Adjustable Wrenches - Part One (lots 1 thru 110)

0001. FAIRMOUNT U.S.A. 11 IN. - - 11" automotive type adjusting wrench with an unique quick adjust mechanism. First one seen. Excellent. (not listed, info in the June1998 MVWC Newsletter.)

0002. Unmarked - - 11" primitive looking quick adjust nut wrench with a wedge that locks the sliding jaw. Good with some mushrooming, minor pitting.

0003. MOTOR TOOLS CO. - CLEVELAND - PAT'D APR 25, 1911 - - 8.5" odd worm gear adjustable socket wrench with pivoting head. Patent was granted to Herbert R. Palmer of Cleveland, Ohio on Apr. 25, 1911. First one we have had to list. Good+. (not listed)  PAT

0004. Unmarked - - 8" Acme or Hercules twisted handle double jawed nut and pipe wrench. Scarce variation and size of a twist handled wrench. Good+ with straight jaws, a few very minor dings.  PAT

0005. SMITH PIPE WRENCH /No. 1 - PAT 1893. - - 13" self adjust pipe wrench. Patented Mar. 21, 1893 by James A. Smith of Cleavesville, Missouri. Good+ with replaced rivet? (S342).

0006. DENT & CO. - WAUKESHA, WIS. - PAT. NO. 641451 - - 11.75" All metal quick adjust nut wrench. Patent was issued to William T. Hatten of Canyon City, Oregon on Jan. 16, 1900. Patent is the first of two for this wrench advertised as the "Clutch Wrench". The set screw adjustment was added on the second patent but it is on this wrench marked with the first patent number. First one I've seen marled Dent & Co. usually found marked "Clutch Wrench Co / Waukesha, Wisc." or without any markings. Good+, no patina. (see S487)  PAT.

0007. Marked only PATENT PEND. - - 10" quick adjust pipe wrench with odd loop ended adjusting handle. This is the actual wrench pictured in Schulz's book and is the only one I know of. Good+ with some pitting. (S704)

0008. "STAFF" REG. U. S. PAT. OFF. PAT. APPL'D 4-8-19.- - 10.5" hex shaft quick adjust nut wrench with a sliding lower jaw assembly with a knurled locking collar. Paten was granted on April 8, 1919 to Robert A. Rosander of Brooklyn, NY. Made by the Romaro Machine and Tool Corp. of New York. Excellent. (not listed)  PAT

0009. MFG. BY CRESCENT TOOL CO.- CIN'TI. 0 - - 13.75" . Real oddball double headed screw adjust wrench. First one I have seen. Good++. (this actual wrench is No. 146 in Wullweber's last book, no info found)

0010. BONNELL SURE GRIP No. 1 - PATENTED - - 9.25" double jaw nut and pipe wrench with adjusting nut at end of handle. Patented 1-3-1922 by William Leroy Bonnell of Chickasha, Okla. Similar but much rarer than the Shaffer Wrench that was patented 10-26-1909 by Daniel Shaffer of Chattanooga, Oklahoma. Good+, spots of minor corrosion. (similar to S578)  PAT

0011. Marked only PAT. DEC 9, 1930 - - 11" wild combination tool invented by Nathan Jenkins of Chicago, ILL. Over twelve tools including: a hammer, hatchet, vegetable peeler, ruler, saw, file, bottle, jar and can openers, screwdriver, nail or tack puller. The patent papers show a cork screw which evidently was not incorporated in the actual tool. Of all these tools the ruler may be the only one that is useable. Good++ with plated finish.  PAT

0012. Marked only PAT. APLID FOR (Hawes patent) - - 9" wood handled ratchet wrench with adjustable jaws. This is one of the most mechanically appealing of all the collectible wrenches. Patented by James. C. Hawes of Brooklyn, NY on Jan.14,1913. Manufactured by the Convertible Ratchet Wrench Co. of Allentown, Penn. Who boasted it was "the only wrench that could be used in 32 different positions. A rare, quality made tool. Good++. a small spot with minor grind marks. (S319)  PAT

0013. GEDORE VANADIUM - NO. 90 1/2" X 8" / ORIGINAL-GEDORE - NO. 90 1/2" X 8"- - 8.25" comb. Crescent type wrench with an alligator wrench on end. Good++.

0014. UTILITOOL MFG CO - JEFFERSON, WIS - PAT 12-2-13 - - 8.5" comb pivoting head tool with nipper and plier jaws with sc/dr and nail puller on end of handles. Patented. by Henry G. Wernimont, of Washington, DC. Good++. (C311)  PAT.

0015. CRESCENT TOOL CO. / 8-10 CRESCENT - - 10" double ended older type Crescent adjustable wrench with 8" and 10" heads. Good++.

0016. W & B logo (Whitman & Barnes) J. H. WILLIAMS & CO. WARRANTED / "PAGOMA" SHIELD QUALITY (in a shield logo) - - 10" monkey wrench with wooden knife type handles. Pagoma was a brand name for Paxton Gallager Hardware Co of Omaha Nebraska. Good+, crack on one handle slab.,

PiCs Lots 1 thru 16

0017. PAT. OCT 30, 1900 - KIBLER (not all markings are readable) - - 9.25" scarce nut or pipe wrench with an unique sliding handle that has notches that engage in one of three different pins on side of wrench. Patented by John P. Kibler of Eura, Virginia on Oct. 30, 1900. Scarce wrench, only third one I've seen. Good+. (S685)  PAT.

0018. Unmarked - - 10" cast malleable iron screw adjust nut wrench made with only three pieces. Mfg. by the Girard Wrench Mfg Co. of Girard, Penn. and patented. by C. H. Miller of Erie, Penn. on July11, 1892. Good+. (S392)  PAT

0019. Unmarked - - 9" combination screw and quick adjust pipe wrench. Good+ with jaws chip, minor dings. (not listed, no info found)

0020. Unmarked - - 9.25" caliper wrench or vise similar to but slightly different then S484. Good++ (see S484)

0021. "BESTYET" WETMORE MFG CO GALESBURG ILL - PATENT APP'D FOR - - 8" double ended alligator wrench with three adjustable thread dies. Patented 3-10-1908 by Gustavus A. Smith of Marshalltown, Iowa. Poor with pitting, replaced set screw. (S9)  PAT

0022. Gregory Wrench - PAT PEND / GREGORY DESHANE MFG CORP - - 14" self adjusting wrench. Patented by Roy L. Gregory of Everett, Wash. on May 11, 1948. Jurassic predatory bird looking wrench that looks like it should be about 100 years older than it is. Good++. (S672)  PAT

0023. P. S. & W. CO. (Peck, Stow & Wilcox) - PAT JUNE 30, 96 (Wright patent) - - 13" all metal screw adjust pipe wrench with two piece lower jaw assembly. Patented and originally manufactured by Edward Wright and later by Peck, Stow & Wilcox. Fair pitting, weak markings. (S642)  PAT

0024. BONNEY VISE & TOOL WKS - PHILA, PA -THE MASTERPIECE - ESTABLISHED 1876 / PATENTED MAR 3, 1903 - Aug. 9, 1904 - - 15". Wood handled threaded shaft type combination nut and pipe wrench with a pipe cutter attachment. . Scarce large size. Patents granted to Charles S. Bonney of Portsmouth, Ohio and Joseph G. Baker of Philadelphia, PA. Good+, some weak markings. (S567)  PAT.

0025. Unmarked - - 15" rack type quick adjust nut wrench with wooden handle. Patented by Edward A. Cochran of Oak Park, IL on Aug. 23, 1892. Good++. (S552)  PAT.

0026. Unmarked - - 15.5" heavy duty screw adjust nut wrench. Unique wrench, first one seen. Excellent. (not listed, no info found)

0027. Unmarked - - 8.75" screw adjust nut wrench. May be shop made.

0028. PAT MAY 16, 1871 / WARRANTED MALLEABLE IRON - - 10" combination plier type tool consisting of two open end wrenches, buggy type wench, cutter, nippers, screwdriver bit, etc. Rarer version with the buggy type wrench. Patented by George Capewell of Cheshire Conn. Mr. Capewell later founded the Capewell Horse Shoe Nail Company. Good++. Seldom found this complete and in this condition. (S811)  PAT

0029. RUSSELL PAT / OCT. 13 1868 - - 10" cast pliers type nut wrench. Patented by Edwin P. Russell of Manlius, NY. Very early rare wrench in Good++ condition. First one to sell, only second one seen. (not listed)  PAT

0030. "JACK" - PATENTE ANG - - 10" different style quick adjust wrench. Good+, jaw segment chip,. (not listed, no info)

0031. "EAGLE" - FRANK MOSSBERG CO - ATTLEBORO, MASS. / PAT. SEPT. 1, '91 - - 6" adjustable alligator wrench. Hard to find Mossberg wrench. Patented by John Barden of East Providence, Rhode Island. Good++. (S1088C)  PAT.

0032. NO. 14 HEADSON WRENCH / HEADSON TOOL & MFG. CO. - LAFAYETTE, IND - - 12" odd self adjusting pipe wrench. Patented Jul. 12, 1904 by Frank A. Headson of Lafayette, Indiana. Scarce wrench in Good++ condition (S679)  PAT.

PiCs Lots 17 thru 32

0033. BARWICK WRENCH CO. BOSTON - PATENTED JUNE 6, 1871 - 191 - - 12.5" plier type nut and pipe wrench mfg. by the Barwick Wrench Co. of Boston, Mass. and later Billings & Spencer. Patented 6-6-1871 by Wm. Barwick. Good++ with some weak markings. (S855)  PAT.

0034. Unmarked - - 12" self adjust pipe wrench with crude wooden handle slabs. May be a shop made prototype? Good+. (not listed, no info found)

0035. IRLAND PIPE WRENCH CO. - BOSTON, MASS USA - PAT JULY 7, SEPT 23, 1903 - OCT 3. 1905" - - 11". Advertised as "The Irland Automatic Pipe Wrench". Uses a spring-loaded lever underneath the handle to open the upper jaw, which closes automatically. Patents were issued to David Irland of Chicago. Good+ with a chipped jaw end. (S681)  PAT.

0036. Boston Wrench / Patent Dec 5, 1876 - - 10" center screw adjust nut and pipe wrench with open loop shears type handle and serrated jaws. Patented by Daniel C. Stillson of Somerville, Mass/ (inventor of the Stillson pipe wrench). Good+. (this actual wrench is in Wullweber's book No. 179)  PAT

0037. 8 IN ELLIS / PAT NOV 3, 03 - - 8" Crescent type with a locking, pivoting head. The Nov. 3, 1903 patent has not been found, a panted granted to David R. Ellis of Chicago, Illinois on May 17, 1904 is probably the correct patent. Good++. (S308)  PAT

0038. UTILITY WRENCH CO. LD. NEW YORK NO. 7.C - AUG 13, 1878, SEPT 4, 1883 / DROP FORGED FROM BAR STEEL - - 12.5" all metal quick adjust nut wrench with ultra fine rack teeth. These wrenches are among the top in the old wrench field in both quality of materials and workmanship. The all metal Utility Wrenches are quite a bit scarcer than those with wood handles. Pat. by Henry W. Atwater of Newton, Mass. Good++. (all metal version not in Schulz. see S541 for wooden handled version.)  PAT

0039. 10 - MARTOR TOOL - GERMANY - - 912" Stillson type pipe wrench with a tightening/release lever. Similar to the Eagle Grip pipe wrench (see Lot 40 below). This is the actual wrench pictured in Schulz's book. Good++ with plated finish. (S772)

0040. 18 - MID-AMERICA PRODUCTS, INC. - EAGLE GRIP - PATENT NO. 2691317 - OMAHA, NEBR. / 1/4" TO 2' PIPE - - 18" Stillson type pipe wrench with a novel jaw tightening lever. Patent was issued to Ernest T. Olson of Oshkosh, Nebraska on 10-12-1954. Scarce larger size. Some spots of corrosion. (S598)  PAT.

0041. LURIE & LURIE 18 - GRIP - - 18.5" unusual massive all metal pipe wrench adjusted with a threaded rod with knurled knob between the jaws. Has rotating jaw inserts and pivoting head. RARE - Only the second one we have had to sell. Good+. (S691)

0042. E. WRIGHT PAT'D JUNE 30, 96 - - 10" all metal screw adjust pipe wrench with two piece lower jaw Top jaw has replaceable serrated insert. Patented and mfg. by Edward Wright (later by Peck, Stow & Wilcox). Good+ with dings on one side of the lower jaw assembly. (S642)  PAT.

0043. SUTERLAND (sic) WRENCH CO. - CHICAGO, ILL. / DROP FLORGED - PAT'ED FEB 14, 1922 - - 18.25" odd self adjust pipe wrench. Patented by Harry C. Sutherland of Oak Park, Illinois. Rare, first one we have had to sell. Good+ with a few edge dings. (not listed)  PAT.

0044. PAT. APPLD. FOR - J. C. BAKER / .10. 16, 1938 - - 17.5" rack type quick adjust wrench with a tightening/release lever. Because of the stamped markings and overall design of this wrench it may be a shop made prototype? Excellent. (S697, no info or patent found)

0045. TRADEMARK WRIGHT WRENCH .(with logo) - - TACKOMA, WASH. - MADE IN USA - - 14.5" rack type quick adjust nut wrench. Patented by James F. Wright of Philadelphia, Penn. on Jan. 26, 1909. Good+. (S543, C342)  PAT.

0046. Unmarked - - 16" novel screw adjust nut wrench. May be a shop made prototype? First one seen. Good++. (not listed, no info found)

PiCs Lots 33 thru 46

0047. E. L. LOOMIS / E. L. LOOMIS - - Unique screw adjust wood handled pipe wrench. First one I have seen. Patent granted to Edward A. Cochran of Oak Park, IL on Aug. 23, 1892. Good++ with a minor jaw chip. (C139)  PAT.

0048. SAMSON - PAT''D APR. 13, 1883 / PAT''D MAR. 6, 1883 - - 12." early self adjusting nut wrench with a wood handle. Advertised as the "Samson Self Adjusting Wrench". Mfg by Lowentraut Mfg Co, Newark New Jersey and patented by J. W. Calef. Good++, minor dings. (S323)  PAT. and  PAT.

0049. GIFFORD PAT'D JUNE 13, 99 - - 13.25" screw adjust strap wrench. Patent was granted to Jireih C. Gifford of Cambridge, Mass. Good++. (S628)  PAT

0050. THE HAMMOND MFG. CO. BOSTON, MASS USA / PATENTED APRIL 3. 1900 - - 12.5" quick adjust rack type wrench with a lever that releases the upper jaw. Patent was issued to Edward Wright of Worcester, Mass. Good++. (S676)  PAT.

0051. 15 INCH - BESSEY - US PAT 2765690 (etc.) / NO. 111-5 - MADE IN W. GERMANY (etc.) - - 15" Crescent type with ratcheting action. Patent issued to Eugen Mayer of Stuttgart, Germany on Oct. 09, 1956. Scarce large size. Good++. (S770)  PAT

0052. Unmarked - - 14.5" odd screw adjust pipe wrench. Good++. (not listed, no info found)

0053. ANDERSON TOOL CO. - PAT. NO. 2878702 / 14 - PATENTED - - 13" Patented March 24, 1959 by Anders Gustav Anderson of Chicago, Illinois. More modern cast body pipe wrench with a slick quick adjustment. Excellent like new. (not listed)  PAT

0054. HAZELTINE & CHANTRELL / PATD. FEB. 28 82 - - 9" tee handled adjustable socket wrench. Patented by Felix Chantrell of Bridgeport, Conn. Good++. (S918, C162)  PAT.

0055. 12" PATD. FEB. 28 82 - - 12" Larger example of the Hazeltine & Chantrell adjustable socket wrench listed in Lot. 54 above. Excellent. (S918, C162)  PAT.

0056. WM. MARPLES & SONS - HIBERNIA - - 12.5". Nice example of an all metal coach wrench with octagon handle from the famous Sheffield, England tool makers. Good++.

0057. No.3 BULLARD WRENCH / PAT OCT. 27, '03 - - 17" large size self adjusting wrench with spring loaded pivoting upper and lower jaws. Mfg. by the Bullard Automatic Wrench Co. of Providence, Rhode Island under patents issued to Frank Bullard of Los Angeles, CA. on July 7,1903. Good++ with a small drilled hang hole. (S659)  PAT.

PiCs Lots 47 thru 57

0058. IMP. ANGLE WRENCH / BLOOMINGTON, ILL - PAT. PEND. - - 9" Crescent type with a button that allows the head to be set at various angles. Mfg. by the Imperial Tool Co. of Bloomington, Indiana and patented by Ransom Bovee of Chicago, Illinois on Nov. 21, 1916. Good+. (S311)  PAT.

0059. IRLAND PIPE WRENCH CO. - BOSTON, MASS USA - PAT JULY 7, SEPT 23, 1903 - OCT 3. 1905" - - 7.5". Advertised as "The Irland Automatic Pipe Wrench". Uses a spring-loaded lever underneath the handle to open the upper jaw, which closes automatically. Patents were issued to David Irland of Chicago. Scarce small size. Good+. (S681)  PAT.

0060. PAT JAN 11, 1876 - JAN 9, 1877 - - 6.5" all metal cast malleable monkey wrench with open loop handle. Patented by O. B. North of New Haven, Conn. Scarce small size. Excellent with most of its original Japan finish. (S373)  PAT. and  PAT.

0061. 8" CYGNET WRENCH / CYGNET MFG. CO. INC. - BUFFALO, NEW YORK - PATENTED - - 8" Crescent type with a pivoting head that allows the jaws to ratchet. Patented by Henry D. Rahling of Buffalo, NY on Oct. 2, 1923. Good+. (S468)  PAT

0062. Marked only PAT. PEND. - - 8.5" sliding disk quick adjust nut wrench. Excellent. (S531, [patent not found)

0063. L. G. AUTOMATIC WRENCH - RED CHIEF MFG. CO. / PAT NOV 16, 1915 - LOUISVILLE, KY. - DROP FORGED STEEL - - 8" self adjusting nut wrench patented by Louis E. Gaisser of Louisville, KY. Good+. (S320B)  PAT

0064. EVANS PAT'D ZIP GRIP - L.A. CALIF. - - 7.5" quick adjust pipe wrench with helical shaft and sliding collar. Patented by Edwin Evans of Venice, California. Good++, adjusts smoothly. (S537)  PAT.

0065. COLLINS & CO - HARTFORD U.S.A. - PAT OCT 10, 1865 - REISSUE Feb. 25, 1873 - also marked SANTA FE ROUTE which is the earliest Santa Fe mark - - 11.75" wood handled monkey wrench with distinctive hex handle ferrule and extended adjusting screw support plate. patented by Leander E. Smith of Southington, Conn. Good with some weak markings. (S384)  PAT.

0066. PRITZLAFF (with logo) - - 10" wood handled monkey wrench from the John Pritzlaff Hardware Co. of Milwaukee, Wisc. Good++, not cleaned.

0067. BEMIS & CALL CO - SRINGFIELD, MASS / A. D. BRIGGS PATENTED APR 28, 1859 - - 12" pipe wrench with threaded shaft and long threaded sleeve. Early pre Civil War patented wrench in exceptional nice condition. (S833)  PAT.

0068. Marked with "M Co" in a star logo. Also stamped JOHN W. SCHURING - JACKSON ST, - EAST DUNDEE ILL. - - 12" screw adjust pipe wrench with a cast body. First one I have seen, Good++. (not listed, no info found)

0069. RICHMOND / RICHMOND - - 12.5" extra heavy duty self adjust cast wrench? Only the second one we have had to sell. (S714, no info, no patent found)

0070. BOOS WRENCH - ROCK ISLAND, ILL. - - 8. A center screw adjusts the sizes of the box end wrenches on each end of the wrench. Similar but somewhat different than The Roosevelt wrench (see S464). Rare wrench. Some pitting, dings. (not listed, patent not found)

0071. GRIP N STIK - 707 DOVER, O - PAT APR 13, 24 - - 7.5". Similar to Eifel Flash Plierench but considerably rarer. Actual patent date is May 13, 1924 and was issued to Karl Potschner of Dover, Ohio. Good++. (S263)  PAT.

0072. BENTON - $2.00 - MADE IN USA - PAT PENDING - - 7". turn the handle for both quick and screw adjust nut wrench. Good++ with excellent plating. (S477)

0073. CRONK ( Cronk and Carrier Co. of Elmira, NY) - - 8.25" quick adjust alligator wrench. with a hex nut wrench on the other end. There are several variations of Cronk wrenches in Schulz's book but I couldn't find this one. Good++. (not listed)

0074. ROOSEVELT ADJUSTABLE WRENCH - PAT. PEND'G - ROOSEVELT MFG CO CHICAGO USA - - 8" A center screw adjusts the sizes of the two box end wrenches. Good with several dings and small grind mark. (S464, patent not found)

0075. Unmarked - - 10" RARE wood handled revolving head four opening nut wrench. Pat. was issued to Edward Phillips of Cleveland, Ohio on Nov. 24, 1885. Good+, few minor dings. (S557)

PiCs Lots 58 thru 75

0076. CARLL - PAT'D MAY 6 -1913 / 10 IN. DROP FORGED STEEL - - 10" Crescent type with reversible jaws for nuts or pipe. Patented by A. B. Carll of Boothwyn, Penn. Excellent. (S568)  PAT

0077. CHAMBERLAIN'S WRENCH / PAT. OCT. 22, 1912 - - 9" combination adjustable nut wrench, pliers, screwdriver, wire cutter and threading die. Patented by John Chamberlain of Bismark, North Dakota. Excellent, die is an Ace brand replacement. (S805)  PAT.

0078. BOARDMAN'S PATENT - TOWER & LYON, NY. - - 7.75" combination tool with a hammer, nail claw, sc/dr, square socket and tool bit holder (in end of handle), and a nut and pipe wrench. 1865 patent by A. W. Park of Norwich, Connecticut and 1866 patent by Bryan Boardman,(also of Norwich) apply. Good++ with some minor dings, has most of the original plating. (S788, C72)  PAT. and  PAT.

0079. G. M. CO. - L. I. CITY, NY. / MADE IN USA - UNBREAKABLE - - 8.5" cast combination quick and screw adjust nut wrench with alligator wrench, hammer, pry bar and nail puller. Design patent was issued to George Iskyan of Jackson Heights, NY on 9-7-1954. Excellent . (S791)  PAT

0080. "STERLING" NO. 50 (with a "M" in a diamond logo) / MANFD BY FRANK MOSSBERG CO - ATTLEBORO, MASS. - PAT. NOV 13, '00 - MAR 11, 'O2 - PAT. APPLIED FOR - - 9.75" like Sterling No. 5 but with oval handle, marked on handle variation. Scarce wrench. Good++, minor jaw edge dings. (S874)

0081. ANY ANGLE WRENCH - PATENT 1916 - LIMA., O. USA / DROP FORGED STEEL - - 8.5" Crescent type adjustable wrench with an adjustable angle head. Mfg. by Atco Wrench Co. and patented by Ramson Bovee 11-21-1916. Excellent, like new, will probably upgrade the one in your collection. (S311)  PAT

0082. BEMIS & CALL CO. - SPRINGFIELD, MASS / No. 3 - - 10" wooden handled pipe wrench with long four ring adjusting sleeve and replaceable lower and upper jaw inserts. Good+ with a chipped jaw insert. (S836)

0083. EVER-READY WRENCH CO - FORT WORTH, TEXAS / DROP FORGED - PATENT APPLIED FOR - - 8" rack type quick adjust nut wrench with a lever release. Pat. Jan 11, 1921 by Otey Kirkpatrick of Fort Worth. Good++. (S491, C131)  PAT

0084. THOS. P. I. MAGOUN / PAT. 16, 72 - - 11.5" early and rare self adjusting nut wrench patented as an "Improvement in Fork-Wrenches" by Daniel Witt of Hubbardston, Mass. and sold by Thomas P. I. Magoun also of Hubbardston. Only second one we have had to sell. Good++. (C210)  PAT.

0085. Z 12 IN / PAT APL'D FOR - 1 - - 12" malleable iron quick adjust with pipe jaws variant. Pat. Oct. 31, 1905 by Frederick Zwicker of Indianapolis, IN. Good++. (S732)  PAT.

0086. Unmarked - - 11" cast multi-tool consisting of tongs, hammer, screwdriver or pry bar, tack claw, etc. Good++. (not listed, no info found)

0087. PAT SEPT 20, 1921 - HANDEHAND - TRADEMARK - MFD. BY H & E WRENCH CO. NEW BEDFORD, MASS.- - 10.25" helical screw quick adjust wrench, hex nut version. Patentees were Edwin J. Evans and George E. Hemphill both of Salt Lake City, Utah. Good++. (S496).  PAT.

0088. EFFICIENCY TOOL CO. - - EFFICIENCY - PAT. APPL'D FOR - - 8" combo pliers, the two halves come apart to use the two open end wrenches on the ends. Patented by Anton Myer of Milwaukee, Wisc. on 1-16-1923. Advertised as a "Five-in-One-Tool. Good++ with at least 50% of the original plating. (S283, C127)  PAT.

0089. LOCK LINE - ROSS MFG CO,. - S. F. - US PATENT 2,370,308 - - 8" cam action pliers with a wire cutter mfg. in San Francisco, Calif. and patented by Abraham Hanson, Monrovia, Calif. on Feb. 27, 1945. Good++. (S267)  PAT.

0090. Unmarked - - 7" pliers multi-tool with a hammer, small hatchet, wire tool and screwdriver. Excellent with original plating. (not listed, no info found)

0091. Unmarked - - 8.5". Early screw adjust nut wrench. The top screw adjustment resembles Robert S. Stenton's ( of Brooklyn, NY) July 24, 1866 patent and a British wrench patented by Joseph Asbury. Good++. (see S416)  PAT.

0092. LARCOLOY - CHICAGO USA / 6" AUTOMATIC - PAT PEND. - - 6.5". Patent was granted to John V. Larson and August Kuring (both of Chicago, ILL.) on Oct. 12, 1926. Good++. (C199, like S320)  PAT

0093. KENTO (in a double arrow logo) / $2.50 - MADE IN THE USA - - 7.5" turn handle to adjust. Like the quick and screw adjust Benton wrench. Excellent, like new with original plating. (not listed)

PiCs Lots 76 thru 93

0094. NEWTON MACHINE Co - NEWTON, MASS. - GUTHRIE'S PAT. 1-13-85 / B1900 - - 8" Stillson Type Wood Handled Pipe Wrench. Patented by James F. Guthrie of Somerville, Mass. Good+, Chipped upper jaw.  PAT.

0095. AIRD TRADING CORPORATION / LUSUL (in script)- GERMANY - - 9.5" ALL METAL QUICK ADJUST NUT WRENCH. Good++. (not listed, no info found)

0096. Unmarked - - 10" Bornstein's patent wood handled nut wrench with patented double screw action for fast adjustment with a locking collar. Advertised as Bornstein's Improved Patent Vise Wrench by American Improved Wrench Co. of Boston, Mass. and patented by Henry Bornstein of Boston, Mass. on Aug. 26, 1890. Good+. (S367)  PAT

0097. (can't read markings) / JAN 9, 1877 (North's patent) - - 8" all metal cast malleable monkey wrench with open loop handle. Patented by O. B. North of New Haven, Conn. Good++ with some blurry markings. (S373)  PAT.  and  PAT.

0098. PAT JAN 11, 1876 / 10 (North's patent) - - 10" all metal cast malleable monkey wrench with open loop handle. Patented by O. B. North of New Haven, Conn. Marking variation with only one patent. Excellent with most of its original Japan finish. (S373)  PAT.  and  PAT.

0099. BOSTON WRENCH CO BOSTON, MASS. - PAT'D OCT 2, 1906 OTHER PAT. PENDING - - 9" all metal quick adjust rack wrench with a sliding lever that locks the lower jaw in position. Patented by Alphage Gagnon of Springfield, Mass. on Oct. 02, 1906. Good+. (S480)  PAT

0100. HARBISON WRENCH PAT'D - JUNE 5, 1900 - KNOXVILLE, TENN - - 12.75" double ended alligator wrench. Patented by Sam Harbison of Knoxville, Tennessee. Good+. (S17)  PAT.

0101. VICTOR TRADEMARK / PAT'D AUG 25, 1903 - - 12" combination screw and rack quick adjust nut wrench. Patented by Clarence Bonner of Cherrypoint, Illinois. Patent is usually seen on the much more common Bonner's Victor pipe wrench. Very rare, Good++ with miner nicks, weak markings not all readable, looks like a new replacement spring. (not in Schulz or Cope)  PAT

0102. Unmarked - - 12.5" unique rack teeth type quick adjust wooden handled wrench. Adjusted with a lever and has a rotating tab to lock the jaws in place. Looks like it's may be a prototype. Never seen another. Excellent (S1083, with no info. Probably the same wrench as this one)

0103. Unmarked (Gates Bolt Wrench) - - 10.25" all metal nut wrench with an unique adjusting screw on top of upper jaw. Patented by Alfonso D. Gates of Cleveland, Ohio and mfg. by the Lorain Wrench Co. of Lorain, Ohio. Good+ with edge dings. (S391)  PAT.

0104. THE NILSON WRENCH NO 12 - - 12" malleable alligator wrench with adjusting sliding upper jaw. Patent granted on Christmas day 1900 by Nils Nilson of Absaraka, North Dakota and mfg. in Casselton , ND. Rare wrench especially in this large size. Good++. (S31, C234)  PAT.

0105. WOLVERINE - PAT JUNE 1, 09 - - 8.5" alligator wrench with a sliding tee handle and a head that rotates 360 degrees. Pat. by John Drake of Decatur, Illinois as a nut wrench. Good+. (S88, C120)  PAT

0106. 8 IN NUT GEARENCH (sic) TRADE MARK - FORGED STEEL - PAT'D 6-1-26 / GEARENCH MFG CO. - HOUSTON TEXAS - - 8." quick adjust wrench patented by Joseph Peterson of College Station, Texas. With the patent date variation. Good++. (S671)  PAT

0107. PATD JUNE 24, 73 (Bradley's patent) - - 8.5" all malleable cast quick adjust nut wrench with a hammer poll. Patented by Byron C. Bradley of Chicago, Illinois. Pitted. (not in Schulz)  PAT.

0108. MADE IN GERMANY - - 9.5" Clyburn type looking wrench but with a wedge that releases or locks the sliding jaw, offset handle. Good++. (like S759)

0109. SHAFFER WRENCH NO / PATENT PENDING - - 9.5" double jaw nut and pipe wrench with adjusting nut at end of handle, Patented 10-26-1909 by Daniel Shaffer of Chattanooga, Oklahoma. Good+. (S578)  PAT.

0110. PAT JUNE 10, 1902 - - 7.75" predatory looking cast plier wrench. A larger size of this wrench has been seen marked "Remington - Pat ". That patent was issued to Charles C. Smith of Bellevue, Idaho. Good+, minor dings, weak markings. (not in Schulz, looks like Wullweber No. 104)  PAT.

PiCs Lots 94 thru 110

Farm Equipment Type Wrenches - Part One (lots 111 thru 199)

0111. BENICIA HANCOCK PLOW - D137 (Benicia Plow Works, Benicia, Calif.) - - 10.75". Looks like Chattanooga D137 wrench. Good++. (R1-50)

0112. BROWNE / SULKY - - 9.75". The Browne Sulky Plow was made by the Madison Plow Works of Ft. Madison, Iowa. Pitting. (R1-340)

0113. G18 (oddball orphan) - - 12". Look similar to the IHC V265A wrench. (see R1-255). Painted. (not listed, no info found)

0114. BLOCKI G69 (F. Blocki Co. - Sheboygan. Wisc.) - - 5.5". Looks like the Hudson G69. Excellent. (R1-57. R1-244)

0115. NEBRASKA MFG CO. / 26 (Lincoln, Neb.) - - 12". Rare impressive looking Nebraska wrench. Pitted. (R1-347)

0116. Unmarked (Whitman & Barnes) - - 12" oddball. Pitting, not cleaned. (R1-487, R1-504)

0117. BAYONNE NO 1 (with C-H logo) - - 13.75". Good++. (R1-43, no info)

0118. WIARD with a star logo - - 13.5". One of the more unusual wrench designs. Good++. (R1-488)

0119. BENICIA HANCOCK PLOW - D138A (Benicia Plow Works, Benicia, Calif.) - - 12.75". Looks like Chattanooga D138 wrench. Good++, with casting flaw on part number. (R1-50)

0120. 1340 (Nichols & Sheppard, Battle Creek, Mich.) - - 13.5" Double open end variant. Good++, not cleaned. (R2-216)

0121. 17 (orphan) - - 13.5 " Large, neat wrench. Good++. (not listed)

0122. BLOUNT / 430 (Blount Plow Works - Evansville, Ind.) - - 10.25". Good+. (R1-58)

0123. SE WEBER - - 7". Real oddball with six openings. Good++. (R1-484, no info)

0124. D4C191 (M. Rumely Co. - La Porte, Ind.) - - 9.5". Excellent. (R3-192)

0125. S D & COE - 21 (Stringer. Dexter & Coe, earlier Munnsville Plow Co. - Stockbridge, NY) - - 8.75". With part number variant. Good+. (R1-408, R2-210)

0126. BLACK HAWK SECHLER MOLINE - M95 (Sechler / Oliver) - - 10.5" unique shaped, graphic wrench with ten openings and a screwdriver. Good++. (R1-419)

PiCs Lots 111 thru 126

0127. WILKISON (sic) PLOW CO. - TORONTO - NO. 90 - - 10.75" with prominent hammer head. Note spelling: "Wilkison vs. "Wilkinson". Excellent. (R1-489)

0128. S & T / S & T - - 3.5" fancy small malleable wrench with six openings and small hammer head. This rarer smaller version is not in Rathbone. Excellent. (see R1-409, no info)

0129. 12-18 (orphan) - - 9" oddball. Good+, not cleaned. (not listed, no info)

0130. CHALLENGE (Batavia, Illinois - Mfg. windmills, gas engines, etc.) - - 7". Good, pitting. (R1-93)

0131. 0862. WESTERN MFG. CO. (Denver, Colo.) - - 9.5". Pitted. (R1-484)

0132. W. P. Co. 94 (Wiard Plow Co. - Batavia, NY) - - 11". Good++. (R1-488)

0133. 432 (Grand Detour Plow Co. - Dixon, ILL.) - - 14" scarce Grand Detour wrench. Good+ with light pitting. (R3-94)

0134. 3420- - 13.5". Six opening variation (see Lot No. 586 for unlisted five opening variation. Good++. (R3-157)

0135. 1216 (orphan) - - 15.75" heavy soe wrench. (not listed, first one seen)

0136. 22 (orphan) - - 8" fragile neat looking oddball. Pitted. (R1-504, oddball wrenches)

0137. LINCOLN / ("W" in a circle logo) - - 12" heavy cast wrench. Good++. (R1-297)

0138. HESTER PLOW CO - 1 (Jacksonville, Florida) - - 14.5" heavy, thick wrench. Pitting. (R1-232)

0139. Lot of Four: Maytag Gas Engine Wrenches (R1-317) - Will sell choice wrench
(1.) MAYTAG (script) - 14987 (Maytag collector's No. 3). Excellent.
(2.) MAYTAG (script) (Maytag collector's No. 2). Good++.
(3.) MAYTAG (script) (Maytag collector's No. 6). Good++.
(4.) MAYTAG (script) (Maytag collector's No. 1). Excellent.

0140. 40 (orphan?) - - 6" oddball with two open ends, a square socket and a hammer poll. Rathbone lists a Number 40 wrench for Brennan Kentucky Drills and Lindeman but no picture of either one. Good+.

0141. Lot of Two Whitman & Barnes Cultivator Type Wrenches (R1-187)
(1.) 2 (orphan) - - 7.5" (not listed)
(2.) 13 (Grand Detour Plow - Dixon, Illinois) - - 7.75". No small wrench on end variation. Pitted, (R3-94)

PiCs Lots 127 thru 141

0142. LA CROSSE / ND86 (Lacrosse Plow co. - La Crosse, Wisc.) - - 9". Excellent. (R1-289)

0143. KELLY PURIFIER CO. - - 7.25". Painted.

0144. J412 (Hayes) / ("P" in a circle logo) - - 9.5" Good+. (R2-127)

0145. F704 - 42 (Oliver) - - 9" Excellent with original finish? (R2-224)

0146. No markings (Messinger Mfg. Co. - Tatamy, Penn.) - - 10". Also looks like a marked Walter Wood's Wrench. Excellent. (see Rathbone R2-199 and R1-494)

0147. E BEMENTS SONS / HC46 - - 10.5". Pitted. (R1-49)

0148. P45 (Red Jacket Mfg. Co. - Davenport, Iowa) - - 10.5". Unusual shaped wrench with two open ends and a large center hex. Good++. (R3-182)

0149. BEMENT & SONS / J183 - - 10" Good+. (R1-49)

0150. J-S CO NO 101 - - 6". Good++. (not listed, no info)

0151. 183 (Oliver) - - 12.5". With hammer variant. Good++. (R2-224)

0152. S. B. CHILLED P.C (South Bend Chilled Plow Co. - South Bend, Indiana) - - 9.5". Pitted. (R1-429)

0153. WIARD. S - - 11.25" Good+ with light pitting. (R1-488)

0154. PPY (Eureka Mower Co) - - 7.75". Excellent. (R1-169)

0155. 32 (Charles G. Allen and Belcher & Taylor.) - - 8.25" wrench and pitman tool. Excellent. (R1-9)

0156. 2091 (Stover Mfg. Co. - Freeport, Illinois) - - 5" Stover windmill tee handled socket wrench. Excellent. (R3-213)

0157. BUCKNER MFG CO. - WR3 - - 6.25 open ended wrench and face spanner. Good++.

0158. DD595 (Dempster Mill Mfg. Co, - Beatrice, Neb also listed under American Harrow) - - 7". Good, pitting. (R1-143, R1-14)

0159. DEMPSTER (Dempster Mill Mfg. Co, - Beatrice, Neb) - - 7.25" Deering Type. Excellent with original paint? (R1-143)

PiCs Lots 142 thru 159

0160. G D MAYO MACHINE CO. - - 6.5". George D. Mayo of Franklin, New Hampshire received a patent for a knitting machine on April 21, 1903. Excellent

0161. AJAX & / SUPERIOR (Rock Island Plow Co.) - - 9" shorter variant. Good+. (R1-401)

0162. TAGUE & KERLIN WRENCH / MIDLAND MFG. CO. - TARKIO MO. USA - 2 - - 9". Good++. (R1-326)

0163. DELUX / IRON FIREMAN (Portland, Oregon and Cleveland, Ohio) - - 11.75". Good++. (not listed)

0164. WIARD PLOW CO - - 11.75" Good++, painted. (R1-488)

0165. BUCKEYE / D165 (P. P. Mast - Springfield, Ohio) - - 5.75". Not listed with a part number. Good++ (see R1-68 and R1-314)

0166. OTTO BERNZ CO. INC. - - 8.5". Good++.

0167. P17 (Stoddard) - - 8". Good++. (R2-270)

0168. 595 (orphan) - - 7.5" oddball. Good+. (not listed)

0169. BURGESS / ST. JOSEPH, MICH. - - 6". Same wrench design found marked "Drednaut" instead of "Burgess". Good++. (Not in Rathbone, see R1-151)

0170. G. A. KELLY PLOW CO. NO. 4 (Longview, Texas) - - 11.5" with a hammer poll. Good++. (R1-277)

0171. G. A. Kelly / 2 (G. A. Kelly Plow Co. - Longview, Texas) - - 9.25" with heart shaped cutout. Pitting, painted. (R1-277)

0172. Marked only "1" - - 7". Looks exactly the G. A. Kelly No. 1 wrench. First one seen without the Kelly markings. Good+. (see R1-277)

0173. V. BERKEAL - ROTTERDAM - - 7.25". Three opening wrench with plated, pebbled finish. Same wrench design found marked "Berkel & Parnall - London: (see R1-52) Excellent.

0174. G. M. CO. 7/16 and 1/2 / PEERLESS (Geiser Mfg Co - Waynesboro, PA) - - 8.75" Good with pitting. (R1-200)

PiCs Lots 160 thru 174

0175. 02 (Ellis Keystone Ag. Works) - - 9.5". Excellent. (R2-89)

0176. RHEA-THIELENS IMP CO PEORIA USA - - 7" Interesting wrench with lots of lettering. Good+. (R1-395)

0177. CHASE PLOW CO (Lincoln, Neb.) - - 10.25". No part number variation. Good+, painted. (R1-97)

0178. CHASE TINSMAN PLOW CO (Lincoln, Nebraska) - - 10.25". Good++. (R1-97)

0179. ROYAL / C46 - - 9.75" Good+, painted, (R3-190)

0180. SATTLEY MFG. CO. - 1031 - - 12.5" Disc plow wrench with disk straightening slot. Good+, some light pitting. (R1-413)

0181. LX103 - 3/4 SQ NUT - 5/8 HEX NUT (Allis Chalmers) - - 15" Good++. (not pictured in Rathbone's book)

0182. ALLIS-CHALMERS MFG. CO. - LA CROSSE WORKS (with a "NR" in a circle logo) / 300755 - - 11.5". Good++. (R1-11)

0183. 286 (Blount Plow Works, Evansville, Ind.) - - 9.75" multi-opening wrench, no wing nut opening variant. Good++. (R2-37)

0184. OLIVER RP210 / OLIVER - - 13.5" Good++. (R1-361)

0185. RAKE - - 9" pin wrench. Good+ with some pitting.

0186. W & M - - 8.25". Thin cast wrench. Good++. (R1-477 with no info)

0187. WORCESTER M371 / WORCESTER (Richardson Mfg. Co. - Worcester, Mass.) - - 10". Good++. (R1-498)

0188. ROBINSON SPREADER CO - VINTON IOWA / A48 - C - - 10". Excellent. (R1-399)

0189. BLACK HAWK / M168 (Sechler, Oliver) - 6.5" Good with medium pitting. (R1-361, R1-419)

PiCs Lots 175 thru 189

0190. LA CROSSE PLOW CO. / K128 - - 17.75". Large wrench with graphic markings. Good++. (R1-289)

0191. FRANK WHEATKEY - TULSA / 3 - LOW PRESSURE - - 17.7" large odd wrench. Excellent.

0192. ATHENS PLOW CO. ATHENS TENNESSEE - T100 - - 18.5" Curved handle box end wrench. Excellent with most of it's original finish. (R1-23)

0193. 1988 (orphan) (with a "HE" logo - - 15.25" Heavy cast wrench Good++,.

0194. WRENCH FOR GOVERNOR 2463 (Stickney Gas Engines - Charles A. Stickney Co., St. Paul, Minn.) - - 17.5". Good++. (R2-253, under Russell & Co., also see R3-210 )

0195. NEWELL SANDERS PLOW CO A260 (later IHC) - - 19". Good++. (R1-351)

0196. THE MAXFER TRUCK & TRACTOR COMPANY / 150A - - 18" large sign like hub type wrench. Painted, some pitting. (R1-315)

0197. 2083E (Port-Huron Engine & Thresher Co. - Port Huron, Mich.) - - 19.5" extra large double open end S-Wrench for Port-Huron Steam Engines. Good+. (R1-382)

0198. 2763 (orphan) - - 17" with bold raised markings. A "holey" wrench. Look like Case 1407 wrench Lot No. 199 below. Good++. (not listed no info found)

0199. 1407 (Case T. M. Co.) - - 17" axle wrench. Good+, no patina. (R3-42)

PiCs Lots 190 thru 199

Adjustable Wrenches - Part Two (lots 200 thru 284)

0200. WIZARD - THE RICHARDS MFG CO AURORA, ILL - PATENTED MAY 21, 07 OTHER PATS PENDING - - 8" adjustable wrench that combines a double screw Crescent type adjustment on a ratcheting head. Patented by Joseph N. Noyer of Gould City, Washington. Good+. (S156T)  PAT

0201. Marked only: "11" (David Bradley) - - 8" malleable cast sliding wedge adjust alligator wrench, smooth jawed nut wrench version. Pat 1-6-1891 by Theodore Vandegrift of Shelbyville, Indiana and mfg. by the Vandegrift Mfg. Co. of Shelbyville, Indiana. Listed in David Bradley Parts Lists. Good++. (S546)  PAT

0202. Unmarked - - 8.75" cast adjustable nut wrench. Produced circa 1894 by Whitman & Barnes as "The Ideal Screw Wrench". Probably the rarest Whitman & Barnes wrench. First one we have had to list. Good+++. (C332, patent not found)

0203. CRONK - - 8" quick adjust with sliding nut jaw and three open end wrenches. Good+.  PAT.

0204. ANY ANGLE WRENCH - PATENT 1916 - LIMA., O. USA / DROP FORGED STEEL - - 8.5" Crescent type adjustable wrench with an adjustable angle head. Mfg. by Atco Wrench Co. and patented by Ramson Bovee 11-21-1916. Excellent. (S311)  PAT

0205. COLUMBIAN WRENCH - PAT. SEPT 13, 1892 - C0LUMBIAN MFG. CO, BROCKTON, MASS - - 7.5" wood handled variation of The Columbian pipe wrench. Patented by Daniel R. Porter of Chelsea, Mass. Good+ with an area with pitting. (S591)  PAT

0206. E. WRIGHT PAT OCT. 3, 93 (weak marking, not all readable) - - 8.5" all metal screw adjust nut and pipe wrench with a lever for final tightening or releasing. Made by the Wright Wrench Co. of Worcester, Mass and patented by Edward Wright of Worcester. Scarce small size. Good+ with jaw insert chip. (S643, C342)  PAT.

0207. Marked only "1" - - 11" plier type screw adjust pipe wrench. Good++.

0208. UNIVERSAL METAL PRODS - L.A. CALIF. - PATENT NO. 2210274 / 10" DROPPED FORGED - - 9.75" self adjust wrench with spring loaded jaws. Described in the patent as a bolt, nut, and pipe wrench. Patent was granted to Oscar Becklin, Los Angeles, Calif. on Aug. 06, 1940. More often found marked Balin Tool Co. Excellent. (not listed)  PAT

0209. 8" PLIER WRENCH - PAT'D MAR 7, 1922 / PUYALLUP, WASH. - - 8.5" quick adjust plier type nut wrench. Patented by William T. Long of Puyallup, Wash. Good++. (S246, C339)  PAT

0210. LEVER WRENCH CO - DULUTH, MINN / HEIMBACK PATENT - - 10" quick adjust nut wrench with a lever and rack teeth. Patented 6-8-1915 by Alton Heimbach of Duluth. Good++. (S308)  PAT

0211. Unmarked - - 10" all metal screw adjust nut wrench with skeleton type handle. A knurled brass adjusting nut rotates a threaded center shaft that adjusts the lower jaw. Pictured in Schultz's book but with no information. Excellent. (S452)

0212. THE ANDERSON / PAT-6-23-14 - - 6.75" Crescent type with a locking adjustable angle head. Patented by Anton E. Anderson, Frank L. Bailey and William C. Cummings all of Okmulgee, OK. Mfg. by the Anderson-Bailey-Cummings Co. of Okmulgee, OK. Good+. (S311, C41)  PAT.

0213. Unmarked - - 8.5" quick adjust with sliding nut jaw and three open end wrenches. Similar to wrenches seen marked "Cronk" (see lot 203 above) Good+, not cleaned.

0214. PAT. MARCH 31 1908 (McAslan patent) - - 7" combination slip joint pliers, screwdriver and adjustable alligator wrench. Pat 7-2-1907, 3-31-1908 and 7-19-1910 by Norman McAslan of Yorkshire, Iowa. Good+. (S255, C215)  PAT.

0215. 30 26 - 26 30 - - 8" wooden handled coach wrench with twin jaws and hexagon handle. Good++.

0216. Marked only "6" - - 7.5" odd screw adjust pipe wrench listed in Schulz's book as "Leader Pipe Wrench. Pat. Sept. 1. 1903. Made by Ripley Pipe Wrench Co., Ripley, NY." Patent was issued to George Walker Johnson of Erie, PA. Good++. (S610)  PAT

0217. CLUTCH WRENCH CO / WAUKESHA, WIS. / PAT JAN 7, 02 - - 7.75" all metal unique quick adjust nut wrench with a spring loaded lower jaw and set screw. Good+. (S486)  PAT

PiCs Lots 200 thru 217

0218. Unmarked - - 10" Taft's Railroad & Mowing Machine Wrench . A threaded shaft screw adjust nut wrench made by Geo. C. Taft in the 1850's and later by the Coes Brothers. Sometimes found with Taft's May 31, 1859 patent date. Good+. (S418, C295)  PAT.

0219. NO. 9 - PAT'D MAT 5, 1908 / WAKEFIELD WRENCH MADE IN WORCESTER, MASS. USA - - 9" combination screw and quick adjust auto type wrench. Patent was granted to John E. Wakefield of Worcester, Mass. Haven't seen these markings on a Wakefield wrench before. Good++. (similar to S559 and C317)  PAT

0220. SEAHOLM & SANDELL MFG CO DETROIT USA / PATENTS PENDING - - 10" rack type quick adjust wrench. Good+. (S26, patent not found)

0221. THE VLCHECK TOOL CO - PAT APP'D FOR / NO. 2 - - 10.25" adjustable spanner wrench with a sliding upper jaw with spanner peg. Made by the Vlchek Tool Co. of Cleveland, Ohio. Pat 1-18-1916 by John Bartenstein. Good+. (C316)  PAT.

0222. PIPE WRENCH / BEMIS & CALL CO. H & T. CO - SPRINGFIELD, MASS. USA - - 10.5" wooden handled pipe wrench with short knurled adjusting sleeve and replaceable lower and upper jaw inserts. Good with some minor dings, handle crack. (similar to S836 but with different adjusting nut)

0223. F. W. MACKE & CO QUICKSET WRENCHES / KOKOMO, IND. - PAT. APRIL 22 - 1919 - - 8" all metal screw and quick adjust pipe wrench. Patented by Joseph Nielander of Kokomo, Indiana. Good+. (S616)  PAT.

0224. SIMPSON KNOWLTON (with an eagle logo)+ - - 12" turn handle to adjust nut wrench with a large hammer poll on lower jaw. Good. (this is the actual wench at S432)

0225. BAROALO BUFFALO - 14 / DROP FORGED PAT 1911 (with a "B" in a circle logo) - - 12.5" pipe wrench with a rotating adjusting mechanism. Canadian patent was granted to William Andrew of Toronto, ON Canada on Oct. 17, 1911Excellent.  PAT

0226. UTILITY WRENCH CO LD. NEW YORK - USA - PAT'S AUG 13, 1878 - SEPT 4, 1883 - - 12" wooden handled quick adjust nut rack wrench with a spring loaded release lever and ultra fine rack teeth. High quality materials and workmanship. Patented by Henry W. Atwater of Newton, Mass. Good+ with some minor dings, edge grind marks. (S541)  PAT

0227. Unmarked - - 12" combination hammer and rack type quick adjust nut and pipe wrench. Looks like a version of the tool patented by Ezra Ripley (of Troy, NY) on 4-7-1857. Excellent with original finish? (see S823)  PAT.

0228. AGR'L ENGINE WRENCH - PATENTED - SEPT 25, 1877, MAR 1, 1881, DEC 12, 1882 - - 12.75" combination wood handled nut and pipe wrench with hex and ribbed adjusting sleeve. Patented by Bernard Donahue of New York. Good+ with some handle damage. (like S576)  PAT

0229. PATENT 1886 - - 7.5" adjustable wrench with wing nut. Looks like L. S. and E. G. Hoyt's of Croton Falls, Mass. patent of May 29, 1866. Sometimes found with a hammer head instead of the large triangular hang hole. Good+ with owner's ID "BETT". (S914, see S914)  PAT

0230. MFD. BY McKAIG-HATCH INC. - BUFFALO NY - - 10" Crescent type adjustable wrench with notched jaws and an adjusting lever. Good++. (S465)

0231. WHITMAN & BARNES MFG. CO. - PAT. MAY 19, 1891 - MADE IN USA - (W & B logo) - - 9.25" all metal screw adjust pipe wrench with reversible jaw insert. Patent was granted to Frank S. Cook of Chicago, IL. Good++.  PAT

0232. THE J. R. LONG WRENCH CO. - AKRON, OHIO - PAT. APR. 17, 1906 - - 8" sliding wedge adjust. Patent was issued to John R. Long of Akron, Ohio. Good+ ( S549B)  PAT

0233. Unmarked - - 10" heavy all metal coach wrench with octagon handle. Good+, not cleaned.

0234. Unmarked - - 10" all metal single jawed coach wrench with octagon handle. Good+. (S434)

PiCs Lots 218 thru 234

0235. PAT'D MARCH 15, 04 - SNIDER WRENCH & TOOL CO. - COLORADO SPRINGS - - 13.25" heavy self adjust nut and pipe wrench with a spring loaded upper jaw. Patented by John Charles Snider of Cripple Creek, Colorado as a "Combined Pipe and Nut Wrench". Good+ with light pitting. (S357)  PAT

0236. SHAW WRENCH (with B in triangle logo) - PAT. APR. 26, 1910 - - 14.75" Shaw alligator type wrench mfg. by Billings & Spencer. Patent was granted to George Bryar of Boston, Mass. Good++ with a couple minor jaw serration chips. (S36)  PAT

0237. J. Boess (may be owner's Id) - - 13.5" threaded shaft center screw adjust with wooden handle and brass ferule. Neat wrench, never seen one before. Excellent. (not listed, no info found)

0238. No. 00 BOSTONG - PAT. 10-17-1905 / WALWORTH MFG. CO. - BOSTON USA - - 17.5" chain type pipe wrench. Patented by George M. Gealy of Enon Valley, PA. Previous examples seen were mfd. by Gealy in Grove City, Penn. Good++.  PAT

0239. Unmarked - - 17.25" self adjust pipe wrench. May be shop made. Good++. (not listed, no info found)

0240. ? A. B. CO. (can't read first letter) - - 15.5" unusual single ended alligator wrench. Overall light pitting. (not listed, no info found)

0241. WARE WRENCH CO. - WORCESTER, MASS. - - 15" rare roller jaw pipe jaw wrench. With a wood insert between two steel plates. Patented on Sep. 16, 1902 by Erastus A. Ware of Noank, Conn. Scratched initials "MW" indicate this is from the collection of Marvin Wullweber and was sold at his 1998 auction. This is the actual wrench pictured in Schulz's book and the only one I know of. Good+ (S730, C322)  PAT

0242. EVANS SURE GRIP 14 IN - - 12.25" unique quick adjust pipe wrench. Never seen another. Excellent. (not listed, no info found)

0243. THE BECKLIN WRENCH CO. SEATTLE, WASH / PAT MAR 16, 1920 - 60 CARBON STEEL - - 14" quick adjust rack wrench with unique pivoting release lever. Wrench looks like the Jan. 17, 1928 patent issued to John H. Lagreid and Oscar Becklin both of Seattle. Good++. (S713)  PAT.

0244. Unmarked - - 14". Possibly an earlier version of the Becklin wrench (see lot No. 243 above). Patent was issued to Lagreod and Becklin on Mar. 16, 1920. May be a prototype. First one I seen. Excellent. (not listed)  PAT.

0245. STILSOMATIC TOOL CORP. - ANNAPOLIS, MD - PATENT NO. 2555399 - 14 - - 14". Variation of a Stillson type pipe wrench with an unique pivoting upper jaw. Patented on June 05, 1951 by Ottavio A. Capra - Jamaica, NY. Only the second one we have had to list. Good++. (not listed)  PAT

0246. EMMETT WRENCH CO USA - PATENT PENDING / 14 - DROP FORGED MANGANESE MOLYBDEIUM STEEL - HEAT TREATED - - 15" quick adjust nut wrench that looks like a Crescent type but the sliding jaw can be pushed into position and released with a button below the jaws. Also has a hex and a square box wrench openings on the handle . Patent was issued to Milton W. Emmett of Los Angles, Calif. on Aug. 9, 1932. Real oddball and first we have had to list. Good++ with some light pitting on one side. (not listed)  PAT

PiCs Lots 235 thru 246

0247. Marked only with a Crossbow Logo and a "1" - - 16.5" extra heavy nut wrench adjusted with a center knurled, threaded sleeve. Looks like wrench patented by Jozua Cornelis Hendrikus Van Duijl of Kralingsche-Veer, Netherlands on March. 15, 1898. Exceptionally well built, good looking wrench in excellent condition. Originally sold on the 2007 Vern Nail Auction (not listed in Schulz but see Wullweber-page 61)  PAT

0248. PATD 1894 - - 16" Wm. Houghton from Paris, Ontario Canada patented this wedge locking quick adjust wrench on Feb. 20, 1894. Good. One of the lips on the lower jaw guide is broken off and missing. (S499)  PAT

0249. SCHICK QUICK-GRIP - PATENT PENDING - 1-1/2 - - 15" aluminum alligator wrench with steel jaw inserts. Excellent. (not in Schulz, patent not found)

0250. J. H. WILLIAMS & CO / NO. 4-1/2 BULLDOG - - 24" single ended alligator wrench. Scarce large size. Excellent.

0251. 5 - KEYSTONE CROCODILE WRENCH / 5 - KEYSTONE DROP FORGED WORKS - PHILADELPHIA, PA USA - - 28" single ended alligator wrench. A rare alligator wrench brand in the seldom found No. 5 size. Good++. (see C190)

0252. Unmarked - - 35" extra large self adjusting pipe wrench. Jaws can be set in two different positions. Good++. (not listed, no info found)

PiCs Lots 247 thru 252

0253. Lot of Two: 6" Curved Handle Crescent Type Wrenches (with open handles)
(1.) ERIE / 6 IN.
(2.) B & C (Bemis & Call) / 6 IN.

0254. DICKSON AUTOMATIC - 8 - - 8" quick adjust pipe wrench with a spring wrapped around the upper jaw shaft. Patented 3-11-1913 by Horace L. Dickson of San Leandro, Calif. Excellent. (not listed)  PAT.

0255. Unmarked - - 10" Coes type wood handled monkey wrench with an adjusting screw locking lever. Patented by Walter E. Taft of Providence, RI on May 10, 1887. Advertised as "Taft's Vise Wrench". Good+ with a replaced wooden handle.  PAT.

0256. J. T. HAYDEN'S PAT. AUG. 18, 1885 - THE BELDEN MACHINE CO. - NEW HAVEN, CONN. (some weak markings) - - 9.5" girdle type wooden handle pipe wrench. Good++. (S134)  PAT.

0257. Unmarked - - 8" center screw adjust nut wrench with wooden knife type handles. Good++. (not listed, no info found)

0258. MERIT / MADE IN USA - -9.5" aluminum handled nut wrench with dual threaded shafts. Scarce large size. Good++. (S442)

0259. Unmarked (Gates Bolt Wrench) - - 15" all metal nut wrench with an unique adjusting screw on top of upper jaw. Patented by Alfonso D. Gates of Cleveland, Ohio and mfg. by the Lorain Wrench Co. of Lorain, Ohio. Rare large size. Good+ with area of pitting on one side. (S391)    PAT.

0260. BEMIS & CALL H & T. CO. - SPRINGFIELD, MASS. USA / No. 3 - - 12.5" wooden handled pipe wrench with long four ring adjusting sleeve and replaceable lower and upper jaw inserts. Good. (S836)

0261. COMET NO 3 - PAT JAN 27 1903 / H. W. & M. CO. (Hilts Wrench & Machine Mfg. Co.) - RICHFORD NY - 13.5" quick and screw adjusting nut wrench. Patented by Jacob L. Bovee of Richford, New York. Good++. (C167)  PAT.

0262. TOWER & LYON - NEW YORK - PATENTED SEPT 25TH 1877 - MAR 1ST, 1881 - DEC 12TH, 1882 - Nov. 12, 1889 - - 13" Briggs's Pattern combination nut and pipe wood handled monkey wrench with ribbed a hex adjusting nut. Patented by Bernard Donahue of New York. Good+, some hammer damage. (S576)  PAT

0263. W. M. & W. S O. FRAMINGHAM MASS / PAT'D JUNE 15, 97 - - 12" wood handled screw adjust nut wrench with a spring loaded lower jaw that provides a ratcheting action. Made by Whiting, Macomber & Whiting and patented by Chester Johnson of Boston, Mass. scarce larger size. Good++. (S639) (S639)  PAT.

0264. JACKSON / WRENCH - - 8.25" quick adjust pipe wrench. Good++, not cleaned. (S683 with no info)

0265. PAT'D NOV. 20, 1906 - - 10" screw adjust pipe wrenches with unique jaw inserts. Patent was granted to Charles L. Fortin of Ballston Spa, NY. Good++.

0266. SANDERS WRENCH - MORRISTOWN, TENN. / PATENTED JUNE 4, [sic] 1904 - - 10" screw adjust combination nut and pipe wrench. Correct patent date is June 14, 1904 which was issued to Alfred M. Sanders, Of Morristown, Tenn. According to the patent the upper jaw should pivot, the jaw on this one is solid. Good with over all light pitting. (S572)  PAT

0267. THE SHELBY SPECIALTY CO. - SHELBY, OHIO - PATENTED - - 9" quick adjust combination nut and pipe wrench with rack teeth and a geared screw on a lever that releases the screw for quick adjusting or to remove and reverse the lower jaw assembly for pipe or nut use. Patented Feb. 6, 1917 by Wilbur Upson of Mansfield, Ohio. Good++ with minor edge dings. (not listed in Schultz, Wullweber No. 743)  PAT

0268. SARGENT BROSNIHAN - PATENT SEPT. 4, 1900 - - 8" Coes type wood handled pipe wrench with distinctive serrated jaw inserts. Made by Sargent & Co. of New Haven, Conn. and patented by Thomas Brosnihan of Livermore Falls, Maine. Good with hammer dings and a crack on the back edge. (S590)  PAT.

0269. A. G COES & CO - WOSRCESTER MASS. / PAT DEC 28, 75 & JULY 8, 84 (and Coes steam engine governor logo) - - 10" Coes wood handled jog bar monkey wrench with the patented replaceable threaded insert for the adjusting screw. Good with light pitting and minor dings. (HP25)

PiCs Lots 253 thru 269

0270. THE WAKEFIELD WRENCH - WORCESTER, MASS. / PAT. JUNE 30, 91 - OTHER PAT'S PENDING - - 11" rack wrench that adjusts with a spring loaded top lever with serrated jaw inserts. Patented by John Wakefield of Worcester, Mass. Good++ except top jaw segment is chipped. (S727)  PAT

0271. THE ARMSTRONG RAPID No. 2. - PAT. DEC. 9, 79, MAR. 27, 83 / F. ARMSTRONG - BRIDGEPORT, CONN. - - 11.75" rack type quick adjust with a lever for applying additional tightening pressure. 1879 patent was issued to Dan Foster of Waltham, MA, the 1883 to Frank Armstrong, Bridgeport, CT. Good++. (S474, C42)  PAT.

0272. LAGRIPPER WRENCH CO. LTD - BATTLE CREEK, MICH / PAT JUNE 28, 1898 - - 12". Quick adjust rack wrench with a handle length release lever. Patent by George Van Schoick of Coldwater, Michigan. Excellent. (S688)  PAT

0273. SPERY PIPE TONGS - PAT. JAN 20, 91 - - 11.25" adjustable pipe wrench. Patent was issued to Charles F. Spery of Hermann, Missouri and mfg. by the Spery Pipe-Tong and Tool Mfg. Co. of Hermann, MO. Good++. (S742)  PAT

0274. CLIPPER 14 / PATENT PENDING - - 12.75'" malleable self adjust with replaceable jaw inserts. Rare. Good+ with minor dings, some insert damage. (S329)

0275. MILTON B. MCCOY - INVENTOR - PATENT PENDING - - 12" over complicated plier type wrench with a sliding wedge adjustment. Judging from the stamped markings and overall look of this wrench it's either a prototype or one of a limited number manufactured. Excellent. (S553 with no info, patent not found)

0276. Unmarked (Terry's patent) - - 12" screw adjust wrench with serrated jaws. Looks like Le Grand Terry of Horseheads, NY patent of Dec. 21, 1897. Good++ except top jaw serrations are damaged. (not listed)  PAT

0277. WALCO HEX WRENCH NO. 1 / PAT. APPLIED FOR - WALWORTH MFG. CO. - BOSTON USA - - 13" Stillson type wrench with jaws for hex nuts and bolts. Excellent. (S900)

0278. Unmarked - - 12" odd pipe wrench with a quick adjust upper jaw. Shop made prototype? Good++ except for a welded repair on upper jaw. (not listed, no info found)

0279. Markings have been obliterated by punched owner's ID but should read LINDSAY'S PATENT - DEC 12, 1865 - - 12" wood handled monkey wrench with a reinforcing bar on top of the shaft under the upper jaw. Patented by John Parker Lindsay of New Haven, Conn. This wrench was manufactured by several different companies including A. G. Coes & Co. (see HP16). Good with several dings, handle cracks.  PAT

0280. Lot of Two Plier Type Wrenches
(1.) PROTO 258 - LOS ANGLES MFD USA - - 8.25" solid joint pliers. Excellent.
(2.) THE WEST HAVEN MANUFACTURING CO. - NEW HAVEN, CONN.- PAT'D APRIL 4, 1911 - MADE IN USA - - 8.75" pliers and two wire cutters with a screw adjustment to set the jaw opening. Patented by William A. Peck of Jersey City, NJ. Poor, pitted. (not listed)  PAT

0281. "BESTYET" WETMORE MFG CO GALESBURG ILL - PATENT APP'D FOR - - 8" double ended alligator wrench with three thread dies with a set screw to adjust the die size. Patented 3-10-1908 by Gustavus A. Smith of Marshalltown, Iowa. Good. (S9)  PAT.

0282. NILSON-WALTERS WRENCH CO - CASSELTON, N. DAK. / PAT'D DEC 25, 1900 - - 6.75" alligator wrench with a quick adjust upper jaw. This Christmas Day wrench was patented by Nils Nilson of Absaroka, ND (which is only 197.4 miles from Lawrence Welk's home town). Also found marked " NILSON Co. - Casselton N.D". Good++ with most of the original plating. (C234, S32)  PAT.

0283. RIPLEY'S PATENT AUG. 14, 1860 - 96 - - 7.5" combination pliers type wrench and a rack teeth type adjustable nut wrench. Rare pre Civil War wrench patented by Ezra Ripley of Troy, NY, First one we have had to sell. Excellent, uncleaned condition. (not listed in Schultz, Wullweber-177, this is the wrench in the photo.)  PAT.

0284. Unmarked - - 9" brass quick adjust nut wrench with wood slab handles. Unique quick adjust button moves in a cutout section of the slab handle with a fine adjust knob on the end of the handle. One of the neatest shop made wrenches I have seen. (not listed)

PiCs Lots 270 thru 284

Carriage, Buggy and Wagon Wrenches, Etc. - Part One (lots 285 thru 330)

0285. SUSQUEHANNA FERTILIZER CO. / OF BALTIMORE CITY MD. - PAT MAY 2, 93 - 7/8 (and a "Z" logo. for Henry Zook?) - - 8.25" odd cast buggy wrench patented by James K. Byler and Henry S. Zook (both from Morgantown, Penn. Good++, painted. (R1-447)  PAT

0286. H. S. ZOOKS VEHICLE WRENCH. / BLUE ROCK PA. - 1-1/8 - (with a Z logo) - - 8.5. buggy wrench like the Byler/Zook patent above. Some pitting. (R1-503)

0287. COOK - PATD SEPT 1, 85 / 7/8 - - 8.5" buggy wrench with a nut holder. 7/8" size. Patented by Roswell Cook of Ilion, NY. Good++. (S240, R1-112)  PAT

0288. SHELDON AXLE CO / 151X (Sheldon Axle Co., Wilkes-Barre, Penn.) - - 8.75" buggy wrench. Good+, light pitting. (R1-423)

0289. FREEPORT (Moline Plow Co. - Moline, Illinois) - - 7" Buggy wrench. Good+. (R1-184)

0290. ZIMMERMAN- - 7.5" Buggy wrench. Good with overall medium pitting. (R1-502)

0291. SPAULDING / C - (Spaulding Mfg. Co. - Grinnell, Iowa) - - 8" buggy wrench. Rare, only the second one we have had to sell. Good with a small jaw crack, casting blemish over part of the name. (R2-268, R3-206)

0292. BANNER / 1 - 2813B PATENTED (Dayton's "D" in a circle logo) - - 7.25" Dayton style buggy wrench. Good++ with light pitting. (R1-42)

0293. FLANDRAU & CO. - NEW YORK - - 9". Flandrau was a very early high end carriage builder in new York City. The unique design and scarcity (this is the first one we have had to sell) combine to make this one of the most desirable carriage wrenches. Same wrench design as the also rare Brockett & Tuttle Wrench (see R2-42). Excellent condition. (not in Rathbone's book)

0294. UNCLE SAM - PAT APLD FOR / 1-1/8 - - 8.5" buggy wrench with spring loaded nut holder. Excellent. (R41-63 )

0295. STUDEBAKER / 1 - - 8.25" buggy wrench. Good++, painted. (R1-444)

0296. STUDEBAKER / 1-1/8 (a "M" in a square logo) - - 8.25" buggy wrench. Good, tiny, tight jaw crack, polished. (R1-444)

PiCs Lots 285 thru 296

0297. SHELDON AXLE CO / 211 (Sheldon Axle Co., Wilkes-Barre, Penn.) - - 9.75" buggy wrench. Good++. (R2-264)

0298. SHELDON AXLE CO / 151X (Sheldon Axle Co., Wilkes-Barre, Penn.) - - 9" buggy wrench. Good, not cleaned. (R1-423)

0299. SHELDON AXLE CO / 76 (Sheldon Axle Co., Wilkes-Barre, Penn.) - - 9" buggy wrench. Good++. (R2-264)

0300. H. H. BABCOCK CO.- 28 (Watertown, NY) - - 9.5" buggy wrench. Good, light pitting, some faint markings. (R1-36)

0301. Lot of Two: Buggy or Wagon type Wrenches
(1.) Can't read markings? - - 12" odd tool with teeth on one side of opening.-
(2.) Unmarked - - 12" neat oddball buggy or wagon type wrench with seven openings.

0302. KAUFFMAN - 1 (Kauffman Buggy Co. - Miamisburg, Ohio) - - 7.5" rare buggy wrench. Excellent with some of the original black Japanned finish remaining. (R1-276)

0303. Lot of Two: Buggy Wrenches
(1.) 7320C (with Eberhard's "E" in a circle logo) / PATD - - 8.75". Wrench has been chrome plated.. (R1-155)
(2.) HOUGHTON SULKY (with an arrow logo) - - 5.25" flat steel. Excellent. (R2-132)

0304. Lot of Three: Oddball Wagon Type Wrenches.

PiCs Lots 297 thru 304

0305. MARION JACK (in cutout letters on jack handle) - - 27" buggy jack with cutout letters.

PiC Lot 305

0306. Unmarked buggy or wagon wrench and jack. - - 31" (wrench) and 33" (jack). An 1890 Fred A. Wegner & Co. advertisement promotes this wrench and jack as the Daisy Wagon Wrench and Common Sense Jack. Wrench patent was issued to Frederick A. Wegner of Three Rivers, Mich. on Apr. 22, 1890. Rare wrench (never had one to sell before) and even rarer jack. That they both survived together for over 120 years is amazing. Jack has over all light pitting or roughness, wooden jack is Good++. (C324)  PAT

PiC Lot 306 and PiC Lot 306 Advertisement

0307. NO. 530109 - PAT. DEC 4, 1894 / S. J. JOHNSTON - LEESBURG VA. - 2 - - 22" cast carriage or wagon lifter type jack with an adjustable wrench feature. Johnston also had several wrench brace combination tools produced by the Lowentraut Manufacturing Co. of Newark, NJ. Good++. (C184)  PAT

0308. MCFARLAND'S PAT. JAN 6, 85 / XX 310453 - - 21.5" cast carriage wheel lifter type jack. Patent was issued to James McFarland of Richland, Iowa. patent mentions jack having a nut wrench but this example doesn't have one. Good++.  PAT

PiCs Lots 307 thru 308

0309. PAT OCT 27. 74 - - 13" combination brace type buggy wrench and oiler. The Oct. 14, 1874 patent marked on the underside of the pad was issued to William R. Moore of Burton, Ohio but the tool closely resembles Moore's Sep. 13, 1898 patent. The brace type wench has an adjustable socket that is locked into position with a notched bar. the oiler is operated by applying pressure to a spring loaded rod. High on the "Bucket List" of most buggy wrench and brace collectors. Of the two or three known to exist, this example is probably in the best condition by far. Excellent condition with most of the Japanned finish remaining, which is amazing for a wrench of this rarity and fragile construction.  PAT and  PAT

0310. No markings (Wyler's patent) - - 11" buggy wrench and oiler. the tubular oil reservoir also serves as the wrench handle. Patent was granted to William H. Wyler of Ragersville, Ohio on May 02, 1899 We have never had an example of this wrench to list before and now we have two different variations. This one has a single box opening and the a three opening wrench is part of the oil reservoir cap. See below for the other variation. Rare tool in Excellent condition. (C344)  PAT

0311. No markings - - 8.5" variation of Wyler's patent buggy wrench and oiler. Like Lot 310 above but with only the one square wrench opening and unlike the other variation this one has a nut holder. The whole oil tubular handle unscrews from the wrench head to fill the reservoir. Another rare tool in Excellent condition. (C344)  PAT

0312. PAT'D MAR. 28, 82 - - 12.5" Rare wooden handle screw adjust carriage/wagon wrench with an oil can holder. Patented by Prescott Kinsman and Josiah Merrill of Great Falls, New Hampshire and mfg. by the Eureka Wrench Co. of Great Falls, NH. Excellent with a good looking replacement oil can (none known with original can) (C130)  PAT

PiCs Lots 309 thru 312

0313. Unmarked - - 11.5" turn handle to adjust buggy wrench. Made of brass with a wood handle. It may be an one off shop made wrench, if so whoever made it did an outstanding job. Good++ with the jaws slightly sprung. (this is the actual wrench shown in S1063 and Wullweber 180)

0314. PAT'D APR. 21, 1896 (Grannis patent) - - 9" adjustable buggy wrench with a crank type handle that locks in place for final tightening. Patented by John Grannis of Lancaster, NH. Good+, no patina. (not listed)  PAT

0315. PAT APPD FOR - - 7" clamp type buggy and wagon wrench with a crank type handle. Patent granted on June14, 1898 to Walter H. Robinson -of New York, NY and Edward J. Lawless of Orange, NJ. Mfg. by the E. J. Lawless Co. of New York City. They advertised that beside a buggy and wagon wrench it could be used to pull nails and stones from horses hoofs, as a hammer, vise, socket wrench, lag screw wrench and pipe wrench. Rare and in Excellent condition. (C267)  PAT

0316. Marked only DEC. 04, 1906 (with a cutout star logo) - - 4.75" different little adjustable buggy or wagon hub wrench that locks the axle nut to the hub. The wheel is then turned to loosen or tighten the nut. Patented by Thomas O'Hora (Avoca, Wisc.) as a "Hub Nut Wrench for Vehicles". and marketed by the Star Carriage and Buggy Oiler Co. of Rockford, Illinois. Rare wrench in Excellent condition with most of the original finish. (not listed)  PAT

0317. PAT APPLIED FOR - - 8.5" buggy wrench with a lever type nut holder. Rare wrench, first one I have seen, couldn't find a patent. Excellent with a replaced lever spring. (not listed, no info found)

0318. No markings - - 8.5" buggy wrench with a nut holder. Rare, first one I have seen. Good+, some pitting. (not listed, no info found)

0319. Unmarked (Miller Falls Co of Miller Falls, Mass.) - - 8" adjustable buggy wrench with a metal spinner handle. Square head variation. Good++, plated finish, jaws slightly sprung. (S207, C221)

0320. PAT'D AUG. 6, 1878 (Gifford patent) - - 10.5". Rare complicated carriage wrench that locks the axle nut to the wheel hub. Patent was granted to John Summerfield Gifford of Fairfield, Maine. Good++. (not in Schulz but this is the actual wrench shown in Wullweber 179)  PAT

PiCs Lots 313 thru 320

0321. PARRY (Parry Mfg. Co. - Indianapolis, Ind.) - - 6.75" cast buggy whip holder and wrench combination. Excellent. (R1-372)

0322. AMES (F. A. Ames Co. - Owensboro, KY) / PATENTED (with Dayton's "D" in a circle logo) - - 7.5" Dayton type buggy wrench. Very rare, first we have listed. Good+ with overall light pitting or casting roughness. (R!-18)

0323. AMERICAN WRENCH - PAT. SEPT. 8, 1885 - AUGUSTA, MAINE - - 9.5" wooden handled turn the handle to adjust carriage wrench, single jaw variant. Patented by Bradford Lancaster of Augusta, Maine. Good+, not cleaned. (S231, C40, C50)  PAT

0324. PAT'D MAY 22, 1877 (Mitchell's Patent) - - 9" turn handle to adjust buggy wrench. Patented granted by Joseph P. Mitchell of Bedford, Mass. and produced by Bowker and Tripp of New Bedford. Excellent with neatly stamped former owner's ID "T. F. Golding". (S211)  PAT

0325. 101 UNIVERSAL WRENCH CO BARTOW, FLORIDA - PAT 1921 - - 11" with a thumbscrew adjusted hinged lower jaw and a pry bar on the end. Excellent with original plated finish. (S209)

0326. LAWRENCE-CLARK CO. / PAT. 1920 - SPRINGFGIELD, MASS - - 10.75" Adjustable wrench with a pry bar end. Excellent. (not listed, no info found)

0327. THE SAYERS & SCOVILL CO (Cincinnati, Ohio) / 2325 - - 13.5". Good++. (R1-415)

0328. OLIVER NO 2 - PAT APLD FOR - OLIVER MFG CO CHICAGO USA - - 14" wagon wrench adjusted with a disk and rack teeth. Patented 9-10-1907 by Wm Oliver. Good++. (S236)  PAT

0329. OLIVER NO 22 - PAT APLD FOR - OLIVER MFG CO CHICAGO USA (with star logos) / PAT'D SEPT. 10-07 FEB.18-08 - - 15" adjustable wagon wrench like Lot 328 above but with a quick adjust handle and disk feature that was patented by William Oliver on Feb. 18, 1908. Good++. (this quick adjust variation not in Schulz)  PAT

0330. PAT'D. NOV. 2, 80 (Thompson's patent) - - 15" wood handled adjustable buggy wench, double head variation. Patented by H. A. Thompson of Farmington, Maine. Good+. (see S204)  PAT

PiCs Lots 321 thru 330

Fence Tools - Part One (lots 331 thru 356)

0331. Unmarked - - 10.25" combination took with a hammer, hatchet, wire cutters, pliers, alligator wrench, leather punch,. etc. Pitted. (Smith No. 10)

0332. J. A. HENCKELS SOLINGEN (with a logo of two stick men) - - 10" combination tool with a hammer, hatchet, wire cutters, pincers, screwdriver, nail claw. Good++, minor pincer jaw chip. (not listed)

0333. Unmarked - - 11" hammer, staple puller and a spring loaded plunger type staple setter. Excellent. (Smith No. 182)

0334. JACOBS / PAT. 1966298 - - 12.25" combination claw hammer, splicing tool and staple puller. Patented July 10, 1934 by Nicholas M. Jacobs of Harlan, Iowa. slightly different than the one pictured in Smith's book. Good+. (Smith No. 177)  PAT

0335. Unmarked - -12.5" hammer, staple puller and a spring loaded plunger type staple setter. Good+. (not in Smith's book)

0336. Unmarked - - 17" fencing tool. Couldn't find in Smith's book. Good++ (not listed, no info found)

0337. Unmarked - - 13" Plier type tool and hammer with a wire cutter. Good++. (Smith No. 78)

0338. PAT. JULY 10, 1934 - JACOBS - HARLAN, IA - - 14" combination fencing tool with a claw hammer, splicing tool and staple puller. Patent granted to Nicholas M. Jacobs of Harlan, Iowa. Good+. (Smith No. 177)  PAT

0339. COMB. WIRE FENCE REPAIRER - PAT. AUG. 31, 09 - - 8" Combination fence tool with a hammer, wire cutter, splicer, staple puller, etc. Patented by Robert C. Johnson of Fort Benton, Montana. Good++. (Smith 50)  PAT.

0340. DUNLAP - - 12.25" all metal combination fencing hammer with staple puller and nail claw. Excellent. (Smith 179)

0341. PATENT PENDING / MADE IN USA - - 11.5" all metal combination fencing hammer with staple puller and nail claw. Good++. (Smith No. 180)

0342. Unmarked - - 13" fence stretcher. Good++. (not in Smith's book but similar to Smith No. 383 ribbon wire stretcher)

0343. Unmarked - - 14" staple puller. Excellent, (Smith No. 119)

PiCs Lots 331 thru 343

0344. PATENT APPLIED FOR - LICENESED FOR USE WITH 4-ONE-BOXES ONLY - - 17" crank type wire twister. Patented as a wire joining tool for wires on boxes, bales, bundles, etc. by Seraphine F. Bauwens of Chicago, IL and assigned to the Wirebound Patents Co. of Maine. Good++. (not listed)  PAT.

0345. T. Culkin - - 8" early wire puller. Good++. (not listed, no info found)

0346. FRANK VOGELZANG - PAT. 6-28-04 - - 11.5" twister type wire tightener patented by Frank Vogelzang of Rock Valley, Iowa on June 28, 1904. Neat and rare. Excellent. (not listed)  PAT.

0347. PAT OCT. ??? (can't read date) - - 11" fence staple puller. Good+. (not listed)

0348. PAT. APL'D FOR / PAT. APL'D FOR - - 9" cast wire twister with a wire cutter. Similar to the Racine twister ( see Lot No. 635) but slightly smaller and has a wire cutter. Also see Smith 160. Good++.

0349. MFD. BY R. L. ORR & CO. LTD. - PITTSBURGH PA / PATENTED - - 9". A thick heavy duty cast combination tool with pliers, wire cutting jaws, hammer head, and wire clamp or tug. It was patented on Nov 13, 1883 by Charles Barr of Pittsburgh, Penn. as a Combination Tool especially for use in erecting fencing. It is not listed in any of the fencing tools books. Good+.  PAT.

0350. Marked only "PATENTS APPLIED FOR - - 10" fence staple puller. Patent issued to George P. Haley of Mexico, Missouri on Mar. 17. 1903. Good++. (Smith No. 203)  PAT.

0351. Marked only PAT. APP'D FOR - - 9" fencing tool with a staple remover, hammer head and nail claw. Similiar but different to the Gore patent combination tool Smith No. 83) Good+. (not listed)

PiCs Lots 344 thru 351

0352. Marked only: PAT. APPL FOR - - 4.5" malleable cast combination saddle fencing tool with a fence tightener and staple puller claw. Similar but much older and rarer than the Atomic saddle fence tool. Patented by James Halstead Birch of Plattsburgh, Missouri on Oct. 2, 1888 and sold by the Birch Mfg. Co. of Granite City, Illinois. Excellent. (Smith 724)  PAT

0353. ATOMIC - GLASKIN MFG - PAT PENDING - - 4.25" malleable cast combination saddle wire tool with hammer, fence tightener, staple puller claw, etc. Patented Sept. 27, 1949 by James B. Glaskin of Colorado Springs, Colorado. Good++, rough casting (Smith 723)  PAT

0354. Unmarked - - 4.75". Similar to the saddle fencing tools above with a fence tightener and staple puller claw,. (Good+. (not listed, no info found)

0355. PAT MAY 27, 1902 - 24 . 25 - - 9.5" wire grip type puller or stretcher. - Excellent.(not listed, no info found)

0356. BOWEN FENCE CO. / NORWALL, OHIO - 2 - - 9" cast fence wire twister. Excellent. (Smith 698)

PiCs Lots 352 thru 356

Cutout Type Wrenches (lots 357 thru 376)

0357. SECHLER (In cutout letters) MOLINE / 1 INCH - - 8". The only buggy wrench with CUTOUT letters. Good+, painted. (S952)

0358. A196-A - DEERE (in cutout letters) - - 8" CUTOUT . Part number runs downward beside large end variant. Good++. (D161)

0359. NOXON (CUTOUT letters) (Noxon Brothers of Ingersol, Ontario, Canada) - - 8" cutout. Severely pitted, painted. (R1-355)

0360. OXO (in cutout letters) - L234 (faint markings) (Noxon Brothers of Ingersol, Ontario, Canada) - - 8" cutout. Like the Noxon cutout wrenches without the two N's. Wrench mounted on the tool box that has the N's. Good++, new red paint. (R1-356)

0361. ZENITH (in cutout letters) - 490 (Unknown origin) - - 10". Same design as the Blount wrench (R1-58). RARE Cutout wrench. Severely pitted. (R1-502)

0362. IRON AGE (in CUTOUT letters) - E39 - (with a "Y" in a triangle logo) (A. B. Farquhar, York, PA and Bateman Mfg. Grenloch, NJ) - - 8.5" CUTOUT with hammer head. Excellent.(R1-260)

0363. CASADAY (in cutout letters) (South Bend Chilled Plow CO.) - - 11.5" CUTOUT. One of the most desirable, largest, and most impressive looking of all the cutout wrenches. At Al Schulz's first auction in October of 1996 the cutout Casaday became the first $1000 wrench, later sales were higher. Condition: Good with some pitting and casting flaws. (R1-429)

0364. COMET (CUTOUT LETTERS) -121C (Peter Hamilton Mfg. Co., Ontario, Canada) - - 6.75" cutout with a small hammer poll. With part number variation. Good++. (R-111)

0365. IHC / 770E - - 10" with CUTOUT IHC logo A hubcap wrench for International Harvester's early high wheel autos and trucks. Rare and desirable IHC wrench. Good++ with weak part number markings, casting flaw on the back side on the edge of large hex opening. (R1-256)

PiCs Lots 357 thru 365

0366. BUFFALO PITTS (PITTS in CUTOUT letters) CO, NY - H - O - (also on the IHC Tool List) - - 10" CUTOUT with hammer poll. Pitted. (R1-68)

0367. REX (CUTOUT letters) - PAT. AUG. 6. 95. - - 5.75"" cast shoe polish brush and shoe polish can opener. Patent granted to William R. Derr of Baltimore, Maryland. Excellent with some of the brush bristles remaining.  PAT

0368. GRANITE STATE (in cutout letters) (Hinsdale, New Hampshire) - - 5.25". Smallest of the CUTOUT wrenches and one of the smallest wrenches found with a hammer poll. Good+ with some light pitting. (R1-207)

0369. ESTATE (in cutout letters) - - 10" malleable stove lifter with cutout letters, open end variant. There are at least four variations of this stove tool. Good+, not cleaned.

0370. Lot of Two: Cutout Type Wrenches
(1.) PLANET JR. (in cutout letters) / 3 (S. A. Allen & Co. - Philadelphia, Penn.) - - 6.25" cutout with a small hammer poll. Good++.
(2.) UNIVERSAL (in cutout letters) - - 4.75" cutout. No part number variation. Good++. (R1-466)

0371. P & O (CUTOUT letters) / 1338 (Parlin & Orendorff later IHC) - - 6" cutout (numbers on back side variation) garden cultivator type. Good+. (R1-370)

0372. P & O (CUTOUT letters) / 1338 (Parlin & Orendorff later IHC) - - 6" cutout (numbers on front side variation) garden cultivator type. Good+. (R1-370)

0373. ALASKA (in cutout letters) / ALASKA (in cutout letters) (unknown origin) - - 11" tack hammer and nail puller. Cutout lettering on handle. Good+.

0374. VERITY (in CUTOUT letters) / P61 (Verity Plow Co. / Massey-Harris) - - 6.25" cutout with hammer poll. Excellent. (R1-472)

0375. PLANET JR (in cutout letters). / K48 - - 5" with a small hammer poll. Smallest of the Planet Jr. cutouts. Good++. (R380)

0376. LITCHFIELD (cutout letters) - S437 (Litchfield Mfg. Co., Waterloo, Iowa) - - 7" cutout. Good+, some pitting, painted. (R1-299)

PiCs Lots 366 thru 376

John Deere and Related Companies Wrenches - (lots 377 thru 399)

Also see Lots 695 and 863 thru 869 for more John Deere Items

0377. S. C. P. Co. (Syracuse Chilled Plow Co., later Deere) - - 10.5". Two sizes on the large open end variation. Good++. (D606, R1-448)

0378. L22 (Deere & Mansur) - - 9" hitch pin with three open end wrench openings and a square socket on end of the pin. Rare John Deere wrench with only two shown on Dill's John Deere Wrench Owner's List. We have never had one to sell before and I have only seen two others, one was broken and the other badly pitted. This one is in Excellent condition. (D406, R1-138)

0379. 157 (Deere & Co) - - 10" Fair, pitting. (D29, R1-130)

0380. Lot of Two: Deere M14 Wrenches (with marking variations) (D421, R1-131)
(1.) M14 - U (Deere / McGee Garden Cultivator) - - 9.5". Good+.
(2.) M14 - X (Deere / McGee Garden Cultivator) - - 9.5". Good+.

0381. JOHN DEERE / KING CORN SILO - 58 - 12.5". Good++. (D14, R1-133)

0382. JOHN DEERE KING CORN SILO - - 4" cast rod lug or coupling. Harder to find than the wrench. Excellent.

0383. Unmarked (Deere C1591R) - - 2.25" socket. Good++. (D275)

0384. JOHN DEERE - TY3167 - USA - 1-5/16 - - 5" 1/2" drive, 1-5/16 12 point socket. Good with chrome plating.

0385. SC / 25 (Syracuse/Deere) - - 6.5" angled square hole variation. Good+. (Dill 530, R1-448)

0386. JOHN DEERE (B353R) - -15.75". Flat shaft, six and twelve point box ends variant. Excellent with most of the original paint. (D248, R1-133)

0387. F. Harrow - KK76 (Deere) - - 18.5". Scarce John Deere wrench in Excellent condition. (D400, R131)

0388. D & M Co. (Deere & Mansur) / B470 - - 13.25". Good++, painted. (D252)

0389. DIXIE MAGNETO (Waterloo Boy / Deere Tractor part #8354) - - 5" loop handle screwdriver. Dill's no. D106 is an unmarked variant of this screwdriver. I suspect this one marked "Dixie Magneto" would be the correct wrench for the Waterloo Boy Tractors. Good+ with light grind marks on tip. (like D106)   PiC Lots 389 Waterloo Boy Screwdriver

PiCs Lots 377 thru 389

0390. Z2 SYRACUSE (Syracuse Chilled Plow Co. / Deere) - - 10.5". Two hammer heads, small end up variation. Good+, no patina. (D553)

0391. Z2 SYRACUSE (Syracuse Chilled Plow Co. / Deere) - - 10.5". One hammer head, small end down variation. Good+, no patina. (D551)

0392. SYRACUSE / IRON & STEEL (Syracuse Chilled Plow Co. / Deere) - - 10". 1-1/4" by 1" hex opening variant. Good+ but bent. (D601,. R1-448)

0393. Lot of Two: Deere Wrenches
(1.) 136 (Deere) / N - - 10.25". Round holes variant. Good+, with some edge dings. (D20, R1-130)
(2.) Unmarked (Deere & Mansur) - - 9.5" similar to the Deere 136 wrench. I have been told this is Deere & Mansur Wrench Number 49 (Dill No. 13). Only one owner shown on Dill's Deere Wrench Owner's List!

0394. Van Brunt / 1911 JD 1986 - - 7". Like Dill's No. 285 but brass plated not brass. Same design as the Van Brunt D380M wrench. Excellent. (see D285, R1-469)

0395. 246 (Marseilles Mfg. Co - Marseilles, ILL. / Deere) - - 5.5" by 12.5" tee wrench. Good. (D51, R1-310)

0396. UNION MAL IRON CO (Union Malleable Iron Co. - Moline, ILL. later John Deere) - - 10.25". John Deere purchased Union Malleable iron Co. in 1911. Straight wrench with good bold markings, no cracks, etc. but there is pitting. (D616, R1-465)

0397. 154 (Syracuse Chilled Plow / Deere) - - 15" with hammer head. Good++. (D27, R1-448)

0398. DEERE A196A / DEERE - - 8". Scarce solid, not cutout with wide letters and reverse markings variation. Good+. (D165)

0399. DEERE / D - PAT APR 28 1903 - - 8.5" Ideal style buggy wrench. Rare 1-1/4" square opening. Good+, with pitting, weak markings. (R1-134, D621)

PiCs Lots 390 thru 399

Coes Key Model Wrenches (lots 400 thru 402)

Three models of Loring Coes last patent granted on Oct. 20, 1903 for a combination screw and wedge adjust wrench.
These are the little brothers to the six foot model we sold at the 2015 Auction for $16,000  PAT

0400. PATENT (rest of markings not readable) - COES WRENCH CO (all markings on upper jaw) - - 48". Second largest Coes Key Model Wrench made, only a few known to exist and this is the first one we have had to list. Good+ with overall light pitting. (different markings than HP60. S854-1/2)

0401. COES WRENCH CO. - WORCESTER MASS. / PATENT APPL'D FOR - - 38.5" (Coes 36" size). Early Coes Key Model Wrench made before the Oct. 20, 1903 patent was granted. Markings are on the shaft below the lower jaw. Good++ (different markings than HP60, S854-1/2)

0402. PAT. OCT 20. 1903 - MADE BY COES WRENCH CO. (markings on upper jaw) - COES (stylized logo) (marked on the adjustment screw strap) - KEY MODEL TRADEMARK (with key logo) (marked on the shaft below the lower jaw) - - 32" (Coes 28" size) Good++. (HP60, S854-1/2)

PiCs Lots 400 thru 402

Adjustable Wrenches - Part Three (lots 403 thru 443)

0403. NO. 5 - ALLIGATOR WRENCH MFD BY ROEBLING -TRENTON, N. J. / PAT. FEB 8, 1898 - - 27". Rare No. 5 alligator wrench. The large No. 5 size is on the "Bucket List" of most alligator wrench collectors. Design patent was issued to Samuel T. Freas of Trenton, NJ. John Augustus Roebling was the engineer who designed and built the Brooklyn Bridge. His company supplied the wire cables for the bridge. Good++ with weak markings. (S2)  PAT.

0404. Unmarked - - 24" odd screw adjust pipe wrench with spring loaded pivoting lower jaw. This looks like an all metal version of Isaiah Cressey's (of Gloucester, Mass.) patent granted on Mar. 07, 1876. Excellent. (C111, see S595)

0405. BYRON JACKSON CO USA - BJ SNAPON - 2-1/2 - - 34" heavy duty self adjusting type wrench. The Byron Jackson Co. of San Francisco, Calif. was founded in the 1880's. They mfg. steam and gas engines, combined harvesters, the Jackson Self Feeder, etc. First one I have seen Good++.

0406. Unmarked - - 38" early adjustable wrench similar to the early key type wrenches but instead of a locking wedge the sliding lower jaw is positioned by placing a pin in one of several holes beneath the lower jaw.

PiCs Lots 403 thru 406

0407. NATHAN M'F'G CO. N.Y. (same markings both sides) - - 15.75". malleable self adjusting wrench with a pivoting hooked upper jaw. The Nathan Co. made train whistles, etc. Good++. (not listed)

0408. MATTHEWS PATENT WRENCH - DENVER, COLO. - - 20" Self adjust nut wrench with pivoting upper jaw. Patented by Edward Matthews of Denver, Colorado. Good++. (marking variation of S355)  PAT.

0409. FALCON - MADE IN USA BY J. H. WILLIAMS & CO - BROOKLYN, NY - US PATS DEC. 3, 1901 - APAP'/ 22, 1902 - - 16" self adjusting wrench. Patents were issued to George Amborn, Jr. and George W. Bufford (both of Brooklyn, NY). First William's Falcon wrench we have listed. Good++, not cleaned. (C336)  PAT. and  PAT.

0410. O. K. TOOL CORP. - 24" / WOODRIVER, NEBR. - PAT. 3,505,914 - - 24" chain type pipe wrench. Patented by Virgil M. Ockinga of Morrill, Nebr. Excellent with former owner's scratched ID "LES R)  PAT.

0411. THE ARMSTRONG NO. 4 - PAT'D MAY 6, 84 / BRIDGEPORT, CONN. - - 21.25" . Rare center screw adjust pipe wrench. Patented by Nathaniel W. Vandegrift of Bridgeport, Conn. Good+ with jaw lip chip, not cleaned. (S584)  PAT.

0412. HAYS - ERIE NO. 3 - PAT'D NOV 10, 03 - - 17" square drive reversible ratchet wrench. Usually found mfg. by the Lowell Wrench Co. Patent was granted to John E. Sinclair of Worcester, Mass. Good++.  PAT.

PiCs Lots 407 thru 412

0413. Unmarked (Wright patent) - - 18" all metal screw adjust pipe wrench with two piece lower jaw. Top jaw has replaceable serrated insert Patented June 30, 1896 and mfg. by Edward Wright (later by Peck, Stow & Wilcox). Scarce large size. Good++. some very light pitting. (similar but with different handle than S642)  PAT.

0414. GENUINE MCKIBB0N (etc.) / PAT. NOS 1872780 - 1730671 - 1709589 - - 18" extra heavy duty adjustable alligator wrench with an unique sliding jaw and adjusting nut action. Made by the McKibbon Universal Wrench Co. of Nashville, Tennessee. Joseph McKibbon of Columbia and Culleoka, Tennessee and later Los Angeles, CA. received three patents for his pipe and nut wrench in 1929 and 1932. Excellent. (S693)  PAT.

0415. 1927 (with logo) - size 18 - THUNDER MFG. CO. - MIS 1.4 - 2" / INAZUMA - SIZE 18" - DROP FORGED - - 16.5" Stillson type pipe wrench. First one seen. Good++. (not listed, no info)

0416. SPERY PIPE TONGS - PAT. JAN 20, 91 - - 23" adjustable pipe wrench. Patent was issued to Charles F. Spery of Hermann, Missouri and mfg. by the Spery Pipe-Tong and Tool Mfg. Co. of Hermann, MO. Good+ with overall light pitting. (S742)  PAT

0417. WILCOX'S PAT. SEPT. 12, 1871 - MF'D BY COLT'S PT.F.A. MFG. CO. HARTFORD, CT. - - 23" screw adjust pipe wrench with a hook jaw. First Colt's Patent Fire Arms Co. wrench we have had to sell. Good++. (not listed)  PAT.

PiCs Lots 413 thru 417

0418. IMP. ANGLE WRENCH - PAT. PEND. / BLOOMINGTON, ILL - - 9" Crescent type with a an adjustable angle head. Mfg. by the Imperial Tool Co. of Bloomington, Indiana and patented by Ransom Bovee of Chicago, Illinois on Nov. 21, 1916. Good+, the adjusting knurl has a few stripped knurls. (S311)  PAT

0419. A??? KINDERMANN - PAT. JAN 25, 1870 (not all letters are readable) - - 12.5" all metal cast self adjusting nut wrench with as screwdriver or pry bar end. Probably earliest example of this type of wrench produced. Design patent was issued to A. Kindermann of Cleveland, Ohio. Good++ with very light pitting. (see S324)  PAT

0420. CRAFT PAT'D (in a diamond logo) - - 10.25" quick adjust nut wrench with a Acme style twist handle. A spring loaded plate locks and releases the lower jaw. Patent date and maker not known. Excellent. (S488)

0421. 12" QUICK RELEASE PAT'D 7-12-04 BEAVER FALLS, PA (can't read all the markings) - - 12.5" odd screw adj nut and pipe wrench pat. by James McQuilkin of Industry, PA. The adjusting screw and upper jaw pivot to grip and release the pipe. Patent states wrench to be used as nut or pipe wrench. This wrench was purchased at the 907 Vern Nail Auction and is the only one I have seen. Rare wrench with overall light pitting, weak markings. (not in Schulz, C218)  PAT

0422. Marked only PAT'D 1879 - - 8" cast hog ringer pliers that formed hog rings from horseshoe nails. Only second one I have seen. Patented by Ozia A. Essig of Canton, Ohio on July 7, 1 879. Excellent.  PAT

0423. ??A??T PAT (can't read most of the markings - - 11.5" heavy duty odd looking self adjusting alligator type wrench with a thumb screw to set the upper jaw. First one I have seen. Good++. (not listed, no info found)

0424. VAN DUIJL'S PATENT No. 2 - MADE BY THOMAS CHATWIN LTD BIRMINGHAM - VAN DUIJL'S PATENT NO. 18926 / 1907 (same markings on both sides) - - - 14" odd adjustable nut wrench. British patent was issued to Jozua Cornelis Hendrikus Van Duijl of Rotterdam, Netherlands on Jan. 09, 1908. Good++ with light pitting.  PAT

0425. BENTON - - 10" turn handle to adjust pipe wrench with serrated jaw inserts and without the quick adjust feature found on some examples. First pipe wrench version I have seen. Excellent with plated finish. (see S477 for nut wrench version)

0426. AMERICAN SAW CO - PATENTED APRIL 8, 1890 - - 15" screw adjust alligator wrench advertised as the "Curtis Pipe Wrench" Rare small size Pat. by Andrew Curtis of Monroe, Maine and mfg. in Trenton, New Jersey. Good++ with some light pitting. (S596)  PAT.

0427. M. M. BUCK MFG. CO. (St. Louis, Missouri) - NO 3 1/4 TO 1-1/2 - COCHRAN'S PAT. OCT. 16, 94 - - 14" odd quick adjust alligator type wrench patented by James M. Cochran of Jackson, Tennessee. Excellent. (S665, C80)  PAT

0428. WEEKS &: WHITNEY WRENCH CO. - SEBAGO LAKE, ME - PAT'D (not all letters are readable) - - 13" screw adjust wrench with two wooden handles. Advertised as to be used on pipe, round stock and carriage bolt heads. Patented by Henry B. Hartford of Standish, Maine on Mar. 20, 1900. Later produced by The New Metal Tool Steel Co - Portland. Maine. Another one we haven't had to list before. Good+ with some dings, replaced wooden handles. (S638)  PAT

PiCs Lots 418 thru 428

0429. U S & M CO (United Shoe and Machine Co) - MADE IN USA - NEWARK N.J. - 10 IN - - 10" curved handle Crescent type adjustable wrench. Good+ with some jaw edge damage. (not listed)

0430. PAT. 4-24-26 - AMER. AUTOM. DEV'S CO. - - 9" unusual automotive type wrench with wooden slab handles and a rotating jaw segment to convert between a nut or pipe wrench. April 24, 1926 is not a patent issue date and I can't find anything about the company. Only second example I have seen. Good++. (not listed, no info found)

0431. TRIUMPH WRENCH- PATENT APPLIED FOR / TRIUMPH WRENCH - - 10" Rare wooden handle version nut and pipe wrench patented Sept. 6, 1892 by George Stevenson of Chicago, ILL. and mfg. by the American Saw Co. of Trenton, NJ. Also advertised as the Stevenson Wrench and the Star Wrench. Excellent, like new. (C39)

0432. THE DUFFEY WRENCH - PATENTED 10" / THE BETHLEHEM WRENCH CO. - BETHLEHEM, PA USA - - 10" odd, complicated looking screw adjust pipe wrench with an unique pivoting jaw assembly. Patent was issued William H. Duffey of South Bethlehem, on Aug. 15, 1911. Excellent. (S625)  PAT.

0433. MADE BY THE LOWNES MFG. CO. - HUNTSVILLE, ALA. / PATENTED APRIL 23, 1889 - FEB 10, 1891 - - 9" all metal pipe wrench with a rotating center section that allows the upper jaw to be inserted vertically or horizontally. Patents issued to Sidney Cook and Phineas Lownes both of Orlando, FL. Mfg. by the Lownes Mfg. Co of Huntsville, Alabama. Good+. (S612)  PAT

0434. VISE GRIP - PAT'D- - 8.75". William Petersen's first model Vise Grip patented Oct. 24, 1921. Made without the locking lever, cast not stamped steel like later models. Good+ with a lip chip. (S262)  PAT.

0435. VISE-GRIP - DEWITT, NEBR. - PAT. APR. 8, 24 - - 9" transition model of Petersen's Vise-Grip with the release lever. Similar shape to the Type Two Vise-Grips with cast upper body but with the newer type release lever connoting bar and a replaceable upper jaw insert (which is missing). Good++ except for the missing upper jaw insert.  PAT.

0436. VISE-GRIP - DEWITT, NEB - PAT. APR. 8, 24 - - 9" early stamped steel version. with the old style hex head adjusting nut. Good++ with an upper jaw chip.  PAT.

0437. VISE-GRIP - DEWITT, NEB - U.S. PAT. NO. 2,280,005 - APR. 14, 1942 - OTHER PAT. PEND. - - 7" early stamped steel version without the quick release lever. Good++.  PAT.

0438. GIRARD STEEL - VISE-GRIP (with shaking hands logo) / PETERSEN MFG. CO. - DEWITT, NEBR. USA - - 12" special purpose Vise-Grip. Good++ with a few nicks on lower jaw edge. (not listed, no info found)

0439. PATD. FEB. 28 82 - HAZELTINE & CHANTRELL- BRIDGEPROR, CONN. (weak markings, not all readable - - 6" tee handled adjustable socket wrench. Patented by Felix Chantrell of Bridgeport, Conn. on Feb. 28, 1882 and reissued on Jul. 04, 1882. Good++. (S918, C162)  PAT. and  PAT.

0440. Unmarked - - 10" caliper type wrench. (Good+. S371 with no info.)

0441. Unmarked - - 11.25" combination plier type tool with a hammer. wire cutter, nail claw screwdriver, etc. Excellent. (not listed, no info found)

0442. UWANTA WRENCH CO - PAT/ 1903 - MEADVILLE, PA - - 810" rare quick adjust version of the Uwanta wood handled nut wrench. Patented 3-17-03 by Edward Smith of Meadville, Penn. Good++, minor dings. (S582, C312)  PAT.

0443. COCHRAN 10 IN - PAT'D 1908 / MODEL 1910 (with an odd logo) - - Modified Stillson type with a patented "rocking collar". The patent was issued to James M. Cochran of Paducah on April 21, 1908. Good+. (S588) PAT.

PiCs Lots 429 thru 443

International Harvester and Related Companies Wrenches (lots 444 thru 494)

0444. IH INTERNATIONAL - 7/8 - 7/8 / 999443R1 - U.S.A. - 7/8 - 7/8 - - 11" combination wrench. Good+.

0445. 5378TM (IHC) - - 7" double socket wrench used on early IHC Titan Tractors and Two Cylinder Gas Engines. Good++. weak markings. (R1-252)

0446. D138 (Chattanooga, IHC, David Bradley) - - 12.75" with disk straightening slot. Excellent. (R1-99)

0447. Unmarked (IHC 529959 single socket wrench and IHC 535409R1 strip-wrench grip) - - 7". Identified by Gil Irps. Excellent, looks like new old stock.

0448. Q5027 (IHC logo) - - 8" chain detacher. Good++.

0449. 102F / (IHC logo) - - 9" (R1-250)

0450. CHATTANOOGA - 3 (later IHC) - - 8.5" with hammer head. Square hole variant. Good+. (R1-98)

0451. INTERNATIONAL HARVESTER CO. (with large IHC logo) - EAGLE LOCK CO. - TERRYVILLE, CONN. USA - - 2.25" rare brass padlock. IHC part No. 2594T used to lock the tool box on early IHC Mogul tractors. Good++ with correct type key but it doesn't open this lock.  PiC Lot 452 - IHC Padlock

0452. NEWELL SANDERS PLOW CO / A163 (later IHC) - - 8.25" with a hammer head. Good++. (R1-351)

0453. SANDERS / B20 (Newell Sanders Plow Co - later IHC) - - 10". Good with some pitting, casting flaw on part number. (R1-411)

0454. SANDERS / A416 (Newell Sanders Plow Co. - Chattanooga, TN - later IHC) - - 13". Good+ with some edge dings. (R1-411)

0455. NEWELL SANDERS PLOW CO / A120 (later IHC) - - 13" with two square and one hex on end. Good+, with slight bend, some pitting. R1-351)

0456. A120 / (no markings on other side (Newell Sanders Plow Co. later IHC) - - 13.25" with a square and open end on end. Good++. (R3-163)

0457. NEWELL SANDERS PLOW CO / A120 (later IHC) - - 13" with 2 square openings on end. Good+. R1-351)

PiCs Lots 444 thru 457

0458. 3613 / P & O CO CANTON ILL- - 12". Good++, painted. (R1-370)

0459. PO209 (with IHC logo) - - 13.5". Number raised, logo indented. Excellent. (R1-254)

0460. 6850H - OIL PAN CAP - RADIATOR CAP - WATER PUMP / VALVE CAP - (IHC logo) - - 11.5". Early 1920's International Truck wrench. Good++, slightly bent. (R1-252)

0461. KENTUCKY DRILLS / BRENNAN & CO LOU. KY. - KR299 (later IHC) - - 8.75". Good+. (R2-230)

0462. KENTUCKY DRILLS / KR299 - - 8.5". Rarer version not marked "BRENNAN & CO LOU. KY". Good+ with some pitting. (R1-62)

0463. E333-1/2 (with IHC logo) - - 12" socket and double spanner "Ram's Horn" wrench. All markings raised. Good+++. (R1-252)

0464. K1500 (Minnie Harvester Co, - St, Paul, Minn. and IHC) - - 8.5". Scarce doe-s wrench. Excellent. (R2-203)

0465. 14-1/2 (Minnie Harvester Co, - St, Paul, Minn. and IHC) - - 8.5" doe-s wrench. Good++, painted. (R2-203)

0466. D138N (Chattanooga, IHC, David Bradley) - - 12.5" with disk straightening slot. Good++. slightly bent. (R1-99)

0467. MCCORMICK (with IHC logo) - - 6.5" doe with 5/8" and 11/16" openings. Excellent.

0468. 1485 (P & O / IHC) - - 12.5". Rare P & O wrench, only third we have had to sell and one of those had a broken jaw. Excellent.

0469. D420 - D. M. O & CO. (D. M. Osborne & Co. - Auburn, NY, later IHC) - - 5". Good++. (R1-363)

0470. CHATTANOO A - 5 (later IHC) - - 9.5". "G" left out and markings on reverse side than normal variation. Good+ with some pitting. (R1-98)

0471. CHATTANOOGA 5 (later IHC) - - 9.5". Good+. (R1-98)

PiCs Lots 458 thru 471

Farm Equipment Type Wrenches - Part Two (lots 472 thru 494)

0472. WHEELER'S NO. 6 CHIEF / SELF RAKE (Cayuga Chief, Osborne, IHC) - - 10.75". Good+ with a tight crack on one edge, other minor edge dings. (R1-486)

0473. F4016 (Oliver) - - 11". Extremely rare Oliver wrench . with a square wrench extension on one side. A F1016 wrench is listed in an Oliver parts book but this is the first one I have seen or heard of. Good++ with some the original paint. (Listed in Rathbone's Supplement but not picture in any of his books)

0474. K. T. & S CO. - K - - 15.5". Good with some pitting. (not listed, no info found)

0475. FLEURY - SULKY AURORA. (J. Fleury's Sons -Aurora, Ontario, Canada) - - 10.75". Excellent. (R1-178)

0476. HERO - 319 / STERLING MFG CO (Sterling, Illinois) - - 13.5". Good++. (R1-439)

0477. PLANET JR. / H4 (S. L. Allen & Co - Philadelphia, Penn.) - - 8" with double hammer polls. Fair, pitting, over cleaned. Variant not marked "USA" not in Rathbone. (see R1-380)

0478. BG126 (Cockshutt Plow Co.) - - 14.25", Impressive looking wrench with a large hammer head. Excellent. (R1-106)

0479. V265A (Canadian McCormick-Deering / IHC) - - 11.25". No IHC logo variation. Good++, not cleaned. (R255)

0480. L-153 (American Seeding Machine Co. - - 8". Very rare wrench that looks like the common IHC U50 wrench. There is also a companion L154 wrench that looks like the IHC U51. Excellent. (R3-7)

0481. AJAX & / SUPERIOR (Rock Island Plow Co.) - - 11.25" longer variant. Good++. (R1-401)

0482. FOUR OAKS / 2 (England)- - 10.5". Excellent, looks like original green paint. (R1-82)

PiCs Lots 472 thru 482

0483. G. A. KELLY PLOW / 1 (G. A. Kelly Plow Co. - Longview, Texas) - - 6.75". Medium pitting. (R1-277)

0484. TIGER (Stoddard - Dayton, Ohio) - - 8" With stud. Pitted, mostly on the back side. (R1-441)

0485. TIGER 240 (Stoddard - Dayton, Ohio) - - 8". Pitted. (R1-441)

0486. TIGER S. D. (J. S. Rowell, Beaver Dam. Wisc.) - - 6.5". Excellent. (R2-252)

0487. CM-356 (Thomas Mfg Co. Springfield, Ohio) - - 9". Scarce wrench in excellent condition with a casting flaw on one jaw ear. (R1-454)

0488. H V McKay / D324 (H. V. McKay / Massey-Harris - Sunshine, Australia) - - 7.25" Deering Type. Good++. (R1-323)

0489. EMPIRE - - 10.75". One jaw ear is missing otherwise excellent. (see R1-164)

0490. E.Q. DUTTON (Cato, NY) - - 10.5". Good++. (R152)

0491. F. RASSMANN MFG. CO. / BEAVER DAM WIS. - P146 - - 7.5" with six openings. First one we have had to list. Excellent. (R1-392)

0492. JOHN P. MANNY (John P. Manny Mower Co. of Rockford, ILL. later Emerson-Brantingham.) - - 12". Good with medium pitting. (R1-309)

0493. GALE / SWIVEL PLOW - - 9". Rare Gale wrench but it is badly pitted. (R1-193)

0494. BURKE HI-TENSILE - - 13.5". Good++. (see R1-72 for a different Burke wrench)

PiCs Lots 483 thru 494

Farm and Miscellaneous Adjustable Wrenches (lots 495 thru 509)

0495. THE MANDT WAGON CO (Stoughton, Wisc.) - - 10" Coes type wood handle monkey wrench. Good with edge hammer damage. (R1-307)

0496. HUDSON & THURBER CO - MINNEAPOLIS, MINN. (later Hudson Mfg. Co.) - - 12" Coes type wooden handled monkey wrench. Good+ with some hammer damage to upper =jaws back face. (R1-243)

0497. LEADALL - - 8" Coes type wood handled monkey wrench. Good+. (not listed, no info found)

0498. ADRIANCE (Adriance, Platt & CO., Poughkeepsie, NY later Moline Plow Co.) - - 10" Coes Type wood handled monkey wrench. Good++. (R1-5)

0499. MOWING MACHINE WRENCH - L. COES & CO / WORCESTER MASS. - PAT'D JUNE 26, 1866 - MAR 23, 1869 (George C. Taft's patents) Good++ with some edge damage. (HP30)  PAT. and  PAT.

0500. NEW I. D. - 32 - - (Monmouth Plow Company's. New I.D. Sulk and Gang Plows) - - 9.75" all malleable rack type quick adjust wrench.. Good+, with some pitting. (S962, R1-335, R3-163)

0501. L320 - L321 (with Plano logo) / PATENT PENDING (Plano Mfg. Co. - Plano, Illinois, later IHC) - - 9" malleable screw adjust nut wrench with hammer head and an open end wrench on end of handle. Excellent except for a couple minor jaw dings. (R1-381)

0502. LOSEE'S CHAMPION (Losee Wrench Works, Corry, Penn.) - - 10" all metal Coes type monkey wrench with a cast handle with a diamond pattern design. The patterned handle gives it a little extra appeal. Only second one we have seen. Good+ with some edge damage. (C204)

0503. WHITELY (Champion later IHC) - - 9.75" all metal Coes style monkey wrench. Note: Same type wrench can also be found marked "Champion". Whitely, Fassler and Kelly were involved in the early history if the Champion Mower & Reaper Co. Good+. (not in Rathbone)

0504. CHAMPION / CHAMPION (marked with large lettering in cast handle) (Champion Mower & Reaper Co. - Springfield, Ohio / Later IHC) - - 10" all metal Coes type monkey wrench. Same wrench design as one found marked "Whitely". Good+ with some edge dings.

0505. MCCORMICK / PAT SEP 7 97 (IHC) - - 8.5" Vandegrift all metal monkey wrench. Good++. (R1-320)

0506. JOHNSTON HARVESTER CO (later Massey Harris) - - 8.5" Coes type wood handled monkey wrench. Some hammer mushrooming. (R1-272)

0507. PAT SEP 7, 97 / 30 - - 9" wood handle version of the Vandegrift patent monkey wrench. Good++. (S966, C313)

0508. CHAMPION (IHC) / GIRARD WRENCH MFG. CO. - GIRARD, PA - - 10" Coes type wood handled monkey wrench. This Girard monkey wrench with the Champion imprint is not on the IHC list. Good+ with some weak markings.

0509. DEERING (in a shield logo) (IHC No. 7694TM) - - 10" Coes type wood handled monkey wrench. Good+, with tight handle crack, top jaw edge squared off.

PiCs Lots 495 thru 509

Adjustable Wrenches and One Humane Chicken Killer - Part 4 (lots 510 thru 530)

0510. Unmarked - - 8.5" example of the LIGHTNING WRENCH mfg. by the Racine Wrench Co. or the L. S. Kellogg Mfg. Co., both of Racine, Wisc. This combination quick and screw adjust Patent was issued to Ebenezer Rider of Racine, Wisc. on Jun. 21, 1892. Good+ with edge hammer dings. (S503)  PAT.

0511. STOVER PIPE WRENCH - PAT PENDG. / CANTON, OHIO - U.S.A. STEEL FORGING - - 10" rack type quick adjust wrench. Rare wrench only third one we have had to sell and first in the 10" size. Schulz pictures one (S723) but without name or place of manufacture. Good++. (S723, C293)  PAT.

0512. MEIER WRENCH - PAT SEPT. 10 89 - - 8" quick adjust nut wrench with unique lever and rack teeth. Patented was granted to John B. Meier of Port Huron, Mich. Never had another to list. Good+ with some edge dings, jaws slightly sprung. (not listed)  PAT

0513. LAGRIPPER WRENCH CO. - BATTLE CREEK, MICH / PAT JUNE 28, 1898 - - 11.25". Quick adjust rack type nut wrench with a handle length release lever. Patent by George Van Schoick of Coldwater, Michigan. Good++. (S688)  PAT

0514. BEMIS & CALL H & T. CO. - SPRINGFIELD, MASS. USA (can't read all the markings) - - 10". Brigg's Apr. 26, 1859 patent type screw adjust nut wrench with long adjusting sleeve and bulbous wooden handle end. Good+ with some edge damage, weak markings. (see S834)  PAT

0515. T. BARNETT - - 12" tong type wrench. Excellent. (not listed)

0516. Unmarked - - 12" wood handled quick adjust combination wrench with nut, pipe and buggy type jaws. One other seen is marked "TRIPL???" with patent dates: June 14, 1887 issued to Rufus B. Marks of Newark, NJ (for the quick adjust feature) and January 20, 1891 and May 24, 1892 both issued to Silvanus Hussey of Brant, NY (which are the same patents used for the Tryon Wrench). Good+. (not listed)  PAT - -  PAT - -  PAT

0517. Unmarked - - 13" High quality rack type quick adjust wrench. Never seen one before. Excellent. (not listed, no info found)

0518. LIND UNIVERSAL WRENCH NO. 2 / PROVIDENCE R.I. - - 14.5" self adjust with a complicated spring loaded upper jaw. Jaws can be positioned in one of three holes in shaft. Patented as a combination pipe wrench and pipe tongs by John Lind of Boston, Mass. on Sept. 8, 1891 and July 24, 1901 Only second one seen and first in this size. Excellent condition.  PAT and  PAT

0519. BEMIS & CALL CO. - SPRINGFIELD, MASS - PAT AUG 1866 ) - - 16" screw adjust pipe wrench with long adjusting sleeve. Amos Call's patent of 8-28-1866 applies. Early B & C wrench in Good+ condition. (S838)  PAT.

0520. PAT JUN 16, 96 - - 13" quick adjust pipe wrench. Another attempt at perfecting the rack teeth type adjustment. Patented as a nut or pipe wrench by Michael W. Ansterburg of Homer, Mich. Good+, minor edge dins, no patina. (not listed)

0521. DICKSON AUTOMATIC - PAT. SEP. 30, 1913 - DICKSON AUTOMATIC - 8 - - 8" quick adjust pipe wrench with a spring wrapped around the upper jaw shaft. Patented by Horace L. Dickson of San Leandro, Calif. Good++. (not listed)  PAT.

0522. BEMIS & CALL CO. - SPRINGFIELD, MASS USA - - 13" wood handled combination nut and pipe wrench with long hex adjusting sleeve. EXCELLENT (not listed, similar to S837 except longer hex adjusting sleeve)

PiCs Lots 510 thru 522

0523. Unmarked - - 10.5" Unusual quick adjust rack type wrench. Handle pivots to lock and release the sliding lower jaw. Knife type handle slabs are made of a phenolic like material. First example seen. Excellent. (not listed in Schulz but the example shown in Wullweber No. 199 is this very wrench)

0524. BRAUNSDORF MUELLER CO. - PAT APPL'D FOR / DUPLEX - ELIZABETH, NJ - - 6.5" Crescent type wrench with a pivoting head with wing nut that sets the head at different angles. Scarce small size. Excellent. (S317, patent not found)

0525. GIRARD SPECIAL - SIZES 6 TO 21 - IN STOCK BY CRERAR ADAMS & CO. - CHICAGO, ILL / GIRARD SPECIAL - - 6" Rare promotional monkey wrench. Good++ with most of the original nickel finish. (not listed)

0526. WESTCOTT / 6 IN - - 6" curved open handled crescent type adjustable nut wrench. pipe jaw insert on the non-adjustable jaw variation. Good++.

0527. PAT'D AUG. 6, '78 - - 9.25".screw adjust malleable nut wrench with a hammer head. Patented by Henry Hill of Moline, Illinois and mfg. by The Moline Malleable Iron Co. - Moline, IL. Good+, rusty, not cleaned. (S958, C166)  PAT

0528. YANKEE / PATENTED DEC. 29, 1885 - - 8.5" all cast fragile looking quick adjust nut wrench with a hammer poll. Patent granted to Robert S. Carr of Hamilton, Ohio and mfg. by Gwinner Mfg. co. also in Hamilton. Very rare, first one we have had to list. (Good++. painted. (S485, C152)  PAT

0529. CHICAGO MALLEABLE IRON CO. / PAT'D SEPT 75 - JUNE 76 - - 10" Patent was granted to Robert Hall McCormick and William R. Baker both of Chicago, Illinois on Jul. 27, 1875 and reissued on Jun. 13, 1876. Excellent. (marking variation not listed)  PAT

0530. Unmarked - - 8" cast aluminum pliers like tool. Identified by markings on one found in the original box as a Humane Chicken Killer made by W. J. Fisher &: Son's of St. James, Man. Canada and Independence, Missouri. Patented was granted May 25, 1937 to William John Fisher and I assume his sons: William Alred Fisher, Alvin Clarence Fisher, Evans Fisher and Victor Hubert Fisher all of Tyvan, Saskatchewan, Canada. According to the patent the pliers is used to pierce the brain of the soon to be Chicken McNuggets thus causing instant death. Excellent, like new.  PAT

Combination Type Wrenches - Part One (lots 531 thru 538)

0531. Unmarked - - 9.25" cast household combination too. Advertised as Heaton's Improved Combination Tool and manufactured by David Heaton of Providence, Rhode Island. Patents were granted on Nov. 12, 1872 to Heaton and on May 09, 1871 to Thomas Garrick, also of Providence. According to the patent the tool has the following fourteen functions: A hammer, nail puller, cover-lifter, scraper, pair of pinchers, which also form an adjustable wrench, gas-burner tongs, nut-cracker and cork-presser, six-inch rule, screwdriver, box opener and a carpet-stretcher. Good++. (S799)  PAT. and  PAT.

0532. Unmarked - - 4.75" combination farrier's tool with hoof pick, screwdriver, hex wrench for horseshoe caulks, etc. Excellent like new with perfect plate finish.

0533. Unmarked - - 8" combination plier type tool consisting of two open end wrenches, cutter, nippers, etc. Patented by George Capewell of Cheshire Conn. on May 16, 1871. Mr. Capewell later founded the Capewell Horse Shoe Nail Company. Poor, pitting, cutter blades missing, screwdriver end broken off. (S811)  PAT

0534. CRONK (Cronk and Carrier - Elmira, NY) - - 6.5" sliding type quick adjust nut wrench with a hex box wrench on the opposite end. Patent issued to William Cronk of Montour Falls, NY on Oct. 22, 1912. Excellent. (see S574)  PAT

0535. LUTHER GRINDER MFG. CO. ( Milwaukee, Wisc.)- DR - - 6.5" cast combination grind stone refacer with three wrench openings. Excellent, like new. (not listed)

0536. Unmarked - - 9" fancy cast household combination tool with a hammer, hatchet nail claw, wrenches, etc. Good++.

0537. Unmarked - - 11.5" combination rack type quick adjust nut and pipe wrench, hammer, nail claw, screwdriver and wire cutter with lever to tighten the jaws and use the wire cutter,. Advertised as Tritt's Lambert Patent by Edward C. Tritt of Union City, Indiana. Patent was issued to Charles M. Lambert of Darke County, Ohio on Nov, 4, 1902. Excellent with most of the original nickel plating. (S806)  PAT

PiCs Lots 523 thru 537

0538. THE - TEDDY / MORRIS-BLODGETT D. F. T. CO. - INDEP, MO - - 9.75" John Morris' The-Teddy combination alligator wrench, hammer and screwdriver. Good with over all light pitting, some weak markings.

Farm Equipment Type Wrenches - Part Three (lots 539 thru 599)

0539. Lot of Three: IHC Wrenches
(1.) CP245 (Oliver and Canadian IHC) - - 9.25" Good. (R1-360, R1-98)
(2.) F354-C / IHC logo) - - 7.75". All markings indented, three square hole variant. Good+. (R1-252)
(3.) 940X (P & O CO / CANTON ILL (IHC) - - 5". Good++. (R1-370)

0540. Lot of Two: Australian IHC Wrenches
(1.) AP146 - 2 - IHC logo - - 9.25". Australian IHC wrench. All markings indented. Excellent .
(2.) AP595 - IH logo) - - 7.5" Australian International Harvester wrench. Good+ with overall casting roughness. (R2-143)

0541. KEYSTONE / U855 (Keystone Mfg. Co. - Sterling, ILL and IHC) - - 10.5". Excellent, not cleaned. (R1-280 )

0542. WHEELERS / SELF RAKE (Cayuga Chief, Osborne, IHC) - - 11". Good+. (R1-486)

0543. P & O CO - 3682 / CANTON ILL (IHC) - - 12" with disk straightening slot. Good++. (R1-370)

0544. V265A (Canadian McCormick-Deering / IHC) - - 12". No IHC logo variation. Good+ with light pitting, poor markings. (R255)

0545. 24 (Newell Sanders later IHC) - - 11" with disk straitening slot. Scarce version not marked "SANDERS", not on current IHC list. Pitting. (see R1-411)

0546. Lot of Two: IHC Related Look-A-Like Wrenches
(1.) P349 - (IHC logo) - - 7.5". Numbers and logo raised variant. Good++.
(2.) 733 (C. B. & Q - Chambers, Bering, Quinlan Co. - Decatur, Illinois, also IHC) - - 7.5". Good++. (R1-73)

0547. PO11 (McKenzie Mfg. Co. - La Crosse, Wisc for No. 5 Planter - also on IHC wrench list) - - 7.5". Three openings plus slot variation. Good++. (R1-254)

0548. PARIS (Paris Plow Co - Paris, Ontario, Canada, also on the IHC list ) / P - - 9.75" Emerson style, four opening variation. Excellent. (R1-368)

0549. Lot of Two: IHC Wrenches
(1.) CP4003 - IHC logo (Chattanooga / IHC) - - 8.5" with hammer head. All markings indented variation. Good++. (R1-98)
(2.) CHATTANOOGA - CP4003 / (IHC logo) - - 8.5" with hammer head. All markings raised. Good+. (R1-98)

PiCs Lots 538 thru 549

0550. S B & CO (Stringer, Barr & Co. - Brooklyn, NY) - - 9". Stringer, Barr & Co evolved into Stringer, Dexter & Coe in 1866.and later became the Munnsville Plow Co. Excellent with better markings than usually found. (see R1-408 and R3-193).

0551. B.F. AVERY AND SONS CO C63 / LOUISVILLE KY USA - - 10" Good++. (R1-27)

0552. A L & CO (orphan) - - 9". Excellent. (not in Rathbone, no info found)

0553. TIGER S. D. (Stoddard, Dayton, Ohio) - - 8.5". Excellent. (R1-441)

0554. TEDDER (orphan) - - 8". Good++. (R1-453)

0555. LOADER (orphan) - - 8". Similiar wrench marked LOADER on one side and TEDDER on other also seen. Some pitting under new paint. (R2-171)

0556. KING DRILL MFG CO (Nebraska City, Nebraska) - - 12". Excellent. (R1-282)

0557. KING PLOW CO / ATLANTA-GA - K55 - - 9". Excellent. (R1-283)

0558. MIDLAND MFG. CO. / 1 - TARKIO MO. USA - - 8.5". Good+, some pitting. (R1-326)

0559. ATHENS PLOW CO / B16 (Athens, Tenn.) - - 12" extra heavy. Good++. (R1-23)

0560. D11 (Long &: Allstatter Co. - Hamilton, Ohio) - - 12.5" disc plow style wrench. Good+ with medium pitting. (R2-172)

0561. DANIEL HARVEY LTD / BOX HILL - MELBOURNE (Australia) - D59 - - 15". Good+, casting roughness, not cleaned. (R2-127)

0562. 3 RIVERS PLOW CO. (Three Rivers, Mich.) - - 10". Rare, first one we have hd to sell. Good++ but is bent, no patina. (R1-454)

0563. EVANS (The Evans Mfg. Co. - Hammond, New York) - - 11". Rare wrench with over all medium pitting. (R2-91)

0564. 35BX (orphan) - - 9.5". Good++. (not listed, no info found)

0565. SEEDER (Seeder Mfg. Co. - Homer, Mich.?) - - 10" doe-S wrench. Good+ with some light pitting. (R1-420)

0566. PRINCESS / PRINCESS (Princess Plow Co. - Canton, Ohio) - - 9.75". Good++. with edge ding. (R1-386)

0567. B. CO. (with a "I" and "M" logo) / 842 (T. E. Bissell - Elora, Ontario, Canada) - - 8.75". Good++. (R1-29)

PiCs Lots 550 thru 567

0568. W & F (orphan) - - 9". Good+, some light pitting. (R1-476 with no info)

0569. TH - BLOUNTS / CULTIVATOR (Blount Plow Works - Evansville, Ind.) - - 7.5" with two heart shaped cutouts. Good++, new black paint. (R1-58)

0570. M. P. CO. - 21 (Munnsville Plow Co. (Munnsville, NY) - - 8.5". Later version of the Stringer, Dexter & Coe and Stringer, Barr & Co. Wrenches. First one I have seen. Good++ with weak markings. (not in Rathbone, see R1-408, R2-210, R3-192)

0571. KGMC (orphan) - - 9.25". Looks like Deere 148 wrench. Painted. (R1-275, no info)

0572. JEWEL - - 8.75". Rare wrench first one we have had to sell but severely pitted, (see R2-150)

0573. REEVES / 3378 (Reeves & Co. - Columbus, Indiana, later Emerson-Brantingham) - - 11.5" Reeves steam engine tractor wrench. Good++. (R1-393)

0574. S. A. LOOSE & SON / 102 - HAMBURG PA. - - 10". Pitted. (R1-300)

0575. WILKINSON PLOW CO TORONTO - 80 - - 11.25". Pitting, no patina. (R1-489)

0576. B. T. BROS. LIMITED - FERGUS - LONDON / 149 (Ontario, Canada) - 11". Excellent but painted. (R1-35)

0577. TOLEDO PLOW CO (Toledo, Ohio) - - 10". Good++, no patina. (R1-456)

0578. BIW (Beatrice Iron Works, Beatrice, Nebraska) - - 10.5". Good++. (R1-34)

0579. BELANGER MONTMAGNY (Quebec, Canada) - 45 (with a star logo) - -10". Good with pitting, mostly on back side. (R1-45)

0580. 5378A - DEANE / OF HOLYOKE (Deane Stream Pump Co. - Holyoke, Mass.) - - 9.25". Good++. (R1-129)

0581. 5471A - DEANE / OF HOLYOKE (Deane Stream Pump Co. - Holyoke, Mass.) - - 8.5". Good+ with some light pitting. (R1-129)

0582. DEANE / OF HOLYOKE (Deane Stream Pump Co. - Holyoke, Mass.) - - 7" open end by hex box. Good+. (not in Rathbone, see R1-129)

0583. DOWAGIAC (Dowagiac Mfg. Co. - Dowagiac, Mich.) - - 5.5". Also found with part number F97. Good++. (R1-149)

0584. DOWAGIAC (Dowagiac Mfg. Co. - Dowagiac, Mich.) - - 9". Also found with part number F97A. Excellent except for tiny casting flaw on jaw edge. (R1-149)

0585. AAP CO / T (Ayr American Plow Co., Ontario, Canada) - - 8.5". Some pitting, painted. (R1-1, R2-1)

PiCs Lots 568 thru 585

0586. 3420 (Monmouth Plow Co. - Monmouth, ILL.) - - 14". Unlisted five opening variation (see Lot No. 134 for six opening variation). Good++ with some edge damage. (five opening wrench not in Rathbone, see R3-157)

0587. LA CROSSE PLOW CO - K29 / (ruler markings) - - 14.25". Square cutout variation. Good with edge damaged, refinished. (R1-289)

0588. DP46 (Cockshutt Plow Co.) - - 15". Good++. (R1-106)

0589. DH29 (orphan) - - 16". Excellent. (not listed, no info found)

0590. W402 (Case T. M. Co., earlier Emerson) - - 17". Good+, minor edge dings, refinished. (R1-163)

0591. B.F. AVERY AND SONS LOU. KY. / E1014 ("V" in an odd shaped logo) - - 18". Large wrench with large, bold markings. Good++. (R1-27)

0592. R & CO. (Robinson & Co, Richmond, Indiana) - 44 - - 10.5", Rare wrench. (R1-398)

0593. K80 (.B. F. Avery & Sons - Louisville, Kentucky) - - 5". Rare Avery Garden Cultivator wrench. Excellent. (R3-14)

0594. 90 (Tudhope Anderson of Orilla, Ontario and Winnipeg, Manitoba, Canada) - - 10.5" neat malleable wrench with a hammer head. Looks like wrench found marked Wilkinson Plow Co. (see R1-489). Good+ with some hammer face damage. (R2-279)

0595. K806 - WILKINSON PLOW CO - TORONTO - - 12". Looks like the same wrench as the Deere K806. Good+ with some edge dings. (R2-297)

0596. RIVAL (orphan?) - - 6". Excellent except for a tiny, tight jaw corner crack. (R2-248)

0597. JAS. EAGEN - 54 - - 5.25". Good++. (not in Rathbone, no info found)

0598. DEMPSTER / 1 (Dempster Mill Mfg. Co, - Beatrice, Neb) - - 7.5". Good++ with yellow paint. (R143)

0599. D. M. M. CO (Dempster Mill Manufacturing Co. - Beatrice, Neb.) - - 12". Excellent,. (R1-143)

PiCs Lots 586 thru 599

Adjustable Wrenches - Part Four (lots 600 thru 622)

0600. UNIVERSAL METAL PRODS - L.A. CALIF. - PATENT NO. 2210274 / 10" DROPPED FORGED - - 9.75" self adjust wrench with spring loaded jaws. Described in the patent as a bolt, nut, and pipe wrench. Patent was granted to Oscar Becklin, Los Angeles, Calif. on Aug. 06, 1940. More often found marked Balin Tool Co. Good+. (not listed)  PAT

0601. STEINADLER NO. 20 - 300 (and star logos) - - 12" quick adjust combination wire cutter and nut and pipe wrench with and a sliding pipe and nut adapter plate on the shaft. Excellent. (S767)

0602. BARWICK WRENCH - PATENTED JUNE 6, 1871 - - 13" plier type nut and pipe wrench mfg. by the Barwick Wrench Co. of Boston, Mass. and later Billings & Spencer. Patented 6-6-1871 by Wm. Barwick. Good++. (S855)  PAT.

0603. TRADEMARK WRIGHT WRENCH CO. (with logo) - WRIGHT WRENCH - TACKOMA, WASH. / PAT 3 - 04 - 1 - 09 - STEEL FORGING - - 12" all metal rack teeth type quick adjust nut wrench. Patented by James F. Wright of Philadelphia, Penn. Also found marked Tacoma, Wash. Good+ with some edge dings. (S543, C342)  PAT.

0604. BARNES PATENT JAN 9, 77 - - 12" different adjustable tong-like wrench with a reversible lower jaw to allow use as either a pipe wrench or pipe cutter. Patented by Elbridge F. Barnes of New Haven, Conn. Excellent. (S7325)  PAT

0605. HASTEE 8" / Label marked: HASTEE - 8 - US PATENT 3,803,954 - DAVENPORT TOOL CO. - ELDRIDGE, IA - - 8" self adjusting wrench. Patent was issued to Paul E. Lenker of Davenport, Iowa on Apr. 16, 1974. Excellent. (S321)  PAT

0606. ALLAN SELF ADJUSTING WRENCH - PATENT PENDING / A. C. ALLAN & CO. - MORRIS, ILL - - 8.5" different self adjust nut wrench. Wrench was patented by Allen C. Allan of Chicago and assigned to William R. Allan, Jr. of Morris, Illinois. Cope has the A. C. Allan Co. located in Chicago not Morris, Illinois. Allan also patented the Kant-Slip pliers made in Baraboo, Wisc. Some light pitting, otherwise Good++. (S322, C35)  PAT.

0607. CYCLOPS WRENCH - - 10". Cast double ended nut wrench with sliding wrench halves positioned by a center set screw (for a one eye effect). Extremely rare and desirable wrench with only a few known examples known. One sold on Wullweber 1998 auction, this may be that wrench. Excellent. condition except the adjustment won't tighten. (not in Schulz, no info found)

0608. 10 - 12 DIAMOND CALK HORSESHOE CO / DAMALLOY logo - with horseshoe logo - - 12" (10" and 12" heads).double ended Crescent type wrench. Rare largest size. Good++ with plating.

0609. WAKEFIELD WIZARD - No. 120 - MADE IN WORCESTER, MASS. - PATENTS PENDING IN USA AND FOREIGN COUNTRIES - - 8" double ended nut wrench with quick adjust sliding jaw. Good++. Patent was granted on 22-21-1922. to Joseph F. Oliver of Worcester, Mass. and assigned to Clarence E. Wakefield also of Worcester. Good++. (S1099, C317)  PAT.

0610. STAR - - 8.5" double headed malleable wrench with a pliers and sliding jaw wrench with a thumbscrew lock like the Buckeye and Belmont wrenches. Mfd. by the U. S. Mfg. Co. - Canton, Ohio. Rare wrench, first we have had to sell. Excellent. (S533)

0611. BUCKEYE - - 9.5" double headed malleable nut wrench with two sizes of Crescent looking wrenches but adjusted by loosening a wing nut and sliding jaw into position. Mfd. by the U. S. Mfg. Co. - Canton, Ohio. Good++. (S303)

0612. Marked only "B" - - 10" same double headed malleable nut wrench as the Buckeye and Belmont. Good++. (see S204 and 304)

0613. BELMONT - - 9.5" malleable double headed nut wrench like Buckeye above. Excellent. (S304)

0614. Unmarked - - 8.5". William Baxter's first model Diagonal Wrench with the round headed thumbscrew made according to his first wrench patent of Feb 12, 1856. Good++. (S461)  PAT

0615. BAXTER'S PAT - FEB 12 - 56 / MFD. BY J. CHAR??? (should be CHARLTON) - NEWARK, NJ (can't read all the letters) - - 10". This is William Baxter's first model Diagonal Wrench with the round headed thumbscrew made according to his first wrench patent of Feb 12, 1856. Different mfg. than seen before. Good++ . (C92, like S461)  PAT

PiCs Lots 600 thru 615

0616. Unmarked (Robinson's patent) - - 5.5" combination adjustable nut wrench, nail claw and hammer. Patented by Sylvanus Robinson of Marshfield, Wisc. on Jan. 26, 1875. Seldom found. Good+.  PAT

0617. Unmarked (Thompson's patent?)- - 13.5" combination monkey wrench and brace. This looks like it is Charles E. Thompson's (of Leesburg, VA) patent issued Feb. 23, 1897. Good++. (not listed)  PAT

0618. Marked only PAT APL'D FOR (McDaniel's patent) - - 8.5" tee handled adjustable socket wrench with a Crescent type worm gear adjustment and one v-shaped jaw and one with a serrated insert. Patented by Charles W. McDaniel of Portsmouth, NH on May 4 , 1909. Excellent. (C216).  PAT

0619. Marked only PAT'D JUNE 16, 1896 (Jaffrey's patent) - - 7" Quick adjust nut wrench attachment for a brace Patent was issued to Henry Coolidge of East Jaffrey, NH. Excellent. (not in Schulz, C132, C17)  PAT

0620. Unmarked - - 10" tee handled adjustable socket wrench. Good with minor dings and nicks. (not listed, no info found)

0621. Unmarked - - 7" cloth tool bag with three adjustable socket wrenches and two rod handles. Mfg. by Hill Pump Valve Co. of Chicago, IL as the "Utility Socket Wrench Set". Patent was issued to Charles A. Olson and Claude H. Toombs both of Geneva, IL. Good++.  PAT

0622. PAT'D. DEC. 10, 78 - MAY 18, 80 - - 15.5" adjustable brace wrench. Promoted in 1883 by Cook and McLane as a "Compound Power" brace wrench. Patents were issued to Joseph Goodrich of Henry, Illinois. Ultra rare and unusual. first we have had to sell. Excellent except for a very tight crack on the wooden grip and a few chips off the pad edges. (C108)

PiCs Lots 616 thru 622

Combination Type Wrenches - Part Two (lots 623 thru 630)

0623. EDWIN LOUDERBACK & CO PHILADELPHIA, PA PATD MAY 1, 1883 / WARRANTED CAST STEEL - - 8.75" (smaller size) combination. tool with at least 10 functions including several plier type tools, punch, hammer, cutter, vise, screwdriver, etc. Patented by Robert Erdman & William Phillips of Philadelphia, PA. Condition is Good+ with some weak markings, the screwdriver bit attachment is missing. (Smith No. 82, S817, C204)  PAT

0624. Unmarked version of the Herkules patent tool advertised as "The Hercules Combination Tool" - - 9.5" with 40 functions, including hammer, hatchet, numerous wrenches, cutters, screwdriver, file, saw, threading dies, two rulers, etc, etc. (must be a nut cracker in there somewhere). The King of Worthless Tools but a Great Collectable Tool. Good with some corrosion. Pivot bolt is a replacement? (patent not found)

0625. Unmarked - - 14" strange combination hatchet tool with a screwdriver, three square wrench openings, pry bar, hammer poll, nail puller, etc. Nail claw, hatchet edge and pry bar end have chips and missing pieces. (not listed, no info found)

0626. MODEL MFG. CO. PHILA. PA - PAT AP'LD FOR (not all these markings are readable) - - 9.5" rare combination tool. An advertisement in Cope's page 222 lists eight functions: nut cracker, nail puller, monkey wrench, hammer, small and large gas pliers, wire cutters and pincers and states "Every part a superior instrument". Only third one I have seen and all the others were 11.5" long. Good, light pitting, weak markings. (C222, patent not found)

0627. Unmarked - - 12.5". This tool which has been a frequent visitor to the What's It's table at tool shows has been identified as a "Breakback Wrench" from a listing in a Dayton-Symons-Superior Catalog for concrete tools, etc. (catalog No. A30, list price $325.08 each!). Good++.

0628. THOMAS M'FG. CO. - DAYTON, OHIO / GUARANTEED FORGED STEEL - - 11.5" comb. fencing tool including hatchet, hammer, alligator wrench, pliers, screwdriver, etc. Good++. (Smith No. 7, S801)

0629. Unmarked - -8" cast multi-wrench with seven square openings. Listed and pictured in a 1900 Fairbanks & Co. catalog as a "Steel Dog Wrench" for lathe dogs and tool posts. Good++. (not listed)

0630. THE THOMAS MFG. CO. - DAYTON, O. USA - PAT. FEB. 11, 1902 - - 9.75" household combination tool advertised as the "Falcon 11 in One Tool" - "The Housewife's Choice". I can see a bottle opener, corkscrew, can opener, jar wrench, screwdriver, etc. Patented by John M. Clark and John C. Crume of Dayton, Ohio. Good++. (not listed)  PAT

PiCs Lots 623 thru 630

Fence Tools - Part Two (lots 631 thru 646)

0631. RIDGELY TRIMMER CO. - PAT PEND / SPRINGFIELD OHIO - PAT PEND. - - 15" wire tightener, cast with a wood handle. One of the neatest fence tools I have seen. Excellent. (Smith #695)

0632. Unmarked - - 5.5" wire tool. (Listed in Smith's book as a "Cast Iron wrapper". Excellent. (Smith #730)

0633. HAYES - PAT'D - H44 - H41 - - 9" cast wire stretcher and splicer. Excellent. (Smith 235)

0634. Unmarked - - 9" wire twister with a stamped steel body similar to Smith's 701 the Brown Fence Co. twister. Good++. (not listed, no info found)

0635. RACINE - April 9, 89 - - 9" cast wire tightener. Patent No. 401004 for a "Wire-Tightener was issued to Hardy W. Campbell of Racine, Wisc. Excellent with some of the original Japan finish. (not in Smith's book)  PAT

0636. Unmarked - - 9" cast wire tightener that looks like patent No. 533066 issued to George R. Kent, Of Elkhorn, Wisc. on Jan. 29, 1895. Painted, pitted. (Smith 159)  PAT

0637. PAT'D / PAT'D - - 11" cast wire tightener. Good++. (looks like Smith #637)

0638. Unmarked - - 13.25" all metal fence tool. Described in Smith's book as a "Long Double Twister". Good+, painted. (Smith #710)

0639. KANAVEL WRENCH CO LTD - KILBUCK, OHIO / PAT FEB 1, 1916 - - 14" quick adjust rack type pipe wrench with a roller bottom jaw that according to the patent doubles as a fence stretcher. Patented by Lyman M. Kanavel of Killbuck, Ohio. Excellent. (not listed)  PAT.

0640. Unmarked - - 7.25" combination tool with a tack claw, small hammer, staple puller and wire splicer? Good++. (not listed, no info found)

0641. DROP FORGED - PATENTED SEPT. 28, 1909 / MINNEAPOLIS, MINN (weak markings , not all readable - - 9.75" all metal combination tool with hammer, pry bar, and an alligator type wrench. Patented by William Carr of Minneapolis. Shorter and with a crow bar end instead of a screwdriver like Carr's patent Lot #643 below. Good. (variant not listed)  PAT

0642. Unmarked - - 11.25" all metal combination fencing tool with a hammer, staple puller, nail claw and alligator wrench. Good+. (Smith 190)

0643. DROP FORGED - PATENTED SEPT. 28, 1909 / MINNEAPOLIS, MINN. - - 13.5" all metal combination tool with hammer, pry bar, ruler markings, and an alligator type wrench. Patented by William Carr of Minneapolis. Good++. (S1044, C90, similar to Smith 190)  PAT

0644. Unmarked - - 7.5" cast fence tool. Identified in Smith's book as a "Pocket Stretcher - Daniel". Excellent. (Smith #234)

0645. Marked only A27 - A29 - - 9.5" heavy cast unusual wire grip. Good++. (not listed, no info found)

0646. Marked only PAT. APR. 23, 01 - - 10.5" pliers with wire cutter, hammer and specialty jaws for wire fencing rings (long nose variant) . Patented by Charles Carter of Rome, Iowa, Good+. (Smith 64)  PAT.

PiCs Lots 631 thru 646

Four Inch Crescent Type Adjustable Nut Wrenches (lots 647 thru 666)

0647. 4 TIGER - DROP FORGED TOOL STEEL / 4 TIGER MADE IN USA - - 4" Crescent type. Tiger was a Gambles brand. Good+.

0648. UTICA TOOLS - UTICA, NY USA / 4 IN. FORGED ALLOY STTEL - - 4" Crescent type Wrench. Excellent.

0649. 2085A DURO - CHROME USA / 4 in. FORGED ALLOY STEEL - - 4" Crescent type. Good.

0650. PENNCRAFT - 4913 / 4 - MADE IN USA - - 4" Crescent type wrench. Excellent

0651. 4in. WIZARD - H2400 / FORGED ALLOY STEEL - MADE IN USA - - 4" Crescent type. Excellent.

0652. 4" MADE IN GERMANY - - 4" Crescent type. Good++.

0653. J. H. WILLIAMS & CO. / "SUPERJUSTABLE" - PAT'D USA - - 4" Crescent type Wrench. Excellent.

0654. 4in. BET'R GRIP - MADE IN USA / 4in FORGED VANADIUM 5/16in. - - 4" Crescent type with a 12 point 5/16" box end wrench for a hang hole. Good+.

0655. Lot of Three: 4" Crescent Type Wrenches
(1.) 704 PROTO
(2.) CRAFTSMAN
(3.) DIAMOND CALK HORSEHOE CO / DIAMALLOY

PiCs Lots 647 thru 655

0656. SNAP-ON TOOLS CORP.- KENOSHA, WISCONSIN / 4" FORGED - BLUE-POINT - ALLOY STEEL - MADE IN U.S.A. - - 4" Crescent type. Excellent,

0657. 4 - G/S (in a hex shaped frame logo) - DROP FORGED TOOL STEEL / 4 - Made IN U.S.A. - G/S (in a hex shaped frame logo) - - 4" Crescent type. G/S was a Gambles Store trademark. Excellent.

0658. 44 - XCELITE - ALLOY / ORCHARD-PARK - NY - - 4" Crescent type. Good++.

0659. 5/16" X 4" ANT (with an ant and two stars logo) / DROP FORGED STEEL - - 4" Crescent Type. Ultra rare four incher. Good++.

0660. Red Devil S&H CO NY USA (in raised oval) - - 4" Crescent type mfd. by The Smith & Hemenway Company which made the Red Devil line of tools, they were purchased by the Crescent Tool Company in 1926. Hard to find four incher. Good++.

0661. 4 IN - P & C in a shield logo (Peterson and Carlborg) 1704-S / 4 IN - FORGED ALLOY STEEL - - 4" Crescent type. P & C was acquired by Plomb in 1941. Excellent.

0662. 4 TIGER - DROP FORGED TOOL STEEL / 4 TIGER MADE IN USA - - 4" Crescent type. Tiger was a Gambles brand. Good++.

0663. 4 IN - GERMANY - - 4" Crescent type with cutout geometric designs on the handle shaft. Good++.

0664. K & B CO. - NEW HAVEN, CT. USA (Kilborn & Bishop Co) / 4IN ADJUSTABLE 22-1/2° - - 4" Crescent type with square hang hole for Prest-O-Lite automobile gas lights. Good+.

0665. P & C in a shield logo (Peterson and Carlborg) 1704-SL FORGED ALLOY STEEL / CLIK-STOP - PAT. NO. 2,905,037 - MFD. USA - - 4" Crescent type. P & C was acquired by Plomb in 1941. The "Clik-Stop" feature was patented by Carl W. Coslow of Los Angeles, Calf. on Sep. 22, 1959. Most found have not been marked with the patent number. Good++.  PAT.

0666. 4in. BET'R GRIP - MADE IN USA / 4in FORGED VANADIUM 5/16in. - - 4" Crescent type with a 12 point 5/16" box end wrench for a hang hole. Good++.

PiCs Lots 656 thru 666

Carriage, Buggy and Wagon Wrenches - Part Two (lots 667 thru 691)

0667. SHELDON AXLE CO / 78 (Sheldon Axle Co., Wilkes-Barre, Penn.) - - 10.25" buggy wrench. Good++. (R2-264)

0668. MILLER'S VEHICLE WRENCH / PATD JAN 27 91 - 2 - - 8.75" scarce large size buggy wrench patented by John A. Miller of St. Louis, Missouri. Good++. (R1-327)  PAT

0669. PAT. APPL' FOR (and a "Z" logo) / 1 (Henry S. Zook - Blue Rock, Penn.) - - 8.25" odd cast buggy wrench patented by James K. Byler and Henry S. Zook (both from Morgantown, Penn. Pitting. (R1-503)  PAT

0670. PAT MAY 2, 1893 (and a "Z" logo) / 7/8 (Henry S. Zook - Blue Rock, Penn.) - - 8.25" odd cast buggy wrench patented by James K. Byler and Henry S. Zook (both from Morgantown, Penn. Excellent. (R1-503)  PAT

0671. IDEAL / PAT APR 28 1903 - "B" - - 8.5" (1-1/8" square nut size) buggy wrench with nut holder. The Ideal Buggy Wrenches were patented by Nathaniel Stone of Outlook, Washington Good++. (R1-246)  PAT

0672. Lot of Four: Buggy and wagon type Wrenches
(1.) F14 (orphan) - - 7" buggy wrench. Light pitting,
(2.) Unmarked - - 9" odd buggy wrench. Good++.
(3.) Unmarked - - 10" buggy wrench. Good+.
(4.) Unmarked - - 12.5" wagon wrench. Good++.

0673. DALZELL & CO. - 20 (South Egremount, Mass.) - - 11.25" wagon wrench. First Dalzell No. 20 we have had to list. Good+, minor dings. (not pictured in Rathbone see R1-123, R3-60)

0674. Unmarked - - 12.5" odd wagon wrench. Good+ with a few dings.

0675. MCFARLAND / C - PATENTED (McFarland Carriage Co. - Connersville, Indiana) - - 7.5" Dayton type buggy wrench. Another rare buggy wrench we have not listed before. Pitting. (R1-321)

0676. ROCK HILL - - 7.5". Rare buggy wrench, first one we have listed. There was a Rock Hill Buggy Co. in Rock Hill South Carolina. Good+ with some pitting. (R1-399 with no info)

0677. E & F - C & D / L562 (with an "A" in a circle logo) - - 7.5" odd wrench? Owner thought it might be a wagon wrench. Excellent. (not listed, no info found)

0678. Unmarked - - 4" clamp type wrench. Looks like it could be a buggy wrench but have seen it advertised as a sparkplug wrench. Excellent.

PiCs Lots 667 thru 678

0679. Marked only "B" - - 9.25" real oddball cast tool with screwdrivers, wrenches with spanner like hooks on one end. There are several variations of this scarce tool. Good++.

0680. PAT'D DEC. 06, 1881 (Brothers patent) - - 10.25" adjustable buggy wrench. Patent for a "Lubricating Wrench" was granted to Oliver Brothers, Jr. of Hartland, Vermont. Wrench has an unique propeller looking thumbscrew on the end that when adjusted allows the lower jaw assembly to be moved into position. Patent shows an oil can on the back side of the wrench but if this one ever had an oil can it's missing now. Ultra rare wrench, first one we have had to list. Good++.  PAT

0681. PAT MAY 9, 1911 (Winchenback patent) - - 11.75" different adjustable buggy wrench with a rack tooth type quick adjusting upper jaw and a lever operating pivoting lower jaw. Patent was issued to Chester Winchenback of Waldoboro, Maine. Rare carriage wrench, only second one we have had to list. Wood spinner knob and wooden insert between the wrench halves have cracks, otherwise Good+. (S235, C338)  PAT

0682. 3190E 14". Wagon wrench? Has hooks that would fit over the spokes, (not listed, no info found)

0683. Unmarked - - 12.5" Combination Boot Jack, Wrench, Hammer and Nail Puller. Excellent.

0684. BOOT JACK - PITTSBURGH NOVELY WORKS - - 13.5" combination bootjack and buggy type wrench. Handy of you need a wrench while taking off your boots. Good++.

PiCs Lots 670 thru 684

0685. JOCKEY - C. J. CAPEWELL OF CHESHIRE, CONN./ CAST STEEL - PATENT APPLIED FOR - - 8". Neat old wing nut adjustable buggy wrench. Patent not found. Good++. (S227)

0686. GRIP PAT. NOV. 12, 1907 - 1-1/8 IN - - 10" rare buggy wrench with a nut holding device. After searching every wrench patent for Nov. 12, 1907, I think this is patent No. 870886 issued to Everell A. Johnson of Mohave City, Arizona Territory. First one I have seen. Excellent. (R1-209 with no info)  PAT

0687. Unmarked - - 7" quick adjust buggy wench with a screw adjusted nut holder. Can't find any info or patent for this one, never seen another like it. Good++. (not listed)

0688. GOODELL CO - ANTRIM NH / PAT NOV 19 1889 (Burleigh's patent) - - 8.5" wooden handled quick adjust buggy wrench with a spring loaded lever and wooden spinner knob. Pat. by Harry Burleigh of Franklin, NH. Excellent. (S233, C144)  PAT

0689. PAT. APPLIED FOR (Wood's patent) - - 11.5" plier like buggy wrench with wooden spinner knob. Patented by George E. Wood of Southington, Conn. on April 4, 1896. Early example without the patent date. Excellent condition with most of the original Japan finish. (S224, R1-377)  PAT.

0690. Marked only 204 and 205 - - 9" spring loaded lever quick adjust buggy wrench with open end wrench on end of handle. Excellent with some of the original Japan finish remaining. (S230B, patent not found)

0691. A. P. JOY (Rockingham, NH) / PAT FEB 1, 98 - NO. 1 - - 10" adjustable wagon wrench. Patent was issued to Adin Phillips Joy of New Market, NH. Good++, not cleaned. (S221)  PAT

PiCs Lots 685 thru 691

Farm Equipment Type Wrenches - Part Four (lots 692 thru 808)

0692. A503 <M-H> - CANADA / PE485 - - 27.5" octagon box end Massey-Harris plow hub wrench. Excellent. (R1-312)

0693. ST. LOUIS TYPE FOUNDRY - - 10.25". Rare wrench. Good+, painted. (R1-434)

0694. 3271 (Gaar, Scott & Co. - Richmond, Ind. later M. Rumely) - - 16" double offset open ended threshing machine cylinder tooth wrench. Good++. (R2-107)

0695. Unmarked (Deere Part No. S5728) - - 27.5" threshing machine cylinder tooth wrench. Good++. (D526)

0696. TIGER - PAT. MAR. 8, 1904 - - 17" threshing machine cylinder tooth ratchet wrench with one hex socket. Patent granted to William R. Johnson of Freeport, Illinois. Complete with the often missing cylinder tooth straightener handle. Good+ with some light pitting. (S45, R1-455)  PAT.

0697. FIRMAN L CARSWELL MFG CO (Kansas City, MO - - 13". Good+ with light pitting, tiny drilled hang hole. (R1-76)

0698. AMERICAN HARROW CO. - DD67 / DETROIT MICHIGAN USA - - 13.75". Good++. (R1-14)

0699. AMERICAN HARROW CO. - DETROIT MICHIGAN / DD198 (American Harrow Co. Detroit, Mich.) - - 14.5". Large hex opening variation. Good++. (R1-14)

PiCs Lots 692 thru 699

0700. Lot of Two: David Bradley Wrenches
(1.) 0566 (David Bradley) - - 13.25" with hook spanner on one end. Good++. (R1-125)
(2.) 832A (David Bradley) - - 13" with hook spanner on one end. Good+ with edge dings. (R1-126)

0701. K35 BRADLEY LISTER - - 6". Severely pitted. (R1-126)

0702. B254 (David Bradley) - - 6" odd socket wrench. Looks like the Bradley 5715A wrench. Excellent. (R1-126, parts list picture only)

0703. DAVID BRADLEY MFG CO / BRADLEY ILL- B238 - - 10". Good+. (R1-126)

0704. Lot of Two: Variation of the Bradley ET wrench. (R1-126)
(1.) ET (marked on end) / 119 (David Bradley) - - 9.75". The numbered washer hanging on this wench indicates it came the 2007 Vern Nail Auction. Good+.
(2.) ET (marked on shaft) - - 9.75". Lighter wrench than above. Good, with pitting.

0705. BRADLEY CULTIVATOR - U12 (David Bradley Mfg. Co. - Bradley, ILL.) - - 9.75". Good++, no patina. (R1-126)

0706. Lot of Two: David Bradley Wrenches
(1.) DAVID BRADLEY MFG WKS / BRADLEY ILL - 105A - - 9.75" with hammer head. Good, overall light pitting, jaw slightly sprung. (R1-126)
(2.) Like wrench above but markings upside down on one side. Good++.

0707. WET (David Bradley) - - 9.75" Emerson type. Good++, painted. (R1-126)

0708. ET (David Bradley or Emerson Talcott) - - 10" Emerson type. Looks like the Bradley "WET" wrench above but a Emerson W1795 wrench has been seen with the "ET" markings (see CB124-1) Good++, painted. (R1-164)

0709. Lot of Three: Bradley Wrenches
(1.) J. H. Bradley (unknown) - - 9" doe-s wrench. Excellent. (not listed, no info found)
(2.) G99 (David Bradley) - - 8.5". Jaw crack, no patina. (R1-126)
(3.) B22 (David Bradley) - - 14.5". Good++. (R1-126)

PiCs Lots 700 thru 709

0710. 123 (David Bradley) - - 7.5". Open loop handle. Good with pitting. (R1-125)

0711. H189 - W. W. CO. (Warsaw Wilkerson - Batavia, NY ?) - - 9". Rarer variant with the part number. Excellent. (R1-478)

0712. FOUR OAKS / 1 (England)- - 8". Good++. (R1-82)

0713. BRINLY PLOW (Brinly, Miles, & Hardy Co. - Louisville, Kentucky) - - 10". Rare wrench. Note: Marked only "Plow" instead of "Plows" like the one pictured in Rathbone's book. Good++. (like R1-64)

0714. KIRLIN / K115 (Kansas City, Missouri & Beattie, Kansas) - - 9". Good++. (R1-285)

0715. 47W (Johnson Harvester, later Massey Harris). Good+, light pitting (R1-272)

0716. D22 (orphan) - - 14". Rathbone's Supplement lists a D22 wrench for Daniel Harvey, Ltd. but no illustration. Good++, not cleaned.

0717. Lot of Two:
(1.) K29 (La Crosse Plow Co. - La Crosse, Wisconsin) / (ruler markings) - - 14.25" Number only variant. Good++. (R1-289)
(2.) MOLINE PLOW CO / B169 (with a "M" in a circle logo) - - 14.25". Good+ but with a weld repair. (R1-332)

0718. DD198 (American Harrow Co. Detroit, Mich.) - - 14.5". Large hex opening, number only variation. Good+ . (R1-14)

0719. D943 (Stoddard) - - 14.25" Good++, painted. (R3-211)

0720. THE F. E. MYERS & BRO. CO. / ASHLAND, OHIO U.S.A. - 3774 - - 14.5". Excellent. (R1-344)

PiCs Lots 710 thru 720

0721. THE INSURANCE / KK.1753 - - 7". May be an E. C. Simmons (KeenKutter) product. Good++. (R1-426)

0722. F2-0005 / MADE IN USA (Oliver and Nichols & Sheppard) - - 8.75" tee socket wrench used on Hart-Carter threshing machine attachments, same as John Deere No. 31. Good++ (R2-217)

0723. D3J31 (Advance-Rumely) - - 6" x 8.75" tee socket wrench. Excellent. (R1-405)

0724. KW (Belcher & Taylor? - Chicopee Falls, Mass.) - - 9.25" tee wrench. Similar looking CW, FW, GW, MW and SW wrenches may be related? Pitted. (R1-46)

0725. B.F. AVERY AND SONS / J97 - - 10", Good+. (R1-27)

0726. B. F. AVERY & SONS / AA38 (Louisville, KY) - - 10.5". Good++. (R1-27)

0727. B.F. AVERY AND SONS - G178 / LOUISVILLE KY USA - T - - 12.5" Good++. (R1-27)

0728. Lot of Two:
(1.) Unmarked (Iron King - Madison, Ohio) - - 7". Pitting, painted. (R1-261)
(2.) BEALL BROS - - 7". Light pitting.

0729. Lot of Six: Smaller cast Wrenches. Will be sold choice wrench
(1.) DOWAGIAC / F97A (Dowagiac Mfg. Co. - Dowagiac, Mich.) - - 5.5". Marked with number variation. Good+. (R1-149)
(2.) WAYNE MFG CO / 24 - - 5.75" doe wrench. Excellent. (R1-483)
(3.) 6 - BAMFORDS / MADE IN ENGLAND - - 6.5". Good++. (R1-39)
(4.) BACKUS MFG CO / WILLIAMSPORT PENN - - 6". Excellent with most of the original Japan finish. (R1-37)
(5.) S & T / S & T (orphan) - - 4.75" fancy malleable cast wrench with five openings. Excellent. (R1-409 with no info)
(6.) FRICK CO 1008B / ECLIPSE 1/4 and 5/16 (Waynesboro, Penn.) - - 5.25". Good+, painted. (R1-185)

0730. LEHR - H (Lehr Co. - Fremont, Ohio) - - 7.25". Good++, painted. (R1-295)

0731. LEHR (Lehr Co. - Fremont, Ohio) - - 9.25" with hammer head. Scarcer no part number variant. Good++. (R1-295)

0732. Lot of Two: IHC Wrenches
(1.) DEERING / HAY RAKE (William Deering & Co. later IHC) - - 6.25". Good+. (R1-139)
(2.) K1166 (Minnie Harvester Co, - St, Paul, Minn. and IHC) - - 6.5". Scarce doe-s wrench. Good++. R2-203)

0733. Lot of Two: Farm Wrenches
(1.) 295 (P & O and IHC) - - 8". Four open ends with straight shaft variation. Good++. (R1-371, parts list illustration only ) .
(2.) 272 (Superior Drill Co. Rathbone also shows the 272 wrench under A, C, Evans and Kingman Plow Co) - - 9.5". Variation with the tab extension on the edge.

0734. SA1406 / (IHC logo) - 12". All markings indented. Good++ with some edge damage. (R1-255)

PiCs Lots 721 thru 734

0735. PARKER PLOW CO (Richmond, Mich.) - - 9.5" Good+. (R1-369)

0736. W. W. CO. (Warsaw Wilkerson - Batavia, NY ?) - - 9". Also found marked with part number H189. Good++, some edge damage. (R1-478)

0737. COCKSHUTT PLOW CO LIMITED - Y - - 11.25". Good with overall pitting. (R1-107)

0738. D. M. SECHLER IMPLT. & CGE. CO. / MOLINE-ILL. - J276 (with a "P" in a circle logo - - 9.5". Good with pitting. (R1-419)

0739. Lot of Two: South Bend Chilled Plow Co. Wrenches
(1.) S. B. C. P. CO. (in logo) (South Bend Chilled Plow Co, South Bend, Indiana) -139 - - 9.25" with hammer head. Usually found also marked "379" which is the correct South Bend part number for this wrench. Good++. (R1-429)
(2.) N. C. / L (New Casaday - South Bend Chilled Plow Co.) - - 12.5" with hammer head. Two open ends variant. Good+. (R1-429)

0740. KFM CO - YORK PA (Keystone Farm Machine Co.) - 7". Good+, some light pitting. (R1-274)

0741. Wilkinson Plow Co - Toronto - 90 / 90- - 10.75" with hammer head. Good++. (R1-489)

0742. W F VILAS COWANSVILLE QUE / 90 - 10.5" with hammer head. Good++, bent. (R1-474)

0743. Lot of Two: W. I. M. Wrenches (Western Implement Mfg. Co. - Kansas City, MO?) (R1-476)
(1.) W. I. M. CO 1906 D70 - - 11". Good+ with some light pitting, minor edge grind marks.
(2.) W. I. M. CO 1906 / V121 - - 11.25". Good with some pitting.

0744. Singer & Co - Coventry - - 6". Good with some pitting. (R2-265)

0745. Marked only "AB" (W. R. Harrison - Massillon, Ohio) - - 7.75" x 6.75" tee wrench. Good++, not cleaned. (R3-103)

0746. TORNADO EF (Tornado Line of W. R. Harrison - Massillon, Ohio) - - 8". Pitted. (R1-220)

0747. Lot of Two: Cast Aluminum Farm Related Wrenches
(1.) DARI-KOOL - - 10.5". Excellent. (R2-60)
(2.) UNIVERSAL HARVESTER CO - WEST MEMPHIS ARKANSAS - STOCKTON CALIFORNIA - - 8" single hex aluminum wrench. Good+. (R1-467)

PiCs Lots 735 thru 747

0748. Lot of Two: Janesville Machine B and Samson Tractor Co. 750367 Wrenches (R2-256)
(1.) Marked only "B" (Janesville Machine Co., Later Samson Tractor Co.) - - 9". Good+.
(2.) 750367 (Samson Tractor Co.) and a "CH" logo - - 9". Replaced the Janesville Machine Co. "B" wrench above after the formation of the Samson Tractor Co. Good++.

0749. Lot of Two: Janesville Machine C and Samson Tractor Co. 752425 Wrenches (R2-256)
(1.) Marked only "C" (Janesville Machine Co., Later Samson Tractor Co.) - - 9". Good+ with some pitting.
(2.) 752425 (Samson Tractor Co.) and a "CH" logo - - 7". Replaced the Janesville Machine Co. "C" wrench above after the formation of the Samson Tractor Co. Painted.

0750. Lot of Two: Janesville Machine and Samson Tractor Co. Wrenches
(1.) 750368 with one dot and a "CH" logo (Samson Tractor Co. - Janesville, Wisc.) - - 9.50". Replaced the Janesville Machine Co. wrench marked "J. M. Co." Good++. (R3-195)
(2.) Marked only "A" (Janesville Machine Co. - Janesville, Wisc.) - - 12.25". Excellent. (not shown in Rathbone but ID from parts list)

0751. Lot of Two: Janesville Machine Co. Wrenches
(1.) SHARES / N167 (Janesville Machine Co. - Janesville, Wisc.) - - 5.5". Good++. (R1-265)
(2.) Crown (Janesville's Machine Company's Crown Mower) - - 7.5". Good++. ( R1-119 under Crown Mfg. Co.)

0752. HAYES - EB315 (Hayes Pump & Planter Co. - Galva, Illinois) / ("A" in a circle logo) - - 4" by 7" tee socket with two hex and one special sockets. Good++. (R1-227)

0753. HARVEY LTD - R173 / BOX HILL - MELBOURNE (Australia) - - 6.5". Good++. (R2-127)

0754. 5015T (Case T. M. Co.) - - 7" key wrench for Case Grain Separator. Good+, some pitting. (R1-81)

0755. Lot of Two: Vulcan Plow Co. Wrenches
(1.) 96 VULCAN PLOW CO / EVANSVILLE, IND - - 10". Good, some pitting, dings. (R1-475)
(2.) VULCAN PLOW CO / EVANSVILLE, IND - - 8". Excellent. (R1-475)

0756. Lot of Two:
(1.) FARQUHAR / YORK PA - - 7" with a small hammer poll. Good+, new paint. (R1-176)
(2.) Jones / D114 Plano logo (later IHC) - - 6.5" Good+. (R1-381)

0757. Lot of Two:
(1.) AVERY / 251 (Avery Co. - Peoria, ILL) - - 7.25". Good++. (R1-26)
(2.) A ELLWOOD - - 6.75" with a hammer head. Good. (R1-161)

0758. FRICK & CO. (Waynesboro, Penn.) / 1064A - 8". Good+ with a casting flaw crack, (R1-185)

0759. Lot of Two: Massey-Harris Wrenches
(1.) Z189 (Massey-Harris) / <M-H> - - 6.5". Good+. (R1-312)
(2.) A23 / <M-H> (Massey-Harris) - - 5.5". Good+. (R2-180)

PiCs Lots 748 thru 759

0760. 2152 (Walter A. Wood) - - 7.25" pitman wrench. Good++. (R1-494)

0761. HAR'KING CO - X (same markings both sides) (Harvest King Co. - Harvey, Illinois) - - 5". Good++. (R1-225)

0762. FULLER & JOHNSON (Madison, Wisc.) / 2P30 - - 9". Two square box opening variant. Good+ with some pitting, painted.(R1-191)

0763. Lot of Two:
(1.) A (Keystone, IHC) - - 7". No logo variant Light pitting, painted. (R1-280)
(2.) OP890 with "E-B" logo (Emerson-Brantingham, previously IHC and Osborne) - - 7.25". Good++, not cleaned. (R1-162)

0764. FLEURY GOOD LUCK AURORA - - 10". Good++ with some light pitting. (R1-178)

0765. FLEURY - GANG - AURORA (Fleury-Bissell - Ontario, Canada) - - 10". Good++, painted. (R1-178)

0766. Lot of Two:
(1.) RODERICK LEAN / DH41 - - 12". Good+. (R1-294)
(2.) 261 MORRISON (Morrison Plow Works - Ft. Dodge, Iowa) - - 11" with hammer head. One end missing, pitted. (R1-340)

0767. ECLIPSE / 1503B (Frick Co. - Waynesboro, Penn) - - 5". Good+. (R1-185)

0768. Lot of Two:
(1.) FULLER & JOHNSON CO. / 2H33 - - 7" by 11.5". Unusual tee shaped wrench. Good++, painted. (R1-191)
(2.) KNOWLTON - - 8.5" with small hammer head and keyhole cutout. Good++.

0769. KOVAR - LINE / OWATONNA - MINN. - - 9". Also found with marked W1. Good+. (R1-287)

0770. Gale / DG92 - - 11.5". Good++. (R1-193)

0771. Lot of Two:
(1.) S329 (Rock Island Plow Co) - - 9.5". Good++. (R1-401)
(2.) K386 (orphan) - - 7.75". Odd with open end, 6 and 8 point box type and spanner pegs. Good+ with pitting. (not listed, no info found)

0772. D C / D C (orphan) - - 9" Good with pitting. (not listed, no info found)

0773. B.F. AVERY & SONS G176 / LOUISVILLE KY USA - - 9". Good+. (R1-27)

0774. B. F. AVERY & SONS - G176A / LOUISVILLE KY USA - - 8.5". Good++. (R1-27)

0775. KINGMAN PLOW CO. (Peoria, IL) / N81 - - 10.75". Good+, slightly bent. (R1-284)

PiCs Lots 760 thru 775

0776. Lot of Two: B. F. Avery & Sons Look-A-Like Wrenches - The "93" wrench replaced the G4 wrench. (see R1-27, parts list illustration only)
(1.) Avery / 93 - - 7.5". Pitted, "93" markings are not clear.
(2.) Avery / G4 (with a cross logo) (B. F. Avery & Sons - Louisville, Kentucky).- - 7.75". Good++.

0777. W M & S No 3 - 7/8 (William Marshall & Sons - Lincolnshire, England) - - 8.5". Marshall made the Field Marshall tractor. Good++ with minor edge damage. (R3-231))

0778. L M CO (orphan) - - 7.5". Good with several nicks and dents, blackened. (not listed, no info found, see R1-289 for other L M wrenches)

0779. ROCK ISLAND PLOW CO / S234 - SULKIES AND GANGS - - 9.25". With hammer poll. Five open ends variant. Good+, painted. (R1-401)

0780. HUDSON G69 (with a "M" logo) (Hudson Mfg. Co., Minneapolis, Minnesota.) - - 5.75". Good++. (R1-244)

0781. 5378A - DEANE / OF HOLYOKE (Deane Stream Pump Co. - Holyoke, Mass.) - - 9.25". There is also a Deane wrench No. 4378. Good++. (R1-129)

0782. WOOD / WOOD (raised, high relief letters) (Walter A. Wood Mower & Reaping Machine Co. - Hoosick, Falls, NY) - - 10" with eight wrench sizes, small hammer poll and two holes variant. Good++, blackened. (R1-494)

0783. 260 FT MADISON PLOW CO - - 10". Excellent but painted. (R1-189)

0784. Black Hawk / SM167 (SD. M. Sechler Carriage & Imp. Co. - Moline, Illinois) - - 10.5". Considerably rarer than the look-a-like Sechler M57 wrench. Good==, blackened. (R1-419)

0785. JWB (Collin's Plow Co's J. W. B. Walking Cultivator, Etc. - Quincy, Illinois) / with a "P" in a circle logo - - 10". Two open ends variant. Good++. (R1-266)

0786. C. D. EDWARDS MFG. CO - 108 / with a "L" in a circle logo - - 11.75". Good++. (R1-159)

0787. DREIS & KRUMP MFG CO CHICAGO ILL - - 12.25". Heavy, thick wrench with six openings. Good+ with some edge damage. (R1-151)

0788. Lot of Two:
(1.) V388 (U. S. Wind Engine & Pump Co. - Batavia, Illinois - - 11". Good++, refinished. (R2-280)
(2.) ED35 (Aspinwall - Jackson, Mich.) - - 9". Good+, very slight bend. (R2-15)

0789. Lot of Two:
(1.) SYRACUSE / LH22 (Syracuse Chilled Plow / Deere) - - 9" with hammer head. Good+, painted. (D420, R1-448)
(2.) RUDE BROS / Liberty Ind. - 7RT - - 6.75" with hammer head. There are several marking variations of this wrench. Good++, painted. (R2-252)

0790. B & H / 1372 (Bickford & Huffman - Macedon, NY) - - 5.75". Good+. (R1-32)

0791. Marked only "C" - - 3.5". This little wrench is pictured in Stoddard parts books but this one is the first one I have seen. Excellent, painted. (parts book illustration only at R2-270)

0792. Lot of Two: Morrison Plow Wrenches
(1.) MORRISON / FORT MADISON (Morrison Plow Works - Ft. Dodge, Iowa) - - 8.25". Good+, blackened. (R1-340)
(2.) MORRISON MF'G CO (Ft. Dodge, Iowa) - - 10". two hole variation. Pitted. (R1-340)

PiCs Lots 776 thru 792

0793. Lot of Three:
(1.) B175A / EMERSON - - 9.25". Good+, darkened. (R1-162)
(2.) VULCAN PLOW CO / EVANSVILLE, IND - - 7.75". Good++, darkened. (R1-475)
(3.) 95 - VULCAN PLOW CO / EVANSVILLE, IND - - 7.25". Good++, darkened. (R1-475)

0794. BW (Frost & Wood) - - 8.5". Good+, some edge damage. (R1-188)

0795. Lot of Two:
(1.) K243 (Kingman Plow) - - 10.25". Good++. (R1-284)
(2.) K190 ( Bateman Brothers, Philadelphia, PA) - - 7.75" single offset open end with open handle. Rare wrench in Excellent condition. (R2-27)

0796. Lot of Two:
(1.) RODERICK LEAN (Mansfield, Ohio) / E6 - - 8.25". Good++, new paint. (R1-294)
(2.) R. I. PLOW CO (Rock Island Plow Co.) / N124 - - 7.75". Good+. (R1-400)

0797. COLLINS PLOW CO / 124 - - 7.25" with a hammer head. Good+ with some pitting, minor dings. (R1-108)

0798. H & D - YORK PA (Hench & Dromgold - York, Penn.) - - 7.25". . Good++. (R1-228)

0799. ERIE GOVERNOR / 1-1/2 to 4-1/2 (Erie Pump & Engine Co. - Erie, Penn.) - - 5". Small doe S-wrench. The other Erie governor wrenches I have seen were marked "1 and 1-1/4". Good++, painted. (see Rathbone R1-167)

0800. Lot of Two:
(1.) NS (Cockshutt Plow Co.) - - 10". Good+, light pitting. (R1-106)
(2.) COCKSHUTT - - 10" flat steel. Good+. (R1-106)

0801. Lot of Two:
(1.) T. M. JARMAIN (Haseley, Oxfordshire, England) - - 9". Severely pitted. (R2-150)
(2.) 234 / K (orphan) - - 9" oddball with seven openings. Pitted. (not listed, no info found)

0802. SATTLEY GOLDEN HARVEST - - 7.75" Good++. new paint. (R1-413)

0803. BEMENT (E. Bement's Sons - Lansing, Mich.) - - 8.75". Good+, no patina. (R1-49)

0804. Lot of Two:
(1.) FP323 (Cockshutt Plow Co.) - - 10". Good+, slight bend. (R2-60)
(2.) LG322 (Cockshutt Plow Co.) - - 10", Good++, darkened. (R1-107)

PiCs Lots 793 thru 804

0805. Lot of Five: Deering Style Wrenches, Will sell choice wrench
(1.) NATIONAL (with a cross logo) - - 7.5" Deering Type with an additional small opening. Good++. (R1-346)
(2.) HARVESTER - - 7" Deering pattern. Pitted. (R1-225)
(3.) HAYES / A116 (Hayes Pump & Planter Co. - Galva, Illinois) - - 7.5" Deering Type. Repaired jaw. (R1-227)
(4.) ARNHOLT - - 7.25" Deering Type. Excellent. (R1-21)
(5.) R. & W. CO. - 6000 / MODEL (Rector & Wilhelmy - Omaha, Neb.) - - 7.5" Deering Type. Zealously cleaned. (R2-242)

0806. Lot of Seven: Small Cast Wrenches. Will sell choice wrench.
(1.) J H CO. / 1090 (Johnston Harvester - Batavia, NY, later Massey-Harris) - - 4.75" single open end. We've sold a couple 1090 wrenches but this is the first one seen with the J. H. Co. imprint. (see R3-120)
(2.) 113 (orphan) - - 4.75" doe with peg on one end.
(3.) A333 (P. P. Mast, later American Seeding Machine Co., later Oliver) - - 4.5". rare Oliver wrench. First one we have had to list. Excellent. (R2-225)
(4.) 884 (Frost & Wood - Smith Falls, Ontario) - - 5". Pitman wrench. Small markings variation. Painted. (R1-188).
(5.) L. M. (orphan) - - 6". Two open wrench ends with a screw driver on the end. Good++. (R1-289, with no info)
(6.) ? XC (orphan) - - 5.5". Good+, can't read first letter. (not listed, no info found)
(7.) N & S - 296 (Nichols & Sheppard, Battle Creek, Mich.) - - 6" rare steam engine set screw wrench, first one seen with the "N S" imprint. Good++. (R1-352)

0807. Lot of Six: Small Cast Wrenches. Will sell choice wrench.
(1.) T175 (orphan) - - 4.5". Good++.
(2.) STERLING / RIGAS - - 4.25" Excellent.
(3.) F-29 (Minnesota Prison Industries - Stillwater, Minn.) - - 4.5" flat steel. Good++. (R3-154)
(4.) EUREKA (Eureka Mower Co., Utica, NY) - - 4". Excellent. (R1-169)
(5.) 206 (orphan) - - 4". Good++.
(6.) L. G. SPENCER (orphan) - - 4". Good+.

0808. Lot of Four: Chilled Plow Type Wrenches. Will sell choice wrench.
(1.) U10 / U (orphan) - - 9.5". Good+. (R1-461).
(2.) B.F. AVERY AND SONS / CHILLED PLOW K209 - - 9.25" Good++. (R1-28)
(3.) OHIO CHILLED / NEW IMPERIAL (B & G Plow Co. - Canton, Ohio) - - 9.5". Good+, painted. (R1-31)
(4.) E13 (Moline Plow Co) - - 9.75". Good with some pitting. (R3-157)

PiCs Lots 805 thru 808

Bicycle and Pocket Wrenches, Etc. (lots 809 thru 849)

0809. STERLING / BUILT LIKE A WATCH - - 5.25" side screw adjust bicycle wrench. Good+ with area of pitting on one side. (not listed, no info)

0810. PREMIER - 7 - POPE MFG. CO. - - 4" side screw adjust bike wrench with sleeve type handle. Made for the Pope Mfg. a pioneer American bicycle manufacturer from Cleveland, Ohio. They later built several different automobiles. Good++. (not listed)

0811. WALD MFG CO - SHEBOYGAN, WIS. - MADE IN USA - - 5" side adjust bike wrench with enclosed adjusting gear. Rare marking variant, usually found marked "MAYSVILLE, KY". Good++, with excellent plated finish. (not listed)

0812. Marked only: PAT AUG. 3, 97 (Tripp's patent) - - 5" combination bicycle or pocket tool with a simple lever and rack quick adjust nut wench, an alligator and bike nipple wrench, ruler and screwdriver. Patented by Ira Tripp of Aurora, Illinois. Advertised as "The Best" wrench by the Best Wrench Company of Chicago, ILL. Good+. (S807, C64)  PAT

0813. MADE EXCLUSIVELY FOR POPE MFG CO / BILLINGS & SPENCER CO HARTFORD, CONN. (with a "B" in triangle logo) / BILLINGS PATENT JAN 15TH, 1895 - - 5.5" bike wrench with an unusual knurled worm gear and rack teeth (on the flat side of the handle) adjustment. Patented by Charles E. Billings of Hartford, Conn. Pope Mfg. was a pioneer American bicycle manufacturer from Cleveland, Ohio. They later built several different automobiles. Excellent. (S111)  PAT

0814. SUPERIOR TOOL CO. - PAT. JAN. 23, 12 - CAMBRIDGE, OH - - 4.5" rare little quick adjust wrench with a lever for final tightening. Patent was issued to Leo S. Whitehead of Wheeling, WV. Excellent. (C293)  PAT

0815. Unmarked - - 1.5" wing nut shaped bicycle spoke or nipple wrench. Excellent.

0816. BAUER'S PAT. MAR. 10, 85 - - 5" two piece handle self adjusting plier type wrench with a pin that fits into one of three holes to change adjusting range. US patent granted Mar. 10, 1885 by John C. Bauer of London, England. Excellent with stamped former owner's ID "EE". (see S333 for a 12" example)  PAT.

0817. "ALDERMAN" / FRANK MOSSBERG CO ATTLEBORO, MASS. - PAT'D. NOV 13, '00 - PAT'D MAR 11, 'O2 (with two Mossberg logos) - - 5.75" side adjust bicycle wrench with tire tool end. Good++. (S868B)

0818. Unmarked - - 5" double ended screw adjust nut wrench. Identical to one seen marked "Duplex - Patent 28054". Good++, small end jaws slightly sprung. (not listed)

0819. BORNSTEIN PAT. JULY 26, 1892 - MADE BY J. A. W. SEABERG MACH. CO. - MALDEN, MASS. - - 5" turn handle to adjust (with a locking collar) bicycle wrench with a hex paneled handle. Patented by Henry Bornstein of Boston, Mass. (S1066, C37, C95, C276)  PAT

0820. Unmarked - - 4.5" rack type quick adjust nut wrench. First one we have had to list. Excellent with former owner's ID of six small punched dots. (not listed no info found)

0821. THE BICYCLE - PAT. APL'D FOR - - 5" all metal loop handled rack type quick adjust bicycle or pocket wrench. Excellent with most of the original plated finish. (S540)

0822. HARDY & CARTER - BOSTON / PAT PENDING - 4.75" double screw adjust pocket wrench advertised as "The Quick Wrench". Patented by Carl Tinglof on July 17, 1894. Good+, some jaw edge damage, has most of the original plated finish. (not in Schulz, see Cope pg 157)  PAT

0823. GEM T & L (Tower & Lyons) - - 4.5" all metal center screw adjust pocket wrench. Good++ with plated finish. (S102)

0824. HEWET LITTLE GIANT - PAT FEB 27, 69 - CHAMPLIN &: SPENCER CHICAGO, ILL. - with ruler scale on shaft - 5" screw adjust bicycle wrench. Actual patent date is Mar 16, 1869, antedated Feb 27, 1869 (issued to Henry Wheaton Hewet of New York, NY). A "Top Shelf" rare bicycle/pocket wrench. Good+, jaws slightly sprung, minor jaw edge damage. (S107B)  PAT

0825. LOWE'S PATENT APRIL 10TH, 1894 / MADE BY BILLINGS & SPENCER (with the "B" in a triangle logo) - - 5.25" complex little wrench with a bottom knurled adjusting nut and a lever that operates a wedge for final tightening. A catch locks the handle to the wrench body. Patent was issued to James A. Lowe of North Branch, NJ. Excellent. (S111)  PAT

0826. HALL WRENCH / PAT'D MAR. 13, 1894 - - 5.5" comb nut and pipe center screw adjust with a pivoting top jaw. The flat sides of the jaws were used for nuts and the sharp back bottom jaw edge for pipe. Patented by Charles Hall of New York, NY and mfg. by Samuel Hall's Sons of New York. Excellent with plated finish. (S1081, C155)  PAT

0827. IVER JOHNSON & CO. MFR'S FITCHBURG, MASS. USA - PAT APPLIED FOR - - 4.5" center screw adjust with a revolving multi-bit screwdriver attachment on end. Patent not found. Good++ with plated finish. (S1052)

0828. J. H. AIKEN / (running rabbit logo) - - 4" with a knurled brass center adjusting sleeve. Mfg. by J. H. Aiken of Franklin, NH. Good+ with jaw edge damage. (S761C)

0829. Unmarked - - 4.25" center screw adjust nut wrench with skeleton handle and ridged adjusting nut. Similar but heavier built than the Peck, Stow & Wilcox's "Star Bicycle Wrench". Good++. (not listed, no info found)

0830. SAFETY - T & L NY (Tower & Lyons) - - 4" center screw adjust bike wrench. Patented July 14, 1891 by John J. Tower of Brooklyn, NY. Good+ with minor jaw edge damage. (S102)  PAT

PiCs Lots 809 thru 830

0831. Lot of Three: Bicycle or Pocket Wrenches
(1.) Marked only GERMANY" - - 6" side screw adjust bike or pocket wrench. Good+.
(2.) Unmarked - - 6" side screw adjust bike or pocket wrench with tire tool on bottom end and screwdriver bit on top end. Good.
(3.) E. C. STEARNS & CO. - SYRACUSE, N.Y. - PAT. AP-LD FOR / WAKEFIELD CYCLE WRENCH - WORCESTER, MASS. - - 5.5" side screw adjust bike or pocket wrench. First Wakefield wrench with the Stearns imprint I have seen. Good+ with drilled hang hole.

0832. MODELE DEPOSE - - 5" double jawed center screw adjust wrench. Excellent.

0833. Lot of Three: Bicycle or Pocket Wrenches
(1.) Marked only PATENT PEND'G - - 5" center screw adjust bike or pocket wrench. Different design. Good++.
(2.) Marked only PAT. APLD FOR - - 6" center screw adjust bike or pocket wrench. Good++.
(3.) BILLINGS & SPENCER CO. - HARTFORD, CONN. / C. E. BILLINGS PAT'D FEB. 18TH, 1879 (with ruler markings on shaft) - - 4.25" center screw adjust bicycle wrench with one side exposed variation. Good++ with punched owner's ID "A. L.".  PAT.

0834. Lot of Four: Smaller Adjustable Wrenches
(1.) TRIMO 6" / PATENTED 1889 - - 6" early Trimont screw adjust pipe wrench. Covered by several patent issued to John H. Vinton of Boston, Mass. Good with areas of pitting.  PAT.
(2.) Unmarked - - 2.75" very small center screw adjust bike or pocket wrench. Good+ with some light pitting.
(3.) Unmarked - - 4" center screw adjust bike or pocket wrench with an open loop handle. Good+, minor dings.
(4.) Marked only PAT. PEND. - - 7" self adjusting wrench with a screwdriver bit on the end of the handle. Looks like the Lake Superior self adjusting wrenches. Good++.

0835. Lot of Three: Alligator Type Wrenches
(1.) UNIVERSAL BOTTLE CAP - GILES CAN CO. - CHICAGO - PATENT APPLIED FOR - - 4.5" combination alligator type lid opener and bottle opener. Good++.
(2.) Unmarked - - 5.75" double ended alligator wrench. Slim design. Good++.
(3.) SURE GRIP / 15 - - 4" single ended alligator wrench with nut wrench cutouts and a screwdriver end. Sure Grip was an E. C. Simmons brand name. Good+.

0836. Lot of Two: Combination Adjustable Bicycle Nut and Spanner Wrenches. Patented by Frederick Schrader of Bridgeport, Conn. on Feb. 20, 1900.  PAT.
(1.) Unmarked - - 6" adjustable bicycle nut wrench and spanner plus a square peg on the back of the fixed jaw. This feature was covered by a design patent issued to Charles H. Metz of Waltham, Mass. on Oct. 18, 1898. Good+.  PAT.
(2.) Unmarked - - 5". Smaller size of Schrader's patented adjustable nut and spanner wrench without the square peg. Good++.

0837. BEAVER - THE BORDEN CO. - WARREN, O / NO. 100 - PAT APPL'D FOR - - 6.5" unusual cast tube cutter and deburring tool. Excellent.

0838. Marked only "M. S." (owner's ID?) - - 4.5". Unusual screw adjust nut wrench with an extra long adjusting sleeve. Excellent. (not listed)

0839. "DOMESTIC" (on the shaft) and PAT'D MAR. 13, 1877 (on cast handle) - - 4.5" combination screw driver with hex wrench opening (two sizes) in the cast handle. Patented by Willis D. Gold of Philadelphia, Penn and mfg. by Henry Disston & Sons also of Philadelphia. Excellent. (S831)  PAT.

0840. U. S. WRENCH CO. - BOHN QUICKFIT - PAT '24 - PHIL. PA - - 5.75" wedge adjust nut wrench. Patent was issued to George Bohn and Fred Werner of Milwaukee, Wisc. on Jan. 22, 1924. Excellent condition with outstanding nickel finish.(S547, C308)  PAT

0841. STILLSON WRENCH - WALWORTH MFG. CO. BOSTON, MASS (with a "W" in on an unidentified tool logo) - - 6" wooden handled Stillson type pipe with a screwdriver bit inside the removable end cap. Excellent with plated finish.

0842. "Victor' Patent" - - 6". Different looking little wrench with the adjusting screw mounted on top of the wench. Rare wrench in Good++ condition. (like "The Victoria", S439)

0843. CLEVELAND 6 IN - PAT. NO. 138173 - OTHERS PENDING - CHROME ALLOY / CLEVELAND WRENCH CO - FORGED IN USA - - 6" self adjust wrench. Patented by Edward Matthews of Denver, CO. ON Jun. 27, 1944. Good++ with plated finish. (S331)  PAT

0844. MEADVILLE WRENCH CO.- MEADVILLE, PA. - - 6" Briggs style all metal nut wrench with short hex adjusting nut and paneled handle. Good++.

0845. BOSTON WRENCH CO BOSTON, MASS. - PAT'D OCT 2, 1906 - - 6.25" all metal quick adjust rack wrench with a sliding lever that locks the lower jaw in position. Patented by Alphage Gagnon of Springfield, Mass. on Oct. 02, 1906. Good+ except an area with pitting. (S480)  PAT

0846. U S & M CO (United Shoe & Machine Co) - MADE IN USA - NEWARK N.J. - 10 IN - - 6" curved handle Crescent type adjustable wrench. Rare small size. Excellent. (not listed)

0847. TRADEMARK WRIGHT WRENCH CO. (with logo) - WRIGHT WRENCH - PAT 3 - 04 - 1 - 09 - STEEL FORGING / WRIGHT WRENCH (plus some unreadable markings) - - 6"" all metal rack teeth type quick adjust nut wrench. Patented by James F. Wright of Philadelphia, Penn. Good++. (S543, C342)  PAT.

0848. Marked only PAT APPLD FOR - - 7" rack type quick adjust with alligator wrench type jaws. Good++. (not listed, no info)

0849. REVERSING SPANNER - NEIL'S PATENT - TEMPERED STEEL - - 7.5" unusual rack type quick adjust wrench with alligator type jaws. First one we have had to list. Excellent. (not listed)

PiCs Lots 831 thru 849

Wrench Books, Farm Literature, Farm Related Collector's Plates (lots 850 thru 862)

0850. Lot of Six: Guide Books on Wrenches and Other Farm Collectibles. Will be sold Choice book.
(1.) VALUE GUIDE OF COLLECTIBLE PLANTER LIDS AND MARKERS by Marvin E. and M. Scott Wilkerson - - Published in 1994, 54 pages. Excellent, like new.
(2.) OF IMPLEMENT WRENCHES AND RELATED MEMORABILIA - BOOK ONE by Nick Jonkman of Wyoming, Ontario, Canada - - No publishing date, 42 pages. Early attempt at identifying farm wrenches, seats and drill box ends. Mostly parts book illustrations with Jonkman's lists of known wrenches. I don't think I have seen this book before. Excellent, like new.
(3.) February 1991 issue of the SMITHSONIAN magazine with the article on tool collectors and their collections .Featuring wrench collector pioneer Elmo Rinehart and his collection. Excellent.
(4.) My First 1000 Wrenches by Donald D. Snyder - - Published in 1990 with 66 pages. Photos and descriptions of the wrenches in Mr. Snyder's collection listed by type. Interesting book on collectible wrenches but it's probably best to ignore his advice on cleaning wrenches in battery acid. Excellent, like new.
(5.) My SECOND 1000 WRENCHES by Donald D. Snyder - - Published in 1992 with 67 pages. Signed by the author. Sequel to Snyder's "My First 100 wrenches". Excellent, like new.
(6.) ANTIQUE AND UNUSUAL WRENCHES by Alfred and Lucille Schulz. - - Absolutely essential book for antique wrench collectors. Wrench collectors frequently refer to the Schulz number when describing a wrench. 1992 revised edition with the extra added pages (92 pages). Excellent.

PiCs Lot 850

0851. HUMMER PLOW WORKS - SPRINGFIELD, ILLNOIS - MANUFACTURERS OF HUMMER SATTLEY FARM TOOLS - EST. 1851 - - Catalog of rotary hoes, plows, tooth harrows, disc harrows, corn planters, cultivators, manure spreaders and farm trucks with full page illustrations. Good++ with small tear on back cover.

0852. OPEN THE DOOR TO THE TIGER LIINE - WORLD'S FAIR SOUVENIOR - ST. LOUIS 1904 / GAAR-SCOTT & CO. - RICHMOND, IND.- - Card is 3.5" x 5.5" and the insert folds out to 5.5" x 8.25". Great adverting card with caricatures of Liberty and Uncle Sam (with a key) and a fold out full color insert showing the Gaar-Scott line of steam engines, threshing machines, saw mills, etc. Card has three small scuffs marks, insert has a tear where it was glued to the inside of the card. PiC Lot 852

0853. ADRIANCE, PLATT & CO. - POUGHKEEPSIE, NEW YORK - - 48 page illustrated catalog of mowers, reapers and binders. Excellent.

0854. Lot of Two:
(1.) PATEE CULIVATORS - The NEW DEPARTURE LINE - PATTEE PLOW CO. MONMOUTH, ILLINOIS - REPAIR LIST NO. 24 - - 39 pages with no illustrations. Strange illustration on back cover of two running horses pulling a cultivator driven by a man in a suit and tie with a suitcase and umbrella tied on behind. Cultivator is running over a small pig! Good++.
(2.) B. F. GOODRICH FARMER'S HANDBOOK AND ALMANAC - 1954 -16th EDITION - - 61 pages with Grange Supply Co., Inc. Tacoma, Wash. imprint. Good++ with minor cover tear.

0855. Approximately 100 pages of several issues of THE FARM IMPLEMENT NEWS magazine with hundreds of great farm equipment ads. One is dated December 1889. Not complete magazines but many interesting ads.

PiCs Lots 851 thru 855

0856. 2" thick binder full of copied wrench and farm related information in sheet protectors. Includes patents, advertisements, farm equipment parts books. catalogs, etc.

0857. Lot of Two: Fordson Tractor Manuals
(1.) FORD TRACTOR WITH FERGUSON SYSTERM INSTRUCTION BOOK - - 11 pages. May be a reprint. Excellent.
(2.) FORD SHOP MANUAL - SERIES 2N - 8N - 9N - - 39 page I & T Shop Manual. Good++.

0858. 1906 - THE IRON AGE WORKS - EST. 1836 LAWN & GARDEN IMPLEMENTS - BAEMAN MFG. CO. GRENLOCK, N. J. - - 64 page fully illustrated catalog (many with wrenches pictured). Imprinted with "The Bacon & Donnovan Engine Co. Agent - Springfield, Mass." Staples have rusted away but pages are in Excellent condition.

0859. Lot of Two: American Grinder Mfg. Co. Black hawk Wrench Catalogs
(1.) BLACKHAWK SOCKET WRENCHES - - 20 page Catalog No. 3 (1919). Fully illustrated wrenches and display boards. Excellent.
(2.) BLACKHAWK WELDED WRENCHES - Supplement to Catalog No. 3 "Showing Special Assortment of Quick Detachable Handles - Sockets - Rim Wrenches and New Wrenches for Fords". 6 pages. Good++.

0860. AMERICIAN HARROW CO. - - Company letterhead dated Nov. 6, 1906 with illustrations for their manure spreader and the factory. Sent to Lars Larsen of Wheelock, ND concerning his recent purchase of his American machine. Excellent.

PiCs Lots 856 thru 860

0861. Lot of 42 FARM COLLECTOR Magazines. 2000 (4 issues), 2001 (11 issues), 2002 (11 issues), 2003 (7 issues), 2004 (8 issues) and 2005 (1 issue). all in Excellent, like new condition.

PiCs Lot 861

0862. Lot of Eight: Limited edition porcelain collector's plates from The Danbury Mint's Farmland Memories series. They are dated from 1993 to 1995 and all marked with the plate number E7618. Included with each plate is a Certificate of Authenticity with the plate number. All are in mint like new condition in their original shipping containers. (original price $32.85 each). will be sold choice plate
(1.) FILL'ER UP - Visible gas pump and Rumely Oil Pull tractor.
(2.) DAYS OF SPLENDOR - John Deere tractor.
(3.) TOPPING OFF THE WAGON - John Deeere combine and Fordson tractor.
(4.) GOLDEN HARVEST - John Deere tractor and corn picker
(5.) PLOWING AT SUNSET - John Deere tractor and plow.
(6.) THRESHER'S HERE - Case steam engine and threshing machine.
(7.) PRAIRIE GOLD - Case steam engine and threshing machine
(8.) THE HAY RIDE - John Deere tractor and hay wagons.

PiCs Lot 862

Misc. John Deere Items (lots 863 thru 869)

0863. 1988X (with a "D" in a circle logo) - - 11" Rare Deere buggy step missing the brass insert with the DEERE markings.

0864. JOHN DEERE - U / J1480H - - 8.5" chain breaker tool. Good+ with some dings. (D-355)

0865. JOHN DEERE (in large letters on front side of block) / Z763H - - 9" riveting block. Good++, not cleaned. (D570)

0866. D98 (Deere New Deal Single Plow) - - 13.5" cast tool box. Piece broken out on the bottom around a bolt mounting hole. (No.28 on Dill's Deere Tool Box List)

0867. GILPIN (in CUTOUT letters) / 132 (John Deere) - - 13.5" Rare cast tool box with cutout letters from a John Deere's Gilpin Sulky Plow. Good+ with some light pitting and a chip off the back side of the bottom ledge, not cleaned. (No. 1 on Dill's Deere Tool Box List)

PiCs Lots 863 thru 867

0868. JOHN DEERE - MOLINE ILL (with leaping deer logo) / Z412H - - 12" cast tool box lid. Excellent, repainted. (No. 71 on Dill's Deere Tool Box List)

0869. UNION MALLEABLE IRON WKS (Deere) - - 3" cast iron horseshoe advertising paperweight. John Deere purchased Union Malleable iron Co. in 1911.Excellent.

0870. PAT. DEC. 10 1867 - - 5" very early cast iron wrench like tool with the correct slotted nut that fits the handle. Patented by Charles L Kingsley of Meriden, Conn. and assigned to Charles Parker also of Meriden. Used to turn the clamp nut on a vise. Excellent.  PAT.

0871. SECURITY STOVE & MFG CO - KC / USE TO HOLD KETTLE UNDER FAUCET (Kansas City, MO) - - 4" cast iron advertising kettle holder. Excellent.

0872. Lot of Four: Small Misc. Wrenches
(1.) SPARK PLUG GAP GAGE .O32 (Scott-Atwater Outboard Motor Co. - Minneapolis, Minn.) - - 6" multi-wrench with four wrench openings, screwdriver, feeler gauge and a compartment with one shim or pin. Good+, some light pitting. .
(2.) KKK - 17 - - 6" soe wrench. Painted.
(3.) FOR USE ONLY WITH / THE PERFECT VALVE SPRING LIFTER - - 3.2" cast soe. Good with pitting on one side.
(4.) 156 (orphan) - - double open end extreme s-wrench. Good+, some light pitting.

0873. Lot of Five: Misc. Wrenches, Etc. Will be sold choice item
(1.) Unmarked - - 9" cast combination tool with hammer, nail or tack claws, etc. Pitted.
(2.) Unmarked - - 4.75" cast wing nut wrench. Excellent.
(3.) Unmarked - - 4.5" combination double open ended wrench and saw blade holder. Excellent but saw blade is missing.
(4.) Unopened package with label that reads: "Quantity - 1, WRENCH, DOUBLE END, Ord.DRG. No. A183908, SNL Stock No. F-209-01-52802, Used on DIRECTOR M5 - M5A1 - M6, Mfg. By THE SINGER MFG. CO., Date Packed Aug,1944" - - 4.25" package length. Wrench made by The Singer Mfg. Co. For the US Military. M5, M5A1 and M6 were WW Two era US Army Tanks. Package is in Excellent condition and I assume the wrench inside is in Excellent. like new condition.
(5.) "THE SUPERRENCH" - 1122 (with Williams' "W" logo) / A183908 CHROME - ALLOY - - 3.75" doe ignition type wrench. WW Two era wrench Made by Williams for the US military with original wrapper and still coated with cosmoline. Note: Same part government part number as the Singer made wrench above. Excellent, like new.

0874. WALLIS / WALLIS (Wallis Tractor Co., later Massey-Harris) - - 5" cast iron bear from the front of a Wallis tractor. Usually found with the rod cut off and used as a paperweight. Excellent.

PiCs Lots 868 thru 874

0875. REGULAR GEAR - No 9 (IHC logo) - - 11.5" stamped steel mower tool box cover. Good++. not cleaned.

0876. McCORMICK - CHICAGO USA / M539 (with a ledger plate logo) - - 10.5" cast tool box lid. Excellent.

0877. McCORMICK (with an IHC logo) / M539 - - 10.5" cast tool box lid. Good++.

0878. NEW IDEAL - - 11.4" stamped steel tool box lid. Good+, not cleaned.

0879. PETER'S PUMP CO. KEWANEE ILL. - PATENTED NOV. 3, 1896 - MAR. 23, 1897 (with a large flower) / K30 - K39 - - 8" cast planter box lid. Excellent.

0880. 1121A (with a large IHC logo) - - 8.75" cast planter seed box lid. Excellent.

0881. BLACK HAWK - THE OHIO CULTIVATOR COMPANY - BELLEVUE, OHIO - E52 - - 9" pressed steel corn planter seed box lid. Excellent.

0882. KINGMAN NO. 4 CORN PLANTER - U258 - - 8" BY 8.5" cast corn planter seed box lid. Excellent.

PiCs Lots 875 thru 882

0883. Marked only L212 (with an "A" in a circle logo) - - 11" cast tool box. Excellent.

0884. Marked only 750 - - 9.75" cast tool box. Good++.

0885. B - I - W - THE BEATRICE IRON WORKS - BEATRICE, NEBRASKA - - 10" cast tool box. Excellent.

0886. ONTARIO / 718 (Ontario Drill Co. - East Rochester, NY?) - - 9" cast tool box with wooden base. One hinge bracket is broken, otherwise Good++.

0887. IHC (in CUTOUT letters) - 156B - IHC logo (International Harvester) - - 12" cast tool box with cutout letters and a high relief ear of corn on each end. Neat tool box in Excellent condition.

0888. BARNES (in large CUTOUT letters) - FREEPORT, ILL - - 10.5' cast tool box. Good++ with a few casting flaws.

0889. DEFIANCE / ND82 (Clipper Plow Co. - Defiance, Ohio?) - - 15" cast tool box. Large, bold markings. Good++.

0890. MANUFMACTIRED BY VICTOR MOWER COMPANY - NIVERVILLE, COL. CO., N.Y. U.S.A. / PAT'D. MAY 1st, 1866 - PAT'D. DEC. 22d, 1871 - - 13" early wooden tool box. Few all wood implement tool boxes have survived. This one is in remarkably good condition for it's age. There are some cracks and chips but most of the original finish and decorative pin striping remains.

0891. Marked only 1693 - - 11.5" cast tool box bolted to cast part 1599 which has adjustment slots for a lever? Excellent, not cleaned.

0892. The "Superior" - B-295 / B294 - - 13" cast tool box with oil can holder. Excellent, not cleaned.

PiCs Lots 883 thru 892

0893. REO T6 / RELIABLE - ELITE MFG. CO. / ASHLAND, O - - 9.5" early cast Reo automobile jack with an adjustable handle extension. Good++.

0894. BLACK HAWK CORN SHELLER - MADE BY A. H. PATCH - CLARKSVILLE, TENN. USA - 1903A - - 12" hand crank corn sheller. Excellent, wooden crank handle is rough, repainted.

0895. E. C. SIMMONS KEEN KUTTER - PAT. MAY 29, 06 (with Keen Kutter logo) / KK12 (with Keen Kutter logo) - - 10" cast clamp on food grinder. Excellent, new paint.

0896. IHC cast screw jack marked with IHC logos and MA3263 (on the base), MA4545 (on the wheel), M3261 (on the top) (Complete Jack is IHC No. 11129K) - - 17" . Rare IHC jack. Excellent, not cleaned.

0897. Lot of Two: Farm Misc.
(1.) Marked only 91 - - 8" garden cultivator attachment.
(2.) 2835? (numbers hard to read) - - 6" clevis and wrench pin. Pitting under new paint.

PiCs Lots 893 thru 897

0898. No. 19230 MFD. BY THE MINNEAPOLIS THRESHING MACHINE CO. - HOPKINS, MINN. / 5841A - 36 x 58 - - 8" X 9.5" cast iron threshing machine identification plate. Excellent.

0899. Unmarked - - 17.5" Cast iron seat with numerous ventilating holes. Identified from a parts list for the York Champion Horse Drawn Dump Rake made by Patten, Stafford, & Myer - Canastota, NY. Excellent.

0900. 75W with IHC logo - - 7.5" x 7.75" cast International Harvester Wagon reach plate. Excellent, not cleaned.

0901. Lot of Three: Clevis or Hitch Pin Wrenches
(1.) 32 (Wheel & Seeder Co., La Crosse, Wisconsin) - - 8.75" cast hitch or clevis pin and three open ended wrench. Pitted. (R1-485)
(2.) 1112 (orphan) - - 8.75" cast hitch or clevis pin with a three open ended wrench. Good+. (not listed, no info found)
(3.) Marked only 2 - - 6" clevis pin wrench. Not cleaned with pitting.

0902. CORMANY MFG. CO. - 1 - CHICAGO, ILL / PAT OCT 22 - 94 - - 6" patented combination locking clevis and pin. Patent was granted to August Morganfield of Ogden, Kansas. Made in at least two sizes. Excellent.  PAT

0903. Lot of Two: IHC Clevis with Pin Wrenches
(1.) 2990 clevis and 2894 wrench pin (P & O, later IHC) - - 6" cast clevis and three opening pin wrench. Excellent. (R1-371)
(2.) 2835 clevis and unmarked wrench pin (P & O, later IHC) - - 5.75" cast clevis and single opening pin wrench. No IHC logo variation. Excellent.

0904. Unmarked - - 10" arrow shaped cast iron plate. May be a corn row marker? Pitted.

PiCs Lots 898 thru 904

Carriage, Buggy and Wagon Wrenches - Part Three (lots 905 thru 920)

0905. 3 IN. PATENTED AUG. 14, 1877 - T. C. MANDT - STOUGHTON, WIS. - - 7.5" X 11" cast iron wagon reach plate, Excellent.

0906. T G MANDT VEHICLE CO - A / STOUGHTON, WIS. - - 6". Small, neat and rare with three open ends, hammer head, square male socket and a screwdriver. Excellent. (R2-177)

0907. T G MANDT WRENCH - PAT JUNE 13 1896 (T. G. Mandt Mfg. Co. - Stoughton, Wis. - later Moline Plow Co.) - - 12.5." wagon hub wrench and hitch pin. Without the star logo variation. Applicable patent was issued to William John Leach of Brighton, Wisc. on Jun. 30, 1896. Good+. (S215, R1-307, C210)  PAT

0908. Marked only PAT APPLD FOR - - 23". old looking oddball with an alligator wrench, four open ends and a buggy type square wrench. Good++ with over all light pitting or casting roughness. (not listed, no info found)

0909. COOK - PATD SEPT 1, 85 / 1 - - 8.75" buggy wrench with a nut holder. 1" size. Patented by Roswell Cook of Ilion, NY. Good++. (S240, R1-112)  PAT

0910. R. F. COOK - PATD SEPT 1, 85 / 1 - - 8.75" buggy wrench with a nut holder. Like above but marked L. F. COOK instead of just COOK.. Good++. (S240, R1-112)  PAT

0911. 1019 (orphan) - - 9.25" odd buggy wrench with large hex opening. Good++.

0912. SHELDON AXLE CO / 79 (Sheldon Axle Co., Wilkes-Barre, Penn.) - - 10.25" buggy wrench. Good++, painted. (R1-423)

0913. SHELDON AXLE CO / 99 (Sheldon Axle Co., Wilkes-Barre, Penn.) - - 10." buggy wrench. Good++. (R2-264).

0914. SHELDON AXLE CO / 87 (Sheldon Axle Co., Wilkes-Barre, Penn.) - - 11". buggy or wagon wrench. Good+. (R2-264)

0915. Lot of Three: Horseshoe Calk Wrenches. Will be sold choice wrench.
(1.) DIAMOND 5-8 and 9-16 (with a horseshoe and diamond logo) / DIAMOND CALK HORSE SHOE CO. - DULUTH, MINN. USA - - 8.5" calk wrench with a hammer head. good with some edge damage.
(2.) 5/8 X 9/16 - THE ROWE CALK CO. (Hartford, Conn.) - 7/16 ZX 1/2 - - 7" double ended calk wrench. First one I have seen. Good++. (not listed)
(3.) NEVERSLIP SQUARE No. 2 - 7/16 - 1/2 / PATENT APPLIED FOR - 7/16 - 1/2 - - 8.75" double ended calk wrench. We have sold two No. 1's but this is the first No. 2 we have had to list. Excellent. (not listed, patent not found)

0916. MOON BROS / C (Moon Buggy Co. - St. Louis, Missouri) - - 7.75". Good++. (R1-337)

0917. MOYER / 224 (H. A. Moyer - Syracuse, New York) - - 8" Buggy Wrench. Excellent. (R1-342)

0918. STUDEBAKER / 7/8 (Studebaker Bros. - South Bend, Indiana) - - 8" buggy wrench. Good+. (R1-444)

0919. Marked with a "SB" logo (Studebaker Bros. - South Bend, Indiana) / 1-1/8 - - 8".5" buggy wrench. Good+. (R2-291)

0920. MOYER / 225 (H. A. Moyer - Syracuse, New York) - - 7.5" Buggy Wrench. Excellent. (R1-342)

PiCs Lots 905 thru 920

Automotive Related Wrenches and Other Tools (lots 921 thru 939)

0921. Lot of Two: Automotive Tools
(1.) BONNEY - BATTERY TERMINAL AND GREASE CUP PLIERS - PAT. FEB. 24, 1920 (with Bonney's shield logo) ) - - 8.75" slip joint plier type tool. Design patent was issued to John Edward Durham, Jr. of Allentown, Penn. and assigned to Bonney Vise & Tool Works. Good++.  PAT.
(2.) 1452 WALDEN WORCHESTER - PAT. PD'G - PAT Oct. 22, 1918 - - 13.5" brace type speed lug wrench with a four socket revolving head. The Oct 22, 1918 patent (issued to Warren S. Bellows of Worcester, Mass.) is for the socket construction, wrench patent was not found. Good with pitting and dings.  PAT

0922. D. F. UNIVERSAL HUB CAP WRENCH / DONAHUE-FISHER CO. - ROCKFORD IL - - 16" cast screw adjust hub cap wrench for hex and octagon hubcaps plus hubcaps that take unusual wrenches. Excellent with some of the original finish.

0923. JOHNSON TIRE TOOL - PAT. DEC. 29, 1914 / DROP FORGED STEEL - TIRE SIZE 3 TO 4 - - 13" tire tool. Patented by Anders Gustav Johnson, of Chicago, Illinois. Good+ with some pitting.  PAT

0924. J. P. TIRE TOOL - YORK, NEB - 1 (with SL in a circle logo) - - 14.75" cast tire tool. Patent granted on Sep 23, 1914 to John P Cunningham of York, Nebraska. Also seen marked "Case Tire Tool Co. - Des Moines, IA" (see R1-78). Excellent.  PAT

0925. BONNEY MOTOR AUTOMOTIVE WRENCH - 12 (with a Bonney shield logo ) / ALLENTOWN, PA - - 10.5" Stillson type all metal pipe wrench. First one seen marked "BONNEY Automotive Wrench", others seen were marked "Bonny Truck Wrench". Good++ except the upper jaw has two edge chips. (like S1104)

0926. AUTO - TRIMO 10 - TRIMONT MFG. CO. - ROXBURY, MASS. USA / TRADEMARK "TRIMO" - ALL FORGED STEEL - CASE HARDENED - PATENTED JULY 19, 1904 - - 10" size nut wrench. The July 19, 1904 patented all metal wrenches have a distinctive slotted shaft on the adjustable jaw. The Auto wrenches are considerably thinner and lighter than Trimont's regular line. Patented by Alfred G. Ely of New York, NY. Good+.  PAT

0927. TRIMO AUTO - 12 - PAT APL'D FOR (etc.) / TRIMO - TRIMONT MFG. CO. - ROXBURY, MASS. - - 11" all metal nut wrench similar to Trimont's regular nut wrenches but thinner with U-shaped nut guard. Patent was issued to John H. Vinton of Boston, Mass. on Dec. 19, 1911. Good+.  PAT

0928. AUTO / Whitman & Barnes logo - -10.25" Coes type all metal monkey wrench, thinner than normal monkey wrenches. Good with some light pitting, grind marks on upper jaw.

0929. COES AUTO (inside a spoked wheel logo) / COES WRENCH CO WORCESTER MASS USA - - 12" all metal screw adjust nut wrench, thinner and lighter than regular Coes wrenches with the adjusting nut enclosed in the lower jaw assembly. Good+ with some hammer damage. (HP62)

PiCs Lots 921 thru 929

0930. VULCAN AUTO TOOL - PATENT PENDG / J H WILLIAMS & CO - BROOKLYN, NY USA - - 7.75" combination tool with at least twelve functions including: a hammer, alligator wrench, screwdriver, bottle opener, etc. Good++. (S66, C337)

0931. PLUMB (with up & down pointed arrows logo) RANGER AT 39 - 11/16 - - 8.5" singe extended box end wrench made by Plumb under contract for the Fairchild Engine & Aircraft Corp. of Farmingdale, New York. Probably WW Two vintage. Excellent.

0932. LIBERTY ENGINE SPARK PLUG WRENCH - - 11.25 " The Liberty engine was a WW One era aircraft engine mfg. by several different companies including Packard, Lincoln, Ford, Cadillac. Buick, Nordyke, and Marmon, etc. Good with light pitting, no patina. (R2-166)

0933. Winton / 17B630 (Winton Motor Carriage Co. - Cleveland, Ohio) - - 9.5" Winton automobile wrench. Good+, no patina. (listed at R1-474 as Vinton vs. Winton)

0934. Lot of Three: Automotive Wrenches.
(1.) 90105 / ("A" in a circle logo) - - 8" combination socket wrench, hammer and tire tool. 1923 Chevrolet Part No. 934502. Good+.
(2.) W. E. ROSEL - COL. O. / 6 IN 1 TOOL - PATD JULY 22, 1919 - -7.5" cast combination tool advertised as "a tool Ford Model "T" owners cannot be without". For spark plugs and several other adjustments; ignition gap gauge, screwdriver and alligator wrench. Design patent was granted to William E. Rosel of Columbus, Ohio. Good+.  PAT
(3.) CTK MFG CO (Chicago Tool Kit Mfg. Co.) / SP60 - - 8.25". Good+, slight bend. (see R2-106)

0935. Lot of Four: Automotive Type Wrenches. Sell Choice Wrench
(1.) EE & CO. 21 - - 9.75" cast Ford after market wrench for hub caps, etc. Good++.
(2.) BUCKEYE - - 9.25" after market Ford type spark plug and cylinder head bolt wrench. Good+. (also see R1-68)
(3.) W685 (orphan) - - 10" cast hub cap type wrench. Good++ but the open jaw has been modified.
(4.) W692 (orphan) - - 13.5" hub type wrench. Excellent.

0936. THE HANDEE - PAT APPL'D / MANSFIELD OHIO - 8" dog bone revolving head multi-socket wrench. Longer variant. Good+, no patina. (S289)

0937. D1102E (orphan) (poor casting on the "0" may not be correct number) - - 13" cast wrench with large hex box opening and unusual end with three tabs. I don't know if this wrench is farm or automotive related but it is a neat looking hub cap type wrench. First one we have had to sell. Good++ with overall light pitting or casting roughness. (not listed, no info found)

0938. FAIRBANKS-MORSE & CO. - - 15.5" double open ended gas engine wrench. Largest Fairbanks-Morse wrench I have seen. Excellent with some of the original finish. (See R2-98)

PiCs Lots 930 thru 938

0939. THE BISHMAN CO. - UNIVERSAL HUB CAP WRENCH - MPLS MINN - PAT PEND. - - 15" adjustable hubcap wrench fits all hexagon and octagon hubcaps plus several requiring a special wrench such as Packards, Whippets, Willys, etc. Patent was issued to Walter A. Bishman and Harold G. Lien both of Minneapolis, Minn. Good++ with some dings on one side of one handle.  PAT.

Assorted Wrenches and Tools (lots 940 thru 970)

0940. Lot of Three: H. D. Smith Perfect Handle Tools. All with wood knife type handles.
(1.) 8" Crescent type adjustable wrench. Adjustable jaw teeth are striped.
(2.) 12.5" valve lifter tool. Good+, no chain.
(3.) 10" monkey wrench. Good++.

0941. Unmarked, (as usually found but a few have been seen marked REED MFG. CO. - ERIE, PA USA - GUARANTEED) - - 5.5" turn handle to adjust nut wrench with bulbous handle, closed frame variation. Good+, minor dings. (not listed)

0942. Lot of Three: Crate or Box Tools. Will be sold choice tool.
(1.) TOMAHAWK JUNIOR / BRIDGEPORT HDW. CORP. - - 9" all metal crate tool with hatchet, hammer, pry bar with nail claw. Excellent.
(2.) BABY TERRIER - WARANTED STEEL / THE BRIDGEPORT HDWE MFG CORP - MADE IN USA - - 6.75" box or crate tool. Good++.
(3.) B. R. MFG. CO. (Beckley-Ralston Co.?) - CHICAGO / COMPLEMENT OF KELLOGG TOASTED CORN FLAKE CO. - - 9.75" box or crate tool with hammer, nail claw and arrow shaped pry bar. Good+ with some dings.

0943. "VICTOR" TRADEMARK - PAT. DEC 23, 1902. PAT. - PAT. AUG 25, 1903 - - 10.75" quick adjust pipe wrench made by the Bonner Mfg. Co. of Chrisman, ILL. and patented by Clarence E. Bonner, Cherrypoint, IL. Good+ with minor hammer dings. (S653)  PAT

0944. Lot of Four: Emerson Type Wrenches. Will be sold choice wrench.
(1.) EMERSON - - 10". Excellent.
(2.) HALL (in a diamond logo) J1 (Hall Mfg. Co. - Monticello, Iowa) / (Illinois Malleable Iron Co's logo "IM") - - 10". Excellent. (R1-213)
(3.) 100 (orphan) - - 10". Good+.
(4.) W1795 / E-B logo (Emerson-Brantingham ) - - 10". Good+. (R1-162).

0945. BARNES TOOL CO. / PAT'D 1886 - IMP'D 1892 - DROP FORGED STEEL - - 5.5" all metal Coes type screw adjust nut wrench with unique split handle. Patented by John Ryan of New York, NY on 4-3-1886 and 5-31-1892. Good++. (S101)  PAT and  PAT

0946. THE JOHNSTON AUTOMATIC - PAT JULY 30, 1895 - - 14.75" self adjust with pivoting upper jaw. Mfg. by W. T. Johnson & Co. New York and patented by Walter Johnston of Macon, Georgia. Good+ with spots of minor pitting, weak markings. (S336)  PAT.

PiCs Lots 939 thru 946

0947. ATLAS 10 - PAT 1888 - - 10.5" with a moveable upper jaw that can be adjusted to three different positions. Patented May 15, 1888 by Robert Copland of Eureka, Calif. and made in San Francisco, Calif. and New York, NY. Excellent except for a lip chip. (S655)  PAT.

0948. WARNOCK / PAT JUNE 5 1900 - WORCESTER MASS - - 11.5" malleable strap wrench. Patented by Amos W. Warnock of Boston, Mass. Also found marked PAT FEB. 18, 1919. Wrench and strap are in Excellent condition with large bold markings. (S139)  PAT

0949. F. W. MACKE & CO QUICKSET WRENCHES - KOKOMO, IND (with a "L" in a circle logo) / PAT'D APRIL 22 - 1919 - - 10.25" wood knife handled screw and quick adjust nut wrench. Patented by Joseph Nielander of Kokomo, Indiana. Good with several nicks and dings and light grind marks, spring is broken or missing. (S511)  PAT

0950. THE GEM - FORED TOOL STEEL - - 11" all metal double jaw automotive type adjustable wrench with nut and alligator type pipe wrench jaws and a tire tool end. Good+. (S58)

0951. P & C (Peterson and Carlborg) - 1234 - MFG. USA - PAT. No. 2600512 - - 7.75" different groove joint pliers. Patented by Homer A. Mead of Turlock, Calif. I think there are four or five different manufactures of this pliers. Excellent with plated finish. (S234)  PAT

0952. H. D. S. & CO. - PLANTSVILLE, CONN. USA / PERFECT HANDLED PATENTED - - 8.75" screwdriver with a wooden knife type handle. Advertised by H. D. Smith as a "Three Bit Screwdriver". Good+.

0953. L. S. KELLOGG MFG CO RACINE, WIS - - 8.75" combination screw and quick adjust advertised as the "Rider Patent Lightning Wrench". Knurled adjusting nut is pulled outward to release rack teeth and spring loaded lower jaw assembly. Patent was issued to Ebenezer Rider of Racine, Wisc. on June 21, 1892. Good+. As usual there is a tiny crack in metal where stop screw hits, edge hammer ding, light markings. (S503, C188)  PAT.

0954. SUPER SERVICE MFG CO - KC MO - PAT PEND - - 8.75" turn handle to adjust nut wrench similar but considerably rarer than the Kansas City Boos wrenches. Good++. +(S382)

0955. Lot of Two: NEVERSLIP - PATENTED AUG. 17, 1897 - - 9" Horse shoe calk wrenches. Patented by James Johnson of New Brunswick, New Jersey. Both are in Excellent condition. (S887)  PAT.
(1.) Small markings variation.
(2.) Large markings variation.

0956. THE ROBERTS WRENCH CO. INC. NY / PATENTED & PATENTS PENDING - - 13" self adjust wrench with spring loaded jaws. Same Feb 21, 1922 Frederick Robert patent as the Hoe wrenches applies. Excellent except for a minor jaw chip. (S360)  PAT

PiCs Lots 947 thru 956

0957. C28 (David Bradley) - - 17.25". Good+, some pitting. (R1-126)

0958. F163 (Oliver) - - 7" Good++, older paint. (R1-360)

0959. Avery 5 / Avery (Avery Co. - Peoria, Illinois) - - 7.25". Rare Avery wrench. Good+, some light pitting. (R1-26)

0960. W2 (Deere) - - 9". Good++, not cleaned. (D542)

0961. LEHR - L15 - - 9.25" with a hammer poll. Pitted. (R1-295)

0962. DONALDSON 21 - - 8.5". Pitted. (R1-148)

0963. 452 (orphan) - - 14.5". Good+, some pitting.

0964. 41 (orphan) - - 8.25". Good++, one jaw slightly sprung. (Rathbone's Supplement lists a No. 41 wrench for Twin Cities but no illustration)

0965. OS 85242 / OCS (orphan) - - 15.5" heavy single open ended wrench. Good with pitting, nick.

0966. Z8 (or 8Z) (orphan) - - 11". Good+.

0967. 16482 (orphan) - - 20". Large impressive looking wrench. Good++.

0968. HOOPER / DG848 - - 8.75" pressed steel. Looks like the Gale DG848. RARE, first one we have had to sell. Bold, large markings, Good+, some light pitting. (R1-238)

0969. HOOPER / DG849 - - 6.75" pressed steel. Looks like the Gale DG849. RARE, first one we have had to sell. Bold, large markings, Good+, minor edge dings. (R1-238)

0970. Unmarked (Walter Wood part No. "OO" and "RM") - - 10". Pitting. (not in Rathbone, recently ID from Walter Woods Parts Lists)

PiCs Lots 957 thru 970

End of cataloged individual lots. There may be additional unlisted lots

Choice Box Lots (will be sold choice item from each lot)

Choice Box 001: Lot of Five Farm Wrenches
(1.) GDP Co / G111 (Grand Detour Plow Co. - Dixon, ILL.) - - 10". Good. (R1-205)
(2.) GALE 26 (Gale Mfg. Co. - Albion, Mich.) - - 10". Pitted. (R1-193)
(3.) BAILOR PLOW CO / ATCHISON KAN. - C49) - - 9.75" Good. (R1-38)
(4.) 1222 (Massey Harris earlier Case Plow Works) - - 10.25". Good++. (R312)
(5.) J. I. CASE PLOW WORKS - 4105 / C - - 10.25". Good++.

Choice Box 002: Lot of Six Farm Wrenches
(1.) NATIONAL (script) - - 9". Cast.
(2.) 106 (Moline Plow Co.) - - 8". (R1-332)
(3.) CONNECTING ROD SCREW / CYLINDER NUT - 95095 (Delco Light) - - 8.25" Good++.
(4.) WR (Ohio Cultivator - Bellevue, Ohio) - - 8.5". Polished. (R1-357)
(5.) 7370 (Empire Plow Co. - Cleveland, Ohio) - - 6.5". Good++.
(6.) G70 (Madison Plow Co. later Fuller & Johnson) - - 7.5". Good++, painted. (R1-305)

Choice Box 003: Lot of Six Farm, Etc. Wrenches
(1.) BILLINGS & SPENCER SPECIAL - 38 W.H. - - 8.25" doe forged wrench.
(2.) THE BAY STATE / PAT APL;D FOR - - 6" double ended ratchet wrench. Ratchet mechanism missing on one end. (S164)
(3.) S852 (Acme Harvesting Co. - Peoria, Illinois) - - 6" by 8.25" tee socket wrench. Painted. (R1-4)
(4.) P.P.CO / > 100 (with "CH" logo (Pattee Plow Co - Monmouth, Illinois) - - 7.5". (see R1-373)
(5.) 17 (Gale) - - 9". Painted, pitting. (R1-193)
(6.) 1072 (Sattley Mfg Co) - - 10.5" with a hammer head. Square rather than round opening on big end variation. Pitted, bent. (R2-257)

Choice Box 004: Lot of Six Farm Wrenches
(1.) M215EE - - 7" oddball combination wrench with six sizes, came with Craftsman welders.
(2.) Marked only "B" (orphan) - - 7" doe-s.
(3.) Z C111 (Roderick Lean - Mansfield, Ohio) - - 8".
(4.) Z811 IHC logo (McCormick / IHC) - - 7.5". All markings indented. Good.
(5.) Marked only "B" (orphan) - - 8".
(6.) C111 (Roderick Lean - Mansfield, Ohio) - - 8". Painted.

PiCs Choice Lots 1 thru 4

Choice Box 005: Lot of Six Farm Wrenches
(1.) B72 (E. W. Ross?) - - 10" Pitted. (not listed, no info)
(2.) 718 (Pattie Plow Co. - Monmouth, Illinois) - - 11.75". Edge hammer dings. (R1-373)
(3.) 42 (E. W. Ross?) - - 11.5" Pitted. (not listed, no info)
(4.) 172 (J. D. Adams & Co. - Indianapolis, Ind.) - - 10.5". One size open end variation. Some light pitting. (R2-2)
(5.) 2155 (IHC logo) (Champion than, IHC, B. F. Avery) - - 9.75".
(6.) SUNSHINE / (can't read number) (H. V. McKay / Massey-Harris - Sunshine, Australia) - - 11.5". Severe pitting, not cleaned. (R2-192)

Choice Box 006: Lot of Six Farm, Etc. Wrenches
(1.) WF-38 MADE IN USA - - 10:. After taking the photo I realized this is a Plumb Wright Field ratchet missing the ratchet mechanism.
(2.) 767 (Monitor-Moline) - - 9". The scissor wrench. Severe pitting. (R1-332)
(3.) 4105 (Massey-Harris, earlier Case Plow) - - 10"
(4.) 4359 (P & O) - - 12.5". Pitting, edge dings. (R1-370)
(5.) BEAR / DWB-1386 - - 13" heavy soe.
(6.) UX5 (Gehl Bros. and Western Land Roller) - - 15" Silo filer wrench. Pitting. (R2-112, R2-292)

Choice Box 007: Lot of Six farm and Misc. Wrenches
(1.) WOOD (no markings on reverse side) (Walter A. Wood Mower & Reaping Machine Co. - Hoosick, Falls, NY) - - 11.25" . Light pitting, no patina. (R1-494)
(2.) 2715 (P & O, later IHC) - - 9.5". Good+. (R1-251)
(3.) 274A (Massey-Harris, earlier Johnston Harvester) - - 8.5". Good+. (R1-311)
(4.) RIVERSIDE / S. O. CO. T- - 8.5"Combination wrench, hammer with a hook on one end
(5.) WARDS ECLIPSE 4732 / FORGED USA - - 6.5". Area of pitting on back side.
(6.) 1059B - (IHC logo) / (McCormick's "MC" logo) - - 8.5". Two logo variant not on the IHC List. Good++.

PiCs Choice Lots 5 thru 7

Choice Box 008: Lot of Six Farm Wrenches
(1.) 100 (Wood Bros. Thresher Co. - Des Moines, Iowa.) - - 10.75" offset double open end wrench. Excellent. (not in Rathbone, recently identified from a parts list)
(2.) 157 (Deere & Co) - - 9.75" Fair, pitting. (R1-130, D28)
(3.) 7350B - - 7" Eberhard type doe-s wrench.
(4.) 78?5" (can't read all the numbers) - - 10.25" six opening S-wrench. Pitted
(5.) 53 (orphan) - - 12" six opening S-wrench. Good++.
(6.) 2340B / PATD with Eberhard's "E" in a circle logo - - 12.5". Good++, has a notch in one jaw?

Choice Box 009: Lot of Five Case Threshing Machine Co. Flat Steel Wrenches
(1.) CASE O25W - - 6"
(2.) CASE O28W - - 9" . Light pitting.
(3.) CASE O28W - - 9"
(4.) CASE W7659S MADE IN USA - - 9.25"
(5.) CASE O29W - - 10"

Choice Box 010: Lot of Seven Flat Steel Wrenches
(1.) P & O CO. / P & O CO (IHC) - - 11.5".
(2.) P & O CO. / P & O CO (IHC) - - 9".
(3.) JD-52 (Deere) - - 8.5".
(4.) JD-50 (Deere) - - 6.25".
(5.) BRITISH MADE KING DICK -9/16 AF - 5/8 AF - - 6.25"
(6.) M. P. Co. (Moline Plow Co.) - - 7".
(7.) M. P. Co. (Moline Plow Co.) - - 11". Edge dings.

PiCs Choice Lots 8 thru 10

Choice Box 011: Lot of Seven Farm Wrenches
(1.) M189 (Acme Harvester Co. - Peoria, ILL.) - - 6.5" pitman wrench. Good. (R1-4)
(2.) 7350B (with Eberhard's "E" a circle logo) / PATD - - 7" doe-s wrench.
(3.) P & O CO - 4130 / CANTON ILL (Parlin & Orendorff Co. - Canton, ILL. / IHC) - - 8.75". Some pitting. (R1-370)
(4.) SUNNEN / MADE UN USA - - 7.5". Thick double open ended wrench. Excellent.
(5.) D & M (Deere & Mansur) - - 6.5". Good. (D303)
(6.) Marked only "8B" (orphan) - - 8" with hammer poll. Good.
(7.) PEORIA / D1003 (Peoria Drill & Seeder Co., Peoria, ILL.) - - 7.5". Painted. (R1-376)

Choice Box 012: Lot of Eight Farm Wrenches
(1.) Y103 (Rock Island Plow Co) - - 7.5". No patina. (R1-401)
(2.) 422 - J. H. WILLIAMS - U.S.A. - - 5.5" face spanner.
(3.) Marked only "81" (???) - - 8". Pitted, no patina.
(4.) BASE WRENCH / EP49 (Oliver) - - 6.5". Pitted. (R1-360)
(5.) 6 (or 9) (orphan) - - 7.5" single box end.
(6.) 44 (Brown-Manly Plow Co. - Malta, Ohio) - - 8.25". with hammer poll. Good+, weak markings. (R1-66)
(7.) W7 (Blizzard Mfg. Co. - Canton, Ohio) - - 7.5" S-wrench. Good++. (R1-56, R2-36)
(8.) marked only "8" (orphan)- - 9.25" single box end.

Choice Box 013: Lot of Eight Farm Wrenches and a Williams Spanner.
(1.) J. H. WILLIAMS & CO. USA / NO. 482 ADJUSTABLE FACE SPANNER - - 6.5" Good++.
(2.) P & O CO. / P & O CO. (IHC) - - 7" flat steel.
(3.) W21 (Mast, Foos & Co) - - 4.5" double open ended S-wrench for Mast, Foos Lawn Mowers. Good++. (R3-142)
(4.) Marked only "10" (orphan) - - 3.5" by 5.5" L-shaped open end by socket. Good++.
(5.) 2234 (Massey-Harris, earlier Case Plow) - - 7.5". Pitting. (R1-311)
(6.) HR67 (Rock Island Plow Co) - - 9". Some pitting. (R1-400)
(7.) 2155 (No logos) (Champion than, IHC, B. F. Avery) - - 10". Two outer jaw edges have been modified by grinding.
(8.) BUFORD / C1 (Buford & Co. - Rock Island, IL) - - 8". Pitted. (R1-70)

Choice Box 014: Lot of Lot of Seven IHC Wrenches
(1.) X - DEERING (small letters in an indented panel) / (reverse has no markings) - - 7.5" Deering type.
(2.) 12335-D (IHC logo) - - 8". One IHC logo variation not on IHC List. Excellent.
(3.) M231 - - 6.75" open back, notched bar variation.
(4.) M231 - - 6.75" open back, solid bar variation. Good+.
(5.) G3172 - IHC logo - - 6.75". All markings are raised. Good++.
(6.) DEERING (large letters) / DEERING (small letters in an indented panel - - 7.5" Deering type.
(7.) B573 (American Seeding Machine Co, originally Superior Drill Co. - Springfield, Ohio - also on IHC Tool List) - - 8.5". Excellent. (R1-446, R1-16)

PiCs Choice Lots 11 thru 14

Choice Box 015: Lot of Six Farm Wrenches
(1.) marked only "1" (orphan) - - 10.5". Oddball, Some pitting.
(2.) Marked only "1" (same wrench as one marked "Tague & Kerlin Wrench / Midland Mfg Co. Tarkio Mo USA - 1) - - 8.5". Good+. (see R1-326) Pitting, dings.
(3.) J M Co JM CO (Janesville Machine Co.) - - 9.5". (R1-265)
(4.) 260 (Morrison) - - 10" Part number only variant. Painted, pitting. (R1-340)
(5.) 256 (Hoosier Drill Co., Richmond, Indiana - later American Seeding Machine Co. and IHC) - - 7.75" with raised numbers.
(6.) 72 with a dogbone logo (like J. D. Adams 172 Wrench) - - 10.25". Mistake for Adams' 172 wrench?

Choice Box 016: Lot of Six Farm, Etc. Wrenches
(1.) PO209 (IHC)- - 13.5". Number indented
(2.) 251 (orphan) - - 12" large farmer's S-Wrench type.
(3.) LACKAWANNA - 3/4 - 5/8 (same markings both sides) - - 13.5" double open end S-wrench. Some pitting. (not listed, no info found)
(4.) K 5/ W (orphan) - - 12.5". Looks like the John Deere King Corn Silo wrench.
(5.) B144 (orphan) - - 16". some pitting (not listed, no info found)
(6.) 60 (orphan) - - 14"heavy oddball.

Choice Box 017: Lot of Seven Farm Wrenches
(1.) 15 (orphan) - - 8.5"
(2.) 140 (Johnston Harvester / Massey-Harris) - - 8.5". Pitted.
(3.) 2156 (Champion than, IHC, than B. F. Avery) - - 7.5". No logo variation.
(4.) 6849H SPARK PLUG (IHC) - - 8.5" double socket wrench. Good. (R1-252)
(5.) 397 (Superior Drill Co - Springfield, Ohio, later Am. Seeding Mach. Co.) - - 7". Good+. (R1-446)
(6.) Marked only: "O" (J. D. Tower & Sons - Mendota, Illinois) - - 8" Tee wrench without square opening variant.
(7.) 208 (Acme Hay Harvesting Co.) - - 8"

PiCs Choice Lots 15 thru 17

Choice Box 018: Lot of Nine Chain Detachers
(1.) TRASCO - A1476 / TRAXCO - M - - 7.5". Good+.
(2.) LINK-BELT (with dogbone logo ) / EASY CHAIN DETACHER NO. 1 - - 8" Good.+.
(3.) OLSON MFG. CO. - ALBERT LEA MINN. - CD-58 / STEEL & ROLLER CHAIN DETACHER - - 8". Excellent.
(4.) MOLINE IRON WORKS - A69 / MOLINE STEEL CHAIN DETACHER - - 7.75". Some dings, partial original decal.
(5.) HERSCHEL NO. 111 CHAIN DETACHER / HERSCHEL - R. HERSCHEL MFG. CO. - PEORIA ILL - - 8.25". Good, not cleaned.
(6.) STEEL CHAIN DETACHER - - 8". Dings.
(7.) LINK-BELT (with dogbone logo ) / EASY CHAIN DETACHER NO. 10 - - 8" Good.+.
(8.) PEORIA STEEL CHAIN DETACHER / PEORIA MALL. CASTINGS CO. - 325 - - 8". Good++,
(9.) ALBERT LEA FOUNDRY - ALBERT LEA, MINN. - CD-58 / STEEL & ROLLER CHAIN DETACHERS - - 8". Fair.

Choice Box 019: Lot of Eight Farm Wrenches
(1.) 4106 / C (Massey-Harris, earlier case Plow) - - 8" Good++ (R1-311)
(2.) Marked only "C" (orphan) - - 5". Excellent.
(3.) 178 (J. D. Adams - Indianapolis, Ind.) with dogbone logo - - 6.5". Good++. (R2-2)
(4.) Marked only "4" - - 6.5". Looks like Brown-Manly Plow Co wrench No. 1AA. Good++.
(5.) LS8 (orphan) - - 6.25". four open ends with spanner pegs. Excellent.
(6.) INDEPENDENT / SP115 (Independent Harvester Co, - Plano, Illinois) - - 7.25". Good+. (R1-247)
(7.) INDEPENDENT SP116 - - 9.25" Good+. (R1-247)
(8.) INDEPENDENT / SP117 (Independent Harvester Co, - Plano, Illinois) - - 11" Good. (R1-247)

PiCs Choice Lots 18 thru 19

Choice Box 020: Lot of Seven Farm Wrenches
(1.) I -1 (orphan) - - 7" oddball. Pitting.
(2.) YAN (orphan) - - 7.5" S wrench with center hanger hole Good. (R3-246 with no info)
(3.) J H CO / 218 (Johnston Harvester) - - 9.25" Good+. (R1-272)
(4.) LAX PLOW CO (La Crosse Plow Co. - La Crosse, Wisc.) - - 9.5". Markings indented variation. Good+ with some light pitting. (R1-289)
(5.) JAMESWAY - FT. ATKINSON WIS. - ELMIRA NY / MINNEAPOLIS MINN. - 1008 - - 7.75". Good+. (R1-267)
(6.) 138 (Eagle Mfg. - Kansas City, MO and Dallas, TX) / "U" logo - - 7.75" with small hammer head. Good+. (R2-84)
(7.) 9476 (Buffalo Pitts) - - 7". Pitting. (R3-36)

Choice Box 021: Lot of Six Farm, Etc. Wrenches
(1.) STARBUCK - - 13" cast hook spanner with open hex wrench. Excellent. (R437)
(2.) 120 (orphan) - - 8". doe-s thick wrench. Polished.
(3.) D. M. M. CO (Dempster Mill Manufacturing Co) - - 12". Jaw missing, pitted,. (R1-143)
(4.) BP19 (orphan) - - 13"with light pitting.
(5.) L.C.A. Mfg. Co. - 64 / F.C (Liquid Carbonic Acid Mfg. Co - Terre Haute, Indiana ).- - 11.5" Pitted. ( R1-289 with no info)
(6.) LE ROY - G / X37 (Le Roy Plow Co., New York) - - 11". Good+. (R1-291)

Choice Box 022: Lot of Four IHC Wrenches
(1.) P1599 - IHC logo (all raised) / P1599 (indented) - - 12". Good++.
(2.) P1599 - (IHC logo) - - 12" Markings on one side only, all markings indented variation. Good++.
(3.) P1599 - IHC logo (all raised) / P1599 (indented) - - 12".Excellent.
(4.) G3526 - IHC logo - - 11.5". All markings raised. Bent.

PiCs Choice Lots 20 thru 22

Choice Box 023: Lot of Six Farm Wrenches
(1.) S20 (orphan) - - 10" oddball. Some pitting.
(2.) 93 (orphan) - - 10.5". Painted.
(3.) W102 - - 10". Pitting.
(4.) Marked only "4" (orphan) - - 9.75"
(5.) S699 (orphan) - - Some pitting.
(6.) SS (orphan) - - 10.25" oddball. Polished.

Choice Box 024: Lot of Six Farm Wrenches
(1.) 3B8829 with a horizontal "T" logo (Caterpillar) - - 9" drain plug wrench.
(2.) Indiana Silo Co Anderson Ind (marked same on both sides) - 11". double open end "S" wrench. Poor markings on one side. (R1-249)
(3.) 1249 (A. C. Evans) - - 14.25" Good+, some edge damage. (R3-77)
(4.) J. I. CASE PLOW WORKS 883 - - 14.75". Some jaw damage. (R1-77)
(5.) 296S (orphan) - - 12.5". Pitted,
(6.) 01982AB (Case T. M. Co. - - 13" tractor hubcap wrench. Flat variant. Good++, (R1-78 with Case Plow Works listings)

Choice Box 025: Lot of Seven Farm Wrenches
(1.) 541 (orphan) - - 7.25" oddball with three open ends and an extended square box end. Some pitting.
(2.) 44 (Brown-Manly Plow Co. - Malta, Ohio) - - 8.25". with hammer poll. Good++. (R1-66)
(3.) 841 (Brown Mfg Co. - Zanesville, Ohio) - - 8.25" with hammer poll. jaw corner crack, light pitting. (R3-35)
(4.) 13 (orphan) - - 8".with hammer poll. Pitting.
(5.) 2599 (orphan) - - 7". Pitting.
(6.) Marked only "3" (Kingman Plow Co.? - Peoria, Illinois) - - 8". Light pitting. (R1-284)
(7.) 106W (orphan) - - 8.5". Pitted.

PiCs Choice Lots 23 thru 25

Choice Box 026: Lot of Six farm Wrenches
(1.) 795??3 (Orphan) - - 10.5". Severe pitting.
(2.) BAMFORDS' / S T No 5 - - 9.5". Severe pitting. (R1-39)
(3.) Marked only "B" (orphan) - - 10" oddball.
(4.) W. P. CO. 71 (Wiard Plow Co. Batavia, NY) - - 9.5".
(5.) JFS (J. Fleury's Sons - Aurora, Ontario, Canada) - - 11" Good. (R1-178)
(6.) GALE 21 (Gale Mfg. Co. - Albion, Mich.) - - 8.75". Good+. (R1-193)

Choice Box 027: Lot of Eight Farm Wrenches
(1.) 81 (orphan) - - 10" oddball.
(2.) 3-1/2 (orphan) - - 4.75" single box end.
(3.) 5089 (Avery Co, Peoria, ILL) - - 10" Tee socket without extra top center socket variant.
(4.) 6522 (orphan) - - 10.75". Oddball with two open ends with a slotted round end. Good++.
(5.) MD16 (IHC) - - 14.75" double square socket. Rare IHC wrench not in Rathbone's book and just two owners on the IHC List
(6.) 1999 (Silver Mfg Co - Salem, Ohio) - - 13.5". (R425)
(7.) C101 (orphan) - - 14.25". Some pitting.
(8.) Marked only "C" (orphan) - - 8".

Choice Box 028: Lot: Eight Farm Wrenches
(1.) 369 (orphan) - - 6.5". Gear teeth on one end and open end on the other end, no peg variant. Good+.
(2.) 646 - 4 (orphan) - - 9.25"
(3.) B & H / 1371 (Bickford & Huffman - Macedon, NY) - - 7". Good++. (R1-32)
(4.) 1185 (Massey-Harris earlier Johnston Harvester) - - 7.25". Pitting. (R1-272, R1-311)
(5.) S41 (orphan) - - 6" square box end. Excellent.
(6.) 61? (orphan) - - 7.5". Weak markings, painted.
(7.) 18 (orphan) - - 8" with six openings. According to Rathbone's Supplement this might be an A. B. Farquhar or South Bend Chilled Plow wrench. Good+.
(8.) S793 (orphan) - - 6.25" doe wrench with spanner pegs.

PiCs Choice Lots 26 thru 28

Choice Box 029: Lot of Six Deering Type Wrenches
(1.) 6000 - R. & W. CO. - 6000 / MODEL (Rector & Wilhelmy - Omaha, Neb.) - - 7.5" Deering Type. Pitted. (R2-242)
(2.) AKRON (Akron Cultivator Co - Akron, Ohio) - - 7.25" Deering type. Pitting. (R1-7)
(3.) NATIONAL - - 7.5" Deering Type with an additional small opening. Pitted. (R1-346)
(4.) ARNHOLT - - 7.25" Deering Type. Pitted. (R1-21)
(5.) 6000 - SIMMONS / UTILITY(Simmons Hardware Co St. Louis) - - 7.25" Deering Type. Pitted. (R1-426)
(6.) 20 - - 7.25" Deering Type.

Choice Box 030: Lot of Six: Farm Wrenches.
(1.) Unmarked - - 10". Like Walter Wood "OO" wrench.
(2.) Unmarked - - 8". Like Oliver "X" wrench. Pitted.
(3.) B.F. AVERY & SONS G176 / LOUISVILLE KY USA - - 9". Pitted. (R1-27)
(4.) 387T 9/16 (orphan) - - 10.5" handled socket wrench.
(5.) INDIANA SILO CO (Anderson, Indiana) / 5/8 - - 11" double open end S-wrench. Light pitting or casting roughness. (R1-249)
(6.) Unmarked (oddball) - - 11". Broken jaw.

Choice Box 031: Lot of Seven Farm Wrenches
(1.) Unmarked (orphan) - - 6" x 9.5" L-shaped wrench with three open ends. Good++.
(2.) 78 (Hart Grain Weigher Co) - - 5.5". Good+. (R3-104)
(3.) Unmarked (orphan) - - 7.25" with large hammer poll. Good++.
(4.) 107 (orphan) - - 5.5". Excellent.
(5.) Unmarked (orphan) - - 8.25 " oddball. Pitted.
(6.) AVERY / 464 (Avery Co. - Peoria, ILL) - - 6.75". Severely pitted. (R1-26)
(7.) C111 (Roderick Lean - Mansfield, Ohio) - - 8". Good+. (R1-294)

PiCs Choice Lots 29 thru 31

The following four lots of IHC G3170 wrenches are from Gil Irps' collection and the type numbers were identified by Gil

Choice Box 032: Lot of Eight IHC G3170 Variations
(1.) Type 1
(2.) Type 2A
(3.) Type 3.
(4.) Type 4.
(5.) Type 5 - - Pitted
(6.) Type 9
(7.) Type 7
(8.) Type 8.

Choice Box 033: Lot of Eight IHC G3170 Variations
(1.) Type 9.
(2.) Type 11.
(3.) Type 13.
(4.) Type 19.
(5.) Type 15.
(6.) Type 19.
(7.) Type 20. Twisted.
(8.) Type 27.

Choice Box 034: Lot of Eight IHC G3170 Variations
(1.) Type 29. Painted.
(2.) Type 35. Pitting.
(3.) Type 46.
(4.) Type 40. Jaws ground.
(5.) Type 50.
(6.) Type 68.
(7.) Type 7.
(8.) Type 11.

PiCs Choice Lots 32 thru 34

Choice Box 035: Lot of Five IHC G3170 Variations
(1.) Type 2.
(2.) Type 11.
(3.) Type 11. Pitted.
(4.) Type 9.
(5.) Type 19.

Choice Box 036: Lot of Six IHC Farm Wrenches
(1.) P1502 / IHC logo (IHC, originally Osborne) - - 12.25" double socket. Pitting.
(2.) P1189 / (IHC logo) (Osborne - IHC) - - 14.25" long, raised numbers with logo variation..
(3.) 373941R2 with IH logo - 1-5/16" - - 14.5" single12 point box end. Excellent, most of the original finish.
(4.) P1189 / (IHC logo) (Osborne - IHC) - - 14.25" long, raised numbers with logo variation..Some weak markings.
(5.) 373941R2 with IH logo - 1-5/16" - - 14.5" single12 point box end. Excellent, most of the original finish.
(6.) P1189 / (IHC logo) (Osborne - IHC) - - 14.25" long, raised numbers with logo variation..Some weak markings.

Choice Box 037: Lot of Eight IHC Farm Wrenches
(1.) G3172 - IHC logo - - 6.75". All markings are raised.
(2.) IHCO 12335D / (IHC logo) - - 8" doe.
(3.) P11 (Milwaukee Harvester Co., later IHC) - - 9.5". With post, numbers indented variant. Pitting, weak markings.
(4.) L320 with Plano logo / PATENT PENDING (Plano Mfg. Co. - Plano, Illinois / Later IHC) - - 8". Lower jaw assembly only. Severe pitting.
(5.) McCORMICK (in a W & Barnes diamond logo) - - 10" wood handled monkey wrench. Needs a donor wrench for the missing wood handle. Pitting, dings.
(6.) UA51 - (IHC logo) - - 8.75". No Canada on back, all markings indented variation.
(7.) 21264D with IHC logo - - 7.25".
(8.) 1326-E (raised in recess panel) - IHC logo (raised in circle) - - 8. 5".

PiCs Choice Lots 35 thru 37

Choice Box 038: Lot of 23 (21 IHC Wrenches and 2 IHC Sickle Section Guards). Most have not been cleaned.

PiCs Choice Lot 38

Choice Box 039: Lot of Eight Adjustable Wrenches
(1.) Unmarked - - 9" nippers, Pitting.
(2.) Unmarked - - 9" auto type adjustable wrench. Pitting.
(3.) B & C (Bemis & Call) / 8" curved handled Crescent type wrench. Open handle variant. Good.
(4.) Unmarked - - 8" odd plier type spanner?
(5.) P. S. & W. TOOLS (Peck, Stow & Wilcox) - SOLID BAR - PAT JAN 14, 1896 - - 6.5" monkey wrench with knife type handles. Good+.
(6.) FORD USA (on side of lower jaw) "M" logo (Manzel) - - 8" auto type adjustable wrench. Fro Ford Model "A"s.
(7.) STILLSON'S WRENCH - MOORE DROP FORGING CO. - - 8" wood handled Stillson type pipe wrench.
(8.) WESTCOTT - THE KEYSTONE MFG. CO. / BUFFALO NY USA - 14 INCH NO. 84 - - 14" closed handle variant. Good+.

Choice Box 040: Lot of 16 IHC Wrenches

PiCs Choice Lots 39 thru 40

Choice Box 041: Lot of 17 IHC Wrenches

PiCs Choice Lot 41

Choice Box 042: Lot of Eight Farm Wrenches.
(1.) 4131 DELAVAL - - 8" oe and spanner wrench with screwdriver. Fair.
(2.) L298 (New Idea Spreader Co. - Coldwater, Ohio) - - 8". Good. (R1-349)
(3.) SHARES / N167 (Janesville Machine Co.) - - 5.5". Good++, new paint. (R1-265)
(4.) D & M (Deere & Mansur) - - 6.5". Good+. (D303)
(5.) 397 (Superior Drill Co - Springfield, Ohio, later Am. Seeding Mach. Co.) - - 7". Good+. (R1-446)
(6.) 4106 / C (Massey-Harris, originally Case Plow) - - 8" with a hammer poll. Good++. (R1-311)
(7.) JD-51 (Deere) - - 8.5" flat steel. (D364)
(8.) OHIO CHILLED / NEW IMPERIAL (B & G Plow Co. - Canton, Ohio) - - 9.75". Poor, pitted. (R1-31)

Choice Box 043: Lot of Eight Farm Wrenches
(1.) STANDARD (Standard Garden Tool Co. - Montrose, Iowa) - - 6.5" garden cultivator type, side opening variant. Excellent. (R1-435)
(2.) 2819 - 1 (weak markings) / ("D" in a diamond logo) (orphan) - - 9.5" buggy wrench. Good+.
(3.) (weak markings (orphan) - - 9.25". Good+.
(4.) 1126A (Moline Plow Co) - - 6" by 10.5"" tee socket wrench. Good+. (R1-332)
(5.) U50 - 4 / CANADA - (IH logo) (IHC) - - 8.25". All markings indented. Good++.
(6.) Z27 (orphan) - - 4.75" cast double hex socket wrench. Good++.
(7.) FORDSON - 4 / 2372 (Moore's "M" in a circle logo) - - 11" double hex socket wrench. Good+, some edge nicks.
(8.) 22-P (orphan) - - 9". Pitted.

Choice Box 044: Lot of Nine Farm Wrenches
(1.) A165 (Minnesota Prison Industries) - - 5.25". Good++. (R3-154)
(2.) Unmarked (orphan) - - 5.5" Good++.
(3.) Unmarked (Briggs & Stratton) - - 4.75". Flat steel small gas engine wrench.
(4.) 88 (South Bend Chilled Plow Co.) - - 6.25". Good+. (R2-267)
(5.) AVERY / 251 (Avery Co. - Peoria, ILL) - - 7.25". Some pitting. (R1-26)
(6.) C (Janesville Machine Co. - later Samson Tractor Co. No. 752425) - - 7.5" Good+ (R2-256)
(7.) FORDSON - 2 ("M" in a circle logo) - - 6" doe. Good+.
(8.) K4 (Dille & McGuire, Richmond, Indiana) - - 4.5". Small single open end with pointed end. Listed in Simmon's Catalogs for their KeenKutter lawn mowers.
(9.) 369 (orphan) - - 6.5". Gear teeth on one end and open end on the other end, no peg variant. Light pitting.

PiCs Choice Lots 42 thru 44

Choice Box 045: Lot of 16 IHC Wrenches

Choice Box 046: Lot of Seven Farm Wrenches
(1.) OHIO CHILLED / NEW IMPERIAL (B & G Plow Co. - Canton, Ohio) - - 10". Good, bent. (R1-31)
(2.) 123 (David Bradley) - - 7.5". Open loop handle. . (R1-125)
(3.) SA2126 (IHC) - - 7" Stamped steel wrench. Excellent. (R1-255)
(4.) Unmarked (orphan) - - 8.75" cast three opening wrench and hitch pin. Light pitting.
(5.) DAYTON / C - PATENTED (with Dayton's "D" in a circle logo) - - 7.5" buggy wrench. Good++.
(6.) 7350A (Wm. E. Pratt Mfg. Co. - Chicago) - - 6.25" doe-s wrench. Good++.
(7.) 7350C (Wm. E. Pratt Mfg. Co. - Chicago) - - 7.75" doe-s wrench. Good++.

PiCs Choice Lots 45 thru 46

Choice Box 047: Lot of Six Farm Wrenches
(1.) GALE 21 (Gale Mfg. Co. - Albion, Mich.) - - 8.5". Good+. (R1-193)
(2.) E BEMENT AND SONS LANSING MICH. / J181-1/2 - - 8" by 12.5". Good, not cleaned. . (R1-49)
(3.) F153 (Oliver and Canadian IHC) - - 8.5". Good.
(4.) Unmarked (Fordson?) - - 10.75" Fordson type hub wrench. God++.
(5.) DISK - - (Janesville Machine Co. Later Samson Tractor Co.) - - 14.25". Good+. (R1-265)
(6.) DISC / 217 (Johnston Harvester) - - 14.5". Good+. (R1-272)

Choice Box 048: Lot of Eight Farm Wrenches
(1.) D & M (Deere & Mansur) - - 6.5". Good++. (D303)
(2.) JD52 - - 8.5" flat steel.
(3.) 31 (Deere, Hart-Carter, Nichols & Shepard and Oliver) - - 8.5" tee socket wrench. Numbered on right variation. Good++. (D5)
(4.) 369 (orphan) - - 6.5". Gear teeth on one end and open end on the other end, no peg variant. Good++.
(5.) CHAMPION - 502 - - 8" doe-s
(6.) CHAMPION - - 7" doe.
(7.) CHAMPION - - 8" doe.
(8.) CHAMPION - - 9" doe.

Choice Box 049: Lot of Six Misc. Wrenches
(1.) Three cast scythe snatch type wrenches, two with old Witte Hardware Co. (of St, Louis, Mo) price tags.
(2.) 2101 - 3/8 - - 4.5" soe. Good++.
(3.) Unmarked - -7.5" odd flat steel multi-wrench. Excellent.++
(4.) 13 - - 6.25" offset single open end. Excellent.
(5.) 5024X - - 6.25" open end with a stove or range lid lifter? Excellent.
(6.) FORDSON - 2 ("M" in a circle logo) - - 6" doe. Good+, some surface rust.

PiCs Choice Lots 47 thru 49

Choice Box 050: Lot of Five Misc. Wrenches and Tools
(1.) Sears Craftsman No. 10 die wrench with 1/2" and 3/4" pipe dies. - - 19.5"
(2.) L. S. Starrett screw threads and drill sizes chart and calculator.
(3.) ARMSTRONG / No. 2 - - 5" soe. Good++. not cleaned
(4.) E. C. ATKINS & CO. - INDOL IND - 112 - - 7.5" saw tooth setting tool.
(5.) J. H. WILLIAMS & CO.- 685 - - 12" doe-S wrench. Excellent with original black finish.

Choice Box 051: Lot of Ten Adjustable Wrenches
(1.) Two monkey wrench wooden handles and one handle nut.
(2.) PERFECT / PERFECT - - 7" cast hog ringer. Good++.
(3.) 6" MASTERENCH self adjusting wrench. Serrated jaws and round hang hole variant. Good+, some light pitting.
(4.) L. COES & CO WORCESTER, MASS / L. COES & CO PAT'D MAR 23,1869 (George Taft's patent) - - 6" with round wood handle. Good++, not cleaned. (HP27)  PAT
(5.) Unmarked - -6" wood handled Coes type monkey wrench. Good++, minor handle chip.
(6.) BRIDGE TOOL CO. - ST. LOUIS USA (Simmons Hardware Co.) - - 12" wood handled Coes type monkey wrench. Good++.
(7.) B. M. C. Mfg. Co. (Braunsdorf Mueller Co. - Elizabeth, NJ) - - 7" Locking Pliers. some pitting over markings.
(8.) B & C / 8 IN. (Bemis & Call) - - 8" curved handle Crescent type adjustable wrench. Open handle variant. Good+.
(9.) GENUINE STILLSON WRENCH - WALWORTH MFG. CO. - - 12" wood handled pipe wrench. Good++, with a tight handle crack.
(10.) LAKE SUPERIOR WRENCH CO - SAULT STE MARIE, MICHIGAN - - 17.5" self adjusting nut and pipe wrench. Good with some light pitting.

Choice Box 052: Lot of Six Bicycle or Pocket type Wrenches
(1.) Unmarked - - 7" flat steel multi-wrench. Excellent, not cleaned.
(2.) Unmarked - - 3.75" pocket or bicycle screw adjust wrench. Good+.
(3.) Billings & Spencer - "A" - - 4.25" bike or pocket wrench. Good++.
(4.) Mossberg Diamond No. 10 - - 5" bicycle or pocket wrench. Good+/
(5.) Unmarked - - 3.75" pocket or bicycle screw adjust wrench. Good+, one area with pitting.
(6.) Mossberg A-2 - - 5.5" bike or pocket wrench.

PiCs Choice Lots 50 thru 52

Choice Box 053: Lot of 18 IHC Wrenches, Etc.

Choice Box 054: Lot of 13 Automotive Related Wrenches - Including Ford, Maxwell, EMF, Hudson-Essex, Etc.

PiCs Choice Lots 53 thru 54

Choice Box 055: Lot of Seven Adjustable Wrenches
(1.) MEADVILLE WRENCH CO.- MEADVILLE, PA. - - 8" Briggs style all metal nut wrench with short hex adjusting nut. Good, minor dings, not all markings are readable.
(2.) Unmarked - - 14" unusual chain wrench. Excellent.
(3.) WALDEN WORECESTER / 516 - PATENT PENDING - MADE IN USA - - 9" unusual female drive ratchet. Pated by Warren S. Bellows of Worcester, Mass. on Oct. 15, 1918. Good++  PAT
(4.) A. G. COES & CO. - WORCESTER MASS / steam engine governor logo with 5-2-1871 and 12-28-1875 patent dates) - - 10" Coes wooden handled jog bar type. Good. (HP22)
(5.) FINEST QUALITY / 6 IN - - 6" Crescent type. Jaws sprung.
(6.) G.T.D. CORP'N - GREENFIELD, MASS - MADE IN USA (Greenfield Tap & Die Corp.) - - 14" Stillson type wrench. This is a nut wrench not a pipe wrench. First one I have seen. Good++.
(7.) DENVER ROCK DRILL MFG. CO. - W & B - - 10" all metal monkey wrench. Strap on lower jaw assembly is broken.

Choice Box 056: Lot of Six adjustable Wrenches
(1.) Unmarked - - 9" center screw adjust nut wrench. Good++.
(2.) Unmarked - - 9.5" self adjust pipe wrench. Good++. (S343).
(3.) Unmarked - - 13.5A" reversible ratchet with wooden knob. Excellent.
(4.) Marked only W-GERMANY - - 11.5" automotive type adjustable nut wrench with angled jaws. Good++. (not in Schulz but see Wullweber 259)
(5.) Unmarked - - 10" wooden handled Coes type monkey wrench. Fair.
(6.) Unmarked - - 10" double ended ratchet wrench with hex female drives. Good++.

PiCs Choice Lots 55 thru 56

Choice Box 057: Lot of 11 Eberhard Type Buggy Wrenches - Most are rusty and uncleaned, some are bent or twisted.

Choice Box 058: Lot of Four Buggy Type Wrenches
(1.) DAYTON / Z 2812 - PATENTED (Dayton's "D" in a circle logo) - - 7.5" with small wrench opening on end of handle. Good++.
(2.) 7305C (with "E" in circle logo) - - 6". Good, not cleaned.
(3.) Unmarked (orphan) - - 7" double box ends with open shaft. Good+.
(4.) HR67 (Rock Island Plow Co) - - 9". Painted. (R1-400)

PiCs Choice Lots 57 thru 58

Choice Box 059: Lot of Seven Garden Cultivator Type Wrenches
(1.) X32 (Whitman & Barnes) - - 5.75". Severe pitting. (R3-240)
(2.) H & D (Hench & Dromgold - York, Penn.) - - 5.25". Good+. (R1-228)
(3.) 36 (Superior Drill Co. - Springfield, Ohio) - - 6". Casting flaw on one jaw edge. (R1-446)
(4.) PLANET JR./ 3 - MADE IN THE UNITED STATES OF AMERICA - - 6.25" Excellent with original finish.
(5.) 3 - PLANET JR. / PLANET JR. - - 6.25". Good+.
(6.) 3 - PLANET JR. / PLANET JR. - - 6.25". Painted, small drilled hole.
(7.) J8 (Frost & Wood) - - 6". One of the rarest garden cultivator wrenches. Good+. (R1-188}

Choice Box 060: Lot of Six Garden Cultivator Type Wrenches
(1.) Marked only "9" (orphan) - 6". Good++
(2.) Famous Ohio / M625 (Ohio Cultivator Co. Bellevue, Ohio) - - 5.75". Good++. (R1-357)
(3.) 10 (Empire Plow Co. - Cleveland, Ohio) - - 6". Good+. (R1-166)
(4.) B14 (orphan) - - Six square cutouts on shaft variation. Painted, pitted.
(5.) B14 (orphan) - - Solid shaft variation. Some pitting.
(6.) 3 - PLANET JR. / PLANET JR. - - 6.25". Good++

Choice Box 061: Lot of Seven Misc. Smaller Wrenches
(1.) GRANITE STATE LAWN MOWERS - HINSDALE, NH - - 5.5" flat steel. (R2-117) Good++.
(2.) 170 with Eberhard's "E" in a circle logo. (orphan) - - 4.5". Good++. Painted.
(3.) E. C. STEARNS & CO / 5074 - SYRACUSE, N. Y - - 4.5". Good++.
(4.) 231 (orphan) - - 6". Good++.
(5.) 13 (orphan) - - 6". Good++.
(6.) 24 (orphan) - - 4.75". Good++.
(7.) BAKER ICE MACHINE CO - - 6". Good+.

Choice Box 062: Lot of Six Misc. Smaller Wrenches
(1.) 1893 (Dille & McGuire, Richmond, Indiana) - - 3.75".
(2.) 41 (orphan) - - 3.5" cast scythe snatch type wrench.
(3.) WILLIAMS (with a "M" in a circle logo) - 5.5".
(4.) 285 / (ZC logo) (Valle & Kimes, Dayton, Ohio) - - 4.5" .
(5.) 04554 (orphan) - - 5.5" oddball with two side by side open ends, face spanner and screwdriver end.
(6.) 13 (orphan) - - 4.5" oddball with tear drop shaped cutout

PiCs Choice Lots 59 thru 62

Choice Box 063: Lot of Six Buggy and Wagon Type Wrenches
(1.) SHELDON AXLE CO / 151X (Sheldon Axle Co., Wilkes-Barre, Penn.) - - 9" buggy wrench. Severe pitting. (R1-423)
(2.) Marked only with a "U" in a circle logo (orphan) - - 10.5" wagon hub type wrench. Good++.
(3.) 7307B (with Eberhard's "E" in a circle logo) - - 7.5" Dayton type buggy wrench. Good+.
(4.) DAYTON / V 2812 - PATENTED (with Dayton's "D" in a circle logo - - 7.5" buggy wrench, opening on end of handle. Good+. (like R1- 127)
(5.) DAYTON / 2812 (with Dayton's "D" in a circle logo) - - 7.5" buggy wrench. Good++. (like R1- 127)
(6.) DAYTON / 1 - 2813B - PATENTED (with Dayton's "D" in a circle logo - - 7.25" buggy wrench, opening on end of handle. Good++, painted. (like R1- 127)

Choice Box 064: Lot of Seven Farm Wrenches
(1.) GALE (Gale Mfg. Co. - Albion, Mich.) - - 10.5". Good+, light pitting or rough casting. (R1-193)
(2.) VB & TB CO - EASTON PA - 1/2 / FOR PETROL FASTENER ("K" in a keystone logo) - - 9". Some pitting, not cleaned. (R3-224)
(3.) CHAIN BELT CO. - 7/16 / MILWAUKEE WIS - - 7.5" Good. (R1-92)
(4.) BOND - 2 (Bond Foundry & Machinery Co. - Manheim, Penn.) - - 8.75". Excellent. (R1-58)
(5.) (IHC logo) G3170 - - Type ?
(6.) (IHC logo) G3170 - - Type 2
(7.) I.H.CO. G3170 (IHC logo) / (IHC logo) - - Type 1

Choice Box 065: Lot of Six Farm Wrenches
(1.) 916 (Monitor Drill / Moline Plow Co.) - - 7". Excellent. (R1-332, R1-334)
(2.) 1315 (orphan) - - 7.5" Oddball. Good++, painted.
(3.) 768 (Adriance, Platt & Co. - Poughkeepsie, NY) - - 8". Good++. (R1- 5)
(4.) S20 (orphan) - - 6.25" oddball. Pitting.
(5.) 18 (orphan) - - 8" with six openings. According to Rathbone's Supplement this might be an A. B. Farquhar or South Bend Chilled Plow wrench. Good+, not cleaned.
(6.) 41 (orphan) - - 10". Good++. (Rathbone's Supplement lists a No. 41 wrench for Twin Cities but no illustration)

PiCs Choice Lots 63 thru 65

Choice Box 066: Lot of Seven Farm Wrenches
(1.) 378 (Frost & Wood) - - 7.25" Good++ (R1-188)
(2.) 71 (orphan) - - 3.25" x 3.75" L-shaped. Excellent.
(3.) 474 (Ontario Drill Co. - East Rochester, NY) - - 7". Good++, not cleaned. (R2-226)
(4.) B61A (Emerson- later Case T. M. Co.) - - 4.5" x 5". Scarce T-shaped with open end, screwdriver and cotter key tool. (R1-162,
(5.) 7355 with Eberhard's "D" in a circle logo - - 5.75" Good++.
(6.) ?50 (can' read first number) (orphan) - - 8.5". One end missing?
(7.) 53 (orphan) - - 8.75" Farmer's S-type. Pitted.

Choice Box 067: Lot of Seven Farm, Etc. Wrenches
(1.) 628 (orphan) - - 7" odd What's It with square box opening on end.
(2.) 973 (Massey-Harris) - - 8.5" Rare Massey-Harris, first we have had to sell. Good++, but one jaw is missing. (R2-182)
(3.) 1728 (Walter A Wood) - - 6". Good+ with a tight jaw crack. (R1-494)
(4.) Unmarked (orphan) - - 7" oddball with large hammer poll. Good+ with some edge damage.
(5.) 57 (orphan) - - 7.25" oddball with a hammer poll. Good++, not cleaned.
(6.) 3558 (orphan) - - 8" by 11" open end by open end by square socket tee wrench. Light pitting or casting roughness.
(7.) 3R - 3-2-4 (orphan) - - 5.5" oddball double hook spanner. Excellent.

Choice Box 068: Lot of Six farm Wrenches
(1.) 8 & 9 (orphan) - - 9" chilled plow type. Pitted.
(2.) 95 H (orphan, may be David Bradley?) - - 9.25". Poor, jaw crack.
(3.) E. T. / 110 (David Bradley) - - 9.75". Three open ends by one open end. Good. (R1-126)
(4.) STANDARD (Standard Garden Tool Co. - Montrose, Iowa) - - 6.5" garden cultivator type, side opening variant. Excellent. (R1-435)
(5.) PLANET JR./ 3 - MADE IN THE UNITED STATES OF AMERICA - - 6.25" Excellent with original finish.
(6.) A523 / DEERE MANSUR CO. - - 6". Good++, (D177)

PiCs Choice Lots 66 thru 68

Choice Box 069: Lot of Six Farm Wrenches
(1.) 70 TO 83 (Wiard Plow Co. - Batavia, NY) - - 9.5". Good+. (R1-488)
(2.) WP1 (Tudhope-Anderson - Orillia, Ontario and Winnipeg, Manitoba, Canada - Also on the IHC List) - - 9.75". Large marking variant. Good+. (R2-279)
(3.) WP1 (Tudhope-Anderson - Orillia, Ontario and Winnipeg, Manitoba, Canada - Also on the IHC List) - - 9.75". Small markings variant. Good++. (R2-279)
(4.) WP. CO - A2 (Wiard Plow Co. - Batavia, NY) - - 7". Pitted. (R488)
(5.) MOLINE PLOW CO / WP241 - - 10.25" . Three openings on one end and one on the other variation. Pitting. (R1-333)
(6.) W. P. Co. 94 (Wiard Plow Co. - Batavia, NY) - - 11". Good++. (R1-488)

Choice Box 070: Lot of Seven Farm Wrenches
(1.) 1252 (Adriance / Moline Plow Co) - - 5.5" Good++. (R1-5)
(2.) 4S (Sandwich Mfg Co.) - - 7.25". Good+. (R1-412)
(3.) 41 (orphan) - - 8.25". Excellent. (Rathbone's Supplement lists a No. 41 wrench for Twin Cities but no illustration)
(4.) 642 (Gale / Ohio Rake) and a "P" in a circle logo - - 6.75". Oddball with a wing nut opening. Pitting. (R1-193, R1-359)
(5.) 415 (orphan) - - 7.75" heavy duty oddball. Painted.
(6.) 575 (Goold, Shapley & Muir Co. - Brantford, Ontario, Canada) - - 7.25" cast windmill company wrench. large high relief markings variation. Pitted, not cleaned. (R2-116)
(7.) 1562 (George W. Brown? - Galesburg, Illinois) - - 11.5". Missing jaw. (R3-34)

Choice Box 071: Lot of Five IHC Wrenches
(1.) G3171 and IHC logo - - 7.75". Both number and logo raised. Good+.
(2.) DEERING (in a ledger plate logo) - D736 (William Deering later IHC) - - 5.5" pitman wrench. Good+. (R1-139)
(3.) DEERING (William Deering later IHC) - - 7.75" Deering type. Small letters. Good++.
(4.) G246 (IHC) - - 7.75" piston socket for IHC Titan Tractors and early gas engines. No logo. Good+.
(5.) 4135 P & O CO / CANTON ILL. (later IHC) - - 10.25". Good++. (R1-370)

PiCs Choice Lots 69 thru 71

Choice Box 072: Lot of Seven Farm Wrenches
(1.) 274A (Massey-Harris, earlier Johnston Harvester) - - 8.5". Good+. (R1-311)
(2.) ACME / A881 (with a star logo) (Acme Harvester Co. - Peoria, ILL.) - - 8.5". Good. (R1-4)
(3.) F. F. MF'G. CO. (The Farmers Friend Mfg. Co. - Dayton, Ohio) - - 8.75". Poor, pitted, grind marks. (R1-170)
(4.) 379 / S. B. C. P. CO. (in logo) (South Bend Chilled Plow Co, South Bend, Indiana) -139 - - 9.25" with hammer head. Good+. (R1-429)
(5.) Marked only with a "V" (orphan) - - 9". Looks like the South Bend No. 379 wrench. Painted.
(6.) R11 (Gale) - - 9.25". Two open ends by octagon box end. Good+. (R2-109)
(7.) EMERSON (Emerson-Brantingham, Rockford, ILL) - - 10". Good. (R1-162)

Choice Box 073: Lot of Six Farm Wrenches
(1.) 17A (Gale) - - 9". Pitted. (R1-193)
(2.) DP109 (Oliver) - - 11.5". Pitted, painted. (R1-360)
(3.) DH (Frost & Wood) - - 11.5" Hex opening variant. Good++. (R1-188)
(4.) DISC / 217 (Johnston Harvester) - - 14.5" Good+, no patina. (R1-272)
(5.) DISK - - (Janesville Machine Co. Later Samson Tractor Co.) - - 14.25". Painted. (R1-265)
(6.) B144 (orphan) - - 16". Painted.

Choice Box 074: Lot of Seven Farm Wrenches
(1.) AIM CO 38 - - 9" oddball. Excellent. (R1-2 with no info)
(2.) AB (orphan) - - 5.5" oddball. Good++ with tiny nick on one jaw.
(3.) U S / U S (orphan) - - 9.75" chilled plow type. Pitted, painted. (R1-461)
(4.) D888 (Ohio Rake) - - 8.75" with hammer head. Tight jaw crack, pitting. (R1-359)
(5.) D34 - U (Deere) - - 8.75". Good. (D277, R1-131)
(6.) 379 / S. B. C. P. CO. (in logo) (South Bend Chilled Plow Co, South Bend, Indiana) -139 - - 9.25" with hammer head. Polished. (R1-429)
(7.) R55 (with an "A" in a circle logo) (Moline Plow Co) - - 7.5". Pitting. (R1-333)

PiCs Choice Lots 72 thru 74

Choice Box 075 : Lot of Nine Farm Wrenches
(1.) 517B (orphan) - - 4.75". Polished.
(2.) A52 (orphan) - -5" cast box by open end with center ridge. Good+.
(3.) D561 (Peoria Drill & Seeder Co., Peoria, ILL.) - - 5.5" oddball. Excellent. (R2-154)
(4.) D21 (Stoddard & Ohio Rake both in Dayton, Ohio) - - 6.5" Pitting. (R1-357, R2-270)
(5.) D42 1(Peoria Drill & Seeder Co. - Peoria, Illinois.) - - 8" with hammer poll. Good++. (R1-376)
(6.) M58 (orphan) - - 5.75". Good++.
(7.) 1AA (Brown-Manly Plow Co. - Malta, Ohio). - - 6.5". Excellent with original green finish.
(8.) M23 (orphan) - - 6.25" garden cultivator type. Good++.
(9.) D4 (orphan) - - 6.75". Pitted.

Choice Box 076: Lot of Seven Farm Wrenches
(1.) D.203 with a star logo (Moline Plow Co.) - - 8.25". Good++ but has a tiny, tight jaw crack. (R1-333)
(2.) D798 (Cockshutt Plow Co.) / ("MD" logo) - - 9.25" doe. Painted. (R1-106)
(3.) K439 / "P" in a circle logo (Osborne then IHC then E-B and finally Case T. M. Co. - - 6.75" no IHC logo variation. Good++.
(4.) D239 (Orphan.) - - 10". Rock Island number but not Rock Island wrench pictured in Rathbone. Pitting. (see R1-400)
(5.) APPLETON MFG CO BATAVIA ILL USA / C619 - - 7.75" Good+ (R1-21)
(6.) B.F. AVERY & SONS G177 / LOUISVILLE KY USA - - 10.75" Pitted. (R1-27)
(7.) K_L72 (E. W. Ross) - - 11". Excellent. (R1-402)

Choice Box 077: Lot of Eight Farm Wrenches
(1.) AB (W. R. Harrison - Massillon, Ohio ?) - - 8.5". This may be a rare variant of the A. B. Harrison tee wrench. Excellent.
(2.) 122A (Johnston Harvester, later Massey-Harris) - - 6.5". One rounded and two squared open ends variation. Good. (R1- 272, R1-311).
(3.) 2P30 (Madison Plow Co., later Fuller & Johnson) - - 9".Two square box openings variant. Painted. (R1-191)
(4.) 2420A (David Bradley?) - - 9.25". Good+. (not In Rathbone, Gil Irps ID)
(5.) S250 (Massey-Harris?) - - 8". Different wrench than shown in Rathbone. Good+.(see R2-183)
(6.) SPARK PLUG - GEN. NUT - 90257 / CYLINDER STUD - BATTERY NUT - 3 (Delco Light) - - 8" Good++ (R3-64)
(7.) Can't read markings (orphan) - - 6". small odd cast wrench. Pitted.
(8.) SP (orphan) - - 9.5" oddball. Pitting.

PiCs Choice Lots 75 thru 77

Choice Box 078: Lot of Seven Farm Wrenches
(1.) E139 (Eagle Mfg. - Kansas City, MO and Dallas, TX) - - 9.75". Rare, first one we have had to sell. Pitted. (R3-73)
(2.) FORDSON - N-17029 - with a VBW - Staffordshire Knot logo - - 10" hubcap wrench with beveled handle and open hex end. Usually seen marked ENFO for English Ford rather than Fordson. Good++. (see R1-180)
(3.) E16 / C (Rock Island Plow Co) - - 7.5". Good++ (R1-400)
(4.) L298 (New Idea Spreader Co. - Coldwater, Ohio) - - 8". Poor. (R1-349)
(5.) A504 (Gehl Bros. Mfg. Co. - West Bend, Wisc.) - - 10". Good++. (R2-112)
(6.) R456 (Walter A. Wood, Hoosick Falls, NY) - - 8.5". Good++. (R1-494)
(7.) A404 / U (Hayes) - - 7". Good+. (R1-227)

Choice Box 079: Lot of Seven Farm Wrenches
(1.) Marked only "L" (orphan) - - 9.5" like Oliver / IHC F239 wrench. Small jaw chip, painted.
(2.) A864 (orphan) - - 7.75". Good with weak markings.
(3.) L632 ??? (some numbers are not readable) - - 7.5". Good.
(4.) A100-1 (orphan) - - 10.5" extra wide doe. Excellent.
(5.) LM41 (Frost & Wood) - - 5.5". original paint?. (R2-104)
(6.) E266 (.B. F. Avery & Sons - Louisville, Kentucky).- - 10.5". E266 is listed in Avery parts list but with no illustration. First one I have seen. Pitting under new black paint.
(7.) RF76 (orphan) - - 9". Excellent.

Choice Box 080: Lot of Seven Farm Wrenches
(1.) F239 (Oliver and Canadian IHC-Hamilton Plow) - - 9.5". Pitted. (R1-360)
(2.) L. C. A. MFG CO (Liquid Carbonic Acid Mfg. Co. - - 8.5". Pitted. (R1-289)
(3.) JFS (J. Fleury's Sons - Aurora, Ontario, Canada) - - 11". Pitting. (R1-178)
(4.) 418L (Rude Bros) - - 7.5" Good. (R2-252)
(5.) L299 with a double diamond logo (New Idea Spreader Co. - Coldwater, Ohio) - - 9"
(6.) L140 (New Idea Spreader Co. - Coldwater, Ohio) - - 8.5" . Pitting.
(7.) JWB (Collin's Plow Co's J. W. B. Walking Cultivator, Etc. - Quincy, Illinois) - - 11.5". One open end variant. Good. (R1-266)

PiCs Choice Lots 78 thru 80

Choice Box 081: Lot of Eight Farm Wrenches
(1.) REMINGTON (Ilion, NY) - - 5.75". Three openings with hang hole variation. good+, no finish. R2-184)
(2.) R300 (Walter A. Wood, Hoosick Falls, NY) - - 6". Good++. (R2-300)
(3.) 15A - - 3.5" cast scythe snatch wrench. Excellent.
(4.) RB125 (orphan) - - 6". Broken jaw tip.
(5.) R. S. Co / CD82 (Racine-Sattley - Racine, Wisc.) - - 5.5". Excellent. (R2-257)
(6.) R57 (orphan) - - 5.5". Good++.
(7.) 1036A with a dogbone logo (Pennsylvania Lawn Mower Co.) - - 6.25".small buggy type. (R1-375)
(8.) AMERICAN SEATING CO. UNIVERSAL DESK / 13986 (Grand Rapids, Mich.) - - 6" .For the old school desks. Good++. (R1-16)

Choice Box 082: Lot of Eight Farm Wrenches
(1.) ROCK ISLAND / R1124 - - 5.5" Good. (R1-400)
(2.) ROCK ISLAND / R1123 - - 8" Good++. (R1-400)
(3.) ROCK ISLAND / R1122 - - 10.5" Good+, not cleaned. (R1-400)
(4.) AVERY / 464 (Avery Co. - Peoria, ILL) - - 6.75". Polished. (R1-26)
(5.) L297 (New Idea Spreader Co. - Coldwater, Ohio) - - 6". Fair. (R1-349)
(6.) A23 (Massey-Harris) - - 5.5". Poor, pitted, (R2-180)
(7.) VULCAN PLOW CO / EVANSVILLE IND.- - 7". Pitted. (R1-475)
(8.) R438 / D (Emerson-Brantingham later Case T. M. Co.) - - 8.5" Good+. (R1-162).

Choice Box 083: Lot of Eight Farm Wrenches
(1.) 802 / 802 (orphan) - - 6.5". Good++.
(2.) 229A (orphan) - - 8.5". Pitting.
(3.) AC19 - - 7" Implement wrench Good+ (light pitting)
(4.) RA1 (orphan) - - 7.35". Good++.
(5.) D797 (Cockshutt Plow Co.) - - 7.25". Pitting. (R1-106)
(6.) . A30 (Cockshutt) 6" tee handled socket wrench. Good+. (R3-60)
(7.) R A 11 - - 9" stove shaker handle and lid lifter?
(8.) L5 (orphan) - - 6.5". Good+.

PiCs Choice Lots 81 thru 83

Choice Box 084: Lot of Eight Farm Type Wrenches
(1.) K806 (Deere) - - 12.5". Good+, not cleaned. (D386)
(2.) DAV D (error, no "I") BRADLEY MFG CO / BRADLEY ILL - B238 - - 10". Pitting. (R1-126)
(3.) 4105 / C (Massey-Harris, earlier Case Plow) - - 10"
(4.) THE DEISTER CONCENTRATOR CO (Fort Wayne, Indiana) / 58 - - 12.75". Poor, pitted, jaw crack, small drilled hang hole. (R1-140)
(5.) Marked only "T" (J. D. Tower & Sons - Mendota, Illinois) - - 11" with hammer head. Painted.
(6.) VB & TB CO - EASTON PA - 1/2 / FOR PETROL FASTENER (diamond logo) - - 9". Bent. (R3-224)
(7.) 1126A (Moline Plow Co) - - 6.5" by 10.5"" tee socket wrench. Painted. (R1-332)
(8.) H112 (Ohio Cultivator, Sechler) - - 9.5" with hammer poll. Pitted, painted. (R1-357)

Choice Box 085: Lot of Six Farm type Wrenches
(1.) VICTOR - - 9" cast wrench with four openings.
(2.) D239 (Rock Island) - - 10". (R1-400)
(3.) KW8 (Rock Island Plow Co) - - 7.75". (R1-400)
(4.) M15 (orphan) - - 7.5". Painted.
(5.) M182 (Litchfield Mfg. Co. - Waterloo, Iowa) - - 9".
(6.) D1 (Grand Detour Plow Co. later J. I. Case Threshing Machine Co.) - - 11.75". (R3-94)

Choice Box 086: Lot of Six Farm Type Wrenches
(1.) KING - - 7.5" forged double open end wrench.
(2.) MOLINE DRILL / A1037 - MADE IN USA with Northern Malleable Iron Co.'s (St. Paul Minn.) "NR" in a circle logo - - 8.75". Excellent. (R1-332)
(3.) Marked only "D" - - 10.75" Marking raised variation. Rathbone lists a "D" wrench for Emerson but no picture.
(4.) Marked only "D" (orphan or Emerson) - - 10.75" Marking indented variation. Painted.
(5.) HH (orphan, maybe Badger Mfg. Co. - Council bluffs, Iowa) - - 9.75". Some hammer damage.
(6.) H / H (Badger Cultivator - Council Bluffs, Iowa?) - - 10.5" with a hammer head. Hammer head mushrooming. (R1-37)

PiCs Choice Lots 84 thru 86

Choice Box 087: Lot of Eight Farm Wrenches
(1.) EMERSON - M518 - - 6.5". (R1-162)
(2.) 3050 FOR PITMAN (Moline, Adriance) - - 7" Pitman wrench. (R1-5)
(3.) J. I. CASE PLOW WORKS - 1222 / B - - 10.25". (R1-77)
(4.) E6 (Roderick Lean - Madison, Ohio) - - 8.25". (R1-294)
(5.) 46CL - Case Eagle logo (Case T. M. Co.) - - 8" by 8" Tee socket wrench. (R1-82)
(6.) FERGUSON - TO-17014 - / ruler markings - - 10.5". Markings on jaws. Scarce. (R1-178)
(7.) 3 - T - 6F3703 (Caterpillar) - - 8.5" Drain plug wrench. (R3-43)
(8.) CHAIN BELT CO. - 1/2 / MILWAUKEE WIS - - 8.75". (R1-92)

Choice Box 088: Lot of Seven Farm, Etc Type Wrenches
(1.) VANBRUNT / D380 with JD logo - - 7". Excellent. (D282)
(2.) TAPPAN / 620 - 11" - - 6" cast stove wench and lid lifter?
(3.) DREDNAUT / ST JOSEPH, MICH. - - 6" Good++. (R1-151)
(4.) A522 / DEERE MANSUR CO. - - 7.5". Reverse markings variation. Good, painted. (D172)
(5.) Z435 / <M-H> (raised dot) - - 8" cast with Massey-Harris logo on back variation. Pitting. (variation not in Rathbone)
(6.) THE NATIONAL / AMMONIA CO. (Southampton, Penn.?) - - 7.5". Severely pitted. (R1-346 with no info)
(7.) CP245 (Oliver and Canadian IHC) - - 9.25" Severely pitted. (R1-360, R1-98)

Choice Box 089: Lot of Nine Farm Wrenches
(1.) FORDSON / F2197 - M-210 - - 10.75". Excellent. (R1-180)
(2.) CYL. HEAD - COVER PLATE / CONN. ROD NUT - 90258 (Delco Light) - - 6.75". (R3-64)
(3.) "EASY" NO. 2. (H. K. Porter) - - 6.75". Came with H. K. Porter Bolt Cutters.
(4.) D239 (Kingman Plow Co - Peoria, Illinois) - - 9.75". Pitted. (R3-123)
(5.) N9 (orphan) - - 5.5". Looks like the more common M58 wrench.
(6.) CD (W. R. Harrison Co. - Massillon, Ohio) - - 6.75". Rare Harrison variant. Pitted, bent.(R3-103)
(7.) F153 (Oliver and Canadian IHC) - - 8.75". Fair.
(8.) R-11 (orphan) - - 5.25" neat little three opening wrench with peg on end. Excellent.
(9.) Marked only D127 (Sterling Mfg. Co. - Sterling Illinois?) - - 14". Not in Rathbone but same wrench number as marked Sterling wrench (see R1-439)

PiCs Choice Lots 87 thru 89

Choice Box 090: Lot of Eight Cast Wrenches
(1.) NYE - P937 / NYE - 1-1/2 and 2 - - 11.5" cast spud wrench. Good++.
(2.) FITS-ALL - 1/4" TO 1" - TRADEMARK - PAT. PENG. / FITS-ALL - 1/4" TO 1" - MADE IN USA - - 5.75" dogbone type wrench with eight openings. Good++. (S889)
(3.) SKELGAS - - 5.5" welding or bottle wrench.
(4.) ROCKFORD / G5 - - 5.5" single square box end.
(5.) VA94 (orphan) - - 6". Good+.
(6.) H & D - YORK PA (Hench & Dromgold - York, Penn.) - - 7.25" with hammer poll. Blackened. (R1-228)
(7.) VBP - - 7". Not cleaned. (R1-468, with no info)
(8.) R20 (Burch Plow Co, Crestline, Ohio) - - 10" double open ended S-wrench with center ridge. Good++, not cleaned. (R1-71, R2-46)

Choice Box 091: Lot of Eight Cast Wrenches
(1.) 6".REGO / CH logo - -
(2.) "AUTOMATIC" / AS4 - - 8.25". Painted.
(3.) DAYTON / 1 - 2813C PATENTED (with Dayton Malleable Iron Co's "D" in a circle logo) - - 7.2" buggy wrench. Patent was granted to Horace E. Morrill of Dayton, Ohio on April 23, 1907. (R1-127)  PAT
(4.) C? (orphan) - - 8".
(5.) 1214 (orphan)- - 7.75". Painted.
(6.) 7350D (Wm. E. Pratt Mfg. Co.) - - 8.75". (R1-385)
(7.) 2340A (with a "G" in circle logo) - - 10.75".
(8.) 7345D (Illinois Malleable Iron logo "IM") - - 11.75". (R2-139)

Choice Box 092: Lot of Ten Stamped Steel Wrenches
(1.) CASE 027W - - 7.5".
(2.) KITCHENKOOK - - 5".
(3.) MADE IN USA - - 10.25".
(4.) CASE 027W - - 7.5".
(5.) JD53 - - 10.5". Pitted.
(6.) ROCK - ISLAND - - 9".
(7.) CASE 028W - - 9.25".
(8.) ROCK - ISLAND - - 7".
(9.) ROCK - ISLAND - - 11.5".
(10.) REGO 2613-8 - - 6".

PiCs Choice Lots 90 thru 92

Choice Box 093: Lot of Seven Farm Type Wrenches
(1.) REMINGTON (Ilion, NY) - - 6". Three openings with hang hole variation. R2-184)
(2.) R84? (orphan) - - 7". Severely pitted.
(3.) Marked only "12" (orphan) - - 4.75". Looks like a lawn mower wrench.
(4.) H4 (with a star logo) (Gale Mfg. co. - Albion, Mich.) - - 7.5". Pitted. (R1-193)
(5.) RODERICK LEAN / D144 - - 7.75". rare Roderick Lean wrench (first one we have had to list) but it is pitted.(R1-294)
(6.) 103 HAWORTH'S / 103 CHECK ROWER - - 7.5". Fork or claw on end variant. Severely pitted. (R1-227)
(7.) 103 HAWORTH'S / 103 CHECK ROWER - - 7". No claw on end variant. Pitting. (R1-227)

Choice Box 094: Lot of Seven Farm Wrenches
(1.) FAMOUS OHIO - J276 - - 9.25". Good++. (R1-357)
(2.) J M CO (Janesville Machine Co.) - - 9". Painted. (R1-265)
(3.) USMC / 219 (United Shoe Machinery Co.) - - 5.25" doe.
(4.) DX (orphan) - - 9" Odd cast wrench with hammer poll. Pitted.
(5.) Z435 - <M-H> / (raised dot) - - 8" cast with Massey-Harris logo on front variation. Good++. (R1-312)
(6.) A882 (Acme Harvester Co. - Peoria, ILL.) - - 7.25". (R1-4)
(7.) A883 (Acme Harvester Co.) - - 9"

Choice Box 095: Lot of Seven Farm, Etc. Wrenches
(1.) 379 / S. B. C. P. CO. (in logo) (South Bend Chilled Plow Co, South Bend, Indiana) / 139 - - 9" with hammer head. Logo faintly marked as usual. (R1-429)
(2.) USMC (United Shoe Machinery Co.) / WRHL - 216H - - 4" doe.
(3.) AIRCO (etc.) / 8090028 - - 8.5" welding wrench.
(4.) IOWA (Iowa Cream Separator - Waterloo, Iowa) - - 7.5". Pitted. (R2-147)
(5.) USMC - 219 (United Shoe Machinery Co.) - - 4" doe.
(6.) OHIO (Ohio Cultivator Co. - Bellevue, Ohio?) - - 7" flat steel. (R1-357)
(7.) F239 (Oliver and Canadian IHC-Hamilton Plow) - - 9.5". Good. (R1-360)

PiCs Choice Lots 93 thru 95

Choice Box 096: Lot of Six IHC Wrenches. All Good+ or better condition.
(1.) ZA810 / IHC logo (IHC, originally McCormick) - - 9.25" pitman wrench. Horizontal part number and all markings raised variation.
(2.) 10014C - IHC logo - - 7.25" cream separator wrench.
(3.) R197 (McCormick- / IHC) - - 8.25". !-1/16" and 7/8" openings variation (not listed with these size openings).
(4.) P890 - IHC logo - - 7.25". All markings raised and on one side variation.
(5.) R319R (extra large markings) / IHC logo - - 7.75". All markings raised, IHC logo on back side variation.
(6.) R319R IHC logo - - 7.75". Number indented, logo raised.

Choice Box 097: Lot of Seven IHC Wrenches
(1.) M231 (IHC) / T - - 7.25" pitman wrench with socket variation. Pitted.
(2.) A1210 (IHC) - - 7.5" Pitman wrench. No logo variation.
(3.) Z810 (IHC) - - 7". No logo variation.
(4.) F153 (Oliver and Canadian IHC) - - 8.5". Fair.
(5.) L9 - IHC logo / C - - 8.25". Solid shaft with 1/2" round hole, number and logo raised variation.
(6.) L9 (IHC)- - 8". Six round holes, indented markings variation.
(7.) 490B (IHC) - - 7.75" with five wrench openings and hammer head.

Choice Box 098: Lot of Seven IHC Wrenches
(1.) P & O CO - CANTON ILL / 2715 - - 9.5". All markings raised.
(2.) ZA810 / IHC logo (IHC, originally McCormick) - - 9.25" pitman wrench. Horizontal part number, part number indented, logo raised variation.
(3.) P & O CO - CANTON ILL / 4129 (later IHC) - - 10.25"
(4.) M141 - (IHC logo) - - 9". Number indented logo raised variation.
(5.) F9136 - IHC logo / 2 - - 9.5".
(6.) 10465CX - IHC logo - - 8.75" cream separator wrench and screwdriver.
(7.) P & O CO - CANTON ILL / 4129 (later IHC) - - 10.25". Pitted.

Choice Box 099: Lot of Eight IHC Wrenches

PiCs Choice Lots 96 thru 99

Choice Box 100: Lot of Five Deere Wrenches
(1.) 196 (Deere) - - 7.25". Two square holes variant. Good++. (D43).
(2.) 196 (Deere) - - 7". Three long slots and two round hole variant. Good+, some pitting. (D37)
(3.) VANBRUNT / (no markings on reverse) - - 7". No stud, 7/8" hex variant. Excellent. (D279)
(4.) DAIN / Z-78 (Deere) - - 6.5" pitman wrench. Good. (D-561, R1-121)
(5.) DAIN (L136) - - 7.75" No part number variant. Good+ (D410)

Choice Box 101: Lot of Six Deere Wrenches
(1.) A124 (Deere) - - 4" Tee wrench. Pitted. Numbered across head variant. (D151, R1-131)
(2.) D34 - U (Deere) - - 8.5". Excellent. (D277, R1-131)
(3.) SYRACUSE / LH22 (Syracuse Chilled Plow / Deere) - - 9" with hammer head. Good+. (D420, R1-448)
(4.) 31 (Deere, Hart-Carter, Nichols & Shepard and Oliver) - - 8.25" tee socket wrench. Numbered on right variation. Good+. (D5)
(5.) G51E (Dain / John Deere) - - 8.25". Good+. (D318, R1-121)
(6.) 148 (Deere & Co) - - 9.5" Good+ (D25, R1-130)

Choice Box 102: Lot of Six Cream Separator Wrenches
(1.) SHARPLES SEPARATOR CO / TUBULAR - - 6" single open end. Good++. (R1-422)
(2.) DELAVAL - - 8" open end, face spanner and screwdriver. Good+.
(3.) IOWA CREAM SEPARATOR (Waterloo, Iowa) / 0 and U logo - - 7". Double open end S-wrench. Good++, no patina. (R1-259)
(4.) ECONOMY CHIEF - - 6" doe-s wrench. Good. (R1-157)
(5.) THE DE LAVAL SEPARATOR CO - NEW YORK USA / 490 - - 7.5" Poor. (R1-142)
(6.) DE LAVAL - 4549 - - 8.25" open end and hook spanner wrench. Good++. (not pictured in Rathbone's books)

PiCs Choice Lots 100 thru 102

Choice Box 103: Lot of Eight IHC Wrenches
(1.) P318 / IHC logo (IHC, earlier C B & Q Co.) - - 4.5".
(2.) N236 - IHC logo (Empire Drill / American Seeding Machine Co, later IHC) - - 6.25". Pitting.
(3.) U50 / CANADA - (IH logo) - - 8". All markings indented.
(4.) UA51 - IHC logo / CANADA - - 8.5". All markings indented variation.
(5.) U50 - IHC logo - - 8". All marking raised.
(6.) U51 - IHC logo - - 8.5" Number raised, logo indented variation.
(7.) G8917 - IHC logo - - 4.25". For early IHC Gas Engines.
(8.) H523 with a star logo (IHC) - - 8.25" doe-s variant.

Choice Box 104: Lot of Seven IHC Wrenches
(1.) 5283 - IHC logo - - 9.5" Emerson style.
(2.) 5283 / P & O CO. - - 10" Emerson style.
(3.) VB624 - IHC logo - - 11" binder crank and wrench. All markings raised variant.
(4.) G261 - IHC logo / MOWER - - 7.25" pitman wrench.
(5.) 204L / (IHC logo) - - 6" double square socket listed for McCormick-Deering Threshers, Huskers, Shredders. Markings indented variant.
(6.) 2715 / Mc logo and IHC logo - 2 (P & O, / IHC) - - 9.25".
(7.) P1189 / IHC logo (IHC, originally Osborne) - - 14.25" double socket with embossed (raised) numbers and logo

Choice Box 105: Lot of Six IHC Wrenches
(1.) F354 - IHC logo - - 7.75". Two square holes, all markings raised,
(2.) P3156 / IHC logo) - - 8.5". Excellent with original paint.
(3.) 256 - IHC logo- - 7.5" with raised log, indented numbers variation.
(4.) P890 - IHC logo - - 7.25". all markings raised and on one side variation.
(5.) A1210 / IHC logo - - 7.5" Pitman wrench
(6.) L9 - IHC logo - - 8". Five round holes, logo raised, numbers indented variation.

PiCs Choice Lots 103 thru 105

Choice Box 106: Lot of Eight IHC Wrenches
(1.) Z811 (IHC) - - 7.5". Number indented, no logo variation. Pitted.
(2.) F354C / IHC logo - - 8". All markings indented, two square hole variant
(3.) 0014CA - IHC logo - - 7" cream separator wrench
(4.) 924C - IHC logo - - 6.25" cream separator wrench, with keyhole variation.
(5.) D736 / IHC logo (IHC, originally William Deering & Co.) - - 5.5" pitman wrench.
(6.) N738 - CANADA - IH logo - - 5" L-socket wrench.
(7.) P28-1/2 and a Plano logo (Plano, later IHC) - - 6.25" doe-s wrench All makings raised.
(8.) H523 (IHC) - - 8" doe-s variant.

Choice Box 107: Lot of Eleven IHC Wrenches (all Good++ or better)
(1.) 1325EA IHC logo
(2.) 97L with IHC logo
(3.) 7/16 - 1595E - 3/8 IHC logo
(4.) IHCO - 12335D / IHC logo
(5.) 12737DA IHC logo
(6.) G3173 / IHCO
(7.) 1326E with IHC logo
(8.) G3173 with IHC logo.
(9.) 2164D with IHC logo
(10.) 12737D
(11.) G3166 with IHC logo

Choice Box 108: Lot of Seven Farm Wrenches
(1.) APPLETON MFG CO - BATAVIA ILL USA / C620 - - 10" Good, pitted. (R1-21)
(2.) 1-2 - 7-16 - DIAMOND CALK HORSESHOE CO - DULUTH, MINN. with horseshoe logo / 7.75" single ended horse shoe calk wrench with hammer poll. Good.
(3.) R121 C (orphan) - - - 8.75" Same shape as Iron Age cutout wrench. Good+, light pitting.
(4.) T10 (orphan) - - 3.75" scythe snatch wrench? Excellent.
(5.) 25 (Newell Sanders Plow Co. - Chattanooga, TN) - - 11.25". Scarce Newell Sanders wrench. Good+.
(6.) 111 (orphan) - - 9.25". Good.
(7.) 91 (Johnston Harvester - Batavia, NY) - - 11.75" Good+. (R1-272)

PiCs Choice Lots 106 thru 108

Choice Box 109: Lot of Nine Assorted Wrenches.
(1.) TIRE CARRIER WRENCH / 678225 - 6 (with a backward "S" in a diamond logo) - - 9". Studebaker truck spare tire carrier wrench. Good++.
(2.) Marked only "1" - - 4.25" small cast soe with open loop handle end. Excellent.
(3.) K537 (orphan) - - 5.25". Good+.
(4.) USMC - 235 (United Shoe Machinery Co.) - - 7.5" doe. Excellent.
(5.) BRIDGE TOOL CO. ("StL" in a circle logo) / A - - 5.25" doe-s type. Simmons Hardware brand. Good++. (see R1-63)
(6.) BRIDGE TOOL CO. / D - - 8.25" doe-s type. Simmons Hardware brand. Good+ with drilled hang hole. (see R1-63)
(7.) BOND - 1 (Bond Foundry & Machinery Co. - Manheim, Penn.) - - 10. 5". Good++. (R1-58)
(8.) FASTS COUPLING / 1 - - 8.5" silo type wrench. Good+. (R1-176)
(9.) EXHAUST MANIFOLD PACKING NUT - PINION - AND DIFFERENTAL BEARING ADJUSTMENT NUT WRENCH (orphan) - - 12.5" spanner wrench with tab. Good+, some edge damage.

Choice Box 110: Lot of Six Farm and Misc. Wrenches
(1.) MOLINE PLOW CO / H.X.5+ - - 10.5". Good++. (R1-333)
(2.) J. P. MANNY (John P. Manny Mower Co. of Rockford, ILL. later Emerson-Brantingham.) - -12". jaw crack. (R1-309)
(3.) BUCKEYE - DAYTON OHIO - PAT. PEND. / ('S" in a shield logo) - - 14.75" barrel bung wrench. Good+.
(4.) BELL SYSTEM - S / A10397 - - 13" lineman's lag screw wrench. Good++.
(5.) T1274 (Sawyer-Massey - Hamilton, Ontario, Canada) - - 15" RARE large double offset box ended wrench. Good+, rusty, not cleaned. (R3-197)
(6.) SIMMONS (with arrow logo) - - 10". After market Ford service wrench. Good++.

Choice Box 111: Lot of Six Farm Type Wrenches
(1.) 115 (orphan) - - 10.25" Farmer's-type wrench. Good++.
(2.) R136 (Keystone, later IHC) - - 7". Good with poor casting on part numbers. (R1-255)
(3.) 110 (orphan) - - 9". Excellent with most of the original paint.
(4.) 011B (Gale Mfg. Co. - Albion, Mich.) - - 8.75". Good+. (R1-193)
(5.) ROD'K LEAN / C111 - - 8". Pitted. (R1-294)
(6.) LD300 (orphan) - - 8.25". Usually found without markings. Good.

PiCs Choice Lots 109 thru 111

Choice Box 112: Lot of Fifteen Assorted Wrenches. Good for Weld Art Projects

Choice Box 113: Lot of Twelve Farm Type Wrenches. Most have issues: cracks, missing parts, pitted, etc.

PiCs Choice Lots 112 thru 113

Choice Box 114: Lot of Seven Silo Wrenches
(1.) T.B. WOOD'S SONS - 5/8 - CHAMBERSBURG, PA. - - 11" Some pitting. (R1-493)
(2.) UNADILLA SILO CO - - 10". Open end by double box end. Pitted. (R1-462)
(3.) MONTGOMERY WARD & CO 5/8 / 1/2 - - 10" silo wrench. Painted. (R1-336)
(4.) CHICAGO MFG. & DISTRIBUTING CO. - CHICAGO / PATENTED MARCH 10, 1914 and a CH logo) - - 10.5" 1-1/16" female hex drive cast ratchet with a 5/8" hex socket. Good++.  PAT+
(5.) TWIN CITY TANK & SILO CO - 5/8 / MINNEAPOLIS MINN - 1/2 - - 10". Painted. (R1-461)
(6.) SAGINAW SILO / FARMERS HANDY WAGON CO (Saginaw, Mich.) - - 8.5". Painted. (R1-175)
(7.) UNADILLA SILO CO - 30 - - 10". Open end by double box end. Blackened. (R1-462)

Choice Box 115: Lot of Four Assorted Wrenches and Locking Pliers
(1.) P & ? CO. - NEW YORK - - 14". (no info found)
(2.) "WYETH" (Wyeth Hardware Co. - St. Joseph, MO) - - 10" Coes type monkey wrench with wooden knife type handle. Poor.
(3.) PLI-WRENCH - PAT. PEND. - - 9." locking pliers with curved lower jaw with pivoting insert that resembles a pelican's bill. Usually found marked Whale Tool Corp. Patent was issued to Ernest St. Laurence of Minneapolis, MN on Nov. 22, 1949. Good, not cleaned. (S275T)  PAT.
(4.) VISE-GRIP - DEWIT, NEBR. - - 8.75" early model without the quick release lever.

Choice Box 116: Lot of Five Assorted Wrenches
(1.) WARREN WEBSTER & CO / CAMDEN NJ - - 11.75". Good++. (R1-482)
(2.) DUNHAM SYSTEMS OF HEATING - CHICAGO ILLINOIS - TRAP COVER - 1/2 UNION NUT / 179C - - 13". Good.
(3.) W1074 / E-B in a diamond logo (Emerson-Brantingham, Rockford, ILL) also a "T" in a "D" logo - - 16.25". Good++. (R1-163)
(4.) J. H. CO / 630 (Johnston Harvester Co. Batavia, NY, later Massey-Harris) - - 14.5". Good+. (R1-272)
(5.) EMERSON / W1074 (Emerson-Brantingham, Rockford, ILL) - - 16.25". Good++. (R1-163)

PiCs Choice Lots 114 thru 116

Choice Box 117: Lot of Thirty-Four Good for Weld Art Projects Wrenches

PiCs Choice Lot 117

Choice Box 118: Lot of Seven Tee Type Farm Wrenches
(1.) 479 (oddball orphan) - - 12.25" unusual tee wrench similar to Moline B355 and Madison Plow / Fuller & Johnson 2H33. Jaw crack.
(2.) E BEMENT AND SONS LANSING MICH. / J181-1/2 - - 8" by 12.5". Good. (R1-49)
(3.) D44 - RODERICK LEAN (Mansfield, Ohio) - - 10" by 15.5" tee socket wrench with center hex . Good++. (R1-294)
(4.) ST21 (Oliver) - - 7" by 11.25" Tee socket wrench. Good+. (R1-361)
(5.) DH18 (Butcher & Gibbs) - - 15". Most seen have been 12.5" long. Good++ (R1-31)
(6.) 4780 (orphan) - - 6.25" x 11". Pitted.
(7.) B58 (orphan) - - 12". Light pitting.

PiCs Choice Lot 118

Choice Box 119: Large Lot of Twenty-Five Farm Type Wrenches. Most have issues: uncleaned, cracks, missing parts, pitted, etc.

PiCs Choice Lot 119

Choice Box 120: Lot of Eleven Misc. Wrenches
(1.) SNAP-ON - 9/16 - SNAP-ON - 5/8 - - 6.25" double 12 point socket wrench. One socket has a crack.
(2.) HERBRAND CO.- FREMONT, O (with Herbrand's "H" in a diamond logo) - - 23" extra long double open ended S-wrench. Good++, not cleaned.
(3.) 3 - OTIS (Otis Elevator?) - - 5.5" single open end wrench. Good++.
(4.) JONES-ORTH / JONES-ORTH - - 11". Single open end wrench. Good+.
(5.) Unmarked- - 5.5" tee handled special purpose wrench.
(6.) 459 / Williams' "W" in a diamond logo - - 7.5" hook spanner. Good with light pitting.
(7.) Unmarked (orphan) - - 16.75" long, thin tee handled hex socket. Good++.
(8.) 8256 Q17 (orphan) - - 3.25" tall, 2-7/8" steel socket.
(9.) T122 (with a "F" in a circle logo) - - 15". Probably and automotive specialty wrench. Good++ with owner's stamped ID "P. Wein".
(10.) 667A - WILLIAMS - FORGED IN USA (Williams' "W" in a diamond logo) / 1-7/8 and 1-1/4 - - 11.75" double open ended S-wrench. Good++, not cleaned.
(11.) STAR SPRINKLER CORPORATION ( with a star logo) / PHILADELPHIA, PA USA (with a star logo and a "HE" logo ) - - 9". Excellent.

Choice Box 121: Lot of Six Farm Wrenches
(1.) A158 (Milwaukee, IHC) - - 6.75" Pitman wrench, Good++. (R1-328)
(2.) R197 (McCormick- / IHC) - - 8". 11/16" and 13/16" openings variation. Painted.
(3.) B573 (American Seeding Machine Co, originally Superior Drill Co. - Springfield, Ohio - also on IHC Tool List) - - 8.5". Good, light pitting. (R1-446, R1-16)
(4.) S8 (orphan) - - 7.75". Look like Rock Island KW8 wrench. Excellent, blurry markings.
(5.) 34 (Rock Island Plow Co) - - 7.75" Multi-wrench, large open end variation. Good. (R1-400)
(6.) J. I. C. P. WKS. 359 (Case Plow Works) - - 8.25" Good++. (R1-77)

PiCs Choice Lots 120 thru 121

Choice Box 122: Large Lot of Twenty-Two Misc. Tools, Etc. Including drills, snips, saw set, files, screwdrivers, etc.

PiCs Choice Lot 122

Choice Box 123: Lot of Seven Farm Wrenches
(1.) H90 (orphan) - - 10.75". Good.
(2.) No. 10G DISC (Grand Detour Plow) - 10.5" S-Wrench. Three opening variation. Pitted. (R1-205)
(3.) CASE 028W - - 9.25" pressed steel.
(4.) ROCK ISLAND PLOW CO. - H358 - - 13". Painted, some pitting. (R1-400).
(5.) EMERSON - - 10". Good++.
(6.) 12 (Gale Mfg. Co. - Albion, Mich.) - - 9.75". Good+. (R2-109)
(7.) STERLING MF'G. CO. - D127 / STERLING ILL. - - 12" Graphic lettering. Good, blackened. (R1-439)

Choice Box 124: Lot of Eight Farm Type Wrenches
(1.) W1795 - ET / E-B logo and "DT" logo (Emerson-Brantingham ) - - 10". First wrench seen with both the "W1795" and "ET" markings. Good+. .
(2.) E-B logo and "DT" logo(Emerson-Brantingham ) / W1795 - - 10". Reverse markings than above wrench. Painted.
(3.) AMERICAN - P600 - - 10.5" single open end at 90 degrees. (owner modified?). Good++.
(4.) D764 (orphan) - - 12.25"double hex box with spanner tips. Painted, one spanner tip is missing.
(5.) B55 (orphan) - - 8". Good with light pitting.
(6.) BS9 (orphan) - - 7.5" single box end with open loop handle. Good++.
(7.) Marked only D127 (Sterling Mfg. Co. - Sterling Illinois?) - - 14". Not in Rathbone but same wrench number as marked Sterling wrench. Good, light pitting. (see R1-439)
(8.) 136 (Deere) / N - - 10.25". Round holes variant. Good with pitting. (D20, R1-130)

Choice Box 125: Lot of Eleven Assorted Wrenches, Etc.
(1.) M. KLEIN & SONS / CAT. 3146 - - 13" lineman's lag screw wrench. Good++.
(2.) WRIGHT - X-27 - - 9" multi-opening drain plug wrench. Good++.
(3.) DASCO - - 7.75" combination tool with hammer, chisel and fencing staple or cotter key puller. Good++.
(4.) AF310 / "A' in a circle logo - 3 (Chevy Part No. 24334 c.1923) - - 8.5" lug wrench with hammer and pry bar end. Good++.
(5.) WHEATON - - 7.25" cast single square box end wrench.
(6.) TRIMO TRADEMARK - BASIN WRENCH - PAT. APPL'D FOR / ("B" in a shield logo) - - 9.75" screw adjust cast tee handled basin wrench. Excellent. (S92, patent not found)
(7.) J4 (Chevrolet Part No. 22413 and 23413B) - - 6.5" early (1914 - 1922) Chevrolet spinner type lug wrench. Good++
(8.) H87 M1 - - 6" five sided hydrant socket wrench and fire hose coupling tool.
(9.) STILLSON REGESTERED TRADEMARK - WALWORTH MFG. CO - BOSTON USA - - 7" wood handled pipe wrench. Good++.
(10.) STILLSON - 6 /WALWORTH MFG. CO - BOSTON USA - - 6" wood handled pipe wrench. Good++.
(11.) SARGENT - - 7" flat steel four opening wrench with a hook spanner.

PiCs Choice Lots 123 thru 125

Choice Box 126: Lot of Twelve Farm Type Wrenches. Most have issues: not cleaned, pitted, cracked, broken, or repaired.

Choice Box 127: Lot of Five: Four monkey wrenches in incomplete or poor condition and a Bahco - Volvo combination Crescent type and alligator wrench in poor, rusted condition, adjustment stuck.

Choice Box 128: Lot of Six Alligator Wrenches
(1.) AM SAW CO. (American Saw Co - Trenton, NJ) - ALLIGATOR WRENCH - PAT AUG. 3, 1897 - - 7" single ended alligator wrench with wench openings in handle. Design patent was granted to Samuel T. Freas 0f Trenton, N. J. Excellent.  PAT.
(2.) 20 - JOHN A. ROEBLING'S SONS - ALLIGATOR WRENCH - PAT AUG. 3, 1897 - - 7". Single ended alligator wrench with wench openings in handle. See wrench above for patent info. Good++.  PAT.
(3.) Unmarked - - 6.75" double ended alligator wrench. Good.
(4.) THE E. S. AND T. WRENCH - - 8" double alligator wrench with rethreading dies. Poor, pitted. (not listed, no info found)
(5.) CROCODILE - THE HAWKEYE - HAWKEYE WRENCH CO. - MARSHALLTOWN, IA - - 8.25" alligator wrench with rethreading dies and screwdriver. Patented by Charles Benesh of Wahpeton, North Dakota on Feb. 17, 1903. Some pitting, screwdriver tip has grind marks.  PAT.
(6.) EDMONDS METZEL MFG CO - CHICAGO - PATENTS PENDING - UNIVERSAL GRIP - - 8" double ended alligator with rethreading dies. Patent was issued to Jay D. Edmonds of Chicago, ILL. on April 3, 1906 Good+, not cleaned. (S7)  PAT

PiCs Choice Lots 126 thru 128

Choice Box 129: Lot of Six Farm Wrenches
(1.) A (Cockshutt) - - 11.5" Good+ (R1-106)
(2.) S182 / P (Litchfield Mfg. Co.?) - - 10.25". Looks like same wrench as the more common Litchfield M182. Pitted (not listed)
(3.) TC369 (Allis-Chalmers) - - 10". Good++. (R1-11)
(4.) C250 (orphan) - - 11". Good+ with some dings.
(5.) B & G PLOW CO / CANTON O. - - 9.75". Excellent. (R1-31)
(6.) P315 (Verity later Massey Harris) 11". Good++. (R2-282)

Choice Box 130: Lot of Seven Farm Type Wrenches
(1.) 182 (orphan) - - 7.5". Good++, not cleaned.
(2.) 1538 (orphan) - - 9". this may be an automotive wrench, it fits a Franklin hub cap. Good++.
(3.) 16 (A. B. Farquhar - York, Penn.) - - 8.25". Good+. (R1-176)
(4.) 76L (Case T. M. Co.) - - 7". Rare variant without the Case imprint. Good++.
(5.) WESTERN (in script) / N100 - - 6". Good++.
(6.) 541T (orphan) - - 7.25" five opening wrench. Good+.
(7.) 19 (orphan) - - 8". Good+, over cleaned.

Choice Box 131: Lot of Six Farm Wrenches
(1.) D582 (Ohio Cultivator) - - 10" Good++. (R1-357)
(2.) RITTER 1 - 2 - 3 - 4 (same markings both sides) - - 6.75". Non magnetic bronze like metal. Good++
(3.) MOLINE DRILL / A763A - - 8.5". Good+. (R1-332)
(4.) B127 (Same number as an American Plow Co. wrench but not same wrench pictured in Rathbone) - - 9.75". Good+, poor casting on the "B". (see R2-11)
(5.) E39 (Bateman) - - 8.5" with hammer head. Same wrench design and part number as Iron Age Cut-out Wrench. Good++, painted. (R2-27)
(6.) F354 (IHC) - - 7.75". Two square holes, number raised, no logo variant. Painted.

PiCs Choice Lots 129 thru 131

Choice Box 132: Lot of Nine Good for Weld Art Wrenches. One look like it is blacksmith made.

Choice Box 133: Lot of Four Farm Wrenches
(1.) DEERING / PAT SEP 7 97 - - 8.25" all metal Vandegrift monkey wrench. Poor, mushrooming, pitting, jaws sprung. (R1-139)
(2.) MIDLAND MFG. CO. / 1 - TARKIO MO. USA - - 8.5". Pitted. (R1-326)
(3.) OLIVER / CP245 - - 9.25". Pitted. (R1-360)
(4.) UNIVERSAL (CUTOUT letters) - E12 (Ames Plow Co. - Worcester and Ayer, Mass.) - - 5" CUTOUT. Marked with part number variation. Good+, some light pitting. (R1-466)

Choice Box 134: Lot of Seven Farm Wrenches
(1.) W. P. CO. (Wiard Plow Co. - Batavia, NY) - - 9.5". Pitted. (R1-488)
(2.) STAR DRILL 100 (Norris & Brother - Rushville, Ind.) - - 7" with hammer head. Pitted. (R437).
(3.) C338 (P. P. Mast, later Superior Drill Co, later Am. Seeding Mach. Co.) - - 8.75" with hammer head. Good++, not cleaned. (R1-314, R1-446, R1-16)
(4.) J480 (Plano and IHC ) - - 6.5" Pitman wrench Good+. (R1-381)
(5.) MONITOR DRILL / A270 (Monitor Drill Co. - Minneapolis, Minn., later Moline Plow Co.) - - 6.75". Painted. (R1-334)
(6.) D1336 (Moline Plow Co.) (with Moline Iron Works logo) - - 9.5" with hammer poll. Good++. (R1-333)
(7.) NEWELL SANDERS PLOW CO / A163 (later IHC) - - 8.25" with a hammer head. Good+, painted (R1-351)

PiCs Choice Lots 132 thru 134

Choice Box 135: Lot of Six Farm Wrenches
(1.) A375 (Hayes Pump & Planter Co. - Galva - ILL.) - - 3.5" by 6" tee wrench. Good+. (R1-227)
(2.) CASE / 76L - - 7" Grain Drill wrench with stud Good with pitting. (R1-77)
(3.) 131L - IHC logo - - 7.5" x 13.75. Tee socket wrench. Good++.
(4.) H63 (Oliver) - - 6.75" Good+. (R1-361)
(5.) M555 <M-H> in diamond logo (also a dot in a circle logo) (Massey-Harris) - - 5.25". Good++, blackened.
(6.) 141 (orphan) - - 7.5". Good+, some pitting.

Choice Box 136: Lot of Six Farm Wrenches
(1.) Marked only MADE IN USA (JOHN DEERE No. B353R) - - 19". Good++. (D250)
(2.) Unmarked or too pitted to read numbers (Deere No. K806) - - 12.25". Pitted. (D386 or D387)
(3.) INDIANA SILO CO (Anderson, Indiana) / 5/8 - - 10.75". Good+, painted. (R1-249)
(4.) INDIANA SILO CO. - 5/8 - - 10.75". Good+. (variation not in Rathbone, see R1-249)
(5.) Marked only D127 (Sterling Mfg. Co. - Sterling Illinois?) - - 14". Not in Rathbone but same wrench number as marked Sterling wrench (see R1-439)
(6.) D137 (Chattanooga, David Bradley, IHC, Benicia Plow Works,) - - 11". Pitted, painted. (R1-99, R1-50)

Choice Box 137: Lot of Seven Farm Wrenches
(1.) P66 (David Bradley) - - 6.5" Good++ (R1-126)
(2.) 28 (orphan) - - 9.5". Refinished.
(3.) J43 (Stoddard, Gale, Oliver) - - 6.5" With hammer Good++. (R1-361, R1-441)
(4.) ARVIKA-VERKEN / 11041 - 1/2 and 7/16 (Arvika, Sweden) - - 9.5" . Twisted and drilled hang hole thru part of the markings. (R2-14)
(5.) TC224 (Moline Plow Co) - - 7.75" Good++ (R1-333)
(6.) 2 (raised markings) and 114 (indented markings) (orphan) - - 10.25" Good++.
(7.) FA354 (IHC) - - 7.75" with stud on the back side. Good+. (R2-145)

PiCs Choice Lots 135 thru 137

Choice Box 138: Lot of Eight Farm Wrenches
(1.) T147 - C (Grand Detour Plow Co.) - - 7.75". Good++. (R1-205)
(2.) F354 (IHC) - - 8". Two square holes, number indented, no logo variant. Painted.
(3.) 162? (orphan) - - 7.75". Poor, painted, pitted.
(4.) R20 (Burch Plow Co, Crestline, Ohio variant?) - - 7" by 8" combination tee. Some edge damage, pitting. (Rathbone pictures different wrench, see R1-71, R2-46)
(5.) T560 (Kentucky Drill, Hoosier Drill and IHC) - - 5" by 5.75" tee socket wrench with pry bar end. Good. (R1-239, R1-255)
(6.) 124 ("L" in a circle logo) (Collins Plow Co. - Quincy, Illinois) - - 7.25" with hammer poll. Good++. (R 2-62)
(7.) D304 (Eureka Mower Co. - Utica, NY) - - 9" Good+. (R1-169)
(8.) No markings (Messinger Mfg. Co. - Tatamy, Penn.) - - 10". Also looks like a marked Walter Wood's Wrench. Good++. (see Rathbone R2-199 and R1-494)

Choice Box 139: Lot of Seven Farm Wrenches
(1.) P337 (Verity then Massey-Harris) - - 10.5" Good+ with light pitting. (R2-283)
(2.) FP323 (Cockshutt Plow Co.) - - 10" Good+. (R2-60)
(3.) R298 (orphan) - - 10.5". Neat looking wrench. Good++.(not listed, no info found)
(4.) A164 (Minnesota Prison Industries - Stillwater, Minn.) - - 8". Good++. (R1-329)
(5.) MORRISON - 260 (Morrison Plow Works - Ft. Dodge, Iowa) - - 10.25" Emerson style wrench. Good+ (R1-340)
(6.) B60 (orphan) - - 10.5" doe-s wrench. Good++.
(7.) NO 10 DISC (Grand Detour Plow) - - 10.25" with two open ends. One pictured in Rathbone has a broken jaw. Good+ with some pitting. (R1-205)

Choice Box 140: Lot of Seven Farm Wrenches
(1.) C188 - U (Rock Island Plow Co.) - - 10" with hammer head. Marked on large end variation. Good, painted. (R1-400)
(2.) AP19 (orphan) - - 8.5" with hammer poll. Good+.
(3.) H138 (Cockshutt) Plow Co.) - - 7.5". Good+, some jaw edge damaged. (R1-107)
(4.) J181 (E. Bement & Sons (Lansing, Mich.) - - 9.5". Rare wrench, first one we have had to list. good with slight bend. (R1-49, parts book illustration only)
(5.) 768A (Adriance Platt & Co. - Poughkeepsie, NY, later Moline Plow Co.) - - 8". Good++. (R1-5, R1-332)
(6.) N28 (American Harrow Co. - Detroit, Mich. and Windsor, Ontario, Canada) - - 8" with two triangular cutouts variation. Rathbone attributes the N28 wrenches to both the American Harrow Co. and Frost & Wood. Good++. (R1-14, R2-11)
(7.) 26 (with a star logo) (orphan) - - 7.5". Good++.

PiCs Choice Lots 138 thru 140

End of cataloged choice box lots. There may be additional unlisted lots

Back To The Wrenching News Homepage

Copyright 2017 by Don 'Bus' Haury
Webmaster - Don 'Bus' Haury Email: