Catalog of The Wrenching News 2016 Fall Antique Wrench Auction
to be Held in Conjunction with the 2016 Missouri Valley Wrench Club Fall Meet October 28-29, 2016 in El Dorado, Kansas


A Printed Catalog with most of the wrenches pictured will be available for $20.00 and a Prices Realized List for $5.00 will be available after the auction (if you are an active bidder either in person or absentee you should be receiving a catalog). To order catalogs or for more information contact Don 'Bus: Haury: Email or phone: 316-284-7345 or 316-283-5876.
     See The Wrenching News Homepage for updates and more information on the auction and Missouri Valley Club Meeting.



CATALOG OF WRENCHES for the Wrenching News
Fall 2016 ANTIQUE WRENCH AUCTION
Featuring the wrench collections of Dean Jendo and Evan Johnson

Friday October 28 and Saturday October 29, 2016

AUCTION STARTS AT 12:30 P.M. FRIDAY (approximately 1/2 hour after Wrench Club Meet ends)
AND AT 8:30 A.M. SATURDAY

AT THE BUTLER COUNTY COMMUNITY BUILDING - 200 N GRIFFITH, EL DORADO, KS 67042



The Fall Missouri Valley Wrench Meet will be held October 28th in El Dorado, Kansas at the Butler County Community Building - 200 N Griffith preceding the auction. We are inviting members of the Barbed Wire Collectors Club, Southwest Tool Collectors Association, Mid-West Tool Collectors Association and the Hardware Companies Kollectors Klub to participate in the show and swap meet.

Contact Auction Manager Don Haury at 316-284-7345 - donhaury@southwind.net
Also see www.wrenchingnews.com .

The Fall 2016 Wrenching News Antique Wrench Auction to be held after the Missouri Valley Wrench Club Fall Meet in El Dorado, Kansas features Dean Jendo's of Buckley Washington farm wrench collection and adjustable wrenches from the collection of Evan Johnson of Walton, Kansas plus a few lots from other Missouri Valley Wrench Club members.

Dean collected mostly farm wrenches but is moving and can't take his wrenches along. Evan collects mostly adjustable wrenches and many other things. Over the years he's been a great ambassador for the wrench collecting hobby as has displayed his wrenches and given presentations several times. Evan and his collections have also been featured several times in local newspapers and magazines. Evan's garage is full from the floor to the ceiling and his wife says it's time to start downsizing.

Auction has 1040 lots with 2100 items. Highlights of the auction include several rare and desirable cutout type wrenches including a Casaday, Bradley Wonder, Zenith, two variations of the Comet wrench, Ames, etc: large selections of silo type wrenches, over 200 buggy and wagon wrenches, nearly every Deering Type wrench in the book (and a couple that aren't): more neat oddball and orphan wrenches than we ever had to catalog; numerous adjustable wrenches including a type one Vise-Grips and one transactional type not seen before, large grouping of Baxter double ended wrenches and numerous other adjustable wrenches. Also listed are several Winchester, KeenKutter and other hardware company wrenches, several brass, etc. non-sparking wrenches and other tools: implement tool boxes, oil cans, drill box lids and several small advertising items.

AUCTION CONTACT INFORMATION

Auction Manager:
Don 'Bus' Haury
7913 SW 24th - Halstead, KS 67056
316-284-7345 or 316-283-5876
donhaury@southwind.net 		Absentee Bids:
Stan Schulz
659 E 9th - York, NE 68467-3109
402-362-7686
mvwcnews@gmail.com

To view all photos on one page  Click Here
If you don't have a fast connection you will probably have to refresh the page a few times)

To view individual or group pictures click on the PiC or PiCs logos in the listings.

To see patent information click on the PAT. logo in the listings.
Patent information is from the DATAMP - Directory of American Tool & Machinery Patents
or Google Patents if the patent is not listed on DATAMP.

For abbreviations and book references used in our auction catalogs:  Click Here

A WORD ON CONDITION: Because of the character of their use and storage wrench condition can hardly be judged to the same standards as other tools. I try to use the broad categories of condition: Poor, Fair, Good, Good+, Good++, Excellent, and Excellent, like new. I also try to note all faults such as missing parts, cracks, pitting, over cleaning, repairs, etc. Likewise the wrenches in this auction that are in exceptional fine or excellent condition have been so noted, even a common wrench that has survived the years in almost unused condition is a rarity.

Other info:
* Measurements are usually rounded off to the nearest 1/4".
* The markings on the wrenches are in all capital letters.
* a / separates markings on one side of the wrench from the other side.
* If a wrench is misnumbered in a photo the description number will prevail.
* To search for a particular wrench or company (for example IHC, Deere, Coes, adjust etc,) use the find on this page in the edit menu. I have tried to list the company or companies associated with each wrench.

Terms of the Sale:
All payments in U.S. currency or check with proper identification. No items to be removed until settled for. The Wrenching News, auctioneers and the consignors shall not be responsible for any accident or loss. Sold as is with no guarantees or warranties expressed or implied. Statements made sale day will take precedence over any printed advertisement. No credit cards.

Absentee bid policy:
Absentee bids may be submitted by mail, email or phone. Email is the best. Stan's can't be reached by phone on Thursday, Friday, Saturday & Sunday after 4:00 PM Central Time. If you need to contact us during these times call Bus at 316-284-7345. Bid by lot number with the maximum amount you wish to bid for each lot. Also please indicate if you are willing to go "one increment higher" if your high bid is taken on the floor. Your bid will be entered competitively at one bid increment over the next highest bid or 50 per cent of your maximum bid, whichever is higher. Thus you may purchase your item for less than your maximum bid. A 5% handling charge (minimum of $3.00 total) will be added to the selling price of winning absentee bids, plus shipping, insurance and sales tax if applicable. If insurance is not purchased we will not be responsible for loss or damage. Don't be afraid to submit "low-ball" bids. You could win some bargains.

We have listed some of the box lots that will be sold choice item and absentee bids will be accepted on these listed items. Just give us the lot number and item number when submitting your bids.

Please include your phone number or email address as absentee bidders will be notified by phone or by email. Notification will be about Tuesday or Wednesday after the sale as it takes 2 to 3 days to sort, weigh, wrap, and determine the shipping charges.

Auction Catalog and Prices Realized List:
A printed catalog and post auction price realized list will be available. See contact information for Don Haury above.

For more information on the Wrench Auction and the Missouri Valley Wrench Club Meet see
The Wrenching News Home Page

This auction catalog was compiled and is hosted by Don "Bus" Haury.
Any questions or comments please email Bus or phone 316-284-7345.


Order of Sale:
Friday October 29: Lot No. 773 to the end of the individual lots and all the choice box lots.
Saturday October 30: All the remaining listed lots starting at Lot No. 1.

*****************************
List of Wrenches
The Wrenching News 2016 Fall Antique Wrench Auction

October 28 and 29 - El Dorado, Kansas

Silo and Silo Type Wrenches - Group One (Lots 1 - 33)

0001. ECONOMY SILO (Economy Tank & Silo Co. - Fredrick, Maryland) / 1 - - 9". Good++. (R1-158)

0002. VESPER SILO (Vesper Wood Mfg. Co. - Vesper, Wisc.) - - 11". Y-Shaped with three open ends. RARE. Good+ with some pitting. (R1-473)

0003. SILO CO / UNADILLA N.Y. - - 8.75" Y-shaped with three open ends. Good++. (R1-462)

0004. VESPER WOOD MFG CO / VESPER WIS - - 10" double box end variant. (R1-473)

0005. PHILA. SILOS (Philadelphia Silos) / E. F. SCHLICHTER CO - - 11.5". Good++. (R1-416)

0006. WOODS BROS SILO & MFG CO / THE HINGE DOOR SILO - - 8.5". Extended socket side variant. Excellent. (R1-496)

0007. NAPPANEE SILOS - MONARCH & CLIMAX / NAPPANEE LUMBER & MFG. CO. - NAPPANEE IND. - - 12.25" double open end S-wrench. Good+, some pitting. (R1-346)

0008. T.B. WOOD'S SONS -1/2 / CHAMBERSBURG, PA. - - 8.5" Good++ (R1-493)

0009. UNADILLA SILO CO (Unadilla, New York) 5/8 - 1/2 / 3/4 - 24 - - 9.75" double hex by single hex. Good+. (R1-462)

0010. UNADILLA SILO CO. - 5/8 - 1/2 / 3/4 (Unadilla, New York) - - 9.75" double hex by single hex. Excellent. (R1-462)

0011. GLOBE SILO CO. 30 - - 10" with a jaw crack, otherwise Good++. (R1-202)

0012. BEAVER SILO & BOX MFG CO / 33 - 5/8 - - 10.75" Single socket variant. Good++ . (R1-44)

0013. INDEPENDENT SILO CO / 5/8 - 12". Good+. (R1-248)

0014. CROWN SILO with a "CH" logo / CROWN LUMBER & SILO CO - OMAHA - - 12". Good++. (R1-119)

PiCs Lots 1 thru 14

0015. TORNADO - SILO / W. R. HARRISON - MASSILLON O - - 8" with 5/8" slot milled out of back side. This wrench was purchased at the 2006 Ed and Judy Friedman auction. Good++. (R1-457)

0016. SIMPLEX INC. - 58 / MARSHFIELD WIS - - 8.5" silo type wrench. The other two Simplex wrenches we have listed were both No. 56 not 58. Good+, painted. (R1-426)

0017. CRAINE SILO CO INC. - - 9" single hex box. Good++. (R1-117)

0018. UNADILLA SILO CO - 30 - - 10". Open end by double box end. Pitting. (R1-462)

0019. NAPPANEE SILOS - 3/4 / NAPPANEE LUMBER & MFG. CO. (Nappanee, Ind.) - 1/2 - 5/8 - - 10.25" double hex box. Good+. (R1-346)

0020. T. B. WOOD'S SONS - CHAMBERSBURG, PA. - 5/8 - - 10.75". Pitted. (R1-493)

0021. Marked only No. 4 (orphan) - - 13.75" double box end. Excellent.

0022. 591 (Papec - Shortsville, NY) - - 12" single hex box silo filler wrench. Good++. (R1-368)

0023. ONEIDA STEEL PULLEY CO / ONEIDA. N.Y. - - 10.5". Excellent. (R1-362)

0024. ONEIDA / NO 3 - - 10.75" Good++.(not in Rathbone see R1-362)

0025. MORRIS / 5/8 - - 12.5" single hex box silo type wrench. Good++. (see R1-340)

0026. NICHOLSON / 2 - - 11" Good++ (R1-352)

0027. VESPER WOOD MFG CO / VESPER WIS -10.5" double hex box. Pitted. (R1-473)

PiCs Lots 15 thru 27

0028. Lot of Three: Lot of Three Silo Type Wrenches
will be sold choice wrench
(1.) CHAIN BELT CO. - 5/8 / MILWAUKEE WIS - - 10.5" Good++ (R1-92)
(2.) CHAIN BELT CO. - 1/2 / MILWAUKEE WIS - - 8.75" Good++ (R1-92)
(3.) CHAIN BELT CO. - 7/16 / MILWAUKEE WIS - - 7.5" Good++ (R1-92)

0029. Lot of Two: Silo type Wrenches
(1.) FAST'S COUPLING / 2 - - 11" Good++ (R1-176)
(2.) FAST'S COUPLING / 1 - - 8.75" Good++ (R1-176)

0030. Lot of Four: Bond Foundry & Machinery Co. of Manheim, Penn. Silo type Wrenches.
Will be sold choice Wrench.
(1.) BOND - 5 - - 13". Painted. (not in Rathbone)
(2.) BOND - 3 - - 6.5". Excellent. (R1-58)
(3.) BOND - 2 - - 8.75". Good++. (R1-58)
(4.) BOND - 1 - - 12.5". No patina. (R1-58).

0031. Lot of Two: Balata & Textile Belting Co. Wrenches (Easton, Penn.)
(1.) VB & TB CO - EASTON PA - 11/16 / FOR PETROL CLAMPS - - 9" Good++ (R1-468, R1-224)
(2.) VB & TB CO - EASTON PA - 1/2 / FOR PETROL FASTENER - - 9" Good++ (R3-224)

0032. Lot of Two: Silo Type Wrenches
(1.) 37D219 (and Illinois Malleable Iron's "I" & "M" logo) (orphan) - - 9.25" single hex box end. Good++. (not listed, no info)
(2.) 53D230 (orphan) - - 10". Good++. (not listed, no info found)

0033. Lot of Six: Silo Type Wrenches
(1.) Marked only "2" - - 11" single hex box. Good+.
(2.) 5/8 / 5/8 - - 10.5" single hex box. Good++.
(3.) 5/8 - X logo - - 8.75" single hex box. Excellent.
(4.) Unmarked - - 8.75" single hex box. Good+.
(5.) KS - 5/8 - - 9.5" single hex box. Good++.
(6.) Unmarked - - 8.75" single hex box. Good++.

PiCs Lots 28 thru 33

Oddball and Orphan Wrenches (Lots 34 - 74)

0034. No markings (orphan) - - 13.25" oddball. Good++. (not in Rathbone)

0035. No markings (orphan) - - 13.5". Good+. (R1-504)

0036. No markings (orphan) - - 9.5". Good++. (not in Rathbone)

0037. No markings (orphan) - - 9.75" oddball. Good++. (not in Rathbone)

0038. No markings (orphan) - - 11.25" oddball. Good++. (not in Rathbone)

0039. No markings (orphan) - - 1.745 extra nice oddball. Excellent. (not in Rathbone)

0040. No markings (orphan) - - 13.5" oddball. Pitted. (R1-504)

0041. No markings (orphan) - - 11.75" oddball. Not cleaned, pitting. (not in Rathbone)

0042. No markings (orphan) - - 12" oddball. Excellent. (R1-504)

0043. No markings (Whitman & Barnes) - - 11.75" oddball. This style wrench is shown in early Whitman & Barnes catalogs. Good, bent, pitted. (R1-504)

0044. No markings (orphan) - - 8" oddball. Probably excellent under the new black paint. (not in Rathbone).

0045. No markings (orphan) - - 4.25" small oddball. Excellent. (not in Rathbone)

0046. No markings (orphan) - - 7" oddball. Excellent with original paint? (not in Rathbone)

PiCs Lots 34 thru 46

0047. No markings (Messinger Mfg. Co. - Tatamy, Penn.) - - 10". Also looks like a marked Walter Wood's Wrench. Good++. (see Rathbone R2-198, 199 and R1-494)

0048. No markings (orphan) - - 8" oddball. Excellent. (not in Rathbone)

0049. No markings (orphan) - - 10" oddball. Good++. (not in Rathbone)

0050. Marked only "E" (orphan) - - 8.25" oddball with cutouts on the shaft. Good++. (not in Rathbone)

0051. No markings (orphan) - - 8.5" oddball with fancy cutouts on the shaft. Similar but different than Lot #50 above. Good+. (not in Rathbone)

0052. No markings (orphan) - - 9.25" oddball. Good++. (not in Rathbone)

0053. No markings (orphan) - - 6.75" oddball propeller style wrench. Also found d marked "XXX". Excellent. (not in Rathbone)

0054. C. W. 24 (Cohoe & Walster - Junee, New South Wales, Australia) - - 14.75". Big impressive looking wrench with a large hammer head extension. Good+, not cleaned. (R3-51)

0055. No markings (orphan) - - 13" oddball. Thirteen hole variant. Good++. (not in Rathbone)

0056. No markings (orphan) - - 13.5" oddball. Good+. (not in Rathbone)

0057. No markings (orphan) - - 9" fancy oddball also seen marked "22". Good++. (R1-504)

0058. Lot of Two: Oddball Wrenches
(1.) No markings (orphan) - - 6.75" oddball. Excellent.(R1-504)
(2.) No markings (orphan) - - 7" oddball with prominent hammer head. Good+. (not in Rathbone)

0059. No markings (orphan) - - 11.75" oddball. Excellent.(R1-504)

PiCs Lots 47 thru 59

0060. Lot of Three: Unmarked Oddball/Orphan Wrenches. 9" to 10.5". (not in Rathbone)
Two are similar to the Oliver F153 wrench.

0061. Lot of Three: Oddball/Orphan Wrenches. 8.75" to 9.5". All have some pitting. (not in Rathbone)

0062. Lot of Three: Oddball/Orphan Wrenches. 6" to 9". (not in Rathbone)
Flat steel one is marked PAASCHE (in script) and UW1

0063. Lot of Two: Oddball/Orphan Wrenches. 8.5" to 9". (not in Rathbone)
Larger one looks like P. P. Mast No. C176. (pitted).

0064. Lot of Two: Oddball/Orphan Wrenches. 7.75" to 9". (not in Rathbone)

0065. Lot of Five: Small Oddball/Orphan Wrenches. 4.5" to 6". (not in Rathbone)

0066. Lot of Four: Unmarked Oddball/Orphan Wrenches. 6.25" to 7.5". (not in Rathbone)

PiCs Lots 60 thru 66

0067. Lot of Seven: Four Scythe Snath Wrenches (one marked with a "M" logo), a Pickering Governor Wrench (R3-175) and Two Misc. Wrenches. 3" to 4.5".

0068. Lot of Two: Similar Look-a-Likes
(1.) Unmarked (272 Superior Drill Co. Rathbone also shows the 272 wrench under A. C. Evans and Kingman Plow Co) - - 10" with the jaw extension. Excellent. (R1-284, R1-446, R2-11, R2-92,)
(2.) 295 (P & O later IHC) - - 9.25". Five open ends, offset on small end variation. Some pitting. (R1-371)

0069. No markings - - 10.5" oddball with hammer head. similar to Wilkinson Plow Co. and No. 90 Tudhope Anderson wrenches but without the square box opening. Good+. (see R1-489)

0070. Unmarked - - 7.25 " bed key wrench with seven different size wrench openings and a screwdriver. Excellent. (S881).

0071. No markings - - 9.25" buggy type wrench with a nail claw on one end. Good+, not cleaned. (listed in a1880 Belknap catalog)

0072. M215EE - - 7" oddball combination wrench with six sizes, came with Craftsman welders. Good+.

0073. Lot of Two: Oddball Tee Type Wrenches
(1.) G E MOODY CO. - - 3.25" x 5.5" oddball tee wrench with a flat hammer head. Excellent. (not listed, no info found)
(2.) No markings (orphan) - - 4.75" X 6" with two open sided sockets and an open end. Good++. (not in Rathbone)

0074. Lot of Four: Farmer's Style S-Wrenches. One is shop made. 10.5" - 13.5"

PiCs Lots 67 thru 74

0075. 95 - VULCAN PLOW CO / EVANSVILLE IND - - 7.25". Good+, painted. (R1-475)

0076. 96 VULCAN PLOW CO / EVANSVILLE, IND - - 7.5". Good++. (R1-475)

0077. VULCAN PLOW CO / EVANSVILLE, IND - - 10". Pitting. (R1-475)

0078. V265A (Canadian McCormick-Deering / IHC) - - 12". No IHC logo variation. Good+. (R255)

0079. W. P. CO. (Wiard Plow Co. - Batavia, NY) - - 9.5". Good++, no finish. (R1-488)

0080. Unmarked (South Bend Chilled Plow Co. - South Bend, Indiana) - - 15.75" plainer version of South Bend's "Octagon" wrench. Used on South Bend's New Casaday Sulky Plows. Good+ with some edge dings. (R2-267)

0081. Unmarked (South Bend Chilled Plow Co. - South Bend, Indiana) - - 16.5" big graphic wrench with several cutout sections. Used on South Bend's New Casaday Sulky Plows. Labeled "Octagon" in South Bend Parts Books and nicknamed "The Three Pound Wrench" by collectors. Good++. (R1-429)

0082. STAR DRILL 100 (Norris & Brother - Rushville, Ind.) - - 7" with hammer head. Excellent. (R437).

0083. MF 124 STD (orphan) - - 7"cast wrench with four open ends. Light pitting. (Not listed, no info found)

0084. R-I. P. Co - L049 / Hay Loader (Rock Island Plow Co.) - - 7.5". Missing one jaw otherwise excellent. (R1-400)

0085. OK CHAMPION / 59 (Champion Potato Co., Hammond, Ind.) - - 8". Good++. (R1-94)

0086. AB 1P (orphan)- - 8.5" hammer wrench Good++.

0087. A ELLWOOD - - 7" with a hammer head. Some pitting. (R1-161)

PiCs Lots 75 thru 87

0088. U10 / U (orphan) - - 9.5" chilled plow type. (R1-461).

0089. U S / U S (orphan) - - 9.75" chilled plow type. Good+ with some pitting. (R1-461)

0090. E13 (Moline Plow Co) with Moore's "M" in a circle logo - - 9" chilled plow type. Excellent. (R3-157)

0091. 8 & 9 (orphan) - - 9" chilled plow type. excellent.

0092. 13 (orphan) - - 9.5" chilled plow type. Rare wrench but has some pitting. (not listed, no info found)

0093. K-L72 (E. W. Ross - Springfield, Ohio) - -11" silo filler wrench. Good+. (R1-402)

0094. D44 - RODERICK LEAN (Mansfield, Ohio) - - 10" by 15.5" tee socket wrench with center hex . Excellent. (R1-294)

0095. UX5 / 1/2 (Gehl Bros. and Western Land Roller) - - 15" Silo filer wrench. Good++. (R2-112, R2-292)

0096. HACN. I. E. KAUEHEHB - 1/2 - 5/8 / A. FFH KCAHAPOBHB - - 9" cast wrench with two open ends and one square box end. Good+, some pitting. (not in Rathbone?)

0097. BCIA SZAPIRO 1/2 - 5/8 - 3/4 / LIDA - - 10" cast wrench with three open ends. Note: Lida is a city in western Belarus. Good+ with some pitting. (not in Rathbone)

0098. Unmarked (like Charles G. Allen and Belcher & Taylor No. 32 wrench) - - 8." wrench and pitman tool. Good+. (R1-9)

0099. C. D. EDWARDS MFG. CO - 108 - - 11.75". Good+ with light pitting. (R1-159)

PiCs Lots 88 thru 99

0100. Lot of Three: Strap Type Pipe Wrenches
(1.) Marked only "TO1020" - - 12.75" with extra long leather strap. Good++. (not listed, no info found)
(2.) Marled only "642" - - 9" with unusual cast handle. Excellent. (not listed)
(3.) REDA MFG. CO./- WOPRCESTER, MASS. - - 11". I have seen universal drain plug and hubcap wrenches made by Reda but this is the first strap type pipe wrench I have seen. Good++. (not listed)

0101. COLEMAN'S - 2 - - 10.5" strap type pipe wrench with cast handle. Excellent. (not listed, no info found)

0102. WARNOCK / PAT JUNE 5 1900 - WORCESTER MASS - - 11.5" malleable strap wrench. Patented by Amos W. Warnock of Boston, Mass. Also found marked PAT FEB. 18, 1919 (see Lot No. CB35-5). Wrench and strap are in Excellent condition with large bold markings. (S139)  PAT

0103. NIKE ESKILSTUNA - SWEDEN / Nr. 8B - 2984 - - 11.25" reversible ratchet wrench with a deep hex socket and a tire tool or pry bar end. Good+, painted. (S786)

0104. 6-8 IN. CRESTOLOY STEEL MADE IN USA / MFD. BY CRESCENT TOOL CO. - 8" double ended Crescent adjustable wrench with 6" and 8" heads. Good++.

0105. CRESCENT TOOL CO. / 8-10 CRESCENT - - 10" double ended older type Crescent adjustable wrench with 8" and 10" heads. Good++.

0106. Weak markings but can read "W & W" - - 9" single jaw turn handle to adjust coach wrench with hammer head and four paneled handle. Good+.

0107. GEBR. HELLER - D.R.G.M. - STAHL GESCHMIEDE - - 8" all metal twin jawed turn handle to adjust nut wrench with round knurled handle. Good++.

0108. Lot of Two: Twin Jawed Turn Handle To Adjust Nut Wrenches
(1.) SZEKELY JGNACZ / SCH - - 8.75" with ribbed round handle.
(2.) STAHL - - 4" with knurled round handle. Good+.

PiCs Lots 100 thru 108

0109. PAT FEB 1 '98 (Joy Wagon Wrench) - - 14.25" cast adjustable wagon wrench patented by Aden Joy of New Market, NH. Lever and screw adj with wooden spinner handle. Good Plus (S221)  PAT.

0110. T G MANDT WRENCH 10 (star logo) - PAT JUNE 13 1896 (T. G. Mandt Mfg. Co. - Stoughton, Wis. - later Moline Plow Co.) - - 10." wagon hub wrench and hitch pin. Star logo variation. Applicable patent was issued to William John Leach of Brighton, Wisc. on Jun. 30, 1896. Pitted. (S215, R1-307, C210)  PAT

0111. KWIK-WAY - CEDAR RAPIDS ENGINEERING CO. OF DELEWARE - CEDARS RAPIDS, IOWA - US PATENTS 2,159.354 - 2,159,373 - - 13" odd 3/8" drive torque wrench. Patents were granted to Allen I. Dunn of Cedar Rapids, Iowa on May 23, 1939. Good+.  PAT

0112. AMCO TORQUE INDICATOR - MODEL 1050 - CAPACITY 175 FT. LBS. - AMCO TOOLS INC. - NORTH CHICAGO, ILL - USA PATENTS 2,283,888 - 2,320,023 - RE22,210 - CAN. PAT NOS. 383,523 - 383,521 - - 19.5" 1/2" drive torque wrench. First USA patent was granted to Herman W. Zimmerman of Highland Park, ILL. on May 19 1942 and assigned to Maintenance Machinery Co., North Chicago, ILL. wrench seems to work but the metal dial is dented and most of the markings are not readable, has a small drilled hang hold.  PAT

0113. BILLMONT MASTER WRENCH PATENTED AND PATENTS PENDING - MFG. BY EDGAR C. GUTHARD CO. (Chicago, IL) - - 13.75" ratchet that operates by turning the end of the handle. Patented July 22, 1919 by George Rice Fullenwider of Fairfield, Montana. Good+, hard to turn. (S186)  PAT.

0114. Unmarked - - 9" early reversible ratchet wrench with heavy cast handle. Patent was granted to Victor Carlson of Peoria, IL on Sep. 01, 1908 and was probably made by the U. S. Ratchet Wrench Co. of, Peoria, IL. Ratchet comes in a shop made wooden box with sliding lid and six hex and one square pressed steel sockets. Most of the sockets are marked with the Mossberg logo. Ratchet mechanism is working, has some pitting.  PAT

0115. IMP. ANGLE WRENCH / BLOOMINGTON, ILL - PATENTEED .- - 9" Crescent type with a button that allows the head to be set at various angles. Mfg. by the Imperial Tool Co. of Bloomington, Indiana and patented by Ransom Bovee of Chicago, Illinois on Nov. 21, 1916. Good with light pitting. (S311)  PAT.

0116. 10 - 12 DIAMOND CALK HORSESHOE CO / DAMALLOY logo - with horseshoe logo - - 12" (10" and 12" heads).double ended Crescent type wrench. Rare largest size. Good+ with some areas of pitting .

0117. DEMUTH STEEL PRODUCTS CO. CHICAGO - - 10.5" (smaller variant) cast ratchet silo wrench with female hex drive and correct cast hex socket marked "5/8" H". Patent was issued to Gordon K. Wright of Hinsdale, Illinois on Mar. 10, 1914. Note: Besides Demuth Steel Products Co. there are at least two other manufactures names found on this wrench. Good++. (R2-78)  PAT

0118. Marked only 11 (David Bradley?) - - 8" all metal cast Vandegrift wedge adjust alligator wrench patented 1-6-1891. Bradley pats lists show this wrench in 10: size as "473A - old #11). Good++ with broken jaw spring. (see R1-127)  PAT

0119. The Prince - PAT'D MAY 11, 1909 - - 12.5" combination adjustable nut and pipe monkey wrench and bit brace with screwdriver. Patented by P. E. (Prince Edward) Shortt of Floyd, Virginia. Complete with the original wing nut and brace pad which is usually missing. Good+ with some original plating, tight crack in the wooden grip. (S48)  PAT

0120. Lot of Three: Beryllium Non-Sparking Tools
(1.) W128 - BECU - C - USA - - 6" wedge. Good++. (new price $30.26)
(2.) H47 / AMPCO - - 12.5" - two pound double face machinist's hammer. Good+ with chips on face of hammer head.
(3.) H4 AMPCO / USA - 14" - 2.5 pound ball peen hammer. Good+ with chips on hammer head face.

PiCs Lots 109 thru 120

0121. THE BECKLIN WRENCH CO. SEATTLE, WASH / PAT MAR 16, 1920 - CARBON STEEL - - 14,25" quick adjust rack wrench with unique pivoting release lever. Patentees were John H. Lagreid and Oscar Becklin both of Seattle. Good++ with a drilled hang hole. Release lever needs a little attention as it has a tendency to lock up and not release. (S713)  PAT.

0122. LAKE SUPERIOR WRENCH CO - SAULT STE MARIE, MICHIGAN - PAT. PEND. - - 18" self adjusting nut and pipe wrench, early example with Patent Pending markings. Patented 9-7-1909 by William Hilliard Munro of Sault Ste. Marie, Ontario, Canada and 10-4-1910 by John Boulieu of Sault Ste. Marie, Mich. Good++. (S362)  PAT  and   PAT

0123. TOP HWJ-300 CAP 1/8-1-1/4 IN / TOP DROP FORGED - - 12.75" newer quick adjust wrench with an adjustable upper jaw. Good++. (not listed)

0124. STILSOMATIC TOOL CORP. - ANNAPOLIS, MD - PATENT NO. 2555399 (not all markings are readable) - - 13.5" variation of a Stillson type pipe wrench with an unique pivoting upper jaw. Patented on June 05, 1951 by Ottavio A. Capra - Jamaica, NY. I know this wrench is younger than most wrench collectors but it is the first one we have had to list. Good+ with most of the original warranty decal, the lower jaw inserts has been welded . (not listed)  PAT

0125. CRUISADER - 9 -= - 7.25" all metal Stillson type pipe wrench. Crusader was a Winchester house brand. They are several times rarer than marked Winchester tools. Excellent.

0126. SIERRA - P. E. CO. - - 20" fireman's combination hydrant wrench and hose coupling tool. Good++. (no info found)

0127. WESTCOTT / 10 IN PIPE - THE KEYSTONE MFG CO BUFFALO NY - - 10.25" with handle. Serrated solid non adjustable jaw rather than serrated insert as usually seen. Good++.

0128. A. H. ADAMS PIQUA, O - JAN 24, 99 - - 16.5" primitive looking nut and pipe wrench with a one piece lower jaw and handle assembly that is turned to adjust and a lever that positions the upper jaw,. Unique and RARE. Patent titled "Pipe and Nut Wrench" was granted to August H. Adams of Piqua, Ohio. Good++. (S583)  PAT.

0129. 14 CRAFTSMAN / MADE IN USA - - 13" screw adjust pipe wrench with patterned handle grip. Good++ with Craftsman decal.

0130. Unmarked (The Keith Wrench / Keith Mfg. Co. Aurora, ILL) - - 14.5" all metal version of the Keith Pipe Wrench with a self adjusting jaw that can be positioned in two different slots on the handle. . Patent of Mar. 10, 1891 was issued to Truman D. Keith of South Pasadena, Calif. Good+.(S684)  PAT.

0131. BONNEY STILLSON / ALLENTOWN, PA - MADE IN USA - - 19.25" Stillson type pipe wrench with wooden handle. Good looking well built wrench. I don't think I have sold one with the wooden handle before. Excellent.

0132. BONNEY MOTOR TRUCK WRENCH / ALLENTOWN, PA - - 10" Stillson type all metal pipe wrench. Good++. (S1104)

0133. MORRIS BLODGETT D. F. T. CO. - INDEP, MO / PAT JAN 18, 1911 FORGED TOOL STEEL - - 11.25" Pipe wrench. John Morris had left Kansas and lived in Marshalltown, Iowa when he patented this pipe wrench on Jan, 18, 1910 (not 1911 as marked on the wench) and evidently very few were made as they are seldom found and most of the ones seen have had a crack near the adjusting knurl, this one doesn't. Good++.  PAT.

0134. F. W. MACKE & CO QUICKSET - PAT'D APRIL 22 - 1919 / KOKOMO, IND - - 10.5" wood knife handled screw and quick adjust nut wrench. Patented by Joseph Nielander of Kokomo, Indiana. Good with several nicks and dings and light grind marks. (S511)  PAT

PiCs Lots 121 thru 134

0135. Lot of Four: Chain Detachers (Sell Choice Item)
(1.) STEEL CHAIN DETACHER - - 8". Good++.
(2.) HUDSON MACH. CO. . CHAIN DETACHER No. 7W - - 8.5", pitting.
(3.) Q5027 (IHC logo) - - 8". Good++.
(4.) TRASCO - A7476 / TRAXCO - M - - 7.5". Good++.

0136. Lot of Four: Chain Detachers (Sell Choice Item)
(1.) HERSCHEL STEEL CHAIN DETACHER / R. HERSCHEL MFG. CO. - PEORIA ILL - - 8.5". Good++.
(2.) PEORIA STEEL CHAIN DETACHER / PEORIA MALL. CASTINGS CO. - 325 - - 8". Excellent,
(3.) ALBERT LEA FOUNDRY - ALBERT LEA, MINN. - CD-58 / STEEL & ROLLER CHAIN DETACHERS - - 8". Good++.
(4.) JOHN DEERE (with JD logo) / J1480-H - - 8.5". Good++, painted.

0137. Lot of Four: Chain Detachers (Sell Choice Item)
(1.) BIG DUTCHMAN - CHAIN DETACHER / BIG DUTCHMAN - CHAIN DETACHER 0-00-0025 - - 8" Excellent.
(2.) No. 111 CHAIN DETACHER - - 8.5". Good++.
(3.) OLSON MFG. CO. - ALBERT LEA MINN. - CD-58 / STEEL & ROLLER CHAIN DETACHER - - 8" Good++ with original paint.
(4.) LINK-BELT (with dogbone logo ) / EASY CHAIN DETACHER NO. 1 - - 8.5" Good.++.

0138. Lot of Four: Chain Detachers (Sell Choice Item)
(1.) W-43-027 with Whitaker Tool Co. logo / ("B" in a circle logo) - - 8.5". Good+. Sell Choice
(2.) TEMCO - 101 / TEMCO - - 8". Good+.
(3.) LINK-BELT (with two dogbone logos) / EASY CHAIN DETACHER NO. 10 - - 8.5" Good.
(4.) HERSCHEL No. 111 CHAIN DETACHER / HERSCHEL - R. HERSCHEL MFG. CO. - PEORIA ILL - - 8.5". Good++.

PiCs Lots 135 thru 138

0139. Lot of Four: Two Chain Detachers and Two Lengths of Detachable Chain Sell Choice
(1.) WEARWELL STEEL CHAIN DETACHER - - 8". Good with several dings.
(2.) MOLINE IRON WORKS - A69 / MOLINE STEEL CHAIN DETACHER - - 7.75". Previous owner has welded an extension piece to the base probably so it could be held it in a vise.
(3.) 12" of detachable chain. Smaller size.
(4.) 23" of detachable chain. Larger size.

0140. Lot of two clevises with single open ended wrench/pins. 7.5" and 9". Good++.

0141. Weak markings, can't read (orphan?) - - 9.5" extra large clevis and single open ended wrench/pin. Good++. (not listed, no info found)

0142. Marked only "A" (orphan) - - 7" clevis with two single open ended wrench/pins. Excellent. (not listed, no info found)

0143. Unmarked (orphan) - - 7.5" clevis with a three opened wrench/pin. Painted (not listed, no info found)

0144. 1112 (orphan) - - 9" cast hitch or clevis pin with a three open ended wrench. Good+ with light pitting. (not listed, no info found)

0145. Unmarked (Parts List No. 176 - Stoddard Mfg. Co. - Dayton, Ohio, also A. Ellwood Co in Rathbone ) - - 9.5" hitch or clevis pin with a single open end and a square box opening. Light pitting. (parts list picture only at R1-441, R1-161)

0146. 32 (Wheel & Seeder Co., La Crosse, Wisconsin) - - 9" hitch or clevis pin and three open ended wrench. Good++. (R1-485)

PiCs Lots 139 thru 146

0147. HARVEY LTD - R173 / BOX HILL - MELBOURNE (Australia) - - 6.5". Pitting. (R2-127)

0148. MONMOUTH / 141 (Monmouth Plow Co. - Monmouth, IL) - - 9". Some pitting under new black paint. (R1-335)

0149. MORRISON - 260 (Morrison Plow Works - Ft. Dodge, Iowa) - - 10.25" Emerson style wrench. Good++ (R1-340)

0150. WR (Ohio Cultivator - Bellevue, Ohio) - - 8.5". Good++. (R1-357)

0151. MIDLAND MFG. CO. / 1 - TARKIO MO. USA - - 8.5". Good+. (R1-326)

0152. NICHOLSONS / 6707 (W. H. Nicholson & Sons - Newark, England) - - 11" with extra large, bold markings. Good++. (R1-353)

0153. G. A. KELLY PLOW CO. NO. 4 (Longview, Texas) - - 11.25" with a hammer poll. Good+. (R1-277)

0154. G. A. KELLY PLOW / 1 (G. A. Kelly Plow Co. - Longview, Texas) - - 6.5". Painted. (R1-277)

0155. HEILMAN PLOW CO / EVANSVILLE IND - - 7", rarer smaller size. Good++. (R1-228)

0156. M627 (Kirlin Plow Co, Kansas City, Missouri & Beattie, Kansas) - - 9". Not in Rathbone but found in a Kirlin Parts Book for Kirlin's Improved Tongue Disc Cultivators. Good+ with some minor dings.

0157. TAGUE & KERLIN WRENCH / MIDLAND MFG. CO. - TARKIO MO. USA - 2 - - 9". Painted. (R1-326)

0158. BLOUNT / 430 (Blount Plow Works - Evansville, Ind.) - - 10.25". Good++. (R1-58)

0159. MONMOUTH (Monmouth Plow Co. - Monmouth, IL) - - 7". Good++. (R1-335)

0160. E39 (Bateman) - - 8.75" with hammer head. Same wrench and part number as Iron Age Cut-out Wrench. Good++ with a tiny drilled hole. (R2-27)

0161. KENTUCKY DRILLS / BRENNAN & CO LOU. KY. KR299 (later IHC) - - 8.75". Good++. (R2-230)

0162. K396 (Walter A. Wood, Hoosick Falls, NY) - - 8" with spanner pegs. Excellent. (R1-494)

0163. HOKE MFG CO New Carlisle, Indiana) - - 8.5" with a hammer head. Scarce wrench in Good++ condition. (R1-235)

0164. MONARCH 226 (Lisle Mfg. Co. - Clarinda, Iowa) - - 4.5" with spanner pegs. A Monarch Cream Separator or a Monarch Pool Table wrench. Good++. (R1-297)

PiCs Lots 147 thru 164

0165. MAY BROS 37 (Gawler, South Australia) - - 9.25". Unusual shape and only the third one we have had to sell. Good++. (R1-316)

0166. W4 - H. P. M. CO. / STAR - - (orphan) - - 9". Shown in Rathbone but with no information. Good++. (R1-212)

0167. 28 (orphan) - - 10". Good++. (not listed, no info found)

0168. Hoosier Belle (St. Joseph Mfg. Co. - Mishawaka, Indiana) - - 9.5" Good+, pitting. (R1-433)

0169. 2P30 and a "P" in a circle logo / S (Madison Plow Co., later Fuller & Johnson) - - 9". One square box opening variant. Good++. (R1-191)

0170. FULLER & JOHNSON (Madison, Wisc.) / 2P30 - - 9". One square box opening variant. Pitted. (R1-191)

0171. MALSBARY 6180 - A2 (Holt Mfg. Co. - Stockton, Calif.) - - 13.5". Holt Mfg. made the Malsbary Gain Drill. No patina. (R1-306)

0172. ML15 (Cockshutt Plow Co.) - - 12" Good++. (R1-107)

0173. MORRISON / FORT MADISON (Morrison Plow Works - Ft. Dodge, Iowa) - - 8.25". As found, not cleaned. (R1-340)

0174. HAR'KING CO - X (same markings both sides) (Harvest King Co. - Harvey, Illinois) - - 5". Excellent. (R1-225)

0175. MORRISON MF'G CO (Morrison Plow Works - Ft. Dodge, Iowa) - - 10.25" Good+ with light pitting. (R1-340)

0176. W. P. CO. 71 (Wiard Plow Co. Batavia, NY) - - 9.5". Rarer three open ends variation. Good+ with some pitting. (R2-294)

0177. Marked only "M" (orphan) - - 9.25". Rathbone lists a "M" wrench for Kingman Plow Co. but no parts lists picture seen. Good++ with some pitting. (see R1- 284)

0178. 718 (Pattie Plow Co. - Monmouth, Illinois) - - 11.75". extra cutouts variation. Good++, does have three more holes than one in Rathbone. (R1-373)

0179. KING DRILL MFG CO (Nebraska City, Nebraska) - - 12". Excellent. (R1-282)

0180. BAMFORDS / S.T NO.5 (Uttoxeter, England) - - 9.5". Pitting. (R1-39)

0181. 12 (Gale Mfg. Co. - Albion, Mich.) - - 10". Good++. (R2- 109)

0182. 4271 (Avery - Peoria, ILL) - - 10.75". Carburetor wrench for large Avery Gas tractor. Good++, weak markings as usually found.(R2-18)

0183. H & S - 8 (Heebner & Sons - Lansdale PA?) - 11.5" Good++. (R1-212)

0184. MORRISON - 261 (Morrison Plow Works - Ft. Dodge, Iowa) - - 12" doe wrench with hammer. Good+ (R1-340)

PiCs Lots 165 thru 184

0185. MOLINE - RD1975 with a 'MI" logo - - 17.5". Large, odd and scarce Moline wrench. Good++. (R1-333)

0186. DANIEL HARVEY LTD / BOX HILL - MELBOURNE (Australia) - D59 - - 15". Good+, casting roughness, not cleaned. (R2-127)

0187. DANIEL HARVEY / BOX HILL (Australia) - - 21". Good+ with a casting flaw, not cleaned. (R1-124)

0188. B.F. AVERY AND SONS LOU. KY. / E1014 - - 18" large wrench with outstanding markings. Excellent with some of it's original finish. (R1-27)

0189. Unmarked (oddball / orphan) - - 23" large impressive looking wrench with decorative panels on each end, Good++. (not listed, no info found)

0190. CREAMERY - PACKAGE (Rock Falls, Illinois, Etc.) - 01-13890 - - 15.25". Large impressive looking wrench. Good++ with original finish. (not in Rathbone see R1-118, R2-68, R3-57)

0191. C. T. & E. S. CO. (Consolidated Telegraph & Electrical Subway Company) - - 15" with two five sided openings and three single open end openings. Excellent, uncleaned condition.

0192. Y247 (Hart Grain Weigher Co - Peoria, Illinois) - - 13.5" double hook spanner wrench for threshing machine feeder. Excellent but with two drilled holes? (R2-126)

0193. MILWAUKEE / 15395 - - 15.5" large hub type wrench. Usually seen without a part number. Good++, not cleaned. (R1-328)

PiCs Lots 185 thru 193

0194. A. T. & S. F. (Atchinson Topeka & Santa Fe Railroad) - - 16.5" heavy duty railroad track wrench. Markings are cast embossed rather than stamped as usually found. Good+ but the end of handle shaft is broken off.

0195. D22 (orphan) - - 14" "Holey" wrench. Good++, not cleaned. (Rathbone's Supplement lists a D22 wrench for Daniel Harvey, Ltd. but no illustration)

0196. CRANE / 17912 - - 16" Odd S-wrench with one small end and one extra large end. Excellent with some original finish, (R1-118)

0197. 5320 - 5 (orphan) - - 15.5" cast fire hydrant and hose coupling wrench. Excellent. (no info found)

0198. THE F. E. MYERS & BRO. CO. / ASHLAND, OHIO U.S.A. - 3774 - - 14.5". Excellent. (R1-344)

0199. HODGMAN MFG. CO. / TAUNTON, MASS. USA - - 14" double open ended wrench with large bold lettering. Good++. (R1-234)

0200. 293M with a CH logo (orphan) - - 13.5" single hex box end. Good++. (not listed, no info found)

0201. EMERSON (with a "L" in a square logo) / W1074 (Emerson-Brantingham, Rockford, ILL) - - 16.25". Excellent. (R1-163)

0202. W1074 / E-B in a diamond logo (Emerson-Brantingham, Rockford, ILL) also a "T" in a "D" logo - - 16.25". Good++, painted. (R1-163)

0203. HESTER PLOW CO - 1 (Jacksonville, Florida) - - 14.5" heavy, thick wrench. Good with edge hammer damage. (R1-232)

0204. HESTER PLOW CO - No. 5 (Jacksonville, Florida) - - 15.5". Rarest of the known Hester Plow wrenches. Overall pitting or casting roughness. (R1-232)

0205. N720 (E. W. Ross - Springfield, Ohio) - - 15.5 silo filler wrench. Good++. (R1-402)

PiCs Lots 194 thru 205

Deering Type Wrenches (Lots 206 - 229)

0206. H & A - 5 (Henry & Allen - Auburn, NY) - - 7.25" Deering Type. Good++. (R1-209)

0207. ARNHOLT - - 7.25" Deering Type. Excellent. (R1-21)

0208. HAYES / A116 (Hayes Pump & Planter Co. - Galva, Illinois) - - 7.5" Deering Type. Good++ with a casting flaw on back side. (R1-227)

0209. H V McKay / D324 (H. V. McKay / Massey-Harris - Sunshine, Australia) - - 7.25" Deering Type. Good++. (R1-323)

0210. R. & W. CO. - 6000 / MODEL (Rector & Wilhelmy - Omaha, Neb.) - - 7.5" Deering Type. Good++ with a small casting flaw. (R2-242)

0211. DEMPSTER (Dempster Mill Mfg. Co, - Beatrice, Neb) - - 7.25" Deering Type. Good++. (R1-143)

0212. NATIONAL - - 7.5" Deering Type with an additional small opening. (Good++. (R1-346)

0213. SIMMONS / BAY STATE - 7364 (Simmons Hardware Co. - St. Louis, Missouri) - - 7.25" Deering Type. Good+, not cleaned. (R1-426)

0214. SIMMONS / UTILITY(Simmons Hardware Co St. Louis) - - 7.25" Deering Type. Good+. (R1-426)

0215. MTM CO / 1W (Minneapolis Threshing Machine Co. Stillwater, Minn.) - - 7.5" Rare Deering Type wrench, about twice as thick and one opening smaller than found on most Deering Type wrenches. Good+. (R1-329)

0216. K18 (orphan) - - 7.25" Deering Type with an extended square opening. Rare wrench, over cleaned, some pitting. (not listed, no info found)

0217. MAXWELL / MAXWELL (Paris, Ontario, Canada) - - 7.5" Deering Type. Pitted. (R1-315)

0218. LETZ - E782 / "P" in a square logo (Letz Mfg. Co. - Crown Point, Indiana, later John Deere) - - 7" Deering Type. Excellent. (R1-296, D308)

0219. WITTES / UTILITY (Witte Hardware Co. - St, Louis, Mo.) - - 7" Deering Type. Pitted. (R2-298)

0220. A J HARWI / UTILITY (Atchinson & Wichita, Kansas) - - 7.25" Deering Type. Good+. (R1-226)

0221. WYETH / ST JOSEPH - 6000 (Wyeth Hardware Co) - - 7.25" Deering Type. Good++. (R1-500)

0222. HARVESTER KING CO - W / HARVESTER KING CO. - W - - 7.25" Deering Type with pitting. (R1-225)

0223. D324M (H. V. McKay / Massey-Harris - Sunshine, Australia) - - 7.25" Deering Type. Good++. (R2-191)

0224. 67 (Moline Iron Works - Moline, Illinois) - - 7" Deering Type. Good++. (R1-331)

0225. 7364L (Wm. E. Pratt Mfg. Co. - Chicago, Illinois) - - 7.25" Deering Type. Good+, some spots with pitting. (R1-385)

0226. 20 (R. Herschel Mfg. co. - Peoria, Illinois) - - 7.25" Deering Type. Good++ (R1-231)

0227. B. M. & S. H. CO. / MOHAWK (Blish, Mize, and Silliman Hardware Co. - Atchison KS) - - 7.25" Deering Type. Pitted. (R2-21)

0228. J. S. & CO - 6000 / UTILITY (Janney, Semple & Co. - Minneapolis, Minn.) - - 7.25" Deering Type. Good+ with some pitting. (R2-148)

0229. J. S. H. & CO. - 6000 / UTILITY (Janney, Semple, and Co. - Minneapolis, Minn.) - - 7.25" Deering Type. Good+ with light pitting. (R2-148)

PiCs Lots 206 thru 229

0230. 12-18 (orphan) - - 9" oddball. Good+. (not listed, no info)

0231. 55 (orphan) - - 10.5" oddball. Good+. (not listed, no info found)

0232. S20 (orphan) - - 10.25" oddball. Pitting. (not listed, no info found)

0233. Marked only "1" (orphan) - - 10.5" neat looking oddball. Good++. (not listed, no info found)

0234. 474 (Ontario Drill Co. - East Rochester, NY) - - 7". Good++. (R2-226)

0235. 18 or 81? (orphan) - - 10.25" oddball cross shaped cast wrench. Good+. (not listed, no info found)

0236. Marked only "3" (Kingman Plow Co.? - Peoria, Illinois) - - 8". Pitted. (Rathbone shows this No. 3 wrench for Kingman Plow Co. but with no parts list proof)

0237. HY (orphan) - - 8" Good+ (R1-212)

0238. 41 (orphan) - - 10". Good+. (Rathbone's Supplement lists a No. 41 wrench for Twin Cities but no illustration)

0239. 768 (Adriance, Platt & Co. - Poughkeepsie, NY) - - 8". Good++, no patina. (R1- 5)

0240. 57 (orphan) - - 7.25" oddball with a hammer poll. Excellent. (not listed, no info found)

0241. HC (orphan) - - 7.75". Good. (R1-211 with no info)

0242. Marked only "5" (orphan) - - 10". Good+. (Rathbone's Supplement lists a No. 5 wrench for Belcher & Taylor and Munnsville Plow Co. but no parts list illustration)

0243. .HSP (orphan) - - 10". Excellent. (R1-212 with no info)

0244. CG 2 (orphan) - - 8" oddball with spanner pegs. Excellent. Similar to wrench marked only "CG". (see R3-39, no info)

0245. 378 (Frost & Wood) - - 7.25" Good++ (R1-188)

0246. 916 (Monitor Drill / Moline Plow Co.) - - 7". Good with casting flaw, some pitting. (R1-332, R1-334)

0247. 44 (Brown-Manly Plow Co. - Malta, Ohio) - - 8.25". with hammer poll. Good++. (R1-66)

0248. 575 (Goold, Shapley & Muir Co. - Brantford, Ontario, Canada) - - 7.25" cast windmill company wrench. large high relief markings variation. Good+, not cleaned. (R2-116)

0249. Lot of Two: Orphan Wrenches
(1.) S & T / S & T (orphan) - - 5" fancy malleable cast wrench with five openings. Excellent. (R1-409 with no info)
(2.) 541 (orphan) - - 7.25" oddball with three open ends and an extended square box end. Good++. (not listed, no info found)

PiCs Lots 230 thru 249

Brass, Beryllium and Aluminum Wrenches (lots 250 thru 274)

(also see Lot 120)

0250. AMPCO W210 - 1 - USA - - 11" non-sparking Ridgid type pipe wrench. Excellent, like new. (new price $221.75)

0251. AMPCO W1148 - MADE IN USA - - 14" non-sparking adjustable Trimo type monkey wrench. Good++. (new price $307.75)

0252. AMPCO W213 - 14 / MADE IN USA - - 13.75" non-sparking Ridgid type pipe wrench. Excellent, like new. (new price $246.06)

0253. AMPCO W212 - 18 / MADE IN USA - - 17" non-sparking Stillson type pipe wrench. Good+ with scratched owner's ID "SO & CO" etc. (new price $246.06)

0254. AMPCO W82 - MADE IN USA - - 11.25" non-sparking double open ended wrench (1-1/4" by 1-1/16"). Excellent with original Ampco Safety Tools decal. (new price $80.46)

0255. AMPCO W254 - 1-5/8 - USA - - 19.5" heavy non-sparking construction or spud wrench. Offset type with aligning end. Good+, minor dings. (new price $155.30)

0256. WIZARD ALL-PLUG NON-SPARKING - MILWAUKEE NO 121 - - 17.75" barrel bung wrench for several different types and sizes of barrel plugs. Excellent, like new.

0257. AMPCO W3250 - 1-1/16" x 1-1/4" - USA - - 17" double box end non sparking wrench. Good++. (new price $132.60)

0258. AMPCO - W3180 - USA - 3/4" x 7/8" - - 12" double box end non sparking wrench. Excellent, like new. (new price $60.65)

0259. AMPCO W3220 - 7/8" x 1-1/16" - USA - - 15" offset double box end non sparking wrench. Excellent, like new. (new price $115.90)

0260. AMPCO - W3150 - USA - 9/16" x 5/8" - - 9" double box end non sparking wrench. Excellent, like new. (new price $55.18)

0261. AMPCO - W3180 - USA - 3/4" x 7/8" - - 12" double box end non sparking wrench. Excellent, like new. (new price $60.65)

0262. BERYLCO W991 - BECU - 9/16" x 5/8" - - 9.5" double box end non sparking wrench. Excellent. (new price $47.96)

0263. AMPCO - W3180C - ALBR - 3/4" x 7/8" - - 12.5" double box end non sparking wrench with flat wide shaft. Excellent. (no longer available new)

0264. BERYLCO W990 - BECU - 7/16" x 1/2" - - 7.75" double box end non sparking wrench. Excellent. (new price $43.54)

0265. AMPCO W6980 - ALBR - USA - 3/8" x 7/16" - - 5" non sparking double open ended wrench. Excellent, like new. (new price $37.62)

0266. BERYLCO W991 - BECU - 9/16" x 5/8" - - 9.25" double box end non sparking wrench. Excellent, like new. (new price $47.96)

0267. AMPCO W7431 - MADE IN USA - 1" X 1-1/8" - - 11" non sparking double open ended wrench. Good++.

0268. AMPCO W141R - 1808560-2 - - 10" non sparking 1/2" drive ratchet with push thru drive plug. Excellent, like new. (new price $263.25)

0269. Unmarked - - 16" brass 4-1/2 pound hammer. Some mushrooming, dings.

0270. AMPCO H20 - USA - - 5.5" non sparking claw handle (head only). Good with dings on the hammer face and edges. (new price $67.60)

0271. Ampco H70 - ALBR - USA - - 17" non-sparking 5-1/2 pound blacksmith's sledge hammer with original handle marked AMPCO. Good++ with minor dings on hammer faces. (new price not found)

PiCs Lots 250 thru 271

0272. AMPCO W212-1A- 14 - - 14" aluminum Rigid type pipe wrench with non-sparking jaw inserts. Excellent. .

0273. SCHICK - - 13" aluminum Rigid type pipe wrench with steel jaw inserts. Good++.

0274. "TOLEDO" HEAVY DUTY / TOLEDO PIPE THREADING MQACHINE CO. - TOLEDO, OHIO - 18"- - 16.5" aluminum Rigid type pipe wrench with steel jaw inserts. Good++.

0275. CRAFT 14 IN. / CRAFT - P. M. I. CO. (Pittsburgh Malleable Iron Co) - PAT NOV 1907 - - Open gear variant. Only second Craft wrench I've seen from this manufacturer. Patented Nov. 12, 1907 by George Heckling of Cleveland, Ohio. Good+. (C251)  PAT

0276. CRAFT 10 IN. / THE CRAFTSMAN TOOL CO. CONNEAUT, O. - PAT NOV 1907 - - 11" roller jaw quick adjust pipe wrench, open gear variant. Good++. (S663, S664)  PAT

0277. CRAFT 24 IN. / THE CRAFTSMAN TOOL CO. CONNEAUT, O. - PAT NOV 1907 - - 24" roller jaw quick adjust pipe wrench, open gear variant like Lot 276 above but in the scarce largest 24" size. Strap across the two lower jaws halves had been repaired, A few teeth on the upper jaw are damaged. (S663, S664)  PAT

0278. BEMIS & CALL COMPANY - SPRINGFIELD, MASS. (some markings are not on wrench) / (Bemis & Call logo) - B & RR (Baltimore & Ohio Railroad) - - 12.5" all metal center screw adjust nut wrench with short hex adjusting nut. The top jaw has been rounded off. Looks professional machined and may have been modified at the B & O shop to suit a special purpose. Excellent.

0279. WIZARD - THE RICHARDS MFG CO AURORA, ILL - PATENTED MAY 21, 07 OTHER PATS PENDING - - 8" adjustable wrench that combines a double screw Crescent type adjustment on a ratcheting head. Patented by Joseph N. Noyer of Gould City, Washington. Good++. (S156T)  PAT

0280. 15" TRIG-O-MATIC - PAT PEND. / TRIG-O-MATIC TOOL CORP. - CHICAGO USA - FORGED STEEL with a "D" in a diamond logo) - - 16.5" self adjusting pipe wrench with a spring loaded pivoting upper jaw. Patented by John Larson of Chicago on July 14, 1953. Fair with a weld repair and grind marks. (S720)  PAT

0281. Markings are weak but should read LINDSAY'S PATENT - DEC 12, 1865 - - 15" wood handled monkey wrench with a reinforcing bar on top of the shaft under the upper jaw. Patented by John Parker Lindsay of New Haven, Conn. This wrench was manufactured by several different companies including A. G. Coes & Co. (see HP16). Good+ with several dings and dents and a tight handle crack.  PAT

0282. TIGER NO. 20 - REED MFG. CO. ERIE, PA. USA. / PAT. AUG. 10, 97 - - 21" self adjusting wrench with spring loaded pivoting upper jaw Patented by Albert Katzki of Erie, Penn. Scarce large size with the TIGER imprint variation. Good+ with a couple minor casting flaws.  PAT.

0283. Unmarked - - 9.75" wooden handled sliding wedge adjust alligator wrench, smooth jawed nut wrench version. Pat 1-6-1891 by Theodore Vandegrift of Shelbyville, Indiana and mfg. by the Vandegrift Mfg Co of Shelbyville, Indiana. Sliding wedge is pitted, handle is poor. (C313)  PAT

0284. GATES ???? WRENCH (Gates Bolt Wrench) - - 10.25" all metal nut wrench with an unique adjusting screw on top of upper jaw. Pat. by Alfonso D. Gates of Cleveland, OH and mfg. by the Lorain Wrench Co. of Lorain, OH. Good+, markings not all readable as usually found. (S391)    PAT.

PiCs Lots 272 thru 284

0285. Lot of Two:
(1.) NO. 1 - MADE IN USA (with Mossberg logos) - - 7.75" cotter key tool. Excellent with plated finish.
(2.) Unmarked - - 11.5" "What's It" (automotive valve tool?). Whatever it is, it's in excellent condition.

0286. CRESCENT TOOL CO - JAMESTOWN , NY / 4" DROP FORGED - MADE IN USA - - 4" early type Crescent adjustable wrench Excellent with original box marked A14 CRESCENT ADJUSTABLE WRENCH - 4 - INCH POLISHED.

0287. Lot of Five: Adjustable Nut Wrenches
(1.) M. KLEIN & SONS / 500-12 - CHICAGO USA - - 12" Crescent type adjustable wrench. Excellent with plated finish.
(2.) WESTCOTT - KEYSTONE MFG. / 6 INCH NO. 76 - BUFFALO NY USA - - 6" S-handled Crescent type wrench. Good+. .
(3.) ROBINSON / DROP FORGED STEEL - - 8" curved handle Crescent type wrench Good++.
(4.) 9 IN. KEYSTONE NO. 79 / KEYSTONE MFG. CO. - BUFFALO, NY USA (star logo) - - 9" Crescent type adjustable wrench. Good+.
(5.) SNAIL BRAND / MADE IN ENGLAND - - 11.5" automobile type adjustable nut wrench. Painted with some hammer dings.

0288. FARMER'S EVER READY TOOLKIT / DROP FORGED STEEL - - 11.5" combination fencing tool with a hatchet, hammer, alligator wrench, pliers, screwdriver. etc. Good+ (Smith No. 20, S803)

0289. AT LA DEBONDEUSE-BREVETE. SGDG / JUSTINIER GARCIN. MARSEILLE.- - 10.5" (extends to 16.5") French cast iron wine barrel makers cooper's tool with a hammer, small hatchet type blade. with a hollow handle and sliding hammer type extractor with corkscrew type end (for bung hole plugs?). Would grade excellent except for a few minor chips on hammer edges, great patina.

0290. FARMER'S EVER READY TOOLKIT / DROP FORGED STEEL - - 11.5" combination fencing tool with a hatchet, hammer, alligator wrench, pliers, screwdriver and more. Good+, hatchet blade does show sharpening grind marks. (Smith No. 20, S803)

0291. Unmarked - - 9" combination hatchet, hammer, nail puller and screwdriver with wooden slab handles. Excellent with plated finish.

0292. 20TH CENTURY / THE BRIDGEPORT HARDWARE MFG. CORP. - MADE IN USA - -12.75" box or crate tool with hammer, nail claw and pry bar with a nail claw and wood slab handles. Patented by Willis Hobbs of Bridgeport, Conn. on Dec. 30. 1913. Good++. (Hammer Book 27-1)  PAT

0293. PAT'D JULY-28 -1903 - A.T. NELSON - WILTON, IOWA - - 11.25" tinner's hammer. Patent informs that this is a hammer for tinners use with a projecting flange to spread the interlocking seams if they have become closed during shipping, etc. This hammer was originally purchased years ago at the estate auction of the inventor in Iowa. Excellent, New Old Stock.  PAT.

0294. ALBERT LEA MCHY. CO. - ALBERT LEA, MINN (same markings both sides. - - 7.75" combination pivoting head tool with nipper and plier jaws (Note: Different marking variation without patent date). Patented by Ole Medhus of Faribault, Minn. on April 3, 1908. Excellent with plated finish. (S280)  PAT.

PiCs Lots 285 thru 294

0295. Unmarked - - Wrench set consisting of ten open end heads, two alligator type heads and one large and one small handle. All in a metal tray with missing lid. There are a few open slots for the wrench head in the tray so there may be some missing parts. Looks like the XceL Interchangeable Head Wrench Set patented by John Zilliox of Orchard Park, NY on April 28, 1925.  PAT.

0296. Set of four bearing scrapers marked "MOUND TOOL CO." (St. Louis, Mo.) and one unmarked valve tool? - - 7.5" to 10.5". Bearing scrapers are in Excellent condition. other tool is Good.

0297. INDIAN MOTOCYCLES - HENDEE MFG CO - SPRINGFIELD, MASS. USA - WAKEFIELD WRENCH WORCESTER, MASS / NO. 8 - PAT SEPT 4, 1900 - - 6.25". Indian Motorcycle wrench. Side adjust. with hollow handle. Wakefield wrench was patented by John E. Wakefield of Worcester, Mass. Good+ with a few minor dings. (S124)  PAT.

0298. Lot of Two: Bernard Type Pliers
(1.) W. SCHOLLHORN CO. - NEW HAVEN, CONN. - MADE IN USA / BERNARD'S PATENT PENDING - - 6" specialty pliers for attaching the tips to end of shoe laces. Good++.
(2.) PARAGON - W. SCHOLLHORN CO. - NEW HAVEN, CONN. / BERNARD'S PATENT MAR. 17, 1914 - - 7.25" shoe button pliers (without side nippers variation) with a spring to keep the jaws open. Patent were granted to William A. Bernard of New Haven, Conn. Good++  PAT.

0299. Marked only "3V-1" - - 5" small hand cranked valve grinder. Similar to one we have sold before marked "Harley Davidson". Good+, missing the crank handle that was attached to the end of the valve.

0300. Unmarked - - 10" cast plier like tool with three flexile bands. Advertised as "The Little Giant Fruit Jar Holder with Three Bands". Patented was granted to Benjamin F. Bain of Pittsburg, Penn. on Sept. 13, 1910 and assigned to the Wolverine Supply & Manufacturing Company also in Pittsburg. I have seen the handles before but this is the first one seen with the three bands. Good++.  PAT.

0301. Lot of Four: Bernard Type Parallel Jaw Pliers with Nippers. Will be sold choice pliers
(1.) BERNARD'S - MAY, 6, 1890 - JULY 19, 1892 / W. SCHOLLHORN CO. - NEW HAVEN, CONN. - - 6.5". Fair.  PAT. and  PAT.
(2.) DeVILBISS - PAT MAR. 1, 04 / DeVILBISS - DUNDEE, MICH. - - 6". Good+.  PAT.
(3.) BERNARD'S - MAY, 6, 1890 - JULY 19, 1892 - CUT NO TEMPERED STEEL / W. SCHOLLHORN CO. - NEW HAVEN, CONN. - - 6.5". Good++.  PAT. and  PAT.
(4.) DeVILBISS - PAT MAR. 1, 04 / DeVILBISS - DUNDEE, MICH. - - 7". Good  PAT.

0302. BERNARD - W. SCHOLLHORN CO. - NEW HAVEN, CONN. - PAT. 3-17-14 - PAT. 4-6-15 - MADE IN USA - - 7.25" shoe button pliers with side nippers with a spring to keep the jaws open. Patents were granted to William A. Bernard of New Haven, Conn. Excellent with plated finish.  PAT.

PiCs Lots 295 thru 302

0303. TURNTABLE 98 - MADE BY GOODELL CO. - ANTEIM, N.H. USA - PAT. MAY 24, 1898 - - 10.5" cast iron hand cranked apple peeler and corer. Excellent. (patent not found)

0304. E. C. SIMMONS KEENKUTTER - PAT. MAY 24, 1898 with a large KeenKutter logo on the gear mechanism - - 10.5" cast apple peeler and corer made by Goodell Co. for Simmons Hardware. Good++ except the end of the piece that kicks the apple off the spindle is broken off and missing. (patent not found)

0305. Unmarked - - 8.5" automatic grapple. Former owner's tag claims it's a salesman sample hay fork. Whatever it is, it's a neat one. Excellent, has been repainted.

0306. ROGERS & NELLIS, PITTSBURG, PA. / PATENTED MARCH 1, 1870 - - 17" early cast grapple or hook used to attach hay hoisting pulleys to the over head barn beams. Patent was issued to Seymour Rogers of Pittsburgh, Penn. Good+ with overall casting roughness or pitting.  PAT.

PiCs Lots 303 thru 306

Buggy and Wagon Wrenches, Whip Holders and Steps - Group One (lots 307 thru 367)

0307. BA190 (orphan) - - 9" cast buggy whip holder. Excellent with green paint.

0308. B993M / (IHC logo) - - 8" cast buggy whip holder. Only three shown on the IHC Owner's List. Good++.

0309. N79 (orphan) - - 9" cast buggy whip holder. Excellent with green paint.

0310. Unmarked - - 4.25" cast whip holder.

0311. A503 <M-H> (Massey-Harris) - - 7" cast buggy whip holder. Excellent.

0312. PARRY (Parry Mfg. Co. - Indianapolis, Ind.) - - 6.75" buggy whip holder and wrench combination. Excellent, no patina. (R1-372)

0313. Lot of Two: Unmarked buggy steps with diamond pattern foot plates. - - 12". One is Good++, one is pitted.

0314. FERGUSON'S PATENT SPEEDING CART (J. P. Ferguson - Ann Arbor, Mich.) - - 7" buggy step. Bottom part only, top part has broken off and is missing.

0315. BC101 / <M-H> (Massey-Harris) - - 6" cast buggy wrench holder. Excellent.

0316. H286 / (ledger plate logo) (IHC) - - 6.25" rare cast buggy whip holder. Only one owner's of this whip holder is listed on the IHC Owner's List and this variation with the ledger plate logo is not listed.. Good++.

PiCs Lots 307 thru 316

0317. DEERE / PAT APR 28 1903 - - 8.75" buggy wrench (1-1/8" square nut size). Patent for the Ideal type buggy wrenches was granted to Nathaniel Stone of Outlook, Washington. Fair, nut holder spring is missing, some surface damage. (D618, R1-134)  PAT

0318. IDEAL - 7321B (with Eberhard's "E" in circle logo) / PAT APR 28 1903 - "B" - - 8.5" (1" square nut size) buggy wrench with nut holder. The Ideal Buggy Wrenches were patented by Nathaniel Stone of Outlook, Washington and mfg. by Eberhard Mfg Co., Cleveland, Ohio. Good+. (R1-246)  PAT

0319. SECHLER - CINi?? (Cincinnati?) - - 9" buggy wrench. D. M Sechler made carriages in Cincinnati, Ohio from 1877 to 1887 before starting the D. M. Sechler Co. in Moline, Illinois (see R1-418). Good++ with weak markings. (not in Rathbone)

0320. IDEAL - ANCHOR BUGGY CO. (Anchor Buggy Co. of Cincinnati, Ohio) / PAT APR 28 1903 - - 8.5" buggy wrench with nut holder (1-1/8" square nut size). Good++. (R1-19)

0321. MILLER'S VEHICLE WRENCH / PATD JAN 27 91 - 1/2 - - 8.75" buggy wrench patented by John A. Miller of St. Louis, Missouri. Good++. (R1-327)  PAT

0322. ST LOUIS WRENCH CO - B / PAT JAN 27-91- - 8" buggy Wrench. Patented by John A. Miller of St. Louis, Missouri. Good+. (R1-434)  PAT

0323. "SCHACHT" (Schacht Mfg. Co. - Cincinnati, Ohio) - - 9" buggy type hub wrench. Rare wrench, first we have had to sell but severely pitted. (R1-415 ).

0324. Unmarked (orphan) - - 12" oddball buggy or wagon wrench. Good++. (not listed, no info found)

0325. Lot of Three: Unmarked Oddball / Orphans Buggy Type Wrenches - - 9" to 11".

0326. Lot of Three: Oddball / Orphan Buggy Wrenches
Top one in photo is marked with a "3", other two are not marked - - 9".

0327. MCCUE-HARTFORD / 2091 - - 9". Overall pitting or casting roughness. (R1-320)

0328. Unmarked- - 9" buggy type wrench with a nail claw on one end. Excellent. (listed in a1880 Belknap catalog)

0329. PAT'. APL'D FOR. (with a "ZB" logo, for patentees Henry Zook and James Byler?) / 1 - - 9" odd buggy wrench like the Susquehanna Fertilizer Co. (R1-447) and H. S. Zook (R1-503) wrenches. Patent granted May 2, 1883 to James K. Byler and Henry S. Zook, both from Morgantown, Penn. Good++, not cleaned. (R3-307)  PAT

PiCs Lots 317 thru 329

0330. GETMAN - PATD 86 - ILION (embossed on top of handle) - - 8" buggy wrench with nut holder (1-1/8" size). Patented by Henry Getman of Ilion, New York. Good++ (R3-92)  PAT

0331. H. W. GETMANS PATD 86 (embossed on bottom of handle)- - 7.45" buggy wrench with nut holder (1" size). Good++. (S228, R1-201)  PAT

0332. COOK - PATD SEPT 1, 85 / 1 - - 9" buggy wrench with a nut holder. 1" size. Patented by Roswell Cook of Ilion, NY. Excellent. (S240, R1-112)  PAT

0333. COOK - PATD SEPT 1, 85 / 1-1/2 - - 9" buggy wrench with a nut holder. 1-1/2" size. Pitted, nut holding lever spring is broken. (S240, R1-112)  PAT

0334. Lot of Two: Cook Buggy Wrenches
(1.) COOK - PATD SEPT 1, 85 / 1-1/4 - - 9" buggy wrench with a nut holder. 1-1/4" size. Excellent. (S240, R1-112)
(2.) COOK - PATD SEPT 1, 85 - - 8.5" buggy wrench with a nut holder. Note: No size markings on back side variation. Good+. (S240, R1-112)  PAT

0335. T G MANDT WRENCH 10 (star logo) - PAT JUNE 13 1896 (T. G. Mandt Mfg. Co. - Stoughton, Wis. - later Moline Plow Co.) - - 10." wagon hub wrench and hitch pin. Star logo variation. Applicable patent was issued to William John Leach of Brighton, Wisc. on Jun. 30, 1896. Good++. (S215, R1-307, C210)  PAT

0336. R & F - - 10.5" odd double jawed adjustable wrench. First one I have seen. (not listed, no info found)

0337. G. A. HOSMER & CO - BUFFALO NY (pitted, can't read all the markings) - - 8.5". Combination plier type buggy wrench with four open end wrenches. Canadian patent was issued to Giles Arnel Hosmer of Buffalo, NY on Nov. 06, 1894. Pitted. (S198)  PAT

0338. PEUGEOT FRERES (Peugeot Brothers) - S. G. D. G. BREVETE - TOUT ACIER FONDU - - 10.5" early turn handle to adjust coach wrench with octagon shaped wooden handle. Single jaw variation. Good++.

0339. Unmarked (Miller Falls Co of Miller Falls, Mass.) - - 8.25" adjustable buggy wrench with a metal spinner handle. Square head variation. Good+ with some light pitting. (S207, C221)

0340. PAT'D. NOV. 2, 80 - - 12" wood handled adjustable buggy wench. Single head variation. Patented by H. A. Thompson of Farmington, Maine. Good++. (S204)  PAT

0341. STUDEBAKER / 1-1/4 (Studebaker Bros - South Bend, Indiana) - - 10" buggy wrench. Scarce largest size. Good+. (R1-444)

0342. STUDEBAKER / 1-1/8 (Studebaker Bros - South Bend, Indiana) - - 7.75" buggy wrench. Good++. (R1-444)

0343. STUDEBAKER / 7/8 (Studebaker Bros - South Bend, Indiana) - - 8.5" buggy wrench. Good++. (R1-444)

0344. Studebaker type buggy wrench but marked with a "SB" logo / 1-1/8 (and a "M" in a square logo) - - 8.5". Good++.

0345. Lot of Two: Harper Buggy Wrenches
(1.) HARPER / PAT AP'D FOR (Harper Buggy Co. - Columbia City, Indiana) - - 8.5" buggy wrench with spring type nut holder (1-1/8" size). Pitted. (R1-218)
(2.) HARPER / PAT AP'D FOR (Harper Buggy Co. - Columbia City, Indiana) - - 8.5" buggy wrench with spring type nut holder (1-1/8" size). Spring is missing. (R1-218)

PiCs Lots 330 thru 345

0346. COLUMBUS BUGGY CO. - COLUMBUS O / PATENTED (with Dayton's "D" in a circle logo) - - 7.5" Dayton style buggy wrench. Excellent with bold high relief markings. (R1-110)

0347. FREEPORT (Moline Plow Co. - Moline, Illinois) - - 7.5" Buggy wrench. Markings on flat handle shaft and square center opening variation. Good++. (R1-184)

0348. FREEPORT (Moline Plow Co. - Moline, Illinois) - - 7.75" Buggy wrench. Markings on raised panel inside an indented panel and hex center opening variation. Good+. (R1-184)

0349. SPAULDING / D (Grinnell, Iowa) - - 8" buggy wrench. Rare, first one we have had to sell. Good with some jaw damage. (R1-268, R2-206)

0350. PRATT / 2813C (Wm. E. Pratt Mfg. Co., Chicago, Illinois) - - 7.5" Dayton style buggy wrench. Good++. (R1-384)

0351. FREEPORT (Moline Plow Co. - Moline, Illinois) - - 7.25" Buggy wrench. Markings in indented panel and hex center opening variation. Pitted. (R1-184)

0352. HENNEY (Henney Buggy Co, - Freeport, Illinois) - - 7.5" buggy wrench. Good with some light pitting. (R1-229)

0353. BANNER / 2813B PATENTED (Dayton's "D" in a circle logo) - - 7.25" Dayton style buggy wrench. Good with light pitting. (R1-42)

0354. LA PORTE / A - PATENTED (with Dayton's "D" in a circle logo) (La Porte Carriage Co. - La Porte , Ind.) - - 7.5" buggy wrench. Good+ with light pitting. (R1-290)

0355. SUSQUEHANNA FERTILIZER CO. / OF BALTIMORE CITY MD. - PAT MAY 2, 93 - ("Z" logo for Henry Zook?) - 7/8 - - 8.5" odd cast buggy wrench patented by James K. Byler and Henry S. Zook (both from Morgantown, Penn. Good++. (R1-447)  PAT

0356. Lot of Two: Buggy Wrenches
(1.) 7307C with an "E" in a circle logo (Eberhard Mfg. Co. - Cleveland, Ohio) / C - - 7.75". Fair, pitting, weak markings. (not in Rathbone, see R1- 156)
(2.) MOON BROS / C (Moon Buggy Co. - St. Louis, Missouri) - - 7.75". Pitted. (R1-337)

0357. DAYTON / 2814D - PATENTED (with Dayton's "D" in a circle logo) - - 8.5" unusual large Dayton buggy Wrench. Excellent. (similar to R3-61)

0358. Lot of Two: Buggy Wrenches
(1.) DAYTON / U 2812 - PATENTED (with Dayton's "D" in a circle logo - - 7.5" buggy wrench. Good++. (similar to R1- 127)
(2.) DAYTON / PATENTED (with Dayton's "D" in a circle logo - - 7.5" buggy wrench. Painted. (similar to R1- 127)

PiCs Lots 346 thru 358

0359. No markings (oddball / orphan) - - 12" oddball large buggy or wagon type wrench. Good+. (R1-504)

0360. No markings (orphan) - - 13.25" oddball wagon type wrench. Good, not cleaned. (not listed, no info found)

0361. No markings (orphan) - - 12" extra large buggy or wagon type wrench. Good++, painted. (not listed, no info found)

0362. No markings (orphan) - - 14" large wagon type wrench. Good++. (not listed, no info found)

0363. 7330K (with Eberhard's "E" in a circle logo) - - 14" impressive looking large wagon wrench. Good++. (not in Rathbone)

0364. Marked only "1-3/8" (orphan) - - 11" unusual buggy type wrench. Excellent. (not listed, no info found)

0365. Lot of Two: Wagon or Buggy Wrenches
(1.) 340 (orphan) - - 10" buggy or wagon wrench. Good++, painted.
(2.) 342 (orphan) - - 10.75" buggy or wagon wrench. Good+, not cleaned.

0366. Lot of Five: Unusual Buggy and Wagon Wrenches - - 8.25" to 12.5"

0367. Lot of Six: Unusual Buggy Wrenches
(1.) 58 (orphan) - - 9" buggy Wrench. Good++, not cleaned.
(2.) Marked only "1-1/8" - - 9" buggy wrench. Good++.
(3.) Weak markings, can't read - - 11.25" large buggy wrench. Good++.
(4.) 1019 (orphan) - - 9.25" odd buggy wrench. Good++.
(5.) 1905 - 1/8 (orphan) - - 9" buggy wrench. Good++.
(6.) 139 / 1 (orphan) - - 10" buggy wrench with decorative designs on end. Excellent.

PiCs Lots 359 thru 367

Garden Cultivator Type Wrenches (lots 368 thru 388)

0368. T. ROBINSON / T. ROBIINSON (Melbourne, Australia) - - 6" garden cultivator type. First one we have had to sell. Good+ with a small casting flaw or repair on one jaw. (R3-186)

0369. Iron King / L153 213 (C. W. Genung - Madison, Ohio) - - 6" garden cultivator type. Excellent. (R1-261)

0370. Famous Ohio / M625 (Ohio Cultivator Co. Bellevue, Ohio) - - 5.75". Excellent, like new with original green paint (R1-357)

0371. P61 (Verity Plow Co. - Brantford, Canada then Massey-Harris) - - 6.25" garden cultivator type with sectioned open shaft. Same part number as the Verity Cutout wrench. Good++. (R2-283)

0372. H & D (Hench & Dromgold - York, Penn.) - - 5.25". Good++. (R1-228)

0373. Marked only "F" (A. B. Farquhar Co. - York, Penn.) - - 6.5" garden cultivator type. Good+. (R1-178)

0374. SC NO. 11 (orphan) - - 6.75". Good+. (not listed, no info found)

0375. MINTERN - 3 / MELBOURNE - - 6" garden cultivator type. Pitted. (R1-330)

0376. M23 (orphan) - - 6.25" garden cultivator type. Good++. (not listed, no info found)

0377. J8 (Frost & Wood) - - 6" garden cultivator type wrench. Excellent. (R1-188}

0378. Lot of Two: Variations of the B14 Garden Cultivator type Wench
(1.) B14 (orphan) - - Six square cutouts on shaft variation. Good++.
(2.) B14 (orphan) - - Solid shaft variation. Good++.

0379. Lot of Two: Garden Cultivator Type Wrenches
(1.) 7365C (G. A. Kelly Mfg. Co. Longview, Texas and Wm. Pratt - Chicago, Illinois) - - 6" garden cultivator type. This wrench is seldom found with all the markings readable. Good+, all markings are readable. (R1-277, R1-385)
(2.) E607 (orphan) - - 6" with eight square cutouts. Good++.weak markings. (not listed, no info found)

0380. Lot of Two: Garden Cultivator Type Wrenches
(1.) STANDARD (Standard Garden Tool Co. - Montrose, Iowa) - - 6.5" garden cultivator type, side opening variant. Good+ (R1-435)
(2.) Marked only "3" - - 6" garden cultivator type. Good+. (not listed, no info found)

0381. Lot of Two: Garden Cultivator Type Wrenches
(1.) Marked only "9" (orphan) - 6". Good++.(Rathbone's Supplement lists a No. 9 wrench for the Grand Detour Plow co. but no illustration)
(2.) Marked only "10" (Empire Plow Company - Cleveland, Ohio) - 6". Good++. (R1-166)

0382. Lot of Two: Garden Cultivator Type Wrenches
(1.) 36 (Superior Drill Co. - Springfield, Ohio) - - 6". Good++. (R1-446)
(2.) X36 (orphan) - - 6". Good++. (not listed, no info found)

0383. Lot of Two: Garden cultivator type wrenches marked X59 (orphans). (not listed, no info found)

0384. Lot of Two: IHC Wrenches
(1.) R172 (IHC logo) - - Markings indented variation.
(2.) R172 (IHC logo) - - Markings raised variation.

0385. Lot of Three: Garden Cultivator Type Wrenches
(1.) Unmarked - - With seven square cutouts.
(2.) E607 (orphan) - - With eight square cutouts.
(3.) R172 (IHC logo) - - Markings indented variation. Pitted.

0386. Lot of Three: Planet Jr. No. 3 Wrenches (S. A. Allen & Co. - Philadelphia, Penn.). All different.
(1.) 3 - PLANET JR. / PLANET JR. - - 6.25". Excellent with original finish.
(2.) PLANET JR./ 3 - MADE IN THE UNITED STATES OF AMERICA - - 6.25" Excellent with original finish.
(3.) PLANET JR. / 3 - U.S.A. - - 6.5". Good++. Excellent.

0387. P & O (CUTOUT letters) / 1338 (Parlin & Orendorff later IHC) - - 6" CUTOUT (numbers on back side variation) garden cultivator type. Pitted. (R1-370)

0388. X32 (Whitman & Barnes) - - 5.75". Whitman & Barnes Garden Cultivator wrench. Good+. (R3-240)

PiCs Lots 368 thru 388

0389. MINNEAPOLIS-MOLINE - TRACTORS & FARM EQUIPMENT - BUILT TO DO THE WORK (with logo) / DEMAND GENUINE M-M PARTS (can't read all the markings) - - 7.5" oil can. Good+. Some of the paint and markings on the top part of the can are worn off.

0390. IHC - McCORMICK-DEERING FARM MACHINERY AND IMPLEMENTS logo / B. L. BONELL IMPT. CO. - McCORMICK-DEERING FARM OPERATING EQUIOPMENT - LOVELAND, COLORADO (IHC No. HL156) - - 7.25" oil can. Excellent, like new.

0391. MAYTAG - THE MAYTAG COMPANY - NEWTON, IOWA USA (with logo) / same markings on both sides - - 5" oil can. Excellent.

0392. FORD (script) - N - - 5.5" Ford tool kit oil can. Good+.

0393. FORD (script) / E - - 6.75" Ford tool kit oil can. Good+.

0394. "JOHN DEERE" (marked on top of lid) (Deere No. JD57) - - 7" oil can. Good+ with an old solder repair on side of can.

0395. GREAT WESTERN - ROCK ISLAND PLOW CO. - PAT. APRIL 14, 1908 - OTHER PATS. PENDING - - 5.25" oil can. Patent for the way the spout was fastened to the lid without using solder was granted to George J Richard of Waterbury, Conn, Excellent.  PAT

0396. Large IHC logo (IHC part No. B342) - - 15.5" metal tool box with wood bottom and oil can holder. Good+ with new red paint.

0397. Marked only "703" (on the bottom) and "704" (inside of lid) (Plano / IHC tool box No. 703) - - 12.25" heavy cast tool box. Good++ with new red paint.

0398. ACME, HA'R. CO. - T61 (Acme Hay Harvester Co. - Peoria, Illinois,) - - 16" heavy cast tool box with oil can holder. Excellent.

0399. KINGMAN NO. 4 CORN PLANTER - U258 - - 8" x 8.5" cast corn planter lid. Good++.

PiCs Lots 389 thru 399

0400. PAT SEPT 21 86 - 3 (markings indented on top side) - - 7.25" buggy wrench with nut holder inside the 1 inch box end. Patented by Henry Getman of Ilion, New York. Excellent. (R3-92)  PAT

0401. PICK-UP - PAT'D - - 8.25" sparkplug ratchet wrench and socket. You have to "pick up" the handle to ratchet and the wrench was patented on May 19, 1907 by George B. Pickop of New Britain, Conn. Mfg'd. by the New Britain Mfg. Co. of New Britain, Conn. and Crescent Mfg. Co. of New York, NY. Good++, not cleaned. (not listed)  PAT

0402. PAT'D AUG. 6, '78 (can't read all the markings because of pitting) - - 7".screw adjust malleable nut wrench with a hammer head. Patented by Henry Hill of Moline, Illinois. Rare small size but with severe pitting. (S958, C166)  PAT

0403. DH18 - HANDYBOY - DULUTH (with DIAMALLOY logo) - - 6." combination slip joint pliers and Crescent type wrench. Excellent, like new with plated finish.

0404. GRIPLOCK PLIER WRENCH - PAT'D 1-22-24 - OTHER PAT. PEND.- NORFOLK, NEBRASKA USA - - 8.5". Long nose version of the Griplock Plier Wrench. Patented by William Tull and Roy Bristol both of Stanton, Nebraska on Jan. 05, 1926. Date on wrench is not the correct patent issue date. Good+. (S261)  PAT.

0405. CC - PAT MAR 1, 1921 - OMAHA - - 8.25" dual adjust nut or pipe wrench. Patented by Gene D. Chenette of Ames, Iowa. Good+, some dings, repainted. (S463)  PAT

0406. Marked only: "11" (David Bradley) - - 8" malleable cast sliding wedge adjust alligator wrench, smooth jawed nut wrench version. Pat 1-6-1891 by Theodore Vandegrift of Shelbyville, Indiana and mfg. by the Vandegrift Mfg. Co. of Shelbyville, Indiana. Listed in David Bradley Parts Lists. Good++. (S546)  PAT

0407. HANDY 101 - NO 3 / I.C.I. - PAT PEND - - 9.5" malleable combination. tool with two pliers, screwdriver, wrenches, hammer, nail claw, ruler, etc. Good++. (S813)

0408. BOARDMAN WRENCH? CO. (weak markings, not all legible) - - 6" Boardman's combination nut and pipe wrench, hammer, nail claw, screwdriver, square socket and tool bit holder (in end of handle), Patents were issued on May 30, 1865 to A. W. Park of Norwich, Conn. and on Jul. 10, 1866 to Byron Boardman also of Norwich. Good with several dings. (S788)  PAT

0409. VISE GRIP - PAT'D- - 9.25". William Petersen's first model Vise Grip patented Oct. 24, 1921. Made without the locking lever, cast not stamped steel like later models. Good+ with a lip chip. (S262)  PAT.

0410. VISE-GRIP - DEWITT, NEB - PAT'D APR. 8, 24 - - 9" This is probably a transitional model between the Type Two Vise-Grips and the later models. The top half is like the Type Two's except it has a serrated insert for the upper jaw and a ring ferrule over the adjusting end. The locking lever is more like the later models than the Type Two's, the markings are on the locking lever rather than on the top and underneath the main pliers part like the Type Two's and the cast lower jaw is like the type Two's. First one we have had to list. Good++.  PAT.

0411. PAT SEPT 20, 1921 - HANDEHAND - TRADEMARK - MFD. BY H & E WRENCH CO. NEW BEDFORD, MASS.- - 10.25" helical screw quick adjust hex nut wrench. Patentees were Edwin J. Evans and George E. Hemphill both of Salt Lake City, Utah. Good+ with area of minor dings, adjustment isn't working. (S496).  PAT.

0412. ANY ANGLE WRENCH - PATENT 1916 - LIMA., O. USA / DROP FORGED STEEL - - 8.5" Crescent type adjustable wrench with an adjustable angle head. Mfg. by Atco Wrench Co. and patented by Ramson Bovee 11-21-1916. Good with some pitting. (S311)  PAT

0413. 8" UNIVERSAL. (etc.) / UNIVERSAL WRENCH CO. - DETROIT - WINDSOR - PATENTED 6-3-19 - 7-22-19 - - 8" Crescent type with a lever to release the adjusting jaw to allow for a ratcheting action. A United States patent was granted June 3, 1919 and a Canadian patent on July 22, 1919 to Roland John Statham of Vancouver, British Columbia Canada. Good+. (S530T)  PAT

0414. 4 - 6 DIAMOND CALK HORSESHOE CO with horseshoe logo / DAMALLOY logo and horseshoe logo - - 6" (4" and 6" heads).double ended Crescent type wrench in the scarce smallest size. Good+.

0415. 6 - 8 - DIAMOND CALK HORSESHOE CO with horseshoe logo / DAMALLOY logo - - 8" (6" and 8" heads).double ended Crescent type wrench. Good++ with plated finish.

0416. 8 - 10 IN / CRESCENT TOOL CO. - - 10" (8" and 10" heads).older style double ended Crescent wrench. Good with minor dings.

0417. 6 - 8 IN / MFD. BY THE CRESCENT TOOL CO. - - 8" (6" and 8" heads).older style double ended Crescent wrench. Excellent.

0418. 4 - 6 IN CRESCENT TOOL CO. - - 6" (4" and 6" heads).double ended older style Crescent wrench. Good+.

PiCs Lots 400 thru 418

Baxter's Double Ended Adjustable Wrenches (lots 419 thru 431)

An exceptional collection of wrenches patented by William Baxter of Newark, NJ including three different models and several different manufactures

0419. Unmarked - - 6" Baxter's "S" Model double ended wrench patented Dec. 01, 1868. Good++.  PAT.

0420. W. BAXTER - PAT. DEC 1, 1868 - - 6" Baxter's "S" Model double ended wrench. Good+ with owner's ID "M. C. NOEL" stamped several times.  PAT.

0421. W. BAXTER - PAT. DEC 1, 1868 / W. HAWKINS - DERBY, CT - - 6" Baxter's "S" Model double ended wrench. Minor pitting, zealously cleaned.  PAT.

0422. Unmarked - - 6.5" double ended wrench. Baxter's Improved Diagonal Wrench patented July 17, 1883 with the flat oval adjusting bolt head. Pitted.  PAT.

0423. PATENT FEB. 12, 56 (also marked with mfg. name but can't read all the letters) - - 9" double ended wrench. William Baxter's first model Diagonal Wrench with the round headed thumbscrew made according to Baxter's first wrench patent of Feb 12, 1856. Early pre Civil War adjustable wrench. Good+.  PAT

0424. Unmarked - - 8.5" double ended wrench. Baxter's Improved Diagonal Wrench patented July 17, 1883 with the flat oval adjusting bolt head. Good++.  PAT.

0425. Unmarked - - 8.5" double ended wrench. Baxter's Improved Diagonal Wrench patented July 17, 1883 with the flat oval adjusting bolt head. Good+.  PAT.

0426. Unmarked - -10" double ended wrench. William Baxter's first model Diagonal Wrench with the round headed thumbscrew made according to Baxter's first wrench patent of Feb 12, 1856. Early pre Civil War adjustable wrench. Pitted.  PAT

0427. Unmarked - - 10" double ended wrench. Baxter's Improved Diagonal Wrench patented July 17, 1883 with the flat oval adjusting bolt head. Good+.  PAT.

0428. E. C. STEARNS & CO. - SYRACUSE, NY USA - - 6" Baxter's "S" Model double ended wrench patented Dec. 01, 1868. Good+  PAT.

0429. Unmarked - - 8" Baxter's "S" Model double ended wrench patented Dec. 01, 1868. Good+.  PAT.

0430. E. C. STEARNS & CO. - SYRACUSE, NY USA - - 9.5" Baxter's "S" Model double ended wrench patented Dec. 01, 1868. Good+ with some dings and dents.  PAT.

0431. Unmarked - - 12" extra large Baxter's "S" Model double ended wrench patented Dec. 01, 1868. Good+, stuck won't adjust.  PAT.

PiCs Lots 419 thru 431

0432. Lot of Two: Automotive Tool Kit Wrenches
(1.) CADILLAC (script) - - 10" double opened ended forged wrench. Good+.
(2.) MAXWELL - 4 - - 9.5" double open ended flat steel wrench. Good+.

0433. INDIAN (in script) / INDIAN (in script) - - 7" adjustable automotive type wrench included in Indian Motocycle tool kits. Excellent. First example I have seen with the plated finish. (S125)

0434. W. SCHOLLHORN CO. NEW HAVEN, CONN.- - 6.25" slip joint pliers combination tool with two square wrench openings (one for automobile Prest-O-Lites), screwdriver, cotter key puller, etc. Pat. by Frank Knight of New Haven, Conn. on Nov. 5, 1910. Note: marking and mfg variation, also found marked with the patent date and also mfg. by Crescent Tool Co.. Good++.  PAT

0435. ZIM MFG. CO. -PAT. JULY 11, 25 - -7.5" cotter key puller pliers. Patented on Jul. 11, 1922 (not 1925 as marked on wrench) by Marion H. Harter of Minneapolis, Minn. Good++ with stamped owner's ID "GP".  PAT

0436. KKK - CURRIER-KOETH MFG CO - COUDERSPORT, PA. - - 8.5" plier tool with a nail claw and screwdriver on end of handles. usually found in a set with several interchangeable heads. Patents were granted on Jul. 02, 1901 and June 6, 1905 to Edward Koeth of Tipton and later Doerun, Missouri. Excellent. (S816, C112)  PAT. and  PAT.

0437. BILLINGS & SPENCER - HARTFORD, CONN. - 97 / PATENTED SEP 29, 1896 - - 4.25" Billings' Model 97 hollow sleeve type pocket or bike wrench. Patented by Charles E. Billings of Hartford, Conn. Scarce marking variation with the patent date on reverse side. Good++ with small chip on adjusting knurl. (S119, C69).  PAT.

0438. ARMSTRONG BROS TOOL CO. - CHICAGO USA - NO. 2 - - 4.5" Machinist and lathe screw jack. Good++.

0439. THE MATTHEWS WRENCH - DENVER, COLO. - - 9.5" Self adjust nut wrench with pivoting upper jaw. Patented by Edward Matthews of Denver, Colorado. Good+. (slightly different than S355)  PAT.

0440. "KANT SLIP" / A.D. WRENCH. & TOOL CO (Allan-Diffenbaugh Wrench & Tool Co.) - BARABOO, WIS - PATENTED APR. 27, 1920 - AUG. 2, 1921 - - 8" adjustable plier wrench, Patented by Allen C. Allan of Chicago, ILL. (later Baraboo, Wisc.). Good++. (not in Schulz)  PAT. and  PAT.

0441. HOE CORP.- POUGHKEEPSIE, NY - 10 / PATENTED FEB 21 - 1922 - 10 - - 11" self adjusting nut and pipe wrench with spring loaded jaws. Patented by Frederic Robert of Lynnbrook, Long Island, NY. Good++. (S361)  PAT

0442. SARVIE TOOL CO - ALEXANDRIA MINN - PAT RE23761 - - 8" odd locking pliers, marking variation of S287 Original patent issued to Walter Sarvie of Alexandria, Minn. on 1-30-1941. Good++. (like S287)  PAT

0443. DH18 - HANDYBOY - DULUTH (with DIAMALLOY logo) - - 7.75" combination slip joint pliers and Crescent type wrench. Excellent, like new with plated finish.

0444. Lot of Two: harness and shoe lasting pliers
(1.) USMC (United Shoe Machinery Co).- Q - MADE IN USA - - 8.75" with hammer and gripping claws. Good++.
(2.) Marked only "3" - - 8.75" with hammer and tack claw. Good+, light pitting.

0445. HAWKEYE WRENCH CO. MARSHALLTOWN, IOWA - - 6.5" slip joint pliers with screwdriver end. Rare pliers from the company that produced the Hawkeye alligator wrench. Good++.

0446. Lot of Three: Turn Handle Shaft to adjust Nut Wrenches
(1.) Unmarked - - 8" double headed. Pitting.
(2.) BLACKHAWK 151 - - 9" with four heads for both external and internal drain plugs. Good++.
(3.) BLACKHAWK 1 - - 9" with different handle grip than wrench above. Good++

PiCs Lots 432 thru 446

0447. OLIVER - RP207 / OLIVER - - 7.75". Good+. (R1-361)

0448. OLIVER RP208 / OLIVER - - 8.5". Good+. (R1-361)

0449. OLIVER / CP245 - - 9.25" Good+ with some light pitting. (R1-360)

0450. OLIVER RP209 / OLIVER - - 12". Good+, not cleaned. (R1-361)

0451. BASE WRENCH / EP49 (Oliver) - - 6.5". Good++ (R1-360)

0452. OLIVER RP210 / OLIVER - - 13.5" Good+. (R1-361)

0453. Black Hawk / SM167 (SD. M. Sechler Carriage & Imp. Co. - Moline, Illinois) - - 10.5". Considerably rarer than the look-a-like Sechler M57 wrench. Pitted. (R1-419)

0454. Lot of Two: Oliver / IHC Made in Canada Wrenches
(1.) G1 (Oliver / IHC Canada) - - 12". Smaller markings variation. Good+. (R1-361)
(2.) G.1 (Oliver / IHC Canada) - - 12.5" Good+. Larger markings, G.1 instead of G1, and longer than normally found. Variation not listed on the IHC List. Good+. (R1-361)

0455. 183 (Oliver) - - 12.5". With hammer variant. Good+ with light pitting. (R2-224)

0456. Lot of two: Oliver / Ohio Rake Wrenches
(1.) OHIO RAKE CO. - DAYTON O. / X - - 8". Good++. (R1-359)
(2.) Same wrench as above marked only with a "X" (Oliver and Ohio Rake) - - 8". Good++. (R1-361).

0457. 5089 (Avery Co, Peoria, ILL) - - 10" Tee socket without extra top center socket variant. Good with hammer damage on socket ends.

0458. AVERY / 464 (Avery Co. - Peoria, ILL) - - 6.75". Pitted. (R1-26)

0459. Avery / G4 (with a cross logo) (.B. F. Avery & Sons - Louisville, Kentucky).- - 7.75". Good++. (R1-27)

0460. Lot of Two: Avery and B. F. Avery Wrenches
(1.) B.F. AVERY & SONS G176 / LOUISVILLE KY USA - - 9" Good+, some pitting. (R1-27)
(2.) AVERY / 251 (Avery Co. - Peoria, ILL) - - 7.5". Pitted. (R1-26)

0461. B.F. AVERY AND SONS / J97 (with a horizontal "T" logo) - - 10", Good+ with some pitting. (R1-27)

0462. B.F. AVERY AND SONS CO C63 / LOUISVILLE KY USA - - 10" Good++. (R1-27)

PiCs Lots 447 thru 462

0463. B.F. AVERY AND SONS / CHILLED PLOW K209 - - 9.5" Good+, some pitting on one end. (R1-28)

0464. K80 (.B. F. Avery & Sons - Louisville, Kentucky) - - 5". Rare Avery wrench. Good++. (R3-14)

0465. 149M (Minneapolis Threshing Machine Co) - - 10" engine wrench. Good++. (R2-204)

0466. J. P. MANNY (John P. Manny Mower Co. of Rockford, ILL. later Emerson-Brantingham.) - -12". The John P. Manny Co. was founded in 1857. Good+, minor nicks, zealously cleaned. (R1-309)

0467. JOHN P. MANNY (John P. Manny Mower Co. of Rockford, ILL. later Emerson-Brantingham.) - - 12". Pitting under new paint. (R1-309)

0468. MOLINE PLOW CO / B169 (with a star logo and a "F") - - 14.25" Good+, some edge hammer damage. (R1-332)

0469. MOLINE PLOW CO. / HX34. - - 11". Good++. (R1-333)

0470. MOLINE PLOW CO / RD404 - - 11.75" Rare disc plow wrench with disk straitening slot. . Good++, minor edge damage. (R1-333)

0471. MOLINE DRILL / A763A - - 8.5". Good+, with light pitting or casting roughness. (R1-332)

0472. MOLINE DRILL / A1037 - MADE IN USA with Northern Malleable Iron Company's (St. Paul Minn.) "NR" in a circle logo - - 8.75". Excellent. (R1-332)

0473. MOLINE PLOW CO / WP241 - - 10.25" 3 openings on one end and one on the other variation. Good++, not cleaned. (R1-333)

0474. MONITOR DRILL / A270 (Monitor Drill Co. - Minneapolis, Minn., later Moline Plow Co.) - - 6.75". Excellent. (R1-334)

0475. MONITOR DRILL / A763A (Monitor Drill Co. - Minneapolis, Minn., later Moline Plow Co.) - - 8.5". Good++. (R1-334)

0476. Lot of Three: Moline Plow Co. wrenches marked with M.P. Co. logos. 7", 8.25" and 11". (R 1-332).

0477. Lot of Two: Moline Plow Co. Wrenches
(1.) MOLINE PLOW CO / H.X.5+ (with a "N" in a star logo) - - 10.5" square opening variant. Good++. (R1-333)
(2.) MOLINE PLOW CO / H.X.5+ - - 10.75" square opening variant. Good+ with some edge damage. (R1-333)

PiCs Lots 463 thru 477

0478. Z189 (Massey-Harris) / <M-H> - - 6.5". Good++, no patina. (R1-312)

0479. J7 <M-H> - - 6.5" doe Good+ with some pitting. (R1-312)

0480. P61 / <M-H> - M (Massey-Harris, originally Verity) - - 6.25". With hammer head. Same number as Verity cutout wrench. Seldom found with the <M-H> imprint. Good+, some light pitting. (R2-182)

0481. Lot of Four: Massey-Harris M443 Pitman Wrench Variations. All 5.5". (see R1-312). Will sell choice wrench.
(1.) M555 (with a dot in a circle logo) / <M-H> - - Good++.
(2.) M555 (with a dot in a circle logo and a diamond logo) / <M-H> - MADE IN U.S.A. (Massey-Harris) - - Good++.
(3.) M555 <M-H> (with a dot in a circle logo) - -Good++.
(4.) M555 - - No. patina.

0482. A23 / <M-H> (Massey-Harris) - - 5.5". Good+. (R2-180)

0483. P4973A / <M-H> (Massey Harris) - - 9.5". Only the second one we have had to sell. Good++. (R2-182)

0484. P337 <M-H> (Massey-Harris) - - 10.5" Good+. (R1-312)

0485. J727 <M-H> (Massey-Harris) - - 15". Pitted. (R1-312)

0486. JB192 <M-H> (Massey-Harris) / (diamond logo) - - 15". Good+ with some edge hammer damaged. (R1-312)

0487. Lot of Three: Massey-Harris Wrenches
(1.) Z-435 <M-H> - - 7.75" flat steel not cast variation. Good++, (R1-312)
(2.) <M-H> - - 9.25" flat steel. Good. (R1-312)
(3.) <M-H> - SPARK PLUG WRENCH 202783M1 / MADE IN CANADA - - 10.5". Good++. (R1-312)

0488. Lot of Two: Massey-Harris Wrenches
(1.) Z435 / <M-H> (raised dot) - - 8" cast with Massey-Harris logo on back variation. Good++. (variation not in Rathbone)
(2.) Z435 - <M-H> / (raised dot) - - 8" cast with Massey-Harris logo on front variation. Good++. (R1-312)

0489. Lot of Two: Massey Harris Wrenches
(1.) 122A - <M-H> - - - 6.5" Good with some pitting. (R1-311)
(2.) 2234 / <M-H> (with a dot in a circle logo) (Massey-Harris, earlier Case Plow Works) - - 7.5". Good++. (R1-311)

PiCs Lots 478 thru 489

0490. Lot of Five: Farm Implement Wrenches
(1.) P.942 / {+ logo and D logo)(originally Emerson, later Case T. M. Co.) - - 7.75". Polished (R1-162)
(2.) D421(Peoria Drill & Seeder Co. - Peoria, Illinois.) - - 8" with hammer poll. Polished. (R1-376)
(3.) J. I. CASE PLOW WORKS - 4106 / C - - 8" with a hammer poll. Good with pitting. (R1-77)
(4.) 4106 / C (Massey-Harris, originally Case Plow) - - 8" with a hammer poll. Good++. (R1-311)
(5.) J. I. CASE PLOW WORKS - 4105 / B - - 10.25". Good++.

0491. Lot of Six: Farm Implement Wrenches
(1.) P1 (orphan) - - 11". Pitted, (not listed, no info found).
(2.) HH (orphan, maybe Badger Mfg. Co. - Council bluffs, Iowa) - - 9.75". Good+.
(3.) S699 (Ohio Cultivator) - - 9.5". Pitted. (R1-357)
(4.) H90 (orphan) - - 7.5". H90 is also a Noxon cutout wrench number and also a longer different orphan wrench (see Lot CB111-1). Pitting, painted. (not listed, no info found)
(5.) D242 (Kingman Plow Co.) - - 12" Pitted. (R1-284)
(6.) SB (orphan) - - 8". Good++. (not listed, no info found)

0492. METROPOLITAN MATERIALS CO - BROOKLYN NY / GREENHOUSE MATERIALS.- - 7.5". Good++. (R2-200))

0493. HARRIMAN (Harriman Mfg. Co. - Harriman, Tenn.) - - 6.25". Some light pitting. (R1-219)

0494. FARQUHAR / YORK PA - - 7" with a small hammer poll. Good++ (R1-176)

0495. HURST MFG CO (Canton, Ohio) - - 6". Three opening variation. Good with some pitting. (R1-246)

0496. WM. J. OLIVER IMP. / CHILLED PLOW (Knoxville, Tenn.) - - 8". Good+. (R1-490)

0497. PRINETTI STUCCHI & CO. - - 6.25" cast. An internet search revealed that "Prinetti Stucchi was an Italian maker of sewing machines, bicycles and motorized vehicles, established in Milan in 1883." First one I have seen. Good++.

0498. No. 4 SAW (orphan) - -7.5". Excellent. (R3-218 with no info)

0499. OWATONNA MFG CO - OWATONNA MINN - - 8". Good++. (R1-365)

PiCs Lots 490 thru 499

0500. Unmarked - - 6" Wm Hjorth's Lightning combination plier wrench wire tool with a wire cutter, screwdriver, and tack puller. Patented by Arthur W. Hjorth of Jamestown, NY. on Sep. 8, 1903 Scarce small size. Good+. (like Smith No. 75, C168, not in Schulz)  PAT.

0501. HERBRAND No. 35-7 FREMONT, OHIO - MADE IN USA - - 7.5" angled nose pliers with three-position adjustable slide-joints. Good++.

0502. Jackson & Van Horn - Troy, O. - PAT. - Aug. 30, 1904 (weak markings, not all readable - - 7". Combination plier wrench tool with a wire cutter, screwdriver, and tack puller. Patented by William Van Horn of Piqua, Ohio. Good+ with light pitting. (C309, not in Smith's or Schulz.)

0503. PAT. DEC 15, 1896 - - 13" Lightning style combination plier wrench tool with a wire cutter and small nail claw. Patent was issued to John F. Tiner of Sutherland Springs, Texas. Known manufactures include Wm. Hjorth, America Co. and S. Sutton & Co. Good+ with some light pitting, stamped former owner's ID " W.E. T." (not in Smith's, Schulz's or Cope's)  PAT.

0504. WM. HJORTH JAMESTOWN N.Y. - PAT SEP. 8, 1903 (weak markings, not all readable) - - 12.5" Lightning combination plier wrench wire tool with a wire cutter, screwdriver, and tack puller. Patented by Arthur W. Hjorth of Jamestown, NY. Good+. (like Smith No. 75, C168, not in Schulz)  PAT.

0505. BLEDSOE - TRADEMARK (logo) MINNEAPOLIS / PAT. PENDING - - 10.5" plier wrench with coarse notched jaws. Patented 5-22-917 by Yancy Bledsoe, Bonham, TX. Excellent. (S257)  PAT

0506. EAGLE CLAW WRENCH CO. - CHICAGO USA.- PAT FEB 6, 12 - - 10" parrot head type adjustable plier wrench. Patented by Joseph A. Schlehr of Chicago, IL. Good+ with some dings.  PAT

0507. EAGLE CLAW WRENCH - M. T. CO. logo (Mechanics Tool Co.) - ROCKFORD, ILL. - PAT FEB 6 -12 - NO. 302 / DASCO (Damascus Steel Products Co., Rockford, Illinois ) - - 10". Parrot head style. Patented by Joseph A. Schlehr of Chicago, IL. Good+.  PAT.

0508. EAGLE CLAW WRENCH - PAT FEB 6, 12 - - 10.5". Parrot head style. Patented by Joseph A. Schlehr of Chicago, IL. Good+.  PAT.

0509. EAGLE CLAW WRENCH - PAT. OCT. 6, 1903 - - 7". Parrot head style marked with an earlier patent date than seen before. Patent was issued to Napoleon Grandchamp and Joseph A. Schlehr, both residing in Frazee, Minn. This is the earliest of three Eagle Claw Wrench patents. Good++.  PAT.

0510. EAGLE CLAW WRENCH - M. T. CO. logo (Mechanics Tool Co.) - ROCKFORD, ILL. - PAT FEB 6 - 12 - NO. 301 - - 7.5". Parrot head style. Patented by Joseph A. Schlehr of Chicago, IL. Good++.  PAT.

0511. "KANT SLIP" / A.D. WRENCH. & TOOL CO (Allan-Diffenbaugh Wrench & Tool Co.) - BARABOO, WIS - PATENT PENDING - - 8" adjustable plier wrench, Patented by Allen C. Allan of Chicago, ILL. (later Baraboo, Wisc.). on Apr. 27, 1920 -and Aug. 2, 1921. Good, overall light pitting. (not in Schulz)  PAT. and  PAT.

0512. G. M. S. - No. 48495 - - 7.5" What's It. A nice gismo with serrated jaws set with a set screw and a leather strap with a tee-handled adjustment. Strap wrench?

0513. MFD. BY SS / S MFD BY S - - 12.5" self adjusting wrench. Shop made? Good++.

0514. BEMIS & CALL - SPRINGFIELD, MASS / B & C logo - - 10.5" combination nut and pipe wrench with long adjusting sleeve (three rings) and wooden handle. Good++.

0515. BEMIS & CALL CO. - SPRINGFIELD, MASS (weak markings, not all readable) / A. D. BRIGGS PATENTED APR 26, 1859 - - 14" nut wrench with long (five ring) adjusting sleeve. Very early patented wrench. Good+ some light pitting, mushrooming.  PAT.

0516. BEMIS & CALL H. & T. .CO. - SPRINGFIELD, MASS - - 12.5" combination nut and pipe wrench with short hex adjusting nut and wooden handle. Good++.

PiCs Lots 500 thru 516

Hardware Company Tools - Winchester - Simmons Keen Kutter - Others - Plus Three Fencing Tools (Lots 517 thru 530)

0517. WINCHESTER - TRADEMARK - MADE IN USA - 1020 / PAT 3-14-22 - 6" - FORGED STEEL - - 6" wooden handled Stillson type pipe wrench. The 3-14-22 patent was issued to Guy C. Claypoole of Hamden, Conn. and assigned to the Winchester Repeating Arms Co. Scarce small size. Good++ with a few minor dings.  PAT.

0518. Lot of Two: Winchester Wooden Handles Screwdrivers With Brass Ferrules.
(1.) WINCHESTER - TRADEMARK - MADE IN USA - 7112 - 2 IN. - - 6.5" Good++.
(2.) WINCHESTER SPECIAL. - - 8.5". Good+ with a blade chip.

0519. WINCHESTER - TRADEMARK - No. 4016 - - 11" wooden handle socket chisel with 1/4" blade. Good++.

0520. WINCHESTER - TRADEMARK - No. 1002 - - 8" Coes style wooden handled monkey wrench with knife type wooden handle. Good+ with some dings, handle crack.

0521. WINCHESTER - TRADEMARK - No. 1003 - - 10" Coes style wooden handled monkey wrench with knife type wooden handle. Good+.

0522. WINCHESTER - TRADEMARK - MADE IN USA / 1023 - 14" FORGED STEEL - - 14.5" Stillson type pipe wrench with wooden handle. Fair, Some dings, light pitting, replaced wooden handle. jaw is not marked.

0523. OAK LEAF (with Logo) MADE IN USA - - 7" lineman's pliers. Oak Leaf was a Simmon's Hardware Co. brand. Good++.

0524. E. C. SIMMONS KEENKUTTER (with logo) - - 6.75" slip joint pliers with screwdriver end. Good+ with a few light dings.

0525. KEENKUTTER - - 6" diagonal pliers. Excellent.

0526. WINCHESTER TRADEMARK 2488 - 8 IN. - USA - - 8" slip joint pliers with angled jaws and screwdriver on end of handle. Good++ with plated finish.

0527. SIMMONS (Simmons Hardwar Co.) - - 6.25" slip joint pliers. Good+.

0528. STETLER / PAT'D JAN 2, 1900 - MAY 14 . 1901 - - 17.5" malleable fence stretcher and wire cutter. Patented by Daniel Stetler of Medford in Oklahoma Territory. Good+ with some dings. (Smith 127)  PAT.

0529. RED VIKING BOX 228 BLOOMFIELD, IND - PAT PEND. - - 11" combination fencing type tool with hatchet, hammer, plier wrench, screwdriver, etc. New paint, some dings. (Smith-1)

0530. Marked only "W1" (Kitselman) - - 9.5" combination fencing tool with hammer, staple puller and twisting jaws. End of one handle is broken off. (Smith-84)

PiCs Lots 517 thru 530

0531. BURGAN TOOLS logo - TRADEMARK - CHICAGO - PAT. APL'D FOR / JUNIOR COTTER PIN EXTRACTOR - - 7.5". A complicate gizmo to remove cotter keys, Excellent except it looks like the pivot bolt and nut are replacements.

0532. HANDE - TRADEMARK - PAT MAR 27, 1923, (with logo) (etc.) / H & E WRENCH CO. - NEW BEDFORD, MASS / - - 13" pipe wrench version of the Hande helix type quick adjust wrench. Patented by Edwin Evans and George Hemphill of Salt Lake City, Utah. Good++. (S496)  PAT

0533. "VICTOR" TRADEMARK - PAT. DEC 23, 1902. PAT. - PAT. AUG 25, 1903 - - 15" quick adjust pipe wrench made by the Bonner Mfg. Co. of Chrisman, ILL. and patented by Clarence E. Bonner, Cherrypoint, IL. Good++, not cleaned. (S653)  PAT

0534. Marked only "50" - - 19.25" Clyburn style Crescent type wrench with offset handle. Good+.

0535. Unmarked -- 28". One of the wildest shop made wrenches I have seen. Hinged upper jaw lifts up and can be adjusted by placing in one of several holes on the shaft. Lever loosens and tightens the jaws. Crude and pitted.

0536. No. 1 BULLARD WRENCH / PAT OCT. 27, '03 - - 9.5" self adjusting wrench mfg. by the Bullard Automatic Wrench Co. of Providence, Rhode Island. Patent issued to Frank Bullard of Los Angeles, Calf. on July 7,1903. Good with some hammer damaged. (like S659)  PAT

0537. No. 2 BULLARD WRENCH / PAT OCT. 27, '03 - - 12.5" self adjusting wrench like Lot 536 above. Good++.

0538. NEVER-STALL - MATHEWS DAYTON, OHIO /PATENTED - DROP FORGED STEEL - - 10.25" combination tool with adjustable wrench, pliers, screwdriver, nail claw, etc. Made at various times by Mathews, Forshee Mfg, and Thomas Mfg. Co. all of Dayton, Ohio. Excellent. (S818, C213, Smith-81)

0539. CRESCENT TOOL CO. - JAMESTOWN, NY / 10 IN - CRESTOLOGY STEEL - PAT. PEND. - - 10" Crescent adjustable wrench with a sliding adjusting knurl lock.Good++.

0540. 12 INCH - BESSEY - US PAT 2765690 (etc.) / NO. 111-4 - MADE IN W. GERMANY (etc.) - - 9.75" Crescent type with ratcheting action. Patent issued to Eugen Mayer of Stuttgart, Germany on Oct. 09, 1956. As found, not cleaned, rusty. (S770)  PAT

PiCs Lots 531 thru 540

Cut Out Type Wrenches (lots 541 thru 567)

0541. ZENITH (in cutout letters) - 490 (Unknown origin) - - 10". Same design as the Blount wrench (R1-58). RARE Cutout wrench. Condition: Substantial pitting under new black paint. (R1-502)

0542. LITCHFIELD (in CUTOUT letters) - M437 (Litchfield Mfg. Co., Waterloo, Iowa) - - 7" very rare number variation of the Litchfield cutout wrench, most are S437. Only second one we have had to sell and the other one had a broken jaw. Note: If you have difficulty remembering which is the rare part number, remember "M" = Money. Condition: New black paint but no apparent pitting, flaws or damage. (R1-299)

0543. LITCHFIELD - S437 (Litchfield Mfg. Co., Waterloo, Iowa) - - 7" CUTOUT. Severe pitting. (R1-299)

0544. BUFFALO PITTS (PITTS in CUTOUT letters) CO, NY - H - O - (also on the IHC Tool List) - - 10" CUTOUT with hammer poll. Some pitting under new black paint. (R1-68)

0545. CASADAY (in cutout letters) (South Bend Chilled Plow CO.) - - 11.75" CUTOUT. One of the most desirable, largest, and most impressive looking of all the cutout wrenches. At Al Schulz's first auction in October of 1996 several of the long time wrench collectors came close to cardiac arrest when his cutout Casaday became the first $1000 wrench, recent sales have been much higher. Condition: there is some pitting mostly on the small end. There is also a casting flaw that fills the second "A" in Casaday, most noticeable on the back side, natural dark patina. (R1-429)

0546. BRADLEY'S WONDER (in cutout letters) D99 (David Bradley Mfg, Bradley, ILL ) - - 14.75" with CUTOUT letters, two square boxes variant. Large, rare cutout with striking graphics. Always at the top of cutout wrench collector's wanted lists. According to my recollection the record high for this wrench at auction is $2,400. Condition: Good+ with some areas of light pitting some edge dings. nice natural patina. (R1-126)

0547. AMES (in cutout letters) (Ames Plow Co. - Boston, Mass. and Norfolk NY) - - 9" rare cutout wrench. Excellent condition, one of the best we have had to sell. (R1-18)

0548. IHC / 770E - - 10" with CUTOUT IHC logo A hubcap wrench for International Harvester's early high wheel autos and trucks. Rare and desirable IHC wrench that's guaranteed to be an original, not one of the phony recasts. Good++ with some of the original Japan finish. (R1-256)

0549. COMET (CUTOUT LETTERS) (Peter Hamilton Mfg. Co., Ontario, Canada) - - 6.75" CUTOUT with a small hammer poll. No part number variation. Good++. (R-111)

0550. COMET (CUTOUT LETTERS) -121C (Peter Hamilton Mfg. Co., Ontario, Canada) - - 6.75" CUTOUT with a small hammer poll. With part number variation. Good++. (R-111)

0551. A196 - DEERE (in cutout letters) - - 8" CUTOUT with part number running down along side of large square box end variant. Good+ with some pitting. (D162, R1-131)

0552. DEERE (in cutout letters) A196-A - - 8" CUTOUT with part number running up along side of large square box end variant. Excellent. (D162, R1-131)

0553. A196 - DEERE (in cutout letters) - U - - 8" CUTOUT . Part number above the small open end variant. Good+. (D157, R1-131)

0554. PLANET JR. / H4 (in cutout letters) - - 8" CUTOUT. Large, scarce Planet Jr. wrench with double hammers (same design as the Deere double hammer cutout). Excellent. (R1-380)

PiCs Lots 541 thru 554

0555. C9 - IRON AGE (in cutout letters) (A. B. Farquhar, York, PA and Bateman Mfg. Grenloch, NJ) - - 6.25" CUTOUT with small hammer head. Smaller square box end variant. Good+. (R!-260)

0556. Lot of Two: Planet Jr. Cutout Type Wrenches. (S. A. Allen & Co. - Philadelphia, Penn.). (R1-380)
(1.) PLANET JR. / 3 - - 6.5" with CUTOUT letters. Good+ with some light pitting.
(2.) PLANET JR. / 2 - - 6.5" with CUTOUT letters. Good++.

0557. BLACKHAWK (in CUTOUT letters) (Sechler / Oliver) - - 7.5" CUTOUT with hammer poll. No stud variant. Good++. (R2-36)

0558. BLACKHAWK (in CUTOUT letters) (Sechler / Oliver) - - 7.5" CUTOUT with hammer poll. With stud variant. Good++. (R2-36)

0559. Lot of Two: Universal Cutout Type Wrenches from the Ames Plow Co. - Worcester and Ayer, Mass
(1.) UNIVERSAL (in cutout letters) - - 5" CUTOUT. No part number variation. Good++. (R1-466)
(2.) UNIVERSAL (in cutout letters) - - 5" CUTOUT. Marked with part number variation. Good++. (R1-466)

0560. OXO (in cutout letters) - H90 (Noxon Brothers of Ingersol, Ontario, Canada) - - 8.5" CUTOUT. Same wrench as the Noxon H90 without the two N's. Wrench mounted on the tool box that has the N's. Good+ with some pitting. (R1-356)

0561. OXO (in cutout letters) (Noxon Brothers of Ingersol, Ontario, Canada) - - 8" CUTOUT. No number variation which is 1/2" shorter and a slightly different design than the marked H90 OXO wrench in Lot 560 above. Pitted. (R1-356)

0562. IRON AGE (in CUTOUT letters) - E39 (A. B. Farquhar, York, PA and Bateman Mfg. Grenloch, NJ) - - 8.75" CUTOUT with hammer head. Excellent.(R1-260)

0563. PLANET JR (in cutout letters). / K48 - - 5" CUTOUT. Smallest of the Planet Jr. cutouts. Pitting. (R380)

0564. GRANITE STATE (Hinsdale, New Hampshire) - - 5.25". Smallest of the CUTOUT wrenches and one of the smallest wrenches found with a hammer poll. Excellent. (R1-207)

0565. P & O (CUTOUT letters) / 1338 (Parlin & Orendorff later IHC) - - 6" CUTOUT (numbers on back side variation) garden cultivator type. Good++. (R1-370)

0566. ABF - York PA (in cutout letters) (A. B. Farquhar, York, Penn.) - - 6.75" CUTOUT with hammer head. Good+. (R1-176)

0567. VERITY (in CUTOUT letters) / P61 (Verity Plow Co/Massey-Harris) - - 6.25" CUTOUT. Good+ with some pitting. (R1-472)

PiCs Lots 555 thru 567

John Deere and Related Companies Wrenches, Etc. - (lots 568 thru 590)

0568. Lot of Two: Dain Z78 Variations
(1.) Dain (John Deere) / Z78 - - 6.5" pitman wrench. Good+ with a casting flaw on the back side. (D561)
(2.) Dain (John Deere) / Z78 - - 6.5" pitman wrench. Name upside down variant. Good++. (D562)

0569. DEERE & MANSUR CO / S51 - - 10.25" Wrench with screwdriver end. Severe pitting. (R1-139, D514)

0570. M14 (Deere / McGee Garden Cultivator) - - 9.5". Good++. (D421, R1-131)

0571. DEERE & CO / M123-A - - 11" with hammer head. Good+, edge dings. (D425, R1-131)

0572. DEERE & CO / M123 - - 11" with hammer head. Good++. (D424, R1-131)

0573. 246 (Marseilles Mfg. Co - Marseilles, ILL. / Deere) - - 5.5" by 12.5" tee wrench. Pitted. (D51, R1-310)

0574. CLUTCH / BP495 (Dain / Deere) - - 5.5" Extremely rare wrench that came with the Dain Hay Press. Nobody shows the BP495E in Dill's Deere Tool Owner's List, this earlier example without the "E" suffix isn't even listed. One of the highlights of the auction. Good+ with some pitting or casting roughness, couple of the markings were not cast real clear. (like D269)

0575. D34 - U (Deere) - - 8.75". Good+ with some pitting. (D277, R1-131)

0576. SYRACUSE / LH22 (Syracuse Chilled Plow / Deere) - - 9" with hammer head. Good+. (D420, R1-448)

0577. JOHN DEERE / 1340SC - 9" Good++. (D81, R1-130)

0578. Lot of Two: Deere Syracuse Chilled Plow Co. Wrenches
(1.) Z2 SYRACUSE (Syracuse Chilled Plow Co. / Deere) - - 10.5". Two hammer heads, small end up variation. Good. (D553)
(2.) Z2 SYRACUSE (Syracuse Chilled Plow Co. / Deere) - - 10.5". One hammer head, small end up variation. Jaw corner crack. (D552)

0579. JOHN DEERE (B353R) - -16" Flat shaft, six and twelve point box ends variant. Good++. (D248, R1-133)

PiCs Lots 568 thru 579

0580. DEERE HZ836 - - 7". Two round holes on double open end variation (one hole doesn't go completely thru). Good+. (D338, R1-131)

0581. 136 (Deere) / N - - 10.25". Round holes variant. Good++ (D20, R1-130)

0582. Unmarked (Deere) - - 9.5" like Deere 136 or Deere 157 with round holes. Excellent. (see D31 for one with square holes).

0583. 148 (Deere & Co) - - 9.5" Good++ (D25, R1-130)

0584. Lot of Two: Deere / Van Brunt Wrenches
(1.) VANBRUNT / (no markings on reverse) - - 7". No stud, 3/4" hex variant. Excellent. (D280)
(2.) VANBRUNT / D-380 with JD logo (Deere) - -7". With stud, no space between words. Excellent. (D282)

0585. Van Brunt / 1911 JD 1986 - - 7" iron variant (only two owner's shown in Dill's List). Like Van Brunt D380M wrench. Excellent.(D286, R469)

0586. DAIN / L136E - - 7.75" Number near long slot variant. Good+. (D411)

0587. S2608D - MOTOR WHEEL 05164 - 3/4 HEX - MADE IN USA (Deere No. A5278DU) - - 15.75". Used on the Deere No. 952 Wagon. Flat or straight variant. Excellent. (D-193, R1-132)

0588. Lot of Three: Lot of Three Deere No, 196 Wrench Variants. Sell Choice Wrench
(1.) Unmarked (Deere 196) - - 7". Triangular cutout on double opening end. Good++. (D46)
(2.) 196 (Deere) - - 7". Three long slots and two round hole variant. Good++. (D37)
(3.) 196 (Deere) - - 7,25". Two square holes variant. Good++. (D43).

0589. JOHN DEERE - TY3166 - USA - - 5" 1/2" drive socket extension. Excellent, like new with chrome plating.

0590. JOHN DEERE - TY2383 - USA - - 9.25" Vise-Grip type locking pliers. Good+.

PiCs Lots 580 thru 590

0591. Lot of Five: Maytag Gas Engine Flat Steel Wrenches (R1-317)
(1.) MAYTAG (script) (Maytag collector's No. 1) - - 5". Good with light pitting.
(2.) MAYTAG (script) (Maytag collector's No. 1) - - 5". Good++ with minor edge dings.
(3.) MAYTAG (script) (Maytag collector's No. 2) - - 5.5". Good++ with minor edge dings.
(4.) MAYTAG (script) (Maytag collector's No. 2) - - 5.5". Good++ with minor edge dings.
(5.) MAYTAG (script) (Maytag collector's No. 6) - - 5.25". Excellent.

0592. MAYTAG (script) (Maytag collector's No. 4) - - 5.25" flat steel. One of the rarer Maytag Gas Engine wrenches. Good++, minor edge dings. (R1-317)

0593. Lot of Four: Maytag Wrenches, Etc. Will be sold choice item.
(1.) MAYTAG - 14987 (script) (Maytag collector's No. 3) - - 5".steel Maytag Gas Engine Wrench. Excellent. (R1-317)
(2.) MAYTAG (block letters) - - 7" steel multi-wrench. Excellent. (similar but slightly different than one shown in R1-317)
(3.) Unmarked ((Maytag collector's No. 9) - - 5" flat steel. Some pitting. (R1-317)
(4.) MAYTAG (script) - - 15" cast iron wringer guard. Excellent.

0594. CHURCH BROS / CHURCH BROS.- ADRIAN MICH - 39 (with "H" in a diamond logo) - - 15" malleable combination fencing tool with an open ended wrench. Good+. (Smith 97)

0595. HANDY 101 - NO 3 / I.C.I. - PAT PEND - - 9.75" malleable combination. tool with two pliers, screwdriver, wrenches, hammer, nail claw, ruler, etc. Good++. (S813)

0596. C68334 - - 8.75" combination tool for US Browning .30 caliber machine guns. Tool includes wrenches, screwdriver, punches, etc. Excellent.

0597. Marked only with the wrench opening sizes - - 11" cast multi-opening wrench with eight different size openings. Good++.

0598. PAT. AUG. 24, 75 - - 5.5" malleable cast household combination tool. Patented by Frank R. Woodward's of Hill, NH. Patent was for a rotary paper cutter on the end but this do every thing tool has a hammer, cork screw, can opener, glass cutter, knife sharpener, etc. Good++ but the knife sharpener bar and cork screw are missing.  PAT.

0599. - C - MOSSBERG WRENCH CO. - ATTLEBORO, MASS. USA - Pat Nov 19 & Dec 31, 95" - - 5" center screw adjust bike or pocket wrench. Patents were granted to Frank Mossberg. Good++ with minor jaw edge dings, Excellent plated finish. (S103B)  PAT. and  PAT.

PiCs Lots 591 thru 599

0600. Unmarked, (as usually found but a few have been seen marked REED MFG. CO. - ERIE, PA USA - GUARANTEED) - - 5.5" turn handle to adjust nut wrench with bulbous handle, open frame variation. Good+, jaws slightly sprung, punched dots for owner's ID. (not listed)

0601. "GIRDER" NO. 91 - JOSEPH LUCAS LTD - BIRMINGAN / LUCAS (spoked wheel and torch logo) - - 5" center screw adjust wrench with exposed shaft. Good++.

0602. Unmarked - - 4" center screw adjust nut wrench with skeleton handle and brass adjusting nut. Advertised in 1897 by Peck, Stow & Wilcox as the "Star Bicycle Wrench". Excellent with plated finish (unusual to find this wrench with plating). (S104)

0603. Lot of Three: Crescent Type Four Inch Adjustable Wrenches
(1.) CRESCENT / CRESTOLOY ALLOY STEEL - - 4". Excellent, like new.
(2.) CRESCENT TOOL CO. / DROP FORGED - - 4" older style. Good+, one spot of pitting.
(3.) PROTO - LOS ANGLES / 704-S - - 4". Good+.

0604. Lot of Two: Hayden Bicycle or Pocket Wrenches. (JUNE 15, 80 patent was issued to Randolph Hayden of Middletown, Conn.)  PAT.
(1.) HAYDEN JUNE 15, 80 - - 4" marked with the correct patent date. Good+ with weak markings. (not in Schulz, C161)
(2.) HAYDEN JUNE 16, 80 - - 4" marked with incorrect patent dated. Threaded shaft is broken. (not in Schulz, C161)

0605. Lot of Three: Plumbing Wrenches
(1.) LEADER SPECIALTY Co / INDPL'S IND / PAT. 7-15-24 - - 6.75". Patented by Claud J. Mick OF Indianapolis, IN. Good++.  PAT.
(2.) RODDICK WRENCH - COSTA MESA, CALIF - PAT. PEND. - - 4". Good++.
(3.) Marked only with a "WB"? logo - - 7". Excellent.

0606. BERNARD'S - No. 102-8 - PAT. No. 1064956 - / W. SCHOLLHORN CO. - NEW HAVEN, CONN.- - 8" parallel jaw pliers and wire cutter. Excellent with plated finish.  PAT.

0607. Lot of Two: Turn Handle to Adjust Nut or Drain Plug Wrenches
(1.) XCEL SOCKET WRENCH MFD BY PARK METALWARE CO. ORCHARD PARK, NY - PAT. No. 1639831 - - 8" turn handle adjustable socket nut wrench with two sockets. Patent issued to John Zilliox of Orchard Park, NY on Aug. 23, 1927. Good++. (S69)  PAT
(2.) Can't read markings - - 8" turn handle adjustable socket nut wrench with two sockets like above. Good+.

0608. EIFEL-GEARED PLIERENCH - 8-1/2" - '49-6 (1949 date code) PAT. NOS. - 1181654 - 1862817 - MADE IN USA BY AMER. PLIERENCH CORP'N - CHICAGO, ILL, - - 8.75" Plierench with screwdriver on end of handle in a cloth pouch with two extra jaws. Good++.  PAT  and  PAT

0609. Marked only with Moore's "M" in a circle logo - - 16" cast shoe bunion stretcher. Excellent.

0610. Lot of Two: Gellman Quick Adjust Nut Wrenches  PAT
(1.) GELLMAN WRENCH CORP. - ROCK ISLAND, ILL - POLLY / 6 INCH - NO. - PATENTED APR. 17, 1923 - - 6". External spring variation. Good+ with drilled hang hole.
(2.) GELLMAN MFG. CO - ROCK ISLAND, ILL - POLLY / 12 INCH - NO. 121 - PATENTED APR. 17, 1923 - - 12". External spring variation. Good++.

0611. "VICTOR" TRADEMARK - PAT. DEC 23, 1902. PAT. - PAT. AUG 25, 1903 - - 11" quick adjust pipe wrench made by the Bonner Mfg. Co. of Chrisman, ILL. and patented by Clarence E. Bonner, Cherrypoint, IL. Good+ with hammer dings. (S653)  PAT

0612. Lot of Two: Wedge Type Quick adjust Nut Wrenches
(1.) Unmarked - - 12".Good+.
(2.) ROGERS PRINTZ & CO - WARREN, PA / TRADEMARK ARPECO - PATENTED JUNE 9, 1908 - APR. 26, 1910 - DROP STEEL FORGED - - 8". Patents were granted to John R. Long of Akron, Ohio. Also found marked Standard Wrench and Tool Co. Good++. (S549T)  PAT. and  PAT.

PiCs Lots 600 thru 612

0613. DH16 - HANDYBOY - DULUTH (with DIAMALLOY logo) - - 6.5" combination slip joint pliers and Crescent type wrench. Excellent, New Old Stock in original package.

0614. INDIAN MOTOCYCLES - HENDEE MFG CO - SPRINGFIELD, MASS. USA - WAKEFIELD WRENCH WORCESTER, MASS / NO. 8 - PAT SEPT 4, 1900 - - 6.25". Indian Motorcycle wrench. Side screw adjust. with hollow handle. Several dings over the "Indian" markings, top part of the upper jaw has been modified by removing about 1/8". (S124)  PAT.

0615. 4" - 6" DIAMOND CALK HORSESHOE CO / DAMALLOY logo - - 6" (4" and 6" heads).double ended Crescent type wrench. Scarce smallest size. Good++.

0616. DIAMALLOY - DULUTH - USA / U.S. - - 5.75" combination pliers with a 4" Crescent head and a screwdriver. Early example of Diamond's Handyboy pliers. made thinner with wider jaw ends and black finish. Made for the U. S. military? Good++. (S243)

0617. COLLISON-WRIGHT "S" WRENCH (weak markings not all readable) MF'D BY PARROT MFG. CO. FREMENT, NEB. - PAT'D DEC. 5, 1911 - - 9" adjustable locking pliers with release lever on top. Patented by John S. Collison and William A. Wright both of Ord, Nebraska. Good+ with some dings. (similar to S309)  PAT

0618. P & C (Peterson and Carlborg) - 1234 - MFG. USA - PAT. No. 2600512 - - 7.75" different groove joint pliers. Patented by Homer A. Mead of Turlock, Calif. I think there are four or five different manufactures of this pliers. Excellent with plated finish. (S234)  PAT

0619. Unmarked - - 11" early turn handle to adjust coach wrench with twin jaws and octagon shaped wooden handle. Good++.

0620. HEIMBACK PATENT - - 10" quick adjust nut wrench with lever and rack teeth. Patented 6-8-1915 by Alton Heimbach of Duluth. Good++, weak marking as usual. (S308)  PAT

0621. F. W. MACKE & CO QUICKSET - PAT'D APRIL 22 - 1919 / KOKOMO, IND - - 10.5" wood knife handled screw and quick adjust nut wrench. Patented by Joseph Nielander of Kokomo, Indiana. Good with grind marks, added bail on end of handle. (S511)  PAT

0622. TROJAN - TROJAN WRENCHES L. A. CAL. / US PAT NO 1968783 - - 11.5" quick adjust wrench with a lever that releases the rack teeth from the upper jaw assembly. Patented by John R. Long, of Los Angeles, CA. Good++. (S721)  PAT

0623. BEMIS & CALL CO. - SPRINGFIELD, MASS - PAT AUG 1866 (not all markings are readable) - - 15" pipe wrench with short hex adjusting nut. Amos Call's patent of 8-28-1866 applies. Early B & C wrench in Good+ condition with faint markings, handle crack. (similar to S838 but with hex adjusting nut instead of long sleeve)  PAT.

0624. Unmarked - - 7.25" cast malleable screw adjust nut wrench made with only three pieces. Mfg. by the Girard Wrench Mfg Co. or Girard, Penn. and patented. by C. H. Miller of Erie, Penn. on July11, 1892. Good+ with a couple jaw edge chips. (S392)  PAT

0625. LOCK LINE - ROSS MFG CO,. - S. F. - US PATENT 2,370,308 - - 8" cam action pliers with a wire cutter mfg. in San Francisco, Calif. and patented by Abraham Hanson, Monrovia, Calif. on Feb. 27, 1945. Excellent. (S267)  PAT.

0626. 4 - 6 FORGED / 4 -6 TOOL STEEL - - 6" (4" and 6" heads).double ended Crescent type wrench with no maker's name? Good++.

0627. Unmarked - - 6.5" plier like tool patented on JUNE 20, 1899 by William H. Edwards of Rockford, Illinois as an "Adjustable Nut Cracker" but the patent specifications note it could be used as a pipe wrench. Good++ with most of the nickel plating.  PAT

0628. CRONK (Cronk and Carrier - Elmira, NY) - - 6.5" sliding type adjustable alligator wrench with a large round hole on the opposite end. Usually seen with a hex wrench instead of the round hole on the end. Patent issued to William Cronk of Montour Falls, NY on Oct. 22, 1912. Excellent. (similar to S29)  PAT

PiCs Lots 613 thru 628

0629. POWERGRIP TOOL CO. - MOUNTAIN AIR, NEW MEXICO - PAT. PENDING. / DANIELS (stamped like an owner's ID but also the name of the patentee) - - 9.5" lever quick adjust with rack teeth. Only New Mexico made collectible wrench? Similar wrench also made in Shawnee, OK. NM. Patented by Charles D. Daniels of Mountainair, New Mexico on Oct. 31, 1944. Good++. (S709)  PAT

0630. MYERS COMBINATION WRENCH MILWAUKEE WIS - - 8.5" quick adjust rack nut wrench with a lever for final tightening. Patented by William M. Myers of St. Joseph, Missouri, February 14, 1922. Good++ with a few very minor dings. (S560)  PAT

0631. THE H. D. SMITH & CO.- 10 IN / PERFECT HANDLE PATENTED - - 10" "S" curved handle Crescent type wrench. Patents by William S. Thomson of Plantsville, Conn. on May 13, 1913 and Jan. 15, 1915 apply. Good. (S306)  PAT

0632. FAMOUS 8 IN 1 / STEGER SALES CORP SOLE DIST'B'RS TULSA OKLA - - 8" combination plier tool with hammer, nail claw, screwdriver, open end wrenches, etc. Patented as a "Wire Stretcher Tool" by James O. Smith of Mounds, Oklahoma on Dec. 17, 1929. Excellent. (S1095)  PAT

0633. Marked only "B" / "9"- - 9.5" malleable double headed adjustable nut wrench using wing nuts to set jaw openings. Like the Belmont and Buckeye wrenches but only marked with the "B". Probably made by the U. S. Manufacturing Co., Canton, Ohio, Excellent. (like S304)

0634. HELIX 8 IN PETERSON TOOL CO EL DORADO, KANSAS US PAT 3555939 - - 8.5" helix type quick adjust wrench. Patented by Kenneth Halls of Broomfield, Colorado and assigned to Eugene Peterson. These wrenches were mfg. in El Dorado and Towanda, Kansas. Excellent condition with plated finish. Adjustment still works!  PAT.

0635. PAT. 4-24-26 - AMER. AUTOM. DEV'S CO. - - 9" unusual automotive type wrench with wooden slab handles and a rotating jaw segment to convert between a nut or pipe wrench. April 24, 1926 is not a patent issue date and I can't find anything about the company. First example I have seen. Good++. (not listed, no info found)

0636. THE ANDERSON / PAT-6-23-14 - - 6.75" Crescent type with a locking adjustable angle head. Patented by Anton E. Anderson, Frank L. Bailey and William C. Cummings all of Okmulgee, OK. Mfg. by the Anderson-Bailey-Cummings Co. of Okmulgee, OK. Poor, pitted, (S311, C41)  PAT.

0637. 8-1/2" PLIERENCH - CHICAGO 40, ILL. FORGED - PAT'D - 1061 (date code) - - 9" newer version of the Plierench with vinyl handle covering. Good++.

0638. PADEN MFG. CO. - OMAHA, NEBR. - - 7.5" locking pliers with a quick adjust sliding lower jaw. Patented by Dale D. Paden, Omaha, Nebraska on Sept. 22, 1959. Not marked with the patent number variation. Good+. (S270)  PAT.

0639. 8" UNIVERSAL. (etc.) / UNIVERSAL WRENCH CO. - DETROIT - WINDSOR - PATENTED 6-3-19 - 7-22-19 - - 8" Crescent type with a lever to release the adjusting jaw to allow for a ratcheting action. A United States patent was granted June 3, 1919 and a Canadian patent on July 22, 1919 to Roland John Statham of Vancouver, British Columbia Canada. Good+. (S530T)  PAT

0640. 6 in - 8 in - DIAMOND TOOL AND HORSESHOE CO . - DULUTH, MINN. with horseshoe logo / 6 in - 8 in - DAMALLOY logo - - 8" double ended Crescent type wrench (6 and 8 inch). Excellent like new condition..

0641. THE LAVIGNE & SCOTT MFG CO - NEW HAVEN, CONN. - PAT. APPL'D FOR / (picture of a feather) WEIGHT - - 5.5" side adjust bike wrench. Patented Dec. 31, 1895 by Joseph Lavigne - New Haven, Conn. Good+ with some weak markings. (C200)  PAT.

0642. SHEFFIELD CA?? - THREE RIVERS, MICH. - - 5.5" bicycle or pocket wrench. All the markings on the first line are not readable but I think they should read Sheffield Car. Co.- They made railroad handcars and velocipedes, etc. First one we have listed. Good+. some weak markings. (not listed)

0643. WAKEFIELD WRENCH - NO. 3 - MADE IN WORCESTER, MASS USA - PATENTS PENDING IN USA AND FOREIGN COUNTRIES - - 5.5" side screw adjust bicycle wrench . Wakefield model I have not seen before. Good++.

0644. U. S. (in a diamond logo) / MADE IN U.S.A. (Peter Lowentraut Mfg. Co. of Newark, New Jersey) - - 5.25" bicycle or pocket wrench. Good++ with Excellent plated finish.

0645. Lot of Two: Small Adjustable Nut Wrenches
(1.) BONNEY / 6" - - 5.75" Crescent type adjustable nut wrench with open handle. Good++.
(2.) W & B (Whitman & Barnes) HERCULE logo - - 6" all metal monkey wrench with loop type handle. Good++ with weak markings.  PAT

0646. GIANT CYCLE - CORTLAND N.Y. - USA - - 6" bicycle wrench. First one we have had to list. Good+. (not listed, no info found)

0647. No. 74 (with two Mossberg logos) MADE IN USA - - 4.5" side screw adjust bicycle or pocket wrench with a hollow sleeve handle. Good++. (S870T)

0648. E. C. SIMMONS KEENKUTTER logo - TEMPERED - - 6.5" calipers. Excellent.

0649. THE P. A. GEIER CO. - CLEVELAND / PATENT APPLIED FOR - - 9" What's It with cast shaft and a hooked rod that swivels and rotates.

PiCs Lots 629 thru 649

0650. D138N (Chattanooga, David Bradley, IHC) - - 12.5" Good, pitting and a casting flaw. (R1-99)

0651. D138 (Chattanooga, David Bradley, IHC) - - 12.75" with disk straightening slot. Over all casting roughness, not cleaned. (R1-99)

0652. CHATTANOOGA PLOW CO / D124 (later IHC) - - 11.75" with disc straightener slot. Good+, some minor dings and surface roughness under new black paint. (R1-99)

0653. D137 (Chattanooga, David Bradley, IHC) - - 11" - - Good with weak markings. (R1-99)

0654. NEWELL SANDERS PLOW CO / A163 (also IHC) - - 8.5" with a hammer head. Good++ with a couple casting flaws. (R1-351)

0655. CP4003 - IHC logo (Chattanooga / IHC) - - 8.5" with hammer head. All markings indented variation. Good++. (R1-98)

0656. CHATTANOOGA CP4003 / (IHC logo) - - 8.5" with hammer head. All markings raised. Good++ with traces of original red finish. (R1-98)

0657. CHATTANOOGA 3 (later IHC) - - 9" with hammer head. Square hole variant. Good++. (R1-98)

0658. HATTANOOGA (sic) 5 - - 9.5" with missing "C", foundry casting error. Good+ overall surface roughness.(R1-98)

0659. CHATTANOOGA 5 (later IHC) - - 9.5". Good+, some pitting. (R1-98)

0660. CHATTANOOGA 5 (later IHC) - - 9.5". Markings upside down from others seen. Good++, not cleaned. (variation not on the IHC List or Rathbone)

0661. CHATTANOOGA PLOW CO / F66 (also IHC) - - 11.75". Ultra rare, neat looking wrench. First one we have had to sell, only three owner's shown on the IHC list. Good++. (R1-99)

0662. CHATTANOOGA PLOW CO - 4 (also IHC) - - 12". Good+, light pitting, not cleaned. (R1-98)

PiCs Lots 650 thru 662

0663. Lot of Two: P & O / IHC Emerson Style Wrenches
(1.) 5283 (IHC logo) / D - - 9.5" Good+. (R1-251)
(2.) 5283 / P & O CO. - - 10" Good+. (R1-370)

0664. M231 (IHC)- - 7.25" pitman wrench with socket variation. Good+.(R1-254)

0665. CP245 (Oliver and Canadian IHC) - - 9.25" Good++. (R1-360, R1-98)

0666. F354-C / IHC logo) - - 8". All markings indented, three square hole variant. Good++. Painted red. (R1-252)

0667. M141 / (IHC logo) - - 9". Number indented logo raised variation. Good++. (R1-254)

0668. M238 - IHC logo - - 14.5".large soe with number indented, logo raised. Good++. (R1-254)

0669. F239 - IHC logo - 11 HP (Oliver and Canadian IHC-Hamilton Plow) - - 9.5". Good+. (wrench with IHC logo not pictured in Rathbone)

0670. OP123 (Orphan) - - 8". . the "OP" prefix suggest an Osborne/IHC/Emerson wrench but no proof has been found. Good++ with original finish.

0671. Lot of Two: IHC Wrenches
(1.) G261 - (IHC logo) / MOWER - - 7.25" pitman wrench. Painted, some pitting.
(2.) P1599 - (IHC logo) - - 12.5" Markings on one side only, all markings raised variation. Good++.

0672. H272 (IHC, Aultman Miller Corn King Spreader, and Little Giant Fence Loom) - - 15" round hole with key and square box with four other openings on shaft variant. Good+, not cleaned. (R1-17)

0673. Lot of Two: IHC Wrenches
(1.) 940X (P & O CO / CANTON ILL (IHC) - - 5". Good++, original paint. (R1-370)
(2.) PG-58 (Milwaukee, later IHC) - - 5" doe, no bar variation. Excellent.

0674. Lot of Four: IHC Wrenches
(1.) P318 / IHC logo (IHC, earlier C B & Q Co.) - - 4.5". Good++. (R1-73)
(2.) DEERING / HAY RAKE (William Deering & Co. later IHC) - - 6.25". Good+, some pitting on one side. (R1-139)
(3.) P3156 - (a McCormick's "MC" logo and an IHC logo) - - 8.5". Variant with the two logos not on the IHC list. Good++ (R1-319).
(4.) Unmarked (No. 260 - McCormick / IHC / / Kentucky Drill / Hoosier Drill / American Seeding Machine) - - 7". Good++.

0675. C (Keystone Co, Sterling, Illinois, later IHC) - - 7.5". Good+. (R1-280)

PiCs Lots 663 thru 675

0676. Lot of Three: IHC Pitman Wrenches
(1.) M231 - - 6.75" open back, notched bar variation. Good++.
(2.) A1210 / (IHC logo) - - 7.5" Pitman wrench Good++/ (R1-96)
(3.) Z810 (IHC) - - 7". No logo variation. Good+, some light pitting.

0677. 1059B - (IHC logo) / (McCormick's "MC" logo) - - 8.5". Two logo variant not on the IHC List. Excellent.

0678. AMERICAN BOSCH MAGNETO CORP - MADE IN USA with a Bosch logo? (IHC No. 17601D) - - 3.5" ignition wrench with one gauge.

0679. T560 (Kentucky Drill, Hoosier Drill and IHC) - - 5" by 5.75" tee socket wrench with pry bar end. Good++. (R1-239, R1-255)

0680. Lot of Two: P & O / IHC Wrenches
(1.) P & O CO - CANTON ILL / 4129 (later IHC) - - 10.25". Good+. (R1-370)
(2.) P & O CO - 4130 / CANTON ILL (Parlin & Orendorff Co. - Canton, ILL. / IHC) - - 8.75". Some pitting. (R1-370)

0681. CHAMPION / R28 (later IHC) - - 9" with large slanting letters, Marked with name and number, no hang hole, no IHC logo variation. Good+. (R1-95)

0682. Lot of Two: IHC Adjustable Nut Wrenches.
(1.) Z786 - IHC logo - Z788 / (another IHC logo) - - 8.5" all metal screw adjust nut wrench. Hex adjusting nut variation. Good+. (R1-256)
(2.) DEERING / PAT SEP 7 97 - - 8.5" all metal Vandegrift monkey wrench. Poor, mushrooming, piece broken off lower jaw assembly. (R1-139)

0683. INTERNATIONAL HARVESTER CO / PAT SEP 7 97 - - 8.75" Vandegrift all metal monkey wrench. Small letters variation. Good. (R1-256)

0684. MCCORMICK / PAT SEP 7 97 (IHC) - - 9" Vandegrift all metal monkey wrench. Good+ with some hammer mushrooming. (R1-320)

0685. THE MILWAUKEE (Milwaukee Harvester Co. later IHC) - - 8.5" wood handled monkey wrench. Fair with grind marks on jaw edges, some pitting, handle dings, crack. (R1-328)

0686. U.S. SEPARATOR - - 5" bicycle or pocket style wrench for the United States Cream Separator made by the Vermont Farm Machine Co. of Bellows Falls, Vermont. Good++ with plated finish. (R465)

0687. THE MILWAUKEE (Milwaukee Harvester Co. later IHC) - - 8" wood handled monkey wrench. Fair with hammer damage, wood handle is Good++. (R1-328)

0688. MCCORMICK (with Whitman & Barnes' "W&B CO" logo) - - 10" Wood handle monkey wrench Good with hammer dings, handle crack. (marking variation not pictured in Rathbone)

0689. PAT'D JUNE 76 (IHC No. M88) - - 10.25". McCormick's patent screw adjust malleable nut wrench with hammer face. Patent was granted to Robert Hall McCormick and William R. Baker both of Chicago, Illinois on Jul. 27, 1875 and reissued on Jun. 13, 1876. Good with some pitting. (S963, marking variation not in Rathbone)  PAT

0690. <M-H> (Massey-Harris) - - 8.25" Vandegrift all metal monkey wrench. Good+ with some hammer damage. (R1-312)

0691. JOHN DEERE - - 10" wood handled monkey wrench. Good, with mushroomed jaws, poor handle. (D598)

PiCs Lots 676 thru 691

0692. SANDERS / A416 (Newell Sanders Plow Co. - Chattanooga, TN - later IHC) - - 13". Good+. (R1-411)

0693. Lot of Six: Drop forged Wrenches Marked CHAMPION - - 6" to 10.25".

0694. NO. 370 - 5/8 - 1/2 (orphan) - - 14.5" doe-s. Good++, painted.

0695. 1988 (orphan) (with a "CH" logo - - 15.5" Heavy cast wrench Good++, not cleaned.

0696. No. 3 - 5/8 - 3/4 / X - 5/8 - 3/4 (orphan) - - 16" doe-s wrench. Good+.

0697. No. 4 - 3/8 - 1/2 (with a "CH" logo / 3/8 - 1/2 (orphan) - - 12" doe-s wrench. Good+.

0698. No. 2 - 7/8 - 1 / X - 7/8 - 1 (orphan) - - 22" doe-s wrench. Good++.

PiCs Lots 692 thru 698

Buggy and Wagon Wrenches and Jacks - Group Two (lots 699 thru 734)

0699. SHELDON AXLE CO / 160 (Sheldon Axle Co., Wilkes-Barre, Penn.) - - 10.75" buggy wrench. Good++. (R2-264)

0700. SHELDON AXLE CO / 211 (Sheldon Axle Co., Wilkes-Barre, Penn.) - - 9.75" buggy wrench. Good++. (R2-264)

0701. SHELDON AXLE CO / 209 (Sheldon Axle Co., Wilkes-Barre, Penn.) - - 10.75" buggy wrench. Good++. (R2-264)

0702. SHELDON AXLE CO / 87 (Sheldon Axle Co., Wilkes-Barre, Penn.) - - 10.75". buggy wrench. Pitting. (R2-264)

0703. SHELDON AXLE CO / 88 (Sheldon Axle Co., Wilkes-Barre, Penn.) - - 11" buggy wrench. Good++. (R2-264)

0704. SHELDON AXLE CO / 154 (Sheldon Axle Co., Wilkes-Barre, Penn.) - - 9.5" buggy wrench. Good+ with slight bend. (R2-264)

0705. SHELDON AXLE CO / 151X (Sheldon Axle Co., Wilkes-Barre, Penn.) - - 8.5" buggy wrench. Good++. (R1-423)

0706. SHELDON AXLE CO / 157 (Sheldon Axle Co., Wilkes-Barre, Penn.) - - 10.25" buggy wrench. Good ++ (R2-264)

0707. SHELDON AXLE CO / 151 (Sheldon Axle Co., Wilkes-Barre, Penn.) - - 9.25" buggy wrench. Good++, polished. (R2-264).

0708. SHELDON AXLE CO / 77 (Sheldon Axle Co., Wilkes-Barre, Penn.) - - 9.75" buggy wrench. Good++, no patina. (R1-423)

0709. SHELDON AXLE CO / 76 (Sheldon Axle Co., Wilkes-Barre, Penn.) - - 9" buggy wrench. Good++. (R2-264)

0710. SHELDON AXLE CO / 99 (Sheldon Axle Co., Wilkes-Barre, Penn.) - - 10.25" buggy wrench. Good+, no patina. (R2-264).

0711. SHELDON AXLE CO / 80 (Sheldon Axle Co., Wilkes-Barre, Penn.) - - 11" buggy wrench. Good++, painted. (R1-423)

0712. SHELDON AXLE CO / 79 (Sheldon Axle Co., Wilkes-Barre, Penn.) - - 10.25" buggy wrench. Good+ with some pitting, not cleaned. (R1-423)

0713. SHELDON AXLE CO / 78 (Sheldon Axle Co., Wilkes-Barre, Penn.) - - 10.25" buggy wrench. Excellent. (R2-264)

PiCs Lots 699 thru 713

0714. SECHLER - MOLINE / 1 INCH (D. M. Sechler Carriage & Imp. Co. - Moline, ILL.) - - 8" buggy wrench. Solid version (also found with cut out letters). Good++, painted. (R1-419)

0715. HARTFORD SPRING & AXLE CO (Dunkirk, NY) - - 9" buggy wrench. Good with pitting. (R1-224)

0716. KINGSTON VEHICLE CO - N11 - - 9" Rare buggy wrench. Good+, minor pitting, painted. (R2-157)

0717. H. H. BABCOCK CO.- 29 (H. H. is very faint) (Watertown, NY) - - 9.25" buggy wrench. Good++. (R1-36)

0718. DALZELL & CO. - 12 (South Egremount, Mass.) - - 9" buggy wrench. Excellent. (R1-123)

0719. DALZELL & CO. - 13 (South Egremount, Mass.) - - 9" Buggy wrench. Excellent. (R-123)

0720. DALZELL & CO. - 14 (South Egremount, Mass.) - - 10" Buggy wrench. Excellent. (R-123)

0721. CLEVELAND AXLE MFG CO / CANTON O USA 1-1/8 DN - - 10.5" Good++. (R2-57)

0722. GANANOQUE CARRIAGE CO / Q74 (Gananoque, Ontario, Canada) - - 9" Buggy wrench. Name was used only from 1871 to 1891. Good++, no patina. (R1-198)

0723. ANCHOR BRAND - - 9" Buggy wrench. Anchor vehicles were sold by and later became part of Parlin & Orendorff which became part of the International Harvester Co. Good++. (R2-13)

0724. O. R. CO - DAYTON O. - E22 - - 9.25" buggy wrench. Good++ with slight bend. (R1-356)

0725. STAVER (STAVER Carriage Co. - Chicago, ILL.) - - 9.5" buggy wrench. Good++. (R1-438)

0726. IDEAL / PAT APR 28 1903 - B - - 8.5" (1" square nut size) Buggy wrench with nut holder. The Ideal buggy wrenches were patented by Nathaniel Stone of Outlook, Washington and mfg. by Eberhard Mfg Co., Cleveland, Ohio. Good+ with light pitting. (R1-246)  PAT

0727. H. A. MUCKLE ST PAUL / 310 - - 8" Buggy wrench. Poor, pitted, minor jaw corner crack, not cleaned. (R1-343)

0728. ST LOUIS WRENCH CO - A / PAT JAN 27-91- - 7.5" buggy Wrench. Patented by John A. Miller of St. Louis, Missouri. Good++. (R1-434)  PAT

0729. MILLER'S VEHICLE WRENCH / PATD JAN 27 91 - 1" - - 8.75" buggy wrench patented by John A. Miller of St. Louis, Missouri. Good+, weak markings as usual. (R1-327)  PAT

0730. PORTER PAT AXLE (Buchanan Co, Dowagiac, Michigan) / 76 - - 9" buggy wrench. Good++. (R1-383)

0731. H. H. BABCOCK CO.- 28 (Watertown, NY) - - 9.5" buggy wrench. Good++ with an area with pitting on back side. (R1-36)

0732. Lot of Three: H. A. Moyer (Syracuse, New York) Buggy Wrenches
(1.) Moyer / 225 - 7.5" Buggy Wrench (R1-342)
(2.) MOYER / 224 - - 8". Buggy wrench. Good++. (R1-342)
(3.) H. A. MOYER - - 9" Buggy wrench. Pitting, not cleaned. (R1-342, R2-210)

PiCs Lots 714 thru 732

0733. EUREKA - THE ASHLAND MFG. CO. - 1TSG - 2TSG / ASHLAND, O.- 5TSG (Ashland, Ohio) - - 18" cast buggy or wagon jack. Good++.

0734. STUDEBAKER (in script) - PAT'D - PAT PEN'D / THE BUCKEYE JACK MFG. CO - ALLIANCE, O (Alliance, Ohio) - - 11.25" cast jack. Good+, spring missing?

PiCs Lots 733 and 734

0735. Lot of Six: Buggy Type Wrenches
(1.) 4025A DAYTON - - 8.5" Good++
(2.) DAYTON / 1 - - 6.5". Painted.
(3.) 402?? DAYTON - - 7.75" Good++, last two digits of part number are not readable.
(4.) F103 / ("W" in a circle logo) (orphan) - - 6". Good++.
(5.) F104 (orphan) - - 8". Good++.
(6.) 3320C / ("S" in an oval logo) (orphan) - - 8.5". Good++.

0736. Lot of Six: Buggy Type Wrenches
(1.) G M & S CO NY / EAGLE (Orphan)- - 8.5". Good++. (not listed, no info found)
(2.) 554 (orphan) - - 8.5". Good++.
(3.) 7325C (with Eberhard's "E" in a circle logo) - - 8.25". Good++, painted.
(4.) 7324B - - 9" with hex opening. Good++.
(5.) 7324C - - 9.25" with hex opening. Good++.
(6.) 1036A with a "M" in a shield logo (Pennsylvania Lawn Mower Co.) - - 6.25". (R1-375)

0737. Lot of Six: Buggy Type but Probably Spark Plug Wrenches
(1.) C F & CO / QUALITY (orphan)- - 8.5" Good++. (not listed, no info found)
(2.) CRESCENT MFG. CO. - - 8" Good++.
(3.) 9-Z or Z-6? (with a "X" logo) (orphan) - - 8.25". Good+, not cleaned.
(4.) 9-Z or Z-6? (with a "X" logo) (orphan) - - 8.25". Pitted, painted.
(5.) CTK MFG CO (Chicago Tool Kit Mfg. Co.) / SP60 - - 8.25". Excellent. (see R2-106)
(6.) CTK MFG CO (Chicago Tool Kit Mfg. Co.) / SP60 - - 8.". Good++, poor casting on some markings. (see R2-106)

PiCs Lots 735 thru 737

Silo and Silo Type Wrenches - Group Two (Lots 738 - 754)

0738. OTTERVILLE MFG CO - 5/8 and 1/2 / S12 - 3/4 (Ontario, Canada) - - 10" silo wrench. Good++, painted. (R1-364)

0739. TWIN CITY TANK & SILO CO - 5/8 / MINNEAPOLIS MINN - 1/2 - - 10" silo wrench. Small letters variant. Good with pitting. (R1-461)

0740. MONTGOMERY WARD & CO 5/8 / 1/2 - - 10" silo wrench. Painted. (R1-336)

0741. SEARS ROEBUCK & CO - 5/8" / 1/2 - 10" silo wrench. Good++. (R1-418)

0742. THE MCCLURE CO / SAGINAW SILO - - 8.5" Scarce Silo wrench. Good++ (R1-318)

0743. SAGINAW SILO / FARMERS HANDY WAGON CO (Saginaw, Mich.) - - 8.5". Good++.(R1-175)

0744. CHAMPION SILO / WESTERN SILO CO - DES MOINES IOWA - - 12". Single socket variation. Good++. (R1-484)

0745. CHAMPION SILO (with a "CH" logo") / WESTERN SILO CO - DES MOINES IOWA - - 12" silo wrench. Single socket variation. Good++. (R1-484)

0746. E.C. TECKTONIUS MFG CO - 5/8 / RACINE WIS - 5/8 - No. 2 - -10.5" silo wrench. Marking variation. Good++. (R1-453)

0747. E.C. TECKTONIUS MFG CO - 5/8 - 1/2 / RACINE WIS - 3/4 - No. 1 - -10.5" silo wrench, marking variation. Good+. (R1-453)

0748. E.C. TECKTONIUS MFG CO - 5/8 - 1/2 / RACINE WIS - 3/4 - S12 - -10.5" silo wrench, marking variation. Excellent. (R1-453)

0749. Lot of Two: SAGINAW SILO - PATENT NO. 947334 - JAN 25, 1910 - - 11" cast silo door levers (also marked "R" and "L" for right and left sides). Patent was granted to William A Holnagel of SAGINAW, MICHIGAN. Excellent.  PAT

0750. DEMUTH STEEL PRODUCTS CO. CHICAGO - - 14" (larger variant) cast ratchet silo wrench with 1" female hex drive. Patent was issued to Gordon K. Wright of Hinsdale, Illinois on Mar. 10, 1914. Note: There are several other manufactures names found on this wrench. Good++. (R2-78)  PAT

0751. LOUISVILLE SILO & TANK CO / PATENTED MARCH 10 1914 - - 10.75" silo ratchet with 1-1/16" female hex drive. Markings on two lines variation. Good+, loop handle end is slightly bent. (R3-136)

0752. Lot of Three: Silo Type Ratchet Wrenches
(1.) CHICAGO MFG. & DISTRIBUTING CO. - CHICAGO / PATENTED MARCH 10, 1914 and a CH logo) - - 10.5" 1-1/16" female hex drive cast ratchet with a 5/8" hex socket. Good++ with new black paint.  PAT
(2.) CHICAGO - PO ORNEY (Pokorney?) MFG. CO / PAT. MARCH 1O, 1914 - - 10.5" 1-1/16" female hex drive cast ratchet. Excellent (not listed)
(3.) Unmarked - - 10.5" 1-1/16" female hex drive cast ratchet. Pitted, over cleaned.

0753. Lot of Four: Indiana Silo Company Wrenches. Will be sold choice wrench.
(1.) INDIANA SILO CO - 5/8 - - 10.75". Pitted. (marking variation not in Rathbone)
(2.) INDIANA SILO CO / 5/8 - - 11.25". Good++. (R1-249)
(3.) INDIANA SILO CO - ANDERSON, IND / INDIANA SILO CO - ANDERSON, IND - - 12". Good++ but a couple letters have casting flaws. (R1-249)
(4.) INDIANA SILO CO - 5/8 / DRO FORGED - - 10.5" single open end. Good+ with some light pitting. (R1-249)

0754. Lot of Four: Silo Wrenches
(1.) Marked only "S" and "9" (orphan) - - 8". Good with pitting.
(2.) 388T - 5/8 (orphan) - -10.5". Good++.
(3.) S12 - 3/4 / 5/8 - 1/2 (with a E.C. Tecktonius Mfg Co. logo) - - 10.5". Good+, light pitting. (R1-453)
(4.) S13 - 5/8 / 5/8 - 1/2 (with a E.C. Tecktonius Mfg Co. logo) - - 10.5". Good+. (not in Rathbone)

PiCs Lots 738 thru 754

0755. PP CO - P235 / PARIS CAN (Paris Plow Co - Paris, Ontario, Canada, also on the IHC list ) - - 9.75". Rare wrench only one owner shown on the IHC Owner's List. Excellent. (R1-268)

0756. CC PLOW CO / ELMIRA NY - - 8.5". Excellent. (R1-73)

0757. CHICOPEE C24 (Chicopee Falls, Mass.) - - 10,25" with two hammer heads. Good++. (R1-101)

0758. THE INSURANCE / KK.1753 - - 7". May be an E. C. Simmons (KeenKutter) product. Excellent, green paint. (R1-426)

0759. TIGER S. D. (J. S. Rowell, Beaver Dam. Wisc.) - - 8.5". Pitting under new paint. (R1-441)

0760. HARDER / X60 (Harder Mfg. Co. - Cobleskill, NY) - - 9.25". Excellent. (R1-216)

0761. STERLING MF'G. CO. - D127 / STERLING ILL. - - 12" Graphic lettering. Painted, some pitting. (R1-439)

0762. DD198 (American Harrow Co. Detroit, Mich.) - - 14.5". Large hex opening variation. Good+ but has a jaw crack. (R1-14)

0763. DREDNAUT / ST JOSEPH, MICH. - - 6" Good++. (R1-151)

0764. SATTLEY MFG. CO. - 1031 - - 12.5" Disc plow wrench with disk straightening slot. Good++. (R1-413)

0765. D943 (Stoddard) - - 14.25" Good++. (R3-211)

0766. DH29 (orphan) - - 16". Good++, painted. (not listed, no info found)

0767. PARKER PLOW CO (Richmond, Mich.) - - 9.5" Good++. (R1-369)

0768. CHILDS / WOOD BEAM (Chas. H. Childs & Co. - Utica, New York)- - 9.75" Good++. (R1-103)

0769. R-I. P. Co - L049 / Hay Loader (Rock Island Plow Co.) - - 7.5". Good+. (R#400)

0770. DEANE - 5378A / OF HOLYOKE (with a diamond logo) (The Deane Steam Pump Co. - Holyoke, Mass.) - - 9.25". Good++. (R1-129)

0771. BAILOR PLOW CO / ATCHISON KAN. - C49) - - 9.75" Good+. (R1-38)

0772. CANADIAN P.M. CO (Canadian Potato Machine Co. - Gait, Ontario, Canada) D59 - - 8" doe-s wrench like the OK Champion No. 59 wrench. Good++. (R2-49)

PiCs Lots 755 thru 772

0773. GREENLEE / GREENLEE - - 8.25". Good+, light pitting. (R1-208)

0774. PLANET JR. / H4 - MADE IN THE UNITED STATES OF AMERICA (S. L. Allen & Co - Philadelphia, Penn.) - - 8.5" with double hammer polls. Good++ (R1-380)

0775. PLANET JR. / H4 (S. L. Allen & Co - Philadelphia, Penn.) - - 8" with double hammer polls. Good++, rusty, not cleaned. Variant not marked "USA" not in Rathbone. (see R1-380)

0776. LA CROSSE / ND86 (Lacrosse Plow co. - La Crosse, Wisc.) - - 9". Painted with some pitting. (R1-289)

0777. CHALLENGE (Batavia, Illinois - Mfg. windmills, gas engines, etc.) - - 7". Good++. (R1-93)

0778. Lot of Two: Grand Detour Plow Wrenches
(1.) 13 (Grand Detour Plow - Dixon, Illinois) - - 7.75" open, loop handle wrench with hammer poll. Good++. (R3-94)
(2.) G13 Grand Detour Plow - Dixon, Illinois) Not in photo. - - 8". similar wrench to above except has an additional small open end wrench on the end of the handle shaft. Good+ with some pitting.

0779. Roderick Lean (Mansfield, Ohio) / E6 - - 8.5". Good++. (R1-294)

0780. RODERICK LEAN (Mansfield, Ohio) - - 11.75" No part number variant Good+, some minor pitting. (R1-294)

0781. SHARES / N167 (Janesville Machine Co.) - - 5.5". Good++. (R1-265)

0782. P3641 (Verity Plow Co., later Massey-Harris) - - 12.5" Rare disc plow wrench with disk straightening slot. Has repaired jaw, light pitting. (R2-283)

0783. WORCESTER M371 / WORCESTER (Richardson Mfg. Co. - Worcester, Mass.) - - 10" with a slight bend. (R1-498)

0784. THE DEISTER CONCENTRATOR CO (Fort Wayne, Indiana) / 58 - 5Z (with a "R" in a circle logo) - - 13". Weld repair. (R1-140)

0785. FLEURY - SULKY AURORA. (J. Fleury's Sons -Aurora, Ontario, Canada) - - 10.75" Good+. (R1-178)

0786. NEBRASKA MFG CO. / 26 (Lincoln, Neb.)- - 12". Rare impressive looking Nebraska wrench. Won first choice at the Minden, Nebraska Fair Grounds. Good+. (R1-347)

0787. CHASE PLOW CO (Lincoln, Neb.) - - 10.25". No part number variation. Good++. (R1-97)

0788. CHASE TINSMAN PLOW CO (Lincoln, Nebraska) - - 10.25". Excellent. (R1-97)

0789. CUTTER (Appleton?) - - 9.75" Good+ with grind marks on the jaw edges. (R2-70)

0790. THE J. I. CASE PLOW CO / CHILLED PLOW - 1-1/8 - - 9.75". Rare, early Case Plow wrench made before 1884 when the name changed to the Case Plow Works. Rathbone shows two versions of this wrench, one is marked with the part number "89" and this one marked "1-1/8" with no part number, We have never had an example of either one to sell before. Good++. (R2-51)

0791. PPY (Eureka Mower Co) - - 7.75" Good++ (R1-169)

0792. ALLIS-CHALMERS MFG. CO. - LA CROSSE WORKS (with a "NR" in a circle logo) / 300755 - - 11.5". Good++. (R1-11)

PiCs Lots 773 thru 792

0793. Lot of Two: Walter A. Wood (Hoosick Falls, NY) Wrenches (R1-494)
(1.) WOOD / WOOD (raised, high relief letters) - - 10" with eight wrench sizes, small hammer poll and two holes variant. Good++. (R1-494)
(2.) WOOD / WOOD (raised, high relief letters) - - 10" with eight wrench sizes, no hammer head, no holes variant. Excellent. (R1-494)

0794. G. M. CO. - 9/16 and 5/8 / PEERLESS (Geiser Mfg Co - Waynesboro, PA) - - 10.5". Painted, some light pitting. (R1-200)

0795. G. M. CO. 7/16 and 1/2 / PEERLESS (Geiser Mfg Co - Waynesboro, PA) - - 8.75" Good++ (R1-200)

0796. NICHOLSONS / 8127 (W. H. Nicholsons - Newark, England) - - 8.5". Good++.(R1-353)

0797. Y153 (Rock Island Plow Co) - - 4.5". One of the smallest cast implement wrenches. Excellent but painted. (R1-401)

0798. COCKSHUTT PLOW CO LIMITED - Y - - 11". Good++. (R1-107)

0799. CENTRAL A. S. CO. / PHILA PA - - 8.75" fire sprinkler wrench?

0800. E BEMENT AND SONS LANSING MICH. / J181-1/2 - - 8" by 12.25". Good+. (R1-49)

0801. CALEDONIA N.Y. (Caledonia Bean Harvester Works) - - 8". Square by open end variation. Excellent . (R1-75)

0802. THE OHIO CULTIVATOR CO (Bellevue, Ohio) / DA32 - - 16". Good++ with some original finish. (R1-357)

0803. GEISER MFG' CO. / WAYNESBORO PA. 597 - - 15.5" Steam Engine wrench. Also found marked "597G". Good++, some light pitting, not cleaned. (R2-113)

0804. G. M. CO. - 3/4 and 7/8 / PEERLESS (Geiser Mfg Co - Waynesboro, PA) - - 12.5" Painted, some pitting. (R1-200)

0805. DELUX / IRON FIREMAN (Portland, Oregon and Cleveland, Ohio) - - 11.75". Good+. (not listed)

0806. NEW COMBD - - 6.5" Good++, painted. (R1-348 with no info)

0807. Lot of Two: Look -A-Like Wrenches From Different Companies
(1.) D1 (Grand Detour Plow Co. later J. I. Case Threshing Machine Co.) - - 11.5" Good++. (R3-94)
(2.) PERU (Peru Plow Co., Peru, Illinois) - - 11.5". Good+ with pitting. (R1-378)

0808. MONITOR (Baker Mfg. Co? - Evansville, Indiana) - -7". Baxter Mfg. Co. made Baxter windmills. Pitted. (R2-107)

0809. BLOUNT (name only no part number) - - 10" with some pitting. (see R2-37)

PiCs Lots 793 thru 809

0810. POST'S CAPITAL CITY - Raritan, New Jersey)- - 8" Good++. (R1-384)

0811. 103 HAWORTH'S / 103 CHECK ROWER - - 7.5". Fork or claw on end variant. Damage to the square opening. (R1-227)

0812. N201 (Nelson Bros - Saginaw, Mich. and Racine Sattley / Montgomery Ward) / (double diamond logo) - - 6.5" Gas Engine four-way socket wrench. Good++. (R2-257)

0813. HAYES - EB315 (Hayes Pump & Planter Co. - Galva, Illinois) / ("A" in a circle logo) - - 4" by 7" tee socket with two hex and one special sockets. Good++. (R1-227)

0814. P45 (Red Jacket Mfg. Co. - Davenport, Iowa) - - 10.5". Unusual shaped wrench with two open ends and a large center hex. Excellent. (R3-182)

0815. G18 (oddball orphan) - - 12". Look similar to the IHC V265A wrench. (see R1-255). Excellent, painted. (not listed, no info found)

0816. Lot of Two: Cockshutt Plow Co. Wrenches
(1.) G532 (Cockshutt Plow Co.) - - 13.5" with a large hammer head. Fair with pitting. (R1-107)
(2.) G502 (Cockshutt Plow Co.?) - - 13.5" with a large hammer head. Same wench as Cockshutt G532 above. (unlisted, no info found)

0817. OWATONNA DOUBLE DISC (Owatonna, Minn.) - - 7.5". Good++. (R1-365 )

0818. AA (Cockshutt Plow Co.) - - 11" oddball with large hammer head. Good++. (part list illustration only at R1-107)

0819. B26 / HAMILTON (Ontario, Canada) - - 10.5" with a large hammer head. Same wrench as the Coop Bros B26 wrench below but only Marked "Hamilton B26". There are ghost markings on the other side resulting from letters being partially removed from the mould pattern. Good++. (not in Rathbone)

0820. COOP BROS CO L'D - B26 / HAMILTON (Ontario, Canada) - - 10.5" with a large hammer head. Good+. (R1-113)

0821. WILKISON (sic) PLOW CO. - TORONTO - NO. 90 - - 10.75" with hammer head. Note spelling: "Wilkison vs. "Wilkinson". Excellent. (R1-489)

0822. CROSS HEAD / YARD (orphan) - - 7". Good++, "Yard" is faintly stamped on the back side. Painted. (R3-58)

0823. G D MAYO MACHINE CO. - - 6.5". George D. Mayo of Franklin, New Hampshire received a patent for a knitting machine on April 21, 1903. Excellent. (not in Rathbone)

PiCs Lots 810 thru 823

0824. Lot of Six: Farm Implement Wrenches (all have pitting)
(1.) N. C. / L (New Casaday - South Bend Chilled Plow Co.) - - 12.5" with hammer head. One open end variant. (R1-429)
(2.) Z83 (David Bradley) - -7.25". Severe pitting. (R1-126)
(3.) NO 5S (Cockshutt Plow Co.) - - 10.25". Severe pitting. (R2-61)
(4.) PIRATE / WRENCH (St. Paul Plow Co or Peru Plow Co) - - 12". Severe pitting. (R1-378, R1-434)
(5.) GREENVILLE PLOW WKS - - 10.25". Three open and one square by one open end variation. Rare Michigan wrench but with severe pitting, minor jaw crack. (R1-208)
(6.) K243 (Kingman Plow) - - 10.5". Pitted. (R1-284)

0825. PARIS (Paris Plow Co - Paris, Ontario, Canada, also on the IHC list ) / P - - 9.5" Emerson style, four opening variation. Good, painted. (R1-368)

0826. LE ROY - G / X37 (Le Roy Plow Co., New York) - - 11.25". Good++. (R1-291)

0827. ROCK ISLAND PLOW CO. - H358 - - 13". Good+ with some pitting. (R1-400).

0828. Y32 (Chas. G. Allen Co. - Barre, Mass.) - - 8" oddball pitman wrench. Excellent with extra bold, high relief markings. (R1-9)

0829. DOWAGIAC / F97 (Dowagiac Mfg. Co. - Dowagiac, Mich.) - - 9". Excellent, with faintly marked part number. (R1-149)

0830. DOWAGIAC / F97A (Dowagiac Mfg. Co. - Dowagiac, Mich.) - - 5.5". Excellent. (R1-149)

0831. JFS (J. Fleury's Sons - Aurora, Ontario, Canada) - - 11" Good+ with light pitting. (R1-178)

0832. Clipper / Defiance (Clipper Plow Co. - Defiance, Ohio) - - 8.75". Good++. (R1-105)

0833. PRINCESS / PRINCESS (Princess Plow Co. - Canton, Ohio) - - 9.5". Painted, some pitting. (R1-386)

0834. THE NATIONAL / AMMONIA CO. (Southampton, Penn.?) - - 7.75". Good++. (R1-346 with no info)

0835. FRICK CO 1008B / ECLIPSE 1/4 and 5/16 (Waynesboro, Penn.) - - 5.25". Good+, casting flaw on one part number digit. (R1-185)

0836. Lot of Three: Grand De Tour Plow Co. (Dixon, Illinois) No. 10 Wrench Variations. (R1-205)
(1.) NO 10G DISC (Grand Detour Plow) - - 10.25" with three open ends. Excellent but it looks like one end has been enlarged.
(2.) NO 10 DISC (Grand Detour Plow) - - 10.25" with two open ends. One pictured in Rathbone has a broken jaw. Good++.
(3.) G.D.P. CO. - NO. 10 / SHARE WRENCH (Grand Detour Plow) - - 11.5". Rare wrench but severely pitted. Others seen have also been pitted.

PiCs Lots 824 thru 836

0837. Lot of Thirty-Three Unmarked Orphan and Oddball Wrenches

PiCs Lot 837

0838. Lot of Fifteen Unmarked Orphan and Oddball Wrenches

PiCs Lot 838

0839. Lot of Twenty-Four Unmarked (or markings not readable) Buggy Wrenches

PiCs Lot 839

0840. Lot of Twenty-Three Buggy Wrenches. (all marked with Eberhard's "E" in a circle logo and the Eberhard catalog number)

PiCs Lot 840

0841. Lot of Twenty-Two Smaller Unmarked Orphan and Oddball Wrenches

0842. BUCKEYE - PAT APLD FOR - A3 / C B & F CO - SPGD O (Springfield, Ohio) - - 9" combination spark plug wrench and tire tool. Good++ with a small casting flaw.

0843. T11 - HASSLER (with two spoked wheel logos) (same markings both sides) - - 10" double hex box ends. Hassler's main products were Ford after market shock absorbers. Good+ with some pitting, mostly on back side.

0844. HAYES WHEEL CO - JACKSON MICH. - WW4 (with an "A" in a circle logo) / (ghost markings on reverse side) - - 13.75". Good with edge dings.

0845. HOUK MFG CO - BUFFALO NY / 6146A - - 16.25" wire wheel hub wrench. Excellent. (R1-240)

PiCs Lot 841 thru 845

0846. Lot of Two: Odd and Orphan Wrenches
(1.) Z147 Pitman Wrench (orphan) - - 45.75". Excellent.
(2.) Marked only "K" / (can't read the three digit number) (orphan) 9" neat odd ball with seven wrench openings. Severely pitted. (incorrectly listed under Huber wrenches , see R2-134)

0847. S D & COE - 21 (Stringer. Dexter & Coe) - - 8.75". With part number variant Good+ with light markings as usually seen. (R1-408)

0848. Lot of Three: Farm Wrenches
(1.) C338 (P. P. Mast, later Superior Drill Co, later Am. Seeding Mach. Co.) - - 8.75" with hammer head. Good++. (R1-314, R1-446, R1-16)
(2.) D888 (Ohio Rake) - - 8.75" with hammer head. good+. (R1-359)
(3.) P4973 (Verity then Massey-Harris) / (with a "IM" logo for Illinois Malleable Iron Co.) - - 8.75" Good++. (R2-182)

0849. 883 (Massey-Harris) / C - - 14.5" Good++ (R1-312)

0850. Lot of Two: Farm Wrenches
(1.) PP CO. - 182 (Pattee Plow Co - Monmouth, Illinois) - -14". Some light pitting. (R1-373)
(2.) DP109 (Oliver) - - 11.5" Good+ with overall light pitting or casting roughness, not cleaned. (R1-360)

0851. Lot of Two: Verity - Massey-Harris Wrenches
(1.) P4841 (Verity Plow Co later Massey-Harris) - - 15 ". Good++ with a casting flaw. (R2-183)
(2.) P11326 (Verity Plow Co later Massey-Harris) - - 14.25". Good+. (R2-183)

0852. GALE / SWIVEL PLOW - - 9". Rare Gale wrench but it is badly pitted. (R1-193)

0853. Lot of Three: One Caterpillar and Two Carbonating Machine Wrenches Machine Wrenches
(1.) 6F8703 (Caterpillar) - - 8.5" drain plug wrench. Probably a mold pattern error for Cat wrench 6F3703. Excellent (see R3-343)
(2.) L. C. A. MFG CO (Liquid Carbonic Acid Mfg. Co. - - 8.5". Good+, some edge hammer damage. (R1-289, no info.)
(3.) PURE CARBONIC INC. - - 8". Good++.

0854. Lot of Three: Verity - H. V. McKay - Massey-Harris Wrenches
(1.) P315 (Verity then Massey-Harris) - - 10.75" Good+ (light pitting) (R2-283)
(2.) P337 (Verity then Massey-Harris) - - 10.75" Good+. (R2-283)
(3.) P206 (H. V. McKay than Massey-Harris) - - 10.75" Good. (R2-191)

PiCs Lot 846 thru 854

0855. THE GENUINE MATTHEWS SEED DRILL - 4W - AMES PLOW CO. - BOSTON & NEW YORK SOLE MAKERS - PATENTED APRIL 27, 1897 - AUG 28, 1900 - - 5.25" grain drill lid. Good+.

0856. Dogbone wrench advertising ABEL OIL CO. (with Goodyear tires and Shell gasoline logos) - MADE IN USA - - 4". Excellent.

0857. Lot of Three: Advertising Give-A-Way Crow Bars
(1.) GRESHAM GRAIN CO. - GRESHAM, NEBR. - - 11.25". Good++.
(2.) A LITTLE THANK YOU FROM - FREEMAN OIL - WAKEFIELD, KS - - 9.75". Good+.
(3.) CO-OP LUMBER CO - MARQUETTE, NEBR. - - 9.75". Good+.

0858. Lot of Two: Advertising Give-A-Way Automobile Lug Wrench and Tire Tools
(1.) ? ? ELLINWOOD - REPLACEMENT PARTS - NORWICH, N.Y. - - 13.75". Good+.
(2.) BITTENBENDER'S GARAGE - TOWING AND WRECJKING - 25 HOUR SERVICE - -

0859. Lot of Two: Misc. Wrenches
(1.) HOUGHTON SULKY (with an arrow logo) - - 5.25" flat steel. Excellent. (R2-132)
(2.) L. M. (orphan) - - 6". Two open wrench ends with a screw driver on the end. Good++. (R1-289, with no info)

0860. B. CO. / 842 (T. E. Bissell - Elora, Ontario, Canada) - - 8.75". Good++. (R1-29)

0861. C.P. CO.. (orphan, may be Clipper Plow. Co. - Defiance, Ohio) - - 10.75". Good+ with overall light pitting, weak makings. (R2-48)

0862. Unmarked (like Wheelers Self Rake - Cayuga Chief, Osborne, IHC) - - 10.75". Good+. (see R1-486)

0863. KGMC (orphan) - - 9.5". Looks like Deere 148 wrench. Good+. (R1-275, no info)

0864. 5015T (Case T. M. Co.) - - 7" key wrench for Case Grain Separator. Good ++ (R1-81)

0865. 2152 (Walter A. Wood) - - 7.25" pitman wrench. Good++. (R1-494)

0866. Lot of Two: International Harvester Wrenches
(1.) 3613 / P & O CO CANTON ILL- - 12.25". Good++, not cleaned. (R1-370)
(2.) 295 (P & O and IHC) - - 8". Four open ends with straight shaft variation. Good+. (R1-371, parts list illustration only ) .

PiCs Lot 855 thru 866

0867. Advertising give-a-way paring knife - "Pioneer Seed Corn" with paper sheath marked "Quikut - Chef's Choice - Custom Ground - Quikut - Fremont, Ohio". Excellent. like new.

0868. Advertising tape measure - "Plant Tomson Hybrids - Always a Good Rule". Good with some signs of wear.

0869. Lot of Four: Corn Seed Advertising Give-A-Ways
(1.) IMPERIAL - PROV. R. I. USA - - 3.25" Two bladed pocket knife advertising "Pioneer Brand Seeds" Good++.
(2.) BASSETT - USA - PATD 2779098 - - Three bladed key chain multi-knife with one knife blade, screwdriver, bottle opener and file advertising "Golden Acre Seeds" Excellent.
(3.) Plastic DeKalb winged ear of corn pin - - Part of pin on the back side is missing.
(4.) Key chain finger nail clipper - BASSETT - USA advertising "Pioneer Seeds". Excellent.

0870. Lot of Two: John Deere Advertising Pocket Tape Measure / Key Chain Fobs (with leaping deer logos)
(1.) Reverse side marked "Southwest Implement Co. - McCook, Nebraska" Excellent.
(2.) Reverse side marked "Garden County Impl. Co. - Oshkosh, Nebr." Excellent.

0871. Lot of Three: Older Eversharp Pencils Advertising Corn Seed Companies
(1.) DeKalb (with winged ear of corn logo) "DeKalb Quality Hybrids 'The Corn the Farmer's Like' - A. W. Kern -Phone 30 or 108 - Richmond, Iowa".
(2.) Pfister (with a ear of corn and mailbox logo) "Pfister Hybrid Company - Fremont, Nebraska - 8 out of 10 Times Higher Yields" - - Minor chip on eraser end.
(3.) DeKalb (with winged ear of corn logo) "Make Every Day count". With 1940 and 1941 calendars.

0872. Lot of Eight: Corn Seed Company advertising Pencils and Ball Point Pins
(1.) "Grown & Processed by Bo-Jac Hybrid Corn Co. - Mt. Pulaski, Illinois" - - wooden pencil. Excellent, not sharpened.
(2.) DeKalb (with winged ear of corn logo) "More Farmers Plant DeKalb Than Any Other Brand" - - wooden pencil. Excellent, not sharpened.
(3.) "Midland Soybean Seed - Phillips Seed Farms" - - Ball point pin.
(4.) DeKalb winged ear of corn logo - Hybrid Sorghum - Robert F. Ross - R.R. #2 - Burrton, KS - - Ball point pen (Ready Rider Brand)
(5.) "Compliments of Your NC+ Hybrids Dealers - The First in Progress, Performance & Quality" - - Ball point pen (Ready Rider brand)
(6.) "Garst Seed Company (logo) - Coon Rapids, Iowa" - - Ball point pen.
(7.) Two DeKalb winged ear of corn logos - - Ball point Pen (Ritepoint brand)
(8.) "Pioneer Sales Rep. Weldon Wenger - 283-2232" - - Ball point pen.

0873. Lot of Two: IHC and Oliver Advertising Items
(1.) Pocket Ledger with 1929 and 1930 calendars advertising "McCormick-Deering Farm Machines and Implements - Langdon Imp. Co. - Langdon, Kans - 'Good Equipment Makes A Good Farmer' " - - Excellent, unused, like new.
(2.) Original, unused decal advertising "Oliver (with Oliver's shield logo) 'First in Farm Machinery' General Hardware Co. - Hillsboro, Kansas - Phone 40 - Sales - Service" - - Excellent.

0874. All metal screwdriver - "J. I. Case Threshing Machine Co. - Racine, Wisc. / Case Threshers, Tractors. Balers, Silo Fillers, Automobiles, Road Building Machinery, and Grand DeTour Power Plows" - - 5.25". These advertising screwdrivers are usually found in poor condition, this one is Excellent.

0875. 12" metal ruler with 1952 and 1953 calendars advertising the Standard Implement Co. - Holyrood, Kansas - Phone 10 - ."McCormick-Deering Tractors and Machines - International Trucks - Farm Implements and Refrigeration". Excellent, like new.

PiCs Lot 867 thru 875

0876. B & H / 1371 (Bickford & Huffman - Macedon, NY) - - 7". Good++. (R1-32)

0877. 1118B / ("P" in a circle logo) (Buffalo Pitts, Belle City / Racine / IHC) - - 8.5" double socket. Good+. (R1-251)

0878. CD (W. R. Harrison Co. - Massillon, Ohio) - - 7.75" by 7.5". Rare odd tee wrench. Good++. (R3-103)

0879. Lot of Two: Cockshutt and Rock Island Wrenches
(1.) P4185 (Cockshutt Plow Co.) - - 10.5" Hub type wrench. Excellent. (R2-61)
(2.) S329 (Rock Island Plow Co) - - 9.5". Excellent. (R1-401)

0880. Lot of Two: K439 Pitman Wrenches (Quite a history for this wrench: Osborne then IHC then E-B and finally Case T. M. Co.)
(1.) K439 / E-B (Emerson) - - 7". Good++ (R1-162)
(2.) K439 MADE IN UNITED STATES OF AMERICA / (Case Eagle Logo and a "P" in a circle logo) (Case T. M. Co.) - - 7". Good++. .(R1-82)

0881. 883C (Case T. M. Co.) - - 16.25" doe-s for Case Steam Engines. Good. (R1-81)

0882. Lot of Two: Farm Wrenches
(1.) WP1 (Tudhope-Anderson - Orillia, Ontario and Winnipeg, Manitoba, Canada - Also on the IHC List) - - 10". Good+, light pitting. (R2-279)
(2.) W. P. Co. 94 (Wiard Plow Co. - Batavia, NY) - - 11". Good++. (R1-488)

0883. CASE / 76L - - 7" Grain Drill wrench with stud Good++ (R1-77)

0884. 886C with a "X" (Case T. M. Co.) - - 7.75" doe for Case Steam Engines. Good + (R1-81)

0885. Lot of Two: F239 (Oliver and Canadian IHC-Hamilton Plow) Look-A-Likes. (see R1-360)
(1.) Marked only "C" (orphan) - - 9.5". Poor markings.
(2.) Marked only "Y" (orphan) - - 9.5", Good++.

0886. Lot of Two: Farm Wrenches
(1.) C188 (Rock Island Plow Co.) - - 10.25" with hammer head. Marked on small end variation. Good++. (marking variation not in Rathbone)
(2.) 101 - - 14". Looks like Stover Mfg. Co. wrench. Good++. (see r1-443)

PiCs Lot 876 thru 886

0887. Lot of Nine: Case Threshing Machine Wrenches
(1.) CASE 031W - - 11.5" flat steel. Good.
(2.) CASE W7660S - MADE IN USA - - 10.25" flat steel. Good+.
(3.) CASE W7659S MADE IN USA - - 9.25". flat steel. Good++.
(4.) CASE W7658S MADE IN USA - - 7.75" flat steel. Good+.
(5.) 3329A with a "X" and Case Eagle logo (Case T. M. Co.) - - 8.5". Good++. (R1-82)
(6.) 5548T with Case Eagle logo (Case T. M. Co.) - - 7.75". Early Case Threshing Machine wrench. Fair. (R1-81)
(7.) 5524T - Case Eagle logo (Case T. M. Co.) - - 5.5" by 11". Tee socket wrench. Vertical numbers variation. Good++. (R1-82)
(8.) 46CL - (Case Eagle logo) (Case T. M. Co.) - - 8" by 8" Tee socket wrench. Good++. (R1-82)
(9.) OK1294 - Case Eagle logo (Case T. M. Co.) - - 9". H-shaped with pitman flange. The "Goal Post Wrench". Good+. (R1-82).

0888. Lot of Seventeen: Misc. Farm. Etc. Wrenches (most with pitting or other damage, (including a rare Bryan Plow (of Bryan, Ohio) wrench with a broken jaw) (R1-67)

PiCs Lot 887 and 888

0889. Lot of Seven: International Harvester Pitman Wrenches

0890. Lot of Six: P & O / IHC Wrenches

0891. Lot of Twenty: International Harvester Wrenches

PiCs Lot 889 thru 891

0892. M451D with IHC logo - - 18.25" threshing machine cylinder wrench and straightener. Good++. (R1-254)

0893. Lot of Seven: International Harvester Wrenches

0894. Lot of Seven: International Harvester Wrenches

0895. Lot of Six: DEERE flat steel wrenches (John Deere No. 1008) - - 11.5". Three variations (one not listed on Dill's List). (D111, D112)

PiCs Lot 892 thru 895

0896. 1B5171 T 6 (Caterpillar) - - 8.5" Drain plug wrench Good++. (not pictured in Rathbone)

0897. AJ82 (orphan) - - 7" cast double socket. Good+ with some hammer damage on one end, (not listed, no info found)

0898. Lot of Two: Misc. Wrenches
(1.) 768A (Adriance Platt & Co. - Poughkeepsie, NY, later Moline Plow Co.) - - 7.75". Good with pitting. (R1-5, R1-332)
(2.) CROWN CORK AND SEAL CO - - 8.5". Extra thick, heavy wrench. The founder of Crown Cork and Seal started this company in Baltimore in the 1890's to produce his patented Crown bottle caps. These wrenches may be for their bottle capping equipment they also manufactured. Pitted. (More Info) (R1-119)

0899. ACME - M210 (Acme Hay Harvester Co. - Peoria, Illinois) - - 7.5". Excellent. (R2-2`)

0900. 8140 (Reeves & Co. - Columbus, Indiana, later Emerson-Brantingham) - - 10.25". steam engine wrench. Rarer than the marking variation with "R" suffix. Good+ with some pitting. (R2-245)

0901. 6774 with a diamond logo (Geiser Mfg. Co. - Waynesboro, Penn.) - - 10" Excellent. (R3-91)

0902. TRIMO - TRIMONT MFG. CO. - ROXBURY, MASS U.S.A. / SIZE 12" - PAT'D 12-19-11 - - 12" all metal nut wrench with the washer type nut guard. Patent was issued to John H. Vinton of Boston, Mass. Excellent. (S1084)  PAT.

0903. SUPER GRIP TOOL CO IOWA - PAT 1-16-33 - - 8" pliers with a geared cam mechanism. Patent was granted on June 27, 1933 (not Jan 16, 1933 as marked on the pliers) to Gilbey M. Clifton of Perry, Iowa. Good+ with some damage to pivot bolt head. (S245)  PAT.

0904. M. SCHWENDNER - READING PA. U.S.A. / PAT. SEPT. 3, 1907 - DROPPED FORGED - 10 IN. - - 10" rack type quick adjust nut wrench. Patent was issued to Max Schwendner of Reading, Penn. Rare wrench in Good+ condition with spots of pitting mostly on one side. (S544, C276)  PAT.

0905. L. S. KELLOGG MFG CO RACINE, WIS - - 8.5" combination screw and quick adjust advertised as the "Rider Patent Lightning Wrench". Knurled adjusting nut is pulled outward to release rack teeth and spring loaded lower jaw assembly. Patent was issued to Ebenezer Rider of Racine, Wisc. on June 21, 1892. Good+. As usual there is a tiny crack in metal where stop screw hits, edge hammer ding. (S503, C188)  PAT.

0906. PAT OCT. 04, 87 - - 8.5" malleable combination hammer, tack puller, pliers, and tongs, Patented by Jacob Souders of Greentown, Ohio. Excellent. (Hammer Book 35-10)  PAT

0907. 406 WESTCOTT - THE KEYSTONE MFG CO / BUFFALO NY (etc.) - - Solid handle. Scarce, different slimmer design than usually seen. Only the second one we have had to list. Good+.

0908. 8 IN ELLIS / PAT NOV 8, 03 - - 8" Crescent type with pivoting head (variation without the jaw release knob). The Nov. 8, 1903 patent has not been found, a patent granted to David Ellis of Chicago, Illinois on May 17, 1904 is probably the correct patent. Good+. (similar to S308)  PAT

0909. Lot of Two: Different Crescent Type Adjustable Wrenches
(1.) 10" PIPE / ("T" in a circle logo) (made by Tower & Lyons?) - - 10" with curved open handle and the quick knurled gear removal feature. Good++. Has smooth nut type jaws rather than serrated pipe jaws.
(2.) WESTCOTT - KEYSTONE MFG. CO. / AUTO 8 INCH (listed in IHC parts books as IHC No, 8371H) - - 8" curved handle Crescent type adjustable wrench. Open handle variation. Good+ with minor jaw edge dings.

PiCs Lot 896 thru 909

0910. CLEVELAND WRENCH CO. - FORGED IN USA / 10 IN - PATENTED - "CLEVELAND" - CHROME ALLOY - - 10" self adjusting wrench, marking variation. Patented by Edward Matthews of Denver, CO. on June 27, 1944. Excellent with plated finish. (S331)  PAT

0911. KANT-SLIP - PAT APR. 27, 1920 - AUG 2, 1921 - OTHER PATS. PENDING - / A.D. WRENCH. & TOOL CO (Allan-Diffenbaugh Wrench & Tool Co.) - BARABOO, WIS - - 9.5" plier wrench with a hammer poll. Patented by Allen C. Allan of Baraboo, Wisc. Good+ with some weak markings. (S356)  PAT.

0912. KWIKSET - A. G. PIPE WRENCH - PAT SEPT. 7, 1926 - - 12.25" quick adjust rack type pipe wrench with a lever that controls the upper jaw. Patented by Carl, Emil, and Sigfred Bjornson from Bentley, Alberta, Canada. The A. and G. stands for Joe Adams and Archie Grey of Marshalltown, Iowa. Good+ with spots of light pitting. (S686)  PAT

0913. Gregory Wrench - PAT PEND / GREGORY DESHANE MFG CORP - - 14" self adjusting wrench. Patented by Roy L. Gregory of Everett, Wash. on May 11, 1948. Jurassic predatory bird wrench design that look like it should be about 100 years older than it is. Excellent. (S672)

0914. ADJUST-A-BOX - PAT NO. 2,912,891 / 8 IN. - MFD. USA - ALLOY STEEL - - 7.5" Screw adjust box end wrench. Patented by Ted Neff of San Bernardino, Calif. Excellent with plated finish. (not listed)  PAT

0915. "VICTOR" TRADEMARK - PAT. DEC 23, 1902. PAT.- AUG 25, 1903 / BONNER'S PAT. 1902 - 1903 - - 15.25" quick adjust pipe wrench made by the Bonner Mfg. Co. of Chrisman, ILL. and patented by Clarence E. Bonner, Cherrypoint, IL. Good+ with some pitting. (S653)  PAT

0916. PETERSEN TOOL CO. (El Dorado , KS) / PAT. PEND. - USA - - 9.75" quick adjust nut wrench. Excellent with plated finish.

0917. THE JOHNSTON AUTOMATIC - PAT JULY 30, 1895 - - 14.75" self adjust with pivoting upper jaw. Mfg. by W. T. Johnson & Co. New York and patented by Walter Johnston of Macon, Georgia. Good+ with minor jaw chips, weak markings. (S336)  PAT.

0918. UTILITY - HILL PUMP VALVE CO. - CHICAGO USA - PAT. OCT. 23, 1917 - - 11.25" brace type wrench with an adjustable sliding socket. Patented by Charles A. Olson and Claude H. Toombs of Geneva, ILL and advertised as "The New Utility Rim Wrench". Good+ with some dings to the rivet that holds the sliding chuck. (S56, C166).  PAT.

0919. CRICK - IT (cricket logo) DAVENPORT TOOL CO. - ELDRIDGE, IOWA - PAT. PEND. - - 7.5" ratchet with handle that you squeeze to rotate socket. Patents was issued to Henry Merriman and Clifford Burbank (both of Jackson, Mich. An interesting gizmo. Good++. (S158)  PAT.

0920. Z 10 IN / PAT APL'D FOR - - 9.75" malleable quick adjust nut wrench. Scarcer 10" size nut wrench variation. Patented 10-31-1905 by F. Zwicker of Indianapolis, Indiana. . Good+ with pitting. (S550)  PAT.

0921. Unmarked - - 10.5" cast combination pliers type tool like one seen marked "L. D. B. CO. PHILA " ( L. D. Berger Bros. Co. - Philadelphia, Penn.) Advertised as a tool to clinch roof gutter hangers and other uses in the roofing trade. Excellent. (not listed)

0922. E. RIPLEY'S PATENT - APRIL 7, 1857 (same markings on both sides) - - 12.25" malleable iron combination hammer, screwdriver, and rack type quick adjust wrench. An early pre Civil war patented combination tool. Excellent with some blurred markings. (S824)  PAT

PiCs Lot 910 thru 922

End of cataloged individual lots. There may be additional unlisted lots

Choice Box Lots (will be sold choice item from each lot)

Choice Box 001: Lot of Seven Six Inch Adjustable Nut Wrenches
(1.) B & C (Bemis & Call) / 6 IN - - 6" curved handle Crescent type wrench, open handle variant. Good+.
(2.) B & C (Bemis & Call) / 6 IN 48A - - 6" curved handle Crescent type wrench, solid handle variant. Good+.
(3.) WESTCOTT - KEYSTONE MFG. / 6 INCH NO. 76 - BUFFALO NY USA - - 6" S-handled Crescent type wrench. Good+.
(4.) ROBINSON / DROP FORGED STEEL - - 6" curved handle Crescent type wrench Good++.
(5.) A. G. COES & CO. - WORCESTER, MASS. / PAT'D (steam engine logo) DEC 26, 1871 - - 6" wood handled monkey wrench. Rare 6" version with the steam engine governor logo and patent date. Good+ with a jaw chip. (HP20 on one side and HP21 on the other side)
(6.) L. COES PAT'D DEC 15, 1891 - APR. 30, 1895 - - 6" knife handle with handle ferrule spur extensions. Tight handle crack, some dings. (HP50)
(7.) P. S. & W. CO. - WARRANTED / PATENTED JUNE 16, 85 - - 6"" wood handled monkey wrench with Squire Robinson's (Southington, Conn.) patented extended ferrule shoulder that holds the adjusting screw in place, Rare to see this feature on a Peck Stow & Wilcox wrench. Good+, minor handle chip, stamped with owner's ID "A. Parrett".  PAT.

Choice Box 002: Lot of Six Forged Wrenches
Some are shop made. 7.5" - 20.5".

Choice Box 003: Lot Six Bicycle and Pocket Size Adjustable Wrenches. Fair to Good.
(1.) Billings &: Spencer "A" - - 4.5".
(2.) Mossberg Sterling No. 1 - - 5".
(3.) Mossberg A-1 - - 5"
(4.) Mossberg Sterling No. 1 - - 5".
(5.) EXTRA JAW 25¢ - - 7" adjustable alligator wrench. "The Elgin" markings aren't readable because of an area of pitting, rest of wrench is Good+.
(6.) THE ELGIN PAT JUNE 8, 97 - EXTRA JAW 25¢. - - 7" adjustable alligator wrench.

PiCs Choice Lots 1 thru 3

Choice Box 004: Lot of Eight Farm Implement Wrenches
(1.) 1AA (Brown-Manly Plow Co. - Malta, Ohio). Excellent.
(2.) (ruler markings / M3 - - 10.25" Ford Plow type wrench and plow furrow ruler. Good++.
(3.) 12737DA (IHC) - - 5". No logo variant. Good++.
(4.) G3526 - IHC logo - - 11.5". All markings raised. Spots of minor pitting.
(5.) 3 - PLANET JR. / PLANET JR. - - 6.25" with some pitting.
(6.) M141 / (IHC) - - 9". All markings indented, no IHC logo variant. Excellent. (R1-254)
(7.) 13 (orphan) - - 6" doe garden cultivator type with angled ends. Excellent.
(8.) Fordson tractor hubcap wrench - - 11". Excellent except for minor wear from use as a hitch pin.

Choice Box 005: lot of Eight Flat Farm Implement Wrenches
No. 2 is marked DEERE, others are not marked (Oliver, Etc.)

Choice Box 006: Lot of Seven Forged Wrenches
No. 1 is a Billings 1136, No. 2 is a Herbrand 679, rest are unmarked. 5.5" - 11".

PiCs Choice Lots 4 thru 6

Choice Box 007: Lot of Five Misc. Wrenches and Other Tools
(1.) UNI-FORM ERECTION TOOL / UNIVERSAL F. C. CO. - CHICAGO ILL. - - 14" heavy duty combination tool for ???. First one I have seen. Some hammer dings.
(2.) AKRON BRASS MFG CO. - WOOSTER, O. / PAT. Feb 24. 1925 - NO. 45 - - 10.75" fireman's combination tool. Patented by Cassius M. Clay Baird of Chicago, ILL. Good++.  PAT.
(3.) Unmarked - - 5.5" cast open end with a two peg spanner. This type of wrench usually came with beer dispensing equipment. Excellent.
(4.) K4 (Dille & McGuire, Richmond, Indiana) - - 4.5". Small single open end with pointed end. Listed in Simmon's Catalogs for their KeenKutter lawn mowers. Excellent.
(5.) Marked only "5/8" - - 2" tall cast hex socket.

Choice Box 008: Lot of Five Bicycle and Pocket Wrenches
(1.) Unmarked - - 5.5" bicycle wrench.
(2.) BARNES TOOL COMPANY / DROP FORGED STEEL - - 5.5" side adjust nut wrench with indented handle panels. Good++. (S98)
(3.) MOSSBERG A-1 - - 5".
(4.) MOSSBERG A-1 - - 5".
(5.) BOOS TOOL CORP - K.C., MO.- PATENTED - - 6" turn handle to adjust wrench. Serrated top jaw and smooth bottom jaw variation. Patented by Joseph B. and Lyal R. Boos of Kansas City, MO. Good++. (see S381)

Choice Box 009: Lot of Twenty Mostly Flat Steel Wrenches.
Wrenches for Coleman Stoves, Briggs & Stratton Engines, door closers, etc.

PiCs Choice Lots 7 thru 9

Choice Box 010: Lot of Five Ford and Massey Harry Ferguson Plow Wrenches. With ruler markings to measure the plow furrow depth. - - 10.5.
(1.) 180108M1 <MHF> - 11/16 - 1-1/16 (Massey Harry Ferguson) / ruler markings - - 10.5" all markings on shaft variation. Good++. (R2-184)
(2.) 9N17014 FORDCO (script inside a oval) USA and ruler markings / 25 with Moore's "M" in a circle logo - - 10.5". Good+.
(3.) 180108M1 <MHF> - 11/16 - 1-1/16 (Massey Harry Ferguson) / ruler markings - - 10.5" all markings on shaft variation. Good++. (R2-184)
(4.) Ruler markings / M3 - - 10.5". Some pitting.
(5.) Ruler markings / no markings on reverse side - - 10.5". Some pitting.

Choice Box 011: Lot of Five Ford Plow Wrenches. With ruler markings to measure the plow furrow depth. (All are the Ford 9N17014 wrench with different markings on reverse side.)
(1.) Reverse marked 18 with Moore's "M" in a circle logo. Good+.
(2.) Reverse marked 13 with Moore's "M" in a circle logo. Good++.
(3.) Reverse marked 13 with Moore's "M" in a circle logo. Good++.
(4.) Reverse marked 21 with Moore's "M" in a circle logo. Good.
(5.) Reverse marked 29 with Moore's "M" in a circle logo. Good++.

Choice Box 012: Lot of Six Assorted Wrenches, Early Vise-Grip, Tack Hammer, Etc.
(1.) VISE-GRIP - DEWITT, NEB - PAT'D APR. 8, 24 - - 9" Vise-Grip. Probably oldest stamped steel variety with hex headed adjusting bolt and no release lever Some pitting.  PAT.
(2.) Unmarked - - 10" malleable iron tack hammer and tack puller with geometric cutout on handle shaft. Good, uncleaned.
(3.) Marked only: "11" (David Bradley) - - 8" Vandegrift patent malleable cast sliding wedge adjust alligator wrench, smooth jawed nut wrench version. Poor with severe pitting, sliding wedge is missing, spring is broken. (S546)  PAT
(4.) H. D. Smith Perfect Handle - - 6" monkey wrench with wood slab handles. Good+.
(5.) H. D. Smith Perfect Handle - - 8" Crescent type adjustable wrench with wood slab handles. Teeth on adjusting jaw are stripped, dings.
(6.) H. D. Smith Perfect Handle - - 6" monkey wrench with wood slab handles. Good with dings, light pitting.

PiCs Choice Lots 10 thru 12

Choice Box 013: Lot of Seven Trimo Heavy Duty Nut Wrenches.
Mfg. by Trimont Mfg. Co. of Roxbury, Mass. and patented by John H. Vinton of Boston, Mass.  PAT.
(1.) TRIMO / SIZE 18" - PAT'D 12-19-11 - - 18" all metal nut wrench with the washer type nut guard. Good++.
(2.) TRIMO / SIZE 15" - PAT'D 12-19-11 - - 15" all metal nut wrench with the washer type nut guard. Good++.
(3.) TRIMO / SIZE 12" - PAT'D 12-19-11 - - 12" all metal nut wrench with the washer type nut guard. Good+.
(4.) TRIMO / SIZE 10" - PAT'D 12-19-11 - - 10" all metal nut wrench with the washer type nut guard. Good++.
(5.) TRIMO / SIZE 6" - PAT'D 12-19-11 - - 6" all metal nut wrench with the washer type nut guard. Good+.
(6.) TRIMO / SIZE 6" - PAT'D 12-19-11 - - 6" all metal nut wrench with the washer type nut guard. Good++ with stamped owner's ID "G10" .
(7.) TRIMO / SIZE 12" - - 12" nut wrench with slab type wooden handle and washer type nut guard. Good+, some chips on handle slabs.

Choice Box 014: Lot of Seven Adjustable Wrenches, Etc.
(1.) 10" MADE BY THE LAWSON MFG. CO. - CLEVELAND, OHIO / PAT DEC 4-20 - OTHER PAT PEND. - - 10". screw adjust pipe wrench. Good+ with punched owner's initials "PE". (S609)  PAT.
(2.) 11 INCH CANADA - - 11" automotive type adjustable. able nut wrench.
(3.) LAKE SUPERIOR WRENCH CO. / SAULT STE MARIE, MICHIGAN - PAT. APPL'D FOR. - - 13" self adjusting nut and pipe wrench, early example with Patent Appl'd For Markings. Patented 9-7-1909 by William Hilliard Munro of Sault Ste. Marie, Ontario, Canada and 10-4-1910 by John Boulieu of Sault Ste. Marie, Mich. Good++. (S362)  PAT
(4.) W. L. DAVY PUMP CORP. M-90-B - M-90-A / ROCKFORD, ILL. - - 12" windmill pump rod plier wrench more commonly seen marked "Love Pump"
(5.) DUDLY TOOL CO - MEMOMINEE, MICH. - PAT. AUG, DEC, 1901- - 12" all metal double jaw adjustable automotive type nut and alligator pipe wrench. Design patents were issued to Albert Dudly of Menominee, Michigan on AUG, 6, 1901 and DEC. 10, 1901. Good with some dents, dings and adjusting knurl has a couple striped threads. (S57)  PAT.  and  PAT.
(6.) MARQUETTE BT-1 - BT-2 BT-3 - PATENTED 6-1-26 - ST. PAUL, MINN - - 12" battery terminal puller. Patented by Gustaf Skoglund and Andrew Olson of Minneapolis, Minn. Good++. (S87)  PAT.
(7.) LARCO - PAT-9-21 (with a "W" logo) - LARCO WRENCH & MFG. CO. - CHICAGO - - 13" all metal screw adjust pipe wrench. Marking variation.. Good+. (S608)  PAT

PiCs Choice Lots 13 and 14

Choice Box 015: Lot of Six Quick and Self Adjusting Wrenches
(1.) 14" HELLER MASTERENCH - PATENTED (with horse logo) - - 15.5" self adjusting wrench. Square hang hole and serrated jaws variation. Excellent.  PAT
(2.) ONEHANDER - 12" / CHROMAVAN - MADE IN GERMANY - - 12" self adjust wrench. Serrated jaws variant. Excellent.
(3.) ONEHANDER - 10" / CHROMAVAN - MADE IN GERMANY - - 10" self adjust wrench. Serrated jaws variant. Good++ except for a small cutout groove on handle shaft edge.
(4.) 8" MASTERENCH - HELLER BROTHERS C0, - NEWARK, N. J. - PATENTED (with horse logo) - - 8" self adjusting wrench. Round hang hole and smooth jaws variation. Excellent.  PAT
(5.) GELLMAN MFG. CO - ROCK ISLAND, ILL - POLLY / 12 INCH - NO. 121 - PATENTED APR. 17, 1923 - - 12" quick adjusting wrench. External spring variation. Good++.  PAT
(6.) GELLMAN WRENCH CORPORATION - CHICAGO, ILLINOIS - / 9 INCH - NO. 91 - PATENTS PENDING - - 12" quick adjusting wrench. Internal spring variation. Good++.  PAT

Choice Box 016: Lot of Five Screw Adjust Wrenches
(1.) WESTCOTT - KEYSTONE MFG. / 6 INCH NO. 76 - BUFFALO NY USA - - 6" S-handled Crescent type wrench. Good+.
(2.) B & C (Bemis & Call) / 6 IN - - 6" curved handle Crescent type wrench, open handle variant. Good+ with a lip chip.
(3.) WESTCOTT - THE KEYSTONE MFG. CO. / THE KEYSTONE MFG. CO.- 8 INCH NO. 78 - BUFFALO, NY USA - - 8" Curved handle Crescent type adjustable nut wrench, closed handle variant. Good+.
(4.) PAT SEPT. 7, 97 - - 5.75" malleable screw adjust nut wrench with cutout slots in body. Mfg. by the Monte Wrench Co. of Shelbyville, Indiana and advertised as the "Monte Pocket Screw Wrench". Good+, jaws are slightly sprung. (S369, C223)  PAT.
(5.) ACME (in a diamond logo) PAT FEB 27, 83 - - 5" pre Whitman & Barnes Acme twist handle wrench. Good+, jaws slightly sprung, weak markings..  PAT

Choice Box 017: Lot of Six Misc. Wrenches
(1.) MOSSBERG STERLING NO. 2 - - 5.5" adjustable bike or pocket wrench.
(2.) BARNES TOOL COMPANY - - 5.5" adjustable bike or pocket wrench.
(3.) MAYTAG - - 5.5" multi-wrench and screwdriver No.6 variation.
(4.) MAYTAG - - 5.5" multi-wrench and screwdriver No.6 variation.
(5.) MAYTAG - - 5.5" multi-wrench and screwdriver No.6 variation.
(6.) Unmarked - - 11" shop made double ended alligator wrench.

Choice Box 018: Lot of Five IHC Farm Wrenches
(1.) 1326E (IHC logo) - 3/8 - 7/16 - - 7" doe.
(2.) IHCO 12335D / F (IHC logo) - - 8" doe.
(3.) IHCO G3525 / F (IHC logo) - -7" doe.
(4.) 1325EA (IHC logo) - - 4.75" doe.
(5.) Z788 (IHC logo) / Z786 - - 8.5" all metal screw adjust nut wrench. Ribbed nut variation. Good++. (R1-256)

PiCs Choice Lots 15 thru 18

Choice Box 019: Lot of Five Lineman's and Duck Bill Pliers.
(1.) KRAUETER 1480-9 - - 8" lineman's pliers.
(2.) UTICA D259-8 / BELL SYSTEM - - 8.75" lineman's pliers with insulated grips.
(3.) KRAUETER 1741-6 - - 6" duck bill pliers
(4.) CANRON - USA - - 6.25" duck bill pliers.
(5.) Unmarked - - 5" duck bill pliers.

Choice Box 020: Lot of Nine Needle Nose, Etc. Pliers
(1.) CHANNELLOCK NO. 3078 - MEADVILLE, PA - - 8" needle nose pliers.
(2.) CRESCENT 1032-6 / BELL SYSTEM - - 6.5" needle nose pliers.
(3.) UTICA KS2827 - - 5" flat nose pliers.
(4.) FORGED STEEL - - 5.5" needle nose pliers.
(5.) FULLER - ENGLAND - DROP FORGED - - 5.5" needle nose pliers.
(6.) VIGO - - 4.75A" round nose pliers.
(7.) UTICA 21 - - 4.5" needle nose pliers.
(8.) UTICA 21 - - 4.5" needle nose pliers.
(9.) UTICA R2291 - W. W. CO. - - 6" pointed nose pliers.

Choice Box 021: Lot of Six Slip Joint Pliers
(1.) Unmarked - - 6.5" slip joint pliers with different type jaws. Good++.
(2.) BRIDGEPORT LINE with a BHM in a diamond logo ((Bridgeport Hardware Mfg. Corp.) - - 7" slip joint pliers with screwdriver end and patterned handle grips. Good++.
(3.) FORGED STEEL PRODUCTS CO. - NEWIARK, NJ / VACUMN GRIP NO. 46 - PAT. 3-8-21- - 6" slip joint pliers with the patented gripping pattern on the handles. Two patents were issued to Earl W. Myers for the grip pastern feature (on Oct. 25, 1921 and Mar. 08, 1921) but only the Oct, 26 patent pattern has been seen. Originally Snap-On sold Forged Steel Products, later they acquired the company and sold them under the Snap-On brand. Good++.
(4.) J. P. DANIELSON CO. - JAMESTOWN, NY - - 5.5" slip joint pliers. Excellent.
(5.) MINNESOTA TOOL CO. - MT. PULASKI, ILL - - 5.5" slip joint pliers. First pliers or any thing I have seen from this company. Good++.
(6.) PROTO (earlier Plomb Tools) 275 - LOS ANGLES - - 5.5" slip joint pliers. Good++.

Choice Box 022: Lot of Six Slip Joint Pliers with Wire Cutters.
(1.) ENDERS NO. 10 with USA in a raised shield logo on each handle - - 7" slip joint pliers with one tapered jaw and screwdriver end
(2.) PAT APPL'D FOR - H. G???? - - 6.5" slip joint pliers with screwdriver end. Has pitting.
(3.) Unmarked - - 7" slip joint pliers with one tapered jaw and screwdriver end.
(4.) CRESCENT TOOL CO, J26 - JAMESTOWN, NY - - 7" slip joint pliers with angled jaws.
(5.) Marked only with an intertwined USA logo - - 7" slip joint pliers with one tapered jaw and screwdriver end.
(6.) FORD (in script) with MCKAIG- Hatch logo - - 6.5"slip joint pliers with screwdriver end from Ford Model "T" toolkit.

PiCs Choice Lots 19 thru 22

Choice Box 023: Lot of Seven Snips, Cutters and Round Nose Pliers
(1.) WISS logo / B. X. CUTTER & STRIPPER - PAT. APP'D FOR - - 7" for BX and armored cable. Excellent.
(2.) J. WISS & SONS - NEWARK, NJ / BX CUTTER - - 6.75" For cutting BX and armored cable, Excellent.
(3.) J. WISS & SONS - NEWARK, NJ / J-7 - - 7" light metal snips. Excellent.
(4.) j. W. WARD - SHEFFIELD - 248 (and a strange logo) / JWW in a circle logo - - 6" small snips.
(5.) KRAUETER 1611-6 - - 6" round nose pliers. Excellent.
(6.) KRAUETER 1611-6 - - 6" round nose pliers.
(7.) P. S. & W. C) (Peck, Stow, & Wilcox Co.) - - 5" round nose pliers.

Choice Box 024: Lot of Seven Automotive Specialty Pliers, Etc.
(1.) WILLARD - - 10.5" battery cable tool. Excellent.
(2.) PAZZANO WRENCH CO. - WALTHAM, MASS. / PAT. NO. 19027 - MADE IN USA - - 8" battery pliers. Patented by Frederick F. Pazzano of Waltham, Mass. on Feb. 21, 1933 and reissued on Dec. 19, 1933. Good++.  PAT
(3.) THOMPSON MFG - CO. MEADVILLE PA - - 9.25" battery tool? with wrench and screwdriver. Some pitting.
(4.) DURBIN DURCO INC. - ST. L. MO. / RING PLIERS - - 6". Excellent.
(5.) CHANNELOCK - CHAMPION DeARMENT- MEADVILE, PA - PAT IN CAN. 1933 - US PAT. 1950362 - - 7.5" early Channelock pliers. US patent granted to Howard H. Manning of Meadville, PA on Mar. 06, 1934. Good++.  PAT
(6.) OTC (Owatonna Tool Co. - Owatonna, Minn.) - - 7.75" hose clamp pliers with locking handle ring. Excellent with plated finish.
(7.) U. D .F. & T. C0 (Utica) - UTICA, NY. - NO. 616 (can't read all of these markings) - - 5.25" special pliers for Steeldraulic brakes used on early Auburn, Buick, Hupmobile, and other automobiles.

Choice Box 025: Lot of Six Specialty Pliers
(1.) C. S. Osbourne. & CO. STEEL - - 6.25" specialty pliers.
(2.) NATIONAL PLIER CO - BUFFALO, NY - PATD NOV 19, 1907 - - 7.25" combination solid joint pliers, cutters and hammer. Patented by Christopher Haeberli of Buffalo, New York. Good+. (S265)  PAT.
(3.) T. & N. - ELMORE, MINN - PAT. 1904 - - 7.75" cast combination pliers, socket wrench, cotter key puller, wire winder, screwdriver, and tack puller claw. Patented by . Erick L. Thompson of Elmore, Minn. on Aug. 23, 1904. Excellent.  PAT.
(4.) Unmarked - - 6.5" cast specialty pliers for Caldwell hose clamps. Patented by John A. Caldwell of Boston, Mass. on May 22, 1877. Excellent.  PAT.
(5.) Unmarked - - 5.25" cast pliers. Looks like the handle for The Little Giant Fruit Jar Holder (see lot No. 300 for a complete example). Excellent.
(6.) Unmarked - - 7.25" combination solid joint pliers, cutters and hammer like ones marked National Plier Co. (see lot CB25-2 above)

Choice Box 026: Lot of Five Wire Crimpers and Fencing Tools
(1.) MADE IN USA BY THE THOMAS & BETTS CO ELIZABETH, N.J. / FOR T & B STA-KON LUG. Etc. - - 9.75" cutter and crimper.
(2.) Unmarked - -7.2" odd crimper? Excellent.
(3.) ) THE NATIONAL TELEPHONE SUPPLY CO CLEVELAND OHIO - DES. PAT. 116,745 / NO. 17-2 NICOPRESS TOOL - - 8" wire connector crimper patented Sept. 19, 1939 BY Frank J. Mayer of Cleveland, Ohio,  PAT
(4.) Unmarked - - 8.5" Cronk type fencing pliers. Excellent/
(5.) KEENKUTTER logo - - 6.5" Cronk style fencing pliers. Excellent.

PiCs Choice Lots 23 thru 26

Choice Box 027: Lot of Five Specialty Pliers
(1.) Marked only FORGED STEEL - - 6.5" solid joint pliers with wire cutters. Good++.
(2.) SNAP-ON - VACUMM GRIP NO. 308 - - 8" battery pliers with the Vacuum Grip handles, Good++.
(3.) HUNT DOSCOBE - - 6" water pump type pliers with strange markings. Good+. (no info found)
(4.) CRONK - - 7.5" solid joint pliers with wire cutters. Unusual to find this type pliers marked Cronk. Good+.
(5.) J-8059 - KMO (Kent-Moore) USA (with Williams "W" in a diamond logo) - - 10" parallel jaw snap ring pliers made by Williams for Kent-Moore. Some pitting. (current price $122.38)

Choice Box 028: Lot of Four Plier Type Tools
(1.) PEXTO (in an oval logo) - P. S. & W. CO. (Peck Stow & Wilcox) - D & H HAND FORGED - - 7" heavy duty pliers with a side wire cutters and a screwdriver end. Good++ with a small hang hole in one handle.
(2.) UTICIA 402-6-1/2 - UTICIA, NY / THB1X A - - Bernard type parallel jaw pliers with a wire cutter. First Bernard type Utica pliers I have seen. Excellent.
(3.) BERNARD'S - MAY, 6, 1890 - JULY 19, 1892 / W. SCHOLLHORN CO. - NEW HAVEN, CONN.- - 5" parallel jaw pliers and wire cutter. Good++.
(4.) ???MG & M. CO. - Brooklyn, NY - MADE IN GERMANY - - 5.25" odd pliers type tool with circular pads for jaws. Good+, not all markings are readable.

Choice Box 029: Lot of Five Adjustable Wrenches
(1.) (USHCO logo) LAWSON - U. S. H. CO. Mfg Co. INC. (U. S. Hame Co.) - Buffalo NY USA / DROP FORGED STEEL - - 12.5" angled head pipe wrench. Patented was issued to Gottfrid C. Lawson of Cleveland on Dec. 14, 1920. Good++. (S609).  PAT
(2.) Unmarked - - 11.5" automotive type adjustable wrench with a tire tool handle. Fair with pitting.
(3.) WRIGHT WRENCH - - 12" all metal rack type quick adjust nut wrench. Poor, pitted, no adjusting jaw spring. (S543, C342)  PAT.
(4.) WIZARD NO. 9 - PAT'D. - MADE IN WORCESTER, MASS. USA (IHC No.?) - - 9" auto type wrench. Good++.  PAT.
(5.) TRADE "TRIMO" MARK - 10" - TRIMONT MFG. CO. - ROXBURY, MASS. / PATENTED 1889 - 90 - - 9.5" early example of Trimont's pipe wrench. Good++, U-type nut guards are missing.  PAT.

Choice Box 030: Lot of Six Adjustable Wrenches
(1.) BILLINGS & SPENCER CO. - HARTFORD, CONN. / C. E. BILLINGS PAT'D FEB. 18TH, 1879 (with ruler markings) - - 7.5" center screw adjust. solid handle variation. Good+.  PAT.
(2.) THE ELGIN - PAT JUNE 8, 97 - EXTRA JAW 25¢ - - 7" adjustable alligator wrench. Patented by Henry Adalbert Smith of Elgin, ILL. Good+.  PAT.
(3.) QUALI-KRAFT / USA PAT. PEND. JAPAN (etc.) - - 8" Peterson helix type quick adjust wrench with 11/16" box end wrench on end of handle. Good ++ with plated finish but hard to adjust.
(4.) BMC MFG. CORP. - BINGHAMTON, NY - PATENT APPL'D FOR - - 7" Locking Pliers. Patented Feb. 19, 1946 by Francis A. Snell of Chenango Forks, NY. Good+. (S278)  PAT.
(5.) PAT PEND. - MODEL 10 - REINHARD MCCABE CO. - MINNEAPOLIS, MINN - - 10" quick adjust plier wrench. Good+. (S713, patent not found)
(6.) HELIX 8 IN PETERSON TOOL CO EL DORADO, KANSAS US PAT 3555939 - - 8.5" helix type quick adjust wrench. Patented by Kenneth Halls of Broomfield, Colorado and assigned to Eugene Peterson. These wrenches were mfg. in El Dorado and Towanda, Kansas. Excellent condition with black finish.and unlike most I have seen the adjustment actually works!  PAT.

PiCs Choice Lots 27 thru 30

Choice Box 031: Lot of Seven Self Adjust Wrenches. 14" to 24".
Some may be shop made. Note: Second wrench from the top was patented (for "Improvements in Pipe Tongs or Wrenches".) on May 22, 1883. by Thomas Patton of Cleveland, Ohio May be marked "Pat May 83"  PAT.

PiCs Choice Lot 31

Choice Box 032: Lot of Seven Self Adjust Wrenches.
One with a wooden handle. Several real odd balls in this lot. Some may be shop made. 15" to 22".

PiCs Choice Lot 32

Choice Box 033: Lot of Seven Adjustable Bicycle, Pocket and Auto Wrenches
(1.) Marked only "S. N. T." (owner's ID?) - - 6.75" different center screw adjust nut wrench. Good+ with light pitting.
(2.) THE BILLINGS & SPENCER CO. (with logo) - - 6.5" quality made automotive style adjustable nut wrench. Excellent.
(3.) THE BILLINGS & SPENCER CO. (with logo) - HARTFORD, CONN. USA - E (with ruler markings on shaft) - - 7" B & S's Model "E" center screw adjust nut wrench. Excellent
(4.) THE BILLINGS & SPENCER CO. (with logo) - HARTFORD, CONN. USA / C. E. BILLINGS PAT'D FEB. 18TH, 1879 (with ruler markings on shaft) - - 6.25" center screw adjust nut wrench. Good+ with some minor pitting, some weak markings.  PAT.
(5.) MOSSBERG A-1 - - 5" bike or pocket wrench. Good+, grind marks on upper jaw edge.
(6.) Unmarked - - 4.24" center screw adjust bike or pocket wrench with unusual cast body. Good++.
(7.) GLOBE MFG CO MIDDLETOWN, CONN.(weak markings, not all readable) / (eagle logo) - - 3.75" center screw adjust bike or pocket wrench with a brass knurled adjusting nut. Good+ with minor pitting, weak markings.

Choice Box 034: Lot of Five Bike or Pocket Wrenches, Etc.
(1.) BILLINGS & SPENCER - HARTFORD, CONN. - 97 - - 4.25" Billings' Model 97 hollow sleeve type pocket or bike wrench. Good++. (S119, C69).  PAT.
(2.) BARNES TOOL COMPANY / DROP FORGED STEEL - - 5.5" side adjust nut wrench with indented handle panels. Good++. (S98)
(3.) MOSSBERG STERLING NO. 1 - - 5" bike or pocket wrench. Good.
(4.) Unmarked - - 6" bike or pocket wrench. good++ with plated finish.
(5.) Blades marked SPARKPLUG and DISTRIBUTOR - - 3.5" ignition wrench with two feeler gauges. Good++.

Choice Box 035: Lot of Five Plumber's Tools, Etc.
(1.) 10" MASTERENCH - CHROME VANADIUM / PATENTED (with horse logo) - - 10.5" self adjusting nut wrench. Square hang hole and smooth jaws variation. Excellent.  PAT
(2.) CHICAGO SPEC. MFG. CO. 3024 / MALLEABLE - TAIWAN- - 6" drain strainer wrench. Excellent, like new.
(3.) No. 3011 SLIP & LOCK - NUT WRENCH / CHICAGO SPEC. MFG. CO. - PAT. PEND - - 10" Crescent type adjustable spud wrench with a locking wing nut. Excellent.
(4.) PARKER, Etc. - - 5.5" heavy duty flaring tool.
(5.) WARNOCK / PAT FEB. 18, 1919 - WORCESTER MASS - - 11.5" malleable strap wrench. Patented by Peter Monahan of Paterson, NJ. Also found marked PAT JUNE 5 1900 (see Lot No. 102). Wrench is in Excellent condition with large bold markings but strap is missing. (S139)  PAT

PiCs Choice Lots 33 thru 35

Choice Box 036: Lot of Six adjustable Nut Wrenches
(1.) TRIMO TRADEMARK PATENTED JULY 19 - 04 / TRIMONT MFG. CO. - ROXBURY, MASS. - - 9" adjustable nut wrench with slotted jaw shaft. Poor, pitted.  PAT
(2.) COLLINS & CO - HARTFORD U.S.A. - PAT OCT 10, 1865 - REISSUE Feb. 25, 1873 - - 10" with distinctive hex handle ferrule and extended adjusting screw support plate patented by Leander E. Smith of Southington, Conn. Good++ with weak markings, not all readable. (S384)  PAT.
(3.) TRADEMARK COCHRAN "SPEEDNUT WRENCH" - REG. US PAT. OFF. / PAT'D MAY 2, 1916 - - MADE IN CHICAGO, ILL. USA - - 9" self adjusting nut wrench. Design patented by Walter Taylor of Chicago. Good++ with most of the original black finish. (S320m, C96)  PAT
(4.) WIZARD NO. 9 - PAT'D NOV 14, 1922 - MADE IN WORCESTER, MASS. USA. - - 9". Good+.  PAT.
(5.) BOOS TOOL CORP - K.C., MO.- PAT. PEND. - - 6" turn handle to adjust wrench. Serrated top jaw and smooth bottom jaw variation. Patented by Joseph B. and Lyal R. Boos of Kansas City, MO. Good+. (see S381)  PAT
(6.) Unmarked - - 4" center screw adjust nut wrench with skeleton handle and brass adjusting nut. Advertised in 1897 by Peck, Stow & Wilcox as the "Star Bicycle Wrench". Good++. (S104)

Choice Box 037: Lot of Five Locking Pliers, Etc.
(1.) PLI-WRENCH - PAT. PEND. - - 9.25" locking pliers with curved lower jaw with pivoting insert that resembles a pelican's bill. Usually found marked Whale Tool Corp. Patent was issued to Ernest St. Laurence of Minneapolis, MN on Nov. 22, 1949. Good+, not cleaned. (S275T)  PAT.
(2.) PLI-WRENCH - PAT. PEND. - - 9.25" locking pliers like Lot 37-2 above. Good++, not cleaned. (S275T)  PAT.
(3.) LIGHTNING WRENCH MADE BY HAMPTON MACHINE & TOOL CO. - - 9.5" adjustable pliers type wrench with screwdriver on end. Good+ with usual weak markings. (S690)
(4.) Unmarked - - 7.25" different pruning shears? good++.
(5.) SEYMOUR SMITH SNAP-LOCK - PATENTS PENDING / SEYMOUR SMITH & SON OAKVILLE, CONN. USA - - 7" Vise Grip type with lower pivoting jaw, release lever and jaw opening measurement markings. Patented by Justin Smith of Watertown, Conn. and Leif Eriksen of Oslo, Norway, May 27, 1952. Good++.  PAT.

Choice Box 038: Lot Three Baxter's "S" Model Double Ended Wrenches
Patented Dec. 01, 1868 by William Baxter of Newark, New Jersey.  PAT.
(1.) Unmarked - - 10". Fair, dings, light pitting.
(2.) Marked only BAXTER'S - - 8". Good++.
(3.) Unmarked - - 6". Good+ with light pitting.

PiCs Choice Lots 36 thru 38

Choice Box 039: Lot of Six Misc. Wrenches
(1.) No. 5 DRESSER / N-5-D - PATENT N0. 1798194 - - 11" reversible ratchet wrench patented by John H. Dodge of Worcester, Mass. on Mar. 31, 1931. Excellent.  PAT.
(2.) FRANK MOSSBERG CO. NO. 350 - PAT. NOV. 11, 1913 - - 10". 3/4" Square female drive reversible ratchet. Good+.  PAT.
(3.) 6" - MADE IN GERMANY - - 6" Crescent type adjustable wrench with hex box end opening on the end. Excellent.
(4.) SWAGELOCK - CRAWFORD FITTINGS CO. - CLEVELAND 10, OHIO - 11/16 - 9/16 / CAM-LOC - PAT. No. 2550010 - - 9.5" Ratching double ended wrench using rollers to ratchet. Patented by Alfred Kavalar of Detroit, MIch. on Apr. 24, 1951 Good++.  PAT
(5.) ELECTRICAN'S UTILITY TOOL NO. 2000 - - 8" multi-tool for conduct fittings. Usually seen marked "Appleton Fittings Utility Tool". Excellent.
(6.) Roller ratchet wrench like Lot CB38-4 above but marked UTICA CAM LOC and CRAWFORD FITTINGS CO. - SOLON, OHIO - - 8". 9/16" end has been cut off.

Choice Box 040: Lot of Four Bicycle or Pocket wrenches
(1.) MOSSBERG STERLING No. 1 - - 5". Good++.
(2.) B-1 (with two Mossberg logos) - - Good++.
(3.) BILLINGS & SPENCER - HARTFORD, CONN. - 97 / PATENTED SEP 29, 1896 - - 4.25" Billings' Model 97 hollow sleeve type pocket or bike wrench. Scarce marking variation with the patent date on reverse side. Good++. (S119, C69).  PAT.
(4.) MOSSBERG A-1 - - 5". Good+.

Choice Box 041: Lot of Three. Wrench Parts, Etc.
(1.) Long adjusting sleeve (four ring) for Bemis &: Call type adjustable wrenches. - 3.5"
(2.) Handle nut for wooden handle monkey wrench. These cost around $35.00 if you have them made.
(3.) Square nut socket for a brace.

Choice Box 042: Lot of Three Automotive and Motorcycle Tools
(1.) NASH No. 1 - - 5" double open ended Nash tool kit wrench.
(2.) TRIUMPH / NA44 - - 5.5" double open ended wrench.
(3.) VG3 - WALDEN WORECESTER - USA - - 4" valve grinder.

Choice Box 043: Lot of Four Curved Handled Crescent type Wrenches
(1.) WESTCOTT / 1O INCH No. 80 - - 10". Poor, knurled adjusting gear is stripped, jaws are stuck, scratched owner's ID "MJS".
(2.) WESTCOTT / 8 INCH No. 78 - - 8". Good++.
(3.) WESTCOTT / 6 INCH No. 76 - - 6". Good+.
(4.) 8 IN / CHARLES E. HALL CO. - BUFFALO, NY USA - - 8" curved handled Crescent type. This is the only the second Crescent type wrench I have listed from the Charles E. Hall Co. which was purchased by Barcalo Mfg. Co. in 1914. Good+ with some weak markings. (see Cope pg 153)

PiCs Choice Lots 39 thru 43

Choice Box 044: Lot of Five Alligator Wrenches
(1.) AM SAW CO. (American Saw Co - Trenton, NJ) - ALLIGATOR WRENCH - PAT AUG. 3, 1897 - - 5.5" single ended alligator wrench. Design patent was granted to Samuel T. Freas 0f Trenton, N. J. Good++.  PAT.
(2.) SAXON - THE K & B CO. NEW HAVEN, CT (The Kilborn & Bishop Co.) - - 8" double ended alligator wrench with threading dies. Good+.
(3.) No. 3 - - 15.75" single ended alligator wrench. Good+ with a couple damaged jaw teeth.
(4.) SANTA FE - - 15.5" single ended alligator wrench. Good++ with some minor jaw teeth damage.
(5.) No. 3 / (Williams "W" in a diamond logo) - - 15". Painted black, pitting.

Choice Box 045: Lot of Four Bemis & call Curved Handle Crescent Type Adjustable Wrenches
(1.) BEMIS & CALL - 12 in. 48 - - 12" with solid handle. Good+, adjusting knurled gear is stripped.
(2.) B & C - 10 in. - - 10" with open handle. Good++.
(3.) BEMIS & CALL - 8 in. 48A - - 8" with solid handle. Good.
(4.) B & C - 6 in. - - 6" with open handle. Good++.

Choice Box 046: Lot of Six Alligator Wrenches
(1.) V & B (Vaughan & Bushnell Mfg. Co. - Chicago, ILL) - 1 - - 4.5" double ended alligator wrench. Pitted.
(2.) Unmarked - - 5.5" steel, single ended alligator wrench. Fair.
(3.) W & B Co. logo (Whitman & Barnes) / 1 - - 5" flat steel single ended alligator wrench Good+.
(4.) Unmarked - - 5.5" alligator by open end steel wrench. Good.
(5.) Marked only "C K" - - 5.5" alligator by open end steel wrench. Good.
(6.) THE ELGIN - PAT JUNE 8, 97 - EXTRA JAW 25¢ - - 7" adjustable alligator wrench with die holder notch. Good+.  PAT.

PiCs Choice Lots 44 thru 46

Choice Box 047: Lot of Six Farm Wrenches
(1.) 1E - 2E / T (IHC and McD logos) (IHC part 4E) - - 9" solid handle variation. Good++.
(2.) IH CO 12335D / F (IHC logo) - - 8" doe.
(3.) M231 (IHC) - - 6.75" pitman wrench. Open back, solid bar variation. Panted, some pitting.
(4.) M58 (orphan) - - 5.75". Painted.
(5.) JD50 (Deere) - - 6" flat steel. Pitted.
(6.) VANBRUNT / D380 with JD logo - - 7". Pitted.

Choice Box 048: Lot of Six Farm Wrenches
(1.) Unmarked - - 9" farmer's "S" style wrench. Pitted.
(2.) THE DELAVAL SEPARATOR CO - NEW YORK USA / 490 - - 7.5". Fair.
(3.) DELAVAL - - 7.75". Fair.
(4.) Y103 (Rock Island Plow Co) - - 7.5" Good (R1-401)
(5.) Unmarked - - 9" farmer's "S" style wrench. Pitted.
(6.) VB624 (IHC) - - 8" binder crank and wrench. Numbers and logo indented variant. Pitted.

Choice Box 049: Lot of Eight Misc. Wrenches
(1.) STANDARD (Standard GARDEN TOOL CO. - Montrose, Iowa) - - 6.5" with a small hammer head, side opening variant Good+ (R1-435)
(2.) No. 11 SIMPLEX RATCHET - CHROME VANADIUM - SAE / FASTNUT LICENSE - PAT. JAN. 1, 1924 - OTHER PATENTS PENDING - SIMPLEX WRENCH CO. NY - - 6.75" ratcheting opened double open end wrench. Patent was issued to Walter Herbert Cook - London, England. Good++.    PAT.
(3.) Unmarked (orphan) - - 5.75"
(4.) Unmarked (orphan) - - 4.75". Some pitting.
(5.) WHEATON / 7HW - PATENTED FEB. 5, 1918 - - 7.25" wrench handle for fuel bulk transfer tanks. Patented by Abram W. Wheaton of Newark, NJ Good++.  PAT.
(6.) Unmarked (orphan) - - 4,25". Excellent.
(7.) VISSERING & CO CHICAGO / AIR NOZZLE WRENCH - - 6.5" tee wrench and chisel type hammer.
(8.) Unmarked - - 5.5" cast open end by square spanner pegs. Style used for beer keg tappers. Excellent.

PiCs Choice Lots 47 thru 49

Choice Box 050: Lot of Five Coes Monkey Wrenches
(1.) COES WRENCH CO. / MFD UNDER L. COES PAT'S - STEEL (Marked like HP58 but with wood knife type handle instead of all steel). Good++.
(2.) W & logo (Whitman & Barnes) J. H. WILLIAMS & CO. WARRANTED - - 12" with wooden knife type handles. Good+ with mushrooming.
(3.) L. COES & CO WORCESTER, MASS / L. COES PAT'D JUNE 26, 1866 - MAR 23, 1869 (both are George Taft patents) - - 12" First model Loring Coes produced after the breakup of L. & A. G. Coes. Good+ with handle crack secured with wire. (HP26)
(4.) COES WRENCH CO - WORCESTER, MASS / L. COES PATD. JULY 6, 1880 - JULY 8, 1884 - - 12" with wooden knife type handles. Good+ with some grind marks. (HP45)
(5.) COES WRENCH CO - WORCESTER, MASS / MECHANICS WRENCH IMPROVED - JAN 1, 1882. - - 12"Good++ with excellent wood handle. (HP46)

Choice Box 051: Lot of Six Coes Monkey Wrenches
(1.) COES WRENCH CO. - WORCESTER - USA / MADE IN USA UNDER L. COES PAT'S - STEEL - - 6" with wooden knife handles. Good+ with some minor dings, grind marks. (HP53)
(2.) L. COES PAT'D DEC 15, 1891 - APR. 30, 1895 - - 6" knife handle with handle ferrule spur extensions. Tight handle crack, some dings. (HP50)
(3.) COES WRENCH CO - WORCESTER, MASS / L. COES PATD. JULY 6, 1880 - JULY 8, 1884 - - 8" with wooden knife type handles. Good, handle crack. (HP45)
(4.) A. G. COES & CO. WORCESTER, MASS / PAT'D - DEC 26, 71 (steam engine governor logo) - - -8" Coes wooden handled jog bar monkey wrench. Good+. (Unlisted marking variant with front marked like HP21 and back marked like the front of HP20)
(5.) COES WRENCH CO - WORCESTER, MASS / L. COES PATD. JULY 6, 1880 - JULY 8, 1884 - - 8" with wooden knife type handles. Good+. (HP45)
(6.) COES WRENCH CO - WORCESTER, MASS / L. COES PATD. JULY 6, 1880 - JULY 8, 1884 - - 10" with wooden knife type handles. Good+ with some damage on top jaw edge. (HP45)

Choice Box 052: Lot of Five Coes or Coes Type Monkey Wrenches
(1.) Can't read markings - 12" Coes or Coes type monkey wrench. Good, handle crack.
(2.) Can't read markings - 12" Coes or Coes type monkey wrench. Fair, pitting.
(3.) A. G. COES & CO. - WORCESTER MASS (not all of the markings are readable) / steam engine governor logo with 5-2-1871 and 12-28-1875 patent dates) - - 10" Coes wooden handled jog bar type. Good. (HP22)  PAT. and  PAT.
(4.) L. COES PAT'D DEC 15, 1891 - APR. 30, 1895 - - 6" knife handle with handle ferrule spur extensions. Good+, jaws are sprung. (HP50)
(5.) Can't read markings - - 10" early Coes monkey wrench with a hole in the lower jaw where a plug is normally seen. The few markings that are readable indicate this is either the C. Foster or Ruggles, Nourse, Mason Coes produced only from 1843 to1853. Good, with handle crack, jaws are sprung, stamped with owner's ID "W. H. BEATTY". (HP2 or HP3)  PAT.

PiCs Choice Lots 50 thru 52

Choice Box 053: Lot of Four Coes Monkey Wrenches
(1.) COES WRENCH CO. - WORCESTER, MASS. / L. COES PAT'D DEC 15, 1891 - APR. 30, 1895 - - 15" knife handle with handle ferrule spur extensions. Good with some dings, excellent wooden handle slabs. (HP50)
(2.) A. G. COES & CO. - WORCESTER MASS. / A. G. COES - PAT"D MAR. 6, 1866 - - 10" with two piece locking ferrule. Good+, some weak markings, minor dings. (HP12)  PAT.
(3.) Can't read markings - - 12" with two piece locking ferrule. Good, very weak markings, jaws are sprung, handle crack. (HP11 or HP 12)
(4.) A. G. COES & CO. - WORCESTER, MASS / CHAMPION (IHC) (with steam engine governor logo) - - 12" cica1866 to 1869 wood handled monkey wrench. Good+, weak markings, not all readable, tight handle crack. (HP11)

Choice Box 054: Lot of Four Coes, Etc. Monkey Wrenches
(1.) Unmarked or can't read markings - - 12" Merrick-Springfield type monkey wrench. Poor with pitting, rough handle, replace handle nut. (see HP9)
(2.) Can't read markings - - 12" Briggs's Pattern combination nut and pipe wood handled monkey wrench with hex adjusting nut. Markings not readable, minor dings, stamped owner's ID, wood handle has been replaced with leather washers. (like S576)
(3.) A. G. COES & CO. - WORCESTER MASS / steam engine governor logo with 5-2-1871 and 12-28-1875 patent dates) - - 12" Coes wooden handled jog bar type. Good+, some dings, tight handle crack. (HP22)  PAT. and  PAT.
(4.) COES WRENCH CO. / MFD UNDER L. COES PAT'S - STEEL - - 12" monkey wrench. Good. (Marked like HP58 but with wood knife type handle instead of all steel)

PiCs Choice Lots 53 and 54

Choice Box 055: Lot of Six Farm Implement Type Wrenches

Choice Box 056: Lot of Six Assorted Wrenches

Choice Box 057: Lot of Seven Assorted Wrenches. (Including several oddballs).

PiCs Choice Lots 55 thru 57

Choice Box 058: Lot of Five International Harvester Deering Type Wrenches
(1.) DEERING (large letters) / DEERING (large letters) - - Rusty, not cleaned.
(2.) H911 / (ledger plate logo) - - pitting.
(3.) DEERING (small letters) / (reverse; no markings)
(4.) H911 - X - (with an IHC logo and an "X") / (reverse: no markings)
(5.) H911 / (ledger plate logo) - - Some pitting.

Choice Box 059: Lot of Five International Harvester Deering Type Wrenches
(1.) HE911 (with an IHC logo) / (reverse; no markings) - - Markings on center of the shaft.
(2.) HE911 (with an IHC logo) / (reverse; no markings) - - Markings on center of the shaft.
(3.) HD911 (with an IHC logo) / (reverse; no markings) - - Light pitting.
(4.) HE911 (with an IHC logo) / (reverse; no markings) - - HE911 makings on left end.
(5.) DEERING (large letters) / DEERING (small letters in a shield logo)

Choice Box 060: Lot of Five International Harvester Deering Type Wrenches
(1.) H911 (marked vertically on left end) - (DEERING in a ledge plate logo marked in the center of the shaft). / (reverse: no markings)
(2.) HD911 (with a dot or period and an IHC logo) / (reverse; no markings)
(3.) HD911 (with an IHC logo and a raise dot) / (reverse; no markings)
(4.) HE911 (with a raised dot and a an IHC logo) / (reverse; no markings)
(5.) HE911 (with an IHC logo and a "2") / (reverse; no markings) - -HE911 marked vertically on left end, IHC logo in center.

Choice Box 061: Lot of Five International Harvester Deering Type Wrenches
(1.) DEERING (large letters) / DEERING (small letters in a shield logo)
(2.) DEERING (large letters) / DEERING (large letters)
(3.) H911 / DEERING (in a ledger plate logo)
(4.) DEERING (large letters) / ((reverse; no markings)
(5.) DEERING (in a shield logo) / (reverse; no markings)

PiCs Choice Lots 58 thru 61

Choice Box 062: Lot of Eight Misc. Small Wrenches
(1.) CLEVELAND FAUCET CO. / CLEVELAND FAUCET CO.- - 5.5". The Cleveland Faucet Co. made beer faucets, etc.
(2.) PARKER - - 4". (R1-369)
(3.) MANN BONE CUTTER (F. W. Mann Co. - Milford, Mass.) - - 4.75". Some light pitting. (R1-308)
(4.) GM18 (for hand grist mill?) - - 4.25". (R1-192)
(5.) 113 - - 4.75" doe with peg on one end.
(6.) M58 (orphan) - - 5.75".
(7.) N9 (orphan) - - 5.75". Looks like the more common M58 wrench.
(8.) C F CO (orphan) - - 4". (not in Rathbone)

Choice Box 063: Lot of Seven Misc. Small Wrenches
(1.) 5430 - PLANET JR. - MADE IN THE UNITED STATES OF AMERICA (also on the IHC List) - - 5" stamped steel (R1-380)
(2.) EUREKA (Eureka Mower Co., Utica, NY) - - 4" (R1-169)
(3.) REMINGTON (Ilion, NY)- - 6". Three openings with hang hole variation. (R1-393)
(4.) REMINGTON (Ilion, NY) - - 5.75". Two openings with no hang hole variation. (R2-184)
(5.) 285 (Valle & Kimes, Dayton, Ohio) - - 4.24" .
(6.) 13 (orphan) - - 4.5" oddball with tear drop shaped cutout
(7.) 170 (orphan) - - 4.5".

Choice Box 064: Lot of Seven Misc. Small Wrenches
(1.) Marked only "3" - - 6" Planet Jr. type garden cultivator wrench.
(2.) Unmarked - - 5" little oddball cast wrench.
(3.) E. C. STEARNS & CO. - SYRACUSE, NY - - 4.5" three opening wrench.
(4.) 1893 (Dille & McGuire, Richmond, Indiana) - - 3.75".
(5.) Gormully & Jeffery Mfg. Co. (Chicago, Illinois - early manufacturer of Rambler bicycles) - - 4.75" open end wrench with screwdriver end.
(6.) GRANITE STATE LAWN MOWERS - HINSDALE, NH - - 5.5" flat steel. (R2-117)
(7.) PETER PAUL ELECTRONICS - NEW BRITIAN, CONN. - GP-010 - - 4" flat steel oe by hex box with spanner tips.

PiCs Choice Lots 62 thru 64

Choice Box 065: Lot of Seven Deering / Utility Type Wrenches. 7" to 7.5"
(1.) K & H CO / OTTAWA ILL - G51 - - Jaw missing. (R1-276)
(2.) No markings -- - Paneled sides.
(3.) No markings -- - Flat sides.
(4.) Marked only with a "B" in a diamond logo (Badger Arnholt?)
(5.) D234M (H. V. McKay / Massey-Harris - Sunshine, Australia)
(6.) 7364 (Wm. E. Pratt Mfg. Co. - Chicago, Illinois)
(7.) Marked only "67" (Moline Iron Works - Moline, Illinois)

Choice Box 066: lot of Seven Stove Wrenches, Lid Lifters, Ash Shaker Handles, Etc.
(1.) GENUINE MONARCH (script) - - 12" stove handle?
(2.) TRIUMPH - - 8.5" stove lid lifter.
(3.) CHAM 18 -1884 - - 7" stove ash shaker handle.
(4.) Unmarked - - 8" fancy stove ash shaker handle.
(5.) Unmarked - - 9" stove lid lifter.
(6.) Marked only with a floral design - 9.5" open end wrench and stove lifter?
(7.) MCCLARY / GAS RANGE - - 6.75" open end wrench with curved end.

Choice Box 067: Lot of Eight Gas Bottle and Welding Torch Wrenches.
(1.) NATIONAL (script) - N. W. E. CO. - 927 - - 7".
(2.) NATIONAL (script) - - 9". Cast.
(3.) HARRIS / 28-W - - 7".
(4.) NATL. CYLD. GAS - - 5".
(5.) PREST-O-LITE - - 4" by 4" tee handled socket wrench for early automobile gas lights.
(6.) PURE CARBONIC INC. - - 5.5".
(7.) OXWELD (script) - 92 - - 6".
(8.) HARRIS / 62-W - - 8.75".

PiCs Choice Lots 65 thru 67

Choice Box 068: Lot of Six Specialty Wrenches and Valve Handles
(1.) D-7 NORDSTROM - - 6.25". valve handle. Pitting
(2.) Marked only with a "M" and "I" logo - - 9" bulk fuel tank valve handle.
(3.) Unmarked - - 7" valve handle?
(4.) POWELL / 2-1/2 R - 1-1/2 T - - 9.75" valve wrench or handle?
(5.) CRANE TILTTRAP NO, 3209 - - 9" large open end.
(6.) NYE / P937 / NYE - 1-1/2 and 2 - - 11.5" cast spud wrench. Not cleaned.

Choice Box 069: Lot of Four Lineman's Wrenches
(1.) Klein (with lineman climbing pole logo) - - 13.5" lineman's lag screw wrench. Some edge damage.
(2.) M. KLEIN & SONS / CAT. 3146 - - 13" lineman's lag screw wrench. Excellent.
(3.) M. KLEIN & SONS / CAT. 3146A - - 13" lineman's lag screw wrench. Some hammer dings.
(4.) BELL SYSTEMS - S - - 13" lineman's lag screw wrench. Excellent.

Choice Box 070: Lot of Six John Deere Flat Steel Wrenches
(1.) DEERE / (reverse: no markings) (Deere No. 10006) - - 6.75". (D107)
(2.) DEERE / DEERE (Deere No. 10007) - - 9.25". (D109)
(3.) JD-50 - - 6" reverse markings variant. (D361)
(4.) JD-51 - - 8.5" reverse markings variant. (D364)
(5.) JD-52 - - 8.5" reverse markings variant. (D366)
(6.) JD-53 - - 10.5". (D369).

PiCs Choice Lots 68 thru 70

Choice Box 071: Lot of Six John Deere and Related Companies Wrenches
(1.) K806 (Deere) - - 12.5". Good. (D386)
(2.) D & M (Deere & Mansur) - - 6.5". Good++. (D303)
(3.) A522 (Deere Mansur) - - 7.5". Good+ (D173)
(4.) 31 (Deere, Hart-Carter, Nichols & Shepard and Oliver) - - 8.5" tee socket wrench. Numbered on right variation. Good+. (D5)
(5.) VANBRUNT / reverse side: no markings' - - 7" with stud variation. Fair,. (D281)
(6.) A523 / DEERE MANSUR CO. - - 6". Good++, (D177)

Choice Box 072: Lot of Five Gale Mfg. Co. (Albion, Mich.) Wrenches
(1.) GALE 21 - - 8.75". Good+, some light pitting. (R1-193)
(2.) GALE 26 - - 10". Light to medium pitting. (R1-193)
(3.) GALE 011A - - 9.5" Pitted. (R1-193)
(4.) GALE 22 - - 11.75" Good+. (R1-193)
(5.) GALE - - 11.75" like Gale 22 wrench above but not marked with the part number. Overall medium pitting. (R1-193) \

Choice Box 073: Lot of Five Gale Mfg. Co. (Albion, Mich.) Wrenches
(1.) GALE / DG847 - - 11". Flat steel. Good, with pitting, some grind marks. (R1-193)
(2.) GALE / (reverse side: no markings) - - 8.75". Fair.
(3.) GALE 011 - - 9". (variant without the "A" suffix with only two open ends not shown in Rathbone)
(4.) 11 (Gale) - - 9.25". Good++ (R2-109)
(5.) Gale / DG92 - - 11.5". Excellent. (R1-193)

PiCs Choice Lots 71 thru 73

Choice Box 074: Lot of Five Automobile Tools
(1.) 15525 (orphan) - - 13" odd, cast hubcap wrench. Excellent.
(2.) Marked only with a Vlchek logo - - 8.5". Looks like the E.M.F. / Studebaker hubcap wrenches. Excellent.
(3.) Unmarked (orphan) - - 9.25" odd large opening hubcap wrench? Excellent.
(4.) Marked only with a McKaig-Hatch Logo (Chevrolet?) - - 6.5" slip joint pliers with screwdriver on end of handle. End of one handle broken.
(5.) Marked only with a "M" logo (Manzel?) (Ford Model "A"?) - - 6.5" slip joint pliers with screwdriver on end of handle. Excellent.

Choice Box 075: Lot of Seven Automotive Tools
(1.) TIRE CARRIER WRENCH / 678225 (with a backward "S" and a "B" in a diamond logos (Studebaker Truck wrench) - - 9". Pitted.
(2.) KEN-TOOL - G-30 - - 9.5" universal drain plug wrench with seven sizes. 9.5".
(3.) Unmarked - - 9" Walden type three socket wrench. Socket crack.
(4.) AF310 / "A' in a circle logo (Chevy No. 24334 c.1923) - - 8.5" lug wrench with hammer and pry bar end. Good+.
(5.) J4 / 4 (with a "A" in a circle logo) - - 6.5" Chevrolet spinner type lug wrench. Good++.
(6.) OVERLAND - 100351 - - - 9.25". Tire tool. light pitting, one end is bent down.
(7.) 3Z1179 (with a Herbrand logo) - - 13.25". Ford Model "A" service tool for flywheel cap screws. Good++.

Choice Box 076: Lot of Five Misc. Tools.
(1.) HILLS HOG RINGER - PAT APR 18, 1865 & AUG 27, 1872 - - 7". Excellent but thumb screw is broken.  PAT.  and  PAT.
(2.) Unmarked - - 5.5" odd specialty pliers. Excellent.
(3.) Unmarked - - 3.25" cast ice skate sharpener? Excellent.
(4.) A33 - - 3.5" cast pump jack to hose adapter.
(5.) DASCO 399 - - 7.5" combination tool with hammer, chisel and fencing staple or cotter key puller. good+.

PiCs Choice Lots 74 thru 76

Choice Box 077: Lot of Six After Market Ford Model "T" Combination Wrenches for Hubcaps, Etc.
(1.) Unmarked - - 9". Good++.
(2.) MCKINNON - 2 - - 10". Good++.
(3.) Marked only "F2" - - Good++.
(4.) E E & CO - 21 - - 9.5".Good++.
(5.) 156 (with a "S" in a triangle logo) - - 9.25". Good+.
(6.) Unmarked - - 9.5". Good++.

Choice Box 078: Lot of Five Dogbone Wrenches
(1.) THE HANDEE - PAT APPL'D / MANSFIELD OHIO - 8" dog bone revolving head multi-socket wrench. Longer variant.Good++. (S289)
(2.) STERLING NO. 295 / ("M" in a shield logo) - - 7.75". Looks like the Hinge Door Silo Wrench (see R1-72). Good++.
(3.) STADCO NO. 21 / MALL. IRON - - 7.75". Marking variant. Good++.
(4.) LUCKY 'LEVEN - CHICAGO - PAT. - MAR. 15-21 - - 9" large malleable cast dog bone wrench with eleven wrench openings. Advertised as replacing seven wrenches used on Fords (for hubcaps, sparkplugs, cones, etc.) and manufactured by M. P. Wessling of Chicago. Design patent was issued to Cullen C. Evans of Los Angeles, Calf. on Mar. 15, 1921. Good++.  PAT
(5.) FITS-ALL WRENCH - PATENTED - TYPE D / FITS-ALL WRENCH CO. - PROVIDENCE, R. I. USA - - 6.5". Good++. (S889).

Choice Box 079: Lot of Six Dogbone Wrenches
(1.) DUM-BEL - PATENT - - 9.5". Good++.
(2.) STADCO NO. 21 / MADE IN U.S.A - - 7.75". Marking variant. Good+.
(3.) THE HANDEE / MANSFIELD OHIO - 7" dog bone revolving head multi-socket wrench. Shorter variant. Good++. (S289)
(4.) WEEKEND - - 4.5". Good+.
(5.) PATENT PENDING - MADE IN GERMANY - - 4". Excellent.
(6.) VICTOR - - 4". Excellent with plated finish.

PiCs Choice Lots 77 thru 79

Choice Box 080: Lot of Eight Numbered Only Orphan Buggy Wrenches
(1.) 1410 D - 1-1/8 - - 8.75".
(2.) 450 - - 9".
(3.) 23200C - - 8.5".
(4.) 554 - - 8.5".
(5.) 47 - - 8.75".
(6.) 29 - - 9.5".
(7.) A35 - - 9".
(8.) 110 - - 8".

Choice Box 081: Lot of 9 Buggy Type Wrenches (mostly orphans)
(1.) 1-1/4 - #8 - - 9.25".
(2.) 1 IN - #10 - - 8.25". Hex box end.
(3.) F103 - - 6". Severe pitting.
(4.) 2320B / PAT'D - - 9".
(5.) 2811C - - 6.25".
(6.) 0518? / 1 - (with a "B" in a circle logo) - - 8.5".
(7.) 1036A with a "M" in a shield logo (Pennsylvania Lawn Mower Co.) - - 6.25". (R1-375)
(8.) 2320E - - 8.5".
(9.) 7220E - - 9".

Choice Box 082: Lot of eight Orphan Buggy Wrenches
(1.) 2320E - - 9".
(2.) ?320E / (a "S" in an oval logo) - - 9.5". Pitted.
(3.) 2320C / PAT'D - - 9.5".
(4.) 2320D / PAT'D - - 9.75".
(5.) 7320D (with a "S" in a square logo) - - 8.25".
(6.) 2320? - - 9:. Pitted.
(7.) 7320D - - 8.25".
(8.) 2320D / PAT'D - - 9.75

PiCs Choice Lots 80 thru 82

Choice Box 083: Lot of Seven Buggy Wrenches
(1.) STAVER (STAVER Carriage Co. - Chicago, ILL.) - - 9.5". Weld repair. (R1-438)
(2.) BAYNES 263 (Bayne Carriage Co. - Hamilton, Ontario, Canada) - - 8" Scarce buggy wrench but is severely pitted, all the markings are not readable. (R1-43)
(3.) BAYNES 263 - - 8". Small end is missing. (R1-43)
(4.) Unmarked - - 8.75" with large hex opening. Good+.
(5.) SS75 - - 8.5". Different with three small open ends and a screwdriver tip. Good++.
(6.) Unmarked - - 8.75" with large hex opening. Pitted.
(7.) 730-6E (with Eberhard's "E" in a circle logo) - - 6". Good++.

Choice Box 084: Lot of Eight Buggy Type Wrenches
(1.) 3306C (with a "D" in a square logo) - - 6". Good++.
(2.) Marked with a "D" in a diamond logo / 1 - - 9.25". Some light pitting.
(3.) DICKIE (stamped letters) - - 8.25". Some light pitting, mostly on back side.
(4.) SP1 / N - - 8" spark plug wrench? Good++.
(5.) 7 - - 8.75". Different with two open ends and one hex box. Good++.
(6.) Unmarked - - 8.75" with large hex opening. Good++.
(7.) 635 - - 6". Good++.
(8.) 11 - - 10.75". Good++.

Choice Box 085: Lot of Eight Numbered Only Farm Wrenches
(1.) GRB125 - - 6". Looks identical to a wrench drawing in a Fairbanks-Morse Parts Lists for their Eclipse Gas Engines. Good+.
(2.) H63 (Oliver) - - 6.5" Good++ but does have a small tight jaw corner crack. (R1-361)
(3.) P354 (orphan) - - 8". Good++.
(4.) E16 (Rock Island Plow Co) - - 7.5". Good++ (R1-400)
(5.) B55 (orphan) - - 8". Good. (not listed, no info found)
(6.) G-200? (orphan) - - 7.75". Good+. (not listed, no info found)
(7.) E16 (Rock Island Plow Co) - - 7.5". Good+. (R1-400)
(8.) 44 (Brown-Manly Plow Co. - Malta, Ohio) - - 8.25". with hammer poll. Good+. (R1-66)

PiCs Choice Lots 83 thru 85

Choice Box 086: Lot of Eight Look-A-Like and Orphan Farm Wrenches
(1.) Unmarked (orphan) - - 9.25" oddball. Excellent.
(2.) Unmarked (like New Idea Spreader Co. - Coldwater, Ohio L140 wrench) - - 8.75". Good. (see R1-349)
(3.) Unmarked (orphan) - - 6.5". Thick double open end with two sizes on each end. Good++.
(4.) Unmarked (like Superior Drill Co, A944 wrench ) - - 5.25" by 6.75" tee wrench with square socket with screwdriver a cotter key hook? Good. (see R1-446)
(5.) Unmarked (orphan) - - 6". thick double open end with two sizes on each end and raised center rib. Good++.
(6.) Unmarked (like Oliver and Ohio Rake "X" wrench) - - 8". Pitting.(see R1-361).
(7.) Unmarked (orphan) - - 9.25". Pitting.
(8.) Marked only "1" (same wrench as one marked Tague & Kerlin Wrench / Midland Mfg Co. Tarkio Mo USA - 1) - - 8.5". Good+. (see R1-326)

Choice Box 087: Lot of Seven Numbered Only Farm Wrenches
(1.) A164 (Minnesota Prison Industries - Stillwater, Minn.) - - 8". Good+ with some light pitting. (R1-329)
(2.) Marked only "3" (Kingman Plow Co.?) - - 8". Painted, pitting. (see R1-284)
(3.) HR66 (Rock Island Plow Co) - - 8.5". Good+ with a tiny, tight crack. (R1-400)
(4.) 1185 (Massey-Harris earlier Johnston Harvester) - - 7.25". Good+. (R1-272, R1-311)
(5.) HF (orphan) - - 7". Good++. (R1-211, with no info)
(6.) H4 (with a star logo) (Gale Mfg. co. - Albion, Mich.) - - 7.25". Odd, neat looking wrench. Excellent. (R1-193)
(7.) C55 (orphan) - - 7.5". Good++. (not listed, no info found)

Choice Box 088: Lot of Seven Numbered Only Farm Wrenches
(1.) M627 (Kirlin Plow Co, Kansas City, Missouri & Beattie, Kansas) - - 9". Not in Rathbone but found in a Kirlin Parts Book for Kirlin's Improved Tongue Disc Cultivators. Good+, painted.
(2.) M15 (orphan) - - 7.5" Good, pitting, painted. (not listed, no info)
(3.) YAN (orphan) - - 7.5" S wrench with center hanger hole Good++. (R3-246 with no info)
(4.) GV (orphan) - - 7". Good++. (R1-192 with no info)
(5.) K232 (Kingman Plow Co.) - - 9" Good++ but has a tiny jaw corner crack. (R1-284)
(6.) 1 & 2 (orphan) - - 7". Excellent. (not listed, no info found)
(7.) P123 (Whitman & Barnes) - - 5.5" For Whitman & Barnes High Wheel Lawn Mowers. Good+. (not in Rathbone)

PiCs Choice Lots 86 thru 88

Choice Box 089: Lot of Seven Farm Type Wrenches (mostly orphans)
(1.) P70 ? (orphan) - - 14.75" heavy cast wrench. Pitting, not cleaned. Last digit of number hard to read, may be wrong.
(2.) MD18 (orphan) - - 14.75" extended double socket wrench. first one I have seen. Good++. (not listed, no info found)
(3.) R298 (orphan) - - 10.25". Neat looking wrench. Good++.(not listed, no info found)
(4.) 479 (orphan) - - 7" by 12.25" unusual tee wrench similar to Moline B355 and Madison Plow / Fuller & Johnson 2H33. Good. (not listed, no info)
(5.) 3558 (orphan) - - 8" by 11" open end by open end by square socket tee wrench. Over all medium pitting.
(6.) G1014 (John Deere) - - 10.25". Good+. (D323, R1-131)
(7.) Marked only with a rectangular logo (orphan) - - 10.75". Excellent with a slight bend.

Choice Box 090: Lot of Eight Farm Type Wrenches (several orphans)
(1.) D239 (Rock Island Plow Co.) - - 10". Good++. (R1-400)
(2.) Marked only "M" (orphan) - - 10.75". Rathbone lists a "M" wrench for Kingman Plow Co. but no parts lists picture seen. Good+. (see R1- 284)
(3.) C250 (orphan) - - 11". Good with pitting. (not listed, no info found)
(4.) 7370 (Empire Plow Co. - Cleveland, Ohio) - - 6.5". Good++.
(5.) Unmarked (orphan) - - 6". Good++.
(6.) No. 668 (orphan) - - 7.25 oddball open end by hex socket. Good+.
(7.) R20 (Burch Plow Co, Crestline, Ohio) - - 10" double open ended S-wrench with center ridge. Good+ with light pitting or casting roughness. (R1-71, R2-46)
(8.) NE254 (orphan or Stoddard?) - - 5.5" square socket for a drill brace. May be Stoddard as NE25 2 is a Stoddard wrench number? Good++ (not in Rathbone)

Choice Box 091: Lot of Nine Orphan Wrenches
(1.) I-1 (orphan) - - 7" oddball. Good++. (not listed, no info)
(2.) 369 (orphan) - - 6.5". Gear teeth on one end and open end on the other end, no peg variant. Pitting, painted.
(3.) 369 (orphan) - - 6.5". Gear teeth and peg on one end, open end on the other end variant. Good++.
(4.) M148 (with Eberhard's "E" in a circle logo) (orphan) - - 6.5". Good++.
(5.) Marked only with an "X" - - 6.25" oddball. Good++.
(6.) MF-112-0S (orphan) - - 5.5" Y-shaped oe by oe by square socket. Good++.
(7.) Unmarked (orphan) - - 2" small open end by square socket L-shaped wrench. Excellent.
(8.) Marked only "10" (orphan) - - 6". Pitting.
(9.) VA94 (orphan) - - 6". Good++.

PiCs Choice Lots 89 thru 91

Choice Box 092: Lot of Seven Farm Wrenches
(1.) D304 (Eureka Mower Co. - Utica, NY) - - 9" Good++. (R1-169)
(2.) 35BX (orphan) - - 9.5". Good++. (not listed, no info found)
(3.) Marked only "A" (Cockshutt Plow Co.- Brantiford, Ontario, Canada) - - 11". Excellent. (R1- 106)
(4.) P84 (Emerson later Case T. M. Co., ) - - 7". Good with pitting. (R1-162)
(5.) G99 (David Bradley) - - 8.5". Good++, not cleaned. (R1-126)
(6.) M523 (with a diamond logo) (Massey-Harris) - - 7.75" Scarce wrench, Excellent. (R1-312)
(7.) Y103 (with a "U" logo) (Rock Island Plow Co) - - 7.5" Good+, not cleaned. (R1-401)

Choice Box 093: Lot of Eight Farm Wrenches
(1.) M55 (Stoddard Mfg. Co. - Dayton, Ohio) - - 8.5". Good++. (R1-441)
(2.) 278 (Dowagiac Mfg. Co. - Dowagiac, Mich.) - - 7" with a wing nut wrench opening. Good++. (R1-149)
(3.) H260 (Stoddard Mfg. Co. - Dayton, Ohio) - - 7". Good+. (R2-270)
(4.) HX (orphan) - - 8". Good+ with light pitting. (not listed, no info found)
(5.) H43 (Keystone Farm Machinery - York, Penn.) - also on the IHC List) - - 7.25". Rare wrench, No one has it on the IHC Tool List. Good+, painted. (R1-274)
(6.) XN52 (orphan) - - &.75". Good+. (not listed, no info found)
(7.) H2 (orphan) - - 8". Pitted. (not listed, no info found)
(8.) Unmarked (orphan) - - 9.25" oddball. Good++.

Choice Box 094: Lot of Eight Farm Wrenches
(1.) + A280 - ???? Co. (can't read all the markings) - - 9.75". Good+. (no info found)
(2.) 13 (orphan) - - 8".with hammer poll. Good++. (not listed, no info)
(3.) 841 (Brown Mfg Co. - Zanesville, Ohio) - - 8.25" with hammer poll. Good++, painted. (R3-35)
(4.) P17 (Stoddard) - - 8". Pitting, not cleaned. (R2-270)
(5.) 541T (orphan) - - 7.25" five opening wrench. Good++. (not listed, no info found)
(6.) 41 (orphan) - - 8.25". Excellent. (Rathbone's Supplement lists a No. 41 wrench for Twin Cities but no illustration)
(7.) H46 (Stoddard and Thomas Mfg) - - 6.5". thick with hammer head. Jaw edge chip missing. (R1-254, R1-441)
(8.) M15 (orphan) - - 7" Good++. (not listed, no info)

PiCs Choice Lots 92 thru 94

Choice Box 095: Lot of Seven Misc. Wrenches
(1.) BLEDSOE - TRADEMARK (logo) MINNEAPOLIS / PAT. PENDING - - 10.5" plier wrench with coarse notched jaws. Pat.5-22-917 by Yancy Bledsoe, Bonham, TX. Fair. (S257)  PAT
(2.) 10" MASTERENCH - CHROME VANADIUM / PATENTED (with horse logo) - - 10.5" self adjusting nut wrench. Square hang hole and smooth jaws variation. Good+.  PAT
(3.) AMERICAN SEATING CO. UNIVERSAL DESK / 13986 (Grand Rapids, Mich.) - - 6" soe malleable handle shaft with a steel head. For the old school house desks with folding seats. Excellent, original finish. (R1-16)
(4.) Unmarked (orphan) - - 8" oddball with two small wrench openings and two large openings with stepped upper jaws. An example has been seen marked "Bonney". Good. (not listed, no info)
(5.) Unmarked - - 5.5" single jawed alligator wrench with wrench openings in handle. Pitted.
(6.) VAUGHAN & BUSHNELL MFG. CO. - NO. 1 - - 5.5" single jawed alligator wrench with wrench openings in handle.
(7.) S ? ? (can't read all the markings) - - 7" double jawed alligator wrench.

Choice Box 096: lot of Six Unmarked Oddballs and Orphans (No. 2 is missing the side of one jaw)

PiCs Choice Lots 95 and 96

Choice Box 097: Lot of Seven International Harvester Wrenches
(1.) A - X - F153 (Oliver and Canadian IHC) - - 8.5". Excellent.
(2.) Unmarked (Oliver and IHC No. F153) - - 8.75". Good++.
(3.) N13 (Milwaukee / IHC) - - 8". Numbers indented variant. Good+. (R1-328)
(4.) P1183 (IHC logo) (IHC, earlier Osborne) - - 7.5". Good+.
(5.) DEERING (IHC) - - 7.5" S-wrench with two end openings and two opening on the sides. Good+. (R1-140)
(6.) P11 (Milwaukee Harvester Co., later IHC) - - 9.75". With post, numbers indented variant. Good++.
(7.) DEERING (in a ledger plate logo) - D736 (William Deering later IHC) - - 5.5" pitman wrench. Good+. (R1-139) .

Choice Box 098: Lot of Seven International Harvester Wrenches
(1.) G: 3526 (IHC logo) - - 11.5". All markings raised. Good.
(2.) I. H. CO. 3170 (Type 11 variation) - - 11.5". Excellent.
(3.) (IHC logo) G3170 (Type 22 variation) - - 11.75". Good++.
(4.) P890 - IHC logo - - 7.25". all markings raised and on one side variation. Good++. (R1-254)
(5.) AP595 - IH logo) - - 7.5" Australian International Harvester wrench. Good++. Excellent. (R2-143)
(6.) PO11 (McKenzie Mfg. Co. - La Crosse, Wisc for No. 5 Planter - also on IHC wrench list) - - 7.5". Three openings plus slot variation. Pitting. (R1-254)
(7.) Unmarked (Champion No. R28 - later IHC) - - 8.75". Plain, no markings, no hang hole - RARE variation. Good++.

Choice Box 099: Lot of Seven, Six IHC and One John Deere Wrenches
(1.) U51 (IHC) - - 8.75" Number raised, logo indented variation. Excellent.
(2.) UA51 - (IHC logo) - - 8.75". No Canada on back, all markings indented variation. Good++.
(3.) U50 (IHC logo) - - 8.25". All marking raised. Good+.
(4.) U50 / CANADA - (IH logo) - - 8.25". All markings indented. Good++.
(5.) G51E (Dain / John Deere) - - 8.25". Scarce Deere wrench with the "E" suffix in Excellent condition. (D319, R1-121)
(6.) P349 - (IHC logo) - - 7.5". Numbers and logo raised variant. Good+.
(7.) 578G - - 1.25" IHC grease cup cover.

PiCs Choice Lots 97 thru 99

Choice Box 100: Lot of Five David Bradley Wrenches
(1.) 0566 (David Bradley) - - 13.25" with hook spanner on one end. Good with pitting. (R1-125)
(2.) DAVID BRADLEY MFG WKS / BRADLEY ILL - 105A - - 9.75" with hammer head. Good++. (R1-126)
(3.) BRADLEY CULTIVATOR U12 (David Bradley Mfg. Co. - Bradley, ILL.) - - 9.75". Fair, pitting, hammer damaged. (R1-126)
(4.) E. T. (Emerson-Talcott Co. - Rockford, Ill. - also a David Bradley wrench number) - - 10" Emerson type. Good++. (R1-164).
(5.) 123 (David Bradley) - - 7.5". Open loop handle. Good+. (R1-125)

Choice Box 101: Lot of Eight Farm Wrenches
(1.) C188 - (with an "U" logo) (Rock Island Plow Co.) - - 10.25" with hammer head. Number marked on big end variation. Good++. (R1-400)
(2.) C621 (Appleton) - - 9.75". Good+. (R2-13)
(3.) D798 (Cockshutt Plow Co.) / ("MD" logo) - - 9.25" doe. Good with light pitting. (R1-106)
(4.) C111 (Roderick Lean - Mansfield, Ohio) - - 8". Good+. (R1-294)
(5.) R456 (Walter A. Wood, Hoosick Falls, NY) - - 8.25". Fair, light pitting, grind marks, blurry markings. (R1-494)
(6.) D239 (Rock Island Plow Co.) - - 10". Good+. (R1-400)
(7.) ECONOMY CHIEF (Cream Separator) - - 6". Double open end S-wrench. Good+. (R1-157)
(8.) CONNECTING ROD SCREW / CYLINDER NUT - 95095 (Delco Light) - - 8.25" Good++.

Choice Box 102: Lot of Eight Farm Wrenches
(1.) A375 / "U" logo (Hayes Pump & Planter Co. - Galva - ILL.) - - 3.75" by 5.75" tee wrench. Good+. (R1-227)
(2.) HAYES / A375 (Hayes Pump & Planter Co. - Galva - ILL.) - - 3.75".by 6" tee wrench. Some light pitting. (R1-227)
(3.) LG276 (with a Case Eagle logo) (Case T. M. Co. earlier Emerson-Brantingham) - - 6" by 8.5" Tee socket wrench. Good+.(R1-82,
(4.) HUDSON / G69 with a "M" logo (Hudson Mfg. Co., - Minneapolis, Min.) - - 5.75" garden cultivator wrench. Pitting. (R1-244)
(5.) Marked only "C" (orphan) - - 5". Good++.
(6.) R. S. Co / CD82 (Racine-Sattley - Racine, Wisc.) - - 5.5". Good++. (R2-257)
(7.) M19 (Case T. M. Co. and Emerson-Brantingham) - - 7" Pitman wrench Good+ (R2-52)
(8.) IOWA CREAM SEPARATOR (Waterloo, Iowa) / BIG A LINE logo - - 7.25". Double open end S-wrench. Good+. (R1-259)

PiCs Choice Lots 100 thru 102

Choice Box 103: Lot of Seven Farm Wrenches
(1.) R121 C (orphan) - - - 8.75" Same shape as Iron Age cutout wrench. Good+.
(2.) NS (Cockshutt Plow Co.) - - 10.25". Good+ with pitting. (R1-106, also listed at R1-46 for Belcher & Taylor but not wrench pictured in parts book)
(3.) M183 (Litchfield) - - 10.25" Good (R1-299)
(4.) JAMESWAY - FT. ATKINSON WIS. - ELMIRA NY / MINNEAPOLIS MINN. - 1008 - - 7.75". Good++. (R1-267)
(5.) 72320E - - 9" buggy wrench. Good++.
(6.) HR67 (Rock Island Plow Co) - - 9". Excellent. (R1-400)
(7.) Unmarked (orphan) - - 9". Good+ with overall medium pitting.

Choice Box 104: Lot of Seven Farm Wrenches
(1.) F239 (Oliver and Canadian IHC-Hamilton Plow) - - 9.5". Good++. (R1-360)
(2.) NE258 (Stoddard Mfg. Co. - Dayton, Ohio) - - 8" Good with pitting. (R1-441)
(3.) LAX PLOW CO - - 9.5". Markings indented variation. Good+ with some light pitting. (R1-289)
(4.) CYLINDER STUD NUT - DELCO-LIGHT / ARMATURE PULL NUT 28282 (with a "D" in a circle logo) - - 8". Good++. (R3-64)
(5.) J H CO / 218 (Johnston Harvester) - - 9.25" Good+. (R1-272)
(6.) G1014 (Deere) - - 10.25" Good with pitting. (D323, R1-131)
(7.) BEMENT (E. Bement's Sons - Lansing, Mich.) - - 8.75". Good. (R1-49)

Choice Box 105: Lot of Eight farm wrenches
(1.) OHIO / CP. 18 (Ohio Cultivator Co. - Bellevue, Ohio?)- - 7" flat steel. First one I have seen with these markings. Good+. (see R1-357)
(2.) COCKSHUTT - - 10" flat steel. Good+, painted (R1-106)
(3.) D.203 (Moline Plow Co.) - - 8.25". Good++ but has a tiny, tight jaw crack. (R1-333)
(4.) R. I. PLOW CO / N124 - - 7.75". Painted, pitting. (R1-400)
(5.) P66 (David Bradley) - - 6.5" Good+ (R1-126)
(6.) P.P.CO / > 100 (with "CH" logo and a raised dot) (Pattee Plow Co - Monmouth, Illinois) - - 7.25". (see R1-373)
(7.) (raised dot) - P. P. CO - - 7.75". Good+. (R1-373)
(8.) P. P. CO. - - 7". Pitted. (R1-373)

Choice Box 106: Lot of Seven Farm Wrenches
(1.) M81 (Minnesota Prison Industries - Stillwater, Minn.) - - 5.25" pitman wrench. Good++. (R3-154)
(2.) 3050A FOR PITMAN (Moline, Adriance) - - 7" Pitman wrench. Good++. (R1-5)
(3.) R20 (Burch Plow Co, Crestline, Ohio variant?) - - 7" by 8.5" combination tee. Pitting, blurry markings. (Rathbone pictures different wrench, see R1-71, R2-46)
(4.) M189 (Acme Harvester Co. - Peoria, ILL.) - - 6.5" pitman wrench. Good+. (R1-4)
(5.) R300 (Walter A. Wood, Hoosick Falls, NY) - - 6". Good+ with some pitting. (R2-300)
(6.) YORK PA (with a diamond logo) (Hench & Dromgold - York, Penn.) - - 7.25" with small hammer head. Good+. (R1-228)
(7.) H & D YORK PA (Hench & Dromgold - York, Penn.) - - 7.25" with small hammer head. Good++. (R1-228)

PiCs Choice Lots 103 thru 106

Choice Box 107: Lot of Seven Farm Wrenches
(1.) ROCK ISLAND / R1122 - - 10.5" Good+. (R1-400)
(2.) Z-300 (Oliver) - - 9.25" Good+. (R1-361)
(3.) 70 TO 83 (Wiard Plow Co. - Batavia, NY) - - 9.5". Good++. (R1-488)
(4.) D1336 (Moline Plow Co.) - - 9.5" with small hammer head Good+. (R1-333)
(5.) G70 (Madison Plow Co. later Fuller & Johnson) - - 7.5". Good++. (R1-305)
(6.) C176 / S (P.P. Mast & Co. - Springfield, Ohio, Later Am. Seeding Mach. Co.) - - 9" with hammer head. Good+, better markings than usually seen. (not pictured in Rathbone, ID from parts list)
(7.) H523 (IHC) - - 8" doe-s variant. Good+. (R1-253)

Choice Box 108: Lot of Seven Farm Wrenches, Etc.
(1.) JWB (Collin's Plow Co's J. W. B. Walking Cultivator, Etc. - Quincy, Illinois) - - 11.75". Good+. (R1-266)
(2.) MUELLER / 51092 - - 11" dbl. hex box. Good+, light pitting. (R1-343)
(3.) WARREN WEBSTER & CO / CAMDEN NJ - - 11.75". Good++. (R1-482)
(4.) WOOD (no markings on reverse side) (Walter A. Wood Mower & Reaping Machine Co. - Hoosick, Falls, NY) - - 11.25" . Good++, no patina. (R1-494)
(5.) HERSCHEL / 9. (R. Herschel Mfg Co Peoria, Illinois) - - 9". Good+, with minor dings. (R2-129)
(6.) 78 (Hart Grain Weigher Co) - - 5.5". Good+. (R3-104)
(7.) C207 / M (Kingman Plow Co.) - - 11" Disc plow wrench with disk straightening slot. Good+ (R1-284)

Choice Box 109: Lot of Six Farm Wrenches
(1.) XX5 (Gehl Bros Mfg. Co. West Wind - Wisc.) - - 13.75". Good++. (R2-112)
(2.) CM-331 (Thomas Mfg. Co. - Springfield, Ohio, later Ohio Cultivator Co. - Bellevue, Ohio) - - 13.75". Three openings variant. light to medium pitting. (R1-357, R1-454)
(3.) J. H. CO / 630 (Johnston Harvester Co. Batavia, NY, later Massey-Harris) - - 13". The Johnston Harvester 630 wrench usually seen is 14.5" long. Good++, indistinct part number. (R1-272)
(4.) marked only "A" (Janesville Machine Co. - Janesville, Wisc.) - - 12.25". Excellent. (not shown in Rathbone but ID from parts list)
(5.) P20 (A. Ellwood Co. - Sycamore, Illinois) - - 13.75" Good+, rusty, not cleaned. (R1-161)
(6.) Marked only D127 (Sterling Mfg. Co. - Sterling Illinois?) - - 14". Not in Rathbone but same wrench number as marked Sterling wrench (see R1-439) Good++.

PiCs Choice Lots 107 thru 109

Choice Box 110: Lot of Eight Farm Wrenches
(1.) N. C. / L (New Casaday - South Bend Chilled Plow Co.) - - 12.5" with hammer head. One open end variant. Painted. (R1-429)
(2.) H523 (McCormick, later IHC) - - 9.25" four openings, straight variant. Good with some pitting. (R3-115)
(3.) M182 (Litchfield Mfg. Co. - Waterloo, Iowa) - - 9". Good++. (R1-299)
(4.) 7338C / Eberhard's "E" in a circle logo - - 8" doe-s wrench. Good+.
(5.) E6 (Roderick Lean - Madison, Ohio) - - 8". Good++. (R1-294)
(6.) 379 / S. B. C. P. CO. (in logo) (South Bend Chilled Plow Co, South Bend, Indiana) / 139 - - 9" with hammer head. Excellent, logo faintly marked as usual. (R1-429)
(7.) FERGUSON - 180-108-M1 (marked on jaws) with ruler markings / 11/16 and 1-1/16 - - 10.5". Excellent. (R1-178)
(8.) B & G PLOW CO / CANTON O. - - 9.75". Good++. (R1-31)

Choice Box 111: Lot of Eight Farm Wrenches
(1.) H90 (orphan) - - 10.25". H90 is also a Noxon cutout wrench number and also a longer different orphan wrench (see Lot 491-1). Good++. (not listed, no info found)
(2.) NEW IMPERIAL OHIO CHILLED (B & G Plow Co. - Canton, Ohio) - - 9.75". Good, painted. (R1-31)
(3.) CTK. MFG. CO. (Chicago Tool Kit Mfg. Co.) / 304 - T - - 8". Good++. (see R1-74, R2-106)
(4.) CTK. MFG. CO. (Chicago Tool Kit Mfg. Co.) / 303B 0- T - - 8.5". Good+. (see R1-74, R2-106)
(5.) ACME / A881 with a star logo. Good with some light pitting. (Acme Harvester Co. - Peoria, ILL.) - - 8.5". (R1-4)
(6.) CM-356 (Thomas Mfg Co. Springfield, Ohio) - - 9". Must be a scarce wrench as it is the first we have had to list. (R1-454)
(7.) M183 (Litchfield Mfg. Co. - Waterloo, Iowa) - - 9.25". Good+. (R1-299)
(8.) 70 TO 83 (Wiard Plow Co. - Batavia, NY) - - 9.5". Good++. (R1-488)

Choice Box 112: Lot of Eight Farm Wrenches
(1.) Crown (Janesville's machine Company's Crown Mower) - - 7.5". Good+. ( R1-119 under Crown Mfg. Co.)
(2.) C (Janesville Machine Co. - later Samson Tractor Co. No. 752425) - - 7" Good++ (R2-256)
(3.) PEORIA / D1003 (Peoria Drill & Seeder Co., Peoria, ILL.) / "W" in a circle logo - - 7.5". Good++ with some original paint?. (R1-376)
(4.) H138 (Cockshutt) Plow Co.) - - 7.5". Good+. (R1-107)
(5.) A404 (Hayes) - - 7". Excellent. (R1-227)
(6.) H & D YORK PA (Hench & Dromgold - York, Penn.) - - 7.25" with small hammer head. Good++. (R1-228)
(7.) N28 (American Harrow Co. - Detroit, Mich. and Windsor, Ontario, Canada) - - 8" with two square cutouts variation. Rathbone attributes a N28 wrench to both the American Harrow Co. and Frost & Wood. Good+. (R1-14, R2-11)
(8.) 95 (Vulcan Plow Co, Evansville, Indiana) with a "B" in an oval logo - - 7.5". Good+. (R1-475)

PiCs Choice Lots 110 thru 112

Choice Box 113: Lot of Six Farm Wrenches
(1.) 1222 (Massey Harris earlier Case Plow Works) - - 10.25". Good+. (R312)
(2.) J. I. C. P. WKS. 359 (Case Plow Works) - - 8.25" Good+, some pitting. (R1-77)
(3.) J. I. CASE PLOW WORKS - 1222 B - - 10.5" Good++ (R1-77)
(4.) J. I. CASE PLOW WORKS / 2234 - - 7.5" Good++, painted. (R1-77)
(5.) 2420A (David Bradley?) - - 9.25". Good with pitting. (not In Rathbone, Gil Irps ID)
(6.) 274A (Massey-Harris, earlier Johnston Harvester) - - 8.5". Good++. (R1-311)

Choice Box 114: Lot of Six Farm Wrenches
(1.) PR40 (Sattley Mfg. Co. - Racine, Wisc. and Moline Plow Co) - - 10.5" with a hammer head. Good+. (R1-333, R1-413)
(2.) T147 (Grand Detour Plow Co.) - - 7.75". Pitting. (R1-205)
(3.) 256 (Hoosier Drill Co., Richmond, Indiana - later American Seeding Machine Co. and IHC) - - 8" with raised numbers. Good++.
(4.) CLARK / "CH" logo (orphan) - - 8". Excellent. (R1-104, with no info)
(5.) KW8 (Rock Island Plow Co) - - 8". Excellent/ (R1-400)
(6.) ROCK ISLAND / R1124 - - 5.75" Good+. (R1-400)

Choice Box 115: Lot of Seven Farm Wrenches
(1.) 397 (Superior Drill Co - Springfield, Ohio, later Am. Seeding Mach. Co.) - - 7". Good++. (R1-446)
(2.) H / H (Badger Cultivator - Council Bluffs, Iowa?) - - 10.75" with a hammer head. Good+, hammer head mushrooming. (R1-37)
(3.) L140 with a "N" in a star logo (New Idea Spreader Co. - Coldwater, Ohio) - - 8.5". Good. (R1-349)
(4.) L299 with Link Belt's dogbone logo (New Idea Spreader Co. - Coldwater, Ohio) - - 8.75". Good+. (R1-349)
(5.) MS15 (Moody & Sons -Terrebonne, Quebec, Canada) - - 8.75" Good+, area with light pitting. (R3-158)
(6.) L298 (New Idea Spreader Co. - Coldwater, Ohio) - - 8". Good+. (R1-349)
(7.) A504 (Gehl Bros. Mfg. Co. - West Bend, Wisc.) - - 10.25". Good+. (R2-112)

PiCs Choice Lots 113 thru 115

Choice Box 116: Lot of Seven Farm Wrenches
(1.) GDP Co / G111 (Grand Detour Plow Co. - Dixon, ILL.) - - 10". Good+. (R1-205)
(2.) 122A (Johnston Harvester, later Massey-Harris) - - 6.5". One rounded and two squared open ends variation. Good++. (R1- 272, R1-311.
(3.) S. B. C. P. CO. (in logo) (South Bend Chilled Plow Co, South Bend, Indiana) - - 9.25" with hammer head. First one I have seen not marked with the part numbers. Good++, logo faintly marked as usual. (R1-429)
(4.) COLLINS PLOW CO / 124 - - 7.5" with a hammer head. Good with some pitting, minor dings. (R1-108)
(5.) ROCK ISLAND / R1123 - - 7.75". Good+. (R1-400)
(6.) R438 (Emerson-Brantingham later Case T. M. Co.) - - 8.5" Good++ with some original paint. (R1-162).
(7.) 106 (Moline Plow Co.) - - 8" Good+. (R1-332)

Choice Box 117: Lot of Seven Farm Wrenches
(1.) 1072 (Sattley Mfg Co) - - 10.5" with a hammer head. Square rather than round opening on big end variation. Good+. (R2-257)
(2.) M.518 (Emerson-Brantingham, later Case T. M. Co.) - - 6.25" pitman wrench. Good+. (R1-162)
(3.) S852 (Acme Harvesting Co. - Peoria, Illinois) - - 6" by 8.25" tee socket wrench. Good+ with weak markings as usually found. (R1-4)
(4.) INDEPENDENT / SP115 (Independent Harvester Co, - Plano, Illinois) - - 7.25". Good+. (R1-247)
(5.) INDEPENDENT / SP117 (Independent Harvester Co, - Plano, Illinois) - - 11" Good++. (R1-247)
(6.) W1795 / E-B logo and a D" & "T" logo (Emerson-Brantingham ) - - 9.75". Good+. (R1-162).
(7.) 178 (J. D. Adams - Indianapolis, Ind.) with dogbone logo - - 6.5". Good++. (R2-2)

Choice Box 118: Lot of Nine Farm Wrenches
(1.) J M CO (Janesville Machine Co.) - - 9.25". Edge hammer damage. (R1-265)
(2.) DE LAVAL / 4126 - - 8". Open end, face spanner and screwdriver (no notches on edge variation). (R1-141)
(3.) G70 (Illinois Malleable Iron Co. logo) (Madison Plow Co. later Fuller & Johnson) - - 7.25". Excellent. (R1-305)
(4.) 140 (Johnston Harvester / Massey-Harris) - - 8.5". Good++.
(5.) T147 - C (Grand Detour Plow Co.) - - 7.75" with hammer poll. Good++ (R1-205)
(6.) 1AA (Brown-Manly Plow Co. - Malta, Ohio) - - 6.5". Good+. (R1-66)
(7.) B573 (American Seeding Machine Co, originally Superior Drill Co. - Springfield, Ohio - also on IHC Tool List) - - 8.5". Excellent. (R1-446, R1-16)
(8.) 4 - SHARPLES SEPARATOR CO / TUBULAR - - 6.75" single open end. Excellent. (R1-422)
(9.) EMERSON - - 10" Good++. (R1-162)

PiCs Choice Lots 116 thru 118

End of cataloged choice box lots. There may be additional unlisted lots



Back To The Wrenching News Homepage



Copyright 2016 by Don 'Bus' Haury
Webmaster - Don 'Bus' Haury Email: