0001. Empire - - 10.5". Rare wrench with pitting. (R1-164)

0002. 9275 (Geiser Mfg. Co. - Waynesboro, Penn.) - - 8" by 16.5" tee socket wrench. First one we have had to sell. Good+ with a few dings. (R3-91)

0003. ATHENS PLOW CO ATHENS TENNESSEE - T100 (with a "T" in a circle logo) - - 18.5". Excellent with some of the original finish. (R1-23)

0004. WRENCH FOR GOVERNOR 2463 (Stickney Gas Engines - Charles A. Stickney Co., St. Paul, Minn.) - - 18". Original not one of the knock offs that were cast a few years ago. Good++. (R2-253, under Russell & Co.)

0005. MOLINE - RD1975 (with an underlined "M" logo) - - 17.5". Good++. (R1-333)

0006. USE THIS WRENCH TO REMOVE COVER FROM INJECTOR - COMPOUND INJECTOR & SPECIALTY CO. - CHICAGO USA (all in large, bold markings) / 119 - - 15" cast single hex box end wrench. Good+. (not listed)

0007. NEBRASKA MFG CO / 26 - - 12". Rare Nebraska wrench. Good+ with some hammer dings. (R1-347)

0008. K36 (Oliver, also IHC) - - 12.25" with disk straightening slot.. Rare Oliver wrench. Also on the IHC List as one of the wrenches for Oliver implements that IHC sold in Canada. First one we have had to auction and only two shown on the IHC Wrench Owner's List. Green paint. (R2-264)

0009. KIRLIN / K115 (Kansas City, Missouri & Beattie, Kansas) - - 8.75". Pitting. (R1-285)

0010. SAMSON - 1892 - FOR WRIST PIN ONLY / FOR FRONT CAP BOX ONLY (Stover Mfg Co) - - 7.25" Stover Samson Windmill wrench. Good++ with filed owner's ID lines on edge, (R3-213)

PiCs Lots 1 thru 10

0011. UX5 / 1/2 (Gehl Bros. and Western Land Roller) - - 15". Lot of three wrenches, one painted green, one yellow and one red. Take your pick. Will be sold choice wrench. These wrenches are listed in both Gehl Brothers of West Bend, Wisc. and Western Land Roller Co. of Hastings, Nebraska parts books. Good++. (R2-112, R2-292)

0012. DAVID BRADLEY MFG WKS / BRADLEY ILL 105A - - 9.75" with hammer head. Good++. (R1-126)

0013. EVANS (The Evans Mfg. Co. - Hammond, New York) - - 11". Rare wrench with severe pitting. (R2-91)

0014. KING DRILL MFG CO (Nebraska City, Nebraska) - - 12". Good+, some pitting. (R1-282)

0015. L616 / "L" in a circle logo (Case T. M. Co, originally Emerson) - - 8.25" . Good++. (R1-83)

0016. B. F. AVERY & SONS - LOU. KY / E1014 - - 18". Some pitting. (R1-27)

0017. B.F. AVERY AND SONS G178 / LOUISVILLE KY USA (with a "S: in a circle logo) - - 12.5". Scarce B. F. Avery wrench, only the second one we have had to auction. Good+, few minor dings, races of original paint. (R1-27)

0018. B.F. AVERY AND SONS CO - C63 / LOUISVILLE KY USA - - 10" with hammer head. Good +. (R1-27)

0019. B. F. AVERY & SONS / AA38 (Louisville, KY) - - 10.5". Good+, some weak markings. (R1-27)

0020. B. F. AVERY & SONS - G176 / Louisville KY USA - - 9". Tight jaw crack, light pitting. (R1-27)

0021. B. F. AVERY & SONS / CHILLED PLOW - K209 (Louisville, KY) - - 9.25". (R1-27)

0022. RODERICK LEAN / DH41 - - 12". Good+. (R1-294)

0023. 1999 (Silver Mfg. Co. - Salem. Ohio) - - 13.5". Good+, minor grind marks. (R1-424)

PiCs Lots 11 thru 23

0024. 240T (orphan) - - 23.5". Long. narrow with center ridge on both sides. Good+ (not listed, no info found)

0025. 040736 (orphan) - - 17" heavy soe. Good+. (not listed, no info found)

0026. 1698403 (orphan) - - 11.5" double extended socket. Painted. (not listed, no info found)

0027. B127 (Same number as an American Plow Co. wrench but not same wrench pictured in Rathbone) - - 9.5". Good+. (see R2-11)

0028. Marked only with a large "P" (orphan) - - 11.5" oddball. Good++. (not listed, no info found)

0029. 07343 with an "A" in a circle logo (orphan) - - 9.5" extended double socket. Painted. (not listed, no info found)

0030. Lot of Two:
(1.) G11 (orphan) - - 9.25". Good++. (not listed, no info found)
(2.) 53D230 (orphan) - - 10". Good++. (not listed, no info found)

0031. W-10 (orphan) - - 12.75" handled hex socket. Good++. (not listed, no info found)

0032. Lot of Three:
(1.) 1214 (orphan) - - 7.5" (not listed, no info found)
(2.) S189 (orphan) - - 8.75". Light pitting, markings not clear. (not listed, no info found)
(3.) JWT (orphan) - - 6". Good++. painted, (not listed, no info found)

0033. Lot of Four Unmarked Oddball Orphans

0034. Lot of Two: Unmarked Oddball Orphans
(1.) 11.5" Good+.
(2.) 10.25". Crudely made, thick and heavy. Good+.

PiCs Lots 24 thru 34

0035. C151 (Rumely - La Porte, Ind.) - - 7.25". Good+. (R3-192)

0036. K35 BRADLEY LISTER - - 5.75". Good+. (R1-126)

0037. Lot of Two:
(1.) CHALLENGE (Batavia, Illinois mfg. windmills, gas engines, etc.) - - 7". Pitted. (R1-93)
(2.) E1015 (orphan) - - 9.75" by 10,25" L-shaped double socket wrench. Good++. (not listed, no info found)

0038. P4185 (Cockshutt Plow Co. - Brantiford, Ontario, Canada) - -10.5" octagon hub type wrench. Good+. (R1-107)

0039. SAGINAW SILO / FARMERS HANDY WAGON CO (Saginaw, Mich.) - - 8.5". Pitting. (R1-175)

0040. WOODS BROS SILO & MFG CO / THE HINGE DOOR SILO - - 8.5". Extended socket variant. Good++. (R1-496)

0041. Lot of Two: Chain Belt Co. Silo Type Wrenches
(1.) CHAIN BELT CO. 9/16 / MILWAUKEE WIS - -10.25". Excellent. (9/16" size not shown in Rathbone))
(2.) CHAIN BELT CO. 1/2 / MILWAUKEE WIS - - 8.75". Painted. (R1-92)

0042. INDIANA SILO CO (Anderson, Indiana) / 5/8 - - 11". Good+. (R1-249)

0043. 832A (David Bradley) - - 12.5" with hook spanner on one end. Good+. (R1-126)

0044. Lot of Four:
(1.) C250 (orphan) - - 11". Jaw corner crack. (not listed, no info found)
(2.) M555 (Massey-Harris) - - 5.25" Tight crack. (R1-312)
(3.) BAILOR PLOW CO / ATCHISON KAN. C49 - - 9.5". Bad casting on the part number. (R1-38).
(4.) Y103 (Rock Island Plow Co) with an "U" logo - - 7.5". Good. (R1-401)

0045. Lot of Three:
(1.) CHASE PLOW CO (Lincoln, Neb.) - - 10.25". No part number variation. Good++. (R1-97)
(2.) 138 (Eagle Mfg. - Kansas City, MO and Dallas, TX) / "U" logo - - 7.75" with small hammer head. Good++. (R2-84)
(3.) M518 (Emerson-Brantingham, later Case T. M. Co.) - - 6.25" pitman wrench. Good+. (R1-162)

PiCs Lots 35 thru 45

0046. Unmarked - - 8.5" hitch pin with thick cast three opening wrench. Good++.

0047. 32 (George W. Brown - Galesburg, ILL. and Wheel & Seeder Mfg. Co. - La Crosse, Wisc. - - 8.75" fancy hitch pin with three opening wrench. Good+, with some pitting, weak markings. (R1-66, R1-485)

0048. Marked only "PAT'D" - - 8.75". Rare hog ringer that makes a hog ring from a horseshoe nail and crimps it on the hog's nose. Patent was issued to Ozia A. Essig of Canton, Ohio on July 1, 1879. First one we have had to sell. Good++, not cleaned. (there is a whole page write-up on this tool on page 6 of Onie Sims' Hog Control book)  PAT

0049. D189-D190 with a star logo (Moline Plow Co) - - 7.5" corn planter check row pliers. Good++.

0050. WALLIS - 1763 - - 4.75" heavy, cast axle hubcap for Wallis Tractors. Some pitting.

0051. 1830C (with Case T. M. Co. eagle logo) - - 4.5" cast grease cup for Case Steam Engines. Good++.

0052. ALLIS CHALMERS MFG. CO. - LA CROSSE WORKS / 300755 - - 11.5". Good++ with most of the original finish. (R1-11)

0053. Lot of Five: Misc. Wrenches, Etc.
(1.) R. S. Co / CD82 (Racine-Sattley - Racine, Wisc.) - - 5.25". Painted. (R2-257)
(2.) 7322C with Eberhard's "E" in a circle logo - - 8" Excellent.
(3.) REMINGTON - - 5.75". Three openings with no hang hole variation. Good++. (variation not in Rathbone, see R1-393)
(4.) BRIDGE TOOL CO. / B - - 6.25" doe-s type. Good++. (see R1-63)
(5.) FOR BURR BOLTS (orphan) / 2247 - - 3.75" Tee handled square socket wrench. (not listed, no info found)

0054. F2-0005 (Oliver and Nichols & Sheppard) - - 6" by 8.75" tee socket wrench used on Hart-Carter threshing machine attachments, same as John Deere No. 31 wrench. (R2-217) Good++.

0055. Lot of Two:
(1.) D1 (Grand Detour Plow Co. and later J. I. Case Threshing Machine Co.) - - 11.75". Pitting. (R3-94)
(2.) H981 with a star logo - - 10" cast What's It with odd opening.

0056. B232 (Superior Drill Co - Springfield, Ohio, later Am. Seeding Mach. Co.) - - 8.5". Good++, not cleaned. (R1-446)

0057. 3329A with a "X" and Case Eagle logo (Case T. M. Co.) - - 8.5". Excellent, painted. (R1-82)

0058. SIMMONS - 6000 / UTILITY (E. C. Simmons Hardware Co. - St. Louis) - - 7,25" Deering style. Good+. (R1-426)

0059. J. S. H. & CO - 6000 / UTILITY (Janney, Semple, Hill & Co - Minneapolis MN) - - 7.25". Rare Deering style wrench. Good++. (R2-148)

0060. B M & S H CO / MOHAWK (Blish, Mize, and Silliman Hardware Co. - Atchison KS) - - 7.52" Deering pattern. Some pitting. (R2-21)

PiCs Lots 46 thru 60

0061. 4771 (Avery gas tractor, Peoria, ILL) - - 16.25" extended double socket. Slight twist, markings very light as usually found. (R2-18)

0062. Lot of Five: Ferguson, Harry Ferguson, Massey Ferguson, and Massey Harry Ferguson Wrenches. Four with the ruler markings to measure the plow furrow depth. Will be sold choice wrench.
(1.) 185931M1 (Massey-Ferguson) - -12.25" (R3-141)
(2.) FERGUSON - 180-108-M1 (marked on jaws) with ruler markings / 11/16 and 1-1/16 - - 10.5". Good++. (R1-178)
(3.) HARRY FERGUSON INC - TO-17014 - / (with ruler markings) - - 10.5". One of the harder to find wrenches of this type. Good++. (R1-178)
(4.) 180108M1 <MHF> (Massey Harry Ferguson) -11/16 - 1-1/16 (sizes marked on jaws) / ruler markings - - 10.5". Good++. (R2-164)
(5.) 180108M1 <MHF> (Massey Harry Ferguson) - 11/16 - 1-1/16 (sizes marked below jaws on shaft) / ruler markings - - 10.5". Some pitting. (R2-164)

0063. 3854 (Wallis Tractor Co., later Massey-Harris) - - 12" tee socket wrench. Good+, poor casting on the part number.. (R1-480)

0064. Lot of Two: Case Threshing Machine Co, Tractor Hubcap Wrenches
(1.) 01982AB (Case T. M. Co. - - 12.5" tractor hubcap wrench. Curved variant. Good+, not cleaned. (R1-78, mistakenly under Case Plow Works listing)
(2.) Marked only MADE IN USA ((Case T. M. Co) - - 11.25" flat steel version of the 01982AB Case T. M. Co. tractor hubcap wrench. Good++. (R1-78, R3-41, mistakenly under Case Plow Works listing)

0065. A3651 (orphan) with Dayton Malleable Iron Company's "D" in a circle logo) - - 14". Large oddball. Some minor dings, etc. (not listed, no info found)

0066. 1904 (orphan) - - 8.5" with six wrench openings, three holes, and high ribs. Reverse side is flat. Good+. (not listed, no info found)

PiCs Lots 61 thru 66

0067. Lot of Two: Threshing Machine Cylinder Tooth Wrench and Straighteners.
(1.) Unmarked (Woods Bros Thresher Co. - Rushford, Minn. later Des Moines, Iowa) - - 21.25" Weld repair. (R2-302)
(2.) 212 (orphan) - - 23.5" threshing machine cylinder tooth wrench and straightener. (not listed, no info found)

0068. X899 (Aultman-Taylor - Mansfield, Ohio)- - 23.5" threshing machine tooth wrench and straightener. Good Plus. (R-204, listed mistakenly as Minneapolis Threshing Machine Co.)

0069. CASE / 0205T1 (with Case Eagle logo - Case T. M. Co.) - - 21.25" threshing machine cylinder tooth straightener. Mushrooming on pry bar end. (R1-82)

0070. M451D (IHC logo) - - 18.5" threshing machine cylinder tooth wrench and straightener. Good++. (R1-254)

0071. CHAMPION SILO / WESTERN SILO CO DES MOINES IOWA - - 12". Double socket variant. Good+. (R1-484)

0072. CHAMPION SILO / WESTERN SILO CO DES MOINES IOWA - - 12". Single socket variation. Good+. (R1-484)

0073. TWIN CITY TANK & SILO CO - 5/8 / MINNEAPOLIS MINN - 1/2 - - 9.75". Small markings variant. Good+. (R1-461)

0074. Lot of Two:
(1.) APPLETON MFG. CO. - BATAVIA ILL. USA / C620 - - 10". Good++. (R1-21)
(2.) FD125 (orphan) - - 11.75" thick, heavy soe. Pitting. (not listed, no info found)

0075. S702 - FOR WATER PUMP NUTS ONLY (Caterpillar) / MADE IN USA - - 10.75". Good++. (R1-86)

0076. Lot of Two: Buggy Whip Holders
(1.) Unmarked - -7". Excellent with green paint.
(2.) PARRY (Parry Mfg. Co. - Indianapolis, Indiana) - - 7" buggy whip holder and wrench. Good++. (R1-372)

PiCs Lots 67 thru 76

0077. 25HA 1-1/2 - G & H PRODUCTS CORP. - 25HA 2 / 25HA 2 - KENOSHA WISCONSIN 0 25HA 1-1/2 - - 13.5" aluminum double open end dairy equipment wrench. Some dings. (not in Rathbone)

0078. Lot of Five: De Laval Separator Co. Wrenches (R1-141)
(1.) DEL. S. CO. NEW YORK USA (Delaval) / 1199 - - 6". Good+, not cleaned. (R1-141)
(2.) THE DE LAVAL SEPARATOR CO - NEW YORK USA - - 7.5". Good+.
(3.) 4126 DE LAVAL - - 7.75". Good++.
(4.) 15893 (De Laval) - - 8.5". open end variation. Good+, one of the four spanner pegs is broken.
(5.) 15893 (De Laval) - - 8.5". box end variation. Poor.

0079. 4 - SHARPLES SEPARATOR CO / TUBULAR - - 7.5" face spanner by hook spanner. Excellent. (R1-422)

0080. SHARPLES SEPARATOR CO / TUBULAR - - 5.75" single open end. Excellent. (R1-422)

0081. MONTGOMERY WARD - - 8" cream separator wrench with double open ends, spanner, and screwdriver tab. Excellent. (R1-336)

0082. IOWA CREAM SEPARATOR (Waterloo, Iowa) / BIG A LINE logo - - 7.25". Double open end S-wrench. Good+. (R1-259)

0083. Lot of Four: Cream Separator Type Wrenches
(1.) 15893 (De Laval) - - 8.5". box end variation. Poor. (R1-141)
(2.) 907 (orphan) - - 6.25"
(3.) 9406 (De Laval?) - - 5.75" (looks like De Laval in R1-141)
(4.) 17322 (Domo Cream Separators, made by A. B. Salenius Co. - Sweden) - - 6.75". Excellent. (R1-147)

0084. Lot of Eight: Cream Separator Type Wrenches. Including a Melotte (R1-325)

PiCs Lots 77 thru 84

0085. 20128X (orphan) - - 18.75" ratchet wrench. I have seen this wrench before but never with the original finish and stenciled part number. Anybody have a parts lists that shows this number? Good++. (not listed, no info found)

0086. Unmarked (Moline Plow No. RD2108) - - 22" plow wrench. Excellent with yellow paint. (parts list pic R1-333. R3-157)

0087. Unmarked (orphan, possibility IHC) - - 18.5". Excellent, original paint? (not listed, no info found)

0088. Unmarked (orphan, possibility IHC) - - 15.5" hex socket with steel sliding handle. Good+. (not listed, no info found)

0089. H502 (orphan) - - 18.25" cast socket with steel handle. Good++ with original paint?

0090. Unmarked V4194 (Moline Plow Co) - - 19.25". Good++, some edge damage, painted. (parts list pic R1-333. R3-157)

0091. Unmarked - - 18.5". Similar to the Dearborn wrenches shown in Dearborn Motor Corp. (Dearborn, Mich.) part lists for their Model 10-14 plows for Ford Tractors. Excellent, original paint. (not listed)

0092. Unmarked - - 20.25". Similar to the Dearborn wrenches shown in Dearborn Motor Corp. (Dearborn, Mich.) part lists for their Model 10-14 plows for Ford Tractors. Excellent, traces of original paint. (not listed)

0093. Unmarked (orphan, possibility IHC)- - 15.5". Painted, handle weld repair that looks like it may have been done at the factory. (not listed, no info found).

PiCs Lots 85 thru 93

0094. Lot of Two: Pig Snouters
(1.) DR. MILLER PIG SNOUTER / PAT SEPT 20 98 - - 10.5". Patented was granted to Samuel H. Miller of Nashville, Tenn. Excellent with an extra blade and most of the original finish.  PAT
(2.) Unmarked - - 10.25" pig snouter with two extra blades. Good+.

0095. Lot of Four: Three Hog Ringer Pliers and a Leather Punch
(1.) PAT'D SEP 8 74 - - 7.25" hog wringer with two ring holding groves. Patented by William D. Brown of Leroy, IL. Good++.  PAT
(2.) Unmarked - - 6.75" hog ringer. Good++..
(3.) PATD APR 21, 1`880 - - 7.5" hog ringer with double-jaws to fit two sizes of hog rings. Patented by John Heesen of Tecumseh, Mich. One handle end is broken off.  PAT
(4.) Unmarked - - 9" leather punch with an oval shaped cutter. Good+.

0096. Lot of Five:
(1.) LOVE MFG. CO. / ROCKFORD ILLS / PAT JULY 6, 1897 - - 12.25" tong type tool made especially for gripping windmill pump rods. Patent granted to Martin M. Billmire of Ashton, IL. These work great for gripping any round stock. Good+.  PAT
(2.) PEXTO (Peck, Stow & Wilcox) No. 2A - - 13" stove pipe snips and crimper. Good++.
(3.) Whitney Metal Tool Co. - Rockford, ILL. / PAT 22242226 - a 141 - - 8.5" sheet metal notcher. Patented by John Jenson of Rockford, IL. Good++.  PAT
(4.) Unmarked - - 12". This tool which has been a frequent visitor to the What's It's table at tool shows has been identified as a "Breakback Wrench" from a listing in a Dayton-Symons-Superior Catalog for concrete tools, etc. (catalog No. A30, list price $325.08 each!). Good+ with some jaw and edge damage, original finish.
(5.) JOHNSON - NEWARK, N.J (weak markings) - -8.65" revolving head leather punch. Several missing or damaged punches.

0097. Unmarked - - 7.25" odd little cast combination tool with a hammer, nail claw, staple puller?, and a couple unknown functions. Good++. (no patent or info found)

0098. Lot of Two: BUFFUM TOOL CO - LOUISIANA, MO / NO. 572448 - TRADEMARK (with a Swastika logo) - - 4.75" gate or barn door latches. Both have some pitting, one is missing the safety latch.

0099. Lot of Eight: Misc. tools
(1.) Unmarked - - 7.5" hand vise with wooden handle. Has a drilled hang hole and a crack in handle.
(2.) IROQUOIS (poor markings) - - 12.75" box or crate combination hammer, hatchet, pry bar tool with wood slab handles. Fair.
(3.) CHAS. R. COFFEY - 1948 - BREWSTER, KANSAS - - 11.25" promotional crow bar. Good+.
(4.) PATENTED APRIL 1914 - MADE IN USA - - 9.25" box or crate combination hammer, nail puller and pry bar tool. Good+.
(5.) 2 - CHAMPION - - 4.25" blacksmith's Flatter Tool.
(6.) Unmarked - - 6.5" cast barn door holder.
(7.) Unmarked - - 6.5" ice chipper with heavy cast handle. Good++.
(8.) Unmarked - - 7.5" casket wrench.

PiCs Lots 94 thru 99

0100. Unmarked - - 12" wooden handled quick and screw adjust nut wrench made by the Cincinnati Tool Co. Rare adjustable wrench, first we have had to offer. Good+ with a short, tight handle crack. (C94)

0101. Unmarked - -11.25" wooden handle quick adjust nut wrench and hammer with a locking set screw. rare wooden handle version. Reportedly manufactured by Bemis & Call. Good++, handle may be an older replacement.. (S436)

0102. Unmarked - - 10.75" all metal quick adjust nut wrench and hammer with a locking thumbscrew. Reportedly manufactured by Bemis & Call. Good++, painted. (see S436 for wooden handle version)

0103. GOODELL PRATT COMPANY - TOOL SMITHS - GREENFIELD, MASS - USA (most markings are not readable) - - 10" aluminum handled nut wrench with dual threaded shafts. Good++ with weak markings. (S394)

0104. CLUTCH WRENCH CO / WAUKESHA, WIS. - PAT JAN 7, 02 - - 7.75" all metal unique quick adjust nut wrench with a spring loaded lower jaw and set screw. Some pitting, no patina. (S487)  PAT

0105. CRONK (Cronk and Carrier - Elmira, NY) - - 6.5" sliding type adjustable nut wrench on one end and a hex box wrench on the opposite end. Patent issued to William Cronk of Montour Falls, NY on Oct. 22, 1912. Good+. (not listed)  PAT

0106. CRAFT 8 IN / THE CRAFTSMAN TOOL CO. CONNEAUT, O. - PAT NOV 1907 - - 8" size of the Craft roller jaw wrench, exposed gear variation. Patented Nov. 12, 1907 by George Heckling of Cleveland, Ohio. Couple cracks on shaft. (S663, 664)  PAT

0107. WADE WRENCH CO. - WHITE PIGEON, MICH. / PAT'D (with a "F" in a circle logo) - - 8.25" different pliers with split handle. Pat. Nov. 8, 1927 by William White and July 24, 1928 by Benjamin Wade both from White Pigeon, MI. Area on the handle end with pitting. (S257)  PAT and  PAT

0108. 8 in. - KIRKS SURE GRIP - PAT. ALL'D. / THE LAKEWOOD TOOL CO. - CLEVELAND USA, (etc.) - - 7.75" rare self adjust nut wrench with a ratcheting release mechanism. Some pitting, looks like a jaws release lever button is broken off. (not listed, patent not found)

0109. WIZARD - THE RICHARDS MFG CO AURORA, ILL - PATENTED MAY 21, 07 OTHER PATS PENDING - - 8" adjustable wrench that combines a double screw Crescent type adjustment on a ratcheting head. Patented by Joseph N. Noyer of Gould City, Washington. Excellent. (S156T)  PAT

0110. Marked only PAT'D JUNE 16, 1896 - - 7" Quick adjust nut wrench attachment for a brace Patent was issued to Henry Coolidge of East Jaffrey, NH. Good+, weak markings. (not in Schulz, C132)  PAT

0111. COMO WRENCH CO. - CHICAGO U.S.A. / DROP FORGED - - 10" unique screw adjust pipe wrench consisting of only three parts with a slotted threaded upper jaw that fits over the wrench handle. Patented by Joseph Anthony Schlehr of Chicago on Oct. 14, 1913. Good++. (S589)  PAT

0112. CRONK (Cronk and Carrier - Elmira, NY) - - 8.5" sliding type adjustable alligator wrench with single hex box wrench on the opposite end. Patent issued to William Cronk of Montour Falls, NY on Oct. 22, 1912. Good++. (S29)  PAT

0113. Marked only ELIZABETHPORT, NJ - - 12" whmw with a reinforcing bar on top of the shaft near the upper jaws. Several companies manufactured this wrench, the only one in Elizabethport, NY was Union Mfg. Co. Patented Dec 12, 1865 by John Parker Lindsay of New Haven, Conn. . Good+ with weak markings, tight handle crack and previous owner's stamped initials ("L. F.") (not in Schulz, see C321)  PAT

0114. CORBIN WRENCH CO. - EAST HAMPTON, MASS USA / PATENTED FEBRUARY 7-1911 14" - - 14" quick adjust pipe wrench. Rare, first one seen. Good++ except strap that goes around the upper jaws is pitted. (not in Schulz, see C09)

0115. BEMIS & CALL CO.- SPRINGFIELD, MASS. - PAT. AUG. 1866 - - 12.75" early wooden handle pipe wrench with short hex adjusting nut and replicable lower jaw insert. Amos Call's patent of 8-28-1866 applies. Good+ with some dings, stamped former owner's ID ("C. D. Page").  PAT

0116. QUICK ACTION WRENCH CO,. - UNIONTOWN, PA - PAT. JULY 20, 1920 - - 10" rack type quick adjust wrench. First one I have seen. Patent not on DATAMP and not listed in Schulz or Cope's books. Good+ with a few minor dings.

0117. THE WAKEFIELD WRENCH WORCESTER, MASS - NO. 5 / PAT. JUNE 30, 91 - OTHER PATS. PENDING - - 11" rack wrench that adjusts with a spring loaded top lever with serrated jaw inserts. Patented by John Wakefield of Worcester, Mass. Good+. (S727)  PAT

0118. CRONK (Cronk and Carrier - Elmira, NY) - - 8" sliding type adjustable nut wrench with three open ends on the opposite end. Patent issued to William Cronk of Montour Falls, NY on Oct. 22, 1912. Good++. (S451)  PAT

PiCs Lots 100 thru 118

0119. Lot of Two: Chain Wrenches
(1.) MADE BY REED MFG. CO. - ERIE, PA. USA. / NO. CW14 - 2 PIPE - PAT PEND - - 14" chain wrench. Excellent. like new.``
(2.) Unmarked - - 16.5" chain wrench. Excellent.

0120. = CRAFTSMAN = - 555714 /FORGED IN USA - - 15.75" chain wrench. Excellent. like new.

0121. WARNOCK / PAT JUNE 5 1900 - WORCESTER MASS - - 11.5" malleable strap wrench. Patented by Amos W. Warnock of Boston, Mass. Wrench and strap are in Excellent condition with large bold markings. (S139)  PAT

0122. CW12 - DIAMALLOY - DIAMOND TOOL AND HORSEHOE CO. (with diamond and horseshoe logo) - DULUTH, USA - PAT. NO. 3804817 - - 12.25" chain wrench. Patented Feb. 21, 1967 by John Swanstrom, Jr. and Swan Elmer Swanson of Duluth, Minn. Excellent, like new.  PAT

0123. NYE TOOL CO. - MCW-4 (with NYE in a diamond logo) - - 12" chain wrench. Excellent.

0124. CW12 - DIAMALLOY - DIAMOND TOOL AND HORSEHOE CO. (with diamond and horseshoe logo) - DULUTH, USA - PAT. NO. 3804817 - - 12.25" chain wrench. Patented Feb. 21, 1967 by John Swanstrom, Jr. and Swan Elmer Swanson of Duluth, Minn. Excellent, like new.  PAT

0125. WARNOCK / PAT JUNE 5 1900 - WORCESTER MASS - - 11.25" malleable strap wrench. Patented by Amos W. Warnock of Boston, Mass. Pitting. (S139)  PAT

PiCs Lots 119 thru 125

Double Ended Wrenches (lots 126 thru 158)

0126. DH18 - HANDYBOY - DULUTH (with DIAMALLOY logo) - - 8" combination slip joint pliers and Crescent type wrench. Excellent.

0127. DH16 - HANDYBOY - DULUTH (with DIAMALLOY logo) - - 6.5" combination slip joint pliers and Crescent type wrench. Wider jaw end variation. Good+ with engraved owner's name ("Dick Bolin")

0128. DH16 - HANDYBOY - DULUTH (with DIAMALLOY logo) - - 6.5" combination slip joint pliers and Crescent type wrench. Wider jaw end variation. Excellent.

0129. DH16 - HANDYBOY - DULUTH (with DIAMALLOY logo) - - 6.5" combination slip joint pliers and Crescent type wrench. Wider jaw end variation. Good++.

0130. DH16 - HANDYBOY - DULUTH (with DIAMALLOY logo) - - 6.5" combination slip joint pliers and Crescent type wrench. Wider jaw end variation. Excellent.

0131. Marked only "U.S:" - - 5.75" combination slip joint pliers and Crescent type wrench. Look older than others listed. Made for the US military? Good+.

0132. Unmarked - - 8" slip joint pliers with box a end wrench on end of each handle. Excellent, like new.

0133. Unmarked - - 11.5" Baxter's "S" Model double ended wrench. William Baxter of Newark, New Jersey first patent for his "S" Model wrench was issued Dec. 01, 1868. Pitted.  PAT

0134. W. BAXTER - PAT. DEC 1, 1868 - - 10" Baxter's "S" Model double ended wrench. Good+.  PAT

0135. Unmarked - - 8" Baxter's "S" Model double ended wrench. Good+.

0136. Unmarked - - 6" Baxter's "S" Model double ended wrench. Good+.

0137. W. BAXTER - PAT. REG. 1883 - - 6". Patent issued Jul. 17, 1883 was Baxter's improvement to his "S" adjustable wrench. Reinforcing ribs were added to the jaws. Modified jaw opening, minor dings.  PAT

0138. E. C. STEARNS & CO. - SYRACUSE, N.Y. U.S.A. - - 5.75" Baxter's "S" Model double ended wrench. Good++.

0139. Unmarked - - 4" Baxter's "S" Model double ended wrench. Some light pitting..

0140. 4-6 IN DROP FORGED STEEL MADE IN USA / MFD. BY CRESCENT TOOL CO. JAMESTOWN, NY - - 6" older style Crescent double ender. Good++.

0141. 6-8 IN. CRESCENT TOOL CO. JAMESTOWN, NY / 6-8 IN CRESCENT DROP FORGED STEEL - - 6" older style Crescent double ender. Marking variation. Good++.

0142. 6-8 IN. CRESTOLOY STEEL MADE IN USA / MFD. BY CRESCENT TOOL CO. - JAMESTOWN, NY - - 8" Crescent double ender. Good+.

0143. 6-8 IN. CRESCENT TOOL CO. JAMESTOWN, NY / 6-8 IN CRESCENT DROP FORGED STEEL - -8" older style Crescent double ender. Marking variation. Good++.

0144. 8-10 IN CRESCENT TOOL CO. JAMESTOWN, NY / 8-10 IN CRESCENT DROP FORGED STEEL - -10" older style Crescent double ender. Good+.

0145. 8-10 IN DROP FORGED STEEL MADE IN USA / MFD. BY CRESCENT TOOL CO. JAMESTOWN, NY - - 10" older style Crescent double ender, marking variation. Some dings.

0146. 10-12 IN DROP FORGED STEEL MADE IN USA / MFD. BY CRESCENT TOOL CO. JAMESTOWN, NY - - 12". Rarest size of the Crescent double enders, first size to be discontinued. Good++, large end jaw may be a replacement. (S470)

PiCs Lots 126 thru 146

0147. 10 - 12 - LAKESIDE - TOOL STEEL / LAKESIDE - FORGED - - 12" double ended Crescent type wrench (10 and 12 inch). Rare brand, Rare size. Good++.

0148. 6 - 8- LAKESIDE - TOOL STEEL / LAKESIDE - FORGED - - 8" double ended Crescent type wrench (6 and 8 inch). Rare brand..Good++.

0149. 8 - 10 - MERIT TOOL - TOOL STEEL / MERIT TOOL - FORGED - - 10" double ended Crescent type wrench (8 and 10 inch). Rare brand. Good+..

0150. 8 - 10 - TOOL STEEL / FORGED - - 10" double ended Crescent type wrench (8 and 10 inch). Excellent.

0151. "OUR OWN HARDWARE" - - 10" double ended Crescent type wrench (8 and 10 inch). Rare brand. Good+. (no photo)

0152. 6-8 IN. CRESCENT TOOL CO. JAMESTOWN, NY / 6-8 IN CRESCENT DROP FORGED STEEL - - 6" older style Crescent double ender. Marking variation. Edge damage.

0153. 4-6 IN CRESCENT - DROP FORGED STEEL / CRESCENT TOOL CO. JAMESTOWN, NY - - 6" older style Crescent double ender. Good+.

0154. 4 - 6 DIAMOND CALK HORSESHOE CO - DULUTH, MINN. with horseshoe logo / 4 - 6 - DAMALLOY logo - with horseshoe logo - - 6" double ended Crescent type wrench (4 and 6 inch). Rare size. Good+ except for cracked jaw..

0155. 6 in - 8 in - DIAMOND CALK HORSESHOE CO . - DULUTH, MINN. with horseshoe logo / 6 in - 8 in - DAMALLOY logo - - 6" double ended Crescent type wrench (6 and 8 inch). Good++.

0156. 8 in - 10 in DIAMOND TOOL AND HORSESHOE CO . - DULUTH, MINN. with horseshoe logo / 8 in - 10 in - DAMALLOY logo - - 10" double ended Crescent type wrench (8 and 10 inch). Good+.

0157. Unmarked - - 6" Baxter's "S" Model double ended wrench. Good++.

0158. Unmarked - - 6" Baxter's "S" Model double ended wrench. Pitted..

0159. 707 - STA-TITE CORP. - LOCKMATIC - PAT. PEND - MADE IN U.S.A. / Reverse side has a GARILL SEEDS decal - - 7.75" advertising / promotional slip joint pliers with a handle latch that locks the jaws. Patent issued to Walter Sarvie of Alexandria, Minn. on 1-30-1951. Good++. decal is faded. (like S287)  PAT

0160. IOWA SAVINGS BANK - DIKE, IA / JAPAN - - 7.75" advertising / promotional slip joint pliers with a handle latch that locks the jaws. Same pliers as Lot 159 except no maker's name and made in Japan instead of USA. Excellent. (like S287)  PAT

0161. Lot of Two: Ratcheting Open End Wrenches
(1.) NO. 15 - SIMPLEX RATCHET - NICKEL MOLYBDENUM / PAT. JAN. 1, 1924 - APRIL 27, 1927 - OTHER PATENTS PENDING - SIMPLEX WRENCH CO. NY - FASTNUT LICENSE - REIILLY LICENSE - - 8". Jan 1. 1924 Patent was issued to Walter Herbert Cook of London, England. April 27, 1927 is not a patent issue date. Good++.  PAT
(2.) J. H. WILLIAMS & - BROOKLYN, NY USA / "RATCHO" WRENCH - 1127C - - PATD. USA - APR. 26, 10 - - 5.5". Patent was granted to George Amborn of New York, NY.  PAT

0162. Lot of Three: Ratcheting Open Ended Wrenches. Marked: RATCHET ACTION SPEED WRENCHE/ US PAT. 3762244 - USA. {patent was issued to James P. Evans of Oklahoma City, OK on Oct.2. 1973 and assigned to Specialty Tools, Inc. of Oklahoma City.  PAT
(1.) SW-1004 / 3/4 - 13/16 - - 9". Excellent.
(2.) SW-1002 / 1/2- 9/16 - - 6.25". Excellent.
(3.) SW-1001 / 3/8 - 7/16 - - 5". Good++.

0163. Lot of Five: Misc. Double Open Ended Wrenches
(1.) DEXTER - 1027 / 3/8 - 5/16 - - 5.25".
(2.) MERCEDES-BENZ - 9 - 10 / DOWIDAT DIN 895 - MADE IN GERMANY - - 4.5". Excellent, like new.
(3.) HKC (in a diamond logo) - JAPAN - #10 - #11 - - 5" odd specialty wrench? Excellent.
(4.) HKC (in a diamond logo) - JAPAN - #8 - #9 - - 5" odd specialty wrench? Excellent.
(5.) BONNEY - 1/4 - 5/16 / E810 - - 4". Excellent, like new.

PiCs Lots 147 thru 163

0164. No. 10WR - Vise-Grip Jr. (Petersen Mfg. Co. Inc. - Dewitt, Nebr.) - - 10" Vise-Grip in original box. Excellent tool and box. New Old Stock.

0165. No. 10WR - Vise-Grip Jr. (Petersen Mfg. Co. Inc. - Dewitt, Nebr.) - - 10" Vise-Grip in original box. Excellent tool and box. New Old Stock.

0166. No. 10WR - Vise-Grip Jr. (Petersen Mfg. Co. Inc. - Dewitt, Nebr.) - - 10" Vise-Grip in original box. Excellent tool and box. New Old Stock.

0167. No. 10WR - Vise-Grip Jr. (Petersen Mfg. Co. Inc. - Dewitt, Nebr.) - - 10" Vise-Grip in older, orange original box/ Box states "with New Easy Release!" . Excellent box. tool may have been used.

0168. No. 5WR - Vise-Grip Jr. (Petersen Mfg. Co. Inc. - Dewitt, Nebr.) - - 5" Vise-Grip in original box. Excellent tool and box. New Old Stock.

0169. No. 5WR - Vise-Grip Jr. (Petersen Mfg. Co. Inc. - Dewitt, Nebr.) - - 5" Vise-Grip in original box. Excellent tool and box. New Old Stock.

0170. VISE-GRIP - DEWITT, NEB ("W" in a diamond logo) - PAT'D. APR. 8, 24 - - 9" second model Vise-Grip. First model to have a locking lever. Patent was issued to William Petersen of DeWitt, Nebraska. Good+ with some edge dings. (S262)  PAT.

0171. 6LN Long Nose Vise-Grip - - 6". Excellent, New Old Stock still in original box marked "Petersen Mfg. Co., Inc. - Dewitt, Neb, copyright 1982/1987 and Patent 4,5431,312". Box shows some wear.  PAT

0172. 9LN Long Nose Vise-Grip - - 9". Excellent, New Old Stock still in original box marked "New Tool" - Petersen Mfg. Co., Inc. - Dewitt, Neb, copyright 1982 and Patent 4,5431,312" . Box shows some wear.  PAT

0173. VISE-GRIP GIFT SET - - Boxed set of a 10WR and a 5WR Vise-Grips (Petersen Mfg. Co., Inc. - Dewitt, Neb,). Excellent, New Old Stock still in original package.

0174. VISE-GRIP GIFT SET - - Boxed set of a 10WR and a 5WR Vise-Grips (Petersen Mfg. Co., Inc. - Dewitt, Neb,). Excellent, New Old Stock still in original package. Package has tears and rips.

0175. DIAMOND (in a diamond logo) - - 10" Crescent type wrench. Excellent, New Old Stock still in original package.

0176. 10" STANLEY / 85-610 - PAT 4472986 - CHINA - - 10" Crescent type with a lever that tightens and locks the jaws and another that releases the jaws. Patented by Robert G. Gottlieb of Overland Park, Kansas. Excellent, New Old Stock still in original package.  PAT

0177. RED VIKING (Bloomfield, Ind.) - - 11" combination fencing hatchet tool. New Old Stock still in the original package. Advertising on package proclaims that it is "11 tools in 1" consisting of a hammer, hatchet, pliers, nail puller, screw driver, wire cutter, staple puller, pipe wrench, tack pry, wire stretcher, and the very essential bottle opener. Tool is in Excellent, like new condition, package is coming apart but all the printing is readable including a sketch of the tool showing the location of all eleven uses.

PiCs Lots 164 thru 177

0178. Marked only "1974" (orphan) - - 11" cast wrench with three box openings and a face spanner. May be a hub cap wrench? Good++ with black paint. (not listed, no info found)

0179. Lot of Two: Early Rambler Automotive Wrenches
(1.) RAMBLER / NO. 5 - - 11.5" doe with hubcap spanner. Good+, painted.
(2.) RAMBLER / NO. 2 - - 5.5" doe. Pitting, painted.

0180. Lot of Two: Early Cadillac Tool Kit Wrenches
(1.) CADILLAC (script) / 3496 - - 9.25". Drilled hang hole, looks like the open end is a modified box end..
(2.) CADILLAC (block lettering) - - 6". Excellent.

0181. MITCHELL (script) - - 7" double open end wrench.

0182. Lot of Six: Early Nash Double Open Ended Wrenches. Two No. 1's, one No. 2 and three No. 3's (one marked NASH only without No.3).

0183. GOODYEAR - - 9.25" tire tool. Good+.

0184. BILLINGS B - PIERCE (with arrow logo) - - 5" adjustable nut wrench. Good++. - -

0185. Lot of Four: Flat steel double Open Ended Automotive Wrenches (all good++ or better)
(1.) MAXWELL - 4 - - 9.5"
(2.) MAXWELL - 3 - - 7.75"
(3.) Marked only "5" (Dodge Bros.) - - 9.75"
(4.) Marked only "2" (Dodge Bros.) - - 6.75".

0186. T11 - HASSLER (with two spoked wheel logos) (same markings both sides)- - 10" double hex box ends. Hassler's main products were Ford after market shock absorbers. Good+.

0187. WILLIAMS - MADE IN USA 633 MACK (script) - -8.5" double open end wrench. Good+.

0188. Lot of Two:
(1.) TIRE CARRIER WRENCH / 678225 (with backward "S" logo) (Studebaker Truck wrench) - - 9" Has some dings.
(2.) HINCKLEY-MYERS - MADE IN USA / J-1039-1 - CL. COVER SPRING ASSY. TOOL - BUICK '39 SERIES 40 - -8.5" 1939 Buick specialty tool. Good++.

0189. Lot of Six:
(1.) Unmarked - - 3" brass combination gas light, etc.. wrench.
(2.) CAT #1522 - - 3.5" double open end wrench.
(3.) PREST-O-LIGHT (script) - MADE IN USA - - 3" GAS LIGHT WRENCH.
(4.) Unmarked - -5" double open end wrench with a feeler gauge.
(5.) SPARK PLUG - - 3.5" ignition wrench with feeler gauge.
(6.) SEARCHLIGHT - - 3".

0190. D-1 FERGUSON - - 10" - - Automotive door and side panel body repair spoon. Good++.

0191. 4-IN-ONE RIM - 5104 - - 18" speed type revolving head lug wrench. Patents were issued to John B. Drahonovsky, Frank E. Dion and Herbert E. Tautz all of Milwaukee, Wisc. on. Dec. 4, 1923 and Feb. 2, 1926. Poor, revolving handle and knob are missing.  PAT  and  PAT

0192. 6216 BLACKHAWK 1/2" - - 21" brace type speed wrench with two sockets, one to turn the nut and the other to hold the bolt. Used for flanged differential covers, oil pans, etc. Good++..

PiCs Lots 178 thru 192

0193. Unmarked - - 13.5" crank type valve grinder with brass frame and wood crank knob. Good++.

0194. Lot of Two: Valve Grinders
(1.) MILLERS FALL CO. - NO. 238 - - 12.5" crank type valve grinder. Iron with wooden crank knob. Excellent.
(2.) TEMPCO - - 10" valve grinder attachment for a drill with cast iron body and wood handle. Excellent.

0195. Lot of Two: Valve Grinders
(1.) ALBERTSON & CO - SIOUX CITY, IA - SIOUX (inside logo) - PATENTED - - 11" iron with wooden knobs crank type valve grinder. Good++.
(2.) Unmarked - - 7.5" iron with wooden handle and knob. Excellent.

0196. Lot of Three: Valve Spring Compressors
(1.) PAT. 2-10-20 - 7-10-23 - MADE IN USA - -10.75".
(2.) MORRIS BULL DOG - -10".
(3.) Unmarked - - 7".

0197. Marked only "3V-1" - - 7.5" iron valve grinder with a handle that attaches to the end of the valve stem to rotate the valve. Excellent.

0198. Lot of Five: Valve Grinders, Two Archimedes screw types, two suction cup types (one marked NO. 501 - K-D TOOL CO. - LANCASTER, PA.) and a simple wooden handle type.

0199. Lot of Valve Grinders and Attachments: Three speed wrench type valve grinders (one marked "VG-11 - PAT. PEND. and a Herbrand logo), five grinders with adjustable heads for use with drill braces (one marked SUPREME VALVE GRINDER), one odd cast two prong bit, and four extra adapters.

PiCs Lots 193 thru 199

Implement Tool Boxes, Etc. (lots 200 thru 205)

0200. Lot of Three: Implement Tool Boxes
(1.) Unmarked - - 8.75" cast tool box.
(2.) Marked only "L328" - - 10.5" cast tool box with oval and round cutouts. Broken piece missing on one end.
(3.) JOHN DEERE (Deere Part No. 10432) - - 9.5" tin tool box. Some rusted out spots on bottom. (Tool Box No.23 on Dill's list)

0201. AVERY 20 LB - - 6" cast scale test weight.

0202. GILPIN / 132 (John Deere) - - 13.5" Rare cast tool box with cutout letters from John Deere's Gilpin Sulky Plow. Painted green. Has a couple minor no show (from the front) casting flaws and a broken piece is missing on the "N". (Tool Box No.1 on Dill's list)

0203. AVERY 191 - - 10.5" cast tool box. Some pitting.

0204. 156B IHC - IHC logo (International Harvester) - - 12" cast tool box with cutout letters and a high relief ear of corn on each end. Neat tool box, nicely pained. Excellent.

0205. Lot of Four: Implement Tool Boxes. Will be sold choice item.
(1.) Marked only "300" - - 15.75" cast with oval and round cutouts, has an oil can holder section.
(2.) Marked only "300" - - 15.75" cast with oval and round cutouts, has an oil can holder section. Green paint.
(3.) Unmarked - - 13" cast with oval and round cutouts.
(4.) HAYES / HAYES - - 11.5" tin. Some light pitting.

PiCs Lots 200 thru 205

0206. B. F. AVERY & SONS - LOU. KY / E1014 - - 18". As found, not cleaned. (R1-27)

0207. NEWELL SANDERS PLOW CO - A260 / "P" in a square logo (later IHC) - - 18.5". Area of edge damage. (R1-351)

0208. W402 (Emerson-Brantingham, Rockford, ILL. Later Case T. M. Co.) - - 17". Good+. (R1-163)

0209. LA CROSSE PLOW CO K29 / (ruler markings) - - 14.25". Good+ with some edge dings. (R1-289)

0210. Marked only "1" (Melotte Cream Separator bowl wrench) - - 17.75" . I've seen these marked with letters A thru H but this is the first one I have seen marked with a number . Rusty, as found, not cleaned. (see R2-197, R3-151)

0211. UNADILLA SILO CO - - 10". Open end by double box end. Some light pitting.. (R1-462)

0212. Lot of Three: International Harvester Wrenches.
(1.) GA246 (IHC) - - 9.5" piston socket wrench. Embossed IHC logo variant (exceptionally high relief). Good++. (R1-253)
(2.) M141 / (IHC logo) - - 9". All markings indented. Good++. (R1-254)
(3.) G-3173 / I. H. CO. and IHC logo - - 4". Note: Not in photo.

0213. 6045 (Geiser Mfg Co - Waynesboro, PA) - - 7" heavy double square socket with a flat extension on the other end.. 6045 is listed in Geiser Parts Books. First one I have seen. (Listed in Rathbone's Third Supplement, no photo in hard cover book. Good++.

0214. Lot of five: Interesting Farm Wrenches
(1.) 53D230 (orphan) - - 10". Good++. (not listed, no info found)
(2.) BUDA (later purchased by Allis Chalmers) / CE542 - - 10.25" heavy duty double face spanner. Buda engines were used in numerous early trucks and tractors. Good++
(3.) H3B249 (orphan) - - 7" cast double face spanner. Good++. (not listed, no info found)
(4.) 11 (orphan) - - 13". Neat looking six opening cast wrench. Some light pitting. (not listed, no info found).
(5.) 30 (orphan) - - 8" thick cast wrench. Overall pitting. (not listed, no info found)

PiCs Lots 206 thru 214

Four Inch and Key Chain Crescent Type Wrenches (lots 215 thru 295)

Large selection of 4" Crescent types Including several rare brands

0215. TIGER - TOOL STEEL MADE IN USA / TIGER-= FORGED - - 4" Crescent type. Tiger was a Gambles brand.

0216. TIGER - DROP FORGED TOOL STEEL / TIGER - MADE IN USA - - 4" Crescent type. Tiger was a Gambles brand.

0217. 4 INCH GRANCO IND USA (Granco Industries - Grandview, MO) / 100MM FORGED USA 11650 - - 4" Crescent type. Granco Industries manufactures specialty tools for the defense and aerospace industry. Excellent, like new.

0218. 704 AUTO? - LOS ANGELES - FORGED ALLOY STEEL / MADE IN USA - - 4" Crescent type.

0219. ARMSTRONG (with their arm and hammer logo) / 4in MADE IN USA - - 4" Crescent type.

0220. AW-4 - NAPA - USA / FORGED ALLOY STEEL - - 4" Crescent type. Excellent, like new.

0221. 3585A INDESTRO SUPER / FORGED ALLOY STEEL P - - 4" Crescent type. Excellent, like new.

0222. 3585 INDESTRO SUPER USA / FORGED ALLOY STEEL - - 4" Crescent type.

0223. 2085A DURO - INDESTRO / FORGED ALLOY STEEL P - - 4" Crescent type.

0224. 4in BET'R-GRIP - MADE IN USA / FORGED VANADIUM STEEL - 5/16 in - - 4" Crescent type with a 5/16" box end wrench on end of handle.

0225. No, 77-4" IREGA (in a shield logo) FULLY DROP FORGED STEEL - SPAIN / No, 77-4" IREGA (in a shield logo) ALLOY DROP FORGED - - 4" Crescent type. Excellent.

0226. 4in UTICA (in a three diamond logo) ALLOY STEEL / UTICA (in a three diamond logo) MADE IN USA - - 4" Crescent type. Wide handle variation.

0227. 91-4 UTICA TOOLS USA / UTICA ALLOY STEEL - - 4" Crescent type.

0228. BLACKHAWK USA / AW-1004-1 USA - - 4" Crescent type.

0229. 44 - XCELITE - ALLOY / ORCHARD-PARK - NY - - 4" Crescent type.

0230. 44 - XCELITE - ALLOY / ORCHARD PARK - NY - - 4" Crescent type. Excellent. like new.

0231. BET'R-GRIP - J. P. DANIELSON - JAMESTOWN, NY USA / FORGED VANADIUM STEEL - - 4" Crescent type.

0232. 904 RIDGID FORGED STEEL / 4" RIDGE TOOL CO. - ELYRIA, OHIO - MADE IN USA - - 4" Crescent type.

0233. 904 RIDGID FORGED STEEL / 4" RIDGE TOOL CO. - ELYRIA, OHIO - MADE IN USA - - 4" Crescent type.

0234. 4in S-K WAYNE - DEFIANCE OHIO / FORGED ALLOY IN USA - - 4" Crescent type.

0235. 4" S-K TOOLS / FORGED ALLOY IN USA - - 4" Crescent type.

0236. Marked only "4" and GERMANY - - 4" Crescent type with four geometric shaped cutouts in the handle.

0237. 4in BET'R GRIP - MADE IN USA / FORGED VANADIUM STEEL - - 4" Crescent type.

0238. 4in CRESCENT TOOL CO. / JAMESTOWN, N.Y. - - 4" early Crescent.

0239. HEAVY DUTY / CHROME VANADIUM - - 4" Crescent type with rectangular hang hole. Excellent, like new.

0240. 506-4 KLEIN TOOLS INC. / USA - - 4" Crescent type. Excellent, like new.

0241. Lot of Five: 4" Crescent Type Wrenches (all marked GERMANY, several variations)

0242. Lot of Five: J. H. Williams 4" Crescent Type Wrenches (four different marking variations)

0243. Lot of Seven: Misc. 4" Crescent type wrenches (mostly imports).
(1.) 4" DROP FORGED JAW / QUALITY SPAIN
(2.) Marked only "4"
(3.) 4 INCH
(4.) HONG KONG
(5.) L. K. (in an oval logo) MADE IN HONG KONG
(6.) FISH WRENCH / JAPAN
(7.) SAM (in a diamond logo) MADE IN HONG KONG

PiCs Lots 215 thru 243

0244. BARCALO BUFFALO / 4" DROP FORRGED STEEL - - 4" Crescent type.

0245. FORGED - BARCALO / 4" BUFFALO USA - - 4" Crescent type with two indented panels on each side and "top" shaped hang hole.

0246. ARMSTRONG 34-504 / MADE IN USA - - 4" Crescent type WITH BLACK FINISH. Excellent, like new.

0247. FAIRMOUNT / 4T MADE IN USA - - 4" Crescent type.

0248. THORSEN 56724 / EURO-STYLE WIDE GRIP - - 4" Crescent type.

0249. QUEEN CITY / BERGMAN O' BUFFALO - - 4" Crescent type. Curved handle variation.

0250. HARLEY DAVIDSON - - 4" Crescent type.

0251. 4R XCELITE ALLOY / ORCHARD PARK NY - - 4" Crescent type.

0252. XCELITE 44CG - - 4" Crescent type with plastic handle cover.

0253. HERBRAND NO. 21-4 - - 4" Crescent type.

0254. MAC AJ-4C / MAC TOOLS MADE IN USA - - 4" Crescent type.

0255. AW-4 NAPA USA / FORGED ALLOY STEEL - - 4" Crescent type.

0256. BONNEY / BW4 MADE IN USA - - 4" Crescent type.

0257. LACO DROP FORGED / MADE IN USA - - 4" Crescent type with Barcalo style "top shaped" hang hole.

0258. GREAT NECK / DROP FORGED - KOREA - - 4" Crescent type.

0259. BLUE-POINT FORGED ALLOY STEEL USA (with double ended arrow logo) / SNAP-ON TOOLS CORP. - KENOSHA, WISCONSIN - - 4" Crescent type.

0260. WARDS MASTER QUALITY / MOLYBDENUM ALLOY - - 4" Crescent type. Embossed (raised) markings variation.

0261. B4-4701 POWR-KRAFT / FORGED ALLOY STEEL USA - - 4" Crescent type.

0262. 90-4 UTICA (in a three diamond logo) TOOLS / FORGED ALLOY STEEL - - 4" Crescent type.

0263. GS (in a hexagon logo) DROP-FORGED TOOL-STEEL / GS (in a hexagon logo) MADE IN USA - - 4" Crescent type.

0264. TRUECRAFT 204 / CR VANADIUM TRUECRAFT - JAPAN - - 4" Crescent type.

0265. WIZARD H2400 / FORGED ALLOY STEEL MADE IN USA - - 4" Crescent type.

0266. WIZARD HR2400 / FORGED ALLOY STEEL MADE IN USA - - 4" Crescent type.

0267. K & B CO. - NEW HAVEN, CT. USA (Kilborn & Bishop Co) / 4IN ADJUSTABLE 22-1/2° - - 4" Crescent type with square hang hole for Prest-O-Lite automobile gas lights.

0268. STANLEY 85-336 / STANLEY 85-336 USA - - 4" Crescent type.

0269. KRAEUTER - DEFIANCE, OHIO / FORGED ALLOY IN USA - - 4" Crescent type.

0270. MM91-4 MASTER MECHANIC (True Value Hardware brand) / FORGED ALLOY STEEL USA - - 4" Crescent type.

0271. 4" SCHOLLER - - 4" Crescent type.

0272. 4in ANGLE ADJUSTABLE - PEXTO (in an oval logo) / PECK STOW &. WILCOX CO. USA - - 4" Crescent type.

0273. K-D FORGED USA 68604 / ALLOY STEEL - - 4" Crescent type.

0274. EASCO/K-D 68604 / FORGED ALLOY STEEL USA - - 4" Crescent type.

0275. P & C in a shield logo (Peterson and Carlborg) 1704-SL FORGED ALLOY STEEL / CLIK-STOP - PAT. MADE IN USA - - 4" Crescent type with black finish. P & C was acquired by Plomb in 1941.

0276. P & C in a shield logo (Peterson and Carlborg) 1704-L - MFD. USA / CLIK-STOP - PAT.PEND. FORGED ALLOY STEEL - - 4" Crescent type with plated finish.

0277. P & C in a shield logo (Peterson and Carlborg) 1704-L / CLIK-STOP - PAT.PEND. FORGED ALLOY STEEL - - 4" Crescent type with plated finish.

0278. 704-L PROTO FORGED ALLOY STEEL / CLIK-STOP PATENTED MFD USA - - 4" Crescent type with plated finish.

0279. 4204 PENENS CORP. - CHICAGO / FORGED ALLOY STEEL - - 4" Crescent type.

0280. 4204-S FLEET - - 4" Crescent type.

0281. 4004-S FLEET FORGED ALLOY STEEL / PENENS CORP. - CHICAGO - - 4" Crescent type.

0282. LAKESIDE (Montgomery Ward brand) DROP FORGED TOOL STEEL / LAKESIDE MADE IN USA - - 4" Crescent type.

0283. 7704 VACO - CHICAGO USA - - 4" Crescent type.

0284. 77-4 BILLINGS VITALLOY / HARTFORD, CONN. (with a "B in a triangle logo) MADE IN USA - - 4" Crescent type.

PiCs Lots 244 thru 284

0285. Lot of Four: Crescent Tool Co. 4" Crescent type Adjustable Wrenches (all with different marking)

0286. Lot of Six: Crescent Tool Co. 4" Crescent type Adjustable Wrenches (several variations)

0287. Lot of Five; Four Craftsman and one Crestoloy 4" Crescent type Adjustable Wrenches (several variations)

0288. Lot of Seven: Crescent Tool Co. 4" Crescent type Adjustable Wrenches (several variations, couple have some pitting.)

0289. Lot of Four: Proto and Proto Professional 4" Crescent type Adjustable Wrenches (all different)

0290. Lot of Six: Diamond, Diamond Calk Horseshoe Co. and Diamond Tool & Horseshoe Co. 4" Crescent type Adjustable Wrenches (several variations, one has pitting)

0291. Lot of Four; Craftsman 4" Crescent type Adjustable Wrenches (several variations)

0292. Lot of Five: Crescent Tool Co. 4" Crescent type Adjustable Wrenches (all different, one early type)

PiCs Lots 285 thru 292

0293. Lot of Five: Diamond Calk Horseshoe Co. 4" Crescent type Adjustable Wrenches

0294. Lot of Eleven: Crescent type Adjustable Wrench Key Chains. One CRAFTSMAN / CHINA, the rest are Hong Kong, Spain, Taiwan, etc. All around 2.75".

0295. Lot of Five: Diamond Calk Horseshoe Co. 4" Crescent type Adjustable Wrenches

PiCs Lots 293 thru 295

0296. Lot of Two:
(1.) B & G Plow Co / Canton O (Bucher & Gibbs Plow Co.) - - 9.75". Good+, minor edge damage. (R1-31)
(2.) GALE 21 (Gale Mfg. Co. - Albion, Mich.) - - 8.5". Good+. (R1-193)

0297. Lot of Two: Farm Wrenches
(1.) Unmarked (like Whitman & Barnes Cultivator Wrench - - 7.25" oddball with hammer head. Good+. (R1-487)
(2.) 272 (Superior Drill Co. Rathbone also shows the 272 wrench under A, C, Evans and Kingman Plow Co) - - 9.5". Variation with the tab extension on the edge. Good++. (R1-284, R1-446, R2-11, R2-92,)

0298. Lot of Two:
(1.) J11316 (John Deere Corn Picker Wrench) - - 8.5" flat steel. Scarce John Deer Wrench Good++. (D358, no photo in Rathbone)
(2.) B & H / 1372 (Bickford & Huffman - Macedon, NY) - - 5.5". Good++. (R1-32)

0299. Lot of Four:
(1.) 1064? (orphan) - - 6" garden cultivator type with small hammer head. (weak markings, not all readable.
(2.) ECONOMY CHIEF (Cream Separator) - - 6". Double open end S-wrench. Light pitting. (R1-157)
(3.) REMINGTON - - 6". Three openings with hang hole variation, Good++. (R1-393)
(4.) 635G - - 6" small buggy wrench type similar to known Pennsylvania Lawn Mower wrenches. Good++.

0300. Lot of Five: Orphans and Oddballs
(1.) Unmarked (like the South Bend Chilled Plow No. 88 wrench) - - 6.25" doe-s with one ridged side and the other flat, (see R2-267)
(2.) Unmarked (orphan) - - 5.25". (not listed, no info found)
(3.) T6128 with a double "X" logo (orphan) - - 4" sq box with peg. (not listed, no info found)
(4.) 784 (orphan) - - 5.75" oddball y-shaped wrench. Excellent. (not listed, no info found)
(5.) Marked only "4" (orphan) - - 5" cast oddball. Good++. (not listed, no info found)

0301. Lot of Two:
(1.) C111 (Roderick Lean - Mansfield, Ohio) - - 8". Good+, painted.
(2.) 17A (Gale) - - 9". Light pitting. (R1-193)

0302. Lot of Two:
(1.) Unmarked (IHC No. 260) - - 7". Good+.
(2.) H63 (Oliver, Ohio Rake) - - 6.75". Jaw corner crack. (R361, R359)

0303. DEANE / OF HOLYOKE (Holyoke, Mass.) - - 7.75". Casting stress crack.(R1-129)

0304. BAKER ICE MACHINE CO - - 6". Good+.

PiCs Lots 296 thru 304

Motorcycle and Bicycle Type Wrenches (lots 305 thru 321)

0305. INDIAN MOTOCYCLES / HENDEE MFG. CO. - 6" double hex box end wrench. Good++. (S125T)

0306. INDIAN MOTOCYCLES - - 6" flat steel double box end. Good+.

0307. INDIAN MOTOCYCLES - - 6" flat steel open end by alligator jaws. Some jaw edge damage.

0308. BSA / 15-832 (Birmingham Small Arms) - - 5" cast steel double box end for BSA motorcycles?. Good++.

0309. Lot of Four: Triumph Motorcycle Tool Kit Wrenches
(1.) TRIUMPH - - 5.25" double box end. Bent?
(2.) TRIUMPH / NA55 - - 5.75" doe. Excellent.
(3.) TRIUMPH / A16 - - 6.5" doe. Excellent.
(4.) TRIUMPH - - 6.5" flat steel double box end.

0310. Lot of Two:
(1.) DUNLOP - - 6.75" bicycle or motorcycle tire tool. Good++.
(2.) Unmarked - - 6.75" flat steel early Harley Davidson Motorcycle tool kit wrench NO. 94503-15. Pitted.

0311. Lot of Six: Motorcycle Tool Kit Wrenches
(1.) YAMAHA 22 - 29 - - 6.75" double box end. Pitting.
(2.) YAMAHA 22 - 29 - - 6.75" double box end. Good++.
(3.) YAMAHA 19 - 22 - - 5.5" double box end. Good++.
(4.) YAMAHA 13 - 17 - - 5.75" forged doe. Good++.
(5.) YAMAHA 14 - 17 - - 5.75" forged doe. Good++.
(6.) KAWASAKI 24 / MOTCO-1 MADE IN JAPAN - - 6.5" single box end. Excellent.

0312. BARNES TOOL CO. - NEW HAVEN, CONN. / PAT'D 1884 - IMP'D 1892 - - 4.75" side adjust bicycle wench with screwdriver bit on end of handle shaft. I don't think I have seen this one before. Some damage to the end of handle sleeve, a few other dings. (not listed, patents not found)

0313. A. DUDLY MFG. CO. MENOMINEE, MICH. - PAT. MAY 29, 94 - - 3.75" X 1.375" bicycle spoke or nipple wrench. Good++, adjusting screw is missing. (S110)

0314. JUNIOR NO. 1 / FRANK MOSSBERG CO. - ATTLEBORO, MASS USA - - 3" center adjust pocket wrench with ruler markings on the shaft. Smallest Mossberg adjustable. Good with some weak markings, minor dings. (S873)

0315. Lot of Six: Bicycle and Pocket Wrenches All unmarked except No. 4 which is marked U. S. SEPARATOR (United States Cream Separator made by the Vermont Farm Machine Co. of Bellows Falls, Vermont, see R1-465), All around 5" long.

0316. Lot of Four: Unmarked Bicycle and Pocket Wrenches (2.75"" to 4" long)

0317. Lot of Six: Unmarked Bicycle and Pocket Wrenches (4" to 5.75" long)

0318. Lot of Three: Bicycle or Pocket Wrenches
(1.) MADE IN GERMANY - - 4".
(2.) MADE IN GERMANY - - 4.25".
(3.) MADE IN GERMANY - - 4.25" with square notched jaw.

PiCs Lots 305 thru 318

0319. Lot of Four: Billings & Spencer Screw Adjust Bike and Automobile Nut Wrenches. Will be sold choice wrench.
(1.) "A" - - 4.25". Good++.
(2.) "B" - - 4.75". Jaws sprung.
(3.) "D" - - 6". Excellent.
(4.) MADE FOR POPE MFG CO - BILLINGS & SPENCER - HARTFORD, CONN. (with the "B" in a diamond logo) / C. E. BILLINGS - PAT FEB. 18, 1879 - - 5" with one open side. Patented by Charles E. Billings of Hartford, Conn. Upper jaw has been modified and slightly sprung. (not listed)  PAT

0320. Lot of Five: British Made Bicycle and Automotive Wrenches. Will be sold choice wrench.
(1.) SHELLY - - 5.5" with one side open. Good+.
(2.) (BRITISH MADE) - - 6" with one side open.
(3.) RICHARDS BROS & SONS - SHEFFIELD ENGLAND - BRITISH NO. 553540 PATENT / TENT SHEFFIELD (with a tent logo) - - 4" Good+.
(4.) KING DICK - - 4". One side open, Good++.
(5.) King Dick (bull dog head logo) Trade Mark / ABINGDON - - 2.75" with one open side. Smallest example seen of a King Dick wrench. Good+ with minor jaw edge dings.

0321. Lot of Five: Bicycle / Pocket Wrenches
(1.) WAKEFIELD CYCLE WRENCH - - 5.25".
(2.) WAKEFIELD NO.1 - - 4.75". Some pitting.
(3.) MOSSBERG A-2 - - 5.5". Jaw damage.
(4.) PAT'D JUNE 7TH 1892 (with a "G" in diamond logo)- - 4.5" turn handle to adjust nut wrench made by the Gendron Iron Wheel Co. of Toledo, Ohio. Wrench patent was issued to Peter Gendron of Toledo, Ohio. Has a wooden knob on the end of the handle. Original or owner modified?.  PAT
(5.) U. S. WRENCH CO. - BOHN QUICKFIT - PAT '24 - PHIL. PA - - 5.75" wedge adjust nut wrench. Patent was issued to George Bohn and Fred Werner of Milwaukee, Wisc. on Jan. 22, 1924. Good++. (S547, C308)

0322. WALWORTH MFG. CO. BOSTON, MASS - - 12" wooden handle quick adjust with complex rack type adjustment. Fair with spots of pitting, broken spring, tight handle crack. From the Elmo Rinehart Collection Auction. (S728, patent not found)

0323. LACHEZE (with lion logo) - - 12" Crescent type with offset, curved handle. Good+.. (like S758)

0324. Lot of Two: ADJUST-A-BOX - PAT NO. 2,912,891 / MFD. USA - - Screw adjust box end wrenches. Patented by Ted Neff of San Bernardino, Calif. (not listed)  PAT
(1.) 12". Good++.
(2.) 8". Excellent.

0325. CRAFT 8 IN / THE CRAFTSMAN TOOL CO. CONNEAUT, O. - PAT NOV 1907 - - 8" size of the Craft roller jaw wrench, exposed gear variation. Patented Nov. 12, 1907 by George Heckling of Cleveland, Ohio. Good with some dings. (S663, 664)  PAT

0326. Lot of Two: GELLMAN WRENCH CORP. - ROCK ISLAND, ILL USA - POLLY / PATENTED APRIL 17, 1923 - 12 IN. NO. 121 - - 12" size quick adjust nut wrenches patented by Israel Gellman of Chicago, ILL.  PAT
(1.) Internal spring variation. Good+.
(2.) External Spring variation. Good+.

PiCs Lots 319 thru 326

0327. BESSEMER / GROVE CITY, PA. - - 11.5" gas engine wrench. Good+. (R1-52, R2-35)

0328. POST'S TONGUELESS (Egbert Benson Co. - Raritan, New Jersey) - - 7.25". rare wrench, first one we have listed. Pitted (R1-384)

0329. FULLER & JOHNSON (Madison, Wisc.) / 2P30 - - 8.75". One square box opening variant. Good+. (R1-191)

0330. Lot of Four: Rock Island Plow Co. Wrenches
(1.) 34 (Rock Island) - - 7.5". Good+. (R1-400)
(2.) R1122 / ROCK ISLAND - - 10.25". Excellent. (R1-400)
(3.) ROCK ISLAND / R1123 - - 7.75". Good+. (R1-400)
(4.) ROCK ISLAND / R1124 - - 5.75". Some pitting. (R1-400)

0331. OLIVER - RP210 / OLIVER - - 13.25". Good+. (R1-361)

0332. OLIVER / CP245 - - 9.25". Good+, some light pitting. (R1-361)

0333. DP109 (Oliver) - - 11.75". Good+, minor dings. (R1-360)

0334. AMERICAN HARROW CO. - DET. MICH./ DD198 - - 13". Rusty, light pitting..

0335. J. P. MANNY. (John P. Manny Mower Co. of Rockford, ILL. later Emerson-Brantingham.) - - 12". The John P. Manny Co. was founded in 1857. Good++. painted. (R1-309)

0336. KINGMAN PLOW CO. (Peoria, IL) / N81 - - 10.75". Some light pitting, edge hammer damage. (R1-284)

0337. KINGMAN PLOW CO (Peoria, IL) / N80 - - 8.75". Good+, minor edge damage. (R1-284)

0338. 4271 (Avery gas tractor, Peoria, ILL) - - 10.75". Good++, weak markings as usually found.(R2-18)

0339. Lot of Two:
(1.) MOLINE DRILL (with a M & I logo) / A1037 - - 8.5". Good++. (R1-332)
(2.) K436 (Moline Plow Co) - - 9". Good+, weak markings. (R1-333)

PiCs Lots 327 thru 339

0340. 1B5171 (with a horizontal "T" logo) (Caterpillar Tractor Co. - Peoria, Illinois) - - 8.5". Drain plug wrench. Good+. (R3-43)

0341. Lot of Three: Look A Like Wrenches (with a small hammer head). Will be sold choice wrench.
(1.) C206 (Kingman Plow Co - Peoria, Illinois) - - 10.75". Scarce Kingman wrench. Jaw corner crack. (R1-284)
(2.) D137 (Chattanooga, IHC, David Bradley) - - 10.75". Pitting. (R1-99)
(3.) SANDERS A25 (Newell Sanders Plow Co. - Chattanooga, TN - later IHC) - - 11". Rare wrench only one owner listed on the IHC Owner's List, first on we have had to auction. Good+. (R3-163)

0342. MORRISON MFG CO (Ft. Dodge, Iowa) - - 10". Good+. minor pitting, edge ding.. (R1-340)

0343. HARDER / X60 (Harder Mfg. Co. - Cobleskill, NY) - - 9.25". Excellent. (R1-216)

0344. NEWELL SANDERS PLOW CO - A260 / "P" in a square logo (later IHC) - - 18.5". Good+, some original paint. (R1-351)

0345. SANDERS / A416 (Newell Sanders Plow Co. - Chattanooga, TN - later IHC) - - 13". Some pitting, not cleaned. (R1-411)

0346. NEWELL SANDERS PLOW CO / A163 (later IHC) - - 8.5" with hammer head. Pitting. (R1-351)

0347. SANDERS A24 (Newell Sanders Plow Co - later IHC) - - 11.25". Rare Sanders wrench with a disk straightener. Good+. (R1-421)

0348. EMERSON / W1074 (Emerson-Brantingham, Rockford, ILL) - - 16". Painted.

0349. SUPER MOGUL SUPER SPECIAL / M350 USE FOR AXLE NUTS ONLY (Standard Ditching Machine Co. - St. Louis, MO) - - 15.5". Good+. (R1-436)

0350. Avery / 251 (Avery Co. - Peoria, ILL) - - 7.25". Good++, not cleaned. (R1-26)

0351. 95 - VULCAN PLOW CO / EVANSVILLE IND - - 7.25". Good+. (R1-475)

0352. MORRISON 260 (Morrison Mfg. Co. - Fort Dodge, Iowa) - - 10". Good++. (R1-340)

0353. TAGUE & KERLIN WRENCH / MIDLAND MFG. CO. - TARKIO MO. USA - 2 - - 8.75". Good+, few edged dings. (R1-326)

0354. A252 (Avery Co. - Peoria, ILL) - - 5" x 5" double L-socket for Avery Gas and Kerosene Tractors. Good+ with usual light markings. (R2-18)

PiCs Lots 340 thru 354

Fence and Wire Tools (lots 355 thru 368)

0355. MFD. BY REIN LEITZKE - HUSTISSFORD, WIS. / WS1 - - 25.5 cast fence stretcher. Open handle variant. Excellent. (Smith 310)

0356. Unmarked - - 17" combination fence tool with center ridge inside handles. Good++. (Smith 128)

0357. MICH. WIRE FENCE CO. - - 15.25" combination fence tool with an open wrench on the end. Looks like same tool as Smith 97 (Church Bros.). Rusty, not cleaned.

0358. ATOMIC GLASKIN MFG - PAT PENDING - - 4.5" malleable cast combination saddle tool with hammer, fence tightener, nail claw, stable puller, etc. Patented Sept. 27, 1949 by James B. Glaskin of Colorado Springs, Colorado. Good++. (Smith 723)  PAT

0359. PAT. JUNE 11 - 82 - PAT JULY 5, 81 - JULY 13, 80 - JUNE 29, 1875 - - 15". Crank type fence stretcher. Listed in Smith's as the "Little Giant Junior". Patents were issued to Reuben Ellwood and others of Sycamore, Illinois. Good+.. (Smith 215)  PAT -  PAT -  PAT -  PAT

0360. M. KLEIN & SONS - CHICAGO USA (Klein's lineman climbing pole logo) - - 6.5" heavy wire tug or grab. Excellent. (like Smith 765)

0361. U.S. WS. CO. (Wm Schollhorn Co,) 1945 - - 9.25" World War II military wire cutters with correct sheath. Hard rubber like handle coating. Patented Jan. 18, 1943 by John W. Geddes of Watertown, Mass. and assigned to the H. K. Porter Inc. Good++. (Smith 100)  PAT

0362. BROWN FENCE CO. - CLEVELAND O. - - 10.75" cast fencing tool with a ratcheting center section and lever lock. This is part of a two part tool. Good+ with overall light pitting or casting roughness. (Smith 701)

0363. Unmarked - - 10" fencing pliers double hammer style. Holes in handle for twisting wires. Good++. (Smith 44)

0364. PAT NOV 20, 94 - - 9.5" cast combination hammer with a staple puller claw, nail-pulling slot, wire splicing handle end, and wrench with multiple sizes under the staple claw. Patented by John H. Hebblethwaite of Rock Falls, Illinois and advertised as the Everlast. Good+. (Smith No. 178, S795)  PAT

0365. MILBAR - USA - - 11.5" automatic twisting pliers with wire cutter. Excellent.

0366. MILBAR WIRE TWISTER - PAT. APPL. FOR - - 11.5" automatic wire cutter and twisting pliers. Good++.

0367. Unmarked - - 10" Cronk type pliers with two wire cutters and an unique swivel attachment. Described in a "new product" description" in the Jan. 1994 issue of "Iron Age" magazine as a "Button Combined Pliers and Stretcher". Good+ with some light pitting. (couldn't find in Smith's book)

0368. Unmarked - - 12.25" hatchet comb. tool with hammer, pincers, nail claw, screwdriver and leather punch. John Morris Pat of July 19, 1898 probably applies. Good+. leather punch is missing. (Smith No..11, S802)  PAT

PiCs Lots 355 thru 368

0369. Socket set in unmarked wooden box with ratchet marked DURO METAL PROCUCTS CO - CHICAGO - 672 - PATENT PENDING, universal joint, 9.5" extension and several sockets (some have the Mossberg logo),

0370. Mossberg socket set in an unmarked metal box with a Mossberg No. 366 ratchet, universal joint, 9.25" extension, and twenty-seven sockets.

0371. Socket set in metal tray with a partial SHERMAN-KLOVE decal (early S & K). Set contains a ratchet marked 10570 THE SHERMAN-KLOVE CO. - CHICAGO, USA, eight sockets (marked with the size only), L-shaped breaker bar and a screwdriver bit socket.

0372. Socket set in metal tray with a FULTON VALUE LEADER decal. Set contains nine sockets, breaker bar, extension and an adapter (all unmarked).

0373. Mossberg socket set in wooden box with a MOSSBERG SET No. 14 decal. Set contains a Mossberg 350 ratchet, universal joint, extension, L-shaped breaker bar, adapter and thirty-six sockets including a special oval socket for Ford crankshaft bearing bolts.

PiCs Lots 369 thru 373

0374. Socket set with a ratchet marked: NO. 602 GRAY - TORONTO - CANADA, a 10.5" extension marked 694 and GRAY in a diamond logo, unmarked tee handled driver with swivel grip, 90" l=shaped driver and twenty-five unmarked forged sockets (couple different styles)

0375. Socket set in metal box with a partial Hinsdale label with a ratchet with a Hinsdale logo. 10" l=shaped socket driver, 8" extension, universal joint, adapter, and thirty-four sockets marked with the fractional size and Hinsdale logo. As found, not cleaned.

0376. Socket set with cast ratchet marked: CHICAGO MFG. & DISTRIBUTING CO. - CHICAGO / PATENTED MARCH 10, 1914 ("CH" logo). a 9: extension, universal joint, odd adapter with set screw and seventeen heavy cast sockets marked with a the fractional size and a part number..

0377. Partial socket set in wooden box (missing lid) with a 8.5" cast L-shaped socket handle marked "F3", 9" cast extension "A26", fourteen cast sockets marked with the fractional size and part number, plus four misc. sockets. As found, not cleaned.

0378. Socket set in small lithographed tin box: QUICKWAY SOCKET WRENCH SET A -BETHLEHEM SPARKPLUG CO - BETHLEHEM, PA (with picture of L-shaped driver) - - 4.5" with seven sockets, L-shaped driver and an extension. Good++.

0379. Assortment with two ratchets marked: BETHLEHEM SPARKPLUG CO - BETHLEHEM, PA , an universal joint, a hex drive plug and fifteen sockets.

PiCs Lots 374 thru 379

0380. ARMSTRONG - BRIDEPORT CONN USA - - 12.75" heavy cast ratcheting drill with hand rest knob. Excellent.

0381. NETTLEFOLDS LTD. - WESTON'S PATENT - 445 / OTIS ELEVATOR - - 15.25" ratcheting drill with neat twin external gears. T. A. Weston of Buffalo, NY received five patents for ratchets on March 3, 1868. Excellent.  PAT

0382. SAMUEL OSBORN - CLYDE STEEL - SHEFFIELD - No. 010 - - 15" ratcheting drill with heavy cast body and simple external gear. Good+, weak markings.

0383. TOLEDO - - 14.25" ratcheting, reversible drill with cast body and extra long post. Excellent.

0384. Marked only "14 IN" - - 15.5" reversible, ratcheting drill. Excellent.

0385. MILLER FALLS CO. - MILLER FALLS, MASS. USA - - 12.25" ratcheting, reversible drill. with a drill bit adapter. Good++.

0386. PRATT & WHITNEY & CO. - HARTFORD, CONN. - No. 1 - - 9.5" ratchet drill. Good++.

0387. C. PARKER MERIDEN CT. - PAT'D NOV. 3, 1874 - - 11" ratchet drill. Patented was granted to Henry Smith of Meriden, Conn. and assigned to Charles Parker also of Meriden. Good+, some weak markings.  PAT

0388. THE ASHCROFT MFG. CO. - BRIDGEPORT & NY / No. 1 - - 11.75" ratchet drill. Good+, weak markings, some not readable.

0389. Unmarked - - 14.5" ratchet drill with an unique external ratchet mechanism. Good+.

0390. G. W. SMITH - PAT. JUNE 5, 1883 - - 11.5" ratchet drill. Patent was granted to George W. Smith of Boston, Mass. Good++.  PAT

0391. ARMSTRONG - CHICAGO USA (with arm & hammer logo) / No. 15 STANDARD RATCHET - - 16.5" reversible ratchet drill. Good++.

PiCs Lots 380 thru 391

0392. Marked only "No. 38" - - 12" ratchet drill with external ratchet. Good+.

0393. A. R. KING MFG. CO. - KINGSTON, NY - PACKER RATCHET - No. 1 - - 11.5" ratchet drill. Good+.

0394. ARMSTRONG - CHICAGO USA / No. 9 (with arm & hammer logo) - - 10" reversible ratchet drill with drill bit and adapter. Good++.

0395. ARMSTRONG - CHICAGO USA / No. 9 (with arm & hammer logo) - - 10" reversible ratchet drill. Good++.

0396. WHITNEY'S NEW RATCHET - PAT'D JAN 29, 84 - NOV. 10, 85 - MADE BY P. S. & W. CO. (Peck, Stow & Wilcox) SOUTHINGTON, CONN. - - 8.25" small ratchet drill (with a short and a long nose piece.) in the original wooden box. Patents were issued to Pardon A. Whitney of Cleveland and later Chagrin Falls, OH. Tool is excellent, box is missing the lid  PAT -  PAT

Brass, Aluminum-Bronze (AL BR) and Beryllium-Copper- (BE CU) Wrenches and Other Tools (Lots 397 thru 421)

0397. AMPCO - W675 - 1-5/16 / AL BR - - 19.5" comb. box end by open end. Excellent, like new. (new price $102.37)

0398. AMPCO - W672 - AL BR - 1-1/16 - - 17" comb. box end by open end. Excellent, like new. (new price $131.68)

0399. AMPCO - W3261 USA - 1-1/4 - / 1-5/16 - - 19" double box end. Excellent. (new price $106.43)

0400. AMPCO - BERYLLIUM - W817 - MADE IN USA - 1-1/16 / 1 - - 18" double box end. Good++. (couldn't find this size listed in current catalogs)

0401. BERYLCO - 1-1/8 / W997A - 1-5/16 - - 18" double box end. Excellent, like new.(new price $97.55)

0402. AMPCO - W3210 - USA - 7/8 / 1 - - 13.5" double box end. Excellent, like new. new price $85.33).

0403. AMPCO - AL BR - W58S - USA - - 15" Beryllium universal bung wrench. Good++.(new price $77.26).

PiCs Lots 392 thru 403

0404. Lot of Two:
(1.) WP-6-ST - AMPCO - ALBR ("FM" in a diamond logo) - - 9.75" self adjusting hook spanner wrench. Excellent, like new (New price $77.64)
(2.) MILWAUKEE VALVE CO. - - 8" brass valve wrench for bulk fuel tanks?. Good+, few minor dings.

0405. AMPCO W831 -MADE IN USA - 1-5/16 - 1-1/4 - - 14.5" double open end wrench. Good+ (new price $112.74)

0406. AMPCO - W811 - MADE IN USA - 1-1/16 - 15/15 / BERYLLIUM - - 11" double open end wrench. Good+ with some light grind marks. (new price $69.00)

0407. Lot of Three:
(1.) AMPCO - W82 - 1-1/4 - 1-1/16 - - 12.25" double open ended wrench (1-1/4" by 1-1/16"). Drilled hang hole. (new price $80.46)
(2.) AMPCO - W732C - ALBR - 7/8 - 15/16 - - 9.5"" double open ended wrench (7/8" by 15/16"). Excellent, like new) (new price $60.79)
(3.) AMPCO - W80 - BERYILLIUM - U.S. / MADE IN USA - - 9.5"" double open ended wrench (7/8" by 15/16"). Excellent, like new)

0408. Lot of Three:
(1.) AMPCO - W718 - 11/16 - 7/8 - - 7.25" double open ended wrench (11/16" by 7/8"). Good++. with stamped owner's initials. (new price $50.53)
(2.) AMPCO - W706C - 9/16 - 3/5 - - 7.75" double open ended wrench (9/16" by 3/4"). Excellent, like new. (new price $50.53)
(3.) AMPCO - W313 - BERYLLIUM - - 9.75" double offset box end wrench. Good++. (W313 is not listed in current catalogs)

0409. Lot of Six:
(1.) AMPCO - W651 - ALBR - 11/16 - - 10" combination open end by box end wrench (11/16"). Excellent (new price $61.35)
(2.) AMPCO - W611 - ALBR - 11/16 - - 7.25" combination open end by box end wrench (7/16"). Excellent (new price $46.84)
(3.) AMPCO - W1219 - USA - 9/16 - - 6" combination open end by six point box end wrench (9/16"). Good+. (not listed in current catalogs)
(4.) AMPCO - W718 - USA / 7/8 - 11/16 - - 5.25" double open ended wrench (7/8" by 11/16"). Excellent, like new. (new price $50.53)
(5.) AMPCO - W88 - 11/16 - 1/2 / MADE IN USA - - 6" double open ended wrenches with angled heads (11/16" by 1/2"). Excellent. like new. (not listed in current catalogs)
(6.) AMPCO - W699 - AL BR / 7/16 - 1/2 - - 5.25" double open ended wrench (7/16" by 1/2"). Good++. (new price $34.78)

0410. C-26 BERYLCO - BECU - - 10.5" large, heavy cold chisel. Excellent, like new (new price $118.54)

0411. Lot of Four:
(1.) AMPCO - C18 - B.C. / MADE IN USA - - 8.5" cold chisel. Good +. (list price $46.37)
(2.) BERYLCO USA / C18 BECU - - 6.75" cold chisel. Excellent. (not listed in current catalogs)
(3.) BERYLCO - C23 / BE CU(all markings are high relief embossed) - - 8.5" cold chisel. Excellent. (not listed in current catalogs)
(4.) BERYLCO - W128 / BE CU - - 9" wedge. Excellent. like new. (not listed in current catalogs)

0412. Lot of Two:
(1.) AMPCO - CS25ST - ALBR - - 7" chisel (listed as a "pneumatic scaling chisel". Excellent. (new price $73.98)
(2.) AMPCO - S40 - USA - - 9.25" scraper with open handle. (listed in catalog as "spray booth scraper). Good++. ($34.56 new price)

0413. Lot of Five:
(1.) Markings too small to read - - 6" small brass die holder, Good++ but missing tightening bolt and nut.
(2.) AMPCO - S1005 - BECU - USA - - 7.25" all metal double ended offset screwdriver. Excellent, like new. (new price $58.45)
(3.) AMPCO MDETAL / MILWAUKEE - - 2.75" screwdriver bit. Excellent, like new. (not listed in current catalogs)
(4.) Unmarked - - 5" all brass ball peen hammer. Excellent.
(5.) AMPCO - BERYLLIUM - - 4.25" some type of chisel for drill brace? Good+. (not listed in current catalogs)

0414. Lot of Three:
(1.) Unmarked - - 10" Beryllium spatula like tool with wooden handle. Blade is Excellent, handle shows some repairs. ($34.50 new price)
(2.) K-30 - AMPCO - MILWAUKEE - - 6.25" scraper with Beryllium blade and wooden handle. Good++. (new price $32.94)
(3.) K-20 - AMPCO - BE-CU - - 7.75" putty knife with Beryllium blade and wooden handle. Good++. ($22.48 new price)

0415. Lot of Three:
(1.) Marked only "N" - -5.25" brass specialty pliers. Excellent. (not listed, no info found)
(2.) Marked only "BB" - - 8.75" brass odd cone nosed pliers. Excellent. (not listed, no info found)
(3.) Unmarked - - 6.5" brass odd brass nosed pliers. Good+. (not listed, no info found)

0416. APEX ELEC-CO 2376 - - 11.5" brass oddball combination wrench. Good++, polished.

0417. APEX - 2827 - - 9.5" brass oddball combination wrench. Good+, polished, some edge hammer damage.

PiCs Lots 404 thru 417

0418. RITTER 1 - 2 - 3 - 4 (same markings both sides) - - 6.75". Non magnetic bronze like metal. Good++.

0419. 1-1/4 - AMPCO - W41 - USA - - 10.75" single hex box wrench (1-1/4"). Excellent, like new. (new price $164.40)

0420. 1-7/16 - AMPCO - W42 - USA - - 12.25" single hex box wrench (1-7/16"). Good++. (new price $184.73)

0421. Lot of Three: Ampco ALBR Double Box End Wrenches
(1.) AMPCO - USA - 3/4 / W3180 - AL BR - 7/8 - - 12.5" double box end (3/4" by 7/8"). Excellent, like new. (new price $60.65)
(2.) AMPCO - 1/2 / W3130 - AL BR - 9/16 - - 9" double box end (1/2" by 9/16"). Excellent. (new price $40.95)
(3.) AMPCO - 7/16 / W3120 - AL BR - 1/2 - - 8.25" double box end (1/2" by 7/16"). Excellent. (new price $35.16)

0422. 5/8 - THE H.D. SMITH & CO. / "PERFECT HANDLE" PATENTED - - 9.5" knife type wood handled single open ended wrench. Good with some edge dings, on rough slab.

0423. "PERFECT HANDLE" - - 10" ball peen hammer with knife scale wooden handle. Chips on hammer head face, other dings.

0424. THE H.D. SMITH & CO. / "PERFECT HANDLE" PATENTED - - 11.25" knife type wood handled single open ended wrench. Good+.

0425. 1-5/16 - THE H.D. SMITH & CO. / "PERFECT HANDLE" PATENTED - also marked: BROWN & SHARPE MFG. CO. - PROVIDENCE, R. I. - - 11" knife type wood handled single open ended wrench. Good+ with a handle chip.

0426. 1/2 - THE H.D. SMITH & CO. / "PERFECT HANDLE" PATENTED - - 7.5" knife type wood handled single open ended wrench. Good with some pitting.

0427. 1/2 - THE H.D. SMITH & CO. / "PERFECT HANDLE" PATENTED - - 7.5" knife type wood handled single open ended wrench. Good with some dings.

0428. "PERFECT HANDLE" TRIMONT MFG. CO. - ROXBURY, MASS. USA - - 10" monkey wrench with knife type wooden handle. Good with some dings.

0429. Lot of Nine: Perfect Handle Type Wooden Handled Screwdrivers
(1.) IRWIN - USA - - 11.5".
(2.) THE H. D. S. & CO. (H. D. Smith & Co.) - PATENTED - "PERFECT HANDLE" - MADE IN PLANTSVILLE, CONN. U.S.A. - - 11".
(3.) Unmarked - - 11.25".
(4.) Unmarked - - 10".
(5.) Unmarked - - 9.25".
(6.) Unmarked - - 9".
(7.) CW (can't read rest of the markings) - - 9".
(8.) IRWIN - USA - - 8.25".
(9.) THE H. D. S. & CO.(H. D. Smith & Co.) - PATENTED - "PERFECT HANDLE" - MADE IN PLANTSVILLE, CONN. U.S.A. - - 8.25".

0430. THE H. D. SMITH & CO. - MADE IN PLANTSVILLE, CONN. USA / "PERFECT HANDLE" PATENTED - - 13.5". Advertised for use as a tire tool or automotive pry bar. Design patent issued to by Lucius Walkley of Plantsville, CT. on July 8, 1913. Good+.  PAT

0431. Lot of Five: Wooden Handled Screwdrivers
(1.) STEEL WARRANTED - GERMANY - - 13.25" with square shaft base.
(2.) WM JOHNSON - Newark, NJ - - 12".
(3.) 100 PLUS - STANLEY No. 1001 - - 10.5" Fair.
(4.) HERCULES - D. H. M. CORP. - MADE IN USA - - 8.5" with square shank.
(5.) STEEL WARRANTED - GERMANY - - 9"" with square shaft base.

0432. Lot of Eight: Perfect Handle Type Wooden Handled Screwdrivers. One HIBBARD, one TORBIN, three marked GERMANY, rest are not marked, 4.5" to 8.25" long.

PiCs Lots 418 thru 432

0433. Book - COLLECTOR'S GUIDE TO EARLY AMERICAN TOOLS by Phil Gault - - Published in 1975 with 96 pages of early wood working tools and wrenches pictured and priced.

0434. Book - EAST - WEST ANTIQUE WRENCHES & TOOLS by Marvin Wullweber - - Published in 1979 with 24 pages. Wullweber's second book on antique wrenches. Reprint in a two hole protective cover.

0435. Book - My SECOND 1000 WRENCHES by Donald D. Snyder - - Published in 1992. 67 pages. Sequel to Snyder's "My First 100 wrenches". Reprint in a three hole protective cover.

0436. Book - NORTHERN PLAINS ANTIQUE WRENCHES & TOOLS - 1977 SUPPLEMENT by Marvin Wullweber - - Supplement to Wullweber's pioneer antique wrench book which was published in 1976, thirteen year before Al Schulz's book. Some of the pictures for Wullweber's books were used in Schulz's

0437. Book - CAST IRON IMPLEMENT SEATS III by Donald E. Sites - - Book published in 1977. 810 seats pictured and priced.

0438. Lot of Two: Corn Collectibles
(1.) Unmarked - - 8" corn husker's thumb guard? Repaired.
(2.) DEKALB (with winged ear of corn logo) - - 12" plastic soil temperature thermometer. Excellent.

0439. M'F'D. BY THE COOKSON ELEVATOR CO. - K.C. MO. - - 4.75" by 12.25" cast iron name plate. Excellent.

0440. Lot of Seven: Six Small Block Planes and one Saw Jointer
(1.) STANLEY - USA (on iron) - - 3.5" small block plane Stanley No. 101.
(2.) PAT'D SEPT. 8, 1903 - - 5" cast saw jointer patented by William M. Potter of Syracuse, NY and manufactured by E. C. Stearns & Co. of Syracuse, NY.  PAT
(3.) X-ACTO - USA - - 3.75" small block plane.
(4.) Marked only "AMT" - - 4.5" small block plane with handle.
(5.) Marked STANLEY - MADE IN USA (on the iron) - - 4" Stanley No. 75 Bull Nose Rabbet Plane.
(6.) Unmarked - - 3.5" small block plane. Excellent.
(7.) Marked only "106" - - 5.25" block plane. Weld repaired cap.

0441. DECKER ANIMAL MARKER - KEOKUK, IOWA - PAT APP'D FOR - - 9.75" ear notcher and stout cutter. Excellent with original finish in box with instruction sheet and one extra marking die.

PiCs Lots 433 thru 441

0442. LANDERS IMPROVED BALANCE No. 2 - NEW YORK - - 10" hanging scale. Good++.

0443. Lot of Seven: Advertising Give-A-Way Tools
(1.) BE SHARP TRADE WITH YOUR NEIGHBOR - LEWIS COOPERATIVE - LEWIS, KANSAS - - 3.5" pocket sharpening stone with pouch.
(2.) WICHITA MARRIOTT - - 5.5" pocket flashlight and ball point pen.
(3.) SUNFLOER ELECTRRIC SUPPLY INC. - HUTCHINSON - GREAT BEND - LIBERAL (Kansas) - - 6" double ended screwdriver.
(4.) WICHITA DOOR CONTROLS - WICHITA, KS Etc. - - 5.5" pocket screwdriver and magnet.
(5.) DWIGHT SHANK CHEVROLET (with Chevy bow tie logo) - Larned and Burdett, KS - - 5.25" pocket screwdriver.
(6.) MINNEAPOLIS MOLINE - P. W. DARK - DODGE CITY, KS - - 4.75" pocket screwdriver.
(7.) DURACELL - - 3" Phillips screwdriver in shape of a Duracell battery.

0444. Unmarked - - 3.25" miniature anvil. Excellent.

0445. Lot of Four: Small Water Pump type Pliers
(1.) PROTO - 231 - MFD USA - - 4.75".
(2.) PROTO - 235 PROFESSIONAL - USA - - 4.5".
(3.) ARTISAN (a Gambles store brand) - - 5".
(4.) P & C CO - 1235 - MFD USA - - 4.5". P & C of Milwaukie, Oregon was acquired by Plomb in 1941.

0446. Tool is not marked but box and instruction sheet identify as THE GRIFFIN RUG MACHINE MFD. BY G. W. GRIFFIN CO. - FRANKLIN, NH - PATENT AUG. 23, 1881 - APRIL 13, 1886 - - 9.5". Patents were issued to George W. Griffin of Franklin, NH. Tool is absolutely mint but the box has been torn in half. Box contains an instruction sheet and several accessories or parts.  PAT - -  PAT

0447. Lot of Five: Misc. Small Tools - Including an all metal machinist's hammer, claw hammer with three nested screwdrivers in the hollow handle and three small screwdrivers.

0448. BUELL BROS CO, - CLINTON, CONN USA - - 5.5" hollow handle tool holder with eight bits. Good+.

0449. Lot of Three: Misc. Tools
(1.) B. M. CO. - ELIZ., NJ (Braunsdorf Mueller Co. - Elizabeth, NJ) - - 10.25" wooden handle bearing scraper.
(2.) No markings but US ORD scratched into blade. - - 8" wooden handled triangular bearing scraper?
(3.) DURBIN-DURCO - ST. LOUIS, MO / FH1 - - 8.5" cast handle file holder with file.

0450. Lot of Seven: Misc. Pliers
(1.) Unmarked - -7.75" battery pliers.
(2.) SUPREME NIPPER / KRAUETER 1851-7 - - 7" end nippers.
(3.) Unmarked - - 9" Eifel Plierench. Looks like the markings were machine off.
(4.) I. P. S. (in an oval logo) - IGARASHI - 6.25" slip joint pliers.
(5.) CAM-ROM - USA - - 6" slip joint pliers.
(6.) GERMANY - - 7" slip joint pliers with finger grip handles. Might be a Volkswagen took kit pliers
(7.) CEE TEE CO. (Crescent Tool Co.) MADE IN USA - - 5.25" slip joint pliers. Excellent.

0451. Lot of Eight: Four Inch (and smaller) Crescent Type Adjustable Wrenches - Including three Crescent Crestoloy, one older style Crescent, one Diamond Calk Horseshoe Co., and three key chain types, one marked TAIWAN other HONG KONG.

0452. Lot of Four: Wooden Handled Screwdrivers.
(1.) LENOX - 10 - - 16" Perfect Handle Type extra large screwdriver.
(2.) PROTO 9708 - LOS ANGELES - MFD USA - - 14.75" wooden handled screwdriver.
(3.) Unmarked - - 11" Perfect Handle Type screwdriver.
(4.) BROOKSTONE - MADE IN ENGLAND - - 13.75" flat shaft screwdriver. Blade is pitted with grind marks, repaired handle.

PiCs Lots 442 thru 452

0453. WINCHESTER TRADE MARK - MADE IN USA - 1528 / 7/16 STD - 3/8 STD - - 9" double open end S-wrench. Good+.

0454. WINCHESTER TRADE MARK - MADE IN USA - 1537 / 7/16 STD - 1/2 STD - - 10.25" double open end S-wrench. Good+.

0455. WINCHESTER TRADE MARK - MADE IN USA - 1829 / 7/16 (hex symbol) - 9/16 (hex symbol) - - 6" double open end S-wrench. Light pitting, minor jaw lip chip.

0456. WINCHESTER TRADE MARK - MADE IN USA - 1740 / 5/8 SAE - 11/16 SAE - - 8.25" double open end wrench. Some patches of very light pitting..

0457. WINCHESTER - TRADE MARK - MADE IN USA - 2457 - 7" - - 7" slip joint pliers with screwdriver end. Good+ with most of the original plating.

0458. WINCHESTER TRADE MARK - OCTOBER SPECIAL - - 6" slip joint pliers with screwdriver end and wire cutter. Good++ with some minor edge dings and 90 percent plating.

0459. WINCHESTER - TRADE MARK - MADE IN USA - 4553 - 5/16 - - 5.5" cape chisel for cutting keyways, etc. Rare Winchester tool. Looks like it was hardly used but does have some pitting.

0460. WINCHESTER TRADE MARK NO. 1001 - - 6.25" monkey wrench with wood knife type handle. Good, shaft is bent, handle crack..

0461. WINCHESTER - TRADE MARK - MADE IN USA - SPECIAL- - 14" wooden handled hatchet. Handle is poor with a drilled hang hold. Blade has been ground.

0462. WINCHESTER TRADE MARK NO. 1005 - - 15" monkey wrench. This one needs a little TLC, the handle is bent and the wood slabs are missing. some hammer marks on back of handle. No photo.

0463. WINCHESTER - TRADE MARK - MADE IN USA - - 15.5" wooden handled hatchet. Good+.

0464. WINCHESTER - TRADE MARK MADE IN USA - 1021 / PAT. 3-14-22 - - 10" wooden handled pipe wrench. Patent was issued to Guy C. Claypoole of Hamden, Conn. and assigned to the Winchester Repeating Arms Co. Good+..  PAT

0465. KEEN KUTTER (with Keen Kutter logo) / DROP FORGED - - 9.25" all metal Stillson type PIPE WRENCH. Good++..

0466. KEEN KUTTER - FORGED STEEL - MADE IN USA (with Keen Kutter logo) / SIMMONS HARDWARE CO. USA - - 6" Crescent type adjustable wrench. Rare size.. Good++.

0467. 10 in, KEEN KUTTER - MADE IN USA - - 10" Crescent type adjustable wrench. Good++.

0468. Lot of Three: Wire tools
(1.) MILBAR SAFETY TWIST - 1 - USA - - 11.75" automatic twisting pliers with wire cutter. Excellent.
(2.) 256 1944 (with an arrow head logo) - ENGLAND - - 15.5" World War II British military folding handle wire cutters. Good++. (couldn't find in Smith's Book)
(3.) M. KLEIN & SONS - - 10.75" wire crimper.

PiCs Lots 453 thru 468

0469. EXCELSIOR - - 21" cast fence stretcher. Excellent. (similar to Smith 324)

0470. Marked only "F41" - - 11.5" cast wire tightener. Patented by Joshua Simeon Guyton of Granger, Missouri..Good++. (Smith 152)

0471. J. S. GUYTON - PAT. AUG. 20, 89 - - 13.25" cast wire tightener. Excellent. (Smith 135)  PAT

0472. STORTZ & SON - PHILDA, PA. (with a crossed swords logo) - - 9.25" box or crate tool.. Good+.

0473. DIAMOND (in a diamond logo) - ALL PURPOSE TOOL - DULUTH USA - - 7.25" box or crate tool. Weak markings, grind marks.

0474. Lot of Three: Box or Crate Tools
(1.) BIXBYS BOX OPENER / BOX TERRIER - - 9". box or crate tool. Good+.
(2.) JOHN H. MURCOTT (Murcott in script) INC. - ST. ALBANS, NEW YORK - - 9" box or crate tool. Good+.
(3.) C. E. B. MFG. CO. (C.E. Bonner Mfg. Co. - Champaign, Ill). / PAT MCH 5. 1901 - - 8.75" box or crate tool. Patented as a "Nail-Extracting Prying-Bar" by Alfred G. Thom of Waukegan, ILL. Good+.  PAT

0475. C.E. BONNER MFG. CO. - CHAMPAIGN, ILL. / PAT MCH 5. 1901 - - 8.75" box or crate tool. Patented as a "Nail-Extracting Prying-Bar" by Alfred G. Thom of Waukegan, ILL. Good+, some weak markings.  PAT

0476. BABY TERRIER WARANTED STEEL / THE BRIDGEPORT HDWE MFG CORP - MADE IN USA - - 6.75" box or crate tool. Good++..

0477. DIAMOND (in a diamond logo) - ALL PURPOSE TOOL - DULUTH USA - - 10.5" box or crate tool. Plated finish. Good++ with some hammer mushrooming.

0478. - RIPPER - BRIDGEPORT HDWE. MFG. CORP. / PAT. APPL'D FOR (in a fancy ribbon logo) - - 8.5" box or crate opener with a ripper blade. Goods++. (patent not found)

0479. DIAMALLOY - DULUTH, MINN. / GURANTEED TOOL STEEL - D. C. H. CO. DULUTH - -11" box or crate tool. Drilled hang hole.

0480. WEBER SUPPLY CO. - MOMENCE ILL - - 9" box or crate tool. Good++.

0481. BIXBYS BOX OPENER / BOX TERRIER - - 9". box or crate tool. Good++.

0482. MATCHLESS - PATENTED SEPT. 29. 1908 / THE BRIDGEPORT HDWE. MFG. CORP - BRIDGEPORT, CONN. USA - - 12.25" box or crate combination tool with wood slab handles. Patented by Willis F. Hobbs of Bridgeport, Conn. Good+.  PAT

0483. Lot of Three: Box or Crate Hammers
(1.) KELLOG CORN FLAKES - - 9.75". Severe pitting.
(2.) NOX-TOX, Etc. / THE BRIDGEPORT HDWE. MFG. CORP - BRIDGEPORT, CONN. - MADE IN USA - - 9.25". Fair.
(3.) BIXBYS BOX OPENER / BOX TERRIER - - 9". Weak markings.

0484. Lot of Five: Unmarked Box or Crate Hammers

PiCs Lots 469 thru 484

0485. Lot of Four: Combination tools with hammer, chisel and fencing staple or cotter key puller. Three Enders (all different markings) and one unmarked, 7.25" to 7.75". .

0486. Lot of Three: Combination tools with hammer, chisel and fencing staple or cotter key puller. Enders (all different markings).7" to 7.75".+ 7.25" to 7.75".

0487. SCHILD MFG. CO. - MILWAUKEE, MN - PATENT PENDING / SCHILD CUTTER NO. 10 - - 9.5" metal cutter with hammer. Limited information I could find leads to a fire fighter's tool. Good++.

0488. Lot of Four: DASCO 399 combination tools with hammer, chisel and fencing staple or cotter key puller. 7.75" to 8.75". Excellent to Good.

0489. A. A. W. & S. CO (A. A. Woods & Sons Co.- Atlanta, GA) - - 3.75" spoke pointer. Some light pitting. (sell with Lot. 490)

0490. Unmarked - - 5.5" spoke pointer. Lip chip.(Sell with Lot 489)

0491. THE A. A. WOODS & SONS CO. (Atlanta, GA) - - 6.5" hollow auger with adjustable depth stop. Patented by Albert A. Wood - Manlius, NY on Aug. 10, 1875.  PAT

0492. Unmarked - - 6" hollow auger.

0493. The L. S. S. CO. - ATHOL, MASS. USA (L. S. Starrett Co) - - 12.5" cast level with three level bubbles and a groove on one edge for leveling pipes. Fancy cutouts

0494. Unmarked - - 7" wooden handled hand vise. Good++.

0495. PAT. JAN 2nd 94 - - 12" hoof nipper or trimmer. Patent was issued to William K. Fraley of Lebanon, Indiana. Good++.  PAT

0496. ROTARY CLINCH TONGS - PAT'D - DAVENPORT, IOWA - -15" farrier's horseshoe nail clincher tongs. Good++. (patent not found)

0497. COWELL THREADER - PAT 1910 - - 9.5" adjustable depth threading tool with eight dies (1/" to 3/4"). Good++. (patent not found)

0498. HAROLD FREEBORN - 124 GRIGGS ST. - ROCHESTER, MICH. - NOVEMBER 11 1970 - - 7.5" bronze and steel vise with rotating and tilting 2" jaws. No information on Harold Freeborn but he apparently was a machinist who made this extraordinary vise.

0499. Unmarked - - 4" diameter small jeweler's anvil.

PiCs Lots 485 thru 499

0500. CROMNA - ROSS 11 - 15-32 MM - 3/8" - 3/4" / - CROMNA BOLAGET TRELLEBORG - PAT No. 124144 - MADE IN SWEDEN - - 10" self adjusting wrench. Others seen marked Norway or Denmark. Excellent.

0501. 6 - 8- LAKESIDE - TOOL STEEL / LAKESIDE - FORGED - - 8" double ended Crescent type wrench (6 and 8 inch). Rare brand.. Lower jaw crack.

0502. 6 in - 8 in - DIAMOND CALK HORSESHOE CO . - DULUTH, MINN. with horseshoe logo / 6 in - 8 in - with DIAMOND logo and a horseshoe logo - - 6" double ended Crescent type wrench (6 and 8 inch). Good++.

0503. 4749 PLOMB (with arrow logos) / MADE IN USA - FC - - 5" 1/4" drive ratchet. Good++.

0504. 8" UNIVERSAL. (etc.) / UNIVERSAL WRENCH CO. - DETROIT - WINDSOR - PATENTED 6-3-19 - 7-22-19 - - 8" Crescent type with a lever to release the adjusting jaw to allow for a ratcheting action. A United States patent was granted June 3, 1919 and a Canadian patent on July 22, 1919 to Roland John Statham of Vancouver, British Columbia Canada. Good++. (S530T)  PAT

0505. 6" PLIER WRENCH - PAT'D MAR 7, 1922 / PUYALLUP, WASH. (only part of Puyallup is readable) - - 6.5" quick adjust plier type wrench. Patented by William T. Long of Puyallup, Wash. Good+. (S246, C339)  PAT

0506. ACME (in a diamond logo) PAT FEB 27, 83 - - 5" pre Whitman & Barnes Acme twist handle wrench. Good++ with most of the original plating.

0507. THE BILLINGS & SPENCER - HARTFORD, CONN. USA / TREATED STEEL FORGING - 6 IN ("B" in a triangle logo) - - 6" curved handle Crescent type adjustable wrench. Excellent with original finish.

0508. Lot of Three: Bemis & Call Curved Handle Crescent Type Wrenches. One 10 inch 48A (closed handle) has FORD (in script) stamped on top jaw, Ford factory tool? and two 8 inch with open handles.

0509. Lot of Two: Keystone Mfg. Co. Westcott curved handle Crescent type wrenches. One 12 inch No. 81 (has "CANADDY STEAM PLANT" etched in top jaw) and one 8 inch No. 78.

0510. W. SCHOLLHORN CO. NEW HAVEN, CONN / BERNARD'S PAT. JULY 19, 1892 - SEPT. 25, 1894 - - 9" fencing pliers with wire cutter and hammer. Good++.. (Smith 67)

0511. Lot of Three: Specialty Pliers
(1.) H. BOKER & CO.- MADE IN USA - - 9" adjustable pliers with circular grooved jaws. (no info found)
(2.) VACUUM GRIP - NEWPORT, PA. USA (Forged Steel Products) - - 7.5" specialty pliers with circular grooved jaws servicing the valve covers on Indian motorcycles. Forged Steel Products was acquired by Snap-On in 1945. Excellent.
(3.) RED DEVIL 444-7-1/2 GIANT GRIP PAT APPLD FOR - - 7.75" different looking heavy duty slip joint pliers with extra wide jaws. The Smith & Hemenway Company produced the Red Devil line of tools and were purchased by the Crescent Tool Company in 1926. Good+.

0512. Lot of Five: Four Misc. Wrenches and One Screwdriver
(1.) P. S. & W. TOOLS (Peck, Stow & Wilcox) - SOLID BAR - PAT JAN 14, 1896 - - 6.5" monkey wrench with knife type handles. Good++.
(2.) Unmarked - - 5.5" screw adjust bike wrench with hanging knurl adjustment. Good+.
(3.) CRESCENT TOOL CO. - - 6" adjustable wrench. Good++.
(4.) 5 IN. AUTO / Vlchek logo - - 5.25" automotive type adjustable wrench. Rare size in Good++ condition.
(5.) Unmarked - - 5.5" Perfect Handle type screwdriver. Excellent.

PiCs Lots 500 thru 512

0513. DIAMOND TOOL & HORSESHOE CO - 18 IN. -FORGED STEEL - HEAT TREATED (with horse shoe logo) / DIAMOND - DULUTH, MONN. - MADE IN USA - - 18" automotive type adjusting wrench. Heavy duty version. Good++.

0514. DIAMOND C718 FORGED USA (with horse shoe logo) . NO EXTENSIONS - -18" automotive type adjusting wrench. Excellent..

0515. DIAMOND CALK HORSESHOE CO - 12 IN. / DIAMOND - DULUTH, MONN. - MADE IN USA - - 12" automotive type adjusting wrench. Squared head with hammer style. Excellent.

0516. SCHICK QUICK-GRIP - PATENT PENDING - 704 - 1-1/2 - - 15" aluminum alligator wrench with steel jaw inserts. Excellent. (not in Schulz, patent not found)

0517. 8" OLIVER - FORGED USA / PAT. PEND. MFD. BY L. HENGY - DETROIT, MICH - - 9" all metal self adjust pipe wrench with roller type lower jaw. Excellent except the bolt that holds the roller jaw in place looks like a replacement. (S341, patent not found)

0518. G. M. CO. - L. I. CITY, NY. / MADE IN USA - UNBREAKABLE - - 8.5" cast combination tool quick and screw adjust nut wrench with alligator wrench, hammer, pry bar and nail puller. Design patent was issued to George Iskyan of Jackson Heights, NY on 9-7-1954. Excellent except end of the handle is bent (but as it is "unbreakable" it didn't break) with original plating. (S791)  PAT

0519. 8 IN NUT GEARENCH (sic) TRADE MARK - FORGED STEEL - PATENTED 6-2-26 / GEARENCH MFG CO. - HOUSTON TEXAS - - 8.25" quick adjust wrench patented by Joseph Peterson of College Station, Texas. Marked with patent date variation. Excellent. (S671)  PAT

0520. HOMMEL (with a duck? and a "H" logo) - D.R.G.M - STAHL GESCHMIEDET - - 10" heavy twin jawed turn handle to adjust nut wrench. Good+.

0521. KONGSSBERG NO. 91 / MADE IN NORWAY - - 11.25" all metal plier type wrench with threaded shaft and knurled adjusting nut. Excellent. (not listed, no info found but looks similar to Swedish Bahco wrench S781)

0522. LARCO PAT-9-21 - "LARCO" - CHICAGO USA - - 10,5" all metal screw adjust pipe wrench. Marked with patent date rather than Pat Pending variation. Patented 9-6-1921 by Charles A. Dies of Chicago, Illinois. Good++. (S608)  PAT

0523. KEEN KUTTER (with Keen Kutter logo) / DROP FORGED - - 11" all metal Stetson type pipe wrench. Good++ except for minor lip chip.

0524. WHITMAN & BARNES MFG. CO. - PAT. MAY 19, 1891 - MADE IN USA - (W & B logo) - - 9.25" all metal screw adjust pipe wrench with reversible jaw insert.. Paten was granted to Frank S. Cook of Chicago, IL. Good++.  PAT

0525. Marked only GERMANY - - 7.5" wooden handled screw adjust pipe wrench. Good++.

0526. COCHRAN 14 IN. - PAT'D 1908 / MODEL 1910 (with an odd logo) - - 13" Modified Stillson type with a patented "rocking collar". The patent was issued to James M. Cochran of Paducah on April 21, 1908. Good++ with some minor damage to jaw serrations. (S588) PAT

PiCs Lots 513 thru 526

0527. THE H. D. SMITH & CO. - 18 IN. / PERFECT HANDLE - PATENTED - - 18" screw adjust pipe wrench with wood knife type slab handles. Good+.

0528. SEMPER IDEM STEEL WRENCH 15" / S (in a circle) TRADE MARK - - 15" H. D. Smith all metal monkey wrench with patterned handle. Good.

0529. W & B logo (Whitman & Barnes) - MADE IN USA - PAT. APR. 19, 98 - - 7.5" screw adjust nut wrench with wooden slab knife type handles with reversible jaw inserts Patent was granted to Henry J. Martin of Chicago, IL. Handle crack, lip chip.. PAT

0530. SCHAFF - CHICAGO - - 11.25" wooden handled piano turners hammer wrench with eight point socket. Good++. (similar to S896)

0531. Lot of Three: Turn Handle Adjustable Wrenches
(1.) XCEL SOCKET WRENCH MFD BY PARK METALWARE CO. ORCHARD PARK, NY - PATENTED - - 10" turn handle adjustable socket nut wrench with two sockets. Patent issued to John Zilliox of Orchard Park, NY on Aug. 23, 1927. Good+ with weak markings, not all readable. (S69)  PAT
(2.) Can't read markings - - 7.75" Xcel turn handle adjustable socket nut wrench with two sockets.
(3.) Unmarked - - 6" turn handle adjustable socket nut wrench with two sockets. Smallest of this type wrench I have seen. Pitted.

0532. THE CADY / PAT. NOV. 1, 92 - - 13.5" cast carpet stretcher. Patented by Horace G. Cady of Scott, New York. Good+ but board with spikes is missing. PAT

0533. D. V. BRINNON (may be an owner's mark?) - - 13.5" heavy cast primitive ratchet with 7.5" extension marked "625-1/2". Good++.

0534. BILLMONT MASTER WRENCH "THE WRENCH THAT SPINS 'EM OFFF" (label on wooden box) - - 14.25" wooden box with one Billmont Master Socket Wrench, four extra sockets, turning rod and instruction sheet. Good++.

0535. Lot of Four: Ratchet Wrenches
(1.) Unmarked - - 9".
(2.) OHIO (in an oval logo) / A - - 7" square female drive ratchet with an open ended wrench on the other end. First one I have seen complete. Pitted.
(3.) HINSDALE - PAT. PEND. - MADE IN USA - H-1 - - 9".
(4.) BONNEY RF25 / BONNEY USA - - 6" refrigeration ratchet Good+.

0536. RACINE GEN'L MFG. CO. / PAT'D RACINE, WIS. - - 8" odd double headed female drive ratchet wrench with angled heads. Rare and different in Good++ condition. (C256, patent not found)

0537. DEMUTH STEEL PRODUCTS CO. CHICAGO - - 13.5" cast ratchet with female hex drive. Patent was issued to Gordon K. Wright of Hinsdale, Illinois on Mar. 10, 1914. Excellent. (R2-78)  PAT

0538. LITTLE GIANT - 18" - PATENTED FEB-4-1913 / GREENFIELD, MASS. USA (with a GTD logo) - - 18.25" pipe wrench with four way jaws. Patented by Addison B. Carll of Boothwyn, Penn. (he also had the patent for the Carll reversible jaw Crescent type wrenches). Some dings.. (S600)  PAT

0539. AMPCO W213 18 / MADE IN USA - - 16.75" Aluminum-Bronze adjustable pipe wrench. Excellent (new price $246.03)

0540. SCHICK - 718 7/8 - 11/16 - - 8.75" Aluminum-Bronze or Beryllium-Copper double open ended wrench. Excellent.

PiCs Lots 527 thru 540

John Deere and Related Companies Wrenches - Part One (lots 541 thru 580)

0541. JOHN DEERE (B353R) - -15.5" Flat shaft, double twelve point box end variant. Excellent with new paint. (D249)

0542. Unmarked (Deere No. AR-58 - Holt Safety Clutch Wrench) - - 15" flat steel double hex wrench. Only one owner shown on Dill's List. Excellent. (D229)

0543. John Deere / 1340SC - 9" Pitted, new paint. (D81)

0544. 148 (Syracuse Chilled Plow / Deere) - - 9.5". Good++. (D25, R1-448)

0545. DAIN MFG CO / OTTUMWA IA. (Dain J81E, later John Deere) - - 9.75". Large letters variant. One jaw is missing as often found. (D350)

0546. 127706 HOLT (Holt combine later John Deere) - - 10" double extended socket, Rare, only two shown on Dill's owner's list. Good+. (D142)

0547. 1C1981 with horizontal "T" logo (Deere Combine) - - 9.5". Rare. Good++. (D114)

0548. A124 / Z (Deere) - - 4.25" tee wrench, numbered across head, no holes with "Z" variation. Good++. (similar to D151)

0549. A124 (Deere) - - 4.25" tee wrench, numbered across head with no holes variation. Good++. (D151)

0550. DEERE & CO / M123 - - 11" with hammer head. Good+ with mushrooming on hammer head, painted. (D424)

0551. DEERE & MANSUR CO / S51 - U - - 10.25" with screwdriver end. Some pitting. (D514)

0552. 136 (Deere) / N - - 10". Round holes variant. Good+. (D20)

0553. DEERE & MANSUR CO / 157 - - 10.25" with six openings and screwdriver end. Pitting under new paint. (D29)

0554. UNION MAL IRON CO (Union Malleable Iron Co. - Moline, ILL. later John Deere) - - 10.25". John Deere purchased Union Malleable iron Co. in 1911. Pitting. (D616, R1-465)

0555. Marked only "A" (Kemp & Burpee Mfg. Co. - Syracuse, NY / Deere) - 10.25". Pitted, weak markings. (D146)

0556. S26 08D - MOTOR WHEEL - 05164 - 3/4 HEX (Deere A5278DU) - - 16.5" lug wrench for John Deere Wagons. Not marked "MADE IN USA" variant". Excellent. (D193)

0557. Dain (John Deere) / Z78 - D - - 6.5" pitman wrench. Good+. (D561)

0558. SC25 (Syracuse Chilled Plow Co. / Deere) - - 6.5" with angled square opening variation. Excellent. (D530)

0559. JOHN DEERE - - 10" wood handled monkey wrench. Poor, painted. (D598)

0560. DEERE & CO (HZ5061) - - 8" wood handled monkey wrench, slotted adjusting knob variation. Good with handle cracks, new paint. (D341)

PiCs Lots 541 thru 560

0561. JOHN DEERE (B353R) - -15.5" Flat shaft, six and twelve point box ends variant. Excellent with new paint. (D248)

0562. 22509 JOHN DEERE / JOHN DEERE - - 16". Some pitting. (D134)

0563. 154 (Syracuse Chilled Plow / Deere) - - 15" with hammer head. Some dings. (D27)

0564. JOHN DEERE (B352R) - - 12". Flat shaft with double hex box ends. Good++. (D245)

0565. D & M Co. (Deere & Mansur) / B470 - - 13". Shows pitting under new black paint. (D252)

0566. Unmarked (Z152 Deere Hoover Potato Digger Wrench) - - 9.75" flat steel. None shown on Dill's Owner's List. Good++ with minor dings.(D566)

0567. 246 with a "M" logo (Marseilles Mfg. Co - Marseilles, ILL. / Deere) - 12.5" tee wrench. Good++. (D51)

0568. JOHN DEERE TY3278 USA - - 6.25" needle nose pliers. Good++.

0569. 8 IN - JOHN DEERE TY3218 USA - - 8" Crescent type adjustable wrench. Excellent with former owner's ID "87" scratched on jaw.

0570. 8 IN - JOHN DEERE TY3218 USA - - 8" Crescent type adjustable wrench. Some areas with corrosion.

0571. JOHN DEERE TY3758 USA - - 8" slip joint pliers. Excellent, light markings.

0572. John Deere TY3311 USA - - 14" ball peen hammer. Excellent.

0573. JOHN DEERE TY3232 (with deer logo) - - 12.75" - 15/16" combination box end and open end wrench. Good++.

0574. JOHN DEERE TY3516 (with deer logo) - - 14" - 1" combination box end and open end wrench. Good++.

0575. Unmarked (1819R Waterloo Boy and John Deere) - - 9" extended socket for Waterloo Boy and first John Deere "D" tractor cylinder head bolts. Good++, over cleaned. (D84)

0576. Unmarked (Deere C1591R) - - 2.25" socket. Excellent with new paint. (D275)

0577. G675A with JD logo - - 8" plow clevis. Shows wear, new paint.

0578. Unmarked (John Deere M3420T Wheel Wrench) - - 20.5". Excellent. D455)

0579. DEERE & CO (HZ5061) - - 8" wood handled monkey wrench, slotted adjusting knob variation. Good with dings, handle cracks. (D341)

0580. OTC JDE37A - 04-112-8 (Ottawanna Tool Co. for John Deere) - - 6.75" offset box end by 1/2" drive adapter. John Deere service wrench for getting around the rocker arm assembly when torquing head bolts. Excellent.

PiCs Lots 561 thru 580

International Harvester and Related Companies Wrenches (lots 581 thru 601)

0581. M451D (IHC logo) - - 18.5" threshing machine cylinder wrench and tooth straightener. Excellent, painted. (R1-254)

0582. P459 / OSBORNE (later IHC) - - 14.5" extended double socket. Good+ with casting flaw.

0583. Marked AMERICAN BOSCH MAGNETO CORP. MADE IN USA with a Bosch logo (on the wrench) and SPARKPLUGS (on the gauge) (IHC No. 17601D) - - 3.5" magneto wrench and sparkplug feeler gauge. Good++.

0584. D / IHC logo (IHC earlier Keystone Co, Sterling, Illinois) - - 8.5". Rarer variation with the IHC logo. Excellent.. (R1-280)

0585. C (Keystone Co, Sterling, Illinois, later IHC) - - 7.5". Good+ with light pitting. (R1-280)

0586. GA246 (IHC) - - 9.75" piston socket wrench. No IHC logo variant. Good+ with some end hammer damage. (R1-253)

0587. 9118 with IHC logo - - 7" by 7.5" tee handled socket wrench. Good++.

0588. Marked 6852H and 6853H (IHC) - - 9" cast valve lifter. Markings are for the two parts. Complete tool number is 6851H. Good++.

0589. 632LA / (IHC logo) - - 4.5" socket with lip near socket opening variant. Excellent with blue paint.

0590. 139 1/2E (IHC) - - 5" by 6.5" tee socket wrench for circa 1907 IHC auto buggies, trucks.. Good+. (R1-250)

0591. F8121 - IHC logo - - 7" double square socket wrench, stud at 90° and number raised on shaft and logo indented on large socket end variant. Good+.

0592. L320 / PATENT PENDING (Plano Mfg. Co. - Plano, Illinois / Later IHC) - - 8" malleable screw adjustable with hammer head and an open end wrench on end of handle. No logo variation. Lower part only, missing top part and adjusting nut.. Good+. (R1-381)

0593. IHC - 14327-L - 207 - WILLIAMS - FORGED IN USA - XT / HARDNED - 1-1/16 - - 16.75" spud or construction wrench. Good+ with some grind marks on jaws. (R1-252)

0594. D138 (Chattanooga Plow Co. / IHC / David Bradley) - - 12.75". Disk straightening slot at 90°. Good++, some hammer damage on hammer poll.

0595. D138N (Chattanooga Plow Co. / IHC / David Bradley) - - 12.5". Good++, painted. (R1-99. R1-252)

0596. 1725V with IHC logo - - 7.75" large cast socket. Excellent, painted. (R1-251)

0597. CHAMPION No. 175 (IHC?) - - 7.25" with six different openings and 7/16" square stud (larger stud variation). Good++. (Listed in Gil Irps' list, not pictured in Rathbone)

0598. CHAMPION No. 175 (IHC?) - - 7.25" with six different openings and 3/8" square stud. (smaller stud variation) Good++. (Listed in Gil Irps' list, not pictured in Rathbone)

0599. KENTUCKY DRILLS / KR299 - Brennan & Co. Lou. KY (also IHC and American Seeding Co.) - - 8.75". Good++ with poor casting on numbers. (R1-62)

0600. CHATTANOOGA 5 (later IHC) - - 9.5". Pitting, painted, two small drilled hang holes. (R1-98)

0601. Lot of Two: IHC Hubcap Wrenches
(1.) 22394VA (IHC logo) - - 8.5" hubcap wrench for early IHC trucks. Good+. (R1-252)
(2.) Unmarked (IHC 22394V) - - 9.75" stamped steel hubcap wrench. Good++.

0602. P1184 (IHC logo) (IHC, originally Osborne) - - 9.5" by 11.75" Tee socket wrench. Good++ except for some end hammer damage.

0603. Lot of Four: International Harvester Wrenches
(1.) 10466CX (IHC logo) - - 8,75" cream separator wrench. Spanner pegs have been repaired. (R1-256)
(2.) F8121 - IHC logo - - 7" double square socket wrench, stud at 90° and number raised on shaft and logo indented on large socket end variant. Good++. painted.
(3.) Unmarked 950(McCormick / later IHC) - - 10". Pitted.
(4.) 2156 with B. F. Avery cross logo (Champion later IHC later B. F. Avery ) - - 7.5". Good++, painted. (R1-27)

PiCs Lots 581 thru 603

0604. 6" COCHRAN SPEEDNUT WRENCH - TRADEMARK - REG. U. S PAT. OFF./ PAT. PENDING - 6" self adjust nut wrench. Design patent was issued to Walter W. Taylor, Chicago, ILL. on MAY 2, 1916. Scarce small size without patent date variation. Good++. (similar to S320, C283)  PAT

0605. WEBB & HILDRETH CO / PAT. FEB. 6, 06 - DEC. 17, O7 - - 11". Self adjust wrench with serrated jaw inserts for pipe or nuts. Mfg. in Gloversville, New York and patented by William Webb and Warnie Hildreth of Gloversville. .Light pitting, zealously cleaned. (S1069)  PAT and  PAT

0606. ENDEAVOR - - 6.5" self adjusting wrench with a plastic or hard rubber handle covering. Excellent.

0607. INSTANT-GRIP - WESTERN GERMANY - - 7.5" self adjusting wrench with one serrated jaw. Good++.

0608. HASTEE 8" / Label marked: HASTEE - 8 - US PATENT 3,803,954 - DAVENPORT TOOL CO. - ELDRIDGE, IA - - 8" self adjusting wrench. Patent was issued to Paul E. Lenker of Davenport, Iowa on Apr. 16, 1974. Excellent. (S321)  PAT

0609. HASTEE 8" DAVENPORT TOOL CO - US PATENT 3,803,954 - - 8" self adjusting wrench. Marking variation of Lot 608 above. Excellent. (S321)  PAT

0610. RAPID-GRIP 10 / TANGUY TOOL CO. - GLEN MILLS, PA 19342 - PATENT 3101018. - - 10" self adjusting wrench with plastic handle covering. Patented by Alfred F. Andersen of Glen Mills, Penn. on Aug. 20, 1963. Good+.  PAT

0611. Lot of Two: 9" self adjusting wrenches - COCHRAN SPEEDNUT WRENCH - One marked PAT. PENDING - - Other one marked PAT. MAY 2, 1916. Design patent was issued to Walter Taylor of Chicago, Illinois. (S320m, C96)  PAT

0612. Lot of Two: Westcott Curved Handled Crescent Type Adjustable Wrenches with Pipe Jaws
(1.) WESTCOTT - THE KEYSTONE MFG. CO. / 10 INCH NO, 80 - BUFFALO, NY USA - - 10.25" solid handle variant with pipe jaws on adjustable jaw. Good+.
(2.) WESTCOTT / 10 IN PIPE - THE KEYSTONE MFG CO BUFFALO NY - - 10.25" open handle variant with pipe jaw insert on the non-adjustable jaw. Good+.

0613. ANY ANGLE WRENCH - PATENT 1916 - LIMA., O. USA / DROP FORGED STEEL - - 8.5" Crescent type adjustable wrench with an adjustable angle head. Mfg. by Atco Wrench Co. and patented by Ramson Bovee 11-21-1916. Good+. (S311)  PAT

0614. 94-6 UTICA SELECT-O-LOCK PATD / FORGED ALLOY STEEL USA - - 6" Crescent type adjustable wrench with a lever that presses against the adjusting gear and locks the jaws in place. Note: Patents have been found for two different types of Utica's locking Crescent types but not this type. Excellent. (not listed, patent not found)

0615. 10" STANLEY / 85-610 PAT 4472986 - CHINA - - 10" Crescent type with a lever that tightens and locks the jaws and another that releases the jaws. Patented by Robert G. Gottlieb of Overland Park, Kansas. Excellent, like new .  PAT

0616. 10 INCH - BESSEY - US PAT 2765690 (etc.) / NO. 111-3 - MADE IN W. GERMANY (etc.) - - 9.75" Crescent type with ratcheting action. Patent issued to Eugen Mayer of Stuttgart, Germany on Oct. 09, 1956. Good++. (S770)  PAT

0617. LACHEZE (with lion logo) - - 12" Crescent type with offset, curved handle. Good++. (like S758)

0618. 8" CYGNET WRENCH / CYGNET MFG. CO. INC. - BUFFALO, NEW YORK - PATENTED - - 8" Crescent type with a pivoting head that allows the jaws to ratchet. Patented by Henry D. Rahling of Buffalo, NY on Oct. 2, 1923. Good+. (S468)  PAT

0619. 8" UNIVERSAL. (etc.) / UNIVERSAL WRENCH CO. - DETROIT - WINDSOR - PATENTED 6-3-19 - 7-22-19 - - 8" Crescent type with a lever to release the adjusting jaw to allow for a ratcheting action. A United States patent was granted June 3, 1919 and a Canadian patent on July 22, 1919 to Roland John Statham of Vancouver, British Columbia Canada. Good+ with some spots of corrosion. (S530T)  PAT

0620. MAC -AJ-12 - PATR. APL'D. FOR (MAC TOOLS - Westerville, Ohio) / FORGED ALLOY STEEL - -12" Crescent type with a lever that locks the adjusting gear. Excellent.

0621. Lot of Two: CARLL / PAT'D MAY 6-13 - - 6" and 10" Crescent type adjustable wrenches with reversible jaws for nuts or pipe Patented by A. B. Carll of Boothwyn, Penn. 6" is Good and 10" is Good+. (S568)  PAT

0622. Lot of Two: Crescent Type Adjustable Wrenches
(1.) Marked only GERMANY - - 10" with geometric shaped cutouts in the handle. Good+ with some edge dings.
(2.) Unmarked - - 10" with oval cutout in handle. Excellent.

0623. GORDON AUTOMATIC PATENT APPLIED FOR (same markings both sides) - - 8" curved handle Crescent type with an attachment to the adjusting gear that releases the moveable jaw. Patented Jul. 22, 1924 by William Gordon of Union, New Jersey. Good++. (S492)  PAT

0624. 8 IN. CRESTOLOY - PAT. PEND. - MADE IN USA / MFD. BY CRESCENT TOOL CO. - JAMESTOWN, NY - - 8" adjustable wrench with a adjusting gear lock. Excellent.

0625. UNIVERSAL WRENCH CO. / STERLING, ILL - PAT 9 5 11 - - 9.25" Crescent type with locking pivoting jaw head. Patented by Ransom Bovee of Denver, Colorado on 9-5-1911. Good++. (like S318, C310)  PAT

0626. Marked only STAINLESS 0 CHINA - - 5,25" pocket knife mult-tool with Crescent type adjusting wrench, two screwdrivers, scissors, bottle opener and one knife blade. Excellent.

0627. VOLVO - AB BACCO - STOCKHOLM / V-STEEL - 8" BAHCO 31 - MADE IN SWEDEN - - 8" Crescent type wrench with alligator wrench on end. Good++.

0628. FINN TOOL CO. - SPRINGFIELD, ILL -ALLOY STEEL (same marking both sides) - - 10" Crescent type with a lever that can be used to turn the adjusting nut (for more leverage in tightening the jaws). Patent was granted to Kenneth F. Finn of Omaha, Nebraska on Nov. 03, 1953. Excellent. (not listed)  PAT

0629. KLEIN TOOLS INC 3239 - USA - - 16" pointed end construction (or spud) alignment wrench with Crescent type head. Excellent..

PiCs Lots 604 thru 629

Big Boy Wrenches (definitely not pocket watch wrenches) (lots 630 thru 642)

0630. PAT. OCT 20. 1903 - MADE BY COES WRENCH CO (marked on the upper jaw) - TRADEMARK KEY MODEL with a skeleton key logo (marked on handle shaft) - - 72" Coes largest Key Model adjustable wrench. Patented by Loring Coes of Worcester, Mass, (Loring Coes last wrench patent).  PAT
PiC Coes Key Wrench #1 - - PiC Coes Key Wrench #2 - - PiC Coes Key Wrench #3 - - PiC Coes Key Wrench #4

The rest of the story: I never dreamed that I would have the opportunity to sell one these mammoth wrenches but they all changed when I got a call from British Columbia from a collector who had just purchased one from a retired bridge contractor. After a few more phone calls he consented to let us sell it on this auction. It arrived in a 53" Roadway semi-trailer and with help from the driver slid it from the trailer into my van. When I got home I took it out of it's crate and slid it onto a dolly and wheeled it under our carport where I took the photos.

This is only the second 72" Coes Key Wrench that have been discovered by collectors. For years rumors of one residing somewhere in New England floated around tools shows till Herb Page author of "The Brother Coes and Their Wrench Legacy of Wrenches" tracked it down and after a couple years and two trips from the Midwest to the East Coast managed to purchase the only one known at the time. It had came out of one of the offices of Billings & Spencer when they closed and had evidently never been sold and was passed from The Coes Wrench Company to Bemis & Call to Billings & Spencer as The Coes Wrench Company changed owners. Herb later put on his best suit and had a photograph taken of him standing beside the wrench like the iconic photo of Frank Coes standing by one with a "Baby Coes between the jaws, I wonder if they are photos of the same wrench? According to advertisements announcing the new 72" size to their 28". 36" and 48" Key Wrenches it was a special order item that was intended mainly for bridge builders. According to the announcement the jaws weighed 33-1/2 pounds; adjusting screw, 5-1/2 pounds; strap, 8-1/2 pound; key, 4-1/2 pounds and bar, 114 pounds for a total of 166 pounds! It was advertised by Coes as "probably the largest adjustable wrench ever made".

This wrench maybe the only remaining example of one that was actually sold. The previous owner said he never used the wrench and he doubted that it was ever used and it doesn't show any signs of use with no dings around the jaw edges which usage usually causes. A beautiful impressive wrench with dark patina and no defects. The only thing that I should mention is that at one time parts were painted with a reddish brown paint (probably for owner's identification) and there is some paint residue left. This really doesn't distract from the appearance and could easily be removed if desired.

The markings on this one are different than the one Herb Page owned. His was only marked "PAT. OCT 20. 1903 - MADE BY COES WRENCH CO " on the shaft. This one has those markings on the upper jaw and is also marked "TRADEMARK KEY MODEL" with their skeleton key logo on the shaft.

A once in a life time opportunity to own one of the largest, rarest, most impressive and most desirable of all collectible wrenches. I usually don't include an expected price but I have had several inquires as to the hammer price of this one. Herb Page valued it at $12.500 in his 2005 Price Guide in his Coes book. Four of the twelve or thirteen know examples of the John Deere TR590 cutout wrenches have sold in the last few years between $10,000 (with a broken letter) and $20,000 and this wrench is about six times rarer than the TR590. Have fun bidding and Good Luck.

0631. PAT. OCT 20. 1903 - MADE BY COES WRENCH CO (marked on the upper jaw) - TRADEMARK KEY MODEL with a skeleton key logo (marked on handle shaft) - - 32" (advertised as the 28" size). Coes smallest Key Model adjustable wrench. Good+. Jaws slightly sprung, tight crack on lower jaws beside the adjusting screw. (HP60)  PAT

0632. LOWELL WRENCH CO. - WORCESTER, MASS. - 19204 - B6194059 - 37038 / J-17-23 - NO. 47 SPEC. - - 62" ratchet wrench with female hex. Army Surplus New Old Stock in the original shipping crate marked "From: Lowell Corporation - 97 Temple ST - Worcester, Mass. and "To: Transportation Officer - Red River Army Depot - Texarkana, Texas". Excellent, like new with original Olive Drab paint.

PiCs Lot 632

0633. ATLAS - 36 - PAT. 1888 - - 36" adjustable pipe wrench with a moveable upper jaw that can be adjusted to three different positions. Patented May 15, 1888 by Robert Copland of Eureka, Calif. and made in San Francisco, Calif. and New York, NY. Rare large size. Good++. (S655)  PAT

0634. ATLAS - 24 - PAT. 1888 - - 23" adjustable pipe wrench. Rare 24" size in Excellent condition.  PAT

0635. ATLAS - 18 - PAT. 1888 - - 17" adjustable pipe wrench. Light pitting.  PAT

0636. Lot of Two: Atlas Adjustable Pipe Wrenches  PAT
(1.) ATLAS - 10 - PAT. 1888 - - 10.5". Smallest size Atlas Pipe wrench? Good++.
(2.) ATLAS - 18 - PAT. 1888 - - 15".Missing the top jaw assembly. Good for parts if you have an extra top jaw.

0637. 15" TRIG-O-MATIC - PAT 2645145 / TRIG-O-MATIC TOOL CORP. - CHICAGO USA - - 17.25" self adjusting pipe wrench with a spring loaded pivoting upper jaw. Patented by John Larson of Chicago. Excellent, like new with original finish. (S720)  PAT

0638. OTC - OWATONNA TOOL CO. - OWATONNA, MINN. - 0A-24 - PAT. PEND. - MAX. 2-7/8 / H74 - - 23" hugh wrench with jaws that can be adjusted by placing a bolt in one of eight different holes. Good+. (S518)

0639. COMO WRENCH CO. - CHICAGO - U.S.A. / DROP FORGED - - 18" unique screw adjust pipe wrench consisting of only three parts with a slotted threaded upper jaw that fits over the wrench handle. Patented by Joseph Anthony Schlehr of Chicago on Oct. 14, 1913. Pitted. (S589)  PAT

0640. COMO WRENCH CO. - ROCKFORD - U.S.A. / DROP FORGED - - 24" large screw adjust pipe wrench. The longest we have had to sell. Pitted, painted. (S589)  PAT

0641. M. M. BUCK MFG. CO. (St. Louis, Missouri) - NO 4 1/4 TO 2 - COCHRAN'S PAT. OCT. 16, 94 - - 14" Pat. by James M. Cochran of Jackson, Tennessee. An odd alligator type wrench in a hard to find size. First one I have seen in this large size. Pitting, over cleaned. (S665, C80)  PAT

0642. FAVORITE REVERSIBLE RATCHET WRENCH - NO. C / PATENTED GREENE, TWEED & CO. MNFRS. N.Y. - - 27" malleable double headed ratchet wrench with 1-1/8" and 1-1/4" hex sockets. Good++, painted. (S148)

PiCs Lots 633 thru 642

0643. Unmarked - - 21.5" Whitman & Barnes Acme all metal twisted handled screw adjust wrench, heavy railroad version with the hex adjusting nut. Patented on Feb. 27, 1883 by Frederick B. Seymour of Detroit, Mich. First one we have had to auction in the rare 21" size. Good++, with lip chip and minor hammer head mushrooming.  PAT

0644. Lot of Two: Small Adjustable Wrenches
(1.) PATENTED APRIL 23, 1889 - FEB 10, 1891 - - 7" all metal pipe wrench with a rotating center section that allows the upper jaw to be inserted vertically or horizontally. Patents issued to Sidney Cook and Phineas Lownes. Mfg. by the Lownes Mfg. Co of Huntsville, Alabama. Good+ with weak markings. former owner's stamped initials "T. J. C.". (S612)  PAT
(2.) HOE CORP.- POUGHKEEPSIE, NY / Patented Feb 21 - 1922 - 6 - - 6.5" wood handled self adjust wrench with spring loaded jaw. Patented by Frederic Robert of Lynnbrook, Long Island, NY. Scarce wood handled variant. Areas of pitting, handle chips. (S361)  PAT

0645. GRIPLOCK PLIER WRENCH - PAT'D 1-22-24 - OTHER PAT. PEND.- NORFOLK, NEBRASKA USA - - 8.5" long nose version of the Griplock Plier Wrench. Patented Jan. 05, 1926 by William Tull and Roy Bristol both of Stanton, Nebraska (date on wrench is not the correct date). Good++. (S261T)  PAT

0646. Marked only PAT PEND - - 8.5" quick adjust nut wrench with a disk that slides in angled slots in the handle and lower jaw assembly. Good+ with light pitting. (S531)

0647. Marked only: "11" (David Bradley) - - 8" malleable cast sliding wedge adjust alligator wrench, smooth jawed nut wrench version. Pat 1-6-1891 by Theodore Vandegrift of Shelbyville, Indiana and mfg. by the Vandegrift Mfg. Co. of Shelbyville, Indiana. Listed in David Bradley Parts Lists. Good+ with broken spring. (S546)  PAT

0648. Marked only: "14" (David Bradley) - - 9.5" all malleable cast sliding wedge adjust alligator wrench, smooth jawed nut wrench version. Pat 1-6-1891 by Theodore Vandegrift of Shelbyville, Indiana and mfg. by the Vandegrift Mfg Co of Shelbyville, Indiana. Listed in David Bradley Farm Equipment Parts Lists. Good++. (S546)  PAT

0649. G. M. CO. - L. I. CITY, NY. / MADE IN USA - UNBREAKABLE - - 8.5" cast combination tool quick and screw adjust nut wrench with alligator wrench, hammer, pry bar and nail puller. Design patent was issued to George Iskyan of Jackson Heights, NY on 9-7-1954. (S791)  PAT

0650. MORGAN - ALBANY, WIS / PAT APPL'D FOR - - 7" sliding lower jaw rack type quick adjust, Good+. (S695, patent not found)

0651. Lot of Two:
(1.) LAKE SUPERIOR WRENCH CO - SAULT STE MARIE, MICHIGAN - PATENTED - - 6" self adjusting nut and pipe wrench. Patented 9-7-1909 by William Hilliard Munro of Sault Ste. Marie, Ontario, Canada and 10-4-1910 by John Boulieu of Sault Ste. Marie, Mich. Good+. (S362)  PAT  and   PAT
(2.) THE HEIDBRINK CO. / 10383 - - 8" open end by three stepped open end odd all metal wrench. (no info found)

0652. Lot of Two: GELLMAN WRENCH CORP. - ROCK ISLAND, ILL USA - POLLY quick adjust wrenches.  PAT
(1.) 11.75" external spring version. Good++.
(2.) 6" internal spring version. Good++.

0653. Unmarked - - 9.75" rack type quick adjust nut wrench. (not listed, no info found)

0654. LEVER WRENCH CO - DULUTH, MINN / HEIMBACK PATENT - - 10" quick adjust nut wrench with lever and rack teeth. Patented 6-8-1915 by Alton Heimbach of Duluth. Good+. (S308)  PAT

0655. Lot of Two:
(1.) NEVER-STALL - MATHEWS - DAYTON, OHIO / PATENTED - DROP FORGED STEEL - - 10.25" combination. tool with adjustable wrench, pliers, screwdriver, nail claw, hammer head, Etc. Set screw in upper jaw variation, Patented by Frank J. Stolle of Fort Thomas, Kentucky on Sep. 14, 1909. Made at various times by Mathews, Forshee Mfg, and Thomas Mfg. Co. all of Dayton, Ohio. Good with pitting. (Smith No. 81, S818, C213)  PAT
(2.) Same tool as above but the adjustable wrench part has been cut off.

0656. MYERS COMBINATION WRENCH MILWAUKEE WIS - - 8.5" quick adjust rack nut wrench with a lever for final tightening. Patented by William M. Myers of St. Joseph, Missouri, February 14, 1922. Excellent, best I have seen with most of the original plating but the spring under the tightening lever is missing or broken. (S560)  PAT

0657. HAYWARD / PAT. NOV. 4 - 1913 - - 11.25" self adjusting wrench with five different pivoting joints. Patent and mfg. by Hubert Hayward of Aldrich, Missouri and advertised as a bolt, nut, and pipe wrench. Good+ with some hammer dings around rivet heads. (S678, C162)  PAT

0658. POLLOCK'S "AUTOMATIC" PATENT PENDING - STEG. BRG. CO. - - 9.5" all metal rack type quick adjust nut and pipe wrench. Note: Different name on back side. Complete with the usually missing pipe jaw attachment. Good++. (S707, patent not found)

0659. Marked only PATENT APP' FOR - MADE IN USA / FORGED TOOL STEEL - - 9" Coes type all metal screw adjust nut wrench with an alligator wrench on the end Solid shaft variant\, probably the oldest version of John Morris' Economy Wrench patented Aug. 04, 1908. Good with hammer dings, former owner's punched initials "G. L.". (S40)  PAT

0660. KWIKSET - A. G. PIPE PAT SEP 7, 26 - - 12.5" quick adjust rack type pipe wrench with a lever that controls the upper jaw. Patented by Carl, Emil, and Sigfred Bjornson from Bentley, Alberta, Canada. The A. and G. stands for Joe Adams and Archie Grey of Marshalltown, Iowa. Good with some spots of corrosion, couple rack teeth are missing. (S686)  PAT

PiCs Lots 643 thru 660

0661. E. F. BARNES PATENT JAB 9, 1877 - MFD. BY M. E. FROG CO. - NEW HAVEN, CONN. - - 17" different adjustable tong-like wrench with a reversible lower jaw to allow use as either a pipe or nut wrench. Patented by Elbridge F. Barnes of New Haven, Conn. Good+. (S7325)

0662. COMO WRENCH CO. - PAT'D OCT. 14 - 13 - ROCKFORD ILL. / DROP FORGED - - 9.75" unique screw adjust pipe wrench consisting of only three parts. Patented by Joseph Anthony Schlehr of Chicago on Oct. 14, 1913. Good++. (S589)  PAT

0663. Unmarked - - 16.5 Foot Print type plier wrench. Good++.

0664. T & L CO. (Tower & Lyons?) - - 14" curved handle Crescent type adjustable wrench with the easy replaced adjusting gear feature. Restored.

0665. 14" MAGNUM TOOL CO - PAT PEND / MUESCO - HOUSTON TEXAS - - 13.5" self adjust wrench with a pivoting, spring loaded upper jaw that can be set to four different notches on the handle. Patented by Carlos V. St. Claire, San Bernardino, CA. Good++. (S335)  PAT

0666. RATCHET PIPE WRENCH / RP-070 JAWS 14 INCH - - 13." . Ratchet the handle to tighten the jaws. Excellent.

0667. COMO WRENCH CO. - ROCKFORD, ILL. - PAT'D OCT. 14 - 13 / DROP FORGED - - 12.75" screw adjust pipe wrench consisting of only three pieces Patented Oct. 14, 1913 by Joseph Anthony Schlehr of Chicago. Poor, pitted. (S589)  PAT

0668. Marked only PATENTED - - 12.5" sliding wedge adjust alligator wrench, smooth jawed nut wrench, wooden handle version. Pat 1-6-1891 by Theodore Vandegrift of Shelbyville, Indiana and mfg. by the Vandegrift Mfg Co of Shelbyville, Indiana. Good++, zealously cleaned. (C313)  PAT

0669. 14" MAGMUM PIPE WRENCH / MAGNUM TOOL CO - PAT PEND - - 13" self adjust wrench with a pivoting, spring loaded upper jaw that can be set to four different notches on the handle. Patented by Carlos V. St. Claire, San Bernardino, CA. Good++, painted. (S335)  PAT

0670. 14 CRAFTSMAN / MADE IN USA - - 13" screw adjust pipe wrench with patterned hand grip handle. Excellent.

0671. J1014 QUIK JAW / TOYANG - - 12.5" Ratchet adjust pipe wrench. Excellent, like new. (not listed, no info)

0672. Lot of Two: WALWORTH - PARMELEE No. 1 - PAT. 11-19-1907 - - 12" girdle type pipe wrenches with five segments for pipe sizes, 3/8", 1/2", 3/4" (2) and 1". Good++. (S133)  PAT

0673. Lot of Two: Ratchet Adjust Pipe Wrenches
(1.) J1010 JAWS / TOYANG - - 10" Excellent. (not listed, no info)
(2.) POWER JAWS - - 7.25". Excellent.

0674. PLATTINA No, 1003 / DROP FORGED STEEL - MADE IN GERMANY - - 12" self adjust nut wrench

0675. Lot of Two: Foot Print Type Adjustable Pliers type Wrenches
(1.) BAHCO - MADE IN SWEDEN / No. 124 - DROP FORGED STEEL - - 12". Excellent.
(2.) 9" KEYCO - THE KEYSTONE MFG. CO. - BUFFALO, NY USA - PAT APPL'D FOR - - 9" Rare to see this type wrench made in USA, first one we have had to list. Excellent.

0676. 12 IN TRIG-O-MATIC - PAT 2645145 / TRIG-O-MATIC TOOL CORP. - CHICAGO USA - - 14" self adjusting pipe wrench with a spring loaded pivoting upper jaw. Patented by John Larson of Chicago. Good++ with former owner's ID "W. Bonse Sr." (S720)  PAT

0677. INSTANT-GRIP - WESTERN GERMANY - - 10.5" self adjusting wrench with one serrated jaw. Good++.

0678. COMO WRENCH CO. - ROCKFORD, ILL. - PAT'D OCT. 14 - 13 / DROP FORGED - - 9.75" screw adjust pipe wrench consisting of only three pieces Patented Oct. 14, 1913 by Joseph Anthony Schlehr of Chicago. Excellent. (S589)  PAT

PiCs Lots 661 thru 678

0679. DIAMOND C718 - FORGED USA (with horse shoe logo) - - 18" automotive type adjusting wrench. Excellent, like new.

0680. Unmarked - - 12.5" rack type quick adjust pipe wrench with a wooden handle. Made by P. J. Biel Mfg. Co. of Terre Harte Indiana. Extremely rare, first one we have had to sell. Good with some dings, pitting, handle chips. (S660)

0681. AMERICAN SAW CO - TRENTON, N. J. / PATENTED SEPT 6, 1892 - - 16.5" all metal heavy duty center screw adjust pipe wrench advertised at various times as the Stevenson Wrench. the Star Wrench and the Triumph Wrench. Patented Sept. 6, 1892 by George Stevenson of Chicago, ILL. Good with jaw chip, minor dings, weak markings. (C39)  PAT

0682. Unmarked - - 15.25" simple two piece wrench with a hook on the bottom of the handle that can be inserted in four different holes on the other handle half for adjustment. Over all medium pitting. (S755)

0683. WRAFORGE - "TITAN" - MADE IN ENGLAND - PAT. APP. FOR - MADE IN ENGLAND - - 13.25" self adjust wrench. Good++. (not listed)

0684. LITTLE GIANT - 14" - PATENTED FEB-4-1913 / GREENFIELD, MASS. USA (with a GTD logo) - - 14" pipe wrench with four way jaws. Patented by Addison B. Carll of Boothwyn, Penn. (he also had the patent for the Carll reversible jaw Crescent type wrenches). Good+. (S600)  PAT

0685. Unmarked - - 6.25" quick adjust alligator wrench. Patented July 5, 1904 by William Cronk of Montour Falls, NY and mfg. by the Cronk and Carrier Co. of Elmira, NY. Good++. (S320)  PAT

0686. Unmarked - - 7.5" quick adjust alligator wrench. Patented July 5, 1904 by William Cronk of Montour Falls, NY and mfg. by the Cronk and Carrier Co. of Elmira, NY. Good++. (S320)  PAT

0687. Unmarked - - 8.5" quick adjust nut wrench with a disk that slides in angled slots in the handle and lower jaw assembly. Good with pitting. (S531)

0688. Unmarked - - 6.25" sliding wedge type quick adjust alligator wrench with hex box opening on the opposite end. Poor with pitting and replaced bolt and nut. (not listed)

0689. Lot of Three: Adjustable Wrenches
(1.) DIAMOND EDGE (with logo) SHAPLEIGH HARDWARE CO. - ST. LOUIS - - 10" monkey wrench with wooden knife slab type handle. Good with handle cracks.
(2.) No, 1 SELF ADJUSTING WRENCH - - 6.5" self adjusting wrench with serrated jaws. Excellent.
(3.) (USHCO logo) LAWSON - U. S. H. CO. Mfg Co. (U. S. Hame Co.) - Buffalo NY USA / DROP FORGED STEEL - Also marked S.L.S.F. RY. CO. (St. Louis San Francisco Railway Co.) - - 12.75" angled head pipe wrench. Patented was issued to Gottfrid C. Lawson of Cleveland on Dec. 14, 1920. Good++. (S609).  PAT

0690. Lot of Two: Starbuck Spud Wrenches ( R. M. Starbuck & Sons - Hartford, Conn.)
(1.) STARBUCK No. 735 - - 11" cast adjustable spud wrench. Excellent.
(2.) STARBUCK - - 13" cast hook spanner with open hex wrench. Good+. (R437)

0691. Lot of Two: Adjustable Internal Pipe Nipple Type Wrenches
(1.) STARBUCK (cast on handle) - - 8" all metal with cast handle. Patented Jan. 6, 1953 by Alfred L. Joy of West Hartford, Conn. and assigned to R. M. Starbuck & Sons of Hartford, Conn. Odd looking turn handle to adjust wrench that was designed that when the jaws are adjusted outwardly they engage internal surfaces. Good++. (S534)  PAT
(2.) Unmarked - - 7.5" adjustable wrench for internal use. Good++. (not listed)

0692. Unmarked - - 11.5" turn handle to adjust twin jawed nut wrench. Good+.

PiCs Lots 679 thru 692

0693. L. D. B. CO. PHILA. - - 10.25" cast combination tool. Maybe a pot and skillet lifter? I have seen this tool before but this is the first one I have seen with markings. Good+ with replaced pivot bolt and nut. (not listed, no info found)

0694. HOL-SET MFG. CORP. - ROCHESTER, NY. - PAT APPL'D FOR - - 19.25" speed type socket driver with five sockets on the hex shaft. Patented Mar. 13, 1928 by Joseph J. Judge of Rochester, NY. Good+.  PAT

0695. P. LOWENTRAUT - NEWARK, NJ / TERRITORIES FOR SALE BY S. J. JOHNSTON, LEESBURG, VA - PAT. DEC 4, 1894. - - 13.5" combination adjustable monkey wrench and bit brace. Patented by Samuel J. Johnston of Leesburg, Virginia. Good+. (S55)  PAT

0696. P. LOWENTRAUT - NEWARK, NJ / TERRITORIES FOR SALE BY S. J. JOHNSTON, LEESBURG, VA - PAT. DEC 4, 1894. - - 13.5" combination adjustable monkey wrench and bit brace. Patented by Samuel J. Johnston of Leesburg, Virginia. Good++ with former owner's stamped name "W. T. Brown". (S55)  PAT

0697. 20TH CENTURY - LOWENTRAUT MFG NEWARK, NJ - PAT MAY 21, 1901 / TERRITORIES FOR SALE BY S. J. JOHNSTON, LEESBURG, VA - - 12.75" combination adjustable nut and pipe monkey wrench, bit brace and a screwdriver. Patented by Samuel J. Johnston, Leesburg, Virginia. Complete with the often missing brace pad. Good+. (S53, Cope207)  PAT

0698. Unmarked - - 12.75" brace type tool with wooden knob and grip. Good+.

0699. COPPER HEAD SERVICE WRENCH - PAT. PEND. - THE F. R. LUECK MFG. CO. - MILWAUKEE USA. - - 16.5" speed wrench type revolving head 4-way lug wrench Patent was issued to Frank R. Lueck of Milwaukee, Wisc. on Oct. 3, 1922. Examples seen before were marked "The Fulton Co. Pat, Oct. 3, 1922" Good+.  PAT

0700. P. LOWENTRAUT - NEWARK, NJ / TERRITORIES FOR SALE BY S. J. JOHNSTON, LEESBURG, VA - PAT. DEC 4, 1894. - - 13.5" combination adjustable monkey wrench and bit brace. Patented by Samuel J. Johnston of Leesburg, Virginia. Fair, jaws are sprung, replaced brace pad? (S55)  PAT

0701. BLACKHAWK - PATD. - 4-IN-1 RIM-WRENCH 5104 - - 18" speed wrench type revolving head 4-way lug wrench. Patents were issued to John B. Drahonovsky, Frank E. Dion and Herbert E. Tautz all of Milwaukee, Wisc. on Dec. 4, 1923 and Feb. 2, 1926. Good.  PAT - -  PAT

PiCs Lots 693 thru 701

0702. G. ELIAS AND BRO - BUFFALO, NY / SILOS - -11.5". Rare silo wrench. Pitted. (R1-160)

0703. EMPIRE MF. Co. / KEOUK IOWA - - 8.75". Rare Iowa wrench. First one we have had to auction. Good+ with some edge damage. (R1-165)

0704. WILDER (Wilder Mfg. Co. - Monore, Mich.) - - 9" Rare Michigan wrench. Another one we have never had before. Excellent. (R3-240)

0705. D. M. Osborne & Co. - Auburn, NY (later IHC) - - 10" Rare Coes type wood handled monkey wrench. Good+ with edge hammer damage. (see R2-227)

0706. DP109 (Oliver) - - 11.75". Good+, minor dings. (R1-360)

0707. 95 - H (Orphan) - - 9". Looks similar to Knowlton 97 wrench. Good+. (see R1-286)

0708. FOR WATER PUMP NUTS ONLY - 4A334 T2 (Caterpillar) - - I2.5". Good++, new paint. (R1-86)

0709. Lot of two: Hayworth Variants
(1.) 103 HAWORTH'S / 103 CHECK ROWER - - 7.5". Fork or claw on end variant. Some light pitting. (R1-227)
(2.) 103 HAWORTH'S / 103 CHECK ROWER - - 7.5". Without the fork or claw on end variant. Good++. (R1-227)

0710. F-29 (Minnesota Prison Industries - Stillwater, Minn.) - - 4.5" flat steel. Good++. (R3-154)

0711. CD (W. R. Harrison Co. - Massillon, Ohio) - - 7.75" by 7. 5". Rare odd tee wrench. Good++. (R3-103)

0712. C5P5777 (Rumely (La Porte, Indiana) - 3.25" double hex socket. Good++. (parts list picture only at R1-405)

0713. CASE FARM TOOLS CUTS YOUR COSTS - - 4.5" aluminum angle and drill size gauge. Good+.

0714. M350 USE FOR AXLE NUTS ONLY - "MADE IN USA" (Standard Ditching Machine Co. - St. Louis, MO) - - 15.5". Good+, dings under new paint. (couldn't find this marking variation in Rathbone)

0715. 96 - VULCAN PLOW CO / EVANSVILLE IND. (CH logo) - - 10". Pitted under new paint. (R1-475)

0716. 7B8975 (Caterpillar) with a "M" in a shield logo - - 11.75" square box end wrench with scraper blade. Good++. (R3-43)

0717. PARKER PLOW CO (Richmond, Indiana) - - 9.5" Good++. (R1-369)

0718. DAVID BRADLEY MFG. CO. / BRADLEY ILL. - B238 - - 10". No hammer variation. Good++, painted. (R1-126)

0719. TWIN CITY TANK & SILO CO - 5/8 / MINNEAPOLIS MINN - 1/2 - - 10". Small markings variant. Good+. (R1-461)

0720. B. F. AVERY & SONS / CHILLED PLOW - K209 (Louisville, KY) - - 9.25". Pitting under new paint. (R1-27)

0721. AVERY / 464 (Avery Co. - Peoria, ILL) - - 6.5". Good++, painted. (R1-26)

PiCs Lots 702 thru 721

0722. OXO (in cutout letters) / L234 (Noxon Brothers of Ingersoll, Ontario, Canada) - - 8.25" CUTOUT. Same wrench as the Noxon L234 without the two N's. Wrench mounted on the tool box that has the N's. Pitting. (R1-256)

0723. S437 - LITCHFIELD (in cutout letters) (Litchfield Mfg. Co., Waterloo, Iowa) - - 7" CUTOUT. Good with some pitting. (R1-299)

0724. COMET / 121C (Peter Hamilton Mfg. Co., Ontario, Canada) - 6.75" CUTOUT. Part number on back side variation. Good+ with some pitting, weakly marked part number. (R1-111)

0725. UNIVERSAL (in cutout letters) (Ames Plow Co. - Worcester and Ayer, Mass.) - - 5" CUTOUT. No part number variation. Good++. (R1-466)

0726. UNIVERSAL (in cutout letters) E12 (Ames Plow Co. - Worcester and Ayer, Mass.) - - 5" CUTOUT. Marked with part number variation. Good+. (R1-466)

0727. PITTS (CUTOUT LETTERS) (Buffalo Pitts Co. - Buffalo, NY - Also on the IHC Tool List - - 10". CUTOUT. Pitted, one jaw is sprung. (R1-68)

0728. VERITY / P61 (Verity Plow Co / Massey-Harris) - - 6.5" CUTOUT. Good+. (R1-472)

0729. IHC / 770E - - 10" with CUTOUT IHC logo A hubcap wrench for International Harvester's early high wheel autos and trucks. Good solid wrench that has been painted but looks good underneath the paint with just a few areas with light pitting. Guaranteed original not one of the phony recasts. (R1-256)

0730. Lot of Two: Planet Jr. Cutout Wrenches
(1.) PLANET JR. / 3 (S. L. Allen & Co. - Philadelphia, Penn.) - - 6.5" with CUTOUT letters. Good+.
(2.) PLANET JR. / 2 (S. L. Allen & Co. - Philadelphia, Penn.) - - 6.25" with CUTOUT letters. Good+.

0731. E39 - IRON AGE (cutout letters) (A. B. Farquhar, York, PA and Bateman Mfg. Grenloch, NJ) - - 8.5" CUTOUT with hammer head. Pitted. (R1-260)

0732. C9 - IRON AGE (in cutout letters) (A. B. Farquhar, York, PA and Bateman Mfg. Grenloch, NJ) - - 6.25" CUTOUT with small hammer head. Smaller square box end variant. Good++. (R!-260)

0733. Lot of Two: BLACKHAWK (in cutout letters) (Sechler / Oliver) - - 7.5" cutouts with hammer heads.
(1.) No stud variation. Poor, pitted, jaw crack.
(2.) With stud variation, Good+.

0734. DEERE (IN CUTOUT LETTERS) with a "U" logo - - 8" Like Deere A196 cutout wrench but not marked with part numbers. Good with jaw crack caused by casting flaw. (variant not on Dill's list)

PiCs Lots 722 thru 734 sub

Lots 735 thru 738 below are a nice collection of four sizes of the International Mfg Co's screw and lever adjust wagon wrenches with wooden spinner handles. Patent was issued to Ernil Klemm of Chicago on Dec, 12,. 1905. First complete set I have had to auction. (S222)  PAT

0735. INTERNATIONAL MFG CO - 4 - PATENT DEC 12, 05 / 1408 WABASH AVE CHICAGO - - 18.75". Good++. (S222)

0736. INTERNATIONAL MFG CO - 3 - PATENT DEC 12, 05 / 1408 WABASH AVE CHICAGO - - 20". Good++. (S222)

0737. INTERNATIONAL MFG CO - 2 - PATENT PENDING / 1408 WABASH AVE CHICAGO - - 14". Good++, wooden knob looks like a replacement.. (S222)

0738. NO. 1 INTL. MFG. CO. - PATENT PENDING / CHICAGO ILL - - 10.25". Good++. (S222)

0739. Marked only with an arm and axe logo - - 11.75" early turn handle to adjust coach wrench with twin jaws and octagon shaped wooden handle. Good+ with some handle chips.

0740. DIAMOND WRENCH MFG. CO. - STEEL FORGED - PORTLAND, ME / PATD NOV 2, '80 - OCT 16, '83 (hammer dings over markings, not all readable) - - 8.5" wooden handled double jawed wrench (one side with a regular nut wrench jaw and the other for buggy or wagon nuts). Patented by H. A. Thompson of Farmington, Maine. Good with some hammer dings, some markings not readable, replaced handle nut (S208)  PAT

0741. G. A. HOSMER & CO - BUFFALO NY - PAT APLD FOR (not all makings are readable) - - 7.5" combination plier type buggy wrench with four open end wrenches. Canadian patent was issued to Giles Arnel Hosmer of Buffalo, NY on Nov. 06, 1894. Good, pitting, weak, unreadable markings. (S198)  PAT

0742. T G MANDT WRENCH 10 (star logo) - PAT JUNE 13 1896 (T. G. Mandt Mfg. Co. - Stoughton, Wis. - later Moline Plow Co.) - - 10." wagon hub wrench and hitch pin. Star logo variation. Applicable patent was issued to William John Leach of Brighton, Wisc. on Jun. 30, 1896. Good+ with quite a bit of clevis wear on shaft. (S215, R1-307, C210)  PAT

0743. Unmarked (orphan) - - 10" oddball buggy type wrench with a claw on one end. Good+. (not listed, no info found)

0744. Unmarked (orphan) - - 12" oddball with large square wrench on end. Good++. (R1-504 - Oddball page)

0745. SHELDON AXLE CO (Sheldon Axle Co., Wilkes-Barre, Pennsylvania) / 151X - - 8.75". Good+. (R1-423)

PiCs Lots 735 thru 745

0746. HENNEY / C (Henney Buggy Co, - Freeport, Illinois) - - 7.5" Dayton style buggy wrench. Good+, over cleaned. (R1-229)

0747. PRATT / 2813C (Wm. E. Pratt Mfg. Co., Chicago, Illinois) - - 7.5" Dayton style buggy wrench. Good++. (R1-384)

0748. MOON BROS / C (Moon Buggy Co. - St. Louis, Missouri) - - 7.75" Dayton style buggy wrench. Some hammer damage, not cleaned. (R1-337)

0749. AMES (F. A. Ames & Co. - Owensboro, Ky.) / PATENTED (with Dayton's "D" in a circle logo - - 7.5" Dayton style buggy wrench. Some light pitting, not cleaned. (R1-18)

0750. HENNEY / B (Henney Buggy Co, - Freeport, Illinois) - - 7.5" Dayton style buggy wrench. Good+ with some hammer dings. (R1-229)

0751. FREEPORT (Freeport Buggy Co. - Moline, Illinois owned by the Moline Plow Co.) / G - - 8" Dayton type buggy wrench. Markings indented, square center opening variant. Good+. (R1-184)

0752. ST. LOUIS WRENCH CO / PATD JAN 27-91 - - 9" buggy wrench. Patented by John A. Miller of St. Louis, Missouri. Good with some unreadable markings, not cleaned. (R1-434)  PAT

0753. Lot of Two: Miller's Patent Buggy Wrenches  PAT
(1.) ST. LOUIS WRENCH CO / PATD JAN 27 91 - - 7.5" buggy wrench. Good+, not cleaned. (R1-434)
(2.) MILLER WRENCH CO. / PATD JAN 27 91 - X - - 6" buggy wrench. Smallest of the Miller Vehicle Wrenches. Badly pitted. (R1-327)

0754. STUDEBAKER (with a circle logo) / 7/8 (Studebaker Bros. - South Bend, Indiana) - - 7.75" buggy wrench. Some pitting, not cleaned. (R1-444)

0755. STUDEBAKER / 7/8 (Studebaker Bros. - South Bend, Indiana) - - 7.75" buggy wrench. Good+, not cleaned. (R1-444)

0756. 4025A DAYTON - - 8.5" double hex box ends. Buggy wrench style but I think it was sold as a sparkplug wrench? Excellent.

0757. IDEAL - 7321C with Eberhard's "E" in a circle logo / PAT APR 28 1903 - - 8.5" (1-1/8" square nut size) Buggy wrench with nut holder. The Ideal buggy wrenches were patented by Nathaniel Stone of Outlook, Washington and mfg. by Eberhard Mfg Co., Cleveland, Ohio. Some pitting. (R1-246)  PAT

0758. IDEAL / PAT APR 28 1903 - - 8.5" (1" square nut size) Buggy wrench with nut holder. Good+ with some pitting. (R1-246)  PAT

0759. T G MANDT WRENCH - PAT JUNE 13 1896 (T. G. Mandt Mfg. Co. - Stoughton, Wis. - later Moline Plow Co.) - - 10." wagon hub wrench and hitch pin. No star logo variation. Applicable patent was issued to William John Leach of Brighton, Wisc. on Jun. 30, 1896. Good++. (S215, R1-307, C210)  PAT

0760. SHELDON AXLE CO (Sheldon Axle Co., Wilkes-Barre, Penn.) / 77 - - 9.75" buggy wrench. Good+, shaft is bent which could easily be fixed. (R1-423)

0761. SECHLER - MOLINE (D. M. Sechler Carriage & Imp. Co. - Moline, ILL.) / 1 INCH - - 8" buggy wrench. Solid version (also found with cut out letters. Good+ with some pitting. (R1-419)

0762. STUDEBAKER / 1-1/4 (Studebaker Bros. - South Bend, Indiana) - - 9.75" buggy wrench. Rare large size. Pitting. (R1-444)

0763. STUDEBAKER / 7/8 (Studebaker Bros. - South Bend, Indiana) - - 7.75" buggy wrench. Painted. (R1-444)

0764. STUDEBAKER / 7/8 (Studebaker Bros. - South Bend, Indiana) - - 7.75" buggy wrench. Good+. (R1-444)

0765. HARPER / PAT. APD F [sic] (Harper Buggy Co. - Columbia City, Indiana) - - 8" buggy wrench. Good+, nut holding spring is missing. (R1-218)

PiCs Lots 746 thru 765

0766. Lot of Three: Buggy Wrenches
(1.) 1098D (orphan) - - 8.25".
(2.) 2315A with Eberhard's "E" in a circle logo/ PAT'D - - 8.5".
(3.) 28919 B 7-8 (orphan) / "D" in a diamond logo - - 9".

0767. Lot of Four: Buggy Wrenches, Two are Eberhards, one unmarked is painted, one unmarked is pitted.

0768. Lot of Five: Buggy Wrenches
(1.) 7310C / PAT'D with Eberhard's "E" in a circle logo - - 9".
(2.) 2320C (Eberhard Mfg. Co. - Cleveland, Ohio) / PAT"D - - 8.75".
(3.) 526 (orphan) - - 8.25".
(4.) 7320A with a "S" in a square logo (orphan) - - 7.75".
(5.) PARRY (Parry Mfg. Co. - Indianapolis, Indiana) - - 7" buggy whip holder and wrench. Severe pitting. (R1-372)

0769. MAYTAG 14987 (No. 3) - - 5.25". Gas engine wrench. Excellent. (R1-317)

0770. MAYTAG (No. 8) - - 5.25". Gas engine Wrench. Good++. (R1-317)

0771. Lot of Three: Maytag Wrenches
(1.) MAYTAG (No. 2) - - 5.25". Gas engine wrench. Good+. (R1-317)
(2.) MAYTAG (No. 6) - - 5.25". Gas engine wrench. Excellent. (R1-317)
(3.) Unmarked (Maytag No. 9?) - - 4.75". Good+. (R1-317)

0772. Lot of Six: These six tools were with the owner's Maytag wrenches. I couldn't identify all of them.
(1.) 38495 (The Maytag Co. - Newton, Iowa) - - 9". Tool shown in canvas tool roll (fourth from left - Rathbone Vol. 2, page 189)
(2.) 12157 ROBINAIR USA - - 10".
(3.) GULMITE (The Maytag Co. - Newton, Iowa) - - 6". Gulmite fitting wrench shown in canvas tool roll (first on the left - Rathbone Vol. 2, page 189)
(4.) GULMITE - U.S. PATENT 2103944 - - 11" tee handled wrench with Gulmite socket. For Maytag Washers? Patent was granted on Dec. 28, 1937 to Arthur V. Gullborg of Chicago, Ill. Excellent.  PAT
(5.) 12154 ROBINAIR USA - - 9.25" tub mounting and pulsator nut wrench. Edge hammer damage.
(6.) 12171 ROBINAIR USA - - 9.25". Edge hammer damage.

0773. 38313 - 500 - A12393-1 (The Maytag Co. - Newton, Iowa) - - 9" odd face spanner wrench. Edge hammer damage. (not in Rathbone)

PiCs Lots 766 thru 773

John Deere and Related Companies Wrenches - Part Two (lots 774 thru 805)

0774. A196A - DEERE (in cutout letters) - - 8" CUTOUT . Part number runs up beside large end variant. Poor casting on part number, not readable. (D162)

0775. A196 - DEERE (in cutout letters) - U - - 8" CUTOUT . Part number above the small open end variant. New paint. (D157, R1-131)

0776. DEERE A196A / DEERE - - 8". Scarce solid, not cutout with wide letters and reverse markings variation. Jaw crack. (D165)

0777. DEERE & CO (HZ5061) - - 8" wood handled monkey wrench, knurled adjusting knob variation. Good+ with some dings. (D340)

0778. J11316 (John Deere Corn Picker Wrench) - - 8.5" flat steel. Scarce John Deer Wrench Good++. (D358, no photo in Rathbone)

0779. M1142 LETZ - HERBRAND / 679 (Letz Mfg. Co. - Crown Point, Indiana, later Deere) - - 8.25" forged double open ended S-wrench. Rare, only three marked on Dill's list Good+ with some minor jaw edge dings.. (D430)

0780. Deere HZ836 - - 7" two round holes on double open end variation. Good+. (D338)

0781. Unmarked (Deere D2064R) - - 11.75" flywheel wrench with 2.5" offset. Good++, green paint. (D301)

0782. Unmarked (Deere D2064R) - - 11.25" flywheel wrench with 2.5" offset. Good++. (D301)

0783. Unmarked (Deere D2064R) - - 11.25" flywheel wrench with 2.5" offset. Good++, red paint. (D301)

0784. Unmarked (Deere D2064R) - - 11.5" flywheel wrench with 3.5" offset. Good+. (D299)

0785. MADE IN USA (Deere D2064R) - - 12.25" flywheel wrench with 3.5" offset. Good++. (D300)

0786. MADE IN USA (Deere D2064R) - - 11.25" flywheel wrench with 3.5" offset. Good++, green paint. (D300)

0787. MADE IN USA (Deere D2064R) - - 11.75" flywheel wrench with 3.5" offset. Good+. (D300)

0788. MADE IN USA (Deere D2064R) - - 11.5" flywheel wrench with 3.5" offset. Good+. (D300)

0789. A123 (Deere) / U - 11.25". Some pitting. (D150)

0790. John Deere / 1340SC - 9" Good+, new paint. (D81)

0791. 148 (Syracuse Chilled Plow / Deere) - - 9.5". Pitting. (D25, R1-448)

0792. DEERE / PAT APR 28 1903 - - 8.5" buggy wrench with nut holder spring with an example of the correct size nut. Patent was granted to Nathaniel Stone of Outlook, Washington. Good+. (D618)  PAT

0793. 136 (Deere) / U - - 10.25". Round holes variant. Some pitting. (D20)

0794. D34 - U (Deere) - - 8.75". Good+. (D277)

PiCs Lots 774 thru 794

0795. Lot of Two: Van Brunt / John Deere Wrenches
(1.) VANBRUNT / (no markings on reverse) - - 7". No stud, 3/4" hex variant. Good++. (D280)
(2.) VAN BRUNT / (no markings on reverse) - - 7". With stud, space between words variant. Good++. (D283)

0796. Lot of Three: Dain / John Deere Wrenches
(1.) DAIN / L136E (Deere) - - 7.75". Markings near slot variation. Good++. (D411)
(2.) Dain (John Deere) / Z78 - U - - 6.25" pitman wrench. Name upside down variant. Good+. (D562)
(3.) G51E (Dain / Deere) - - 8.5". Pitting, rough casting. (D318)

0797. Lot of Two: John Deere 196 Wrench Variants
(1.) 196 (Deere) - - 7". Three long slots and two round hole variant. Good++ except for a tight jaw crack. (D37)
(2.) 196 (Deere) - - 7,25". Two square holes variant. Good++. (D43).

0798. 22611 JOHN DEERE / JOHN DEERE - - 20". Pitted. (D135)

0799. JOHN DEERE (B353R) - -15.75" Flat shaft, six and twelve point box ends variant. Good+. (D248)

0800. JOHN DEERE (B353R) - -15.75" Flat shaft, double twelve point box end variant. Excellent with new paint. (D249)

0801. JOHN DEERE (B352R) / MADE IN - USA - - 11.75". Flat shaft with double hex box ends. Rare, only three shown on Dill's Owner's List. This one has the MADE IN USA in two lines. Painted black. (D247)

0802. JOHN DEERE (B352R) / MADE IN USA - - 11.75". Flat shaft with double hex box ends. Rare, only three shown on Dill's Owner's List. This one has the MADE IN USA in one line. Painted black. (D247)

0803. S26 08D - MOTOR WHEEL - 05164 - 3/4 HEX - MADE IN USA (Deere A5278DU) - - 17.5" lug wrench for John Deere Wagons. marked "MADE IN USA" variant". Excellent. (D193)

0804. Lot of Three: Deere & Mansur Wrenches
(1.) Marked only A523 - - 7.25". Pitted. (D178)
(2.) A523 / DEERE MANSUR CO. - - 6". Good+. (D177)
(3.) A522 / DEERE MANSUR CO. - - 7.5". Reverse markings variation. Good+. (D172)

0805. Lot of Four: Waterloo Boy / John Deere Tractor Wrenches
(1.) No. 253 with Mossberg logos (Waterloo Boy No. K2239) - - 6.75". Good+. (D397)
(2.) No. 255 with Mossberg logos (Waterloo Boy No. K2063) - - 6.75". Good+. (D390)
(3.) No. 264 with Mossberg logos (Waterloo Boy No. K2057) - - 7.75". Good+. (D389)
(4.) No. 282 with Mossberg logos (Waterloo Boy No. K2068) - - 9.75". Some pitting. (D394)

PiCs Lots 795 thru 805

0806. 117A (Advance Thresher Co., Battle Creek, Mich. later Advance-Rumely Co.) - - 7.75" steam engine wrench. Good++. (R2-3)

0807. 834 - 0000-0598 (orphan) - - 16" heavy cast oddball with two handles and three sockets (two hex and one square), Good+. (not listed, no info found)

0808. D3J31 (Advance-Rumely) - - 6" x 8.75" tee socket wrench. Good+, new paint. (R1-405)

0809. DEMPSTER (Dempster Mill Mfg. Co, - Beatrice, Neb) - - 7.25" Deering pattern. Area of pitting. (R1-143)

0810. P & O CO (IHC) - 940X / CANTON ILL - - 5". Good+. (R1-370)

0811. P1081 (orphan) - - 16.25". Odd hub type wrench. Double end variant. Excellent. (R2-145 as an IHC wrench)

0812. HESTER PLOW CO - 1 (Jacksonville, Florida) - - 14.25" rough casting, original paint? (R1-232)

0813. W111 - WILLETT TRUCK GRADER / WILLETT WORK - IT WILL IF IT'S A WILLETT (Willett Mfg. Co. - Grand Rapids, Mich.) - - 22" This one stands out in a crowd of other wrenches. Not many wrenches have the company's slogan on them. First one we had had to offer. Slightly bent, minor abrasions. (R3-241)

0814. Unmarked (Moline Plow No. RD2108) - - 22.25" plow wrench. Excellent with original red paint. (parts list pic R1-333. R3-157)

0815. MOLINE PLOW CO. / HX34 - - 11". Good++. (R1-333)

0816. DREIS & KRUMP MFG CO CHICAGO ILL - - 12.5". Heavy, thick wrench with six openings. Good. (R1-151)

0817. OP123 (orphan) - - 8". Slightly twisted, hairline crack. (not listed, no info found)

0818. R-I. P. Co - L049 / Hay Loader (Rock Island Plow Co.) - - 7.5". Good+. (R#400)

0819. P123 (Whitman & Barnes) - - 5.5" For Whitman & Barnes High Wheel Lawn Mowers. Good++. (not in Rathbone)

PiCs Lots 806 thru 819

0820. TC369 (Allis Chalmers) - - 9.75". Good++. (R1-11)

0821. 171J (Advance Thresher Co., Battle Creek, Mich. Later Advance-Rumely Co.) - 11.5" large doe steam engine wrench. Good++. (R2-4)

0822. D. M. CO (Dowden Manufacturing Co - Prairie City, Iowa) - - 7.5". No part number variation. Note: This wrench was attributed to Deere & Mansur till its discovery in a Dowden Parts Book. Good++. (R3-70)

0823. 100 (Wood Bros. Thresher Co. - Des Moines, Iowa.) - - 10.5" offset double open end wrench. Excellent. (not in Rathbone, recently identified from a parts list)

0824. Marked only "78" (orphan) - - 12.25" heavy cast double socket wrench. Good++.

0825. NEW HOLLAND / FEED MILL (New Holland Machine Co. - New Holland, Penn.) - - 5.75". Good++. (R1-348)

0826. Unmarked - - (Stover Mfg. Co. - Freeport, ILL.) - - 14.25". Jaw end chip. (R1-443).

0827. 105N (Advance Thresher Co., Battle Creek, Mich. Later Advance-Rumely Co.) - 13" large doe steam engine wrench. Some pitting. (R2-4)

0828. H63 (Oliver, Ohio Rake) - - 6.75". Excellent. (R361, R359)

0829. OLIVER - RP210 / OLIVER - - 13.5". Pitted. (R1-361)

0830. OLIVER / CP245 - - 9.25". Pitted. (R1-361)

0831. OLIVER - RP208 / OLIVER (also stamped "30") - - 8.25". Good+. (R1-361)

0832. SEEDER (Seeder Mfg. Co. - Homer, Mich.?) - - 7 ". Thick, heavy casting. Two jaw ears missing. Most of the few I have seen have broken jaws. (R1-420)

0833. Unmarked ( Messinger Mfg. Co. - Tatamy, Penn.) - - 10". According to Rathbone this wrench came with the Empire No. 1 and 2 Feed Cutters. It was the wench used as a pattern for the fake Messinger wrench. (see R2-198,)

0834. MORRISON MFG CO (Ft. Dodge, Iowa) - - 10". Good++. (R1-340)

0835. Marked only "1" (orphan) - - 10.5" Interesting oddball with a hook spanner on one end. Excellent. (not listed, no info found)

0836. J. I. Case Plow Co / 124 - - 9.75". Rare, early Case Plow wrench from before the name change from Company to Works. Pitted. (R1-77)

0837. MALSBARY 6180 (Holt Mfg. Co. - Stockton, Calif.) - - 13.5". Holt Mfg. made the Malsbary Gain Drill. Good++. (R1-306)

0838. ROBINSON SPREADER CO - VINTON IOWA / A43 (with a "C") - - 10.5". Good+. (R1-399)

PiCs Lots 820 thru 838

0839. Unmarked (oddball orphan) - - 11". Good+. (not listed, no info found)

0840. Unmarked (orphan) - - 9.5" oddball with six openings. Over cleaned. (not listed, no info found)

0841. Marked only "LW" (orphan) - - 8" by 9". Oddball heavy cast L-shaped double open ended wrench. Excellent.

0842. WORTHINGTON - 2-1/2 (Worthington Pump Co. - Brooklyn, NY) - - 7.25". Worthington made steam pumps. Pitting. (R1-498)

0843. Famous Ohio - J276 (Ohio Cultivator Co. Bellevue, Ohio) - - 9.5". Good+. (R1-357)

0844. A109 (Fuller & Johnson - Madison, Wisc. - - 9.5" heavy thick cast doe-s wrench. Rare wrench, first we have had to auction. (listed in Rathbone's latest Supplement But not pictured in book)

0845. Unmarked (oddball orphan) - - 10" crude, heavy cast with hammer poll and an extension on end of the handle. Good+, wrench usually found with the extension missing. (not listed, no info found)

0846. RITTER 1 - 2 - 3 - 4 (same markings both sides) - - 6.75". Non magnetic bronze like metal. Good++.

0847. HARDER / X60 (Harder Mfg. Co. - Cobleskill, NY) - - 9.25". Pitting. (R1-216)

0848. W. B. HUBBARD & SONS CO. - - 10" cast wrench with an odd two stepped opening. Good++. (not listed, no info found).

0849. Lot of Three: Small Cast Wrenches
(1.) Marked only "A" (orphan) - - 5". Good++. (not listed, no info found)
(2.) 1036B (Pennsylvania Lawn Mower Co.) - - 4". Good++. (R1-375)
(3.) DK BB348 (orphan) - - 4.75". Excellent. (not listed, no info found)

0850. Lot of Three: Cast Oddball Wenches
(1.) B5 (Mast, Foos & Co. - Springfield, Ohio) - - 4". Good++. (R2-186)
(2.) D580? (bad casting, not sure of numbers) (orphan) - - 3.5". Good+ except for poor casting on part number - anybody have one with readable numbers? (not listed, no info found)
(3.) G155 - 4 (orphan) - - 5.5". Excellent. (not listed, no info found)

0851. Lot of Three: Small Cast Wrenches.
(1.) S & B (orphan) - - 7.5" with an odd opening. (not listed, no info found)
(2.) CF CO. (orphan) - - 4". Good++. (not listed, no info found)
(3.) Unmarked (Campbell Corn Drill Company - Harrison, Ohio) - - 5.5". Identified from a Campbell Parts Lists for their No. 2 and No. 3 one horse drills. Excellent. (R3-41).

0852. G3526 (IHC logo) - - 11.5". All marking raised. Good+. (R253)

0853. DEERING / HAY RAKE (William Deering & Co. later IHC) - - 6.5". Pitting. (R1-139)

0854. 272 (Superior Drill Co.) - - 9.5". Extended jaw variant. Rathbone also shows this wrench under Kingman Plow Co. Excellent with original finish? (R1-284, R1-446, R2-11)

0855. FULLER & JOHNSON (Madison, Wisc.) / 2P30 - - 9". One square box opening variant. Good+ with a casting flaw hole. (R1-191)

0856. B. F. AVERY & SONS - G176A / LOUISVILLE KY USA - - 8.5". Good+. (R1-27)

PiCs Lots 839 thru 856

0857. H272 (IHC, Aultman Miller Corn King Spreader, and Little Giant Fence Loom) - - 15" round hole with key and square box with four openings on shaft variant. Good+. (R1-17)

0858. Unmarked (Wheelers Self Rake - Cayuga Chief, Osborne, IHC) - - 10.75" Pitting.

0859. CHAMPION SILO / WESTERN SILO CO DES MOINES IOWA - - 12". Single socket variant. Some pitting. (R1-484)

0860. C.D. EDWARDS MFG CO - 108 (Albert Lea , Minn.) - - 12". Good+ with weak unreadable marking as usually found. (R1-159)

0861. CM-331 (Thomas Mfg. Co. - Springfield, Ohio, later Ohio Cultivator Co. - Bellevue, Ohio) - - 12.75". Two openings variant. Excellent. (R1-357, R1-454)

0862. Marked only PTD (oddball, orphan) - - 6.75". Strange open handle, hex box wrench. Some light pitting. (not listed, no info found)

0863. PO11 (McKenzie Mfg. Co. - La Crosse, Wisc for No. 5 Planter - also on IHC wrench list) - - 7.75". Three opening variation. Good++. (R1-254)

0864. BIW (Beatrice Iron Works, Beatrice, Nebraska) - - 8". Good++. (R1-34)

0865. 4S (Sandwich Mfg Co., Sandwich, Illinois) - - 7.25". Some pitting. (R1-412)

0866. SHARES / N167 (Janesville Machine Co.) - - 5.5". (R1-265)

0867. BASE WRENCH / EP49 (Oliver / IHC Canada) - - 6.75". Good+. (R1-360)

0868. 52 (Orphan) - - 8". "52" is a Tudhope Anderson wrench number but this is not the wrench shown in Rathbone's book or in a known Tudhope Anderson Parts Book. Good+. (R2-279)

0869. Lot of Three: Cast Wrenches
(1.) 2054 (raised) 2054 (indented) / C (orphan) - - 9.5" . Good++. (not listed, no info)
(2.) A52 (orphan) - -5" cast box by open end with center ridge. Excellent. (not listed, no info)
(3.) W89 (orphan) - - 6.5" thick little cast wrench with four openings. Pitted. (not listed, no info)

0870. Lot of Three: Misc. Wrenches
(1.) Unmarked 260 (McCormick / IHC / / Kentucky Drill / Hoosier Drill / American Seeding Machine) - - 7". Pitting.
(2.) Unmarked ( Associated Mfg. Co. - Waterloo, Iowa) - - 7,75" steel spanner and open end wrench for "Iowa" Cream Separators. Good= with minor dings. (R1-22)
(3.) L4657 (with "MH" logo - McKraig-Hatch? - - 5" forged doe. Good++.

0871. Lot of Two: Knowlton Mower Wrenches (R1-286)
(1.) KNOWLTON - - - 8.5" with small hammer head and keyhole cutout. Pitted. (marking variation not in Rathbone)
(2.) KNOWLTON / 97 - - 8.5" with small hammer head and keyhole cutout like above but with part number and reverse markings. Pitted.

0872. Unmarked - - 12". This tool which has been a frequent visitor to the What's It's table at tool shows has been identified as a "Breakback Wrench" from a listing in a Dayton-Symons-Superior Catalog for concrete tools, etc. (catalog No. A30, list price $325.08 each!). Good++ with most of the original finish.

PiCs Lots 857 thru 872

0873. PAT. OCT 20. 1903 - MADE BY COES WRENCH CO (marked on the upper jaw) - TRADEMARK KEY MODEL with a skeleton key logo (marked on handle shaft) - - 32" (advertised as the 28" size). Coes smallest Key Model adjustable wrench (see lot 630 for it's 72 inch big brother). Patented by Loring Coes of Worcester, Mass, (Loring Coes last wrench patent). Good+ with some edge dings and grind marks on the shaft. (HP60)  PAT

0874. HUDSON / G69 with a "M" logo (Hudson Mfg. Co., - Minneapolis, Min.) - - 5.75". Good++. (R1-244)

0875. SUPERIOR BOG QUALITY (Bog Mfg. Co. - Chicago, Illinois) - - 22.25" speed wrench type with wooden knob and two hex sockets to turn a nut while holding the bolt head. Used on automotive oil pans, transmission flanges, etc. Good++.

0876. GABRIEL SNUBBER ADJUSTER / F - - 11.75" odd two prong tool for adjusting spring snubbers, an accessory sold for early automobiles. I have sold a couple of these before but these are the first one with the Gabriel name. Excellent with original black finish.

0877. Unmarked - - 9.5" cast after market Ford wrench for hubcaps, etc. Good+.

0878. 1RN379 (Reo Automobile) with Herbrand logo - - 9" cast single hex box with four pegs valve port wrench. Identified from 1916 Reo Touring Parts Lists. Good+.

0879. No. 610 - PAT. AP. FOR - USA (with Mossberg logos) - - 21.5" brace type valve grinder with wooden pad and grip. Good++.

0880. K. R. WILSON - BUFFALO NY / PINION BEARING TORQUE TESTER - 33 158 - PAT APLD FOR - - 10." odd tool with a scale marked from 10 to 50. Wilson was a major supplier of Ford shop tools. Good++ but a spring is missing. (not listed, patent not found)

0881. FEELZIT VALVE SET GAUGE - PAT. PEND. - SKS logo - SEAKELEY - - 9" valve adjusting tool with socket holder, screwdriver bit and gauge. Excellent

0882. US MOD. 1879 - - 2.5" combination Springfield Rifle tool. Good++.

0883. -A- G & J PRODUCT (in a diamond logo) - - 3" miniature side adjust nut wrench with a screwdriver end. Some light pitting..

0884. STERLING - - 5.5" odd little wrench with three hex and one square openings. For Sterling bicycles? Good++.

0885. THOR 3-6-10 - - 5.75" open end by tapered square. Thor Motorcycle wrench? Excellent.

0886. FIRESTONE - - 5" combination alligator wrench, two feeler gauges and tire core tool. Probably made by Herbrand (see MVWC Newsletter Dec. 2007, pg. 15). Excellent. (not listed)

0887. E. M. F. Co. Detroit - A1308 (Everett-Metzger-Flanders, Studebaker after 1910) - - 7" hex socket and two prong valve port cap wrench. Good+.

0888. Lot of Four: Forged Motorcycle and Automobile Took Kit Wrenches
(1.) FIAT 17 - 13 - - 6" doe.
(2.) YAMAHA 14 - 17 - - 5.75" doe.
(3.) YAMAHA 19 -22 - - 5.5" double box end.
(4.) TRIUMPH / NA55 - - 5.75" doe.

0889. Lot of Four: JOAR Conduit Wrenches. Sizes 6, 8, 10 and 22.

PiCs Lots 873 thru 889

0890. UTILITOOL CO CHICAGO USA PAT 12-2-'13 - - 8.75" combination pivoting head plier tool with nipper and plier jaws, screwdriver and nail puller on the handle ends.. Made by the Utility Tool Co of Chicago and patented by Henry G. Wernimont, of Washington, DC. advertised as "Fifteen Tools in One". Good+ with some weak markings, not all readable. (C311)  PAT

0891. NACO - PAT 1919 - - 7.25" comb. pliers, cutter with screwdriver end. Pliers has an usual screw adjustment to set the jaw opening. Patent was issued to Dan B. Swickard of Galva, ILL. on Oct. 28, 1919. Tool is Excellent, plating is Good+ with some minor dings. (S248)  PAT.

0892. GILMER - PAT. 2-13-12 - - 6" combination pliers and spreader for repairing tires. Patent was granted to George Walker Gilmer, Jr. of Philadelphia, Penn. Good++.  PAT

0893. Lot of Two: Similar looking shop made pliers with locking notches on the handles. - - 8" and 9". Excellent.

0894. W. SCHOLLHORN CO.- NEW HAVEN, CONN. - - 5" specialty pliers for cutting and splicing round belts of the type that were used on treadle sewing machines, etc. Patented by William A. Bernard of New Haven, Conn. on Dec. 27, 1892. Excellent.  PAT

0895. SINGER - SIMANCO - USA (Sewing Machine Co.) -120614 - - 5" specialty pliers for cutting and splicing round belts. Excellent.

0896. Unmarked - - 6.5" nail and tack pulling pliers. Patent was granted on Dec 13, 1932 to Theobald Kluglein of New York, NY. Good+ with light pitting, mostly on one side.  PAT

0897. Marked only "2H" - - 7.5" pliers with thick circular jaws with a flat surface. I have seen this pliers identified as a hair straightening tool. Good++.

0898. Unmarked - - 7" combination pliers and adjustable alligator wrench. Patents were issued on 7-2-1907, 3-31-1908 and 7-19-1910 to Norman McAslan of Yorkshire, Iowa. Severely pitted.. (S255, C215)  PAT.

0899. SUPER GRIP TOOL CO IOWA - PAT 1-16-33 - - 8" pliers with a geared cam mechanism. Patent was granted on June 27, 1933 (not Jan 16, 1933 as marked on the pliers) to Gilbey M. Clifton of Perry, Iowa. Good+. (S245)  PAT.

0900. NO 10 GRIPSO MULTI DUTY - BASFORD S.F. USA PAT. No. 2600512 - - 7.75" different slip joint pliers. Patented by Homer A. Mead of Turlock, California. Some grind marks. (S234)  PAT

0901. P & C - 1234 - MFG. USA - USA - PAT. No. 2600512 - - 7.75" slip pint pliers like Lot 900 above. I think there are four or five different manufactures of this pliers. Good++.  PAT

0902. DUPONT NO. 4 - - 7" dynamite cap and fuse combination pliers. Good+ with some spots of corrosion. .

0903. Lot of Three: Pliers
(1.) BILLINGS - - 6.5" slip joint pliers with different hole in jaws. Good+.
(2.) NAUSER & REISFELD INC. - GERMANY - - 7.5" duck bill pliers with extra wide jaws. Glass breaking pliers? Excellent.
(3.) 44 - SNAP-ON - VACCUM GRIP - - 4.5" small slip joint pliers. Excellent.

PiCs Lots 890 thru 903

0904. Lot of Five: Misc. Wrenches
(1.) AIM CO - L36 - - 9" cast. Good++. ( R1-2)
(2.) REVERSE GEAR WRENCH - - 8.5" soe with offset end. Good++ with some minor jaw edge damage.
(3.) L297 (New Idea Spreader Co. - Coldwater, Ohio) - - 6". Good++. (R1-349)
(4.) DEL. S. CO. NEW YORK USA (Delaval) / 1199 - - 6". Good++. (R1-141)
(5.) W21 (Mast, Foos & Co) - - 4.5" double open ended S-wrench for Mast, Foos Lawn Mowers. Good++. (R3-142)

0905. Lot of Three: Small Cast Wrenches
(1.) J & L (orphan) - - 5.25". Good++. (not listed, no info found)
(2.) Unmarked (odd ball, orphan) - - 6.5" Excellent.
(3.) Unmarked (Pickering) - - 4.5" cast single end wrench with loop handle for Pickering Steam and Gas Engine Governors. Excellent. (R3-175)

0906. Unmarked - - 9" nut or pipe wrench with an unique sliding handle that has notches that engage in one of three different pins on side of wrench. Patented by John P. Kibler of Eura, Virginia on Oct. 30, 1900.. Scarce wrench, only third one I've seen. Good+. (S685)  PAT.

0907. PLOMB - 3 LB - -13" hammer with twin tapered heads. Used for? Couldn't find this one in "The Hammer Book". Green painted handle has a drilled hang hole on the end.

0908. Lot of Two:
(1.) HERCULES (inside a Whitman & Barnes logo) - PATENT FEB. 27, 83 / GENDON I. W. CO. (Gendron Iron Wheel Co.) TOLEDO, O.- - 4-1/8" Hercules loop handle adjustable nut wrench. First Acme I have seen with the Gendon imprint. Small size in Good++ condition.  PAT
(2.) ACME (in a diamond logo) PAT FEB 27, 83 - - 4-7/8"" pre Whitman & Barnes Acme twist handle wrench. Good+ with slightly sprung jaws. some weak markings.

0909. AMERICAN WRENCH - PAT. SEPT. 8, 1885 - AUGUSTA, MAINE - - 6.75" screw adjust carriage wrench with a ribbed wooden handle, single jaw variant. Patented by Bradford Lancaster (Augusta, Maine). Good++. (S231, C40, C50)    PAT

0910. Unmarked (Miller Falls Co of Miller Falls, Mass.) - - 8.25" carriage wrench with a metal spinner handle. Square head variation. Good. (S207, C221)

0911. Lot of Two: Universal Fuel Storage Tank or Barrel Bung Six Way Wrenches
(1.) Unmarked - - 8"..
(2.) UNICO - ELIZ. NJ / PAT. PEND. - - 8".

0912. Lot of Eleven: Mixed lot of small flat steel wrenches. bottle and can opener, small spoon and a New Old Stock POPULAR MECHANICS 5 OZ. Magnetic Tack Hammer with original labels.

PiCs Lots 904 thru 912

0913. LITTLE GIANT - 24" - PATENTED FEB-4-1913 / GREENFIELD, MASS. USA (with a GTD logo) - - 24" pipe wrench with four way jaws. Patented by Addison B. Carll of Boothwyn, Penn. (he also had the patent for the Carll reversible jaw Crescent type wrenches). Scarce large size. Excellent. (S600)  PAT

PiC Lot 913

Choice Box Lots (will be sold choice item from each lot)

Choice Box 001: Lot of Four: All Metal Trimo Nut Wrenches. All are the washer type adjusting nut guard type and marked PAT'D 12-19-1911. Patent was issued to John H. Vinton of Boston, Mass.  PAT.
(1.) 18" size
(2.) 15" size. Nut guard is missing.
(3.) 8" size
(4.) 6" size

Choice Box 002: Lot of Four: All Metal Trimo Nut Wrenches
(1.) 6" size. Washer nut guard is missing, dings.
(2.) 8" size earliest versions of the Trimo all steel nut wrenches with a distinctive slotted shaft on the adjustable jaw. Patented by Alfred G. Ely of New York, NY on July 19, 1904. Pitting. (S435)  PAT
(3.) 15" size marked: TRIMO ST. PIERRE WORCESTER MASS / PAT"D 12-10-11. Excellent.
(4.) 18" size. Washer nut guard is missing.

PiCs Lots CB 1 and 2

Choice Box 003: Lot of Seven: Wood Handled Monkey Wrenches
(1.) 8" BEMIS & CALL CO. / B & C TRADEMARK - - Combination nut and pipe wrench with long adjusting sleeve. Good++.
(2.) 8" BEMIS & CALL CO. / B & C TRADEMARK - - Combination nut and pipe wrench with long adjusting sleeve. Good
(3.) 8" P. S. & W. TOOLS (with fist and hammer logo) (Peck, Stow & Wilcox) - SOLID BAR - PAT JAN 14, 1896 - - Knife type handle.
(4.) 8" COES WRENCH CO. / MFD UNDER L. COES PAT'S - STEEL (Marked like HP58 but with wood knife type handle instead of steel)
(5.) 8" LAMSON & SESSIONS CO. - CLEVELAND - -Fair./
(6.) 6" Whitman & Barnes - - Poor handle.
(7.) 6" GIRARD WRENCH & MFG. CO.

Choice Box 004: Lot of Seven: All metal Monkey Wrenches
(1.) 12" INTERMEDIATE
(2.) 12" BEMIS & CALL / BILLINGS
(3.) 10" TRADEMARK COES (in oval) -10" / BILLINGS - MADE IN USA (with a "B" in a triangle logo). Last Coes type monkey wrench manufactured. (HP66).
(4.) 8" COES WRENCH CO. / MFD UNDER L. COES PAT'S - STEEL (HP58)
(5.) 11.75" 5E / IHC logo (IHC part 8E or 13067D) - - Solid handle variant.
(6.) 11.75" 5E / IHC logo (IHC part 8E or 13067D) - - Open handle variant.
(7.) 9" 1E (IHC part 4E) - - Solid handle variation

Choice Box 005: Lot of Five: Curved Handle, Crescent type Adjustable Wrenches
(1.) 0" Keystone Westcott No. 80 Solid handle.
(2.) 10" Keystone Westcott No. 80. Solid Handle with pipe jaws.
(3.) 8" BARCALO-BUFFALO with open handle.
(4.) 8" Keystone Westcott No. 78. Solid handle. Pitting
(5.) 8" Keystone Westcott No. 78 Solid handle. As found, not cleaned.

PiCs Lots CB 2 thru 5

Choice Box 006: Lot of Three: Self Adjusting Wrenches marked MASTERENCH HELLER BROTHERS CO - NEWARK, NJ - PAT 4-14-1925, 7-5-1927 (with horse logo)  PAT
(1.) 18" size with round hang hole and smooth jaws. Excellent.
(2.) 14" size with square hang hole and serrated jaws. Excellent.
(3.) 10" size with square hang hole and serrated jaws. Good+.

Choice Box 007: Lot of Five: Assorted Wrenches
(1.) Marked only "3" - - 15.5" single ended alligator wrench. Good=.
(2.) FORD (script) 01A-17017B - 57 (Moore logo) - - 9" double hex box end for cylinder head and spark plug on Ford autos and "N" series Ford Tractors. Excellent.
(3.) MAYTAG (script) - - 5.25" gas engine wrench. Type No. 2 with screwdriver end.
(4.) FORD (script) / Moore Drop Forge logo - - 10" Ford Model "T tool kit wrench for sparkplugs and cylinder head.
(5.) WHTIMAN & BARNES / NO. 2 BULLDOG - - 9" single ended alligator wrench. Good++.

Choice Box 008: Lot of Eight: Adjustable Wrench Assortment
(1.) Unmarked - - 7" sliding wedge type quick adjust nut wrench. Good++.
(2.) EAGLE CLAW WRENCH - M. T. CO. (Mechanics Tool Co.) - ROCKFORD, ILL. - PAT FEB 6, 12 (poor markings, not all readable) - - 13" adjustable pliers. Some dings.
(3.) PAT PEND. - MODEL 10 - REINHARD MCCABE CO. - MINNEAPOLIS, MINN - - 10" quick adjust plier wrench. Excellent. (S713, patent not found)
(4.) COCHRAN SPEEDNUT WRENCH - PAT'D MAY 2, 1916 - MADE IN CHICAGO, ILL. USA / PAT'D MAY 2, 1916 - COCHRAN SPEEDNUT WRENCH - - 9" self adjusting nut wrench. Design patented by Walter Taylor of Chicago. Good+, not cleaned. (S320m, C96)  PAT
(5.) Unmarked - - 7.75" unmarked Reed type self adjusting wrench. Light pitting.
(6.) GELLMAN WRENCH CORP. - ROCK ISLAND, ILL USA - POLLY / PATENTED APRIL 17, 1923 - 12 IN. NO. 121 - - 12" size quick adjust nut wrench, external spring variation. Good++, not cleaned.
(7.) GELLMAN WRENCH CORP. - ROCK ISLAND, ILL USA - POLLY / PATENTED APRIL 17, 1923 - 9" IN. NO. 91 - - 9" quick adjust nut wrench, external spring variation. Light pitting
(8.) GELLMAN WRENCH CORP. - ROCK ISLAND, ILL USA - POLLY / PATENTED APRIL 17, 1923 - 6" IN. NO. 61 - - 6" quick adjust nut wrench, external spring variation Pitted.

PiCs Lots CB 6 thru 8

Choice Box 009: Lot of 6: Assorted Wrenches
(1.) DISC / 217 (Massey-Harris) - - 14.5". Good+. (R1-311)
(2.) DISK - - (Janesville Machine Co., Later Samson Tractor Co.) - - 14.5". Good+. (R1-265)
(3.) UNIVERSAL HARVESTER CO - WEST MEMPHIS ARKANSAS - STOCKTON CALIFORNIA - - 8" single hex aluminum wrench. Excellent, like new. (R1-467)
(4.) Unmarked (Deere AR39683) - - 11.25" wheel socket with hex extension. Excellent. (D232)
(5.) Marked only "H" (Ford) - - 8.5". steel Ford Model T Hubcap wrench.
(6.) Unmarked (Hudson and Essex) - - 12.75" pressed steel hubcap wrench

Choice Box 010: Lot of four: Various Farm Wrenches
(1.) 16367 with a Maltase cross logo (orphan) - - 12.5" extra heavy single open ended wrench. Excellent. (not listed, no info found)
(2.) 1126A (Moline Plow Co) - - 6.5" by 10.5"" tee socket wrench. Good++. (R1-332)
(3.) W7 (Blizzard Mfg. Co. - Canton, Ohio) - - 7.25" S-wrench. Good++. (R1-56, R2-36)
(4.) 31 (John Deere / Hart-Carter / Nichols & Shepard-Oliver) - - 8". Marked on left side variation. Good++ with short jaw crack. (D4)

Choice Box 011: Lot of three: Various Wrenches
(1.) F-2372 (Fordson) - 2 (with a "M" in a circle logo) - - 11" double hex socket wrench. Good++.
(2.) CHAMPION - 502 - - 8" double open ended wrench.
(3.) Unmarked 01982AB (Case) - - 11.5" hub cap wrench, stamped steel (R1-78, mistakenly under Case Plow Works listing)

PiCs Lots CB 9 thru 11

Choice Box 012: Lot of six: Wrenches and Fence Tools
(1.) LAKE SUPERIOR WRENCH CO - SAULT STE MARIE, MICHIGAN - - 17.5" self adjusting nut and pipe wrench. Patented 9-7-1909 by William Hilliard Munro of Sault Ste. Marie, Ontario, Canada and 10-4-1910 by John Boulieu of Sault Ste. Marie, Mich. Good++. (S362)  PAT  and   PAT
(2.) Unmarked - - 4.25" in line wire tightener. Like new (Smith 629 "Reel-Tite")
(3.) Unmarked - - 4.25" in line wire tightener. Like new (Smith 629 "Reel-Tite")
(4.) STEVENS & CO. - - 5.25" side adjust bike wrench. Good with some weak markings.
(5.) MFG. BY MAASDAM POW'R-PUILL - BURBANK, CALIF USA - PAT. NO. 2-607-095 - - 7.5" wire grip identical to Smith 760 marked Franklin Wire Grip, Denver, Colo.. Patented by Abraham G. Maasdam of Steamboat Springs, Colo. on Aug. 19, 1952. Good++. (See Smith 760)  PAT.
(6.) STORY STRECHER - BOZEMAN, MONTANA - PATENT 3,020,021 & PAT. PEND. - - 6" main frame part only for a Story Stretcher. Excellent. (see Smith 240)

Choice Box 013: Lot of nine: Assorted Farm Wrenches. Including an Osborne (later IHC) / P167 tee wrench, O (J. D. Tower & Sons - Mendota, Illinois) tee wrench and a B. CO. / 842 (with Illinois Malleable Iron logo) (T. E. Bissell - Elora, Ontario, Canada). The Bissell is in Good++ condition, the others are fair to poor.

PiCs Lots CB 12 and 13

Choice Box 014: Lot of Nine: Fencing Tool Pliers. All are double hammer type.
(1.) Unmarked - - 10.75" Light pitting.
(2.) CRONK - - 10.75".
(3.) Unmarked - - 10" Pitting.
(4.) CRONK - - 10.75". Dings.
(5.) S & H CO.(Smith & Hemenway Co.) 1907 - USA - - 10".
(6.) Unmarked - - 10"
(7.) Vaughan & Bushnell - -10.5". Good++.
(8.) N. S. HDW. CO. (Norvell-Shapleigh Hdw. Co. - St. Louis) DIAMOND EDGE - - 9.5" with unusual offset handle.
(9.) Can't read markings - - 10" Pitted.

Choice Box 015: Lot of Five: Fencing Tool Pliers. All are single hammer and staple puller type.
(1.) GLOBEMASTER 6241C - SPAIN - - 8".
(2.) CRESCENT TOOL CO - 1936-10 - - 10.25"
(3.) EMPIRE 291 - UTICA FORGE & TOOL CORP. - UTICA, NY - - 10.25"
(4.) TRUECRAFT K711B - SPAIN - - 10.5"
(5.) Unmarked - - 10.5"

Choice Box 016: Lot of Six: Cronk Type Fencing Tools
(1.) Utica - - 10.5"
(2.) Unmarked - - 10"
(3.) H. S. B. & CO ((Hibbard, Spencer, Bartlett Hardware Co. - Chicago, Illinois) with Our Very Best - OVB logo - -8"
(4.) ATLAS TOOL CO. - N. Y.9.75" - -
(5.) Unmarked - - 8.25"
(6.) Unmarked - - 9.25". Replaced pivot bolt, notches ground on handle for previous owner's ID.

PiCs Lots CB 14 thru 16

Choice Box 017: Lot of Four: Pressed Steel Type Fencing Tools
(1.) Unmarked - - 9" pliers with wire cutter and hammer. Good++. (Smith 68)
(2.) W. SCHOLLHORN CO. NEW HAVEN, CONN / BERNARD'S PAT. JULY 19, 1892 - SEPT. 25, 1894 - - 9" pliers with wire cutter and hammer. Pitting, dings. (Smith 67)
(3.) W. SCHOLLHORN CO. NEW HAVEN, CONN / BERNARD'S PAT. JULY 19, 1892 - SEPT. 25, 1894 - PARAGON - - 9" pliers with wire cutter and hammer. Excellent. (Smith 67)  PAT. and  PAT.
(4.) Marked only PAT. APR. 23, 01 (poor markings) - - 10" pliers with wire cutter, hammer and specialty jaws (short nose variant) for wire fencing rings. Patented by Charles W. Carter of Rome, Iowa, Good+. (Smith 65)  PAT.

Choice Box 018: Lot of Five: Stillson Type Pipe Wrenches
(1.) 14" size DUNLAP STILLSON WRENCH (a Sears & Roebuck brand). Good+.
(2.) 10" size TRIMO PAT'D. Good++.
(3.) 10" size WALCO PIPE WRENCH - PATENT NO. 1662002. Patent was issued to Alphonse O. Brungardt of Brookline, Mass. on June 07, 1932 Good++.  PAT.
(4.) 10" size GERMANY. Good++.
(5.) 8" size GERMANY. Good+.

Choice Box 019: Lot of Six: Eight Inch Size Wooden Handled Monkey Wrenches
(1.) Dual marked: BILLINGS / Bemis & Call logo - - Knife type handle. Good+.
(2.) Whitman & Barnes logo - - Knife handle. Good+ with former owner's punched ID indentions, tight handle crack.
(3.) Star logo MADE IN USA - WARRANTED- - Knife type handle. Excellent.
(4.) GERMANY - - With bulbous handle. Light pitting, jaws sprung.
(5.) PEXT0 - - with knife type handle. Good+, handle crack.
(6.) BRIDGE TOOL CO. ST. LOUIS USA. Good.

PiCs Lots CB 17 thru 19

Choice Box 020: Lot of Four: Large Coes Wood Handled Monkey Wrenches
(1.) 21" size COES WRENCH CO. / MFD UNDER L. COES PAT'S - STEEL - - With wooden knife type handle. Good+. Marked like HP58 but with wood knife type handle instead of steel).
(2.) 21" size COES WRENCH CO - WORCESTER MASS. / L. COES' PAT'D APR. 30, 1895 - MAY 15, 1900 - - With wooden knife type handle. Jaws slightly sprung, tight handle cracks. (HP51)
(3.) 21" size COES WRENCH CO STEEL BAR - WORCESTER MASS. / L. COES' PAT'D APR. 30, 1895 - MAY 15, 1900 - - With wooden knife type handle. Haven't seen this marking variation before. Edge dings, short, tight handle crack. (like HP51 but also marked STEEL BAR)
(4.) 18" size Coes jog bar type. Markings not readable but shaft is clearly stamped "D. SHULLER 1882" - - Dings, tight handle cracks.

Choice Box 021: Lot of Eight: Adjustable Nut and Pipe Wrenches
(1.) Whitman & Barnes logo - - 8" all metal monkey wrench. Good+.
(2.) Unmarked - -7.5" all metal pipe wrench with angled jaws similar to Lawson pipe wrench. Jaw chips.
(3.) Whitman & Barnes logo - - 6.5" all metal monkey wrench. Plated finish. Good+.
(4.) GIRARD SPECIAL - SIZES 6 TO 21 - IN STOCK BY CRERAR ADAMS & CO. - CHICAGO, ILL / GIRARD SPECIAL - - 6" Rare promotional all metal monkey wrench. Plated finish. Some light pitting. (not listed)
(5.) MADE IN GERMANY - - 5.75" wood handle monkey wrench. Poor, poor handle, no handle nut.
(6.) GERMANY - - 6" wood handled monkey wrench. Good+.
(7.) MADE IN GERMANY - - 6" wood handle monkey wrench. Excellent.
(8.) Whitman & Barnes - - 10" wood handled monkey wrench with ridged adjusting screw end. Handle crack..

PiCs Lots CB 20 and 21

Choice Box 022: Lot of Eleven: Blacksmith Tongs. Some unusual types. 12" to 27".

PiCs Lot CB 22

Choice Box 023: Lot of Five: Trimo Nut Wrenches
(1.) 18" size all metal 12-19-1911 patent type, stamped N.Y.C.R.R. (New York Central Railroad). Has an attached pipe jaw adapter. The adjusting nut guard washer is missing.
(2.) 12" size all metal with the U-shaped adjusting nut guards.
(3.) 10" size with wood slab knife type handles. Some light dings.
(4.) 8" size all metal with the U-shaped adjusting nut guards.
(5.) 6" size all metal 12-19-1911 patent type. The adjusting nut guard washer is missing

Choice Box 024: Lot of Three: Large Wooden Handled Monkey Wrenches
(1.) 15" size A. G. COES & CO. WORCESTER, MASS / PAT. MAY 2, 71 & DEC 26, 71 (with steam engine governor logo) - - Jog bar type. Good+. (HP21)
(2.) 15" size COES WRENCH CO - WORCESTER, MASS / MECHANICS WRENCH IMPROVED - JAN 1, 1882 and stamped PATT SHOP on the shaft. - - Jaws sprung, mushrooming, dings, handle cracks. (HP46)
(3.) 15" size BEMIS & CALL COMPANY - - Combination nut and pipe wrench with threaded shaft and long adjusting sleeve. Good+

PiCs Lots CB 23 and 24

Choice Box 025: Lot of Six: Blacksmith tongs. Some unusual types.

Choice Box 026: Lot of Six: Various Farm Tools. Including an extra long livestock marker, pig forceps, gas pliers, odd tongs, and a couple What's It's.

PiCs Lots CB 25 and 26

Choice Box 027: Lot of Eight: Farm, Etc. Wrenches. As found, not cleaned.
(1.) Klein (with lineman climbing pole logo) - - 13.5" lineman's lag bolt wrench.
(2.) Unmarked (Deere D1083R) - - 13". Pitted. (D293)
(3.) LACKAWANNA - 3/4 - 5/8 (same markings both sides) - - 13.5" double open end S-wrench. Some pitting.. (not listed, no info found)
(4.) Unmarked - - 12" extended hex socket with round handle hole on other end.
(5.) G1 (Oliver / IHC Canada) - - 12.25". Pitted.
(6.) M-H (Massey-Harris) - - 6.5" stamped steel. Polished, jaw crack, grind marks.
(7.) UA27A - - 6.25" Wisconsin gas engine hand crank.
(8.) DREIS & KRUMP MFG CO CHICAGO ILL - - 12.5". Heavy, thick wrench with six openings. Pitted, not all markings are readable. (R1-151)

Choice Box 028: Lot of: Nine Farm, Etc. Wrenches. As found not clamed.
(1.) MONITOR DRILL / A270 (Monitor Drill Co. - Minneapolis, Minn., later Moline Plow Co.) - - 6.75". Some pitting. (R1-334)
(2.) NO. 2B / "A" in a triangle logo Armstrong Brothers Tool Co. of Chicago, Illinois - -11" three opening lathe wrench?
(3.) 2097 (Fordson tractor) - - 10.75" rear wheel pry bar. Pry bar end has minor chips. (R1-180)
(4.) 5994T - Case Eagle logo (Case T. M. Co.) - - 8.5". Tee socket wrench. Pitting.
(5.) Fordson tractor hubcap wrench - - 1-.75". Poor has been used as a hitch pin.
(6.) SHARPLES SEPARATOR CO / TUBULAR - - 7.75" double spanner. Poor
(7.) W. P. Co. 94 (Wiard Plow Co. - Batavia, NY) - - 11". Good+. (R1-488)
(8.) P1599 - IHC logo - - 12,75". All marking debossed.
(9.) ANCHOR STEEL STRAPPING - - 8" strapping tool.

PiCs Lots CB 27 and 28

Choice Box 029: Lot of Twelve: International Harvester Wrenches

Choice Box 030: Lot of Eleven: International Harvester Wrenches:

Choice Box 031: Lot of Twelve: Farm Implement Wrenches. Fair to good condition

PiCs Lots CB 29 thru 31

Choice Box 032: Lot of Eight: Farm Wrenches
(1.) J. I. CASE PLOW WORKS - 4105 - 9.5"
(2.) Can't read markings - - 9". Looks like T. E. Bissell wrench.
(3.) SHARPLES SEPARATOR CO / TUBULAR - - 5.5" soe.
(4.) STOWE IMP, SUP. CO. - K.C. MO. (Stowe Implement Supply Co.) - -10" doe-s.
(5.) MOLINE DRILL - - 8.5". Severe pitting.
(6.) FORDSON - 2 - - 6" doe.
(7.) FORDSON - 2 - - 6" doe.
(8.) FORDSON - 1 - - 6" doe.

Choice Box 033: Lot of: Seven Farm Wrenches
(1.) VAN BRUNT (John Deere) - - 7". As found, not cleaned.
(2.) VAN BRUNT (John Deere) - - 7". Bent, pitted.
(3.) JD-50 - - 6".
(4.) 6900C with John Deere logo "JD" - - 2.75" cast What's It.
(5.) W1795 / E-B logo (Emerson-Brantingham) - - 10"
(6.) 178 (Adams) with dogbone logo - - 6.5". Pitted. (R2-2)
(7.) MORRISON MF'G CO. - - 10". Pitted,

Choice Box 034: Lot of Eight: Farm Wrenches
(1.) L9 (IHC)- - 8.25". Six round hole, raised markings variation. Good++.
(2.) J H CO / 218 (Johnston Harvester / Massey-Harris) - - 9.25". Two open ends variant. Good+.
(3.) DAIN / L136E (Deere) - - 7.75". Severe pitting.
(4.) Unmarked - - 8" Hercules and Economy gas engine wrench. Pitted.
(5.) M182 (Litchfield Mfg. Co., Waterloo, Iowa) - - 9". Good++.
(6.) MOLINE PLOW CO / H.X.5+ - - 10.5". Good+.
(7.) FULLER & JOHNSON / 2P30 - - 9". Excellent. Two square box openings variant. Pitted. (R1-191)
(8.) 11 (Gale) - - 8.25". Pitted.

PiCs Lots CB 32 thru 34

Choice Box 035: Lot of: Seven Farm Wrenches
(1.) INDIANA SILO CO (Anderson, Indiana) - 5/8 - - 11". Painted, light pitting.
(2.) M182 (Litchfield Mfg. Co., Waterloo, Iowa) - - 9". Good++.
(3.) CHAMPION (slanted letters) (No. R28, later IHC) - - 8.75". Not marked with the part number, no hang hole variation. Pitting.
(4.) J. M. CO (Janesville Machine Co. - - 9.25". No dot variation. Good+.
(5.) Unmarked - - 8.26" square box end. Good++.
(6.) 106 (B. F. Avery - Louisville, KY and Moline Plow Co.) - - 8". Good..
(7.) J H CO / 218 (Johnston Harvester / Massey-Harris) - - 9.25". Three open ends variant. Good+.

Choice Box 036: Lot of: Nine Farm Wrenches
(1.) PLANET JR. / 3 - MADE IN THE UNITED STATES OF AMERICA - - 6.25" with hammer head. Excellent with original finish.
(2.) Z810 (McCormick, later IHC) - - 7" pitman wrench. Markings raised. Good+/
(3.) FORD (script) - - 5.5" doe.
(4.) N9 / Link Belt's dogbone logo (orphan) - - 5.75".
(5.) 2335B with Eberhard's "E" in a circle logo / PAT"D = = 6.75" doe-s. Good+.
(6.) 285 (Valle & Kimes, Dayton, Ohio) - - 4.24" open end X hex box X square socket. Good++.
(7.) STANDARD - - 6"
(8.) A944 (Superior Drill Co) - - 6.5" combination socket, pry bar and hook ends. Good++, markings stronger than usually found.
(9.) DEERE - - 6.75" steel. Over cleaned.

Choice Box 037: Lot of: Seven Farm Wrenches
(1.) D.203 (Moline Plow Co.) - - 8.5". No star logo variant. Excellent.
(2.) W459 (orphan) - - 7.5" single square box end. Good++. (not listed, no info found)
(3.) GALE 26 (Gale Mfg. Co. - Albion, Mich.) - - 10". Severe pitting.
(4.) C111 (Roderick Lean - Mansfield, Ohio) - - 8". Severe pitting.
(5.) Unmarked - - 5.5" x 9.5" Oddball L-shaped with three open ends. Three more and you have a nice picture frame. Pitted.
(6.) ROCK ISLAND / R1123 - - 7.5".
(7.) EMERSON - - 10"

PiCs Lots CB 35 thru 37

Choice Box 038 Lot of: Six Farm. Etc. Wrenches
(1.) Unmarked - - 12.5". Like Dreis & Krump wrench. (see R1-151)
(2.) THE CHARLES PARKER VISE CO - MERIDEN, CONN. / VISE WRENCH NO. 2 - - 6".
(3.) Unmarked - - 6" hook or jaw,
(4.) WOOD (Walter A. Wood Mower & Reaping Machine Co. - Hoosick, Falls, NY) - - 11.2"
(5.) P28 (Plano / IHC) - - 8.5"
(6.) C (Janesville Machine Co., Later Samson Tractor Co.) - - 7". Pitted,

Choice Box 039: Lot of: Six Farm Wrenches
(1.) CYLINDER STUD NUT - DELCO-LIGHT / ARMATURE PULL NUT 28282 (with a "D" in a circle logo) - - 8".
(2.) L298 with a double diamond logo (New Idea Spreader Co. - Coldwater, Ohio) - - 7.75".
(3.) R197 (McCormick- / IHC) - - 8".
(4.) 4106 (Massey-Harris, earlier Case Plow Works) - - 8". with hammer. Some pitting.
(5.) CYLINDER STUD NUT - DELCO-LIGHT / ARMATURE PULL NUT 28282 (with a "D" in a circle logo) - - 8".
(6.) A375 / "U" logo (Hayes Pump & Planter Co. - Galva - ILL.) - - 3.75" by 5.75". Pitting.

Choice Box 040: Lot of: Seven Farm Wrenches
(1.) A (Janesville Machine Co., Later Samson Tractor Co.) - - 12.5"
(2.) Unmarked - - 14.5" tee handled hex socket wrench.
(3.) RODERICK LEAN (Mansfield, Ohio) - D44 - 10" by 15" tee socket wrench with center hex . Good++.
(4.) DISK - - (Janesville Machine Co., Later Samson Tractor Co.) - - 14.25". Edges hammered.
(5.) INDEPENDENT / SP115 - "CH" logo - - 7.25". Rusty, not cleaned.
(6.) Unmarked (orphan) - -18.75" heavy duty open end crow foot wrench.
(7.) AMERICAN HARROW CO. - DET. MICH./ DD198 - - 13.25". Pitting.

PiCs Lots CB 38 thru 40

Choice Box 041: Lot of: Seven Farm Wrenches
(1.) W1074 / E-B logo (Emerson-Brantingham, Rockford, ILL) - - 16.25". as found, not cleaned.
(2.) 883 - J. I. CASE PLOW WORKS (later Massey-Harris) - - 14.5". Painted.
(3.) 883 (Case Plow Works / Massey Harris) - - 14.75". Painted.
(4.) W402 (Emerson-Brantingham, Rockford, ILL. Later Case T. M. Co.) - - 17". Good, not cleaned.
(5.) 4359 (P & O, later IHC) - - 12.75". Painted, edge mushrooming.
(6.) BAILOR PLOW CO / ATCHISON KAN. C49 - - 9.5". Some pitting.
(7.) D138 (Chattanooga Plow Co. / IHC / David Bradley) - - 12.75". Disk straightening slot at 90°. Painted, pitted.

Choice Box 042: Lot of: Nine Farm Wrenches
(1.) unmarked (John Deere Model B tractor wrench B596R) - - 12". Good++. (D258)
(2.) APPLETON MFG. CO. - BATAVIA ILL. USA / C620 - - 10". Good+. (R1-21)
(3.) Can't read markings - - 10.5" farmer's s-type wrench. Pitted, painted.
(4.) 5089 (Avery Co. - Peoria, ILL) - - 10" Tee socket wrench, four socket variant. Painted.
(5.) LG276 (Emerson-Brantingham, later Case T. M. Co.) - - 8.5" Tee socket wrench. Good++, painted.
(6.) VAN BRUNT / D380 with JD logo - - 7". Painted, green.
(7.) Unmarked - - 8.75" - - extended hex socket with handle hole. Painted.
(8.) TIRE CARRIER WRENCH / 678225 (with backward "S" logo) (Studebaker Truck wrench) - - 9" Good++, painted.
(9.) 138 (Eagle Mfg. - Kansas City, MO and Dallas, TX) - - 7.75" with small hammer head Pitted, painted.

PiCs Lots CB 41 and 42

Choice Box 043: Lot of: Nine Flat Case and Deere Wrenches
(1.) CASE 031W - - 11.5".
(2.) CASE 029W - - 10.25".
(3.) CASE 028W - - 9".
(4.) CASE 027W - - 7.5".
(5.) CASE 025W - MADE IN USA - - 5.75".
(6.) DEERE / DEERE - - 11.25".
(7.) DEERE / DEERE - - 11.25". Reverse marking than above.
(8.) DEERE / DEERE - - 9".
(9.) DEERE - - 6.5".

Choice Box 044: Lot of: Eight Automotive Tools
(1.) WEED - PAT'D JUL 29, 1913 - JUNE 1. 1915 50¢ - - 10" tire chain tool. Patented by Fredrick Strong of Bridgeport, Conn. and Thomas C. Luce of Stratford, Conn.  PAT. and  PAT.
(2.) WEED - PAT'D JUL 29, 1913 - JUNE 1. 1915 60¢ - - 10" tire chain tool like No, 1 above but marked 60¢ vs. 50¢.
(3.) Unmarked - -9.25" combination tire weight tool? With hammer head. Excellent.
(4.) ZIM MFG. CO - CHICAGO - PAT. PEND. - - 8" valve adjusting tool.
(5.) WATER PUMP PACKING NUT - - 5,75" flat steel face spanner.
(6.) VALVE TAPPET ADJUSTING NUT WRENCH - - 6.75" flat steel.
(7.) VALVE TAPPET ADJUSTING WRENCH - SCREW AND NUT - - 7.75" flat steel.
(8.) Unmarked - - 9.25" hex box by large open end.

Choice Box 045: Lot of: Six Misc. Wrenches
(1.) GOSS - GLENSHAW, PA - - 7" flat steel welding wrench.
(2.) GLOBE-J - - 8.75" fire sprinkler wrench.
(3.) Unmarked - - 12" hinged What's It.
(4.) CURRIE TOOL WORKS P. O. BOX 1037 DETROIT, MICH. - PAT. PEND. - -12.75" oddball wrench with rethreading die.
(5.) AMERICAN PIPE TOOL/ CHICAGO - - 6" heavy cast What's It. Excellent.
(6.) TRI-SURE - NEW YORK - - 5.75" aluminum barrel bung wrench? Excellent.

PiCs Lots CB 43 thru 45

Choice Box 046: Lot of: Seven Garden Cultivator Type Wrenches
(1.) Standard (Standard Garden Tool Co. - Montrose, Iowa)
(2.) PLANET JR. 3 (S. L. Allen & Co. - Philadelphia, Penn.)
(3.) M23 (orphan)
(4.) Unmarked (orphan) - - With eight square cutouts on shaft.
(5.) B14 (orphan) Six square cutouts on shaft variant
(6.) B14 (orphan) Six square cutouts on shaft variant
(7.) Standard (Standard Garden Tool Co. - Montrose, Iowa)

Choice Box 047: Lot of: Seven Garden Cultivator Type Wrenches
(1.) Unmarked
(2.) Standard (Standard Garden Tool Co. - Montrose, Iowa)
(3.) B14 (orphan) Six square cutouts on shaft variant
(4.) Standard (Standard Garden Tool Co. - Montrose, Iowa)
(5.) B14 (orphan) Six square cutouts on shaft variant
(6.) X59 (orphan)
(7.) 1AA (Brown-Manly Plow Co. - Malta, Ohio)

Choice Box 048: Lot of: Seven Garden Cultivator Type Wrenches
(1.) 1AA (Brown-Manly Plow Co. - Malta, Ohio)
(2.) Unmarked
(3.) B14 (orphan) Six square cutouts on shaft variant
(4.) 9, (orphan)
(5.) PLANET JR. 3 (S. L. Allen & Co. - Philadelphia, Penn.) with CUTOUT letters.
(6.) Standard (Standard Garden Tool Co. - Montrose, Iowa)
(7.) B14 (orphan) Six square cutouts on shaft variant

PiCs Lots CB 46 thru 48

Choice Box 049: Lot of: Six Farm Type Wrenches
(1.) Unmarked - -12" six opening Farmer's Style S-wrench. Painted, pitting.
(2.) Unmarked - -12.25" six opening Farmer's Style S-wrench. Poor, pitted.
(3.) WOOD (Walter Wood - Hoosick Falls, NY) - - 11". Poor, pitted. (R1-494)
(4.) P17 (Stoddard - Dayton, Ohio) - - 7.75". Poor, pitted. (R2-270)
(5.) Marked only "2" - - 7.5" oddball with hammer head. Similar to Whitman & Barnes Cultivator wrench. Poor, painted, pitted.
(6.) Unmarked - - 5.25". Similar to known beer tap wrenches. Excellent.

Choice Box 050: Lot of: Seven Farm Wrenches
(1.) 90258 (Delco Light Plant) - CONN. ROD NUT / CYL. HEAD - COVER PLATE - - 6.75". Good++.
(2.) MONITOR DRILL / A763A (Monitor Drill Co. - Minneapolis, Minn., later Moline Plow Co.) - - 8.5". Painted, some pitting. (R1-334)
(3.) Can't read markings - -6" cast double square socket. Pipe wrench marks on shaft.
(4.) L297 (New Idea Spreader Co. - Coldwater, Ohio) with a double diamond logo. - - 5.75". Good+. (R1-349)
(5.) OK1294 - Case Eagle logo (Case T. M. Co.) - - 9". H-shaped with pitman flange. The "goal post wrench". Orange paint. (R1-82).
(6.) 2699TM (IHC) - - 4.75" very early heavy cast spark plug socket. Fair with faint markings, some pitting.. (R1-251)
(7.) T G MANDT WRENCH 10 - PAT JUNE 13 1896 (T. G. Mandt Mfg. Co. - Stoughton, Wis. - later Moline Plow Co.) - - 10." wagon hub wrench and hitch pin. No star logo variation. Applicable patent was issued to William John Leach of Brighton, Wisc. on Jun. 30, 1896. Painted and nut holding spring is missing. (S215, R1-307, C210)  PAT

Choice Box 051: Lot of: Five Oddballs and Orphans
(1.) Marked only "81" and a "W" in a circle logo (orphan) - - 10" cross-shaped oddball with three open ends and a square socket. Painted, jaw crack.. (Rathbone's Oddball Page R1-504)
(2.) Unmarked (orphan) - - 5" cast soe with open handle.
(3.) Unmarked - - 9" thick, crude. Shop made,
(4.) Unmarked - - 10.25", Thick soe, Original paint?.
(5.) Unmarked - - 9.75". Thick doe.

PiCs Lots CB 49 thru 51

Choice Box 052: Lot of: Seven Hay knives and Miscellaneous Saws.
(1.) Unmarked - - 46" hay knife.
(2.) Unmarked - - 30" limb or ice saw with cast iron handle.
(3.) ARROW BRAND logo - - 43.5" hay knife with wooden handle.
(4.) Unmarked - - 34" hay knife with cast iron and wooden handles.
(5.) Unmarked - - 37.5" hay knife with wooden handles.
(6.) GEO. H. BISHOP & CO. - - LAWRENCEBURG, IND - 75N - - 29.5" butcher's saw with wooden handle and different cast blade lock.
(7.) GREAT NECK SAW MFRS - MINEOL:A, NY NO. 325 / PAT'D 176770 - - 19.5" hack saw with chain saw blade and two sparkplugs. Apparently an early gas powered chain saw with spme parts missing. May be a patent model or prototype?.

PiCs Lot CB 52

Choice Box 053: Lot of: Seven Farm Wrenches
(1.) FORDSON - N-17029 - with a VBW - Staffordshire Knot logo - - 10,25" hubcap wrench with beveled handle and open hex end. Usually seen marked ENFO for English Ford rather than Fordson. Hang hole attachment welded to end and modified jaw opening. painted. (similar to R1-180)
(2.) Wheelers / Self Rake (Cayuga Chief - Auburn, NY, Osborne, IHC) - - 11". Jaw broken off, (R1-486)
(3.) TAGUE & KERLIN WRENCH / MIDLAND MFG. CO. - TARKIO MO. USA - 2 - - 8.75". Pitted. (R1-326)
(4.) SAMSON - 1892 - FOR WRIST PIN ONLY / FOR FRONT CAP BOX ONLY (Stover Mfg Co) - - 7.25" Stover Samson Windmill wrench. Severe pitting.
(5.) 260 FT MADISON PLOW CO - - 10". Some pitting, painted. (R1-189)
(6.) BUFORD / C1 *Buford & Co.. - Rock Island, IL.) - - 8". Severe pitting. (R1-70)
(7.) Unmarked (orphan) - - 7.75" oddball with hammer head. Looks similar to the Gale and P. P. Mast C20 wrench but with a more prominent hammer head. Severe pitting. (see R1-193. R!-314).

Choice Box 054: Lot of: Seven Farm Wrenches
(1.) HH (orphan, possibly Badger Cultivator) - - 9.75". Some edge hammer damage. (not listed, no info found)
(2.) 286 (Blount Plow Works, Evansville, Ind.) - - 10" multi-opening wrench, no wing nut opening variant. Poor, pitting, jaw crack.. (R2-37)
(3.) K232 (Kingman Plow Co. - Peoria, Illinois) - - 9". Fair, not cleaned. (R1-284)
(4.) CHASE PLOW CO (Lincoln, Neb.) - - 10.25". No part number variation. Good+, few minor dings. (R1-97)
(5.) ROCK-ISLAND - - 6.75" flat steel. Good++.
(6.) MIDLAND MFG. CO. / 1 - TARKIO MO. USA - - 8.75". Poor, severely pitted. (R1-326)
(7.) MOLINE DRILL / A1037 - - 8.5". Yellow paint.. (R1-332)

Choice Box 055: Lot of: Six Farm Wrenches
(1.) 11 (Grand Detour Plow Co. - Dixon, IL.) - - 14". Edge hammer damage. (R3-94)
(2.) LA CROSSE PLOW CO - K29 / (ruler markings) - - 14.25". Severe pitting, edge crack. (R1-289)
(3.) K29 (La Crosse Plow Co. - La Crosse, Wisconsin) / (ruler markings) - - 14.25" . Number only variant. Pitted. (R1-289)
(4.) 95095 (Delco Light Plant) - CYLINDER NUT / CONNECTING ROD SCREW - 6 - - 8.25". Good++.
(5.) C28 (David Bradley ?) - - 17.5". Pitted. (R1-126)
(6.) Unmarked - - 13". Cast hex box riveted to steel bar with crow nail puller end. Poor with pitting and hammer edge damage.

PiCs Lots CB 53 thru 55

Choice Box 056: Lot of: Seven Oddballs and Orphans

Choice Box 057: Lot of: Five Assorted Wrenches
(1.) 976 J. H. WILLIAMS & CO. - BROOKLYN-BUFFALO, U.S.A. - 3/4 - 7/8 Also marked (Chicago, Rock Island & Pacific Railway) - - 21" double opened s-wrench. Good++.
(2.) Whiteman & Barnes logo / No. 3 - - 15.75" single ended alligator wrench. Good++.
(3.) FRISCO SYSTEMS / FRISCO SYSTEMS (St. Louis-San Francisco Railway Company) - - 23". doe-S wrench. Excellent.
(4.) H. D. SMITH PERFECT HANDLE, Etc. - -18" knife type wooden handle monkey wrench. Painted., rough handle.
(5.) Unmarked - -21" knife type wooden handle monkey wrench. Adjustment is stuck.

PiCs Lots CB 56 and 57

Choice Box 058: Lot of: Seven International Harvester Wrenches
(1.) H4649 (IHC) - - 9.25". Unlisted variation marked on shaft, no IHC logo. Area with edge damage.
(2.) J1506 - J1507 with IHC logos - - 16" ratchet. Offset handle variant. Good++. (R1-254)
(3.) G3170 with IHC logo - - 11.25". Irps' Type 13. Good++.
(4.) S-1 (Milwaukee, later IHC) - - 7.25". Numbers debossed (indented) on end variation. Good++.
(5.) S110 - IHC logo (No IHC logo variation) - - 6" tee handled socket wrench. Good++.
(6.) 5082T (IHC)- - 6" double socket listed for early International Trucks and Gas Engines. Weak markings. (R1-251)
(7.) 1692T (IHC) - - 10" double spark plug socket listed for Mogul, Titan and other IHC early tractors and gas engines. Poor with pitting, unreadable markings. (R1-251)

Choice Box 059: Lot of: Six Misc. Wrenches
(1.) Unmarked (orphan) - -7.75" flat steel with painted markings "CHAPMAN".
(2.) Unmarked (orphan) - - 5.25" extra thick doe.
(3.) Unmarked (orphan) - - 6.75" double socket. Painted.
(4.) 213 (Walter Wood - Hoosick Falls, NY) - - 6.75" cast socket extension. Markings are very faint. (R2-300)
(5.) Unmarked (looks like Dempster C146 wretch) - - 8.5". Pitted. (see R1-143)
(6.) Unmarked (orphan) - - 9". Pitted.

Choice Box 060: Lot of: Five Wrenches and Cranks
(1.) UA27A - - 6.25" Wisconsin gas engine hand crank.
(2.) HZ160 / ("U" logo) (Deere) - - 10" binder wrench and crank. Markings on two lines variation. Pitted. (D335)
(3.) 3928G (orphan) - - 12" crank.
(4.) AIRCO / 8090028 - - 8.5" welding wrench.
(5.) Mossberg NO. 373 - 1-1/4 & 1-7/16 - - 13". Green paint.

PiCs Lots CB 58 thru 60

Choice Box 061: Lot of: Seven Lineman and Fire Truck Wrenches
(1.) PT19A - - 15.25" fire truck wrench with hose coupling spanner and five sided box end. Good++.
(2.) CP301 - C. P. CONS???? (poor markings, not readable - - 11.5" lineman's wrench?
(3.) M. KLEIN & SONS / CAT. 3146A BELL SYSTEM B 1-66 - - 12.75" lineman's lag screw wrench. Excellent.
(4.) KLEIN & CO. with lineman climbing pole logo - - 14" lineman's lag screw wrench. Good++.
(5.) W. U. TEL. CO (Western Union Telegraph Co,) - - 13.5" lineman's lag screw wrench. Good++.
(6.) BELL SYSTEM S - - 13" Lineman's lag screw wrench. Good++.
(7.) M. KLEIN & SONS / CAT. 3146 - - 12.75" Lineman's lag screw wrench. Good++, painted.

Choice Box 062: Lot of: Five Assorted Wrenches
(1.) Unmarked (South Bend Chilled Plow Co. - South Bend, Indiana) - - 15.75" plainer version of South Bend's "Octagon" wrench. Used on South Bend's New Casaday Sulky Plows. Jaw corner crack. (R2-267)
(2.) 01982AB (Case T. M. Co. - - 13" tractor hubcap wrench. Flat variant. Light pitting.. (R1-78, mistakenly under Case Plow Works listing)
(3.) BOSCO FORMSTER / ICE CHICAGO / PATENTED - - 14.5" What's It.
(4.) Unmarked (Packard hubcap wrench) - - 10". Pitted.
(5.) LETZ - E782 (Letz Mfg. Co. - Crown Point, Indiana, later Deere) - - 7" Deering pattern. Good+. (D308)

PiCs Lots CB 61 and 62

Choice Box 063: Lot of: Six Pliers Type Wrenches
(1.) GREAT GRIP - EASY ACTION / PAT. NO. 2705899 (April,12, 1955 by Harold A. Berger of Plano, IL. - - 9" Vise Grip type locking pliers. Good Plus.
(2.) GLOBEMASTER NO, 63260 - JAPAN - 10" GRIP - - 9" Vise Grip type locking pliers with lock release lever. Good++.
(3.) EIFEL-GEARED PLIERENCH - 8-1/2"-'44-_4 (1944 date code) PAT. NOS. - 1181654 - 1862817 - MADE IN USA BY AMER. PLIERENCH CORP'N - CHICAGO, ILL, - FORGED - LOCKS THIS WAY - - 8.5" later Plierench with screwdriver on end of handle. Good++.  PAT  and  PAT
(4.) EIFEL-FLASH PLIERENCH - PAT 5.2.16 - FLASHS'L'S CHICAGO - - 9" early type Plierench with straight jaw gears. May 5, 1916 patent was granted to Joseph Eifel of Chicago, ILL. Good+..(S272)  PAT
(5.) J. P. DANIELSON CO. INC. - JAMESTOWN, N.Y. MADE IN USA - - 8" slip joint pliers. Good.
(6.) FORD (script) - - 6" slip joint pliers. Pitting.

Choice Box 064: Lot of: Eight Adjustable Wrenches
(1.) 14 IN. EVER GRIP - MADE IN USA / PATENTS PENDING - - 14" turn handle to adjust wrench with serrated jaws. Pat. 9-7-1915 by William Estes of Ozark, Missouri. Good++. (S626)  PAT
(2.) LITTLE GIANT - 14 -PAT FEB-4-1913 / GREENFIELD, MASS. USA (with a GTD logo) - - 14" pipe wrench with reversible upper jaw. Patented by Addison B. Carll of Boothwyn, Penn. (he also had the patent for the Carll reversible jaw Crescent type wrenches). Rusty, pitting. (S600)  PAT
(3.) LAKE SUPERIOR WRENCH CO - SAULT STE MARIE, MICHIGAN - - 13" self adjusting nut and pipe wrench. Patented 9-7-1909 by William Hilliard Munro of Sault Ste. Marie, Ontario, Canada and 10-4-1910 by John Boulieu of Sault Ste. Marie, Mich. Handle is slightly bent. (S362)  PAT  and   PAT
(4.) NO. 11 - REED MFG. CO. - ERIE, PA. USA. / PAT. AUG. 10, 97 - - 10.75" self adjusting pipe wrench, replaceable lower jaws inserts variant. Patented by Albert Katzki of Erie, PA. Rusty, jaw insert and upper jaw tip have damage. (S334)  PAT
(5.) FORDSON - THE KEYSTONE MFG CO / BUFFALO NY USA - 10 INCH NO 80 - - 10.25" curved handle Crescent type wrench, Fordson Tractor tool box wrench. Painted, some edge hammer damage.
(6.) J. H. WILLIAMS & CO. - BUFFALO, NY / NO. 474 ADJUSTABLE SPANNER - - 10". Good++.;
(7.) A1 - COCHRAN SPEEDNUT WRENCH - PATENT PENDING./ PATENT PENDING - COCHRAN "SPEEDNUT" WRENCH - - 9" self adjust nut wrench. Design patent was issued to Walter W. Taylor, Chicago, ILL. Good+. (similar to S320, C283)  PAT
(8.) CHICAGO MFG. & DISTRIBUTING CO. - CHICAGO / PATENTED MARCH 10, 1914 ("CH" logo) - - 9" malleable ratchet with a 8.75" cast socket extension marked "A25".. Patent issued to Gordon K. Wright of Hinsdale, Illinois. Good++.  PAT

Choice Box 065: Lot of: Seven Adjustable Wrenches
(1.) BILLINGS & SPENCER - HARTFORD, CONN. (with the "B" in a diamond logo) - -7.75" adjustable automotive type wrench. Adjusting gear has some broken threads.
(2.) F. H. AYER MFG. CO. - CHICAGO HEIGHTS, ILL. - PAT SEP. 9, 1913, SEP. 26, 1916 (weak markings, not all are readable) - - 7" ratcheting sleeve type wrench with 1/2" female drive with a universal flex socket adapter,. Patents were issued to Frederick H. Ayer of Chicago Heights, Illinois. Ratchet has a crack on the end of the socket holder.  PAT. and  PAT.
(3.) THE ELGIN PAT JUNE 8, 97 - EXTRA JAW 25¢. - - 7" adjustable alligator wrench, die holder type. Fair
(4.) THE ELGIN PAT JUNE 8, 97 - EXTRA JAW 25¢ - - 7" adjustable alligator wrench, die holder type. Fair
(5.) Severely pitted and adjustment frozen Baxter Diagonal double ended wrench - - 8.5"
(6.) B & C (Bemis & Call) - - 6" curved handled Crescent type, open handle variation.
(7.) Unmarked - - 5.75" adjustable bicycle wrench. Rusty.

PiCs Lots CB 63 and 65

Choice Box 066: Lot of: Seven Shop Made Tools - Including several wrenches, a large hook with wooden handle and as neat small tongs.

Choice Box 067: Lot of: Seven Shop Made Alligator and Open End Wrenches - Several were made from files.

PiCs Lots CB 66 and 67

Choice Box 068: Lot of: Five Early Automobile Hubcap Wrenches
(1.) 5525 (orphan) - - 13" cast. Similar to 2753 Durant hubcap wrench.
(2.) Unmarked (Dodge Bros.) - - 9.25".
(3.) Unmarked (Hudson-Essex)- - 12.75" steel.
(4.) Unmarked (orphan) - - 11". Steel.
(5.) 15086 (orphan) - - 12". Cast.

Choice Box 069: Lot of: Four Early Steel Automobile Hubcap Wrenches. All unmarked.

Choice Box 070: Lot of: Five Early Automobile Hubcap Wrenches
(1.) 16B8350 (orphan) - - 10.5". Cast. Excellent.
(2.) 2BY26 (Orphan) - - 11". Cast. Excellent.
(3.) Unmarked (orphan) - - 8.75". Steel.
(4.) Unmarked (orphan) - - 8.75". Steel.
(5.) Unmarked (Chevrolet) - - 10.5". Steel Chevy hubcap and water pump wrench (1929-1933)

PiCs Lots CB 68 thru 70

Choice Box 071: Lot of: Six Fencing Tools
(1.) Unmarked - - 10" Cronk type fencing pliers with two cutters.
(2.) CRECENT TOOL CO. - - 10.5" fencing pliers with hammer, staple puller, cutters, etc.
(3.) CHANNELLOCK - 85 - MEADVILLE, PA. USA - - 10.5" fencing pliers with hammer, staple puller, cutters, etc. Has plastic coated handles.
(4.) NEPTUNE MFG. CO. LOSANGELES - - 12" What's It similar to No. 3 above. Good++ with original paint.
(5.) BEND WIRE LEFT / TURN WRENCH RIGHT - - 12.5". Good++, original paint.
(6.) Unmarked - - 7" cast fence post topper.

Choice Box 072: Lot of: Six Farm Wrenches
(1.) Avery / 251 (Avery Co. - Peoria, ILL) - - 7.25". Good+. (R1-26)
(2.) SHARPLES SEPARATOR CO / TUBULAR - - 5,75" single open end. (R1-422)
(3.) 901A (orphan) - - 8.5".. Pitting.
(4.) 12 (Gale Mfg. Co. - Albion, Mich.) - - 9.5". Pitted.
(5.) Marked only "3" (orphan) - - 8".
(6.) 274A (Massey-Harris) - - 8.5". Painted. (R1-311)

Choice Box 073: Lot of: Six Farm. Etc. Wrenches
(1.) 1022 SPECIAL - - 18" forged wrench with 2-1/8" single open end.
(2.) Markings not readable - - 9.75" oddball. Sometimes found faintly marked BUICKEYE WRENCH. pitting. (See Buckeye Mower & Reaper Co, Akron, Ohio - R2-44)
(3.) 4271 (Avery gas tractor, Peoria, ILL) - - 10.75". Good++, weak markings as usually found.(R2-18)
(4.) Marked only "2" - - 7.5". Looks like Whitman & Barnes Cultivator Wrench. Severe pitting.
(5.) CTK. MFG. CO. (Chicago Tool Kit Mfg. Co.) / SP1 - - 8.25". Good++. (see R1-74, R2-106)
(6.) Unmarked - - 8.75" hitch pin with three wrench openings. Looks like (George W. Brown and Wheel & Seeder Mfg. Co. wrench. Pitted. (see R1-66, R1-485)

PiCs Lots CB 71 thru 73

Choice Box 074: Lot of: Five Farm, Etc. Wrenches
(1.) THE OHIO CULTIVATOR CO (Bellevue, Ohio) / DA32 - - 15.75". Jaw corner crack. (R1-357)
(2.) LA CROSSE / ND86 - - 9". Pitted. (R1-289)
(3.) 533 (orphan)- - 6.5" little oddball. Good++.(not listed, no info)
(4.) REMINGTON - - 6". Three openings with hang hole variation. (R1-393)
(5.) MANN BONE CUTTER (F. W. Mann Co. - Milford, Mass.) - - 4.75". Over cleaned. (R1-308)

Choice Box 075: Lot of: Six Various Wrench Types.
(1.) PROTO - AN-8505-21 - MFD. U.S.A.- 1-9/16 - 1-5/8 - - 12.5" thin offset doe.
(2.) THE ROBERTS WRENCH CO. INC. NY / PATENTED & PATENTS PENDING - - 8.5" self adjust wrench with spring loaded jaws. Same Feb 21, 1922 Frederick Robert patent as the Hoe wrenches applies. Some jaw damage, minor pitting, not cleaned. (S360)  PAT
(3.) TRIMO - -12" adjustable nut wrench with wood slab handles and U-type adjusting nut guards. Fair, crack, dings,
(4.) 42 (orphan) - - 11.5" silo filler type. Good++.
(5.) DP109 (Oliver) - - 11.5". Casting flaw inside one jaw, painted. (R1-360)
(6.) "VICTOR" TRADEMARK - PAT. DEC 23, 1902. PAT.- AUG 25, 1903 / BONNER'S PAT. 1902 - 1903 - - 19.5" quick adjust pipe wrench made by the Bonner Mfg. Co. of Chrisman, ILL. and patented by Clarence E. Bonner, Cherrypoint, IL. Lower jaw frame is broken. (S653)  PAT

Choice Box 076: Lot of: Eight Automotive Wrenches
(1.) SPARK PLUG AND OIL RESERVOIR PLUG WRENCH / 13689 (with Herbrand's "H" in a diamond logo) (orphan) - - 11.25". (no info found)
(2.) 627 - FRNK MOSSBERG CO. - 5/8 -9/16 - - 10.5" double ended socket wrench. Good+.
(3.) ECLIPSE SPRING LUBRICATOR / ST. LOUIS MO. - PAT. PEND. - - 8.5" single hex box end wrench. Good++.. (not listed, no info)
(4.) CONTINENTAL 25254B 2-2 - - 4.5" single open end. For Continental engines used on??. Good++..
(5.) BONNEY No. 2581 - MADE IN USA - - 5.25" special pliers for adjusting Steeldraulic brakes used on Auburn, Buick, Hupmobile, and other early automobiles. Excellent.
(6.) ST1607 B - - 8.75". Found listed in military database as a "TORQUE WRENCH ADAPTER" (NSN 5120-00-167-0186). Excellent.
(7.) CONTINENTAL 25254G - - 4.25" single open end. For Continental engines used on??. Excellent.
(8.) Unmarked (orphan) - - 9.75" cast offset box end wrench.

PiCs Lots CB 74 thru 76

Choice Box 077: Lot of: Five Fire Hydrant and Fire Sprinkler Wrenches
(1.) Unmarked - - 17" fire hydrant and fire truck wrench. Not cleaned.
(2.) HODGMAN MFG. CO. / TAUNTON, MASS. USA - - 9". sprinkler wrench Excellent with original red paint. (R1-234)
(3.) AUTOMATIC SPRINKLER CORP. OF AMERICA - CLEVELAND, OHIO / 38-0709B - - 9" sprinkler wrench. Good++. Painted.
(4.) STAR SPRINKLER CORPORATION (with two star logos) / PHILADELPHIA, PA USA (with two star logos) - - 9.75". Excellent.
(5.) QUARTZOID - FITTING SIDE (G in a triangle logo) / DURASPEED - SPRINKLER SIDE (G in a triangle logo) - - 10". Good++.

Choice Box 078: Lot of: Eight Horseshoe Calk Wrenches and Calks
(1.) GIANT GRIP - 7/16 - - 7". Some edge hammer damage.
(2.) NEVERSLIP MANUFACTURING CO. - NEW BRUNSWICK, N.J. - 1/2 - - 8". Hammer damage on end.
(3.) DIAMOND CALK HORSE SHOE CO. - DULUTH (same markings both sides) - - 7.25". Good+.
(4.) GIANT GRIP No. 2 - 1/2 & 7/16 - - MADE IN USA - - 7". Excellent.
(5.) NEVERSLIP SQUARE No. 1 - 3/8 - 5/16 / PATENT APPLIED FOR - 3/8 - 5/16. Good++. (not listed, patent not found)
(6.) PAT JULY 6, 75 ("IN" arrow logo) / (out arrow logo) - - 9" calk pliers. Patent issued to Samuel Stone of North Manchester, Conn. Good++.  PAT
(7.) NEVERSLIP ("IN" arrow logo) / NEVERSLIP (out arrow logo) - - 8.75". Good++.
(8.) Lot of three unmarked horseshoe calks.

Choice Box 079: Lot of: Seven Fence Tools and Wire Crimpers
(1.) &VC CO - - 9.25" early wire crimper.
(2.) KLEIN & SONS - CHICAGO (with lineman climbing pole logo) - 132-14 - - 11.25" wire crimper.
(3.) M. KLEIN & SON - 4 - - 11" wire crimper.
(4.) KLEIN & SONS - - 6.5" wire crimper. Scarce small size. Excellent.
(5.) KLEIN & SONS - - 6.5" wire crimper. Scarce small size. Excellent.
(6.) U.D.F & TOOL CO. (Utica Drop Forge & Tool Co) UTICA, NY USA / JUNE 14, 92 - SEPT.. 03, 1895 - - 10" combination fencing pliers. Patents were issued to James Heard of Delta, Co. and Albert H. Russell of Mount Washington, Mo. Advertised in May of 1900 by Utica as "The Russell Staple Pulling Button Pliers". Early patented fence pliers. Good+, some weak markings. (not in Smith's book)  PAT and  PAT
(7.) FULTON - - 9.75" combination fencing pliers. (Smith 31)

PiCs Lots CB 77 thru 79

Choice Box 080: Lot of: Seven Farm Wrenches, Etc.
(1.) O C S - 85118 (orphan) - - 31" heavy duty single open ended wrench. (not listed, no info)
(2.) M451D (IHC logo) - - 18.5" threshing machine cylinder wrench and tooth straightener. Good++ with new paint. (R1-254)
(3.) OU34 (orphan) - - heavy double hex socket wrench. (not listed, no info)
(4.) Unmarked (orphan) - - 28" open end by 12-pont box end. New red paint.
(5.) W402 (Emerson-Brantingham, Rockford, ILL. Later Case T. M. Co.) - - 17". Pitted, can't read markings. (R1-163)
(6.) Unmarked (John Deere D2063R) - - 26" lug wrench with pry bar end. (D297)
(7.) B. F. AVERY & SONS - LOU. KY / E1014 - - 18". Painted, pitted and bent. (R1-27)

Choice Box 081: Lot of: Three - Two Mower Guard Tools and a What's It
(1.) 547E - - 9" cast What's It.
(2.) QUUEN (script) - - 11.75" cast mower guard repair block. Piece broken off.
(3.) Unmarked - - 9.5" cast mower guard repair block and chain breaker. Piece broken off of bottom..

PiCs Lots CB 80 and 81

Choice Box 082: Lot of: Five - Three Chain, one Girdle Pipe Wrenches and one Ratchet.
(1.) WALWORTH-PARMELEE NO. 2 - PAT. 11-19-1907 / WALWORTH CO. BOSTON - MADE IN U.S.A. - - 22.5" girdle type pipe wrench fitted with AN 1-1/2" segment. Patent was issued to Roy Parmelee of Chicago, ILL. Good+. (S133)  PAT
(2.) VULCAN 12 - MADE IN USA BY J. H. WILLIAMS & CO.- BROYLIN, NY - PAT'D IN USA OCT 27, 96 - FEB. 23, 97 (also lists patents issued in England and Canada - - 24.5" chain wrench. A total of five chain wrench patents were issued on these dates to William Joseph Grinden and George Amborn, Jr., both of Brooklyn, NY. Painted.  PAT - -  PAT
(3.) VULCAN 31 IMPROVED - J. H. WILLIAMS & CO.- BROYLIN, NY - PATENTED IN US JAN 21, 08 (also lists patents issued in Great Britain, Canada, France, and Argentina) - - 20" chain wrench. Three consecutively chain wrench patents were issued to George Amborn of New York, NY on Jan 21, 1909. Painted.  PAT
(4.) Marked only "BN INC." (Burlington Northern Inc) - - 20" chain wrench. Excellent.
(5.) LOWELL NO. 16 / LOWELL CORPORATION WORCESTER, MASS. - - 16" reversible ratchet with 3/4" square female drive. Painted.

Choice Box 083: Lot of: Five No. 4 Size Alligator Wrenches
(1.) No. 4 ALLIGATOR WRENCH - 1 TO 2 INCH PIPE / ARMSTRONG - CHICAGO USA (with arm and hammer logo) - - 21.5" alligator wrench. Good++.
(2.) Marked only "4" - - 22" alligator wrench. Good++.
(3.) VAUGHAN & BUSHNELL MFG. - CHICAGO, ILL. USA - 4 - - 22" alligator wrench. Painted red..
(4.) Marked only "No. 4" - - 21.5" alligator wrench. Painted, some pitting..
(5.) Marked only "No. 4" - - 22" alligator wrench. Painted yellow.

PiCs Lots CB 82 and 83

Choice Box 084: Lot of: Seven Misc. Wrenches
(1.) JARECKI MFG. CO - ERIE PA - PAT. 1873 - - 29" adjustable pipe wrench tongs with lower jaw adjusted with a knurled gear and rack teeth. The Jarecki wrenches were made in six different sizes. Patent was issued to Albert H. Jarecki of Erie on Apr. 22, 1873. Good+ with some pitting, dings. PAT
(2.) Unmarked (IHC 30011DA) - - 45.5" IHC Farmall tractor drawbar wrench. Socket on one end, other end plain variation.
(3.) BEMIS & CALL - 21 INCH - NO. 90 also marked "BN" (Burlington Northern Railroad) / BILLINGS MADE IN USA - - 21.5" all metal monkey wrench with threaded shaft and hex adjusting nut. Good+ with slight bend.
(4.) BULLARD WRENCH / No. 4 - PAT OCT. 27, '03 - - 19.25" self adjusting wrench with spring loaded pivoting upper and lower jaws. Mfg. by the Bullard Automatic Wrench Co. of Providence, Rhode Island under patents issued to Frank Bullard of Los Angeles, CA. on July 7,1903 and Oct. 27, 1903. Some pitting, dings, adjusting guide pin has been replaced with a slotted screw. (S659)  PAT - -  PAT
(5.) Unmarked (IHC 30011D) - - 49" IHC Farmall tractor starting crank and drawbar wrench. Notched hex socket on one end, square socket on the other end..
(6.) Marked only "7/8" and "1" - - 42" double open ended railroad track wrench. Excellent.
(7.) Unmarked - - 33" crude shop made double open ended wrench.

PiCs Lot CB 84

Choice Box 085: Lot of: Five Williams and Whitman & Barnes Alligator Wrenches
(1.) No. 4 BULL DOG - DROP FROGED IN USA ("W" in a diamond logo) / J. H. WILLIAMS & CO. - - 22". Good++.
(2.) No. 4 - CASPER / (W & B logo) MADE IN USA- - 22". Good++.
(3.) No. 3-1/2 BULL DOG / (W & B logo) MADE IN USA - - 18.75". Good+.
(4.) No. 3 BULL DOG - DROP FROGED IN USA ("W" in a diamond logo) / J. H. WILLIAMS & CO. - - 16". Good+.
(5.) No. 3 BULL DOG - DROP FROGED IN USA ("W" in a diamond logo) / J. H. WILLIAMS & CO. - also marked UPRR (Union Pacific Railroad) - - 16". Good+ with yellow paint..

Choice Box 086: Lot of: Four Whitman & Barnes Alligator Wrenches
(1.) No. 3-1/2 BULL DOG / (W & B logo) - MADE IN USA - - 18.5". Good++.
(2.) No. 2-1/2 BULL DOG - MADE IN USA / Whitman & Barnes MFG. CO. - - 12.5". Excellent.
(3.) No. 2-1/2 BUL LDOG - MADE IN USA / Whitman & Barnes MFG. CO. - - 12.5". Good++.
(4.) No. 2 BULL-DOG - MADE IN USA (W & B logo) / Whitman & Barnes MFG. CO. - - 9". Good++.

PiCs Lots CB 85 and 86

Choice Box 087: Lot of: Ten Misc. Wrenches
(1.) DRIVER - - 6.75" doe.
(2.) 130 - - 6.25" steel doe.
(3.) O-476 / Herbrand logo - - 6" doe with flat extension on side of the jaw.
(4.) MERIT / 31 - - 8.25" doe.
(5.) MERIT / 729 - - 7" doe.
(6.) BONNEY - USA / 504 - - 10" doe-s wrench.
(7.) 2116 - LECTROLITE - USA / 11/16 TRU FIT- - 7.75" soe by box end.
(8.) BLUE POINT 5/8 RX-20 - USA / PATENT RE-ISSSUED No. 17417 - - 7" Patented by Benjamin R. Gillett of Kansas City, MO. on May 03, 1927.  PAT
(9.) 942 - 1-1/2 BLUE POINT BOXSCKET - PATENT APPL'D FOR / PAT. RE No. 17417 - - 7.5".  PAT
(10.) 30323 - - 5.25" soe.

Choice Box 088: Lot of: Seven Misc. Wrenches
(1.) 12 CHROME - VANADIUM - GERMANY - - 5.75" oe by box end.
(2.) HANDY ANDY (with carpenter boy logo) - - 5.5" steel doe. Spots of corrosion.
(3.) J. H. W. & CO, (J. H. Williams) / 3 - - 4.75" doe.
(4.) K-D No. 2149 - USA - -6,25"
(5.) BONNEY (with logo) - - 4.25" doe.
(6.) KING LONG - - 4" steel soe. King Long is a British coach and bus manufacturer.
(7.) J. H. WILLAIMS BKLYN, NY USA - 27 - - 5.75" doe. Some light pitting.

Choice Box 089: Lot of: Seven Misc. Wrenches
(1.) Marked only "X" - - 5.5" cast oddball.
(2.) TAPPAN / 620 - 13 - - 6" cast stove wench and lid lifter?
(3.) PURE CARBONIC INC - - 5.5" cast bottle wrench.
(4.) 369 (orphan) - - 6.5". Gear teeth and peg on one end, oe on the other which is different than usually seen. Also high relief raised markings rather than indented.
(5.) W 101 - - 5.5" cast doe.
(6.) 369 (orphan) - - 6.5". Unusual wrench with gear like teeth on one end and an open end with a peg on the other.
(7.) 7338A / (Eberhard's "E" in a circle logo) - - 6" cast doe-s

Choice Box 090: Lot of: Ten Conduit, Welding, Etc. Wrenches.
(1.) MG - GD2 - - 7.75" combination wrench and hammer. Minor dings.
(2.) M215EE - - 7" oddball combination wrench with six sizes, came with Craftsman welders.
(3.) GUN IMPLUSE GEN. ADJ. WRENCH 42A6483 - - 7".Good++.
(4.) STANLEY / 22-329556.01 - - 10" What's It. Excellent.
(5.) STANLEY - - 8" single open ended wrench. Excellent.
(6.) TIDLAND MACHINE C0. - CAMAS, WASH. - AIR RELEASE TOOL - - 4.25". Good++.
(7.) KONDU BOX - 23W / EMI CO. - - 7" conduct wench? Good++.
(8.) ELECTRICIANS UTILITY TOOL - No. 2000 - - 8" conduit wrench. Excellent.
(9.) THOMAS & BETTS CO No. 33 - PAT. No. 2196701 / E.M.T WRENCH & REAMER - - 8" conduit wrench and reamer. Patented by Carl S. Homsher of Denver, Colo. on Apr. 09, 1940. Like new.  PAT
(10.) APPLETON - PAT. APPL'D FOR / CAT. No, TW-W5075 - - 8.25" conduit wrench and reamer. Excellent.

Choice Box 091: Lot of: Five Misc. Wrenches
(1.) Unmarked - - 10.5" steel wrench with jaw extensions added. Chevy hubcap and water pump wrench? Good++.
(2.) Unmarked - - 7.5" square headed wrench or blacksmith's bolt header tool. Shop made?
(3.) MEPHISTO NO. 214 - - 10: oddball flat steel wrench. Good++.
(4.) Unmarked - - 9" hex wrench with a ridged extension on the other end. Excellent.
(5.) Unmarked - -9" oddball What's It cast tool with two U-shaped hooks on each end. Pitting.

PiCs Lots CB 87 thru 91

Choice Box 092: Lot of: Five Misc. Large Wrenches
(1.) TRIMO - - 26. Trimo 12" nut wrench that has modified jaws and a handle extension (with a ball end) added.
(2.) H. T. M. 040170 (orphan) - - 20" soe.
(3.) BILLINGS 1153 - - 19" doe.
(4.) UT6038 (orphan) - - 21" doe.
(5.) ANORD (owner's ID?) - - 16.25" doe. Shop made?

Choice Box 093: Lot of: Six Misc. Wrenches
(1.) AC FILTER SERVICE / CAM-LOC T. K. F. Co. - Detroit 2 USA - PAT. No. 2550010 - HF11 - - 10" Ratching double ended wrench patented by Alfred Kavalar of Detroit, MIch. on Apr. 24, 1951  PAT
(2.) M. KLEIN & SONS / CAT. 3146 - - 12.75" lineman's lag screw wrench.
(3.) UX5 / 1/2 (Gehl Bros. - West Bend, Wisc. and Western Land Roller - Hasting, Neb.) - - 15". (R2-112, R2-292)
(4.) KEN-TOOL G16 - - 15.75" universal barrel bung wrench.
(5.) Unmarked (odd ball, orphan) - - 17" Tee wrench with two square sockets and one open end. Pitting.
(6.) PATT. NO. 2150 -5 - - 15" Fireman's hose and hydrant wrench.

PiCs Lots CB 92 thru 93

Choice Box 094: Lot of: Twenty-one Hinsdale Wrenches If you collect or use Hinsdale wrenches you will probably find a few you need in this lot.

Choice Box 095: Lot of: Nine Automotive Related Tools
(1.) Unmarked - - 10.5". Packard hubcap, etc. wrench.
(2.) Kent-Moore J-933 - Clutch Gear Ret. Nut - Chev. 1937 - - 8.75" offset single open end 1937 Chevrolet specialty service tool.
(3.) AF310 / "A' in a circle logo (Chevy No. 24334 c.1923) - - 8.5" lug wrench with hammer and pry bar end.
(4.) V34 - - 11" valve lifter tool. No chain or hook.
(5.) Unmarked - - 12" valve lifter tool. No chain or hook.
(6.) 3620 WALDEN WORCESTER - PAT. PEND. - -11" hex box by hex socket.
(7.) A. H. Reid - - 13" Archimedes type valve grinder with wooden knob and grip. Knob has small piece missing.
(8.) 4222 - BLACKHAWK USA - - 9" ratcheting double box end wrench.
(9.) W. E. ROSEL - COL. O. / 5 I 1 TOOL - PATD JULY 22, 1919 - -7.5" cast combination tool advertised as "a tool Ford Model "T" owners cannot be without". For spark plugs and several other adjustments; ignition gap gauge, screwdriver and alligator wrench. Design patent was granted to William E. Rosel of Columbus, Ohio. Light pitting.  PAT

PiCs Lots CB 94 thru 95

Choice Box 096: Lot of: Ten Automobile Tool Kit Wrenches
(1.) MAXWELL - 4 - - 9.5"
(2.) MAXWELL - 3 - - 7,75"
(3.) TIRE CARRIER WRENCH / 678225 (with backward "S" logo) (Studebaker Truck wrench) - - 9". Pitting.
(4.) TIRE CARRIER WRENCH / 678225 (with backward "S" logo) (Studebaker Truck wrench) - - 9".
(5.) TIRE CARRIER WRENCH / 678225 (with backward "S" logo) (Studebaker Truck wrench) - - 9". Over cleaned.
(6.) 5 (Dodge Bros.) - - 10". some pitting.
(7.) 5 (Dodge Bros.) - - 10".
(8.) 5 (Dodge Bros.) - - 10".
(9.) 2 (Dodge Bros.) - - 6.5".
(10.) 2 (Dodge Bros.) - - 6.75".

Choice Box 097: Lot of: Five Cast Farm and Automobile Wrenches
(1.) 1RN338 (Reo?) - - 11" mal. dbl hex box with four pegs for valve port caps. Pitted.
(2.) Marked only "5" (orphan) - - 9.5". Good+.
(3.) CHATTANOOGA CP4003 / (IHC logo) - - 8.5" with hammer head. All markings raised. Pitted. (R1-98)
(4.) 4851 (Nichols & Sheppard, Battle Creek, Mich.) - - 10.5: Steam engine wrench. Severely pitted. (R2-216, R2-216)
(5.) 6F3703 (Caterpillar) with horizontal "T" logo - - 8.5" double male hex drain plug wrench. Good++. (R3-43)

Choice Box 098: Lot of: Four Misc. Tools
(1.) APPLI-CASTR - MINOCK MFG. CO. - DENVER, COLO. - PAT NO. 2601547 - - 8" expander tool for elastic emasculator bands. Patented by Robert M. Minock on June 24. 1952. Drilled holes in end of each handle.  PAT
(2.) Unmarked - - 7" cast plier type fruit jar lid opener.
(3.) NOX-TOX - BRIDGEPORT HDWE. MFG. CORP - MADE IN USA - - 9" all metal crate or box opener with double hammer heads, pry bar, nail puller. Good++.
(4.) Unmarked - - 6" cast odd pliers with a screw adjustable gauge disk?

PiCs Lots CB 96 thru 98

Choice Box 099: Lot of: Six Wood Handled Monkey Wrenches
(1.) Unmarked - - 14.5" early Coes type monkey wrench. Good++.
(2.) L. COES & CO. with 1880 and 1884 patent dates.- - 15" with Coes' first knife type handle. Not marked or the markings can't be read on one side, edge hammer damage. HP43 or HP44)
(3.) Whitman & Barnes logo - - 15" knife type wood handled monkey wrench with slotted adjusting screw. Some dings.
(4.) Peck, Stow & Wilcox's arm and hammer logo - - 12" knife type wood handled monkey wrench. Nice handle, some dings on handle ferrule.
(5.) Peck, Stow & Wilcox - - 10" wood handled monkey wrench. Good+.
(6.) Whitman & Barnes logo - -1 0" knife type wood handled monkey wrench with knurled adjusting screw. Handle cracks.

Choice Box 100: Lot of: Eight Wood Handled Monkey Wrenches
(1.) Whitman & Barnes logo - - 8" with knife type handle. Good+.
(2.) Peck, Stow & Wilcox PAT. JAN 14, 1896 - - 8" with wood knife type handles. Good, some surfaces look like they have been machined..
(3.) H. D. Smith PERFECT HANDLE - - 8" with knife type handles. Good+ with some weak markings.
(4.) PEXTO - - 8" with knife type handles. Good++ with owner's initials carved in handle "A".
(5.) Peck, Stow & Wilcox IDEAL - PAT. JAN 24, 05 - - 8" with wood knife type handles. Good+.
(6.) Peck, Stow & Wilcox SOLID BAR -PAT. JAN 14, 1896 - - 8" with wood knife type handles. Good+.
(7.) Whitman & Barnes logo. Also marked CT. NO. PA. CO. (? Northern Pennsylvania Co. Railroad?) - - 8" with knife type handle. Some pitting.
(8.) MFD UNDER L. COE'S PAT'S - STEEL Also marked S.R. RR.(Sandy River Railroad) - - 8" with knife type handle. Some minor dings, pitting. (like HP55 but with wood handle not all metal)

Choice Box 101: Lot of: Eight Coes Wood Handled Monkey Wrenches
(1.) L. COES PAT'D DEC 15, 1891 - APR. 30, 1895 - - 10" knife handle with handle ferrule spur extensions. Tight handle crack, some dings. (HP50)
(2.) COES WRENCH CO - WORCESTER, MASS / L. COES PATD. JULY 6, 1880 - JULY 8, 1884 - - 10" with knife type handles. Minor dings, owner's initials carved in handle "WRH". (HP45)
(3.) COES WRENCH CO. / MFD UNDER L. COES PAT'S - STEEL - - 10". Some dings. (marked like HP58 but with wood knife type handle instead of all steel)
(4.) COES WRENCH CO. - WORCESTER - USA / MADE IN USA UNDER L. COES PAT'S - STEEL - - 8" with wooden knife handles. Good+ with some minor dings. (HP53)
(5.) COES WRENCH CO - WORCESTER MASS / L. COES PAT'D MAY 15, 1900 - - 8" with wooden knife type handle. Good+ with replaced oak handle scales. (Marking variation of HP52, not marked STEEL.)
(6.) COES WRENCH CO - WORCESTER, MASS / L. COES PATD. JULY 6, 1880 - JULY 8, 1884 - - 6" with knife type handles. Good+. (HP45)
(7.) COES WRENCH CO - WORCESTER, MASS / L. COES PATD. JULY 6, 1880 - JULY 8, 1884 - - 6" with knife type handles. Minor dings, handle chip and tight crack. (HP45)
(8.) COES WRENCH CO - WORCESTER MASS / L. COES PAT'D MAY 15, 1900 - - 6" with wooden knife type handle. Good+ with owner's initials "AW". (HP52)

PiCs Lots CB 99 thru 101

Choice Box 102: Lot of: Five Monkey Wrenches
(1.) E. C. Simmons Keen Kutter logo - SOLID BAR - USA - - 10" with wooden knife type handle. Has owner's stamped initials "J. M.", handles are replacements.
(2.) Whitman & Barnes logo - - 8" with wood handle. Good+, minor dings.
(3.) Marked only "8" - - 8.5" with wooden handle. Good++.
(4.) COES WRENCH CO. - WORCESTER - USA / MADE IN USA UNDER L. COES PAT'S - STEEL - - 6" with wooden knife handles. Good. can't read all the markings. (like HP53)
(5.) COES WRENCH CO - WORCESTER - MASS. USA / MADE UNDER L. COES PAT'S - STEEL - - 8" all metal. Good+. (HP56)

Choice Box 103: Lot of: Three Adjustable Wrenches
(1.) H & E WRENCH CO OF NEW BEDFORD, MASS / PAT MAR 27, 1923, (with logo) (etc.) - - 10.25" Nut wrench version of the Handee helix type quick adjust wrench. Patented by Edwin Evans and George Hemphill of Salt Lake City, Utah. Good++. (S496)  PAT
(2.) Unmarked - - 4" sleeve type, side adjust bicycle or p[octet wrench. Good+.
(3.) Westcott No. 80 - - 10" curved handle Crescent type adjustable wrench. Several dings, some pitting.

Choice Box 104: Lot of: Six Misc. Wrenches
(1.) AUTO. SPKR. CO. - U.S - U.S. - - 9.5" cast fire sprinkler wrench. Pitting.
(2.) VIKING ZH-1005 - - 8" fire sprinkler wrench. Excellent.
(3.) No. 275 with Mossberg logos - - 8.5" steel doe. Some hammer use damage.
(4.) 41-W-642-25 - - 9". US Military wrench, sue not known. Excellent.
(5.) IMPERIAL - 3/4 / PAT. NO. 2814225 - CHICAGO USA - - 7" ratcheting box end wrench with a hinged upper jaw. Patented Nov 26, 1957 by Morley Mann of Lombard, ILL. Good+.  PAT
(6.) Unmarked - - 6" pliers/knife combination pocket tool with eight factions. Piece of the handle covering is missing.

Choice Box 105: Lot of: Eight Maytag Wrenches
(1.) MAYTAG (No. 2) - - Pitting.
(2.) MAYTAG (No. 2)
(3.) MAYTAG (No. 6)
(4.) MAYTAG (No. 6)
(5.) MAYTAG (No. 6)
(6.) Unmarked (No. 9)
(7.) Unmarked (No. 9)
(8.) Unmarked (No. 9)

Choice Box 106: Lot of: Five Assorted Wrenches
(1.) U.S. SEPARATOR - - 5" bicycle style wrench for the United States Cream Separator made by the Vermont Farm Machine Co. of Bellows Falls, Vermont. Some corrosion. (R465)
(2.) Billings & Spencer A - - 4.25" bike or pocket wrench. Good+.
(3.) Billings & Spencer A - - 4.25" bike or pocket wrench. Light pitting.
(4.) GERMANY - VP - - 3.5" bike or pocket wrench. Pitting.
(5.) TOMAHAWK / 11/16 - 5/8 - - 6.5" doe. Excellent.

Choice Box 107: Lot of: Five Helix Screw Quick Adjust Wrenches
(1.) HELIX 8 IN PETERSON TOOL CO. - EL DORADO, KANSAS - US PAT 3555939 / STAINLESS STEEL - OTHER FOREIGN PAT PENDING etc. - - 8.5". Patented by Kenneth Halls of Broomfield, Colorado and assigned to Eugene Peterson. These wrenches were mfg. in El Dorado and Towanda, Kansas. Good++..  PAT
(2.) QUALI-KRAFT / USA PAT. PEND. JAPAN (etc.) - - 8" with 11/16" box end wrench on end of handle, black finish. Good++.
(3.) QUALI-KRAFT / USA PAT. PEND. JAPAN (etc.) - - 8" with 11/16" box end wrench on end of handle, plated finish. Area with corrosion.
(4.) HELIX 8 IN PETERSON TOOL CO. - EL DORADO, KANSAS - - 8.5" Like wrench In 107-1 above. Good++.
(5.) SPACE TOOL - FORGED / PO BOX 1924 PASADENA, TEXAS - GOOCH'S BEST FEEDS - - 8" with advertising. Cover plate screws are missing.

PiCs Lots CB 102 thru 107

Choice Box 108: Lot of: Six Adjustable Wrenches
(1.) BLACK & DECKER AUTO WRENCH - -9.5" Crescent type combination wrench with regular screw adjustment and a battery adjustment. Batteries aren't included but I did try it with new batteries and it does work but slowly, probably needs a good cleaning. Plastic handle inserts are worn with a couple cracks.
(2.) COCHRAN SPEEDNUT WRENCH - PAT. PENDING - - 9" self adjusting nut wrench. Good+
(3.) Unmarked - - 8" Crescent type adjustable wrench with plastic handle covering. Minor edge dings, some of the plastic has broken off.
(4.) VOLVO - AB BACCO - STOCKHOLM / V-STEEL - 8" BAHCO 31 - MADE IN SWEDEN - - 8" Crescent type wrench with alligator wrench on end. Pitting..
(5.) COCHRAN SPEEDNUT WRENCH - PAT. PENDING - - 9" self adjusting nut wrench. Good with drilled hang hole.
(6.) HASTEE 8" / Label marked: HASTEE - 8 - PATENT PENDING - DAVENPORT TOOL CO. - ELDRIDGE, IA - - 8" self adjusting wrench. Patent was issued to Paul E. Lenker of Davenport, Iowa on Apr. 16, 1974. Excellent. (S321)  PAT

Choice Box 109: Lot of: Four Wrenches and Two Brace Tools.
(1.) V & B (Vaughan & Bushnell Mfg. Co. - Chicago, ILL) - DEC. 6, 98 - - 15.25" self adjusting nut and pipe wrench. Good++.  PAT
(2.) CHANDLER CO - CEDAR RAPIDS, IOWA / YOKE WRENCH - PATENT PENDING - - 12.5" unusual wrench with pivoting upper jaw and a notched lower jaw. Light pitting. over cleaned. (not listed, no info)
(3.) 14" CRAFTSMAN HEAVY DUTY - - 12.75" Ridgid style pipe wrench. Good++.
(4.) PIPEMASTER / THE ERIE TOOL WORKS - ERIE, PA, USA - - 10" Ridgid type pipe wrench. Good++.
(5.) Unmarked - - 2" square socket with tapered shank for a brace. Good++.
(6.) Unmarred - - 5.25" long and 3" diameter large auger bit with tapered shank. Good++.

Choice Box 110: Lot of: Seven Trimo Wood Handled Adjustable Nut Wrenches. All have some of the metal parts painted black.
(1.) TRIMO - - 8" washer guard type. Good+.
(2.) TRIMO - - 12" washer guard type. Good+, some new paint, excellent handle.
(3.) TRIMO - - 10" U-shaped guard type but it has been replaced with a washer..
(4.) TRIMO - - 12" washer guard type. Good++, excellent handle.
(5.) TRIMO - - 8" washer guard type. Good++ with owner's ID "98" stamped on handle.
(6.) TRIMO - - 8" washer guard type. Hammer dings on edge.
(7.) TRIMO - - 8" washer guard type. Good+.

PiCs Lots CB 108 thru 110

Choice Box 111: Lot of: Six Adjustable Wrenches
(1.) Unmarked - - 11.75" sliding wedge adjust wrench with a serrated pipe jaw insert. Some jaw serration chips.
(2.) Unmarked - - 11.75" sliding wedge adjust nut wrench. Good+.
(3.) Unmarked - - 9.75" sliding wedge adjust nut wrench. Good+ with some edge hammer dings.
(4.) Westcott No. 80 - 4194 - - 10" curved handle Crescent type adjustable wrench. Cleaned to bare metal.
(5.) ACME logo (weak markings) - - 9.75" Acme twist handle adjustable nut wrench, scarcer variant with adjusting nut on hammer side. Good. new paint..
(6.) Marked only "A" - - 8" Acme twist handle adjustable nut wrench. Good, repainted.

Choice Box 112: Lot of: Four Bicycle or Pocket Wrenches
(1.) GIRARD WRENCH MFG. CO. - GIRARD, PA. USA - -5.25" bicycle or pocket wrench. Not cleaned.
(2.) Unmarked - - 4.75" bicycle or pocket wrench. Good+.
(3.) BARCALO - BUFFALO - - 4.75" bicycle or pocket wrench. Good++ with plating.
(4.) ACME logo (weak markings) - - 5" Acme twist handle adjustable nut wrench. Fair.

Choice Box 113: Lot of: Five Adjustable Wrenches
(1.) ACME logo (weak markings) - - 6.25" Acme twist handle adjustable nut wrench. Good.
(2.) H. D. SMITH PERFECT HANDL;E - - 10.5" wood handled monkey wrench. Replaced handle slabs.
(3.) ACME logo (weak markings) - - 8" Acme twist handle adjustable nut wrench. Good.
(4.) HERCULES (inside a Whitman & Barnes logo) - PATENT FEB. 27, 83 - MADE IN USA - - Hercules loop handle adjustable nut wrench. Minor hammer damage, tight crack below adjusting knurl.  PAT
(5.) LIGHTNING WRENCH MADE BY HAMPTON MACHINE & TOOL CO. - - 9.5" adjustable pliers type wrench with screwdriver on end. Good+ with usual weak markings. (S690)

Choice Box 114: Lot of: Ten Assorted Wrenches with Problems
(1.) Dual marked Coes and Billings - -15" all metal monkey wrench. Fair (HP66 - last model in the book)
(2.) 2272 (orphan) - - 12.5".cast hubcap wrench. Pitted.
(3.) 3 - NASH - - 7.75" doe. Jaws sides modified.
(4.) BONNEY VISE & TOOL WKS - PHILA, PA -THE MASTERPIECE - ESTABLISHED 1876 / PATENTED MAR 3, 1903 - Aug. 9, 1904 - - 10.5". Wood handled threaded shaft type combination nut and pipe wrench and pipe cutter. Patents granted to Charles S. Bonney of Portsmouth, Ohio and Joseph G. Baker of Philadelphia, PA. Good+. the pipe cutter is missing. Nice wood handle. (S567)  PAT.
(5.) 6490? (Studebaker) - -6.75" Extremely pitted.
(6.) AUTO / Whitman & Barnes logo - -10.25" Coes type all metal monkey wrench, thinner than normal monkey wrenches. Poor, hammer damage, jaws sprung, adjusting bolt loose.
(7.) REMINGTON - - 6". Pitting.
(8.) A (Janesville Machine Co., Later Samson Tractor Co.) - 12.25" . Good+ with a drilled hang hole.
(9.) RAMBLER - -5,75" DOE. Severe pitting.
(10.) NEWELL SANDERS PLOW CO / A163 (later IHC) - - 8.5". Severe pitting, bent. (R1-351)

PiCs Lots CB 111 thru 114

Choice Box 115: Lot of: Seven Assorted Tools
(1.) Marked only with a "CM" logo (CHALLENGE MACHINERY CO ) - - 4.25" printing Quoin Key.
(2.) Unmarked - - 1.5" heavy duty screwdriver. Looks like a machine shop project.
(3.) BELL SYSTEM - COPE - - 12" cast cable or wire hook minus the handle.
(4.) BIXBYS BOX OPENER / BOX TERRIER - - 9". box or crate tool. Weak markings.
(5.) BRIDGEPORT - USA - BELL SYSTEM - - 10.25" wood handled crimping tool?
(6.) SEXAUER MFG. CO. NY - - 10.5" What's It.
(7.) NYE - P90 / P921 - - 16" ratcheting pipe reamer. As found, not cleaned.

Choice Box 116: Lot of: Seven Wrenches, Crimpers, Etc.
(1.) AMP - P.I.D.G. = 12-10 - 59062 - PAT. PEND (USAF 483 scratched on handle) - - 12" crimper tool. Good++.
(2.) Unmarked - - 13" specialty pliers type tool. Excellent.
(3.) RAJAH - PAT. 1858418 - MADE IN U.S.A. - - 10" wire terminal crimper patented 5-17-1932 by Charles Rowley of Bloomfield, New Jersey. Good++.  PAT.
(4.) N.T.K.CHROME HMOLYBDENIUM - 32 - 30 - - 10.75" doe. Excellent.
(5.) 25 - 7812090 with an underline "M" in a circle logo - - 8.25" soe. Excellent.
(6.) FAIRBANKS MORSE & CO. - 90 - - 7.75" doe. Surface roughness.
(7.) B5 (Mast, Foos & Co. - Springfield, Ohio) - - 3.75" (8" with added wooden handle). Good++. (R2-186)

Choice Box 117: Lot of: Ten Assorted Wrenches
(1.) Unmarked - - 10" heavy extended hex socket.
(2.) S. J. SHINER & SONS - MILTON, PA - - 8.75" doe. Shiner made wood planers and shapers, etc. Pitting.
(3.) Can't read markings - - 10.75" thick heavy doe. Pitted.
(4.) JOS. POSCH MFR - ST. PAUL - - 5". Possibly a beer tap wrench. Pitted, markings hard to read. (R1-383)
(5.) B. F. STURTEVANT CO. - 280 - - 10" doe. Good..
(6.) 509 (Osborne, later IHC, later E&B) (numbers not readable) - - 7.5". Pitted.
(7.) GENERAL MACHINE PRODUCTS / arm and hammer logo (Armstrong logo) - - 10". Good.
(8.) STANDARD - - 6,25" garden cultivator cast wrench. Casting flaws on one jaw.
(9.) 41 (orphan) - - 8,25" cast farm wrench. Severe pitting.
(10.) C & W. W. - 11617 (hard to read pitted markings) - - 13.5" doe-s. Pitted.

PiCs Lots CB 115 thru 117

Choice Box 118: Lot of: Six Barrel Bung Type Wrenches
(1.) TRI-SURE - NEW YORK / "A" in a circle logo - - 10" bung wrench. Painted, light pitting or casting roughness.
(2.) VISE GRIP W16 / AUBURN, IND. USA - - 13. hammer style double ended bung wrench. Excellent.
(3.) TOLCO - TOLEDO - - 7" aluminum bung wrench. Excellent.
(4.) DUBOIS CHEMICAL / W169 MULTI METER - AUBURN, IND. - - 10" aluminum bung wrench? Excellent.
(5.) TRI-SURE ("A" in a circle logo) - REG. US PAT. OFFICE / AMERICAN FLANGE MFG. CO. - - 11.75" Good++.
(6.) Unmarked - -16.5" bung wrench? Excellent.

Choice Box 119: Lot of: Seven Automotive Wrenches
(1.) BARCALO-BUFFALO - PATENT NO. 1,870,612 - - 10.5" after market Ford wrench with five functions. Patent was issued to Alex de Schebeko of Chicago, IL on Aug. 09, 1932. Used for spark plugs, front and rear wheel brake adjustment, and drain plugs on Ford cars and trucks. Twelve point box ends variant. Good+.  PAT.
(2.) BARCALO-BUFFALO - PATENT NO. 1,870,612 - - 10.5" after market Ford wrench with five functions. Six point box ends variant. Good++.  PAT.
(3.) KEN TOOL - C14 - - 8.5" ten-way universal drain plug wrench. Excellent.
(4.) REDA MFG. CO. - WOPRCESTER, MASS. - PAT. APPD -DROP FORGED - - 8.75" Ten-way universal drain plug wrench. Usually seen marked "Springfield, Mass." rather than "Worcester". Excellent.
(5.) SPARK PLUG AND OIL RESERVOIR PLUG WRENCH / 13689 (orphan) - - 11.25". Good++. (no info found)
(6.) SPARK PLUG AND OIL RESERVOIR PLUG WRENCH / 13689 (orphan) (with Herbrand's "H" in a diamond logo) - - 11.25". Pitted.(no info found)
(7.) AF310 / "A' in a circle logo (Chevy No. 24334 c.1923) - - 8.5" lug wrench with hammer and pry bar end.

Choice Box 120: Lot of: Seven Misc. Wrenches and Tools
(1.) THE CORNELIUS CO. - MINNEAPOLIS, MINN. - USE WITH CORNELIUS CO. FERRULES ONLY - - 13" non magnetic alloy crimping tool with fourteen extra segments. Excellent.
(2.) Unmarked - -10" reamer tool? Excellent.
(3.) ROYAL FLUSH MAINTAINCE SERVICE TOOL / APPLEGATE ENGINEERING CO. - 1616 E. ST. - BROOKLYN, NY - - 10.75" plumber's multi-wrench and thread chaser. Excellent.
(4.) J. M. COLE - BLOOMINGTON - PAT. 6-22-20 - - 12" tool for straightening automobile wheel clincher rims. Patent was granted to John M. Cole of Bloomington, Ind. Excellent.  PAT.
(5.) Marked only "30" - - 14" odd oe by box end wrench. Good+.
(6.) Unmarked (orphan)- - 8.5" thick cast doe. Good+.
(7.) TOOL No. 4132023 - WING FLAP OPERATING STRUT PACKING NUT - LANDING GEAR RETRACHCTING STRUT PACKING NUT - - 15.5". Good++.

PiCs Lots CB 118 thru 120

Choice Box 121: Lot of: Seven John Deere Wrenches
(1.) Marked only MADE IN USA (JOHN DEERE B353R) - - 19". Good++. (D250)
(2.) Marked R34827 - MADE IN USA (John Deere) - - 18.75". Good+. (D509)
(3.) Marked R34827R - MADE IN USA (John Deere) - - 19". Good++. (D510)
(4.) Unmarked (Deere AH79764 - - 17.75" with 1" hex shaft. Good+. (D217)
(5.) Unmarked (Deere D1083R) - - 12.5". Good with hammer dings. (D293)
(6.) B596R - MADE IN USA (Deere) - - 12" double socket wrench for Model "B" tractors. Good+ . (D256)
(7.) K806 (Deere) - - 12.5". Good. (D386)

Choice Box 122: Lot of: Nine John Deere Wrenches
(1.) John Deere / 1340SC - 9" Pitted, new paint. (D81)
(2.) Deere HZ836 - - 7" two round holes on double open end variation. Good+. (D338)
(3.) A522 / DEERE MANSUR CO - - 7.5". Numbers upside down compared to D170. Good+. (D171)
(4.) 31 (Deere, Hart-Carter, Nichols & Shepard and Oliver) - - 8" tee socket wrench. Numbered on right variation. Good+. (D5)
(5.) No. 264 with Mossberg logos (Waterloo Boy No. K2057) - - 7.75". Good+ with minor edge dings. (D389)
(6.) VAN BRUNT / D380 - - 7" with stud no JD logo variation. Good++. (D281)
(7.) VAN BRUNT / D380 - - 7" with stud no JD logo variation. Good+. (D281)
(8.) VAN BRUNT / D380 - - 7" with stud no JD logo variation. Good+ with a casting stress crack. (D281)
(9.) VAN BRUNT / D380 - - 7" with stud with JD logo variation. Drilled hang hole. (D281)

Choice Box 123: Lot of: Eight John Deer Wrenches
(1.) SC25 (Syracuse Chilled Plow Co. / Deere) - - 6.5" with angled square opening variation. Severe pitting. (D530)
(2.) A522 / DEERE MANSUR CO - - 7.5". Good++. (D170)
(3.) 196 (Deere) - - 7,25". Two square holes variant. Severe pitting, new paint. (D43).
(4.) 196 / Z - - 7". Solid on double opening end variant. Pitted. (D39)
(5.) DEERE - - 6.5" flat steel.
(6.) A523 / DEERE MANSUR CO. - - 6". Pitting. (D177)
(7.) A523 / DEERE MANSUR CO. - - 6". Pitting. (D177)
(8.) Dain (Deere) / Z78 - D - - 6.5" pitman wrench. Good. (D561)

PiCs Lots CB 121 thru 123

End of cataloged lots. There may be additional unlisted lots

Back To The Wrenching News Homepage

Copyright 2015 by Don 'Bus' Haury
Webmaster: Don 'Bus' Haury