Adjustable Wrenches - Group One
0001.
HELWIG MFG. CO. / ST. PAUL MINN. - -15" all metal screw adjust monkey wrench. Patented by John Helwig of St. Paul, Minnesota on July 22, 1924. Rare wrench in Good++ condition.
0002. Unmarked - - 8" all metal center screw adjust nut wrench. Rare. Good++. (not listed no info found)
0003.
CLUTCH WRENCH CO / WAUKESHA, WIS. - PAT JAN 7, 02 - - 10" all metal unique quick adjust nut wrench with a spring loaded lower jaw and set screw. Back of lower jaw casting has broken off, exceptional strong markings. (S487)
0004.
GATES BULL (or BOLT) WRENCH - - 10.25" all metal nut wrench with an unique adjusting screw on top of upper jaw. Pat. Feb 15, 87 by Alfonso D. Gates of Cleveland, OH and mfg. by the Lorain Wrench Co. of Lorain, Ohio. Light markings, not all readable, overall light pitting. (S391)
0005. Unmarked early Bemis & Call 11" rack type quick adjust with locking thumbscrew. Rare wrench in Good++ condition.
0006.
CC PAT MAR 1, 1921 OMAHA - - 8.5" nut or pipe wrench that is adjusted with a knurled knob or a tee handle on the end of the wrench. Patented by Gene D. Chenette of Ames, Iowa. Some pitting, jaw chips, weak but readable markings. (S463)
0007. Unmarked - - 8" wood handled center screw adjust nut wrench. Unusual wooden handle looks like it was welded on to the wrench shaft and jaw assembly. Enough examples have been seen to indicate that it was a production wrench and not shop modified. Scarce. (not listed, no info)
0008.
Unmarked (Girard Wrench Mfg Co of Girard, PA) - - 7.25" all metal, malleable screw adj nut wrench patented by C. H. Miller of Erie, PA on 7-11-1882. Good++.
0009.
Unmarked (Girard Wrench Mfg Co of Girard, PA) - - 10' adj. nut wrench patented by C. H. Miller of Erie, PA on 7-11-1882. Scarce size. Good Plus with some light pitting.
0010. Unmarked 15.5" all metal monkey wrench. Usually found marked with a Pennsylvania Railroad PRR in a keystone logo. Crudely made with a reinforcing bar on back of the lower jaw, similar to but more primitive than the Perfect Handle wrenches. These were reportedly made in the Altoona shops of the Penn. R.R. (unlisted?)
0011. Unmarked Collins - - 21" wood handled monkey wrench. Good Plus.
0012. COES WRENCH CO - - 18" knife handled monkey wrench, riveted end cap. Good++. (Page No. 63)
0013. Diamond Edge - Shapleigh Hardware Co St. Louis, MO. - - 18" knife handled monkey wrench. Good++.
0014.
COES WRENCH CO - L. COES PAT'D APR. 30, 1895 - MAY 15, 1900 STEEL - - 18" knife handled nut wrench. Some minor dings, pitting. (variant not listed in Page's book, similar to No. 51)
and
0015. BEMIS & CALL H. & T. CO. - - 18" all metal center screw nut wrench. Good Plus.
0016.
COES WRENCH CO. / L. COES PAT'D DEC 15, 1891, APR 30, 95 - - 15" knife handled monkey wrench, ferrule with spurs type. Good ++. (Page No. 50).
and
0017. COES WRENCH CO SPRINGFIELD, MASS USA / L. COES PATS - - 18" knife handled monkey wrench dating from after the dale of Coes to Bemis & Call. Good++. (Page No. 63)
0018.
A. G. COES & CO. / A. G. COES PAT'D MAR 6, 1866 - -15" wood handled nut wrench with lock type ferrule. Back of lower jaw has hammer damage. (Page No. 12)
0019. A. G. COES & CO. / (steam engine governor logo) - -15" wood handle nut wrench. Good Plus with a few dings and weak markings. (Page No. 14)
0020.
THE BECKLIN WRENCH CO. SEATTLE, WASH / PAT MAR 16, 1920 (etc.) - - 14" quick adjust rack wrench with unique pivoting release lever. Patentees were John H. Lagreid and Oscar Becklin both of Seattle. Good Plus with some minor edge dings. (S713)
0021.
14 MASTERENCH / HELLER - PATENTED (with horse logo) - - 15.5" self adjusting wrench with both jaws serrated and square hole in end variation. Excellent.
0022.
Lot of two adjustable wrenches:
(1.) COCHRAN SPEEDNUT WRENCH, etc / PATENT PENDING - - 9" self adjust nut wrench. Excellent with original finish.
(2.) BOOS TOOL CORP CHROME-MOLYBDENUM KC MO - PATENTED - - 8" turn handle to adjust nut wrench (with grooved top jaw and smooth bottom jaw). Patented by Joseph B. and Lyal R. Boos of Kansas City, MO. Excellent. (S381)
0023.
10 IN LARC-O-MATIC PAT 1830033 - 2351821 / CHICAGO-O.H. TOOLS HEDSTROM INDUSTRIES INC. - - 10". Excellent. (S320T)
0024. 10 IN LARC-O-MATIC PAT 1830033 - 2351821 / CHICAGO-O.H. TOOLS HEDSTROM INDUSTRIES INC. - - 10". Slightly different markings than lot 23. Good Plus. (S320T)
0025.
Lot of two Carll Crescent type with reversible jaws for use as a nut or pipe wrench. The Carll wrenches were patented by A. B. Carll of Boothwyn, PA. Good Plus. (S568)
(1.) 8" CARLL WRENCH - P. T. CO. / PAT'D MAY 6, '13 - - 8".Good Plus
(2.) CARLL / PAT'D MAY 6, '13. - - 6" Good ++
0026.
H. D. Smith & Co. - - 7" all metal offset pliers. Listed as No. 646 "Gittatit" Offset Slip Joint Pliers in H. D Smith (makers of Perfect Handle tools) Catalogs. Marked with patent dates of June 9, 1914 and Feb 20, 1917. Good Plus
0027. WALCO HEX WRENCH NO. 0 / PAT. APPLIED FOR - WALWORTH MFG. CO. - BOSTON USA - - 7.75" Stillson type wrench with jaws for hex nuts and bolts and a tire tool end. Good Plus. (S103)
0028. 6-8 IN. CRESTOLOY STEEL / CRESCENT TOOL CO. JAMESTOWN NY - - 8" Crestoloy Crescent wrench with 6" and 8" heads. Plated, excellent. (S470
0029. 6-8 IN. CRESCENT / 6-8 IN. CRESCENT TOOL CO. - - 8" older style Crescent wrench with 6" and 8" heads. Excellent. (S470)
0030. 12 IN 80 BEMIS & CALL CO. /B & SPRINGFIELD - -12" older Crescent type wrench. Good++.
0031. 92-12 UTICA TOOLS - - 12" Crescent type with a jaw locking lever. Plated, Good++.
0032.
EIFEL-GEARED PLIERRENCH - 8-1/2" -48 - $6.00 - - 9" plier wrench dated 1948, Excellent like new.
0033. WESTCOTT KEYSTONE MFG. CO. / NO.78 BUFFALO NY - - 8" curved handled Crescent type. New Old Stock with original box labeled "1/2 dozen Westcot Adjustable "S" Wenches". NOS never used.
0034.
Lot of two:
(1.) PECK STOW & WILCOX CO / 10 IN ANGLE ADJUSTABLE - - 10" Crescent type wrench. .Good++.
(2.) Unmarked - - 9" tank type wrench. Excellent, like new.
0035. HEAVY DUTY - - 4.75" pipe wrench shaped belt buckle. Made by Bergamot Brass Works. Excellent.
0036. MADE IN USA - - 4.5" Crescent wrench shaped belt buckle, Made by Bergamot Brass Works. Excellent.
0037. Picture frame - - 6.5" by 8" decorated with woodworking tool models. Excellent.
0038. 1924 TELEPHONY'S DIRECTORY OF THE TELEPHONE INDUSTRY - - 6" by 9" with 294 pages. Full of adds on old telephones and lineman equipment. Good Plus.
0039. AUDEL'S NEW ELECTRIC LIBRARY - - 5" BY 8.5". Five volumes printed 1929 through 1936. Early electrical guide with great illustration of old electrical devices and equipment. Good++.
Four Inch Crescent Type Wrenches
0040. TIGER / TIGER - USA - - 4" Crescent type wrench. Repaired.
0041. J. H. WILLIAMS & CO. USA / 4" "SUPERJUSTABLE" - - 4" Crescent type wrench.
0042. CRAFTSMAN / VANADIUM - - 4" Crescent type wrench.
0043. WARDS MASTER QUALITY - - 4" Crescent type wrench with embossed lettering.
0045. BARCALO-BUFFALO USA / 4IN DROP FORGED STEEL - - 4" Crescent type wrench with round hang hole.
0044. FORGED - BARCALO / STEEL - BUFFALO USA - - 4" Crescent type wrench with the distinctive tear drop hang hole.
0044. FORGED - BARCALO / STEEL - BUFFALO USA - - 4" Crescent type wrench with the distinctive tear drop hang hole.
0046. BET'R-GRIP - J. P. DANIELSON CO. - JAMESTOWN, NY - - 4" Crescent type wrench with 5/16" hex box wrench on end.
0047. BET'R-GRIP / J. P. DANIELSON CO. - JAMESTOWN, NY - - 4" Crescent type wrench with 5/16" hex box wrench on end.
0048. BET'R-GRIP / FORGED VANADIUM STEEL - - 4" Crescent type wrench with 5/16" hex box wrench on end.
0049. Lot of two different PROTO four inch Crescents.
0050. Lot of two different UTICA four inch Crescents.
0051. Lot of two different DIAMOND CALK HORSESHOE four inch Crescents.
0052. AIGO - - 4" Crescent type wrench.
0053. CHINA / FORGED STEEL - - 4" Crescent type wrench.
0054. Love of three 4" Crescent brand wrenches. All different.
0055. Love of three 4" Crescent brand wrenches. All different.
0056. Lot of three 4" Crescent brand wrenches. All different.
Adjustable Wrenches - Group Two
0057.
Lot of two: Self adjust nut wrenches
(1.) INSTANT-GRIP - WESTERN GERMANY - - 8" with one serrated jaw. Good Plus.
(2.) RAPID GRIP 10 / TANGUY TOOL CO. - GLEN MILLS, PA 19342 - PATENT 3101018. - - 10" with plastic handle covering. Good Plus.
0058.
BOSTON WRENCH CO BOSTON, MASS. PAT'D OCT 2, 1906 - - 8" wooden handled rack and wedge quick adjust. Patented by Alphage Gagnon of Springfield, Mass. on Oct. 02, 1906. Usually found as an all metal wrench, this one was modified by Herb Page for Ralph Kay and evidently purchased by the consignor at one of the Kay auctions. Good++ with expertly replaced handle and ferrules. (similar to S480)
0059. MAUSER (logo) / REINER - - 9" comb. screw and quick adjust nut wrench. Rack teeth on front of shaft. Different quick adjust mechanism and markings than usually found. Excellent. (not in Schulz)
0060.
F. W. Macke & Co Quickset Wrench - Kokomo, Ind. - PAT. APRIL 22 - 1919 - - 6.5" all metal screw and quick adjust. Rare size in Excellent condition.
0061.
8" CYGNET WRENCH / CYGNET MFG. CO. PATENTED BUFFALO, NEW YORK - - 8" Crescent type with a pivoting head that allows the jaws to ratchet. Patented by Henry D. Rahling of Buffalo, NY on Oct. 2, 1923. Good Plus. (S468)
0062. BEMIS 7amp; CALL - SPRINGFIELD, MASS - - 6" all metal monkey wrench in Good++ condition.
0063.
GELLMAN MANUFACTURING. COMPANY - ROCK ISLAND, ILL - POLLY / PATENTED APRIL 17, 1923 - 9 IN. NO. 121 (etc.) - - 9" external spring variation. Good++ (S522)
0064.
E. C. STEARNS & CO SYRACUSE, NY USA - - 8" William Baxter's "S" model double ended wrench, First patented Dec 1, 1868. Good Plus (like S305, C290)
0065. Unmarked - - 6". William Baxter's "S" model double ended wrench. Good Plus. (S305)
0066. HANDY 101 - NO 3 / I.C.I. - PAT PEND - - 9.5" malleable comb. tool with two pliers, sc/dr, wrenches, hammer, nail claw, ruler, etc. Good++. (S813)
0067. GIRDER MAJOR - JOSEPH LUCAS LTD. - BIRMINGHAM / Lucas (spoked wheel and torch logo) - 7.25" center screw adjust, both sides exposed. Good Plus.
0068. MAUSER (logo) - GERMANY - - 9.5" comb. screw and quick adjust nut wrench. Rack teeth on front of shaft. Good Plus.(S515)
0069.
GELLMAN MANUFACTURING. COMPANY - ROCK ISLAND, ILL - POLLY / PATENTED APRIL 17, 1923 - 12 IN. NO. 121 (etc.) - - 12" external spring variation. Good Plus with light grind marks on jaws. (S522)
0070.
EVER-GRIP (on side of lower jaw) - - 10" with smooth jaws. Note this is a nut wrench not the more commonly seen pipe wrench. Patented 9-7-1915 by William Estes of Ozark, Missouri. Good++. (Similar to S626)
0071. ELITE GES GESCH / MADE IN GERMANY - - 6.25" center screw double jaw nut wrench with tool holder on end of handle. Two tool bits in hollow handle. Good++. (S768)
0072. TRANS ATLANTIC CLOCK & WC. / D.R.G.M. GERMANY - - 6.25" center screw double jaw nut wrench with tool holder on end of handle. Two tool bits in hollow handle. Some light pitting, some weak markings. (similar to S768);
0073. Unmarked - - 5.5" odd little screw adjust nut wrench with threaded handle shaft and knurled adjusting nut. Rare. Good Plus. (no info found)
0074.
HARDY & CARTER - BOSTON / "PAT PENDING" - 4.75" double screw adjust pocket wrench advertised as "The Quick Wrench" . Patented by Carl Tinglof patent on July 17, 1894. Some light pitting, some weak makings, (not in Schulz, see Cope pg 157)
0075. "GIRDER" NO, 91 - JOSEPH LUCAS LTD. - BIRMINGHAM - PAT APP'D FOR / (spoked wheel and torch logo) - - 5.5" center screw adjust nut and pipe wrench with exposed shaft and unique pivoting pipe jaw attachment. Good Plus.
0076. FOOTPRINT (with footprint logo) - MADE IN ENGLAND - - 6" small size Foot Print pliers with screwdriver end. Excellent.
0077. HUE (inside horseshoe logo) PATENT HUBER NO. 1 - MADE IN GERMANY - - 6" shim adjust nut wrench. Excellent.
0078. "GIRDER " - JOSEPH LUCAS LTD. - BIRMINGHAM / (spoked wheel and torch logo) - - 4.5" center screw adjust pocket wrench with exposed shaft. Good Plus with weak markings.
0079.
A. G. COES & CO. - WORCESTER MASS / A.G. COES PAT'' DEC 26, 1871 - - 12" jog bar wood handled monkey wrench. Good Plus with a professionally replaced handle, light markings. (Page No. 19)
0080.
A. G. COES & CO. - WORCESTER MASS / (steam engine governor logo with 5-2-1871 and 12-26-1871 patent dates) - - 10" wood handle jog bar monkey wrench. Good Plus. (Page No. 21)
and
0081.
A. G. COES & CO. - WORCESTER MASS / (steam engine governor logo with 12-26-1871 patent date) - - 6" wood handle monkey wrench. Good . (Page No. 20 except the markings on the jaws are on different sides of the wrench)
0082.
RUGGLES, NOURSE, MASON & CO - BOSTON & WORCESTER - MASS / L. COES PATENT - - 10" early Coes wooden handled monkey wrench with plugged lower jaw dating from 1848 to 1853. Manufactured under Coes first wrench patent of April 16, 1841. This rare wrench has several surface dings. the markings are not all readable, and the handle is an excellent replacement. (Page No. 3)
0083. BILLINGS - MADE IN USA (with a "B" in a diamond logo) - - 8" all metal Coes type monkey wrench. Probably one of the last Coes wrenches made. Good++. (Page does not list these Coes/Billings wrenches in the 8" size)
0084. COES WRENCH CO - SPRINGFIELD, MASS - MFD UNDER L. COES PAT'S - STEEL - - 8.5" all metal monkey wrench made by Bemis & Call. Good++. (Page No. 63)
0085. COES WRENCH CO - WORCESTER, MASS - MFD UNDER L. COES PAT'S - STEEL - - 8.5" all metal monkey wrench. Last model made by Coes, Excellent. (Page No. 61)
0086.
A. G. COES & CO. - WORCESTER MASS / (steam engine governor logo with 12-28-1875 patent date) - - 6" wood handle monkey wrench. Good . (Page No. 23)
0087. THE H.D. SMITH & CO - ORIGINAL PERFECT HANDLE TOOLS - SEMPER IDEM - STEEL WRENCH 15" / TRADEMARK (with "S" in circle logo) - - 15.5" all metal monkey wrench. Excellent.
0088.
BEMIS & CALL SPRINGFIELD, MASS - PAT AUG 1866 - 12.5" center screw adjust wooden handled pipe wrench (hex adjusting nut variation). Early patented pipe wrench in Good Plus condition.
0089. BEMIS & CALL CO H & T CO. - SPRINGFIELD, MASS / (B & C logo) - - 10" Coes type monkey wrench with wooden knife type handle. Good Plus.
0090.
BEMIS & CALL CO SPRINGFIELD, MASS / A. D. BRIGGS PATENTED APR 26, 1859 - - 10" nut wrench with threaded shaft and long threaded sleeve. Nice example of a pre Civil War wrench patent. Good Plus.
0091. BEMIS & CALL H & T CO. - SPRINGFIELD, MASS / (B & C logo) - - 8.25" wood handled center screw adjust nut wrench (long sleeve variation). Good++.
0092.
COLLINS & CO. - HARTFORD USA - PAT OCT 10, 1865 - - 8" wood handle monkey wrench. Replaced handle.
0093. W. G. COE - PATENTED - - 10" wood handled Coes 1841 patent type monkey wrench. Probably made by the Coe company that primary manufactured bookbinding equipment hoping to take advantage of the similar names. Scarce wrench in Good Plus condition.
Combination and Fencing Tools
0094. Unmarked - - 11" all metal ball pein hammer with tire tool end. Some mushrooming on hammer edges otherwise Good++.
0095. CRONK - - 7.75" slide type quick adjust with three open ends on opposite end. Mfg by Cronk & Carrier Mfg Co of Elmira, NY. Pitting, mostly on one side. (S451)
0096. Unmarked - - 9.5" comb. adjustable wrench and hammer made to L. S. and E. G. Hoyt's (Croton Falls, Mass.) patent of May 29, 1866). Weld repair. (S882)
0097. VULCAN AUTO TOOL / PATENT PENDG / J H WILLIAMS CO BROOKLYN, NY USA - - 7.5" comb. tool with at least twelve functions inc. a hammer, alligator wrench, sc/dr, bottle opener, etc. Good Plus. (S66, C337)
0098.
ALBERT LEA MFG. CO. ALBERT LEA, MINN / PAT APR 3, 06 - - 7.75" comb pivoting head tool with nipper and plier jaws. Patented by Ole Medhus of Faribault, Minnesota. Good Plus with light markings. (S280)
0099. THE "TEDDY" SCREWDRIVER / MARSHALLTOWN, IA - PAT A - - 9.25" Morris' combination alligator wrench, hammer, and screwdriver tool. Excellent.
0100.
PAT NO 579210 - REG DES 841889 - BRITISH MADE - - 9." Utilex comb. Crescent type wrench with hammer, screwdriver, nail puller, ruler, file. An American patent was issued to Bernard Forster of Manchester, England on Oct 31,1950. Some pitting. (S752)
0101.
Unmarked - - 13.5" wooden handled claw hammer with a nail puller, staple puller and notches under the claw to be used as a alligator type nut wrench. Patented by John Hebblethwaite - Rock Falls, Illinois on Sep. 11, 1888. Advertised in the 1915 Sears & Roebuck catalog as the Fulton Utility Hammer. Good Plus. (S796)
0102. Unmarked - - 11" all metal ball pein hammer with tire tool end. Excellent.
0103. Marked only JAPAN with an original decal marked S. T. ED - PAT 46-8680 & 45-7411 - - 8" comb. plier type tool with hammer, wire cutter, tack claw, screwdriver, bottle opener, etc. Excellent with plastic strips wrapped around the handles. (not listed)
0104.
PATENTED USA 5345636 / 12" CHROME VANADIUM - - 12" Crescent type wrench with a large flat hammer poll. Excellent, like new. (not listed)
0105. Marked only TAIWAN - - 9" multi-purpose Vise-Grip type wrench with a hammer poll, six different jaw functions, and a hook for hanging tool or maybe for pulling staples? Plated, Excellent, like new. (not listed)
0106.
G. M. CO. - L. I. CITY, NY, (etc.) - 8.5" comb tool with a quick and screw adj nut wrench, hammer, pry bar with nail puller. Patented by George S. Iskyan of Jackson Heights, NY on Sep. 07, 1954. Plated, Excellent like new. (S791)
0107. 8" BAHCO 31 - SWEDEN / VOLVO - AB BAHCO STOCKHOLM (etc.) - - 8" Crescent type wrench with alligator wrench on end. Some spots of pitting.
0108. CRAFTSMAN - - 10" "dog bone" wrench with four different rotating box end wrenches on each end. Good Plus with owners mark on one side.
0109.
FAMOUS 8 IN 1 / STEGER SALES CORP SOLE DIST'B'RS TULSA OKLA - - 8" comp plier tool with hammer, nail claw, sc/dr, open end wrenches, etc. Patented as a "Wire Stretcher Tool" by James O. Smith of Mounds, Oklahoma on Dec. 17, 1929. Good Plus. (S1095)
0110.
E. RIPLEY PATENT APRIL 7, 1857 (same markings on both side) - - 12.5" comb. hammer sc/dr, and rack quick adj wrench. Very early version of Ripley's patent. Some pitting. (S824)
0111. JOS. H. SEED NEW YORK / DESIGN PATENTED - - 4.5" comb. tool advertised as the "Four In-Hand Combination Bicycle Tool" with hammer, sc/dr, tack puller, wrench for five different sizes, and a spoke wrench (S100B, C276)
0112. JAMCO - - 12.5" odd combination tool with two hammer heads. excellent (not listed, no info)
0113. MMCC - G. WUSTE - REMSCHEID (with a three horse head logo) - - 8" odd combination hammer and open end wrench tool. Excellent. (not listed, no info)
0114. WALCO HEX WRENCH NO. 0 / PAT. APPLIED FOR - WALWORTH MFG. CO. - BOSTON USA - - 7.75" Stillson type wrench with jaws for hex nuts and bolts and a tire tool end. Excellent, like new. (S103)
0115. Marked only MADE IN GERMANY - - 6" comb. plier comb. tool with hatchet, hammer. screwdriver, tack puller. Excellent like new with original finish.
0116.
NATIONAL PLIER CO - BUFFALO, NY - PATD NOV 19, 1907 - - 7.25" comb. pliers and hammer tool. Christopher J. Haeberli of Buffalo, New York. Good Plus. (S265)
0117.
CRESCENT TOOL CO. JAMESTOWN, NY / 5 IN. PATENTED - - 8.25" comb. screwdriver and hammer tool. Patented Feb. 6, 1917 by John Emil Johnson of Jamestown, NY. Good Plus.
0118. Marked only JAPAN - - 8" comb. plier type tool with hammer, wire cutter, tack claw, screwdriver, bottle opener, etc. Good++.. (not listed)
0119. Lot of two 8" hammers with brass hollow handles that hold a nest of screwdrivers. One is complete and one lacks the screwdrivers.
0120. Unmarked - - 9" pliers with nipper head for the Koeth Combination Kit with interchangeable jaws. Pitted, handle spring is broken.
0121. A. J. GERRARD CO - CHICAGO - 500 - - 9.75" comb. snips, hammer, nail puller, and sc/driver. Good++ (not listed, no info)
0122. MILLER FALLS CO. - - 7" wooden hollow handled hand vise and tool holder with six tool bits inside handle. Good Plus.
0123. HUNTER - ST LOUIS TRIM-A-WATE - P-100 - - 10" plier type tool with hammer, crimper, screwdriver, etc. For wheel weights? Excellent, like new.
0124.
NEVER-STALL - PATENTED /- DROP FORGED STEEL - - 10.5" comb. tool with adj wrench, pliers, sc/dr, nail claw, etc. Made at various times by Mathews, Forshee Mfg, and Thomas Mfg. Co. all of Dayton, Ohio. Excellent (S818, C213)
0125. NEVER-STALL - MATHEWS DAYTON, OHIO /PATENTED - DROP FORGED STEEL - - 10.5" comb. tool with adj wrench, pliers, sc/dr, nail claw, etc. This one has a hammer head added to the upper jaw. Good++. (S818, C213)
0126. Unmarked - - 11" saddler maker's hammer with tack puller claw. Some damage to claw otherwise Good Plus.
0127. P. S. & W (Peck, Stow & Wilcox) - - 8" nippers with screwdriver, and nail puller claw. Good++.
0128. BRIDGEPORT HARDWARE MFG. CO. - - 12.5" wooden handle box or crate hammer. Good.
0129.
Unmarked (seen before with original package labeled K & F HANDY-PLIER - TONSCO TAIWAN PAT 4,614,001) - - 10.25" modern comb tool inc hammer, pipe wrench, nail puller, and several pliers. Excellent, like new,
0130. Unmarked - - 10.5" odd malleable double jawed pliers type tool. Good Plus. (not listed, no info)
0131.
A. S. CO. COLUMBIA / PAT. JULY 25, 1893- - 6.5 wooden handled hammer and tack puller. Patented by George J. Capewell of Hartford, CT. Good++.
0132.
Lot of three: Combination household tools:
(1.) VICTOR - PATS APRIL, 17, 1900 - AUG 12, 1902 - - 7" malleable iron comb. tool with at least seven functions. Patented by Moses Hawks of New York, NY. Good++.
and
(2.) Unmarked - - 5.25" malleable comb. tool with at lest eight functions including a corkscrew, glass cutter, hammer, can openers, knife sharpener, etc. Patent for the glass cutter was issued to Samuel G. Monce of Bristol, Conn. on Jun. 08, 1869, Good Plus.
(3.) THE "HOT" PAN LIFTER - E. L. WATROUS MFG. - DES MOINES, IA - PAT APD FOR - - 7" stamped steel kitchen tool. Good++.
0133. Unmarked - - 11" malleable comb. hammer, wrench, nail claw, etc. Some minor mushrooming.
0134. Unmarked - - 10.25" comb. hammer and open end wrench. Shop made? Identified as "Plow Hammers" in Baird's hammer book (page 113). Painted black.
0135. Marked only "8" (Moline Plow Co.) - - 10.5" malleable comb. hammer, nail claw and square box wrench (hollow handle variation). Good Plus. (R332)
0136.
Unmarked - - 9" malleable comb. hammer, screwdriver, wrench, and hoof pick. Design patent 19,913 was issued to Frank J. Herrick of New Britain, CT on Dec. 20, 1889. Excellent.
0137. Marked only "8" (Moline Plow Co.) - - 10.5" malleable comb. hammer, nail claw and square box wrench (solid fluted handle variation). Good Plus. (R332)
0138. Unmarked - - 9" wagon hammer and pin with pry bar end, May be shop made. Pitted, painted black.
0139. Unmarked - - 9" odd malleable comb. hammer, nail claw and four different wrench openings. Good Plus.
0140. Unmarked - - 12" all metal primitive comb. hammer tool. Identified on owner's tag as an " Iron combination Fence Tool" Pitted or may be shop made?
0141. BELL SYSTEM / STANLEY - - 16.5" comb. hatchet and lag bolt wrench. Good++ with painted handle.
0142. Unmarked - - 15" all metal Cooper's combination barrel bung hammer. Good Plus. (Baird's Hammer Book, pg 37)
0143. Unmarked - - 13" odd all metal hatchet, hammer, nail puller, alligator wrench, chisel, etc. comb. tool. Owner's tag identifies as "Fence Tool" Good Plus, (not listed, no info found)
0144.
DROP FORGED - PATENTED SEPT. 28, 1909 / MINNEAPOLIS, MINN. - - 13.5" all metal comb. tool with hammer, nail puller claws, pry bar with nail puller, ruler markings, and a notched alligator type wrench. Patented by William Carr of Minneapolis. Impressive looking rare tool. Some mushrooming (S1044TR, C90)
0145.
PAT NOV. 20, 94 - 9.5" malleable comb. fencing tool with a hammer, staple puller, nail puller, fence wire splicer, and alligator wrench. Patented by John Hebblethwaite - Rock Falls, Illinois. (C163, S793 shows a similar wrench marked "Everlasto - Sterling, Illinois"). Poor because of severe pitting, painted black.
0146. Unmarked - - 12" all metal fencing tool with a hammer, alligator wrench, nail claw, and pry bar. Similar to the Carr patent tool (lot 144). Good Plus.
0147. SECURITY (on both sides) - - 10" malleable hammer with nail or tack puller claw. End of one claw is broken, otherwise Good++.
0148.
J C DIKES / PAT JULY 5, 1910 - - 11" all metal claw hammer. This hammer is shown in a patent for a combination fencing tool issued to Johnnie C. Dikes of Brownwood, TX. Excellent (not listed in the fence tool or hammer books)
0149. Unmarked - - 18" odd hammer. Owner's tag identifies as "John McCormick's Patented Staple Puller and Hammer". Handle painted, some mushrooming.
0150. Unmarked - - 12.5" comb. fencing pliers with hammer head, pry bar, staple or nail puller. Good, over cleaned with grind marks.
0151.
Lot of two: Fencing pliers.
(1.) CRONK - - 8.25" pliers with wire cutter. Good++.
(2.) PAT APR 23, 1901 - - 10" different fencing plier with hammer head, Hole drilled over patent date, otherwise Good Plus.
0152.
EFFICIENCY TOOL CO. - MILWAUKEE, WISCONSIN - EFFICIENCY - PAT. APPL'D FOR - - 8" comb. pliers with two open end wrenches on the ends. Pat. by Anton Myer on Jan. 16, 1923, advertised as a "Five-in-One-Tool. Good++. (C127)
0153. GRIFFITH TOOLS WORKS, PHILA USA - PAT-PEND / GERMANTOWN HAMMER WRENCH - - 14" all metal comb. hammer, lug wrench, and tire tool. Excellent, like new.
0154.
THE HAWKEYE - HAWKEYE WRENCH CO. MARSHALLTOWN, IA / PAT. 720554 - PAT'S PENDING - - 8" S-shaped double ended alligator wrenches with three rethreading dies. Patented by Charles Benesh of Wahpeton, North Dakota. Good Plus.
0155.
PAT MAY 22. 1900 - - 10.25" fencing pliers with hammer head and an unusual extension bar perpendicular to the jaws (used for leverage in pulling staples). Patent 650,186 was granted to George D. and Lynn C. Maxson of Edmeston, NY. Good++.
0156. CRESCENT TOOL CO - 1907 - - 10" owner enhanced fencing pliers with an added hammer head.
0157. AMERICAN A. S. & CO - -10" fencing piers that has been shop modified by neatly welding a hammer head and claws to the side of the jaw. One of a kind.
0158. Unmarked - - 9.5" hammer combination fencing tool. Patented May 8, 1888. Mfd by the Faust Tool Co., San Antonio, Texas. Pat. May 8, 1888. . Good Plus.
0159. Unmarked - - 9.75" Kitselman Wire Tool comb hammer, staple puller, and wire twister plier type tool. Good++.
0160.
RANCHMAN , etc. - - 13" 12.25" hatchet comb. tool with hammer, pincers, wire cutter. John Morris Pat of July 19, 1898 probably applies. Pitted, welded replacement handles.
0161. FARMER'S EVER-READY TOOLKIT / DROP FORGED STEEL - - 11.5" comb fencing tool inc. hatchet, hammer, ali wrench, pliers, sc/dr, and more. Good Plus. (S803)
0162.
FENCE MASTER - - 10" comb fencing tool inc. hammer, nail claw, cutters, pliers, etc. Patent was issued to Howard David Andrews of Salinas, Calif. on Feb. 22, 1949. Pitted. (not in Schulz)
0163. Unmarked - - hatchet comb. fencing tool. Handles have been welded and ground.
0164.
RANCHMAN - K. L. RYMAN - NEWARK, N.J. / FORGED TOOL STEEL - - 12.25" hatchet comb. tool with hammer, pincers, nail claw, sc/dr and leather punch John Morris Pat of July 19, 1898 probably applies. Haven't seen the Ryman name on this tool before. Good++, punch missing. (S802)
0165. RED VIKING BOX 228 BLOOMFIELD, IND - PAT PEND.- - 11" comb fencing type tool inc hatchet, hammer, plier wrench, sc/dr, etc. Excellent, like new with original red finish.
0166. Unmarked - - 24" comb. hammer and fence stretcher. Identified as a "Wide Eclipse Lever Stretcher" in the fencing tool book. Good++.
0167.
PAT'D JAN 2, 1900 - MAY 14 . 1901 - - 17" comb. fence stretcher and wire cutter. Patented by Daniel Stetler of Medford in Oklahoma Territory.
0168. Marked only D-7 and D-8 - - 18" identified as an "American Wire Fence Co. Stretcher" in the fencing tool books. Good++.
0169.
MADE BY STRIBEY & FOOTE CO. - NEWARK, NJ - PAT. SEPT. 19, 1904 / THE COULTER TOOL CO. SAN ANTONIA, TEXAS - - 18" comb. plier type tool with leather punch, sc/dr, nail claw. wire cutter, etc. Patented by Newton J. Tate of Weatherford, Texas. Good++ (leather punch missing).
0170. PEUGEOT FRERES (Peugeot Brothers) - 1918 - MADE IN FRANCE - 14" wooden handle World War One concertina barbwire cutter . Some minor pitting, cracks in handles.
0171. Unmarked - - 12.5" comb. fencing pliers with hammer head, pry bar, staple or nail puller. Good++ with original plating.
0172.
Unmarked - - 12.5" Wm. Hjorth Jamestown N.Y. - Pat Dec 15, 1896 "Lightning Wrench". Combination wrench and pliers (with wire cutter, screwdriver, and tack puller). Patented by John F. Tiner, Sutherland Springs, Texas. Good Plus.
0173.
Lot of two: Fencing pliers
(1.) CRONK - - 10.75' double hammer style. Some pitting.
(2.) CRESCENT TOOL CO. - - 8" Cronk style pliers. Pitting.
0174. Unmarked - - 10" wire grip or tug. Shop made. Good++.
0175. LITTLE QUEEN / PAT. PEND. - - 8" combination hammer, staple puller and wire tightener. Good++.
Buggy and Wagon Wrenches
0176.
DIAMOND WRENCH CO. - STEEL FORGED - PORTLAND, MAINE / PATD NOV 2, '80 OCT 16, '83 - - 12". A large wing nut on a threaded shaft adjusts the double headed wrench (one with regular nut wrench jaws and the other for buggy or wagon nuts). Patented by H. A. Thompson of Farmington, Maine. Good Plus with some hammer dings on sides of jaws and jaw edges. (S208)
0177. Unmarked - - 9.25" wagon hammer and pin with pry bar end, Good Plus.
0178. Lot of five buggy wrenches all marked with an "E' in a circle logo (Eberhard Mfg Co., Cleveland, Ohio).
0179. Lot of three buggy wrenches including one marked 3810C (with a "D" in a square logo).
0180.
AMERICAN WRENCH - PAT. SEPT. 8, 85 - AUGUSTA, MAINE - - 7" with fluted wooden handle. Neat small size. Very weak markings, some minor jaw mushrooming. (S231, C40)
0181. Unmarked (Miller Falls Co of Miller Falls, Mass.) - - 8.25" screw adj with metal spinner handle (square head variation). Good Plus. (S207)
0182. Marked only 322C - - 8.25" Studebaker/Harper style buggy wrench. Good++.
0183. HENNEY B - - 7.5" Dayton style buggy wrench. Area of pitting. (R1-229)
0184.
Marked only PAT PEND - - 5.5" leaf spring spreader for greasing springs. Patented June 8, 1915 by John H. Stevenson and Frederick Knowlson of Ann Arbor, Michigan. Listed as the Knowlson No. 1 Spring Spreader made by the Spring Leaf Lubricator Co. of Ann Arbor, Mich. in a 1920 ad. Good++ with plating.
0185. Marked only BUFFALO NY - 7.5" unmarked G. A. Hosmer & Co. combination plier type buggy wrench with four open end wrenches. Good Plus. (S198)
John Deere Wrenches
0186. Marked only MADE IN USA (John Deere A577R) - - 26" John Deere tractor offset lug wrench and pry bar. Excellent.
0187. 154 (Syracuse Chilled Plow / Deere) - 15" with hammer head. Pitted. (D27, R1-448)
0188. B596R - MADE IN USA (Deere) - - 12" Good++ (D256, R1-133)
0189. 196 (Deere Plow Works) - - 7" long slots with two round holes on double end variation. Pitted. (D 37)
0190. 1_6 (196 Deere Plow Works) - - 7.25" Rare solid on double end with no "9" in "196" variation. Excellent. (D40)
0191. A522 / DEERE MANSUR CO - - 7.5" reverse markings variant. Excellent. (D172, R1-139)
0192. LETZ E782 (Deere) - - 7" Deering pattern. Good Plus. (D308, R1-296)
0193. JOHN DEERE / TY19946 - - 8" Crescent type adjustable wrench. Excellent, like new . Plated.
0194.
Lot of two: John Deere pressed steel wrenches.
(1.) JD50 - - new green paint.
(2.) JD51 - - reverse markings variation, new green paint.
0195. Unmarked (1819R Waterloo Boy and John Deere) - - 8.5" extended socket for Waterloo Boy and first John Deere "D" tractor cylinder head bolts. Wrench marks on shaft. (D84)
0196. DEERE A196 - - 8" CUTOUT with part number above small square box. Pitted. (D157)
0197. D & M - 6.75". Excellent. (R1-139, D-303)
0198. 31 (Deere and Hart-Carter) - 8.5" tee wrench with number on right side variant. Some socket edge damage. (D6)
0199. DAIN / Z-78 - - 6.5" pitman wrench. Excellent. (D-563, R1-121)
0200.
Lot of two: Deere wrenches.
(1.) A522 / DEERE MANSUR CO - - 7.5" reverse markings variant. (D172, R1-139)
(2.) VAN BRUNT - - 7" with space between Van and Brunt variation. Pitting. (D-281, R1-469)
Misc. Farm Wrenches. Etc. - Group One
0201.
THE HANDY WRENCH PAT MAR 30 1926 - 22" chain drive cylinder wrench. Mfg. by Port Huron Machinery & Supply Co. of Lincoln, Nebraska and Pat. Mar. 30, 1926 BY Reuben D. Litwiller of Seward, NE. Good Plus. (S46, R1-215)
0202. D189-D190 (Moline Plow Co) - - 7.5" corn check row pliers. Good++. (R1-333)
0203. P252 - P253 (orphan) - - 7.5" check row pliers. Good Plus. (not listed, no info found)
0204. 95N (with IHC logo) - - 23.5" threshing machine tooth wrench and straightener. Good Plus. (R1-252 and 254)
0205. X899 (Aultman-Taylor - Mansfield, Ohio)- - 23.5" threshing machine tooth wrench and straightener. Good Plus. (not in Rathbone)
0206. Unmarked - - three prong cast iron malleable oil can holder,
0207. 248 (IHC / Plano)- - four prong cast iron malleable oil can holder,
0208. Pair of cast iron buggy or wagon steps. - - 8".
0209.
Lot of two: Disk type "look-alike" wrenches.
(1.) DISK (Janesville Machine Co., Janesville, Wisc., later Samson Tractor Co.) - - 14.5". (R1-265)
(2.) D127 (Sterling Mfg. Co. Sterling Ill) - - 14" (not in Rathbone)
0210. STERLING M'F'G. CO. STERLING ILL. D127 - - 12" with large striking lettering. (R1-439)
0211. GENERATOR DELCO-LIGHT / SPARK-PLUG 28248 - - 8.75". Excellent (not in Rathbone)
0212. FAIRBANKS-MORSE / 26 - - 6" forged doe. (not in Rathbone)
0213. 883 (Case Plow later M-H) - - 15". (R1-311)
0214. 5089 (Avery Co, Peoria, ILL) - - 10". 3 socket variant. Good Plus. (R1-26)
0215. C338 (Superior Drill Co) - - 9" with hammer head. Excellent (R1-446)
0216. 4A44 (with a horizontal "T" logo) (Caterpillar) - - 6" (not in Rathbone)
0217. COLLINS PLOW CO 124 - - 7.5" Good++. (R1-108)
0218. MONMOUTH (Monmouth Plow Co, Monmouth, IL)- - 7" (R335)
0219. IRON AGE C9 (A. B. Farquhar, York, PA and Bateman Mfg. Grenlock, NJ) - - 6.5" CUTOUT. Large square box end variant. Painted, Good Plus. (R1-260)
0220. PLANET JR. / 3 - - 6.5" CUTOUT. Painted black. (R1-380)
0221. 379 / S.B.C.P. CO. (in logo) (South Bend Chilled Plow Co, South Bend, Indiana) - - 9" with hammer head. Logo faintly marked as usual. (R1-429)
0222. BAILOR PLOW CO ATCHISON KAN. C49 - - 10" Pitting. (R1-38)
0223. C188 (Rock Island) - - 10.25" with hammer head. Marked on big end variation. Good Plus. (R1-400)
0224. MOLINE DRILL / A1037 - - 8.5". Good++. (R1-332)
0225. AMERICAN HARROW CO DETROIT DISC DD36 - - 15" Good++. (R1-14)
0226. LEHR L15 - 9.5" with hammer head. Some pitting. (R295)
0227. C146? (Dempster?) - - 9". Pitted. (R143)
0228. AJAX & / SUPERIOR (Rock Island) - - 9". Pitting. (R1-401)
0229. E39 (Iron Age - A. B. Farquhar, York, PA and Bateman Mfg. Grenlock, NJ ?) - - 9" with hammer head. Same number as large Iron Age cutout wrench. Excellent. (not in Rathbone)
0230. 479 (oddball orphan) - - 12.25" unusual tee wrench similar to Moline B355 and Madison Plow / Fuller & Johnson 2H33. Good++.
0231. Unmarked C20 (Gale) - - 8" oddball. Pitting. (R1-193)
0232. GDP CO. / G111 (Grand Detour Plow Co., Dixon, Illinois) - - 10". (R1-205)
0233. D888 (Ohio Rake) - - 9" with hammer head. Excellent. (R359)
0234. J-1 - HALL (in a diamond logo) (Hall Mfg. Co. Monticello, Iowa) - - 10" . One of the rarer Emerson style wrenches. First one we have listed. Good++. (R1-213)
0235. CHASE PLOW CO B35 - - 10". Good++. (R1-97)
0236. KINGMAN PLOW CO / N80 - - 9". Minor pitting. (R284)
0237. WOOD - - 11.5" with hammer head. Excellent. (R1-494)
0238. CP245 (IHC & Oliver) - - 9.25". Good++. (R360, R98)
0239. MORRISON 261 - - 12". Pitting, painted. (R340)
0240. WILKISON PLOW CO - TORONTO NO 90 - (spelling error for Wilkinson) - - 10.5" with hammer head. Excellent. (R489)
0241. 96 - VULCAN PLOW CO 96 / EVANSVILLE IND (with "Cleveland Hardware C-H logo) - - 10" with pitting. (R1-475)
0242. 767 (Monitor-Moline) - - 9" (the scissor wrench). Pitting , new black paint. (R1-332)
0243. W. P. Co. 94 (Wiard Plow Co) - - 11". Good++. (R488)
0244. KNOWLTON (Sycamore, Illinois) / 97 - - 8.5" with small hammer head. Area of light pitting. (R1-286)
0245.
Lot of two: Case Plow wrenches:
(1.) J. I. CASE PLOW WORKS 1222 - - 10.5". Some pitting, painted. (R1-77)
(2.) J.I.C.P. WKS. 359 - - 8.5" with hammer head. Good++. (R1-77)
0246. 040272 (Allis Chalmers) - - 6" tee handled socket wrench. (ID from parts list, not in Rathbone)
0247. TC369 (Allis Chalmers) - - 10". Good++. (R1-11)
0248.
Lot of two: Grand Detour Plow Co. wrenches:
(1.) NO 10 G - - 10" three open end variant. Some pitting. (R1-205)
(2.) 13 - - 7.75" with hammer head. Pitted. (recently ID from parts list, not in Rathbone)
0249. 272 (Kingman Plow and American Seeding Machine) - - 9.5". Light pitting. (R1-284, R2-11)
0250. 1253T (with Case Eagle logo) (Case Threshing Co.) - - 6" Good Plus. (R1-81)
0251. M-H SPARK PLUG WRENCH 202783M1 / MADE IN CANADA - 10". Good Plus. (R1-312)
0252.
Lot of two: J. D. Tower & Sons (Mendota, Illinois) wrenches:
(1.) O - - 8" three open ends variant. Good Plus, painted, (R1-457)
(2.) T - - 10.5" with hammer head. Good++. (R1-457)
Automotive Wrenches and Tools Including Ford "Z" Service Tools
0253. FORD (script) - - 8" curved handle Crescent type wrench. Rarely seen wrench that may have been used at the Ford Factory? Good++.
0254. FORD (script) 5Z165 - - 15" tee handled socket wrench for drive shaft pinion. Excellent.
0255. FORD (script) 5Z829 - - 8.5" box end by ratcheting box end wrench for transmission bands and oil drain. Excellent.
0256. FORD (script) 5Z210 (with a Herbrand logo) - - 13" offset open end wrench for flywheel cap screw. Good++.
0257. FORD (script) 3Z2034 - - 7.5 box end ratchet wrench for transmission band adjustment. Pitted.
0258. FORD (script) 3Z601 (with a Herbrand logo) - - 11.5" offset open end wrench for flywheel cap screw used only Oct. 1917 thru Apr. 1918. Good++.
0259. FORD (script) 5Z249 (with a Mossberg logo) - - 5" soe wrench for the third generator brush. (new style).
0260. FORD (script) 5Z817 (with a Mossberg logo) - - 10.5" offset double hex socket wrench for carburetor and generator bolts. Good++.
0261. HERBRAND (in script) - 2336 - - 12.5" Ford after market wrench for the fourth connecting rod, cylinder head and sparkplug wrench. Advertised in Herbrand's Catalog as fitting "over 65 different nuts on Ford cars". Good++.
0262. FORD BRAKES - 6000 / 7/16 SQ - LECTROLITE - 1/2 SQ - - 11.25" with double eight point box ends. Excellent.
0263. FORD (in script) - - 10" Ford Model "T" Truck sparkplug and cylinder head wrench. Good++.
0264. Lot of two FORD script pliers. One has been modified to use as what look likes a chain riveting tool.
0265.
Lot of two: Ford items.
(1.) FORD (in script) - - T1917 - - 5.5" doe wrench.
(2.) FORD (in script) / 54 - - 1.75" Ford Model "T" ignition key.
0266. Ford (script) - - Ford tool kit copper glad oil can in excellent condition.
0267. Unmarked - - 14" hub cap, lug wrench and tire tool for Whippet and Willys autos.
0268.
Lot of two: Unmarked wooden handled bearing scrapers.
(1.) 15.5"
(2.) 13"
0269. TRANSMISSION WRENCH FOR FORDS - PEP MFG. CO. INC - 33 W. 42 ST. NEW YORK - PAT. PENDING ("Pep" in circle logo)- - 9" ratcheting box end combination tool. Owner's initials on reverse.
0270. CADILLAC (script) (Williams "W" in diamond log) / 29 - - 7" double open end wrench. Spot of light pitting on reverse.
0271.
Lot of two: automobile related tools.
(1.) PRESTO-LITE - - 5.75" tee handled socket wrench for early gas auto lights.
(2.) AF310 / 3 (and a "A' in a circle logo) - - 8.5" early Chevy lug wrench with hammer and tire tool.
0272.
SNAP-ON CF-71 - PAT. 2,645,142 - - 8" unusual sparkplug gap adjuster. Patented July 14, 1953 by Otto Schwenzfeier of McCook, Nebraska. Excellent.
0273.
SNAP-ON - PAT. NO. 1544520 - PWA-1075 - - 6" valve clearance adjusting wrench patented June 30, 1925 by Earl P. Putrow Of Milwaukee, Wisconsin. Made by Snap-On Tools for Pratt & Whitney Aircraft. Also see lot 332 for an early unusual Snap-On ratchet adapter.
0274. INDENT. PLIERS - 429875 - - 8" pliers type cotter key puller or for livestock identification tags or ?
0275. KATY KOTTER PULLER - MPL'S / PAT APLD - - 7.5" Pliers Type Cotter Key Puller.
0276. COTTER PULLER - PAT. MARCH 1912 - BREWER-TITCHENER CORP. - CORTLAND, NY - - 6.75" neat ratcheting plier type cotter key puller.
0277.
Lot of two: Battery pliers.
(1.) HERBRAND - 179 - - 8"
(2.) BLACKHAWK - PT-1259 - - 8"
0278.
PAZZANO / PAT. NO. 19027 - - 8.25" battery pliers. Excellent. Patented by Frederick F. Pazzano of Waltham, Mass. on Feb. 21, 1933 and reissued on Dec. 19, 1933.
0279.
THE TAGIT CO. INC - ROCKFORD, ILL - PAT. NO. 1853846 - - 10" rare battery terminal puller. Patented Apr. 12, 1932 by Fred Borchert of Rockford, Illinois. First one seen. Good++.
0280. Ford (script) - - 6.5" Ford Model "T" tool kit slip joint piers. Good++.
0281. U. D .F. & T. C0 (Utica Tools) - - 5.25" special pliers for Steel-Draulic brakes used on early Buick autos. Some light pitting.
Hardware Company Wrenches
0282. KEENKUTTER (with KeenKutter logo) (E. C. Simmons Hardware Co.) - - 16.5" all metal pipe wrench.
0283. KEENKUTTER (with KeenKutter logo) (E. C. Simmons Hardware Co.) - - 7" all metal pipe wrench. Good++.
0284. LAKESIDE (Montgomery Ward brand) - - 12" wood handled monkey wrench. Good++.
0285. SIMMONS HDW CO - OAK LEAF (with oak leaf logo) - - 12" wood handled monkey wrench.
0286. ENDERS OAK LEAF (with oak leaf logo) ST. LOUIS USA (E. C. Simmons Hardware Co.) - - 8" wood handled monkey wrench. Handle crack, weak markings.
0287. REV-O-NOC - H. S. B. & CO (Hibbard, Spencer, Bartlett & Co., Chicago) - - 10" wooden handled monkey wrench. Good Plus.
0288. DIAMOND EDGE - DE-8 (with diamond logo) / SHAPLEIGH'S - ST. LOUIS USA. - - 8" Crescent type wrench. Good++.
0289. OAK LEAF (with oak leaf logo) - (E. C. Simmons Hardware Co.) - - 9" revolving head leather punch. Two punches missing.
0290. LAKESIDE (Montgomery Ward brand) - - 8" Crescent type. Good Plus.
0291. HIBBARD (Hibbard, Spencer, Bartlett & Co., Chicago) MADE IN USA - - 10" wooden handled Stillson type pipe wrench.
0292.
WINCHESTER -TRADEMARK - MADE IN USA - 1022 - PAT 3-14-22 - (etc) - - 10" Stillson type wood handled pipe wrench patented by Guy Claypool of Hamden, Connecticut and assigned to Winchester Repeating Arms Co. of New Haven, Connecticut. Good++. Also see Choice Lot 73 for a Winchester 18" pipe wrench.
0293.
Lot of two: Wards Lakeside ratcheting double box end wrenches (only one pictured)
(1.) WARDS LAKESIDE - MADE IN USA - - 9.25" 7/8" and 3/4"
(2.) WARDS LAKESIDE - MADE IN USA - - 9.25" 3/8" and 7/17"
H. D. Smith Perfect Handle Wrenches and Other Tools
0294.
THE H. D. SMITH & CO. - MADE IN PLANTSVILLE, CONN. USA / PERFECT HANDLE PATENTED - - 12.75" valve lifter tool with knife type wood handle. William S. Thomson of Plantsville patent of October 16, 1917 applies. Good Plus, no chain and hook as usual.
0295. "THE ORIGINAL" (etc.) - S. I. S. WRENCH 10 / TRADEMARK (with "S" in circle logo) on handle with diamond pattern. - - 10" all metal Perfect Handle monkey wrench. Edge dings. (like S415)
0296. H. D. Smith Perfect Handle ball peen hammer with knife type wood handles. Pat May 28, 07 - - 10" . Patented by William Ward of Plantsville, CT. Minor hammer head chip, handle chips.. http://www.datamp.org/displayPatent.php?pn=855079&id=22431
0297.
Lot of two: Perfect handle screwdrivers.
(1.) 8.5" Size 4 with wing extensions.
(2.) 5.5" size 2.
0298.
Lot of two: Perfect Handle wrenches.
(1.) RUSSWIN - REGISTERED - PAT'D Oct. 30, 1900, Jan 15, 1901, Feb 26, 1901 - - 10" Perfect Handle type monkey wrench.
(2.) PERFECT HANDLE PATENTED./THE H. D. SMITH & CO. - 14 IN - - 13.5" Perfect Handle pipe wrench.
Vise-Grip and Other Locking Pliers
0299.
BMC MFG. CORP. - BINGHAMTON, NY - PATENT APPLIED FOR - - 11.25" adjusting lock pliers. Pat. Feb. 19, 1946 by Francis A. Snell - Chenango Forks, NY. Scarcer large size. (S278)
0300.
VISE-GRIP - DEWITT, NEB - - 9" second model Vise-Grip. First model to have a release lever. Pitted with weak markings, some grind marks. (S262)
0301.
910 GRIP LOCK / CHANNELLOCK INC. MEADVILLE, PA. USA - US PATS. 2531285 - 2576288 - 2997903 - - 9.75" complicated locking pliers with a sliding adjusting collar. Patents by Fritz and Reiner Rommel, Allendorf, Kreis Marburg, Germany; Edward Manspeaker, Turtle Creek, PA; and Murray Eisenberg, New York, NY. Excellent. (S274)
0302. GRANBERG BREAK-N-MEND - - 9.5" Roller chain repair tool in a locking pliers style. Excellent, plated.
Adjustable Wrenches - Group Three
0303. KONGSBERG NO 90 / MADE IN NORWAY - - 8" all metal quick adjust plier type wrench with threaded lower handle with a knurled nut that limits jaw opening similar to more common wrench made by Bahco in Sweden. Excellent.
0304. KONGSBERG NO 92 / MADE IN NORWAY - - 16" size like Lot 303 and 305. Excellent.
0305. KONGSBERG NO 94 / MADE IN NORWAY - - 26" size like Lot 303 and 304. Never seen this type of wrench this large before. Excellent.
0306.
H & E WRENCH CO OF NEW BEDFORD, MASS / PAT MAR 27, 1923, etc.(with logo) - - 13" H & E's pipe wrench version of their Hande wrench. Patentees were Edwin J. Evans and George E. Hemphill both of Salt Lake City, Utah. Excellent (S675). Also see lot 334 for a Hande nut wrench.
0307. Unmarked - -10.5" wooden handled piano turners hammer wrench with telescoping head. Good Plus with one nick on the handle.
0308.
VICTOR TRADEMARK / PAT DEC 23,1902 - AUG 25, 1903 - - 10.75" quick adjust pipe wrench with spring loaded lower jaw and rack adjustment. Made by the Bonner Mfg. Co. of Chrisman, IL and patented by Clarence E. Bonner, Cherrypoint, IL Good Plus. (S653)
0309.
Unmarked - - 3.75" Baxter "S" model double ended wrench, First patented Dec 1, 1868. Pitted. (like S305, C290)
0310.
VICTOR TRADEMARK /BONNER'S PAT DEC 23,1902 - AUG 25, 1903 - - 15.5" quick adjust pipe wrench with spring loaded lower jaw and rack adjustment. Good, with a rather large drilled hang hole. (S653)
0311. 14 CRAFTSMAN / made in USA - - 13" all metal pipe wrench with distinctive handle design from Sears & Roebuck. Excellent. (S597)
0312.
A. HARVEY'S SONS MFG CO LTD DETROIT, MICH / HARVEY'S WRIGHT WRENCH PAT FEB 1910 - NOV 1911 (and A H S in a diamond logo) - - 8.5" quick adjust pipe wrench with rack teeth on side of shaft and sliding lower jaws assembly. Pat. by James F. Wright of Canton, Ohio. Good Plus. (S731)
0313.
(Irland Pipe Wrench Co. Boston, Mass.) Not all markings readable - - 15" Lever operated quick adjust pipe wrench pat 1903, 1905, 1907. Patents were issued to David and Frances Irland of Chicago, IL and Joseph Richards of Melrose, Mass. and Charles Walker of Boston. Light pitting. (S681)
and
and
0314.
WIZARD - THE RICHARDS MFG CO AURORA, ILL - PATENTED MAY 21, 07 OTHER PATS PENDING - - 13" adj wrench that combines a double screw Crescent type adj on a ratcheting head. Patented by Joseph N. Noyer of Gould City, Washington. Good Plus. (S156T)
0315.
HE H. D. SMITH & CO.- 10 IN / PERFECT HANDLE PATENTED - - 10" "S" curved handle Crescent type wrench. Patents by William S. Thomson of Plantsville, CT of May 13, 1913 and Jan. 15, 1915 apply. Good Plus, uncleaned. (S306)
0316.
8 IN NUT GEARENCH (sic) TRADEMARK - FORGED STEEL PAT'D 6-1-26 / GEARENCH MFG CO. - HOUSTON TEXAS - - 8.25" Although this wrench has serrated teeth and it is listed in Schulz under Quick Adjust Pipe Wrenches, it is marked "nut wrench" and it definitely won't work on pipe, but it does work on a hex or square nuts. Patented by Joseph Peterson of College Station, TX. Good++. (S671)
0317. Marked only: "14" (David Bradley) - - 9.75" all malleable sliding wedge adj. alligator wrench. This one is the smooth jawed nut wrench version. Pat 1-6-1891 by Theodore Vandegrift of Shelbyville, Indiana and mfg. by the Vandegrift Mfg Co of Shelbyville, Indiana. Listed in David Bradley Farm Equip. Parts Lists. Excellent. (S546)
0318.
Lot of two:
(1.) PELIKAN - - 8" twin jawed turn handle to adjust nut wrench. Some corrosion. (not listed, no info found)
(2.) BRITISH MADE / A1098 - - 6.5" center screw adjust nut wrench. Small drilled hang hole.
0319. WALWORTH PARMELEE NO. 3 / WALWORTH CO. MADE IN U.S.A. - - 24" girdle type pipe wench with segment for 2-1/2" pipe. Excellent. Like new NOS. (S133)
0320.
WALWORTH-PARMELEE NO. 2 - PAT. 11-19-1907 / WALWORTH CO. BOSTON U.S.A. - - 22" girdle type pipe wench with segments for 1-1/4" pipe. Excellent. Like new NOS. (S133)
0321.
Lot of two: Girdle type pipe wrenches.
(1.) WALWORTH PARMELEE NO. 1 / WALWORTH MFG. CO. BOSTON U.S.A. - - 12" girdle type pipe wench with segments for 3/4" pipe. Excellent. (S133)
(2.) PARMELEE NO. 1 / HARRISON NJ USA - - 12" girdle type pipe wench with segments for 7/8" OD pipe. Excellent but segment pin has been replaced with a bolt. (like S133)
0322. _ A -_N _ R. & SONS (can't read rest) - - 11.5" all metal nut wrench and hammer. Early 1800's English Coach Wrench with hex paneled handle. (like S753 and page 3)
0323. Unmarked - - 11.5" all metal nut wrench and hammer. Early 1800's English Coach Wrench with hex paneled handle. (like S753 and page 3)
0324. 10-12 IN. CRESCENT / 6-8 IN. CRESCENT TOOL CO. - - 12" older style double ended Crescent wrench with 10" and 12" heads. Scarcest of the Crescent double enders as they were the first size to be discontinued. Some nicks, painted. (S470)
0325. 8-10 IN. CRESCENT / PATENTED - CRESCENT TOOL CO. - - 10" older style double ended Crescent wrench with 8" and 10" heads.. Seldom seen early model marked "PATENTED". Good Plus. (S470)
0326. 6-8 IN. CRESTOLOY STEEL / CRESCENT TOOL CO. JAMESTOWN NY - - 8" Older style double ended Crescent wrench with 6" and 8" heads. Good Plus. (S470
0327. 4-6 IN. DROP FORGED / CRESCENT TOOL CO. JAMESTOWN NY - - 6" double ended Crescent wrench with 4" and 6" heads. Scarce smallest size. Good++. (S470)
0328.
PAT AUG, DEC, 1901 (Dudly Tool Co - Memominee, Mich) - - 12" all metal double jaw automotive type nut and pipe wrench. Design patents were issued to Albert Dudly of Menominee, Michigan. Some edge dings and grind marks. (S57)
0329. THE GEM - - 11" all metal double jaw automotive type nut and pipe wrench with tire tool end. Good Plus. (S58)
0330.
Lot of two:
(1.) TRU-GRIP 10" - US PAT. 4375174, (etc.) / DROP FORGED ALLOY STEEL - TAIWAN - - 11" Crescent type with a long lever that tightens the jaws. Patented by Stephen E. Shanley, Jr. of Grosse Ile, Michigan. Good Plus with chrome plating.
(2.) SPACE TOOL FORGED / PO BOX 1924 PASADENA, TEXAS - GOOCH'S BEST FEEDS - - 8.5" qk adj advertising give away almost exactly like the Peterson Helix wrenches. Excellent, plated..
0331. WORCESTER A10 / MADE IN WALDEN USA - - 10" Crescent type with extra distinctive wide, pebble patterned handle. Large lettering. Plated finish, Good Plus.
0332.
Lot of two: Early Snap-on Wrenches (also see lots 272 and 273 for more Snap-On tools)
(1.) Marked only SNAP-ON - PAT PEND. (no date code) - - 3" unusual 1/2" drive socket adapter with two sets of gear teeth that are held apart with a spring allowing for free movement in each direction and when pushed together the gear teeth are engaged, locking the adapter for use in either direction. Patented by Joseph Johnson of Milwaukee. WI on Jan. 30, 1923. This is the first patent issued to the Snap-On Wrench company. Rare snap-On tool, first I have seen. Good++, plated.
(2.) SNAP-ON (no date code) - - 10" 1/2" socket extension, Good Plus plating but shaft has been slightly twisted.
0333.
MADE BY THE LOWNES MFG. CO. - HUNTSVILLE, ALA. / PATENTED APRIL 23, 1889 - FEB 10, 1891 - - 11.5" all metal Stillson type pw with a rotating center section that allows the upper jaw to be inserted vertically or horizontally. Pats. by Sidney Cook and Phineas Lownes both from Orlando, Florida . Some minor pitting, some weak markings. (S612)
0334.
PAT SEPT 20, 1921 - HANDE - MFD BY H & E WRENCH CO. NEW BEDFORD, MASS. (with a H & E logo) - - 10.25" helical screw quick adjust nut wrench. Patentees were Edwin J. Evans and George E. Hemphill both of Salt Lake City, Utah. Good Plus, adjusts smoothly, marked with previous owner's name. (S496). Also see lot 306 for a pipe wrench version.
0335.
JARECKI MFG. CO ERIE PA - PAT April 22, 1873 / 0 - - 13.5" adjustable pipe wrench tongs with lower jaw adjusted with a knurled gear and rack teeth. The Jarecki wrenches were made in six different sizes (No. 0 thru No. 6) under several patents issued to Albert H. Jarecki of Erie, Good++.
href="http://www.datamp.org/displayPatent.php?number=138161&typeCo+de=0">
0336.
JARECKI MFG. CO ERIE PA - PAT April 22, 1873 / 1 - - 14" adjustable pipe wrench tongs like lot 335. Handles have been shortened.
href="http://www.datamp.org/displayPatent.php?number=138161&typeCo+de=0">
0337.
No.1 BULLARD WRENCH / PAT OCT. 27, '03 - - 9.5" self adjusting wrench with spring loaded pivoting upper and lower jaws. Mfg. by the Bullard Automatic Wrench Co. of Providence, Rhode Island under patents issued to Frank Bullard of Los Angeles, CA. on July 7,1903 . Some minor pitting.
0338. No.2 BULLARD WRENCH / PAT OCT. 27, '03 - - 12" self adjusting wrench like lot 337. Some dings.
0339.
Lot of two Acme twist handle wrenches patented by F. H. Seymour's of Detroit, Michigan on Feb 27, 1883. (S365)
(1.) 6" with a Whitman & Barnes logo.
(2.) 8" with a Whitman & Barnes logo. Good Plus with stronger than usual markings.
0340. Acme twist handle wrench with Whitman & Barnes logo - - 12" with strong markings, some dings.
0341. Z 12 IN / PAT APL'D FOR - - 12" malleable iron quick adjust with pipe jaws variant. Pat. Oct. 31, 1905 by Frederick Zwicker of Indianapolis, IN. Pitted. (S732)
0342.
BOOS TOOL CORP CHROME-MOLYBDENUM KC MO - PATENTED - - 9.25" turn handle to adjust nut wrench. Patented by Joseph B. and Lyal R. Boos of Kansas City, Missouri. Scarcer large size. Some nicks, Small weld repair.. (S381)
0343.
RHINO 14 IN - PAT. No. 143898 / RHINO WRENCH CO. DENVER - - 13" self adj. pipe or nut wrench with a spring loaded pivoting upper jaw. Design pat. No. 143898 was issued to Archibald C. Brintnall of Denver, Colorado on Feb 19, 1946. Good++ (S340)
Plier Type Wrenches
0344.
EIFEL-GEARED PLIERRENCH - 8-1/2" - 45 - $4.50 (with two patent numbers) - - 7" plier wrench dated 1945, Less common smaller size. Good Plus..
0345. DUPONT - 5.25" dynamite fuse cutter and crimper pliers. Good++.
0346.
WADE WRENCH CO. - WHITE PIGEON, MICH. (with a "F" in a circle logo) / PAT'D - - 8.5" split handle plier wrench. Pat. Nov. 8, 1927 by William White and July 24, 1928 by Benjamin Wade both of White Pigeon, MI. Excellent (S257)
and
0347.
CLICK PLIERS - CLICK MFG CO FAIRBURY, NEBRASKA / PATS 2358858, 2,325,245., (etc.) - - 9" with a spring loaded u-shaped pin to set the lower jaw to different positions. Pat. Jul. 27, 1943 and Sep. 26, 1944 by Joel Hahn of Beatrice, Nebraska. Excellent.. (S260)
0348.
Lot of two: Unusual pliers type wrench with spring loaded sliding lower jaws. First ones seen.
(1.) KARU - SIRENA-ROMA 16-33 / D.R.P - 2D.R.G.M - - 11". Good++/
(2.) KARU - SIRENA-ROMA 9-22 / D.R.P - 2D.R.G.M - - 6". Good Plus with spots of minor pitting.
0349.
BLEDSOE TRADEMARK (with logo) MINNEAPOLIS / PAT. PENDING - - 8" plier wrench with coarse notched jaws. Pat. May 22, 1917 by Yancy Bledsoe of Bonham, Texas. Scarce small size. Excellent. (S257)
0350. BERNARD NO. 1250-7 IN - WM. SCHOLLHORN CO - NEW HAVEN, CONN - - 7" high quality end nippers. Plated and Excellent.
0351.
GRIPSO NO 10 - BASFORD S.F. USA - PAT. NO. 2600512 - - 7.75" different slip joint pliers. Patented by Homer A. Mead of Turlock, California. Good Plus with nickel plating, Spots of weld arc damage on jaws. (S234)
0352.
KANT-SLIP - PAT ARP 27, 20 - AUG 2, 21 - OTHER PATS. PENDING - / A.D. WRENCH. & TOOL CO (Allan-Diffenbaugh Wrench & Tool Co.) - BARABOO, WIS - - 9.5" plier wrench with a hammer poll. Sliding jaw and handle version. Patented by Allen C. Allan of Baraboo, Wisc. Excellent with original black finish. (S356)
0353. P-300 BERYLCO - - 8.5" brass alloy lineman's type wire cutter and pliers. Excellent with outstanding patina.
0354. 0354. AIRCRAFT TOOLS INC. / AT-508-S - - 6.5" WWII era specialty pliers for Cleco fasteners (special clamps used to hold sheet metal in place while riveting or welding) plus one of the clamps marked MONOGRAM MFG. CO. Used mostly in the aircraft industry. Good++ with a chipped plier bolt head.
Bicycle and Pocket Wrenches
0355.
Unmarked (Boardman's Pat May 30, 1865 And July 10, 1866) - - 6" combination tool with a hammer, nail claw, sc/dr, square socket and tool bit holder (in end of handle), and a nut and pipe wrench. 1865 pat. by A. W. Park of Norwich, Connecticut. 1866 patent (and mfg. by) Bryan Boardman, Norwich, CT, later mfg. by Tower & Lyon. Severe pitting. (S788, C72)
and
0356. CHARLES E. HALL CO. - BUFFALO, NY USA - NO. 13 (with a "H" in a shield logo) - - 6" side screw adjust with hollow handle. Some hammer damage. (not listed)
0357. A B. & R. MFRS. - - 5" center screw adj bicycle wrench. Pitting. (S101T)
0358. U. S. WRENCH CO. - BOHN QUICKFIT - PAT '24 - PHIL. PA - - 5.75" wedge adj, nut wrench. Good Plus with small drilled hang hole. (S547)
0359. A & M BUFFALO, N.Y. - - 5" center screw adj bicycle wrench with a hollow handle. (S114)
0360. Unmarked - - 6.75" bicycle or motorcycle chain repair tool, excellent.
0361.
Unmarked - - 5.5" side screw adjust bike wrench with square stud extension. Looks like wrench marked PAT. OCT 18, 98 which was a design patent issued to Charles H. Metz of Waltham, Mass. Neat well made wrench. Good Plus. (not listed)
0362. 4" / MADE IN GERMANY - - 4.25" Crescent type. Good Plus.
0363. HOUK (Buffalo, NY) - - 5.5" single open end spoke wrench for early auto wire wheels?
IHC and Related Companies Wrenches
0364. CHATTANOOGA CP4003 / (IHC logo )- - 8.5" with hammer head. Pitting. (R1-98)
0365. (IHC logo) P1599 (embossed) / P1599 (debossed) - - 12.5". markings embossed one side and debossed on the other. (R1-255)
0366. IH CO 14327L Williams Forged in USA 207 - - 17" spud wrench. (R1-252)
0367.
Lot of three: P & O / IHC wenches.
(1.) 4359 (P & O) - - 12.5" (R1-370)
(2.) P & O 4129 - - 10.25"
(2.) P & O CO CANTON ILL 4130 - - 9". Some pitting. (R1-370)
0368.
Lot of two: One IHC and one Hercules wrenches.
(1.) Unmarked (097 Hercules & Economy Gas Engine wrench) - - 8" double 'L" socket, Igniter wrench for Hercules Gas and Kerosene Engines.
(2.) IHC P349 - - 7.5" (R1-254)
0369.
Lot of three: IHC wrenches.
(1.) 21264-D (IHC logo) - - 7.5" hex box by open end.
(2.) 12737DA - - 5.5" some pitting.
(3.) 11858DA (IHC logo) - 5.5" spanner (R252)
0370.
Lot of two: IHC wrenches.
(1.) Z786 - Z788 (IHC logo) (IHC part M446M) - - 8.5" malleable adjustable nut wrench (hex nut variation). Good Plus. (R1-256)
(2.) Unmarked IHC loop handled all metal screwdriver - - 8".
0371. MCCORMICK - - 10" wood handled monkey wrench. Good Plus.(R1-320)
0372. DEERING / PAT SEP 7 97 (Vandegrift patent) - 8.5"all metal monkey wrench. Good Plus with some edge mushrooming. (R139)
0373. IHC REFLECTOR FLARE KIT 99594- R93 - - 8.75" NOS steel box with three double reflectors and red flags. This is listed in Gil Irps' IHC Tool list as having an aluminum box, this one is steel. Original cardboard box is worn but reflectors and steel box are Excellent, like new.
Misc. Farm Wrenches - Group Two
0374.
Lot of two: Moline wrenches.
(1.) Unmarked RD2108 (Moline Plow Co) - - 22" stamped steel (parts list pic R1-333)
(2.) Unmarked V4194 (Moline Plow Co) - - 18" stamped steel. Pitted.(parts list pic R1-333)
0375. 25H 3 - ALLOY PRODUCTS CORP. / 25H 3 - WISCONSIN 25H3 - - 20" massive aluminum 4-1/2" open end wrench. Good++. (not in Rathbone).
0376. NATIONAL - - 9" (Good++. R1-346)
0377. 832A (David Bradley) - - 13". Good Plus. (R1-126)
0378. DAVID BRADLEY MFG WKS / BRADLEY ILL 105A - - 9.75" Good Plus. (R1-126)
0379. ET / 119 (David Bradley) - - 10". good Plus with stronger markings than unusual. (R1-126)
0380. DAVID BRADLEY MFG WKS / BRADLEY ILL 105A - - 9.75" Good Plus. Park numbers marked very lightly. (R1-126)
0381.
Lot of three: Deere wrenches.
(1.) D & M - - 6.5"
(2.) DEERE MANSUR CO / A523 - - 6"
(3.) DEERE MANSUR CO A522 - - 7.5"
0382. 379 / S.B.C.P. CO. (in logo) (South Bend Chilled Plow Co, South Bend, Indiana) - - 9" with hammer head. Logo very faintly marked. (R1-429)
0383. TC369 (Allis Chalmers) - - 10". Some pitting. (R1-11)
Fordson, Ford and Ferguson Tractor and Plow Wrenches
0384. FORDSON / 2366 - - 10.5" Fordson tractor socket lug wrench with handle, also used as extension for pry tool. (R1-180)
0385. FORDSON. 6" doe (R1-180)
0386. FORDSON / 2372 - - 11" double hex socket. Excellent. (R1-180)
0387. 9N17014 (with Ford Motor Co. logo) - - 10.5" doe with ruler markings, for Ford tractor plows. Excellent. (R2-101)
0388. Ferguson and 180-108M1 (marked on jaws) with ruler markings) / 11/16 and 1-1/16 - - 10.5" doe (R178)
Orphans and Oddballs
0389. 57 -- 7.5" oddball with hammer head.
0390.
Lot of two: Identical 7.5" four opening wrenches with hammer heads.
(1.) Marked only "S"
(2.) Unmarked
0391.
Lot of three: Orphan wrenches.
(1.) HH - 10".
(2.) 458. 9" farmers S-type.
(3.) Unmarked - - 12" doe with one end at 90 degrees.
0392.HSP - -9.75". Pitted, over cleaned. (R212)
0393.
Lot of two: Orphan wrenches.
(1.) C - - 8" with three openings.
(2.) W 1003 - - 8.5" with two openings.
0394. Unmarked - - 10". (Rathbone's Oddball page 504 upper right)
0395.
Lot of two: unmarked oddball wrenches.
(1.) 7.5" soe with open handle.
(2.) 8" four opening oddball, extra thick and heavy.
0396.
Lot of three: Orphan wrenches.
(1.) R57 - - 5.5"
(2.) S & T - - 5". (R409)
(3.) 81 - - 8", pitted, two small hang holes.
Adjustable Wrenches - Group Four
0397.
PAT PEND. - - 12.25" wood handled version of the Vandegrift sliding wedge quick adjust alligator wrench (smooth jaw variant) Patented by Theodore F. Vandegrift of Shelbyville, Indiana on Pat Sep. 7, 1897. Scarce in this large size. Good++. (S724)
0398.
Unmarked (Bornstein's Imp Wrench Pat. Aug 26, 1890) - - 10" wood handled nut wrench with patented double screw action for fast adjustment with a locking collar. Advertised as Bornstein's Improved Patent Vise Wrench by American Improved Wrench Co. of Boston, Mass. and patented by Henry Bornstein of Boston. Good Plus. (S367)
0399. Marked only PAT APPL'D FOR - - 10" self adjusting spring loaded alligator wrench with screwdriver extension on end of handle. Similar to the Gregory Wrench. Repaired jaws, drilled hang hole. S672.
0400.
12 INCH SHARK PAT PEND'G. / RICHARDS MFG CO AURORA, ILL - - 12" adjustable alligator wrench patented by Herman Paquette of Chicago, ILL. on Jan. 25, 1910. The tip of the bar that locks the upper jaw is broken . (S23)
0401.
THE A. K. LOVELL MAN'F CO. - NEW YORK, NEW YORK - A. K. LOVELL PAT. JUNE 7, 1892 - - 8" wood handled helix screw quick adjust nut wrench with a locking button. Patent 476,767 was issued to Albert K. Lovell of Jackson, Michigan Very rare wrench in good condition with some light pitting and some file marks on edges. (S401)
0402.
UTILITY WRENCH CO LD. NEW YORK - PAT'S -AUG 13, 1878 - SEPT 4, 1883 - - 7.25" Wooden handled quick adjust nut rack wrench with a release lever and ultra fine rack teeth. High quality materials and workmanship. Patented by Henry W. Atwater of Newton, Mass. Good Plus with a few minor edge dings, previous owner's initials on handle. (S541)
0403.
BAUMO (with arrow logo) PATENTED - 14 - SERIAL NO. 1-14 - PATENTED 4-23-35 / MFG BY JOHN W. BAUMNAN & SONS SASSAMANSVILLE, PA (etc.) - - 12.75" qk adjust rack type pipe wrench with lever that controls the upper jaw. (S651)
0404.
THE MECHANICS WRENCH CO. PROV. R. I. - PAT. APR. 27, 69 - - 8" curved handled all metal adjustable nut wrench. The first of the "S' handled adjustable wrenches. Patented by George C. Taft of Worcester, MA, Early patented scarce wrench in good condition, some weak markings..
0405. H & D CO - CHICAGO - - 8.25". A pair of beautifully plated plier type tools with threaded ends for extensions. I would guess these would of been used by a horse dentist. Excellent with nickel plating.
0406.
TROJAN - TROJAN WRENCHES L. A. CAL. / US PAT NO 1968783 - - 11.5" qk adj pipe wrench with a lever that releases the rack teeth from the upper jaw assembly. Patented by John R. Long, of Los Angeles, CA. Good Plus (S721)
0407.
MYERS COMBINATION WRENCH MILWAUKEE WIS - - 8.5" quick adjust rack nut wrench with a lever for final tightening. Patented by William M. Myers of St. Joseph, Missouri, February 14, 1922. Good Plus with spots of minor pitting. (S560).
0408.
LEVER WRENCH CO DULUTH, MINN / HEIMBACK PATENT 1915 - - 10" quick adjust nut wrench with lever and rack teeth. Patented 6-8-1915 by Alton Heimbach of Duluth. Good++ with stronger marking than usually seen. (S308)
0409.
BAY STATE TOOL CO BOSTON / PAT JUNE 7, 1904 - - 12" all metal quick adjust nut wrench with locking lever. Pat by Fredrick Walden (who later started Walden Mfg Co). Weld repair on handle. (S476)
0410.
A. G. COES & CO. - WORCESTER MASS / A.G. COES PAT'' MAR 6, 1866 - - 10" jog bar wood handled monkey wrench. Good++, strong markings. (Page No.17)
0411.
HEWET'S UNION WRENCH PAT JAN 25, 64 (can't read all of the markings) / CROTON FALLS. N. Y - - 10" wood handled nut wrench with a threaded hollow sleeve with a fluted grip. Jan 25, 1864 is the antedate for Henry Hewet's (of New York , NY) March 22, 1864 patent for this wrench. An early historically important wrench with a striking appearance. Good++, professionally detailed. (S397)
0412.
Lot of two: Adjustable wrenches.
(1.) PAT MAY 30, 1865 AND JULY 10, 1866 (Boardman's) - - 8" combination tool with a hammer, nail claw, sc/dr, square socket and tool bit holder (in end of handle), and a nut and pipe wrench. 1865 pat. by A. W. Park of Norwich, Connecticut. 1866 patent (and mfg. by) Bryan Boardman, Norwich, CT, later mfg. by Tower & Lyon. Missing pipe jaw insert. (S788, C72)
and
(2.) Coes Jog Bar (can't read markings) - - 8" wood handled monkey wrench. Replaced handle, drilled holes in ferrule.
0413. MFD BY CRESCENT FORGINGS CO.- OAKMONT PA / PATENT APPLIED FOR - CRESCO TRADEMARK - - 8.25" all metal screw adjust nut wrench. Rare wrench in Good++ condition.(S386, C110)
0414.
Lot of two: Six inch curved handled Crescent type wrenches.
(1.) B & C .
(2.) BILLINGS & SPENCER.
Note: The descriptions for Lots 415 thru 515 were written by the consignors. I have not seen the wrenches
0415.
FAIRBANKS 14 IN // PAT MAY 17 1904 pipe wr. (pat #760,063)
0416. ELASTIC TIP CO. PAT"D MARCH 26, 1895 (5 1/2 in) (S#98, dn 3)
0417. AETNA PAT. AUG. 18, 98 (5 1/2 in) (pat # 609,146) (some teeth bent and broke) http://www.datamp.org/displayPatent.php?number=609146&typeCode=0
0418. HERCULES WRENCH GERMANY (8 fold-out wrenches - 1 tip broke) (4 1/2 in.) (see MVWC Mar. 2001, pg. 4)
0419.
USE ONLY WRENCH TO OPEN OR CLOSE / PAT 2543151 (barrel plug and agitator crank) (pat # 2,543,151)
0420. LA PORTE // 2812 "D in circle foundry mark" (R v. 1, pg. 290) buggy wr (very good condition)
0421. Lot of three: BLEDSOE trade mark MINNEAPOLIS // PAT PENDING pliers: 8" & 10 1/2" fixed pivot & 10 1/2" three-position slip joint
0422. Adams Pious 16" pipe wrench, S583, vgc.
0423. Spery 17" pipe wrench, S742, vgc.
0424. Galvanized . Ratchet with fixed socket, No info. 14", vgc.
0425. W & B twist handle MW, 10", C330.
0426. #885 cast farm wrench, (hub cap)?, No Info.
0427. Baxter, 10", S461, Good.
0428. Baxter, 8", S461, good.
0429.
Bostwick roller jaw pipe wrench, 12", C74, vgc.
0430. Pressed steel hub cap wrench with spanner, 10",rusty, No Info.
0431. "T" farm wrench I H R255
0432. Plier wrench, forged handle, 13", looks like Ripley 1857.
0433. Coes notch back, 15" MW Good,
0434. Coes notch back MW, 8", steam engine logo, good.
0435. Cockshut 14.25" BC126, R106.
0436. G. L. James, buggy wrench, 15", S239.
0437. 2020-30-W, 6" farm wrench, No Info.
0438. Mossberg 5" bicycle wrench, vgc.
0439. Billings & Spencer bicycle wrench, 4.25", vgc.
0440. Tear Drop farm wrench, 6.75", No Info.
0441. Triangle Armored cable tool, 12", excellent.
0442. Gordon Automatic 7.25", S493.
0443. Boardman's, Tower and Lyon, 6", repaired, VGC, S788.
0444. Wright, 6", pitted,
0445. Iron Age cut out wrench, E39, S492.
0446. Coes 6.5", Bulb Handle.
0447. Girard MW, 10"Fair, C143.
0448. Vandegrift, 5.5" Loop Handle MW, S546.
0449. American 9.5', Fluted Handle MW, VGC, S231B.
0450. Gordon Automatic, 8", Repaired, S493.
0451. Walter A. Wood, 7.25", R494, left.
0452. Babcock, Buggy wrench, 8.5", R36 Top.
0453. Babcock Buggy Wr. 9.5", 1-BE, 3-OE.
0454. Wood 11.25", DOE, R494.
0455. Wood, 10.25" R494 Bottom Right.
0456. Coes, 5" Steel Handle MW.
0457. Hoe, Self Adjust P. W. C169.
0458. Diamond 5.5" Wagon Wrench, vgc, S204.
0459. Hardy & Carter, 4.75" bicycle Wrench, VGC, S99.
0460. Whitman & Barnes, 6.75" Monkey Wrench, Unusual Logo.
0461. Gates Bull, 10.25", Lorian, S391.
0462. Billings & Spencer, Pope, Bicycle Wrench, 5.5", S111 Top.
0463. W & M farm wrench, 8", R477, No Info.
0464. David Bradley 105A, 9.75", R126 Top.
0465. Vandegrift Wood Handle MW, 7.5", S966.
0466. Dalzell Buggy Wrench #14, 9.75", R123-3D.
0467. Lot of three: Two adjustable and one fixed Spanner wrenches.
0468. Lot of three: "A" Loop Handle Farm Wrench, & two others, No Info.
0469. Oliver 10, Skeleton Wrench, 6", R360.
0470. Lot of two: 231 Farm Wrench and 6" (no info).
0471. Allen, Chas. G. 32 Rake Wrench. R9-Right.
0472. Lot of four: Unidentified Farm Wrenches.
0473. Lot of Three: One Herbrand Script MW, one Boos 8", and one B & C "S" 6".
0474. Lot of four: One Oil Valve Wrench, One JD52, one Glenwood Stove, and one unknown.
0475. 5.75" Hartford Hardware Co. Hartford, CT. PAT. JAN 29, 1901 Excellent Condition.
0476.
Lot of three: Bicycle Wrenches all 5.5" long.
(1.) Billings & Spencer marked Pope MFG. Co.
(2.) "Victor" Overman Wheel Co. PAT. January 6, 1891.
(3.) Model 96 Billings & Spencer Marked Waverley.
0477.
Lot of five: Bicycle or Pocket Wrenches
(1.) AG & J Products - - 3" pocket wrench with screw driver.
(2.) Marked only USA - - 3" pocket wrench with screw driver.
(3.) Unmarked - - 3" pocket wrench with screw driver.
(4.) Unmarked - - 3" pocket wrench with screw driver.
(5.) Marked only PAT D227.192 - - 1.5" brass and steel adjustable monkey wrench.
0478.
Lot of three: Bicycle or Pocket Wrenches
(1.) Mossberg Junior No. 1
(2.) Unmarked
(3.) Unmarked
0479.
Lot of two: Cronk & Carrier Mfg. Co. Elmira, NY Adjustable Alligator Wrenches
(1.) 6.5".
(2.) 9".
0480. Unmarked Cronk & Carrier MFG. Co. Elmira, NY Adj. Alligator 7.5". Excellent.
0481. 13" New Cassidy Plow imp. wrench. Marked NC
0482. Oliver RP 210 - - 13.5" implement wrench
0483. Planet Jr. H-4, 8.25"
0484. Buffalo Pitts cut-out imp. wrench 10.25"
0485.
Lot of two: Boardman Combination Wrenches - Patent. May 30, 1865 and July 10, 1866,
and
(1.) 6.25" Excellent Condition
(2.) 8" Repaired jaw.
0486. Special Purpose Adj. Pipe wrench with 1" opening. Marked "171E840-1M W. C". Unknown MFG.
0487. B & C combination double end nut and pipe wrench NO. 51-6", pitted
0488.
Bornstein PAT. July 26, 1892 - 5" bicycle wrench with locking ring. John A. W. Seabery Machine. Co. Malden, Mass.
0489.
Lot of two: Gem Pocket Wrenches
(1.) Tower & Lyons, New York, NY. 3.25" marked GEM
(2.) 4.25" Unmarked. Nickel plated.
0490. UNIVERSAL TOOL CO - SPRINGFIELD, MASS - MILLEA'S EMERGENCY TOOL - PAT. FEB 10,1903. - - 7" Combination wrench with pipe cutter The adjusting screw has been professionally weld repaired, otherwise excellent condition with nickel plating.
0491.
Lot of two: Adjustable Wrenches
(1.) COES Wrench PAT. DEC 24, 1901 (patented by Frederick Searle of Worcester, Mass.) - - 5"
(2.) "Girder minor style" English adj. wrench marked "Steel" 3.5
0492. Granite State Lawn Mowers Hinsdale, NH - - 4.5" pressed steel.
0493. Any Angle Wrench Lima, OH - PAT NOV 1916 - - 8.5" adj. wrench.
0494.
Lot of two: Wood Handled Adjustable Wrenches
(1.) L & S Co. Cleveland, OH Steel Bicycle 5" Excellent Condition
(2.) 5.5" Diamond wrench - - rough condition.
0495. Klein Tools, Inc. adjustable crescent wrench with spud bar 16" - - new.
0496.
Lot of Two: Combination Pliers Tools both Chrome Plated
(1.) 6.5"
(2.) 4.75".
0497. Winner Tool Co. quick adj wrench - - Puyallup, WA 6.5"
0498. Diamond Wrench Co. Portland, ME PAT. NOV 2 80 - OCT 16 83 - 10.5" - - cracked wood handle.
0499. A. P. JOY NO.1 adj. wagon wrench Rockingham, NH - 10"
0500.
Lot of two: Wakefield Wizard No.120 Adjustable Wrench
(1.) 8"
(2.) 8"
0501.
Lot of two: Pivoting Head Open End wrenches
(1.) Crandall Expert PAT. Applied for 7.5".
(2.) Stephan's Wrench PAT. DEC 21, 09 -9.5"
0502.
A. P. JOY NO. 1 adj. wagon wrench 10.5" Rockingham, NH
0503.
Lot of two: 6.5" Monkey wrenches both in Excellent condition
(1.) PEXTO "Made in USA" one piece wood handle.
(2.) One piece steel handle wrench.
0504. 10" AMPCO Crescent wrench marked "AL BR P/N W-72"
0505. NO. TR-20 Made in USA - - 15.5" adjustable thread cutting tool.
