7.) McKAIG- HATCH INC. BUFFALO N.Y USA (with logo) - - 7" pliers with wire cutter, hammer head and screwdriver end. Excellent with plated finish.
(8.) Unmarked - - 7" slip joint pliers with screwdriver end. Good++.

PiCs Lots CB 169 thru 171

Choice Box 172: Lot of: Seven Plier type Wrenches
(1.) NO. 42-9 - W. SCHOLLHORN CO. NEW HAVEN, CONN. MDE IN USA - - 8.5" heavy duty slip joint pliers with hammer head and cutter. Good++.
(2.) MCKAIG DROP FORGE COMPANY - BUFFALO, NY (predecessor of McKaig-Hatch, Inc) / MCKAIG PAT. APLD. FOR - - 7.5" slip joint pliers with cutter and screwdriver end. Patent issued to Archibald McKaig, Sr. of Buffalo, NY on Nov. 03, 1914. Good+. PAT.
(3.) ADAMS STEEL - DROP FORGED - - 10" slip joint pliers with cutter and screwdriver end. Good+.
(4.) UNMARKED - - 6.5" fixed joint pliers with three cutters.
(5.) H & H (in a diamond logo) - GERMANY - - 7.5" bicycle cone pliers with wire cutters and screwdriver end. Good++.
(6.) KANSAS CITY - - 6.5" slip joint pliers with cutter and screwdriver end. Good++.
(7.) U. S ? ? ? - OMAHA, NE. (can't read all the markings) - - 7.75" slip joint angled nose pliers with cutters and screwdriver end. Good+ with weak markings.

Choice Box 173: Lot of: Eight Pliers Type Wrenches
(1.) PEXTO (in an oval logo) - 15-N - MADE IN USA - - 5.5" slip joint pliers with wire cutter. Good++.
(2.) Unmarked - -7" heavy duty end nipper. Good+.
(3.) Unmarked - - 6,25" nut wrench pliers with wire cutters. Good+.
(4.) Unmarked - - 6" round nose pliers, Good+.
(5.) "IDEAL" PAT JUNE 18, 1907 - - 6.5" specialty pliers with a knife like blade and finger guards. Good++. (not listed, patent not found
(6.) FORD (script) 6.5" slip joint pliers with screwdriver end. Good+.
(7.) BRUNO WILL - GERMANY - - 6.5" slip joint pliers with wire cutter. Good+.
(8.) GRIPKUT JUNIOR - PATS PENDING / KRAEUTER - Newark, N.J. USA - NO. 1973 - 5-1/2 - - 5.75" slip joint pliers with wire cutters. Good+ with plated finish.

Choice Box 174: Lot of: Seven Assorted Wrenches
(1.) 151 BLACK HAWK - 6 - MADE IN USA - - 9.25" mult-head turn handle collar to adjust automotive drain plug wrench. Good++.
(2.) Unmarked - - 10.5" mult-head turn handle to adjust automotive drain plug wrench. Good+.
(3.) 151 BLACK HAWK - MADE IN USA - - 9.25" mult-head turn handle collar to adjust automotive drain plug wrench. Good+.
(4.) BLACK HAWK - MADE IN USA - 3 - 151 - - 9.25" mult-head turn handle collar to adjust automotive drain plug wrench. Good+.
(5.) LAKE SUPERIOR WRENCH COMPANY - SAULT STE MARIE, MICHIGAN - - 13" self adjusting nut and pipe wrench. Patented 9-7-1909 by William Hilliard Munro of Sault Ste. Marie, Ontario, Canada and 10-4-1910 by John Boulieu of Sault Ste. Marie, Mich. Pitted. (S362) PAT.
(6.) LOVE MFG. CO. / ROCKFORD ILLS / PAT JULY 6, 1897 - - 12" tongs type tool made especially for gripping windmill pump rods. Patent granted to Martin M. Billmire of Ashton, IL. Good++. PAT.
(7.) Marked only 9" - - 9.25" "Footprint" type plier wrench. Good+.

PiCs Lots CB 172 thru 174

Choice Box 175: Lot of: Six Assorted Wrenches
(1.) LOVE MFG. CO. / ROCKFORD ILLS / PAT JULY 6, 1897 - - 12" tongs type tool made especially for gripping windmill pump rods. Patent granted to Martin M. Billmire of Ashton, IL. Good user. PAT.
(2.) MADE BY THE LOWNES MFG. CO. - HUNTSVILLE, ALA. / PATENTED APRIL 23, 1889 - FEB 10, 1891 - - 12.5" all metal pipe wrench with a rotating center section that allows the upper jaw to be inserted vertically or horizontally. Patents issued to Sidney Cook and Phineas Lownes. Good with some weak markings. (S612) PAT
(3.) Unmarked - - 9" self adjusting pipe wench with split upper jaw. Good++.
(4.) BLACK HAWK - MADE IN USA - 3 - 151 - - 9.25" mult-head turn handle collar to adjust automotive drain plug wrench. Good.
(5.) X-X / T31005 - - 10" bulk tank valve handle.
(6.) F R11 - - 8" heavy cast What's It.

Choice Box 176: Lot of: Two Alligator wrenches and Four Gas Pipe Pliers
(1.) THE HAWKEYE - HAWKEYE WRENCH CO. MARSHALLTOWN, IA / PAT. 720554 - PAT'S PENDING - - 8.25" alligator wrench with rethreading dies. Patented by Charles Benesh of Wahpeton, North Dakota on Feb. 17, 1903. Excellent. PAT
(2.) V & B MACH, CO, ((Vaughan & Bushnell))- NO. 12 - PAT. JULY 26, 89 - - 5.5" alligator wrench plus several different sized wrench cutouts. Patent issued to Lemuel M. Bushnell and Sanford S. Vaughan of Chicago. Excellent. PAT.
(3.) Unmarked - - 8.25" gas pipe type pliers with screwdriver end from a company better known for their spoke shaves. Good++.
(4.) W. JOHNSON - NEWARK, N.J. - - 7.25"
(5.) Unmarked - - 6.5" gas pipe type pliers. Good.
(6.) Unmarked - - 6" gas pipe type pliers. Good.

Choice Box 177: Lot of Three: Misc. Stuff
(1.) 312-FB - GOULD IMPERIAL - PATENTED USA - - 6.5" tubing cutter and deburrer. Missing cutter wheel.
(2.) Unmarked - - 5.5" copper lawn sprinkler head.
(3.) LANGLEY FISHERMAN'S DE-LIAR - SAN DIEGO, CALIF. MODEL 228 - PATENTED - - 3.5" fisherman's tape measure and scale. Excellent.

PiCs Lots CB 175 thru 177

Choice Box 178: Lot of Nine: An Assortment of Assorted Tools
(1.) Unmarked - - 17" malleable pig birthing tongs.
(2.) Unmarked - - 26.5" five prong fish spear or gig.
(3.) BRIDGEPORT HARDWARE MFG. CO. - BRIDGEPORT, CONN. U.S.A - - 12.5" all metal hatchet, hammer and nail puller with a rubber covered handle and sheath.
(4.) Marked only TAIWAN - - 26" US Army type trenching shovel.
(5.) Unmarked - - 12" hatchet/pick?
(6.) Unmarked - - 19" What's It. Some kind of puller?
(7.) R. LINES (with Woodings-Verona Tool Co's W, V, and T logo) - - 22.5" double open ended S-type railroad wrench
(8.) MOPRY (Missouri Pacific Railway) - - 15.75" shop made double open ended railroad wrench.
(9.) RI - 2-1.2 / WARREN-TEED 38 - - 5" sledge hammer (head only, no handle)

PiCs Lot CB 178

Choice Box 179: Lot of: Fourteen 8" wood handle monkey wrenches. Brands include Coes (one is a jog bar style with steam engine governor logo). P. S. & W., H. D. Smith (Perfect Handle), Etc.

Choice Box 180: Lot of: Twelve (most are 8") all metal monkey wrenches. Brands include: Billings, Bemis & Call, Girard, J. H. Williams/W & B (Union Pacific RR), Coes, Pexto, E. C. Simmons Keen Kutter (Black Jack), Trimo, Lamson & Sessions, Etc.

PiCs Lots CB 179 thru 180

Choice Box 181: Lot of: Eleven 8" wood handle monkey wrenches. Brands include: Russwin (Perfect Handle type), Coes, Whitman & Barnes, and H. D. Smith (Perfect Handle)

Choice Box 182: Lot of: Ten 8" wood handle monkey wrenches. Brands include. Whitman & Barnes, Coes (one is a jog bar style with steam engine governor logo), Girard, P. S. & W., Simmons Hardware (Never Slip), Etc.

PiCs Lots CB 181 thru 182

Choice Box 183: Lot of: Nine Bicycle, Motorcycle and Pocket Type Wrenches. All unmarked except No. 7 is a BARNES TOOL CO. in Excellent condition with plated finish.

Choice Box 184: Lot of: Nine Unmarked Bicycle, Motorcycle and Pocket Type Wrenches

Choice Box 185: Lot of: Six Smaller Automotive Type Wrenches. Range from 5" to 6.75" long.

Choice Box 186: Lot of: Six English Wrenches. Most are King Dick Types.
(1.) SHELLBY - - 6". Good+.
(2.) BRITISH MADE - B299 / A1093 - - 6.5"
(3.) MADE IN ENGLAND - - 6.75" automotive type. Good++.
(4.) BRITISH MADE - - 4.5". Good+.
(5.) KING DICK - - 4.25". Good+.
(6.) BRITISH MADE - KING DICK - - 4.25". Good++.

PiCs Lots CB 183 thru 186

Choice Box 187: Lot of: Six Billing & Spencer Bicycle, Motorcycle and Automotive Type Wrenches
(1.) Early (Model E) - - 7".Good++.
(2.) Model E - - Good.
(3.) MADE FOR POPE MFG. CO. - - 5"Good+.
(4.) B & S - - 6.5" automotive type with angled jaws. Excellent.
(5.) B & S - - 6.5" automotive type with straight jaws. Good
(6.) B & S - - 5.75". Early scarce type with unsupported adjusting worm. Good+ with stamped former owner's id "W. C. JAY."

Choice Box 188: Lot of: Six Billing & Spencer Bicycle, Motorcycle and Automotive Type Wrenches
(1.) Model E - - Good++.
(2.) B & S - - 4.25". Early type with exposed shaft on one side. Good++.
(3.) Model 97 - - 4.25". Good++.
(4.) Model A - - 4.5". Excellent.
(5.) Model 97 with Sept. 29, 1896 patent date on reverse side - - 4.25". Scarce marking variation. Good++. PAT.
(6.) B & S - - 4.25". Early type with exposed shaft on one side. Good++.

Choice Box 189: Lot of: Seven Mossberg Bicycle and Pocket Type Wrenches
(1.) STERLING NO. 2 - - 6.5". Good++ with stamped former owner's id "L. S. HERTHA".
(2.) STERLING NO. 1 - - 5". Good++.
(3.) F-1 - - 5". Good++.
(4.) DIAMOND NO. 10 - - 5". Excellent.
(5.) A-1 (on upper jaw) - - 5". Good+.
(6.) B-1 - - 5". Good++.
(7.) STERLING - - 5". Good with some grind marks.

Choice Box 190: Lot of: Seven Mossberg Bicycle and Pocket Type Wrenches
(1.) STERLING NO. 2 - - 6.5". Good+.
(2.) A-1 (on shaft) - - 5". Good+.
(3.) STERLING NO. 1 - - 5". Good+
(4.) Model D Attleboro, Mass. - - 4".Good++.
(5.) A-1 (on upper jaw) - - 5". Good+.
(6.) A-1 (on shaft) - - 5". Good+
(7.) DIAMOND NO. 10 - - 5". Good+.

PiCs Lots CB 187 thru 190

Choice Box 191: Lot of: Seven Bicycle and Pocket Type Wrenches
(1.) THE BECKLEY-RALSTON CO. - CHICAGO - - 5.25". Good+.
(2.) PAT AUG 2, 1921 - MADE IN USA - - 5.75". Good+. PAT.
(3.) PAT AUG 2, 1921 - MADE IN USA - - 5.75". Good+. PAT.
(4.) BARNES TOOL CO. - - 5.25" with male square wrench tab. Good+.
(5.) L. & S (Lamson & Sessions) - BUCKEYE - - 5.5". Excellent.
(6.) W & B CO. - DIAMOND (in diamond logo) MADE IN USA - - 5.5" with twin grooved handle. Good+ (S98D2)
(7.) L. & S (Lamson & Sessions) - BUCKEYE - - 5.5". Good+.

Choice Box 192: Lot of: Seven Bicycle and Pocket Type Wrenches
(1.) BARNES TOOL CO. - - 5.5". Good+.
(2.) IVER JOHNSON - - 5.5". Good++.
(3.) WAKEFIELD MADE IN USA / PATENTS PENDING IN USA AND FOREIGN COUNTRIES - - 5". Good+ with former stamped owner's initials "L.K."
(4.) CHARLES E. HALL CO. - BUFFALO, NY USA - NO. 1 (with logo) - - 5". Fair.
(5.) WAKEFIELD B-1 - MADE IN WORCESTER, MASS. U.S.A. - - 5" . Good+.
(6.) FAIRMOUNT CLEV. O - - 5.25" automotive type. Good+.
(7.) PAT. APL'D FOR - - 6". Good++. PAT.

Choice Box 193: Lot of: Eight Bicycle and Pocket Type Wrenches
(1.) ELASTIC TIP CO - - 5.5". Excellent with plated finish.
(2.) BASRCALO-BUFFALO -MADE IN U.S.A. - - 5". Good.
(3.) IVER JOHNSON - - 5.5".Good++, plain finish.
(4.) "L" in a keystone logo (Lakeside Forge Co, Erie, Penn) - - 5" with tire tool end. Good++.
(5.) THE A & B CO. (in a diamond logo) - - 4". Good+. (not listed, no info found)
(6.) HAYDEN'S - PAT. JUN 15, 80 - - 4". Good+. (not in Schulz, C161) PAT.
(7.) Unmarked - - 3.75" center screw adjust with skeleton handle. Advertised in 1897 by Peck, Stow & Wilcox as the "Star Bicycle Wrench". Good++. (S104)
(8.) Unmarked - - 3.5" center screw adjust with skeleton handle. Made of aluminum. Excellent, like new. (not listed, no info found)

PiCs Lots CB 191 thru 193

Choice Box 194: Lot of: Eight Ratchet Wrenches
(1.) Unmarked - - 10" reversible ratchet with 1/2" square drive plug. Good++.
(2.) FRANK MOSSBERG CO. NO. 350 - PAT. NOV. 11, 1913 - - 10". 3/4" Square female drive reversible ratchet. Poor.
(3.) FIRESTONE / FORGED IN U.S.A. - - 9.5" square male drive reversible ratchet. Good++.
(4.) INDESTRO MFG. CO. - CHICAGO - - 9.5". 1/2" square female drive ratchet with one socket. Good+.
(5.) MADE IN U.S.A. - PAT. PEND. - - 9" 1/2" square female drive ratchet Good+.
(6.) DURO METAL PRODUCTS CO. - CHICAGO0 -672 - PATENT PENDING - - 9.25". 1/2" female square drive ratchet. Good+.
(7.) Marked only 105 - -7", 1/2" female hex drive ratchet. Excellent.
(8.) PLUMB (with two downward pointing arrows) / 5249 - made in U.S.A (all on shaft) and 5249 PROTO MFD. U.S.A. (on ratchet head) - - 7". 3/8" square male drive reversible ratchet with pebble finish. Excellent with former owner's id (two punched dots).

Choice Box 195: Lot of: Eight Ratchet and Socket Wrenches
(1.) GENERAL NO. 807-5X / GENERAL HARDWARE MFG. CO. INC. - NEW YORK - U.S.A. - - 4" ratcheting screwdriver with Phillips and straight bits. Good++.
(2.) Unmarked - - 13.5" reversible ratchet with an attached hex socket. Excellent.
(3.) Unmarked - - 10.5" cast 1" female hex drive socket with two square wrench opening in the handle. Good++.
(4.) PACKER RATCHER - NO. 4 - -13". 1/2" heavy duty ratchet with twin 1/2" square male drives. Painted red.
(5.) Unmarked - - 6.25" cast malleable hex socket with an L-handle. Good++.
(6.) SMP 15592053 - UP / 6B0771 - DOWN - -14". 5/8" female hex drive ratchet. Jack handle? Handle is bent.
(7.) U 15567645 - 3612 - UP / DOWN - - 15" 14". 5/8" female hex drive ratchet. Jack handle?
(8.) Marked only with a Hinsdale logo - - 8". Hex L-shaped socket driver with six sockets. Good.

PiCs Lots CB 194 thru 195

End of cataloged lots. There may be additional unlisted lots

Back To The Wrenching News Homepage